Message-ID: <YPqjTauZTpN6jHUe@kroah.com>
Date:   Fri, 23 Jul 2021 13:09:01 +0200
From:   Greg KH <gregkh@...uxfoundation.org>
To:     Phillip Potter <phil@...lpotter.co.uk>
Cc:     Larry.Finger@...inger.net, dan.carpenter@...cle.com,
        linux-kernel@...r.kernel.org, linux-staging@...ts.linux.dev,
        fabioaiuto83@...il.com
Subject: Re: [PATCH 6/7] staging: rtl8188eu: introduce new supporting files
 for RTL8188eu driver

On Fri, Jul 23, 2021 at 01:42:13AM +0100, Phillip Potter wrote:
> This patchset is split in order to keep the file sizes down. These
> supporting files are part of the newer/better driver from GitHub modified by
> Larry Finger. Import this as the basis for all future work going
> forward. Also, modify Makefile so that driver has same module filename
> as original rtl8188eu driver from staging.
> 
> Suggested-by: Larry Finger <Larry.Finger@...inger.net>
> Signed-off-by: Phillip Potter <phil@...lpotter.co.uk>
> ---
>  drivers/staging/rtl8188eu/COPYING  | 356 ++++++++++++++++++++

This file is not needed in here at all, just drop it, otherwise that
would be the first patch we submit after this :)

> diff --git a/drivers/staging/rtl8188eu/Kconfig b/drivers/staging/rtl8188eu/Kconfig
> new file mode 100644
> index 000000000000..970d5abd6336
> --- /dev/null
> +++ b/drivers/staging/rtl8188eu/Kconfig
> @@ -0,0 +1,25 @@
> +# SPDX-License-Identifier: GPL-2.0
> +config R8188EU
> +	tristate "Realtek RTL8188EU Wireless LAN NIC driver"
> +	depends on WLAN && USB && CFG80211
> +	depends on m

why m?

> +	select WIRELESS_EXT
> +	select WEXT_PRIV
> +	select LIB80211
> +	select LIB80211_CRYPT_WEP
> +	select LIB80211_CRYPT_CCMP
> +	help
> +	This option adds the Realtek RTL8188EU USB device such as TP-Link TL-WN725N.
> +	If built as a module, it will be called r8188eu.

Then how about we put this in drivers/staging/r8188eu/ instead of
"rtl8188eu" so that people do not get confused over time?  Having a
different directory name will make it obvious this is a new driver
entirely and no backports will happen incorrectly and other people who
get out of sync in sending patches will know obviously what happened.

> +
> +if R8188EU
> +
> +config 88EU_AP_MODE
> +	bool "Realtek RTL8188EU AP mode"
> +	default y

default y is only if the machine will not boot without this.  Please
drop this line.

> +	help
> +	This option enables Access Point mode. Unless you know that your system
> +	will never be used as an AP, or the target system has limited memory,
> +	"Y" should be selected.
> +
> +endif
> diff --git a/drivers/staging/rtl8188eu/Makefile b/drivers/staging/rtl8188eu/Makefile
> new file mode 100755
> index 000000000000..6c30c8d95b87
> --- /dev/null
> +++ b/drivers/staging/rtl8188eu/Makefile
> @@ -0,0 +1,509 @@
> +EXTRA_CFLAGS += $(USER_EXTRA_CFLAGS)
> +EXTRA_CFLAGS += -O1 -g
> +#EXTRA_CFLAGS += -O3
> +#EXTRA_CFLAGS += -Wall
> +#EXTRA_CFLAGS += -Wextra
> +#EXTRA_CFLAGS += -Werror
> +#EXTRA_CFLAGS += -pedantic
> +#EXTRA_CFLAGS += -Wshadow -Wpointer-arith -Wcast-qual -Wstrict-prototypes -Wmissing-prototypes

Just drop these commented out lines right now.

> +
> +EXTRA_CFLAGS += -Wno-unused-variable
> +EXTRA_CFLAGS += -Wno-unused-value
> +EXTRA_CFLAGS += -Wno-unused-label
> +EXTRA_CFLAGS += -Wno-unused-parameter
> +EXTRA_CFLAGS += -Wno-unused-function
> +EXTRA_CFLAGS += -Wno-unused
> +EXTRA_CFLAGS += -Wno-uninitialized

I doubt those are needed, but we can handle that later.

> +
> +GCC_VER_49 := $(shell echo `$(CC) -dumpversion | cut -f1-2 -d.` \>= 4.9 | bc )
> +ifeq ($(GCC_VER_49),1)
> +EXTRA_CFLAGS += -Wno-date-time	# Fix compile error && warning on gcc 4.9 and later
> +endif

That's very odd, we can deal with that later.

> +
> +EXTRA_CFLAGS += -I$(src)/include
> +EXTRA_CFLAGS += -I$(src)/hal
> +
> +#EXTRA_LDFLAGS += --strip-debug
> +
> +CONFIG_AUTOCFG_CP = n

What is that?

> +
> +########################## Features ###########################
> +CONFIG_MP_INCLUDED = y
> +CONFIG_POWER_SAVING = y
> +CONFIG_USB_AUTOSUSPEND = n
> +CONFIG_HW_PWRP_DETECTION = n
> +CONFIG_WIFI_TEST = n
> +CONFIG_BT_COEXIST = n
> +CONFIG_INTEL_WIDI = n
> +CONFIG_WAPI_SUPPORT = n
> +CONFIG_EFUSE_CONFIG_FILE = y
> +CONFIG_EXT_CLK = n
> +CONFIG_TRAFFIC_PROTECT = y
> +CONFIG_LOAD_PHY_PARA_FROM_FILE = y
> +CONFIG_TXPWR_BY_RATE_EN = n
> +CONFIG_TXPWR_LIMIT_EN = n
> +CONFIG_RTW_ADAPTIVITY_EN = disable
> +CONFIG_RTW_ADAPTIVITY_MODE = normal
> +CONFIG_SIGNAL_SCALE_MAPPING = n
> +CONFIG_80211W = n
> +CONFIG_REDUCE_TX_CPU_LOADING = n
> +CONFIG_BR_EXT = y
> +CONFIG_TDLS = n
> +CONFIG_WIFI_MONITOR = n
> +CONFIG_MCC_MODE = n
> +CONFIG_APPEND_VENDOR_IE_ENABLE = n
> +CONFIG_RTW_NAPI = y
> +CONFIG_RTW_GRO = y
> +########################## Debug ###########################
> +CONFIG_RTW_DEBUG = y
> +# default log level is _DRV_INFO_ = 4,
> +# please refer to "How_to_set_driver_debug_log_level.doc" to set the available level.
> +CONFIG_RTW_LOG_LEVEL = 2
> +######################## Wake On Lan ##########################
> +CONFIG_WOWLAN = n
> +CONFIG_GPIO_WAKEUP = n
> +CONFIG_DEFAULT_PATTERNS_EN = n
> +CONFIG_WAKEUP_GPIO_IDX = default
> +CONFIG_HIGH_ACTIVE = n
> +CONFIG_PNO_SUPPORT = n
> +CONFIG_PNO_SET_DEBUG = n
> +CONFIG_AP_WOWLAN = n
> +######### Notify SDIO Host Keep Power During Syspend ##########
> +CONFIG_RTW_SDIO_PM_KEEP_POWER = y
> +###################### MP HW TX MODE FOR VHT #######################
> +CONFIG_MP_VHT_HW_TX_MODE = n
> +###################### Platform Related #######################
> +CONFIG_PLATFORM_I386_PC = y
> +###############################################################
> +
> +CONFIG_DRVEXT_MODULE = n

I bet all of these config options can be removed, but that can come
later.

> +
> +export TopDIR ?= $(CURDIR)
> +
> +MSG="Directory .git does not exist indicating that you downloaded the source as a zip file. Only the 'git clone' method is now supported."

Odd, but not needed for building in the kernel tree.

> +
> +########### COMMON  #################################
> +
> +HCI_NAME = usb
> +
> +_OS_INTFS_FILES :=	os_dep/osdep_service.o \
> +			os_dep/os_intfs.o \
> +			os_dep/$(HCI_NAME)_intf.o \
> +			os_dep/$(HCI_NAME)_ops_linux.o \
> +			os_dep/ioctl_linux.o \
> +			os_dep/xmit_linux.o \
> +			os_dep/mlme_linux.o \
> +			os_dep/recv_linux.o \
> +			os_dep/ioctl_cfg80211.o \
> +			os_dep/rtw_cfgvendor.o \
> +			os_dep/wifi_regd.o \
> +			os_dep/rtw_android.o \
> +			os_dep/rtw_proc.o
> +
> +ifeq ($(CONFIG_MP_INCLUDED), y)
> +_OS_INTFS_FILES += os_dep/ioctl_mp.o
> +endif
> +
> +_HAL_INTFS_FILES :=	hal/hal_intf.o \
> +			hal/hal_com.o \
> +			hal/hal_com_phycfg.o \
> +			hal/hal_phy.o \
> +			hal/hal_dm.o \
> +			hal/hal_btcoex_wifionly.o \
> +			hal/hal_btcoex.o \
> +			hal/hal_mp.o \
> +			hal/hal_mcc.o \
> +			hal/hal_$(HCI_NAME).o \
> +			hal/hal_$(HCI_NAME)_led.o
> +
> +			

Trailing whitespace :(

> +_OUTSRC_FILES := hal/phydm_debug.o	\
> +		hal/phydm_antdiv.o\
> +		hal/phydm_antdect.o\
> +		hal/phydm_interface.o\
> +		hal/phydm_hwconfig.o\
> +		hal/phydm.o\
> +		hal/halphyrf_ce.o\
> +		hal/phydm_edcaturbocheck.o\
> +		hal/phydm_dig.o\
> +		hal/phydm_pathdiv.o\
> +		hal/phydm_rainfo.o\
> +		hal/phydm_dynamicbbpowersaving.o\
> +		hal/phydm_powertracking_ce.o\
> +		hal/phydm_dynamictxpower.o\
> +		hal/phydm_adaptivity.o\
> +		hal/phydm_cfotracking.o\
> +		hal/phydm_noisemonitor.o\
> +		hal/phydm_acs.o\
> +		hal/phydm_dfs.o\
> +		hal/phydm_hal_txbf_api.o\
> +		hal/phydm_adc_sampling.o\
> +		hal/phydm_kfree.o\
> +		hal/phydm_ccx.o
> +
> +
> +EXTRA_CFLAGS += -I$(src)/platform
> +
> +EXTRA_CFLAGS += -I$(src)/hal/btc
> +
> +RTL871X = rtl8188e
> +
> +_HAL_INTFS_FILES +=	hal/HalPwrSeqCmd.o \
> +					hal/Hal8188EPwrSeq.o\
> + 					hal/$(RTL871X)_xmit.o\
> +					hal/$(RTL871X)_sreset.o
> +
> +_HAL_INTFS_FILES +=	hal/$(RTL871X)_hal_init.o \
> +			hal/$(RTL871X)_phycfg.o \
> +			hal/$(RTL871X)_rf6052.o \
> +			hal/$(RTL871X)_dm.o \
> +			hal/$(RTL871X)_rxdesc.o \
> +			hal/$(RTL871X)_cmd.o \
> +			hal/hal8188e_s_fw.o \
> +			hal/hal8188e_t_fw.o \
> +			hal/$(HCI_NAME)_halinit.o \
> +			hal/rtl8188eu_led.o \
> +			hal/rtl8188eu_xmit.o \
> +			hal/rtl8188eu_recv.o
> +
> +_HAL_INTFS_FILES += hal/$(HCI_NAME)_ops_linux.o
> +
> +_HAL_INTFS_FILES +=hal/HalEfuseMask8188E_USB.o
> +
> +#hal/OUTSRC/Hal8188EFWImg_CE.o
> +_OUTSRC_FILES += hal/halhwimg8188e_mac.o\
> +		hal/halhwimg8188e_bb.o\
> +		hal/halhwimg8188e_rf.o\
> +		hal/halphyrf_8188e_ce.o\
> +		hal/phydm_regconfig8188e.o\
> +		hal/hal8188erateadaptive.o\
> +		hal/phydm_rtl8188e.o
> +
> +########### AUTO_CFG  #################################
> +
> +ifeq ($(CONFIG_AUTOCFG_CP), y)
> +
> +ifeq ($(CONFIG_MULTIDRV), y)
> +$(shell cp $(TopDIR)/autoconf_multidrv_$(HCI_NAME)_linux.h $(TopDIR)/include/autoconf.h)
> +endif
> +
> +endif
> +
> +########### END OF PATH  #################################
> +
> +ifeq ($(CONFIG_USB_AUTOSUSPEND), y)
> +EXTRA_CFLAGS += -DCONFIG_USB_AUTOSUSPEND
> +endif
> +
> +ifeq ($(CONFIG_MP_INCLUDED), y)
> +#MODULE_NAME := 8188eu_mp
> +EXTRA_CFLAGS += -DCONFIG_MP_INCLUDED
> +endif
> +
> +ifeq ($(CONFIG_POWER_SAVING), y)
> +EXTRA_CFLAGS += -DCONFIG_POWER_SAVING
> +endif
> +
> +ifeq ($(CONFIG_HW_PWRP_DETECTION), y)
> +EXTRA_CFLAGS += -DCONFIG_HW_PWRP_DETECTION
> +endif
> +
> +ifeq ($(CONFIG_WIFI_TEST), y)
> +EXTRA_CFLAGS += -DCONFIG_WIFI_TEST
> +endif
> +
> +ifeq ($(CONFIG_BT_COEXIST), y)
> +EXTRA_CFLAGS += -DCONFIG_BT_COEXIST
> +endif
> +
> +ifeq ($(CONFIG_INTEL_WIDI), y)
> +EXTRA_CFLAGS += -DCONFIG_INTEL_WIDI
> +endif
> +
> +ifeq ($(CONFIG_WAPI_SUPPORT), y)
> +EXTRA_CFLAGS += -DCONFIG_WAPI_SUPPORT
> +endif
> +
> +
> +ifeq ($(CONFIG_EFUSE_CONFIG_FILE), y)
> +EXTRA_CFLAGS += -DCONFIG_EFUSE_CONFIG_FILE
> +
> +#EFUSE_MAP_PATH
> +USER_EFUSE_MAP_PATH ?=
> +ifneq ($(USER_EFUSE_MAP_PATH),)
> +EXTRA_CFLAGS += -DEFUSE_MAP_PATH=\"$(USER_EFUSE_MAP_PATH)\"
> +else ifeq (r8188eu, 8189es)
> +EXTRA_CFLAGS += -DEFUSE_MAP_PATH=\"/system/etc/wifi/wifi_efuse_8189e.map\"
> +else ifeq (r8188eu, 8723bs)
> +EXTRA_CFLAGS += -DEFUSE_MAP_PATH=\"/system/etc/wifi/wifi_efuse_8723bs.map\"
> +else
> +EXTRA_CFLAGS += -DEFUSE_MAP_PATH=\"/system/etc/wifi/wifi_efuse_8188eu.map\"
> +endif
> +
> +#WIFIMAC_PATH
> +USER_WIFIMAC_PATH ?=
> +ifneq ($(USER_WIFIMAC_PATH),)
> +EXTRA_CFLAGS += -DWIFIMAC_PATH=\"$(USER_WIFIMAC_PATH)\"
> +else
> +EXTRA_CFLAGS += -DWIFIMAC_PATH=\"/data/wifimac.txt\"
> +endif
> +
> +endif
> +
> +ifeq ($(CONFIG_EXT_CLK), y)
> +EXTRA_CFLAGS += -DCONFIG_EXT_CLK
> +endif
> +
> +ifeq ($(CONFIG_TRAFFIC_PROTECT), y)
> +EXTRA_CFLAGS += -DCONFIG_TRAFFIC_PROTECT
> +endif
> +
> +ifeq ($(CONFIG_LOAD_PHY_PARA_FROM_FILE), y)
> +EXTRA_CFLAGS += -DCONFIG_LOAD_PHY_PARA_FROM_FILE
> +#EXTRA_CFLAGS += -DREALTEK_CONFIG_PATH_WITH_IC_NAME_FOLDER
> +#EXTRA_CFLAGS += -DREALTEK_CONFIG_PATH=\"/lib/firmware/\"
> +EXTRA_CFLAGS += -DREALTEK_CONFIG_PATH=\"\"
> +endif
> +
> +ifeq ($(CONFIG_TXPWR_BY_RATE_EN), n)
> +EXTRA_CFLAGS += -DCONFIG_TXPWR_BY_RATE_EN=0
> +else ifeq ($(CONFIG_TXPWR_BY_RATE_EN), y)
> +EXTRA_CFLAGS += -DCONFIG_TXPWR_BY_RATE_EN=1
> +else ifeq ($(CONFIG_TXPWR_BY_RATE_EN), auto)
> +EXTRA_CFLAGS += -DCONFIG_TXPWR_BY_RATE_EN=2
> +endif
> +
> +ifeq ($(CONFIG_TXPWR_LIMIT_EN), n)
> +EXTRA_CFLAGS += -DCONFIG_TXPWR_LIMIT_EN=0
> +else ifeq ($(CONFIG_TXPWR_LIMIT_EN), y)
> +EXTRA_CFLAGS += -DCONFIG_TXPWR_LIMIT_EN=1
> +else ifeq ($(CONFIG_TXPWR_LIMIT_EN), auto)
> +EXTRA_CFLAGS += -DCONFIG_TXPWR_LIMIT_EN=2
> +endif
> +
> +ifeq ($(CONFIG_CALIBRATE_TX_POWER_BY_REGULATORY), y)
> +EXTRA_CFLAGS += -DCONFIG_CALIBRATE_TX_POWER_BY_REGULATORY
> +endif
> +
> +ifeq ($(CONFIG_CALIBRATE_TX_POWER_TO_MAX), y)
> +EXTRA_CFLAGS += -DCONFIG_CALIBRATE_TX_POWER_TO_MAX
> +endif
> +
> +ifeq ($(CONFIG_RTW_ADAPTIVITY_EN), disable)
> +EXTRA_CFLAGS += -DCONFIG_RTW_ADAPTIVITY_EN=0
> +else ifeq ($(CONFIG_RTW_ADAPTIVITY_EN), enable)
> +EXTRA_CFLAGS += -DCONFIG_RTW_ADAPTIVITY_EN=1
> +endif
> +
> +ifeq ($(CONFIG_RTW_ADAPTIVITY_MODE), normal)
> +EXTRA_CFLAGS += -DCONFIG_RTW_ADAPTIVITY_MODE=0
> +else ifeq ($(CONFIG_RTW_ADAPTIVITY_MODE), carrier_sense)
> +EXTRA_CFLAGS += -DCONFIG_RTW_ADAPTIVITY_MODE=1
> +endif
> +
> +ifeq ($(CONFIG_SIGNAL_SCALE_MAPPING), y)
> +EXTRA_CFLAGS += -DCONFIG_SIGNAL_SCALE_MAPPING
> +endif
> +
> +ifeq ($(CONFIG_80211W), y)
> +EXTRA_CFLAGS += -DCONFIG_IEEE80211W
> +endif
> +
> +ifeq ($(CONFIG_WOWLAN), y)
> +EXTRA_CFLAGS += -DCONFIG_WOWLAN
> +ifeq ($(CONFIG_DEFAULT_PATTERNS_EN), y)
> +EXTRA_CFLAGS += -DCONFIG_DEFAULT_PATTERNS_EN
> +endif
> +endif
> +
> +ifeq ($(CONFIG_AP_WOWLAN), y)
> +EXTRA_CFLAGS += -DCONFIG_AP_WOWLAN
> +endif
> +
> +ifeq ($(CONFIG_PNO_SUPPORT), y)
> +EXTRA_CFLAGS += -DCONFIG_PNO_SUPPORT
> +ifeq ($(CONFIG_PNO_SET_DEBUG), y)
> +EXTRA_CFLAGS += -DCONFIG_PNO_SET_DEBUG
> +endif
> +endif
> +
> +ifeq ($(CONFIG_GPIO_WAKEUP), y)
> +EXTRA_CFLAGS += -DCONFIG_GPIO_WAKEUP
> +ifeq ($(CONFIG_HIGH_ACTIVE), y)
> +EXTRA_CFLAGS += -DHIGH_ACTIVE=1
> +else
> +EXTRA_CFLAGS += -DHIGH_ACTIVE=0
> +endif
> +endif
> +
> +ifneq ($(CONFIG_WAKEUP_GPIO_IDX), default)
> +EXTRA_CFLAGS += -DWAKEUP_GPIO_IDX=$(CONFIG_WAKEUP_GPIO_IDX)
> +endif
> +
> +ifeq ($(CONFIG_REDUCE_TX_CPU_LOADING), y)
> +EXTRA_CFLAGS += -DCONFIG_REDUCE_TX_CPU_LOADING
> +endif
> +
> +ifeq ($(CONFIG_BR_EXT), y)
> +BR_NAME = br0
> +EXTRA_CFLAGS += -DCONFIG_BR_EXT
> +EXTRA_CFLAGS += '-DCONFIG_BR_EXT_BRNAME="'$(BR_NAME)'"'
> +endif
> +
> +
> +ifeq ($(CONFIG_TDLS), y)
> +EXTRA_CFLAGS += -DCONFIG_TDLS
> +endif
> +
> +ifeq ($(CONFIG_WIFI_MONITOR), y)
> +EXTRA_CFLAGS += -DCONFIG_WIFI_MONITOR
> +endif
> +
> +ifeq ($(CONFIG_MCC_MODE), y)
> +EXTRA_CFLAGS += -DCONFIG_MCC_MODE
> +endif
> +
> +ifeq ($(CONFIG_RTW_NAPI), y)
> +EXTRA_CFLAGS += -DCONFIG_RTW_NAPI
> +endif
> +
> +ifeq ($(CONFIG_RTW_GRO), y)
> +EXTRA_CFLAGS += -DCONFIG_RTW_GRO
> +endif
> +
> +ifeq ($(CONFIG_MP_VHT_HW_TX_MODE), y)
> +EXTRA_CFLAGS += -DCONFIG_MP_VHT_HW_TX_MODE
> +ifeq ($(CONFIG_PLATFORM_I386_PC), y)
> +## For I386 X86 ToolChain use Hardware FLOATING
> +EXTRA_CFLAGS += -mhard-float
> +else
> +## For ARM ToolChain use Hardware FLOATING
> +EXTRA_CFLAGS += -mfloat-abi=hard
> +endif
> +endif
> +
> +ifeq ($(CONFIG_APPEND_VENDOR_IE_ENABLE), y)
> +EXTRA_CFLAGS += -DCONFIG_APPEND_VENDOR_IE_ENABLE
> +endif
> +
> +ifeq ($(CONFIG_RTW_DEBUG), y)
> +EXTRA_CFLAGS += -DCONFIG_RTW_DEBUG
> +EXTRA_CFLAGS += -DRTW_LOG_LEVEL=$(CONFIG_RTW_LOG_LEVEL)
> +endif
> +
> +EXTRA_CFLAGS += -DDM_ODM_SUPPORT_TYPE=0x04
> +
> +EXTRA_CFLAGS += -DRTW_USE_CFG80211_STA_EVENT
> +
> +SUBARCH := $(shell uname -m | sed -e "s/i.86/i386/; s/ppc.*/powerpc/; s/armv.l/arm/; s/aarch64/arm64/;")
> +ARCH ?= $(SUBARCH)
> +CROSS_COMPILE ?=
> +KVER  ?= $(if $(KERNELRELEASE),$(KERNELRELEASE),$(shell uname -r))
> +KSRC := /lib/modules/$(KVER)/build
> +MODDESTDIR := /lib/modules/$(KVER)/kernel/drivers/net/wireless/
> +INSTALL_PREFIX :=
> +
> +ifeq ($(CONFIG_MULTIDRV), y)
> +
> +
> +MODULE_NAME := rtw_usb
> +
> +endif
> +
> +USER_MODULE_NAME ?=
> +ifneq ($(USER_MODULE_NAME),)
> +MODULE_NAME := $(USER_MODULE_NAME)
> +endif
> +
> +ifneq ($(KERNELRELEASE),)
> +
> +rtk_core :=	core/rtw_cmd.o \
> +		core/rtw_security.o \
> +		core/rtw_debug.o \
> +		core/rtw_io.o \
> +		core/rtw_ioctl_query.o \
> +		core/rtw_ioctl_set.o \
> +		core/rtw_ieee80211.o \
> +		core/rtw_mlme.o \
> +		core/rtw_mlme_ext.o \
> +		core/rtw_mi.o \
> +		core/rtw_wlan_util.o \
> +		core/rtw_pwrctrl.o \
> +		core/rtw_rf.o \
> +		core/rtw_recv.o \
> +		core/rtw_sta_mgt.o \
> +		core/rtw_ap.o \
> +		core/rtw_xmit.o	\
> +		core/rtw_p2p.o \
> +		core/rtw_tdls.o \
> +		core/rtw_br_ext.o \
> +		core/rtw_iol.o \
> +		core/rtw_sreset.o \
> +		core/rtw_btcoex_wifionly.o \
> +		core/rtw_btcoex.o \
> +		core/rtw_beamforming.o \
> +		core/rtw_odm.o \
> +		core/rtw_efuse.o 
> +
> +r8188eu-y += $(rtk_core)
> +
> +r8188eu-$(CONFIG_INTEL_WIDI) += core/rtw_intel_widi.o
> +
> +r8188eu-$(CONFIG_WAPI_SUPPORT) += core/rtw_wapi.o	\
> +					core/rtw_wapi_sms4.o
> +
> +r8188eu-y += $(_OS_INTFS_FILES)
> +r8188eu-y += $(_HAL_INTFS_FILES)
> +r8188eu-y += $(_OUTSRC_FILES)
> +
> +r8188eu-$(CONFIG_MP_INCLUDED) += core/rtw_mp.o
> +
> +ifeq ($(CONFIG_RTL8723B), y)
> +r8188eu-$(CONFIG_MP_INCLUDED)+= core/rtw_bt_mp.o
> +endif
> +
> +obj-m := r8188eu.o

The makefile should stop here, below this is for when this was a
stand-alone repo.  Just drop them.

> +
> +else
> +
> +all: test modules
> +
> +test:
> +	@if [ !  -e  ./.git ] ; then echo $(MSG); exit 1; fi;
> +
> +modules:
> +	$(MAKE) ARCH=$(ARCH) CROSS_COMPILE=$(CROSS_COMPILE) -C $(KSRC) M=$(CURDIR)  modules
> +
> +strip:
> +	$(CROSS_COMPILE)strip r8188eu.ko --strip-unneeded
> +
> +install:
> +	install -p -m 644 r8188eu.ko  $(MODDESTDIR)
> +	/sbin/depmod -a ${KVER}
> +
> +uninstall:
> +	rm -f $(MODDESTDIR)/r8188eu.ko
> +	/sbin/depmod -a ${KVER}
> +
> +config_r:
> +	@echo "make config"
> +	/bin/bash script/Configure script/config.in
> +
> +
> +.PHONY: modules clean
> +
> +clean:
> +	#$(MAKE) -C $(KSRC) M=$(CURDIR) clean
> +	cd hal ; rm -fr */*/*/*.mod.c */*/*/*.mod */*/*/*.o */*/*/.*.cmd */*/*/*.ko
> +	cd hal ; rm -fr */*/*.mod.c */*/*.mod */*/*.o */*/.*.cmd */*/*.ko
> +	cd hal ; rm -fr */*.mod.c */*.mod */*.o */.*.cmd */*.ko
> +	cd hal/led ; rm -fr *.mod.c *.mod *.o .*.cmd *.ko .*.cmd
> +	cd core ; rm -fr *.mod.c *.mod *.o .*.cmd *.ko
> +	cd os_dep/linux ; rm -fr *.mod.c *.mod *.o .*.cmd *.ko
> +	cd os_dep ; rm -fr *.mod.c *.mod *.o .*.cmd *.ko
> +	cd platform ; rm -fr *.mod.c *.mod *.o .*.cmd *.ko
> +	rm -fr Module.symvers ; rm -fr Module.markers ; rm -fr modules.order
> +	rm -fr *.mod.c *.mod *.o .*.cmd *.ko *~
> +	rm -fr .tmp_versions
> +endif

thanks,

greg k-h

Powered by blists - more mailing lists