lists.openwall.net   lists  /  announce  owl-users  owl-dev  john-users  john-dev  passwdqc-users  yescrypt  popa3d-users  /  oss-security  kernel-hardening  musl  sabotage  tlsify  passwords  /  crypt-dev  xvendor  /  Bugtraq  Full-Disclosure  linux-kernel  linux-netdev  linux-ext4  linux-hardening  linux-cve-announce  PHC 
Open Source and information security mailing list archives
 
Hash Suite: Windows password security audit tool. GUI, reports in PDF.
[<prev] [next>] [<thread-prev] [day] [month] [year] [list]
Message-ID: <20210717185027.7c9ebf1d@jic23-huawei>
Date:   Sat, 17 Jul 2021 18:50:27 +0100
From:   Jonathan Cameron <jic23@...nel.org>
To:     Alexandru Ardelean <aardelean@...iqon.com>
Cc:     linux-iio@...r.kernel.org, linux-kernel@...r.kernel.org,
        Peter Meerwald-Stadler <pmeerw@...erw.net>
Subject: Re: [PATCH 1/2] iio: proximity: rfd77402: use i2c_client for
 rfd77402_{init,powerdown}()

On Sat, 3 Jul 2021 18:05:09 +0100
Jonathan Cameron <jic23@...nel.org> wrote:

> On Wed, 30 Jun 2021 16:16:35 +0300
> Alexandru Ardelean <aardelean@...iqon.com> wrote:
> 
> > These 2 functions only do I2C reads/writes and don't require any of the
> > private data of the driver.
> > 
> > They're also used in the PM suspend/resume part of the driver.
> > 
> > Converting them to take an i2c_client object as parameter simplifies things
> > a bit (especially in the suspend/resume) as the driver mostly needs the
> > reference for i2c_client, so no need to jump through hoops to get it from
> > the private data (as was done in many places).
> > 
> > The rfd77402_measure() function has also been converted to take an
> > i2c_client object, since it also does only I2C ops.  
> Not sure I'd have bothered with this function, but it doesn't hurt
> and is perhaps more consistent than leaving it alone..
> > 
> > Signed-off-by: Alexandru Ardelean <aardelean@...iqon.com>  
> +CC Peter
> 
> I'm fine with this change, but it should sit on the list a little longer
> (not to mention I'm not taking anything today anyway as mid merge window!)
Enough time I think.

Series applied,

Thanks,

Jonathan

> 
> Jonathan
> 
> 
> > ---
> >  drivers/iio/proximity/rfd77402.c | 60 ++++++++++++++------------------
> >  1 file changed, 27 insertions(+), 33 deletions(-)
> > 
> > diff --git a/drivers/iio/proximity/rfd77402.c b/drivers/iio/proximity/rfd77402.c
> > index 7a0472323f17..f349526421f3 100644
> > --- a/drivers/iio/proximity/rfd77402.c
> > +++ b/drivers/iio/proximity/rfd77402.c
> > @@ -90,18 +90,18 @@ static const struct iio_chan_spec rfd77402_channels[] = {
> >  	},
> >  };
> >  
> > -static int rfd77402_set_state(struct rfd77402_data *data, u8 state, u16 check)
> > +static int rfd77402_set_state(struct i2c_client *client, u8 state, u16 check)
> >  {
> >  	int ret;
> >  
> > -	ret = i2c_smbus_write_byte_data(data->client, RFD77402_CMD_R,
> > +	ret = i2c_smbus_write_byte_data(client, RFD77402_CMD_R,
> >  					state | RFD77402_CMD_VALID);
> >  	if (ret < 0)
> >  		return ret;
> >  
> >  	usleep_range(10000, 20000);
> >  
> > -	ret = i2c_smbus_read_word_data(data->client, RFD77402_STATUS_R);
> > +	ret = i2c_smbus_read_word_data(client, RFD77402_STATUS_R);
> >  	if (ret < 0)
> >  		return ret;
> >  	if ((ret & RFD77402_STATUS_PM_MASK) != check)
> > @@ -110,24 +110,24 @@ static int rfd77402_set_state(struct rfd77402_data *data, u8 state, u16 check)
> >  	return 0;
> >  }
> >  
> > -static int rfd77402_measure(struct rfd77402_data *data)
> > +static int rfd77402_measure(struct i2c_client *client)
> >  {
> >  	int ret;
> >  	int tries = 10;
> >  
> > -	ret = rfd77402_set_state(data, RFD77402_CMD_MCPU_ON,
> > +	ret = rfd77402_set_state(client, RFD77402_CMD_MCPU_ON,
> >  				 RFD77402_STATUS_MCPU_ON);
> >  	if (ret < 0)
> >  		return ret;
> >  
> > -	ret = i2c_smbus_write_byte_data(data->client, RFD77402_CMD_R,
> > +	ret = i2c_smbus_write_byte_data(client, RFD77402_CMD_R,
> >  					RFD77402_CMD_SINGLE |
> >  					RFD77402_CMD_VALID);
> >  	if (ret < 0)
> >  		goto err;
> >  
> >  	while (tries-- > 0) {
> > -		ret = i2c_smbus_read_byte_data(data->client, RFD77402_ICSR);
> > +		ret = i2c_smbus_read_byte_data(client, RFD77402_ICSR);
> >  		if (ret < 0)
> >  			goto err;
> >  		if (ret & RFD77402_ICSR_RESULT)
> > @@ -140,7 +140,7 @@ static int rfd77402_measure(struct rfd77402_data *data)
> >  		goto err;
> >  	}
> >  
> > -	ret = i2c_smbus_read_word_data(data->client, RFD77402_RESULT_R);
> > +	ret = i2c_smbus_read_word_data(client, RFD77402_RESULT_R);
> >  	if (ret < 0)
> >  		goto err;
> >  
> > @@ -153,7 +153,7 @@ static int rfd77402_measure(struct rfd77402_data *data)
> >  	return (ret & RFD77402_RESULT_DIST_MASK) >> 2;
> >  
> >  err:
> > -	rfd77402_set_state(data, RFD77402_CMD_MCPU_OFF,
> > +	rfd77402_set_state(client, RFD77402_CMD_MCPU_OFF,
> >  			   RFD77402_STATUS_MCPU_OFF);
> >  	return ret;
> >  }
> > @@ -168,7 +168,7 @@ static int rfd77402_read_raw(struct iio_dev *indio_dev,
> >  	switch (mask) {
> >  	case IIO_CHAN_INFO_RAW:
> >  		mutex_lock(&data->lock);
> > -		ret = rfd77402_measure(data);
> > +		ret = rfd77402_measure(data->client);
> >  		mutex_unlock(&data->lock);
> >  		if (ret < 0)
> >  			return ret;
> > @@ -188,23 +188,23 @@ static const struct iio_info rfd77402_info = {
> >  	.read_raw = rfd77402_read_raw,
> >  };
> >  
> > -static int rfd77402_init(struct rfd77402_data *data)
> > +static int rfd77402_init(struct i2c_client *client)
> >  {
> >  	int ret, i;
> >  
> > -	ret = rfd77402_set_state(data, RFD77402_CMD_STANDBY,
> > +	ret = rfd77402_set_state(client, RFD77402_CMD_STANDBY,
> >  				 RFD77402_STATUS_STANDBY);
> >  	if (ret < 0)
> >  		return ret;
> >  
> >  	/* configure INT pad as push-pull, active low */
> > -	ret = i2c_smbus_write_byte_data(data->client, RFD77402_ICSR,
> > +	ret = i2c_smbus_write_byte_data(client, RFD77402_ICSR,
> >  					RFD77402_ICSR_INT_MODE);
> >  	if (ret < 0)
> >  		return ret;
> >  
> >  	/* I2C configuration */
> > -	ret = i2c_smbus_write_word_data(data->client, RFD77402_I2C_INIT_CFG,
> > +	ret = i2c_smbus_write_word_data(client, RFD77402_I2C_INIT_CFG,
> >  					RFD77402_I2C_ADDR_INCR |
> >  					RFD77402_I2C_DATA_INCR |
> >  					RFD77402_I2C_HOST_DEBUG	|
> > @@ -213,42 +213,42 @@ static int rfd77402_init(struct rfd77402_data *data)
> >  		return ret;
> >  
> >  	/* set initialization */
> > -	ret = i2c_smbus_write_word_data(data->client, RFD77402_PMU_CFG, 0x0500);
> > +	ret = i2c_smbus_write_word_data(client, RFD77402_PMU_CFG, 0x0500);
> >  	if (ret < 0)
> >  		return ret;
> >  
> > -	ret = rfd77402_set_state(data, RFD77402_CMD_MCPU_OFF,
> > +	ret = rfd77402_set_state(client, RFD77402_CMD_MCPU_OFF,
> >  				 RFD77402_STATUS_MCPU_OFF);
> >  	if (ret < 0)
> >  		return ret;
> >  
> >  	/* set initialization */
> > -	ret = i2c_smbus_write_word_data(data->client, RFD77402_PMU_CFG, 0x0600);
> > +	ret = i2c_smbus_write_word_data(client, RFD77402_PMU_CFG, 0x0600);
> >  	if (ret < 0)
> >  		return ret;
> >  
> > -	ret = rfd77402_set_state(data, RFD77402_CMD_MCPU_ON,
> > +	ret = rfd77402_set_state(client, RFD77402_CMD_MCPU_ON,
> >  				 RFD77402_STATUS_MCPU_ON);
> >  	if (ret < 0)
> >  		return ret;
> >  
> >  	for (i = 0; i < ARRAY_SIZE(rf77402_tof_config); i++) {
> > -		ret = i2c_smbus_write_word_data(data->client,
> > +		ret = i2c_smbus_write_word_data(client,
> >  						rf77402_tof_config[i].reg,
> >  						rf77402_tof_config[i].val);
> >  		if (ret < 0)
> >  			return ret;
> >  	}
> >  
> > -	ret = rfd77402_set_state(data, RFD77402_CMD_STANDBY,
> > +	ret = rfd77402_set_state(client, RFD77402_CMD_STANDBY,
> >  				 RFD77402_STATUS_STANDBY);
> >  
> >  	return ret;
> >  }
> >  
> > -static int rfd77402_powerdown(struct rfd77402_data *data)
> > +static int rfd77402_powerdown(struct i2c_client *client)
> >  {
> > -	return rfd77402_set_state(data, RFD77402_CMD_STANDBY,
> > +	return rfd77402_set_state(client, RFD77402_CMD_STANDBY,
> >  				  RFD77402_STATUS_STANDBY);
> >  }
> >  
> > @@ -280,7 +280,7 @@ static int rfd77402_probe(struct i2c_client *client,
> >  	indio_dev->name = RFD77402_DRV_NAME;
> >  	indio_dev->modes = INDIO_DIRECT_MODE;
> >  
> > -	ret = rfd77402_init(data);
> > +	ret = rfd77402_init(client);
> >  	if (ret < 0)
> >  		return ret;
> >  
> > @@ -291,7 +291,7 @@ static int rfd77402_probe(struct i2c_client *client,
> >  	return 0;
> >  
> >  err_powerdown:
> > -	rfd77402_powerdown(data);
> > +	rfd77402_powerdown(client);
> >  	return ret;
> >  }
> >  
> > @@ -300,7 +300,7 @@ static int rfd77402_remove(struct i2c_client *client)
> >  	struct iio_dev *indio_dev = i2c_get_clientdata(client);
> >  
> >  	iio_device_unregister(indio_dev);
> > -	rfd77402_powerdown(iio_priv(indio_dev));
> > +	rfd77402_powerdown(client);
> >  
> >  	return 0;
> >  }
> > @@ -308,18 +308,12 @@ static int rfd77402_remove(struct i2c_client *client)
> >  #ifdef CONFIG_PM_SLEEP
> >  static int rfd77402_suspend(struct device *dev)
> >  {
> > -	struct rfd77402_data *data = iio_priv(i2c_get_clientdata(
> > -				     to_i2c_client(dev)));
> > -
> > -	return rfd77402_powerdown(data);
> > +	return rfd77402_powerdown(to_i2c_client(dev));
> >  }
> >  
> >  static int rfd77402_resume(struct device *dev)
> >  {
> > -	struct rfd77402_data *data = iio_priv(i2c_get_clientdata(
> > -				     to_i2c_client(dev)));
> > -
> > -	return rfd77402_init(data);
> > +	return rfd77402_init(to_i2c_client(dev));
> >  }
> >  #endif
> >    
> 

Powered by blists - more mailing lists

Powered by Openwall GNU/*/Linux Powered by OpenVZ