Message-ID: <YPHZ5cCv+I/hLO08@t490s>
Date:   Fri, 16 Jul 2021 15:11:33 -0400
From:   Peter Xu <peterx@...hat.com>
To:     Alistair Popple <apopple@...dia.com>
Cc:     linux-mm@...ck.org, linux-kernel@...r.kernel.org,
        Jason Gunthorpe <jgg@...pe.ca>,
        Mike Kravetz <mike.kravetz@...cle.com>,
        David Hildenbrand <david@...hat.com>,
        Matthew Wilcox <willy@...radead.org>,
        "Kirill A . Shutemov" <kirill@...temov.name>,
        Hugh Dickins <hughd@...gle.com>,
        Tiberiu Georgescu <tiberiu.georgescu@...anix.com>,
        Andrea Arcangeli <aarcange@...hat.com>,
        Axel Rasmussen <axelrasmussen@...gle.com>,
        Nadav Amit <nadav.amit@...il.com>,
        Mike Rapoport <rppt@...ux.vnet.ibm.com>,
        Jerome Glisse <jglisse@...hat.com>,
        Andrew Morton <akpm@...ux-foundation.org>,
        Miaohe Lin <linmiaohe@...wei.com>
Subject: Re: [PATCH v5 05/26] mm/swap: Introduce the idea of special swap ptes

On Fri, Jul 16, 2021 at 03:50:52PM +1000, Alistair Popple wrote:
> Hi Peter,
> 
> [...]
> 
> > diff --git a/mm/memcontrol.c b/mm/memcontrol.c
> > index ae1f5d0cb581..4b46c099ad94 100644
> > --- a/mm/memcontrol.c
> > +++ b/mm/memcontrol.c
> > @@ -5738,7 +5738,7 @@ static enum mc_target_type get_mctgt_type(struct vm_area_struct *vma,
> >  
> >  	if (pte_present(ptent))
> >  		page = mc_handle_present_pte(vma, addr, ptent);
> > -	else if (is_swap_pte(ptent))
> > +	else if (pte_has_swap_entry(ptent))
> >  		page = mc_handle_swap_pte(vma, ptent, &ent);
> >  	else if (pte_none(ptent))
> >  		page = mc_handle_file_pte(vma, addr, ptent, &ent);
> 
> As I understand things pte_none() == False for a special swap pte, but
> shouldn't this be treated as pte_none() here? Ie. does this need to be
> pte_none(ptent) || is_swap_special_pte() here?

Looks correct; here the page/swap cache could hide behind the special pte just
like a none pte.  Will fix it.  Thanks!

> 
> > diff --git a/mm/memory.c b/mm/memory.c
> > index 0e0de08a2cd5..998a4f9a3744 100644
> > --- a/mm/memory.c
> > +++ b/mm/memory.c
> > @@ -3491,6 +3491,13 @@ vm_fault_t do_swap_page(struct vm_fault *vmf)
> >  	if (!pte_unmap_same(vmf))
> >  		goto out;
> >  
> > +	/*
> > +	 * We should never call do_swap_page upon a swap special pte; just be
> > +	 * safe to bail out if it happens.
> > +	 */
> > +	if (WARN_ON_ONCE(is_swap_special_pte(vmf->orig_pte)))
> > +		goto out;
> > +
> >  	entry = pte_to_swp_entry(vmf->orig_pte);
> >  	if (unlikely(non_swap_entry(entry))) {
> >  		if (is_migration_entry(entry)) {
> 
> Are there other changes required here? Because we can end up with stale special
> pte's and a special pte is !pte_none don't we need to fix some of the !pte_none
> checks in these functions:
> 
> insert_pfn() -> checks for !pte_none
> remap_pte_range() -> BUG_ON(!pte_none)
> apply_to_pte_range() -> didn't check further but it tests for !pte_none
> 
> In general it feels like I might be missing something here though. There are
> plenty of checks in the kernel for pte_none() which haven't been updated. Is
> there some rule that says none of those paths can see a special pte?

My rule on doing this was to only care about vma that can be backed by RAM,
majorly shmem/hugetlb, so the special pte can only exist there within those
vmas.  I believe in most pte_none() users this special pte won't exist.

So if it's not related to RAM backed memory at all, maybe it's fine to keep the
pte_none() usage like before.

Take the example of insert_pfn() referenced first - I think it can be used to
map some MMIO regions, but I don't think we'll call that upon a RAM region
(either shmem or hugetlb), nor can it be uffd wr-protected.  So I'm not sure
adding special pte check there would be helpful.

apply_to_pte_range() seems to be a bit special - I think the pte_fn_t matters
more on whether the special pte will matter.  I had a quick look, it seems
still be used mostly by all kinds of driver code not mm core.  It's used in two
forms:

        apply_to_page_range
        apply_to_existing_page_range

The first one creates ptes only, so it ignores the pte_none() check so I skipped.

The second one has two call sites:

*** arch/powerpc/mm/pageattr.c:
change_memory_attr[99]         return apply_to_existing_page_range(&init_mm, start, size,
set_memory_attr[132]           return apply_to_existing_page_range(&init_mm, start, sz, set_page_attr,

*** mm/kasan/shadow.c:
kasan_release_vmalloc[485]     apply_to_existing_page_range(&init_mm,

I'll leave the ppc callers for now as uffd-wp is not even supported there.  The
kasan_release_vmalloc() should be for kernel allocated memories only, so should
not be a target for special pte either.

So indeed it's hard to 100% cover all pte_none() users to make sure things are
used right.  As stated above I still believe most callers don't need that, but
the worst case is if someone triggered uffd-wp issues with a specific feature,
we can look into it.  I am not sure whether it's good we add this for all the
pte_none() users, because mostly they'll be useless checks, imho.

So far what I planned to do is to cover most things we know that may be
affected like this patch so the change may bring a difference, hopefully we
won't miss any important spots.

> 
> > diff --git a/mm/migrate.c b/mm/migrate.c
> > index 23cbd9de030b..b477d0d5f911 100644
> > --- a/mm/migrate.c
> > +++ b/mm/migrate.c
> > @@ -294,7 +294,7 @@ void __migration_entry_wait(struct mm_struct *mm, pte_t *ptep,
> >  
> >  	spin_lock(ptl);
> >  	pte = *ptep;
> > -	if (!is_swap_pte(pte))
> > +	if (!pte_has_swap_entry(pte))
> >  		goto out;
> >  
> >  	entry = pte_to_swp_entry(pte);
> > @@ -2276,7 +2276,7 @@ static int migrate_vma_collect_pmd(pmd_t *pmdp,
> >  
> >  		pte = *ptep;
> >  
> > -		if (pte_none(pte)) {
> > +		if (pte_none(pte) || is_swap_special_pte(pte)) {
> 
> I was wondering if we can loose the special pte information here? However I see
> that in migrate_vma_insert_page() we check again and fail the migration if
> !pte_none() so I think this is ok.
> 
> I think it would be better if this check was moved below so the migration fails
> early. Ie:
> 
> 		if (pte_none(pte)) {
>  			if (vma_is_anonymous(vma) && !is_swap_special_pte(pte)) {

Hmm.. but shouldn't vma_is_anonymous()==true already means it must not be a
swap special pte?  Because swap special pte only exists when !vma_is_anonymous().

> 
> Also how does this work for page migration in general? I can see in
> page_vma_mapped_walk() that we skip special pte's, but doesn't this mean we
> loose the special pte in that instance? Or is that ok for some reason?

Do you mean try_to_migrate_one()? Does it need to be aware of that?  Per my
understanding that's only for anonymous private memory, while in that world
there should have no swap special pte (page_lock_anon_vma_read will return NULL
early for !vma_is_anonymous).

Thanks,

-- 
Peter Xu

Powered by blists - more mailing lists