[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-Id: <20210719144951.574606590@linuxfoundation.org>
Date: Mon, 19 Jul 2021 16:55:25 +0200
From: Greg Kroah-Hartman <gregkh@...uxfoundation.org>
To: linux-kernel@...r.kernel.org
Cc: Greg Kroah-Hartman <gregkh@...uxfoundation.org>,
stable@...r.kernel.org, Icenowy Zheng <icenowy@...c.io>,
Maxime Ripard <maxime@...no.tech>,
Sasha Levin <sashal@...nel.org>
Subject: [PATCH 5.12 263/292] arm64: dts: allwinner: a64-sopine-baseboard: change RGMII mode to TXID
From: Icenowy Zheng <icenowy@...c.io>
[ Upstream commit bd5431b2f9b30a70f6ed964dd5ee9a6d1c397c06 ]
Although the schematics of Pine A64-LTS and SoPine Baseboard shows both
the RX and TX internal delay are enabled, they're using the same broken
RTL8211E chip batch with Pine A64+, so they should use TXID instead, not
ID.
In addition, by checking the real components soldered on both a SoPine
Baseboard and a Pine A64-LTS, RX delay is not enabled (GR69 soldered and
GR70 NC) despite the schematics says it's enabled. It's a common
situation for Pine64 boards that the NC information on schematics is not
the same with the board.
So the RGMII delay mode should be TXID on these boards.
Fixes: c2b111e59a7b ("arm64: dts: allwinner: A64 Sopine: phy-mode rgmii-id")
Signed-off-by: Icenowy Zheng <icenowy@...c.io>
Signed-off-by: Maxime Ripard <maxime@...no.tech>
Link: https://lore.kernel.org/r/20210609083843.463750-1-icenowy@aosc.io
Signed-off-by: Sasha Levin <sashal@...nel.org>
---
arch/arm64/boot/dts/allwinner/sun50i-a64-sopine-baseboard.dts | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/arch/arm64/boot/dts/allwinner/sun50i-a64-sopine-baseboard.dts b/arch/arm64/boot/dts/allwinner/sun50i-a64-sopine-baseboard.dts
index e22b94c83647..5e66ce1a334f 100644
--- a/arch/arm64/boot/dts/allwinner/sun50i-a64-sopine-baseboard.dts
+++ b/arch/arm64/boot/dts/allwinner/sun50i-a64-sopine-baseboard.dts
@@ -79,7 +79,7 @@
&emac {
pinctrl-names = "default";
pinctrl-0 = <&rgmii_pins>;
- phy-mode = "rgmii-id";
+ phy-mode = "rgmii-txid";
phy-handle = <&ext_rgmii_phy>;
phy-supply = <®_dc1sw>;
status = "okay";
--
2.30.2
Powered by blists - more mailing lists