| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <CAMj1kXEBbjOOaAjq8SwSM=mxZWyFJ_VwhXF62TfF1T-tA=_2CQ@mail.gmail.com>
Date: Mon, 19 Jul 2021 09:51:11 +0200
From: Ard Biesheuvel <ardb@...nel.org>
To: Shaobo Huang <huangshaobo6@...wei.com>
Cc: andreyknvl@...il.com, chenzefeng2@...wei.com,
Dmitry Vyukov <dvyukov@...gle.com>,
Florian Fainelli <f.fainelli@...il.com>,
Alexander Potapenko <glider@...gle.com>,
kasan-dev <kasan-dev@...glegroups.com>,
kepler.chenxin@...wei.com,
Linux ARM <linux-arm-kernel@...ts.infradead.org>,
Linux Kernel Mailing List <linux-kernel@...r.kernel.org>,
Russell King <linux@...linux.org.uk>, liucheng32@...wei.com,
Abbott Liu <liuwenliang@...wei.com>, nico@...vell.com,
Xiaoming Ni <nixiaoming@...wei.com>, qbarnes@...il.com,
Andrey Ryabinin <ryabinin.a.a@...il.com>,
sagar.abhishek@...il.com, wuquanming@...wei.com,
xiaoqian9@...wei.com, young.liuyang@...wei.com,
zengweilin@...wei.com
Subject: Re: [PATCH] ARM: fix panic when kasan and kprobe are enabled
On Mon, 19 Jul 2021 at 09:45, Shaobo Huang <huangshaobo6@...wei.com> wrote:
>
> On Mon, 19 Jul 2021 at 07:06, Ard Biesheuvel <ardb@...nel.org> wrote:
> > On Mon, 19 Jul 2021 at 05:09, Shaobo Huang <huangshaobo6@...wei.com> wrote:
> > >
> > > On Sat, 17 Jul 2021 at 01:01, Ard Biesheuvel <ardb@...nel.org> wrote:
> > > > On Wed, 14 Jul 2021 at 10:27, Shaobo Huang <huangshaobo6@...wei.com> wrote:
> > > >>
> > > >> From: huangshaobo <huangshaobo6@...wei.com>
> > > >>
> > > >> arm32 uses software to simulate the instruction replaced
> > > >> by kprobe. some instructions may be simulated by constructing
> > > >> assembly functions. therefore, before executing instruction
> > > >> simulation, it is necessary to construct assembly function
> > > >> execution environment in C language through binding registers.
> > > >> after kasan is enabled, the register binding relationship will
> > > >> be destroyed, resulting in instruction simulation errors and
> > > >> causing kernel panic.
> > > >>
> > > >> the kprobe emulate instruction function is distributed in three
> > > >> files: actions-common.c actions-arm.c actions-thumb.c, so disable
> > > >> KASAN when compiling these files.
> > > >>
> > > >> for example, use kprobe insert on cap_capable+20 after kasan
> > > >> enabled, the cap_capable assembly code is as follows:
> > > >> <cap_capable>:
> > > >> e92d47f0 push {r4, r5, r6, r7, r8, r9, sl, lr}
> > > >> e1a05000 mov r5, r0
> > > >> e280006c add r0, r0, #108 ; 0x6c
> > > >> e1a04001 mov r4, r1
> > > >> e1a06002 mov r6, r2
> > > >> e59fa090 ldr sl, [pc, #144] ;
> > > >> ebfc7bf8 bl c03aa4b4 <__asan_load4>
> > > >> e595706c ldr r7, [r5, #108] ; 0x6c
> > > >> e2859014 add r9, r5, #20
> > > >> ......
> > > >> The emulate_ldr assembly code after enabling kasan is as follows:
> > > >> c06f1384 <emulate_ldr>:
> > > >> e92d47f0 push {r4, r5, r6, r7, r8, r9, sl, lr}
> > > >> e282803c add r8, r2, #60 ; 0x3c
> > > >> e1a05000 mov r5, r0
> > > >> e7e37855 ubfx r7, r5, #16, #4
> > > >> e1a00008 mov r0, r8
> > > >> e1a09001 mov r9, r1
> > > >> e1a04002 mov r4, r2
> > > >> ebf35462 bl c03c6530 <__asan_load4>
> > > >> e357000f cmp r7, #15
> > > >> e7e36655 ubfx r6, r5, #12, #4
> > > >> e205a00f and sl, r5, #15
> > > >> 0a000001 beq c06f13bc <emulate_ldr+0x38>
> > > >> e0840107 add r0, r4, r7, lsl #2
> > > >> ebf3545c bl c03c6530 <__asan_load4>
> > > >> e084010a add r0, r4, sl, lsl #2
> > > >> ebf3545a bl c03c6530 <__asan_load4>
> > > >> e2890010 add r0, r9, #16
> > > >> ebf35458 bl c03c6530 <__asan_load4>
> > > >> e5990010 ldr r0, [r9, #16]
> > > >> e12fff30 blx r0
> > > >> e356000f cm r6, #15
> > > >> 1a000014 bne c06f1430 <emulate_ldr+0xac>
> > > >> e1a06000 mov r6, r0
> > > >> e2840040 add r0, r4, #64 ; 0x40
> > > >> ......
> > > >>
> > > >> when running in emulate_ldr to simulate the ldr instruction, panic
> > > >> occurred, and the log is as follows:
> > > >> Unable to handle kernel NULL pointer dereference at virtual address
> > > >> 00000090
> > > >> pgd = ecb46400
> > > >> [00000090] *pgd=2e0fa003, *pmd=00000000
> > > >> Internal error: Oops: 206 [#1] SMP ARM
> > > >> PC is at cap_capable+0x14/0xb0
> > > >> LR is at emulate_ldr+0x50/0xc0
> > > >> psr: 600d0293 sp : ecd63af8 ip : 00000004 fp : c0a7c30c
> > > >> r10: 00000000 r9 : c30897f4 r8 : ecd63cd4
> > > >> r7 : 0000000f r6 : 0000000a r5 : e59fa090 r4 : ecd63c98
> > > >> r3 : c06ae294 r2 : 00000000 r1 : b7611300 r0 : bf4ec008
> > > >> Flags: nZCv IRQs off FIQs on Mode SVC_32 ISA ARM Segment user
> > > >> Control: 32c5387d Table: 2d546400 DAC: 55555555
> > > >> Process bash (pid: 1643, stack limit = 0xecd60190)
> > > >> (cap_capable) from (kprobe_handler+0x218/0x340)
> > > >> (kprobe_handler) from (kprobe_trap_handler+0x24/0x48)
> > > >> (kprobe_trap_handler) from (do_undefinstr+0x13c/0x364)
> > > >> (do_undefinstr) from (__und_svc_finish+0x0/0x30)
> > > >> (__und_svc_finish) from (cap_capable+0x18/0xb0)
> > > >> (cap_capable) from (cap_vm_enough_memory+0x38/0x48)
> > > >> (cap_vm_enough_memory) from
> > > >> (security_vm_enough_memory_mm+0x48/0x6c)
> > > >> (security_vm_enough_memory_mm) from
> > > >> (copy_process.constprop.5+0x16b4/0x25c8)
> > > >> (copy_process.constprop.5) from (_do_fork+0xe8/0x55c)
> > > >> (_do_fork) from (SyS_clone+0x1c/0x24)
> > > >> (SyS_clone) from (__sys_trace_return+0x0/0x10)
> > > >> Code: 0050a0e1 6c0080e2 0140a0e1 0260a0e1 (f801f0e7)
> > > >>
> > > >> Fixes: 35aa1df43283 ("ARM kprobes: instruction single-stepping support")
> > > >> Fixes: 421015713b30 ("ARM: 9017/2: Enable KASan for ARM")
> > > >> Signed-off-by: huangshaobo <huangshaobo6@...wei.com>
> > > >> Asked-by: Ard Biesheuvel <ardb@...nel.org>
> > > >
> > > > Please don't do this - the maintainer will pick it up when applying,
> > > > or when you send a new version of the patch, it is OK to add these
> > > > tags if you have not made any substantial changes.
> > > >
> > > > But please do *not* add tags like this on someone else's behalf by
> > > > replying to the email - and I should also point out that 'asked-by' is
> > > > bogus.
> > > >
> > >
> > > Hi ardb,
> > > 1.The original patch you have been asked-by by email before, link: https://lore.kernel.org/linux-arm-kernel/CAMj1kXGqfF68MT4WwrxS0cYiUBb0gODDh-wGZSQcW9vxdfK90A@mail.gmail.com/
> >
> > No it was not.
> >
> > It was ACKed by, not ASKed by.
> >
> > > 2.In addition to adding the asked-by tag, there is no other content modification in this patch
> > > 3.The patch was reissued because the previous recipient did not include kasan maintainer and reviewers
> > >
> >
> > I don't care. Do NOT reply to emails with tags in other people's names.
> >
> Hi ardb,
> Sincerely apologize for my mistake,
> I mistakenly wrote the Acked-by label as Asked-by.
> Do I need to change to Acked-by or remove the label and reissue a patch?
>
You can put this patch into rmk's patch tracker at armlinux.org.uk. In
this case, it is ok to include the tags that were given in reply, ie.,
my acked-by
--
Ard.
> >
> > > thanks,
> > > ShaoBo Huang
> > >
> > > >
> > > >> ---
> > > >> arch/arm/probes/kprobes/Makefile | 3 +++
> > > >> 1 file changed, 3 insertions(+)
> > > >>
> > > >> diff --git a/arch/arm/probes/kprobes/Makefile b/arch/arm/probes/kprobes/Makefile
> > > >> index 14db56f49f0a..6159010dac4a 100644
> > > >> --- a/arch/arm/probes/kprobes/Makefile
> > > >> +++ b/arch/arm/probes/kprobes/Makefile
> > > >> @@ -1,4 +1,7 @@
> > > >> # SPDX-License-Identifier: GPL-2.0
> > > >> +KASAN_SANITIZE_actions-common.o := n
> > > >> +KASAN_SANITIZE_actions-arm.o := n
> > > >> +KASAN_SANITIZE_actions-thumb.o := n
> > > >> obj-$(CONFIG_KPROBES) += core.o actions-common.o checkers-common.o
> > > >> obj-$(CONFIG_ARM_KPROBES_TEST) += test-kprobes.o
> > > >> test-kprobes-objs := test-core.o
> > > >> --
> > > >> 2.12.3
> > > >>
Powered by blists - more mailing lists