| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Date: Tue, 20 Jul 2021 15:15:16 +0100
From: Stefan Hajnoczi <stefanha@...hat.com>
To: Marcelo Tosatti <mtosatti@...hat.com>
Cc: linux-kernel@...r.kernel.org,
Daniel Lezcano <daniel.lezcano@...aro.org>,
Stefano Garzarella <sgarzare@...hat.com>,
Ming Lei <ming.lei@...hat.com>,
"Michael S . Tsirkin" <mst@...hat.com>,
Jens Axboe <axboe@...nel.dk>, Jason Wang <jasowang@...hat.com>,
linux-block@...r.kernel.org,
"Rafael J. Wysocki" <rjw@...ysocki.net>,
virtualization@...ts.linux-foundation.org,
linux-pm@...r.kernel.org, Christoph Hellwig <hch@...radead.org>
Subject: Re: [RFC 1/3] cpuidle: add poll_source API
On Mon, Jul 19, 2021 at 06:03:55PM -0300, Marcelo Tosatti wrote:
> Hi Stefan,
>
> On Tue, Jul 13, 2021 at 05:19:04PM +0100, Stefan Hajnoczi wrote:
> > Introduce an API for adding cpuidle poll callbacks:
> >
> > struct poll_source_ops {
> > void (*start)(struct poll_source *src);
> > void (*stop)(struct poll_source *src);
> > void (*poll)(struct poll_source *src);
> > };
> >
> > int poll_source_register(struct poll_source *src);
> > int poll_source_unregister(struct poll_source *src);
> >
> > When cpuidle enters the poll state it invokes ->start() and then invokes
> > ->poll() repeatedly from the busy wait loop. Finally ->stop() is invoked
> > when the busy wait loop finishes.
> >
> > The ->poll() function should check for activity and cause
> > TIF_NEED_RESCHED to be set in order to stop the busy wait loop.
> >
> > This API is intended to be used by drivers that can cheaply poll for
> > events. Participating in cpuidle polling allows them to avoid interrupt
> > latencies during periods where the CPU is going to poll anyway.
> >
> > Note that each poll_source is bound to a particular CPU. The API is
> > mainly intended to by used by drivers that have multiple queues with irq
> > affinity.
> >
> > Signed-off-by: Stefan Hajnoczi <stefanha@...hat.com>
> > ---
> > drivers/cpuidle/Makefile | 1 +
> > include/linux/poll_source.h | 53 +++++++++++++++++++
> > drivers/cpuidle/poll_source.c | 99 +++++++++++++++++++++++++++++++++++
> > drivers/cpuidle/poll_state.c | 6 +++
> > 4 files changed, 159 insertions(+)
> > create mode 100644 include/linux/poll_source.h
> > create mode 100644 drivers/cpuidle/poll_source.c
> >
> > diff --git a/drivers/cpuidle/Makefile b/drivers/cpuidle/Makefile
> > index 26bbc5e74123..994f72d6fe95 100644
> > --- a/drivers/cpuidle/Makefile
> > +++ b/drivers/cpuidle/Makefile
> > @@ -7,6 +7,7 @@ obj-y += cpuidle.o driver.o governor.o sysfs.o governors/
> > obj-$(CONFIG_ARCH_NEEDS_CPU_IDLE_COUPLED) += coupled.o
> > obj-$(CONFIG_DT_IDLE_STATES) += dt_idle_states.o
> > obj-$(CONFIG_ARCH_HAS_CPU_RELAX) += poll_state.o
> > +obj-$(CONFIG_ARCH_HAS_CPU_RELAX) += poll_source.o
> > obj-$(CONFIG_HALTPOLL_CPUIDLE) += cpuidle-haltpoll.o
> >
> > ##################################################################################
> > diff --git a/include/linux/poll_source.h b/include/linux/poll_source.h
> > new file mode 100644
> > index 000000000000..ccfb424e170b
> > --- /dev/null
> > +++ b/include/linux/poll_source.h
> > @@ -0,0 +1,53 @@
> > +/* SPDX-License-Identifier: GPL-2.0-or-later */
> > +/*
> > + * poll_source.h - cpuidle busy waiting API
> > + */
> > +#ifndef __LINUX_POLLSOURCE_H__
> > +#define __LINUX_POLLSOURCE_H__
> > +
> > +#include <linux/list.h>
> > +
> > +struct poll_source;
> > +
> > +struct poll_source_ops {
> > + void (*start)(struct poll_source *src);
> > + void (*stop)(struct poll_source *src);
> > + void (*poll)(struct poll_source *src);
> > +};
> > +
> > +struct poll_source {
> > + const struct poll_source_ops *ops;
> > + struct list_head node;
> > + int cpu;
> > +};
> > +
> > +/**
> > + * poll_source_register - Add a poll_source for a CPU
> > + */
> > +#if defined(CONFIG_CPU_IDLE) && defined(CONFIG_ARCH_HAS_CPU_RELAX)
> > +int poll_source_register(struct poll_source *src);
> > +#else
> > +static inline int poll_source_register(struct poll_source *src)
> > +{
> > + return 0;
> > +}
> > +#endif
> > +
> > +/**
> > + * poll_source_unregister - Remove a previously registered poll_source
> > + */
> > +#if defined(CONFIG_CPU_IDLE) && defined(CONFIG_ARCH_HAS_CPU_RELAX)
> > +int poll_source_unregister(struct poll_source *src);
> > +#else
> > +static inline int poll_source_unregister(struct poll_source *src)
> > +{
> > + return 0;
> > +}
> > +#endif
> > +
> > +/* Used by the cpuidle driver */
> > +void poll_source_start(void);
> > +void poll_source_run_once(void);
> > +void poll_source_stop(void);
> > +
> > +#endif /* __LINUX_POLLSOURCE_H__ */
> > diff --git a/drivers/cpuidle/poll_source.c b/drivers/cpuidle/poll_source.c
> > new file mode 100644
> > index 000000000000..46100e5a71e4
> > --- /dev/null
> > +++ b/drivers/cpuidle/poll_source.c
> > @@ -0,0 +1,99 @@
> > +// SPDX-License-Identifier: GPL-2.0-or-later
> > +/*
> > + * poll_source.c - cpuidle busy waiting API
> > + */
> > +
> > +#include <linux/lockdep.h>
> > +#include <linux/percpu.h>
> > +#include <linux/poll_source.h>
> > +
> > +/* The per-cpu list of registered poll sources */
> > +DEFINE_PER_CPU(struct list_head, poll_source_list);
> > +
> > +/* Called from idle task with TIF_POLLING_NRFLAG set and irqs enabled */
> > +void poll_source_start(void)
> > +{
> > + struct poll_source *src;
> > +
> > + list_for_each_entry(src, this_cpu_ptr(&poll_source_list), node)
> > + src->ops->start(src);
> > +}
> > +
> > +/* Called from idle task with TIF_POLLING_NRFLAG set and irqs enabled */
> > +void poll_source_run_once(void)
> > +{
> > + struct poll_source *src;
> > +
> > + list_for_each_entry(src, this_cpu_ptr(&poll_source_list), node)
> > + src->ops->poll(src);
> > +}
> > +
> > +/* Called from idle task with TIF_POLLING_NRFLAG set and irqs enabled */
> > +void poll_source_stop(void)
> > +{
> > + struct poll_source *src;
> > +
> > + list_for_each_entry(src, this_cpu_ptr(&poll_source_list), node)
> > + src->ops->stop(src);
> > +}
> > +
> > +static void poll_source_register_this_cpu(void *opaque)
> > +{
> > + struct poll_source *src = opaque;
> > +
> > + lockdep_assert_irqs_disabled();
> > +
> > + list_add_tail(&src->node, this_cpu_ptr(&poll_source_list));
> > +}
> > +
> > +int poll_source_register(struct poll_source *src)
> > +{
> > + if (!list_empty(&src->node))
> > + return -EBUSY;
> > +
> > + /*
> > + * There is no race with src->cpu iterating over poll_source_list
> > + * because smp_call_function_single() just sets TIF_NEED_RESCHED
>
> Hum... what about
>
> CPU-0 CPU-1
>
> poll_source_start poll_source_register IPI'ing CPU-0
>
> Perhaps a llist can be used?
The simplest solution might be queue_work_on(src->cpu, system_hipri_wq,
&work) plus a completion. That way we know poll_source_start/stop/run()
are not executing and there can be no re-entrancy issues. The nice thing
is it's simple - no low-level tricks.
Those are the semantics I wanted with smp_call_function_single() but I
think I chose the wrong API :).
> > while (!need_resched()) {
> > + poll_source_run_once();
>
> Probably want to use static_key's for ->start, ->stop and ->poll?
Good idea, thanks.
Stefan
Download attachment "signature.asc" of type "application/pgp-signature" (489 bytes)
Powered by blists - more mailing lists