| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-Id: <cover.1626768323.git.mchehab+huawei@kernel.org>
Date: Tue, 20 Jul 2021 10:09:02 +0200
From: Mauro Carvalho Chehab <mchehab+huawei@...nel.org>
To: Bjorn Helgaas <helgaas@...nel.org>, Rob Herring <robh@...nel.org>
Cc: linuxarm@...wei.com, mauro.chehab@...wei.com,
Mauro Carvalho Chehab <mchehab+huawei@...nel.org>,
Krzysztof Wilczyński <kw@...ux.com>,
Binghui Wang <wangbinghui@...ilicon.com>,
Gustavo Pimentel <gustavo.pimentel@...opsys.com>,
Jingoo Han <jingoohan1@...il.com>,
Rob Herring <robh+dt@...nel.org>,
Xiaowei Song <songxiaowei@...ilicon.com>,
devicetree@...r.kernel.org, linux-arm-kernel@...ts.infradead.org,
linux-kernel@...r.kernel.org, linux-pci@...r.kernel.org,
linux-phy@...ts.infradead.org,
Greg Kroah-Hartman <gregkh@...uxfoundation.org>
Subject: [PATCH v6 0/9] Add support for Hikey 970 PCIe
This series depends on this one:
https://lore.kernel.org/lkml/cover.1626515862.git.mchehab+huawei@kernel.org/
It is available, with its patch dependencies against v5.14-rc1 at:
https://github.com/mchehab/linux/commits/pcie-alternate
This series add support at the pcie-kirin dirver for it to use a separate PHY driver.
Yet, in order to preserve the existing DT schema for Kirin 960, it keeps the
Kirin 960 PHY inside the pci driver. I tried to find a way to split it while keeping
the DT schema backward-compatible, but currently the PHY core doesn't allow
that, as it relies on a "phy" property at the pcie node in order to recognize the
PHY driver.
Once the pci-kiring is modified to support an external PHY driver, add a
Kirin 970 PHY and add the needed properties for the HiKey 970 board to
detect the PCIe.
It should be noticed that the HiKey 970 design uses 4 different GPIO pins, one
for each PERST# signal for each PCIe bus device:
- GPIO 56 has a pullup logic from 1V8 to 2V5
connected to a PCIe bridge chip (PEX 8606);
- GPIO 25 has a pullup logic from 1V8 to 3V3
connected to the PERST# pin at the M.2 slot;
- GPIO 220 has a pullup logic from 1V8 to 3V3
connected to the PERST# pin at the PCIe mini slot;
- GPIO 203 has a pullup logic from 1V8 to 3V3
connected to the PERST# pin at the Ethernet chipset.
At the first versions, those were mapped as part of the pci-bus, but the
pci-bus.yaml schema only allows a single PERST# GPIO. So, on v5, those
were moved to the PHY DT schema. However, as Rob complained, on this
version, I opted to add a separate patch (the last one) that moves those
back to the PCIe of-node.
If such patch 09/09 is accepted, then this patch for the DT schema should
also be accepted:
https://github.com/devicetree-org/dt-schema/pull/56
Tested on Hikey970:
$ lspci
00:00.0 PCI bridge: Huawei Technologies Co., Ltd. Device 3670 (rev 01)
01:00.0 PCI bridge: PLX Technology, Inc. PEX 8606 6 Lane, 6 Port PCI Express Gen 2 (5.0 GT/s) Switch (rev ba)
02:01.0 PCI bridge: PLX Technology, Inc. PEX 8606 6 Lane, 6 Port PCI Express Gen 2 (5.0 GT/s) Switch (rev ba)
02:04.0 PCI bridge: PLX Technology, Inc. PEX 8606 6 Lane, 6 Port PCI Express Gen 2 (5.0 GT/s) Switch (rev ba)
02:05.0 PCI bridge: PLX Technology, Inc. PEX 8606 6 Lane, 6 Port PCI Express Gen 2 (5.0 GT/s) Switch (rev ba)
02:07.0 PCI bridge: PLX Technology, Inc. PEX 8606 6 Lane, 6 Port PCI Express Gen 2 (5.0 GT/s) Switch (rev ba)
02:09.0 PCI bridge: PLX Technology, Inc. PEX 8606 6 Lane, 6 Port PCI Express Gen 2 (5.0 GT/s) Switch (rev ba)
06:00.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL8111/8168/8411 PCI Express Gigabit Ethernet Controller (rev 07)
$ ethtool enp6s0
Settings for enp6s0:
Supported ports: [ TP MII ]
Supported link modes: 10baseT/Half 10baseT/Full
100baseT/Half 100baseT/Full
1000baseT/Half 1000baseT/Full
Supported pause frame use: Symmetric Receive-only
Supports auto-negotiation: Yes
Supported FEC modes: Not reported
Advertised link modes: 10baseT/Half 10baseT/Full
100baseT/Half 100baseT/Full
1000baseT/Half 1000baseT/Full
Advertised pause frame use: Symmetric Receive-only
Advertised auto-negotiation: Yes
Advertised FEC modes: Not reported
Link partner advertised link modes: 10baseT/Half 10baseT/Full
100baseT/Half 100baseT/Full
Link partner advertised pause frame use: Symmetric Receive-only
Link partner advertised auto-negotiation: Yes
Link partner advertised FEC modes: Not reported
Speed: 100Mb/s
Duplex: Full
Auto-negotiation: on
master-slave cfg: preferred slave
master-slave status: slave
Port: Twisted Pair
PHYAD: 0
Transceiver: external
MDI-X: Unknown
netlink error: Operation not permitted
Link detected: yes
Also tested that Hikey 960 keeps being supported:
$ lspci
00:00.0 PCI bridge: Huawei Technologies Co., Ltd. Device 3660 (rev 01)
---
v6:
- Use an alternative approach, in order to keep the Kirin 960 PHY internal to
the driver, in order to not break the DT schema. The PHY-specific code
were made self-contained at pcie-kirin, in order to make easier to split
it in the future, if needed.
v5:
- added "static" to hi3670_pcie_get_eyeparam() declaration on patch 6/8
v4:
- dropped the DTS patch, as it depends on a PMIC-related patch series;
- minor changes at the patch description;
- HiKey and HiSilicon are now using the preferred CamelCase format.
Manivannan Sadhasivam (1):
arm64: dts: HiSilicon: Add support for HiKey 970 PCIe controller
hardware
Mauro Carvalho Chehab (8):
PCI: kirin: Reorganize the PHY logic inside the driver
PCI: kirin: add support for a PHY layer
PCI: kirin: Use regmap for APB registers
dt-bindings: PCI: kirin: Fix compatible string
dt-bindings: phy: Add bindings for HiKey 970 PCIe PHY
phy: HiSilicon: Add driver for Kirin 970 PCIe PHY
dt-bindings: PCI: kirin-pcie.txt: Convert it to yaml
phy-hi3670-pcie: move reset-gpios to the PCIe DT schema
.../bindings/pci/hisilicon,kirin-pcie.yaml | 87 ++
.../devicetree/bindings/pci/kirin-pcie.txt | 50 -
.../devicetree/bindings/pci/snps,dw-pcie.yaml | 2 +-
.../phy/hisilicon,phy-hi3670-pcie.yaml | 94 ++
MAINTAINERS | 2 +-
arch/arm64/boot/dts/hisilicon/hi3670.dtsi | 70 ++
.../boot/dts/hisilicon/hikey970-pmic.dtsi | 1 -
drivers/pci/controller/dwc/pcie-kirin.c | 408 +++++---
drivers/phy/hisilicon/Kconfig | 10 +
drivers/phy/hisilicon/Makefile | 1 +
drivers/phy/hisilicon/phy-hi3670-pcie.c | 896 ++++++++++++++++++
11 files changed, 1424 insertions(+), 197 deletions(-)
create mode 100644 Documentation/devicetree/bindings/pci/hisilicon,kirin-pcie.yaml
delete mode 100644 Documentation/devicetree/bindings/pci/kirin-pcie.txt
create mode 100644 Documentation/devicetree/bindings/phy/hisilicon,phy-hi3670-pcie.yaml
create mode 100644 drivers/phy/hisilicon/phy-hi3670-pcie.c
--
2.31.1
Powered by blists - more mailing lists