Message-ID: <87lf672wdd.fsf@linux.ibm.com>
Date:   Thu, 15 Jul 2021 16:46:38 -0300
From:   Fabiano Rosas <farosas@...ux.ibm.com>
To:     Pratik Sampat <psampat@...ux.ibm.com>, mpe@...erman.id.au,
        benh@...nel.crashing.org, paulus@...ba.org,
        linuxppc-dev@...ts.ozlabs.org, kvm-ppc@...r.kernel.org,
        linux-kernel@...r.kernel.org, pratik.r.sampat@...il.com
Subject: Re: [PATCH v3 1/1] powerpc/pseries: Interface to represent PAPR
 firmware attributes

Pratik Sampat <psampat@...ux.ibm.com> writes:

> Hello,
>
> On 12/07/21 9:13 pm, Fabiano Rosas wrote:
>> "Pratik R. Sampat" <psampat@...ux.ibm.com> writes:
>>
>> Hi, have you seen Documentation/core-api/kobject.rst, particularly the
>> part that says:
>>
>> "When you see a sysfs directory full of other directories, generally each
>>     of those directories corresponds to a kobject in the same kset."
>>
>> Taking a look at samples/kobject/kset-example.c, it seems to provide an
>> overall structure that is closer to what other modules do when creating
>> sysfs entries. It uses less dynamic allocations and deals a bit better
>> with cleaning up the state afterwards.
>>
> Thank you for pointing me towards this example, the kset approach is
> interesting and the example indeed does handle cleanups better.
>
> Currently, we use "machine_device_initcall()" to register this
> functionality, do you suggest I convert this into a tristate module
> instead where I can include a "module_exit" for cleanups?

Ugh.. I was hoping we could get away with having all cleanups done at
kobject release time. But now I see that it is not called unless we
decrement the reference count. Nevermind then.

>>> +	ret = plpar_hcall_norets(H_GET_ENERGY_SCALE_INFO, ESI_FLAGS_ALL, 0,
>>> +				 virt_to_phys(esi_buf), MAX_BUF_SZ);
>>> +	esi_hdr = (struct h_energy_scale_info_hdr *) esi_buf;
>>> +	if (ret != H_SUCCESS || esi_hdr->data_header_version != ESI_VERSION) {
>> I really dislike this. If you want to bail due to version change, then
>> at least include in the ABI document that we might not give the
>> userspace any data at all.
>
> My only concern for having a version check is that, the attribute list
> can change as well as the attributes itself may change.
> If that is the case, then in a newer version if we do not bail out we
> may parse data into our structs incorrectly.

Sure, that is a valid concern. But the documentation for the header
version field says:

  "Version of the Header. The header will be always backward compatible,
  and changes will not impact the Array of attributes. Current version =
  0x01"

I guess this is a bit vague still, but I understood that:

1- header elements continue to exist at the same position;
2- the format of the array of attributes will not change.

Are you saying that my interpretation above is not correct or that you
don't trust the HV to enforce it?

> My argument only hinges on that we should likely give no data at all
> instead of junk or incorrect data.

I agree. I just don't think it would be possible to end up with
incorrect data, unless the HV has a bug.

> Maybe I could make this check after the return check and give out a
> version mismatch message like the following?
> pr_warn("hcall failed: H_GET_ENERGY_SCALE_INFO VER MISMATCH - EXP: 0x%x, REC: 0x%x",
>          ESI_VERSION, esi_hdr->data_header_version);

Yes, this will help with debug if we ever end up in this situation.

>>> +		pr_warn("hcall failed: H_GET_ENERGY_SCALE_INFO");
>>> +		goto out;
>>> +	}
>>> +
>>> +	num_attrs = be64_to_cpu(esi_hdr->num_attrs);
>>> +	/*
>>> +	 * Typecast the energy buffer to the attribute structure at the offset
>>> +	 * specified in the buffer
>>> +	 */
>> I think the code is now simple enough that this comment could be
>> removed.
>
> ack
>
>>> +	esi_attrs = (struct energy_scale_attribute *)
>>> +		    (esi_buf + be64_to_cpu(esi_hdr->array_offset));
>>> +
>>> +	pgs = kcalloc(num_attrs, sizeof(*pgs), GFP_KERNEL);
>> This is never freed.
>>
>>> +	if (!pgs)
>>> +		goto out_pgs;
>>> +
>>> +	papr_kobj = kobject_create_and_add("papr", firmware_kobj);
>>> +	if (!papr_kobj) {
>>> +		pr_warn("kobject_create_and_add papr failed\n");
>>> +		goto out_kobj;
>>> +	}
>>> +
>>> +	esi_kobj = kobject_create_and_add("energy_scale_info", papr_kobj);
>>> +	if (!esi_kobj) {
>>> +		pr_warn("kobject_create_and_add energy_scale_info failed\n");
>>> +		goto out_ekobj;
>>> +	}
>>> +
>>> +	for (idx = 0; idx < num_attrs; idx++) {
>>> +		char buf[4];
>>> +		bool show_val_desc = true;
>>> +
>>> +		pgs[idx].pgattrs = kcalloc(MAX_ATTRS,
>>> +					   sizeof(*pgs[idx].pgattrs),
>>> +					   GFP_KERNEL);
>>> +		if (!pgs[idx].pgattrs)
>>> +			goto out_kobj;
>>> +
>>> +		pgs[idx].pg.attrs = kcalloc(MAX_ATTRS + 1,
>>> +					    sizeof(*pgs[idx].pg.attrs),
>>> +					    GFP_KERNEL);
>> I think the kobject code expects this to be statically allocated, so
>> you'd need to override the release function in some way to be able to
>> free this.
>
> Right this and pgs both are never free'd because my understanding was
> that as this functionality is invoked from machine_init, I'd expect it
> to stay until shutdown.

Yep, I thought the kset code would improve this, but I misread it. So
I'm fine with keeping it like this.

> However, if you believe that a module approach is cleaner, I can change
> my implementation to accommodate for that and also include a
> module_exit for cleanup of the above allocations
>>> +		if (!pgs[idx].pg.attrs) {
>>> +			kfree(pgs[idx].pgattrs);
>>> +			goto out_kobj;
>>> +		}
>>> +
>>> +		sprintf(buf, "%lld", be64_to_cpu(esi_attrs[idx].id));
>> Do you mean pgs[idx].name instead of buf? Otherwise you're passing this
>> stack allocated 'buf' to another function.
>>
> Yes you're right I should have either passed the pg struct or I should
> have used strcpy, here the stack allocated buffer is being taken out of
> scope which is incorrect.
> Thanks for pointing this out!
>
>>> +		pgs[idx].pg.name = buf;
>>> +
>>> +		/* Do not add the value description if it does not exist */
>>> +		if (strlen(esi_attrs[idx].value_desc) == 0)
>>> +			show_val_desc = false;
>>> +
>>> +		if (add_attr_group(be64_to_cpu(esi_attrs[idx].id),
>>> +				   MAX_ATTRS, &pgs[idx], show_val_desc)) {
>>> +			pr_warn("Failed to create papr attribute group %s\n",
>>> +				pgs[idx].pg.name);
>>> +			goto out_pgattrs;
>>> +		}
>>> +	}
>>> +
>>> +	return 0;
>>> +
>>> +out_pgattrs:
>>> +	for (i = 0; i < MAX_ATTRS; i++) {
>>> +		kfree(pgs[i].pgattrs);
>>> +		kfree(pgs[i].pg.attrs);
>>> +	}
>>> +out_ekobj:
>>> +	kobject_put(esi_kobj);
>>> +out_kobj:
>>> +	kobject_put(papr_kobj);
>>> +out_pgs:
>>> +	kfree(pgs);
>>> +out:
>>> +	kfree(esi_buf);
>>> +
>>> +	return -ENOMEM;
>>> +}
>>> +
>>> +machine_device_initcall(pseries, papr_init);

Powered by blists - more mailing lists