| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-Id: <20210718173610.894-10-martin@kaiser.cx>
Date: Sun, 18 Jul 2021 19:36:10 +0200
From: Martin Kaiser <martin@...ser.cx>
To: Larry Finger <Larry.Finger@...inger.net>,
Greg Kroah-Hartman <gregkh@...uxfoundation.org>
Cc: linux-staging@...ts.linux.dev, kernel-janitors@...r.kernel.org,
linux-kernel@...r.kernel.org, Martin Kaiser <martin@...ser.cx>
Subject: [PATCH 10/10] staging: rtl8188eu: remove cut_mask field from wl_pwr_cfg
We're no longer matching power transitions and commands against a
power cut version mask.
The cut_mask field from struct wl_pwr_cfg can be removed. It was set to
PWR_CUT_ALL_MSK for all remaining commands.
Signed-off-by: Martin Kaiser <martin@...ser.cx>
---
drivers/staging/rtl8188eu/include/pwrseq.h | 56 +++++++++----------
drivers/staging/rtl8188eu/include/pwrseqcmd.h | 1 -
2 files changed, 28 insertions(+), 29 deletions(-)
diff --git a/drivers/staging/rtl8188eu/include/pwrseq.h b/drivers/staging/rtl8188eu/include/pwrseq.h
index caa6bf71da77..5a7b4206d240 100644
--- a/drivers/staging/rtl8188eu/include/pwrseq.h
+++ b/drivers/staging/rtl8188eu/include/pwrseq.h
@@ -34,21 +34,21 @@
* },
* comment here
*/ \
- {0x0006, PWR_CUT_ALL_MSK, PWR_CMD_POLLING, BIT(1), BIT(1)}, \
+ {0x0006, PWR_CMD_POLLING, BIT(1), BIT(1)}, \
/* wait till 0x04[17] = 1 power ready*/ \
- {0x0002, PWR_CUT_ALL_MSK, PWR_CMD_WRITE, BIT(0) | BIT(1), 0}, \
+ {0x0002, PWR_CMD_WRITE, BIT(0) | BIT(1), 0}, \
/* 0x02[1:0] = 0 reset BB*/ \
- {0x0026, PWR_CUT_ALL_MSK, PWR_CMD_WRITE, BIT(7), BIT(7)}, \
+ {0x0026, PWR_CMD_WRITE, BIT(7), BIT(7)}, \
/*0x24[23] = 2b'01 schmit trigger */ \
- {0x0005, PWR_CUT_ALL_MSK, PWR_CMD_WRITE, BIT(7), 0}, \
+ {0x0005, PWR_CMD_WRITE, BIT(7), 0}, \
/* 0x04[15] = 0 disable HWPDN (control by DRV)*/ \
- {0x0005, PWR_CUT_ALL_MSK, PWR_CMD_WRITE, BIT(4) | BIT(3), 0}, \
+ {0x0005, PWR_CMD_WRITE, BIT(4) | BIT(3), 0}, \
/*0x04[12:11] = 2b'00 disable WL suspend*/ \
- {0x0005, PWR_CUT_ALL_MSK, PWR_CMD_WRITE, BIT(0), BIT(0)}, \
+ {0x0005, PWR_CMD_WRITE, BIT(0), BIT(0)}, \
/*0x04[8] = 1 polling until return 0*/ \
- {0x0005, PWR_CUT_ALL_MSK, PWR_CMD_POLLING, BIT(0), 0}, \
+ {0x0005, PWR_CMD_POLLING, BIT(0), 0}, \
/*wait till 0x04[8] = 0*/ \
- {0x0023, PWR_CUT_ALL_MSK, PWR_CMD_WRITE, BIT(4), 0}, \
+ {0x0023, PWR_CMD_WRITE, BIT(4), 0}, \
/*LDO normal mode*/
#define RTL8188E_TRANS_ACT_TO_CARDEMU \
@@ -57,13 +57,13 @@
* },
* comments here
*/ \
- {0x001F, PWR_CUT_ALL_MSK, PWR_CMD_WRITE, 0xFF, 0}, \
+ {0x001F, PWR_CMD_WRITE, 0xFF, 0}, \
/*0x1F[7:0] = 0 turn off RF*/ \
- {0x0023, PWR_CUT_ALL_MSK, PWR_CMD_WRITE, BIT(4), BIT(4)}, \
+ {0x0023, PWR_CMD_WRITE, BIT(4), BIT(4)}, \
/*LDO Sleep mode*/ \
- {0x0005, PWR_CUT_ALL_MSK, PWR_CMD_WRITE, BIT(1), BIT(1)}, \
+ {0x0005, PWR_CMD_WRITE, BIT(1), BIT(1)}, \
/*0x04[9] = 1 turn off MAC by HW state machine*/ \
- {0x0005, PWR_CUT_ALL_MSK, PWR_CMD_POLLING, BIT(1), 0}, \
+ {0x0005, PWR_CMD_POLLING, BIT(1), 0}, \
/*wait till 0x04[9] = 0 polling until return 0 to disable*/
#define RTL8188E_TRANS_CARDEMU_TO_CARDDIS \
@@ -72,15 +72,15 @@
* value },
* comments here
*/ \
- {0x0026, PWR_CUT_ALL_MSK, PWR_CMD_WRITE, BIT(7), BIT(7)}, \
+ {0x0026, PWR_CMD_WRITE, BIT(7), BIT(7)}, \
/*0x24[23] = 2b'01 schmit trigger */ \
- {0x0005, PWR_CUT_ALL_MSK, PWR_CMD_WRITE, BIT(3) | BIT(4), BIT(3)}, \
+ {0x0005, PWR_CMD_WRITE, BIT(3) | BIT(4), BIT(3)}, \
/*0x04[12:11] = 2b'01 enable WL suspend*/ \
- {0x0007, PWR_CUT_ALL_MSK, PWR_CMD_WRITE, 0xFF, 0}, \
+ {0x0007, PWR_CMD_WRITE, 0xFF, 0}, \
/* 0x04[31:30] = 2b'10 enable enable bandgap mbias in suspend */\
- {0x0041, PWR_CUT_ALL_MSK, PWR_CMD_WRITE, BIT(4), 0}, \
+ {0x0041, PWR_CMD_WRITE, BIT(4), 0}, \
/*Clear SIC_EN register 0x40[12] = 1'b0 */ \
- {0xfe10, PWR_CUT_ALL_MSK, PWR_CMD_WRITE, BIT(4), BIT(4)}, \
+ {0xfe10, PWR_CMD_WRITE, BIT(4), BIT(4)}, \
/*Set USB suspend enable local register 0xfe10[4]=1 */
/* This is used by driver for LPSRadioOff Procedure, not for FW LPS Step */
@@ -90,24 +90,24 @@
* value },
* comments here
*/ \
- {0x0522, PWR_CUT_ALL_MSK, PWR_CMD_WRITE, 0xFF, 0x7F},/*Tx Pause*/ \
- {0x05F8, PWR_CUT_ALL_MSK, PWR_CMD_POLLING, 0xFF, 0}, \
+ {0x0522, PWR_CMD_WRITE, 0xFF, 0x7F},/*Tx Pause*/ \
+ {0x05F8, PWR_CMD_POLLING, 0xFF, 0}, \
/*Should be zero if no packet is transmitting*/ \
- {0x05F9, PWR_CUT_ALL_MSK, PWR_CMD_POLLING, 0xFF, 0}, \
+ {0x05F9, PWR_CMD_POLLING, 0xFF, 0}, \
/*Should be zero if no packet is transmitting*/ \
- {0x05FA, PWR_CUT_ALL_MSK, PWR_CMD_POLLING, 0xFF, 0}, \
+ {0x05FA, PWR_CMD_POLLING, 0xFF, 0}, \
/*Should be zero if no packet is transmitting*/ \
- {0x05FB, PWR_CUT_ALL_MSK, PWR_CMD_POLLING, 0xFF, 0}, \
+ {0x05FB, PWR_CMD_POLLING, 0xFF, 0}, \
/*Should be zero if no packet is transmitting*/ \
- {0x0002, PWR_CUT_ALL_MSK, PWR_CMD_WRITE, BIT(0), 0}, \
+ {0x0002, PWR_CMD_WRITE, BIT(0), 0}, \
/*CCK and OFDM are disabled,and clock are gated*/ \
- {0x0002, PWR_CUT_ALL_MSK, PWR_CMD_DELAY, 0, PWRSEQ_DELAY_US}, \
+ {0x0002, PWR_CMD_DELAY, 0, PWRSEQ_DELAY_US}, \
/*Delay 1us*/ \
- {0x0100, PWR_CUT_ALL_MSK, PWR_CMD_WRITE, 0xFF, 0x3F}, \
+ {0x0100, PWR_CMD_WRITE, 0xFF, 0x3F}, \
/*Reset MAC TRX*/ \
- {0x0101, PWR_CUT_ALL_MSK, PWR_CMD_WRITE, BIT(1), 0}, \
+ {0x0101, PWR_CMD_WRITE, BIT(1), 0}, \
/*check if removed later*/\
- {0x0553, PWR_CUT_ALL_MSK, PWR_CMD_WRITE, BIT(5), BIT(5)}, \
+ {0x0553, PWR_CMD_WRITE, BIT(5), BIT(5)}, \
/*Respond TxOK to scheduler*/
#define RTL8188E_TRANS_END \
@@ -116,7 +116,7 @@
* value },
* comments here
*/ \
- {0xFFFF, PWR_CUT_ALL_MSK, PWR_CMD_END, 0, 0},
+ {0xFFFF, PWR_CMD_END, 0, 0},
extern struct wl_pwr_cfg rtl8188E_power_on_flow
[RTL8188E_TRANS_CARDEMU_TO_ACT_STEPS + RTL8188E_TRANS_END_STEPS];
diff --git a/drivers/staging/rtl8188eu/include/pwrseqcmd.h b/drivers/staging/rtl8188eu/include/pwrseqcmd.h
index a5eb95fc58b9..bfa0405cccde 100644
--- a/drivers/staging/rtl8188eu/include/pwrseqcmd.h
+++ b/drivers/staging/rtl8188eu/include/pwrseqcmd.h
@@ -33,7 +33,6 @@ enum pwrseq_cmd_delat_unit {
struct wl_pwr_cfg {
u16 offset;
- u8 cut_msk;
u8 cmd:4;
u8 msk;
u8 value;
--
2.20.1
Powered by blists - more mailing lists