[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <20210721070904.15636-3-roger.lu@mediatek.com>
Date: Wed, 21 Jul 2021 15:08:59 +0800
From: Roger Lu <roger.lu@...iatek.com>
To: Matthias Brugger <matthias.bgg@...il.com>,
Enric Balletbo Serra <eballetbo@...il.com>,
Kevin Hilman <khilman@...nel.org>,
Rob Herring <robh+dt@...nel.org>,
Nicolas Boichat <drinkcat@...gle.com>,
Stephen Boyd <sboyd@...nel.org>,
Philipp Zabel <p.zabel@...gutronix.de>
CC: Fan Chen <fan.chen@...iatek.com>,
HenryC Chen <HenryC.Chen@...iatek.com>,
YT Lee <yt.lee@...iatek.com>,
Xiaoqing Liu <Xiaoqing.Liu@...iatek.com>,
Charles Yang <Charles.Yang@...iatek.com>,
Angus Lin <Angus.Lin@...iatek.com>,
Mark Rutland <mark.rutland@....com>,
Nishanth Menon <nm@...com>, Roger Lu <roger.lu@...iatek.com>,
<devicetree@...r.kernel.org>,
<linux-arm-kernel@...ts.infradead.org>,
<linux-mediatek@...ts.infradead.org>,
<linux-kernel@...r.kernel.org>, <linux-pm@...r.kernel.org>,
<Project_Global_Chrome_Upstream_Group@...iatek.com>,
Guenter Roeck <linux@...ck-us.net>
Subject: [PATCH v20 2/7] arm64: dts: mt8183: add svs device information
add compitable/reg/irq/clock/efuse setting in svs node
Signed-off-by: Roger Lu <roger.lu@...iatek.com>
---
arch/arm64/boot/dts/mediatek/mt8183.dtsi | 15 +++++++++++++++
1 file changed, 15 insertions(+)
diff --git a/arch/arm64/boot/dts/mediatek/mt8183.dtsi b/arch/arm64/boot/dts/mediatek/mt8183.dtsi
index f90df6439c08..1e57999a3add 100644
--- a/arch/arm64/boot/dts/mediatek/mt8183.dtsi
+++ b/arch/arm64/boot/dts/mediatek/mt8183.dtsi
@@ -743,6 +743,18 @@
status = "disabled";
};
+ svs: svs@...0b000 {
+ compatible = "mediatek,mt8183-svs";
+ reg = <0 0x1100b000 0 0x1000>;
+ interrupts = <GIC_SPI 127 IRQ_TYPE_LEVEL_LOW>;
+ clocks = <&infracfg CLK_INFRA_THERM>;
+ clock-names = "main";
+ nvmem-cells = <&svs_calibration>,
+ <&thermal_calibration>;
+ nvmem-cell-names = "svs-calibration-data",
+ "t-calibration-data";
+ };
+
thermal: thermal@...0b000 {
#thermal-sensor-cells = <1>;
compatible = "mediatek,mt8183-thermal";
@@ -1169,6 +1181,9 @@
mipi_tx_calibration: calib@190 {
reg = <0x190 0xc>;
};
+ svs_calibration: calib@580 {
+ reg = <0x580 0x64>;
+ };
};
u3phy: t-phy@...40000 {
--
2.18.0
Powered by blists - more mailing lists