| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-Id: <20210718043034.76431-4-zhengqi.arch@bytedance.com>
Date: Sun, 18 Jul 2021 12:30:29 +0800
From: Qi Zheng <zhengqi.arch@...edance.com>
To: akpm@...ux-foundation.org, tglx@...utronix.de, hannes@...xchg.org,
mhocko@...nel.org, vdavydov.dev@...il.com
Cc: linux-doc@...r.kernel.org, linux-kernel@...r.kernel.org,
linux-mm@...ck.org, songmuchun@...edance.com,
Qi Zheng <zhengqi.arch@...edance.com>
Subject: [PATCH 3/7] mm: remove redundant smp_wmb()
The smp_wmb() which is in the __pte_alloc() is used to
ensure all ptes setup is visible before the pte is made
visible to other CPUs by being put into page tables. We
only need this when the pte is actually populated, so
move it to pte_install(). __pte_alloc_kernel(),
__p4d_alloc(), __pud_alloc() and __pmd_alloc() are similar
to this case.
We can also defer smp_wmb() to the place where the pmd entry
is really populated by preallocated pte. There are two kinds
of user of preallocated pte, one is filemap & finish_fault(),
another is THP. The former does not need another smp_wmb()
because the smp_wmb() has been done by pte_install().
Fortunately, the latter also does not need another smp_wmb()
because there is already a smp_wmb() before populating the
new pte when the THP use preallocated pte to split huge pmd.
Signed-off-by: Qi Zheng <zhengqi.arch@...edance.com>
---
mm/memory.c | 47 ++++++++++++++++++++---------------------------
mm/sparse-vmemmap.c | 2 +-
2 files changed, 21 insertions(+), 28 deletions(-)
diff --git a/mm/memory.c b/mm/memory.c
index a0ac4b33e07a..540f0c9d0970 100644
--- a/mm/memory.c
+++ b/mm/memory.c
@@ -439,6 +439,20 @@ void pte_install(struct mm_struct *mm, pmd_t *pmd, pgtable_t *pte)
if (likely(pmd_none(*pmd))) { /* Has another populated it ? */
mm_inc_nr_ptes(mm);
+ /*
+ * Ensure all pte setup (eg. pte page lock and page clearing) are
+ * visible before the pte is made visible to other CPUs by being
+ * put into page tables.
+ *
+ * The other side of the story is the pointer chasing in the page
+ * table walking code (when walking the page table without locking;
+ * ie. most of the time). Fortunately, these data accesses consist
+ * of a chain of data-dependent loads, meaning most CPUs (alpha
+ * being the notable exception) will already guarantee loads are
+ * seen in-order. See the alpha page table accessors for the
+ * smp_rmb() barriers in page table walking code.
+ */
+ smp_wmb(); /* Could be smp_wmb__xxx(before|after)_spin_lock */
pmd_populate(mm, pmd, *pte);
*pte = NULL;
}
@@ -451,21 +465,6 @@ int __pte_alloc(struct mm_struct *mm, pmd_t *pmd)
if (!new)
return -ENOMEM;
- /*
- * Ensure all pte setup (eg. pte page lock and page clearing) are
- * visible before the pte is made visible to other CPUs by being
- * put into page tables.
- *
- * The other side of the story is the pointer chasing in the page
- * table walking code (when walking the page table without locking;
- * ie. most of the time). Fortunately, these data accesses consist
- * of a chain of data-dependent loads, meaning most CPUs (alpha
- * being the notable exception) will already guarantee loads are
- * seen in-order. See the alpha page table accessors for the
- * smp_rmb() barriers in page table walking code.
- */
- smp_wmb(); /* Could be smp_wmb__xxx(before|after)_spin_lock */
-
pte_install(mm, pmd, &new);
if (new)
pte_free(mm, new);
@@ -478,10 +477,9 @@ int __pte_alloc_kernel(pmd_t *pmd)
if (!new)
return -ENOMEM;
- smp_wmb(); /* See comment in __pte_alloc */
-
spin_lock(&init_mm.page_table_lock);
if (likely(pmd_none(*pmd))) { /* Has another populated it ? */
+ smp_wmb(); /* See comment in pte_install() */
pmd_populate_kernel(&init_mm, pmd, new);
new = NULL;
}
@@ -3856,7 +3854,6 @@ static vm_fault_t __do_fault(struct vm_fault *vmf)
vmf->prealloc_pte = pte_alloc_one(vma->vm_mm);
if (!vmf->prealloc_pte)
return VM_FAULT_OOM;
- smp_wmb(); /* See comment in __pte_alloc() */
}
ret = vma->vm_ops->fault(vmf);
@@ -3918,7 +3915,6 @@ vm_fault_t do_set_pmd(struct vm_fault *vmf, struct page *page)
vmf->prealloc_pte = pte_alloc_one(vma->vm_mm);
if (!vmf->prealloc_pte)
return VM_FAULT_OOM;
- smp_wmb(); /* See comment in __pte_alloc() */
}
vmf->ptl = pmd_lock(vma->vm_mm, vmf->pmd);
@@ -4143,7 +4139,6 @@ static vm_fault_t do_fault_around(struct vm_fault *vmf)
vmf->prealloc_pte = pte_alloc_one(vmf->vma->vm_mm);
if (!vmf->prealloc_pte)
return VM_FAULT_OOM;
- smp_wmb(); /* See comment in __pte_alloc() */
}
return vmf->vma->vm_ops->map_pages(vmf, start_pgoff, end_pgoff);
@@ -4817,13 +4812,13 @@ int __p4d_alloc(struct mm_struct *mm, pgd_t *pgd, unsigned long address)
if (!new)
return -ENOMEM;
- smp_wmb(); /* See comment in __pte_alloc */
-
spin_lock(&mm->page_table_lock);
if (pgd_present(*pgd)) /* Another has populated it */
p4d_free(mm, new);
- else
+ else {
+ smp_wmb(); /* See comment in pte_install() */
pgd_populate(mm, pgd, new);
+ }
spin_unlock(&mm->page_table_lock);
return 0;
}
@@ -4840,11 +4835,10 @@ int __pud_alloc(struct mm_struct *mm, p4d_t *p4d, unsigned long address)
if (!new)
return -ENOMEM;
- smp_wmb(); /* See comment in __pte_alloc */
-
spin_lock(&mm->page_table_lock);
if (!p4d_present(*p4d)) {
mm_inc_nr_puds(mm);
+ smp_wmb(); /* See comment in pte_install() */
p4d_populate(mm, p4d, new);
} else /* Another has populated it */
pud_free(mm, new);
@@ -4865,11 +4859,10 @@ int __pmd_alloc(struct mm_struct *mm, pud_t *pud, unsigned long address)
if (!new)
return -ENOMEM;
- smp_wmb(); /* See comment in __pte_alloc */
-
ptl = pud_lock(mm, pud);
if (!pud_present(*pud)) {
mm_inc_nr_pmds(mm);
+ smp_wmb(); /* See comment in pte_install() */
pud_populate(mm, pud, new);
} else /* Another has populated it */
pmd_free(mm, new);
diff --git a/mm/sparse-vmemmap.c b/mm/sparse-vmemmap.c
index bdce883f9286..15075d8875be 100644
--- a/mm/sparse-vmemmap.c
+++ b/mm/sparse-vmemmap.c
@@ -76,7 +76,7 @@ static int split_vmemmap_huge_pmd(pmd_t *pmd, unsigned long start,
set_pte_at(&init_mm, addr, pte, entry);
}
- /* Make pte visible before pmd. See comment in __pte_alloc(). */
+ /* Make pte visible before pmd. See comment in pte_install(). */
smp_wmb();
pmd_populate_kernel(&init_mm, pmd, pgtable);
--
2.11.0
Powered by blists - more mailing lists