linux-kernel - [PATCH 0/2] arm64: dts: allwinner: h6: tanix-tx6: Enable eMMC

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [thread-next>] [day] [month] [year] [list]

Date:   Wed, 21 Jul 2021 22:08:30 +0200
From:   Jernej Skrabec <jernej.skrabec@...il.com>
To:     mripard@...nel.org, wens@...e.org
Cc:     robh+dt@...nel.org, jernej.skrabec@...il.com,
        devicetree@...r.kernel.org, linux-arm-kernel@...ts.infradead.org,
        linux-sunxi@...ts.linux.dev, linux-kernel@...r.kernel.org
Subject: [PATCH 0/2] arm64: dts: allwinner: h6: tanix-tx6: Enable eMMC

Tanix TX6 box has a 32 GB eMMC module. With changes in this series, I
get following figures with hdparm -tT:

/dev/mmcblk2:
 Timing cached reads:   1638 MB in  2.00 seconds = 818.44 MB/sec
 Timing buffered disk reads: 376 MB in  3.01 seconds = 124.74 MB/sec

First patch only sets proper power supplies to GPIO banks and second
adds eMMC support.

Please take a look.

Best regards,
Jernej Skrabec

Jernej Skrabec (2):
  arm64: dts: allwinner: h6: tanix-tx6: Add PIO power supplies
  arm64: dts: allwinner: h6: tanix-tx6: enable emmc

 .../dts/allwinner/sun50i-h6-tanix-tx6.dts     | 23 +++++++++++++++++++
 1 file changed, 23 insertions(+)

-- 
2.32.0