lists.openwall.net   lists  /  announce  owl-users  owl-dev  john-users  john-dev  passwdqc-users  yescrypt  popa3d-users  /  oss-security  kernel-hardening  musl  sabotage  tlsify  passwords  /  crypt-dev  xvendor  /  Bugtraq  Full-Disclosure  linux-kernel  linux-netdev  linux-ext4  linux-hardening  linux-cve-announce  PHC 
Open Source and information security mailing list archives
 
Hash Suite: Windows password security audit tool. GUI, reports in PDF.
[<prev] [next>] [<thread-prev] [day] [month] [year] [list]
Message-Id: <20210721101220.22781-3-qiangqing.zhang@nxp.com>
Date:   Wed, 21 Jul 2021 18:12:20 +0800
From:   Joakim Zhang <qiangqing.zhang@....com>
To:     davem@...emloft.net, kuba@...nel.org, robh+dt@...nel.org,
        shawnguo@...nel.org, s.hauer@...gutronix.de, kernel@...gutronix.de,
        festevam@...il.com
Cc:     linux-imx@....com, netdev@...r.kernel.org,
        linux-kernel@...r.kernel.org, linux-arm-kernel@...ts.infradead.org
Subject: [PATCH net-next 2/2] ARM: dts: imx6qdl: move phy properties into phy device node

This patch fixes issues found by dtbs_check:
make ARCH=arm CROSS_COMPILE=arm-linux-gnueabihf- dtbs_check DT_SCHEMA_FILES=Documentation/devicetree/bindings/net/fsl,fec.yaml

According to the Micrel PHY dt-binding:
Documentation/devicetree/bindings/net/micrel-ksz90x1.txt,
Add clock delay in an Ethernet OF device node is deprecated, so move
these properties to PHY OF device node.

Suggested-by: Rob Herring <robh@...nel.org>
Signed-off-by: Joakim Zhang <qiangqing.zhang@....com>
---
 arch/arm/boot/dts/imx6q-novena.dts           | 34 +++++++++++++-------
 arch/arm/boot/dts/imx6qdl-aristainetos2.dtsi | 18 ++++++++---
 arch/arm/boot/dts/imx6qdl-nit6xlite.dtsi     | 34 +++++++++++++-------
 arch/arm/boot/dts/imx6qdl-nitrogen6_max.dtsi | 34 +++++++++++++-------
 arch/arm/boot/dts/imx6qdl-nitrogen6x.dtsi    | 34 +++++++++++++-------
 arch/arm/boot/dts/imx6qdl-sabrelite.dtsi     | 34 +++++++++++++-------
 6 files changed, 124 insertions(+), 64 deletions(-)

diff --git a/arch/arm/boot/dts/imx6q-novena.dts b/arch/arm/boot/dts/imx6q-novena.dts
index 52e3567d1859..225cf6b7a7a4 100644
--- a/arch/arm/boot/dts/imx6q-novena.dts
+++ b/arch/arm/boot/dts/imx6q-novena.dts
@@ -222,20 +222,30 @@
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_enet_novena>;
 	phy-mode = "rgmii";
+	phy-handle = <&ethphy>;
 	phy-reset-gpios = <&gpio3 23 GPIO_ACTIVE_LOW>;
-	rxc-skew-ps = <3000>;
-	rxdv-skew-ps = <0>;
-	txc-skew-ps = <3000>;
-	txen-skew-ps = <0>;
-	rxd0-skew-ps = <0>;
-	rxd1-skew-ps = <0>;
-	rxd2-skew-ps = <0>;
-	rxd3-skew-ps = <0>;
-	txd0-skew-ps = <3000>;
-	txd1-skew-ps = <3000>;
-	txd2-skew-ps = <3000>;
-	txd3-skew-ps = <3000>;
 	status = "okay";
+
+	mdio {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		ethphy: ethernet-phy {
+			compatible = "ethernet-phy-ieee802.3-c22";
+			rxc-skew-ps = <3000>;
+			rxdv-skew-ps = <0>;
+			txc-skew-ps = <3000>;
+			txen-skew-ps = <0>;
+			rxd0-skew-ps = <0>;
+			rxd1-skew-ps = <0>;
+			rxd2-skew-ps = <0>;
+			rxd3-skew-ps = <0>;
+			txd0-skew-ps = <3000>;
+			txd1-skew-ps = <3000>;
+			txd2-skew-ps = <3000>;
+			txd3-skew-ps = <3000>;
+		};
+	};
 };
 
 &hdmi {
diff --git a/arch/arm/boot/dts/imx6qdl-aristainetos2.dtsi b/arch/arm/boot/dts/imx6qdl-aristainetos2.dtsi
index ead7ba27e105..563bf9d44fe0 100644
--- a/arch/arm/boot/dts/imx6qdl-aristainetos2.dtsi
+++ b/arch/arm/boot/dts/imx6qdl-aristainetos2.dtsi
@@ -316,12 +316,22 @@
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_enet>;
 	phy-mode = "rgmii";
+	phy-handle = <&ethphy>;
 	phy-reset-gpios = <&gpio7 18 GPIO_ACTIVE_LOW>;
-	txd0-skew-ps = <0>;
-	txd1-skew-ps = <0>;
-	txd2-skew-ps = <0>;
-	txd3-skew-ps = <0>;
 	status = "okay";
+
+	mdio {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		ethphy: ethernet-phy {
+			compatible = "ethernet-phy-ieee802.3-c22";
+			txd0-skew-ps = <0>;
+			txd1-skew-ps = <0>;
+			txd2-skew-ps = <0>;
+			txd3-skew-ps = <0>;
+		};
+	};
 };
 
 &gpmi {
diff --git a/arch/arm/boot/dts/imx6qdl-nit6xlite.dtsi b/arch/arm/boot/dts/imx6qdl-nit6xlite.dtsi
index d526f01a2c52..ac34709e9741 100644
--- a/arch/arm/boot/dts/imx6qdl-nit6xlite.dtsi
+++ b/arch/arm/boot/dts/imx6qdl-nit6xlite.dtsi
@@ -190,23 +190,33 @@
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_enet>;
 	phy-mode = "rgmii";
+	phy-handle = <&ethphy>;
 	phy-reset-gpios = <&gpio1 27 GPIO_ACTIVE_LOW>;
-	txen-skew-ps = <0>;
-	txc-skew-ps = <3000>;
-	rxdv-skew-ps = <0>;
-	rxc-skew-ps = <3000>;
-	rxd0-skew-ps = <0>;
-	rxd1-skew-ps = <0>;
-	rxd2-skew-ps = <0>;
-	rxd3-skew-ps = <0>;
-	txd0-skew-ps = <0>;
-	txd1-skew-ps = <0>;
-	txd2-skew-ps = <0>;
-	txd3-skew-ps = <0>;
 	interrupts-extended = <&gpio1 6 IRQ_TYPE_LEVEL_HIGH>,
 			      <&intc 0 119 IRQ_TYPE_LEVEL_HIGH>;
 	fsl,err006687-workaround-present;
 	status = "okay";
+
+	mdio {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		ethphy: ethernet-phy {
+			compatible = "ethernet-phy-ieee802.3-c22";
+			txen-skew-ps = <0>;
+			txc-skew-ps = <3000>;
+			rxdv-skew-ps = <0>;
+			rxc-skew-ps = <3000>;
+			rxd0-skew-ps = <0>;
+			rxd1-skew-ps = <0>;
+			rxd2-skew-ps = <0>;
+			rxd3-skew-ps = <0>;
+			txd0-skew-ps = <0>;
+			txd1-skew-ps = <0>;
+			txd2-skew-ps = <0>;
+			txd3-skew-ps = <0>;
+		};
+	};
 };
 
 &hdmi {
diff --git a/arch/arm/boot/dts/imx6qdl-nitrogen6_max.dtsi b/arch/arm/boot/dts/imx6qdl-nitrogen6_max.dtsi
index a0917823c244..c96f4d7e1e0d 100644
--- a/arch/arm/boot/dts/imx6qdl-nitrogen6_max.dtsi
+++ b/arch/arm/boot/dts/imx6qdl-nitrogen6_max.dtsi
@@ -332,23 +332,33 @@
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_enet>;
 	phy-mode = "rgmii";
+	phy-handle = <&ethphy>;
 	phy-reset-gpios = <&gpio1 27 GPIO_ACTIVE_LOW>;
-	txen-skew-ps = <0>;
-	txc-skew-ps = <3000>;
-	rxdv-skew-ps = <0>;
-	rxc-skew-ps = <3000>;
-	rxd0-skew-ps = <0>;
-	rxd1-skew-ps = <0>;
-	rxd2-skew-ps = <0>;
-	rxd3-skew-ps = <0>;
-	txd0-skew-ps = <0>;
-	txd1-skew-ps = <0>;
-	txd2-skew-ps = <0>;
-	txd3-skew-ps = <0>;
 	interrupts-extended = <&gpio1 6 IRQ_TYPE_LEVEL_HIGH>,
 			      <&intc 0 119 IRQ_TYPE_LEVEL_HIGH>;
 	fsl,err006687-workaround-present;
 	status = "okay";
+
+	mdio {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		ethphy: ethernet-phy {
+			compatible = "ethernet-phy-ieee802.3-c22";
+			txen-skew-ps = <0>;
+			txc-skew-ps = <3000>;
+			rxdv-skew-ps = <0>;
+			rxc-skew-ps = <3000>;
+			rxd0-skew-ps = <0>;
+			rxd1-skew-ps = <0>;
+			rxd2-skew-ps = <0>;
+			rxd3-skew-ps = <0>;
+			txd0-skew-ps = <0>;
+			txd1-skew-ps = <0>;
+			txd2-skew-ps = <0>;
+			txd3-skew-ps = <0>;
+		};
+	};
 };
 
 &hdmi {
diff --git a/arch/arm/boot/dts/imx6qdl-nitrogen6x.dtsi b/arch/arm/boot/dts/imx6qdl-nitrogen6x.dtsi
index 1243677b5f97..49da30d7510c 100644
--- a/arch/arm/boot/dts/imx6qdl-nitrogen6x.dtsi
+++ b/arch/arm/boot/dts/imx6qdl-nitrogen6x.dtsi
@@ -265,23 +265,33 @@
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_enet>;
 	phy-mode = "rgmii";
+	phy-handle = <&ethphy>;
 	phy-reset-gpios = <&gpio1 27 GPIO_ACTIVE_LOW>;
-	txen-skew-ps = <0>;
-	txc-skew-ps = <3000>;
-	rxdv-skew-ps = <0>;
-	rxc-skew-ps = <3000>;
-	rxd0-skew-ps = <0>;
-	rxd1-skew-ps = <0>;
-	rxd2-skew-ps = <0>;
-	rxd3-skew-ps = <0>;
-	txd0-skew-ps = <0>;
-	txd1-skew-ps = <0>;
-	txd2-skew-ps = <0>;
-	txd3-skew-ps = <0>;
 	interrupts-extended = <&gpio1 6 IRQ_TYPE_LEVEL_HIGH>,
 			      <&intc 0 119 IRQ_TYPE_LEVEL_HIGH>;
 	fsl,err006687-workaround-present;
 	status = "okay";
+
+	mdio {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		ethphy: ethernet-phy {
+			compatible = "ethernet-phy-ieee802.3-c22";
+			txen-skew-ps = <0>;
+			txc-skew-ps = <3000>;
+			rxdv-skew-ps = <0>;
+			rxc-skew-ps = <3000>;
+			rxd0-skew-ps = <0>;
+			rxd1-skew-ps = <0>;
+			rxd2-skew-ps = <0>;
+			rxd3-skew-ps = <0>;
+			txd0-skew-ps = <0>;
+			txd1-skew-ps = <0>;
+			txd2-skew-ps = <0>;
+			txd3-skew-ps = <0>;
+		};
+	};
 };
 
 &hdmi {
diff --git a/arch/arm/boot/dts/imx6qdl-sabrelite.dtsi b/arch/arm/boot/dts/imx6qdl-sabrelite.dtsi
index fdc3aa9d544d..eb9a0b104f1c 100644
--- a/arch/arm/boot/dts/imx6qdl-sabrelite.dtsi
+++ b/arch/arm/boot/dts/imx6qdl-sabrelite.dtsi
@@ -324,20 +324,30 @@
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_enet>;
 	phy-mode = "rgmii";
+	phy-handle = <&ethphy>;
 	phy-reset-gpios = <&gpio3 23 GPIO_ACTIVE_LOW>;
-	txen-skew-ps = <0>;
-	txc-skew-ps = <3000>;
-	rxdv-skew-ps = <0>;
-	rxc-skew-ps = <3000>;
-	rxd0-skew-ps = <0>;
-	rxd1-skew-ps = <0>;
-	rxd2-skew-ps = <0>;
-	rxd3-skew-ps = <0>;
-	txd0-skew-ps = <0>;
-	txd1-skew-ps = <0>;
-	txd2-skew-ps = <0>;
-	txd3-skew-ps = <0>;
 	status = "okay";
+
+	mdio {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		ethphy: ethernet-phy {
+			compatible = "ethernet-phy-ieee802.3-c22";
+			txen-skew-ps = <0>;
+			txc-skew-ps = <3000>;
+			rxdv-skew-ps = <0>;
+			rxc-skew-ps = <3000>;
+			rxd0-skew-ps = <0>;
+			rxd1-skew-ps = <0>;
+			rxd2-skew-ps = <0>;
+			rxd3-skew-ps = <0>;
+			txd0-skew-ps = <0>;
+			txd1-skew-ps = <0>;
+			txd2-skew-ps = <0>;
+			txd3-skew-ps = <0>;
+		};
+	};
 };
 
 &hdmi {
-- 
2.17.1

Powered by blists - more mailing lists

Powered by Openwall GNU/*/Linux Powered by OpenVZ