[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <4ea6e548-db54-a3cc-751e-42700d76704f@arm.com>
Date: Thu, 15 Jul 2021 09:24:05 +0530
From: Anshuman Khandual <anshuman.khandual@....com>
To: Suzuki K Poulose <suzuki.poulose@....com>,
linux-arm-kernel@...ts.infradead.org
Cc: coresight@...ts.linaro.org, linux-kernel@...r.kernel.org,
al.grant@....com, leo.yan@...aro.org, mathieu.poirier@...aro.org,
mike.leach@...aro.org, peterz@...radead.org, Tamas.Zsoldos@....com,
will@...nel.org
Subject: Re: [PATCH 3/5] coresight: trbe: Keep TRBE disabled on overflow irq
On 7/12/21 5:08 PM, Suzuki K Poulose wrote:
> When an AUX buffer is marked TRUNCATED, the kernel will disable
> the event (via irq_work) and can only be re-enabled by the
> userspace tool.
Will it be renabled via normal perf event enable callback OR an
explicit perf event restart is required upon the TRUNCATED flag ?
>
> Also, since we *always* mark the buffer as TRUNCATED (which is
> needs to be reconsidered, see below), we need not re-enable the
> TRBE as the event is going to be now disabled. This follows the
> SPE driver behavior.
>
> Without this change, we could leave the event disabled for
> ever under certain conditions. i.e, when we try to re-enable
> in the IRQ handler, if there is no space left in the buffer,
> we "TRUNCATE" the buffer and create a record of size 0.
> The perf tool skips such records and the event will remain
> disabled forever.
Why ? Should not the user space tool explicitly start back the
tracing event after detecting zero sized record with buffer
marked with TRUNCATE flag ? What prevents it to restart the
event ?
>
> Regarding the use of TRUNCATED flag:
> With FILL mode, the TRBE stops collection when the buffer is
> full, raising the IRQ. Now, since the IRQ is asynchronous,
> we could loose some amount of trace, after the buffer was
> full until the IRQ is handled. Also the last packet may
> have been trimmed. The decoder can figure this out and
> cope with this. The side effect of this approach is:
>
> We always disable the event when there is an IRQ, even
> when the other half of the ring buffer is free ! This
> is not ideal.
>
> Now, we should switch to using PARTIAL to indicate that there
> was potentially some partial trace packets in the buffer and
> some data was lost. We should use TRUNCATED only when there
> is absolutely no space in the ring buffer. This change would
> also require some additional changes in the CoreSight PMU
> framework to allow, sinks to "close" the handle (rather
> than the PMU driver closing the handle upon event_stop).
> So, until that is sorted, let us keep the TRUNCATED flag
> and the rework can be addressed separately.
But I guess this is a separate problem all together.
>
> Fixes: 3fbf7f011f24 ("coresight: sink: Add TRBE driver")
> Reported-by: Tamas Zsoldos <Tamas.Zsoldos@....com>
> Cc: Anshuman Khandual <anshuman.khandual@....com>
> Cc: Mathieu Poirier <mathieu.poirier@...aro.org>
> Cc: Mike Leach <mike.leach@...aro.org>
> Cc: Leo Yan <leo.yan@...aro.org>
> Cc: Peter Zijlstra (Intel) <peterz@...radead.org>
> Cc: Will Deacon <will@...nel.org>
> Signed-off-by: Suzuki K Poulose <suzuki.poulose@....com>
> ---
> drivers/hwtracing/coresight/coresight-trbe.c | 34 +++++++-------------
> 1 file changed, 12 insertions(+), 22 deletions(-)
>
> diff --git a/drivers/hwtracing/coresight/coresight-trbe.c b/drivers/hwtracing/coresight/coresight-trbe.c
> index 176868496879..ec38cf17b693 100644
> --- a/drivers/hwtracing/coresight/coresight-trbe.c
> +++ b/drivers/hwtracing/coresight/coresight-trbe.c
> @@ -696,10 +696,8 @@ static void trbe_handle_spurious(struct perf_output_handle *handle)
>
> static void trbe_handle_overflow(struct perf_output_handle *handle)
> {
> - struct perf_event *event = handle->event;
> struct trbe_buf *buf = etm_perf_sink_config(handle);
> unsigned long offset, size;
> - struct etm_event_data *event_data;
>
> offset = get_trbe_limit_pointer() - get_trbe_base_pointer();
> size = offset - PERF_IDX2OFF(handle->head, buf);
> @@ -709,30 +707,22 @@ static void trbe_handle_overflow(struct perf_output_handle *handle)
> /*
> * Mark the buffer as truncated, as we have stopped the trace
> * collection upon the WRAP event, without stopping the source.
> + *
> + * We don't re-enable the TRBE here, as the event is
> + * bound to be disabled due to the TRUNCATED flag.
> + * This is not ideal, as we could use the available space in
> + * the ring buffer and continue the tracing.
> + *
> + * TODO: Revisit the use of TRUNCATED flag and may be instead use
> + * PARTIAL, to indicate trace may contain partial packets.
> + * And TRUNCATED can be used only if we do not have enough space
> + * in the buffer. This would need additional changes in
> + * etm_event_stop() to allow the sinks to leave a closed
> + * aux_handle.
> */
> perf_aux_output_flag(handle, PERF_AUX_FLAG_CORESIGHT_FORMAT_RAW |
> PERF_AUX_FLAG_TRUNCATED);
> perf_aux_output_end(handle, size);
> - event_data = perf_aux_output_begin(handle, event);
> - if (!event_data) {
> - /*
> - * We are unable to restart the trace collection,
> - * thus leave the TRBE disabled. The etm-perf driver
> - * is able to detect this with a disconnected handle
> - * (handle->event = NULL).
> - */
> - trbe_drain_and_disable_local();
> - *this_cpu_ptr(buf->cpudata->drvdata->handle) = NULL;
> - return;
> - }
> - buf->trbe_limit = compute_trbe_buffer_limit(handle);
> - buf->trbe_write = buf->trbe_base + PERF_IDX2OFF(handle->head, buf);
> - if (buf->trbe_limit == buf->trbe_base) {
> - trbe_stop_and_truncate_event(handle);
> - return;
> - }
> - *this_cpu_ptr(buf->cpudata->drvdata->handle) = handle;
> - trbe_enable_hw(buf);
> }
The change here just stops the event restart after handling the IRQ
and marking the buffer with PERF_AUX_FLAG_TRUNCATED which helps the
event from being disabled for ever (still need to understand how !).
I guess it might be better to separate out the problems with using
PERF_AUX_FLAG_TRUNCATED and related aspects, in a subsequent patch
which just updates the code with the above TODO comment ?
>
> static bool is_perf_trbe(struct perf_output_handle *handle)
>
Powered by blists - more mailing lists