[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-Id: <20210719144948.948045046@linuxfoundation.org>
Date: Mon, 19 Jul 2021 16:51:13 +0200
From: Greg Kroah-Hartman <gregkh@...uxfoundation.org>
To: linux-kernel@...r.kernel.org
Cc: Greg Kroah-Hartman <gregkh@...uxfoundation.org>,
stable@...r.kernel.org, Carl Philipp Klemm <philipp@...s.xyz>,
Tony Lindgren <tony@...mide.com>,
Kalle Valo <kvalo@...eaurora.org>,
Sasha Levin <sashal@...nel.org>
Subject: [PATCH 4.14 184/315] wlcore/wl12xx: Fix wl12xx get_mac error if device is in ELP
From: Tony Lindgren <tony@...mide.com>
[ Upstream commit 11ef6bc846dcdce838f0b00c5f6a562c57e5d43b ]
At least on wl12xx, reading the MAC after boot can fail with a warning
at drivers/net/wireless/ti/wlcore/sdio.c:78 wl12xx_sdio_raw_read.
The failed call comes from wl12xx_get_mac() that wlcore_nvs_cb() calls
after request_firmware_work_func().
After the error, no wireless interface is created. Reloading the wl12xx
module makes the interface work.
Turns out the wlan controller can be in a low-power ELP state after the
boot from the bootloader or kexec, and needs to be woken up first.
Let's wake the hardware and add a sleep after that similar to
wl12xx_pre_boot() is already doing.
Note that a similar issue could exist for wl18xx, but I have not seen it
so far. And a search for wl18xx_get_mac and wl12xx_sdio_raw_read did not
produce similar errors.
Cc: Carl Philipp Klemm <philipp@...s.xyz>
Signed-off-by: Tony Lindgren <tony@...mide.com>
Signed-off-by: Kalle Valo <kvalo@...eaurora.org>
Link: https://lore.kernel.org/r/20210603062814.19464-1-tony@atomide.com
Signed-off-by: Sasha Levin <sashal@...nel.org>
---
drivers/net/wireless/ti/wl12xx/main.c | 7 +++++++
1 file changed, 7 insertions(+)
diff --git a/drivers/net/wireless/ti/wl12xx/main.c b/drivers/net/wireless/ti/wl12xx/main.c
index 9bd635ec7827..72991d3a55f1 100644
--- a/drivers/net/wireless/ti/wl12xx/main.c
+++ b/drivers/net/wireless/ti/wl12xx/main.c
@@ -1516,6 +1516,13 @@ static int wl12xx_get_fuse_mac(struct wl1271 *wl)
u32 mac1, mac2;
int ret;
+ /* Device may be in ELP from the bootloader or kexec */
+ ret = wlcore_write32(wl, WL12XX_WELP_ARM_COMMAND, WELP_ARM_COMMAND_VAL);
+ if (ret < 0)
+ goto out;
+
+ usleep_range(500000, 700000);
+
ret = wlcore_set_partition(wl, &wl->ptable[PART_DRPW]);
if (ret < 0)
goto out;
--
2.30.2
Powered by blists - more mailing lists