| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <CA+G9fYt_9nfDcQzKm8SZtmQXzzrybutS9vD4GgUw_0o8UD1HOQ@mail.gmail.com>
Date: Fri, 23 Jul 2021 17:26:22 +0530
From: Naresh Kamboju <naresh.kamboju@...aro.org>
To: Greg Kroah-Hartman <gregkh@...uxfoundation.org>
Cc: open list <linux-kernel@...r.kernel.org>,
Linus Torvalds <torvalds@...ux-foundation.org>,
Andrew Morton <akpm@...ux-foundation.org>,
Guenter Roeck <linux@...ck-us.net>,
Shuah Khan <shuah@...nel.org>, patches@...nelci.org,
lkft-triage@...ts.linaro.org, Pavel Machek <pavel@...x.de>,
Jon Hunter <jonathanh@...dia.com>,
Florian Fainelli <f.fainelli@...il.com>,
linux-stable <stable@...r.kernel.org>,
linux-block <linux-block@...r.kernel.org>,
linux-fsdevel@...r.kernel.org, LTP List <ltp@...ts.linux.it>,
Arnd Bergmann <arnd@...db.de>
Subject: Re: [PATCH 5.13 000/156] 5.13.5-rc1 review
On Thu, 22 Jul 2021 at 22:17, Greg Kroah-Hartman
<gregkh@...uxfoundation.org> wrote:
>
> This is the start of the stable review cycle for the 5.13.5 release.
> There are 156 patches in this series, all will be posted as a response
> to this one. If anyone has any issues with these being applied, please
> let me know.
>
> Responses should be made by Sat, 24 Jul 2021 15:56:00 +0000.
> Anything received after that time might be too late.
>
> The whole patch series can be found in one patch at:
> https://www.kernel.org/pub/linux/kernel/v5.x/stable-review/patch-5.13.5-rc1.gz
> or in the git tree and branch at:
> git://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git linux-5.13.y
> and the diffstat can be found below.
>
> thanks,
>
> greg k-h
The following error is due to SATA drive format failing with arm64 64k-page
size ( CONFIG_ARM64_64K_PAGES=y ) kernel.
while running LTP syscalls test suite on running 5.13.3 and 5.13.5-rc1 kernel.
First it was noticed on the stable-rc 5.13.3-rc2 kernel.
Whereas 64bit kernel and 32bit kernel pass with 4K page size.
Initially, I thought it could be a Hard drive fault but it is reproducible on
other devices but not always. Which is a blocker to bisect the problem.
The steps to reproduce:
- Boot arm64 juno device with 64k page stable-rc 5.13 kernel Image [1]
- CONFIG_ARM64_64K_PAGES=y
- format connected SATA drives and mount /scratch
- Use the mounted /scratch for LTP runs to create and delete files from this
- cd /opt/ltp
- ./runltp -d /scratch -f syscalls
error log:
-------------
tst_device.c:89: TINFO: Found free device 0 '/dev/loop0'
tst_test.c:889: TINFO: Formatting /dev/loop0 with ext2 opts='' extra opts=''
mke2fs 1.43.8 (1-Jan-2018)
[ 776.850122] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 0)
[ 776.874645] ata1.00: configured for UDMA/100
[ 776.879042] ata1: EH complete
[ 776.912010] ata1.00: exception Emask 0x20 SAct 0xc0 SErr 0x0 action
0x6 frozen
[ 776.919299] ata1.00: irq_stat 0x00020002, PCI target abort while
transferring data
[ 776.926983] ata1.00: failed command: WRITE FPDMA QUEUED
[ 776.932263] ata1.00: cmd 61/08:30:00:10:84/00:00:06:00:00/40 tag 6
ncq dma 4096 out
[ 776.932263] res e6/ff:00:00:00:00/00:00:00:00:e6/00 Emask
0x22 (host bus error)
[ 776.948089] ata1.00: status: { Busy }
[ 776.951766] ata1.00: error: { ICRC UNC AMNF IDNF ABRT }
[ 776.957042] ata1.00: failed command: WRITE FPDMA QUEUED
[ 776.962311] ata1.00: cmd 61/10:38:a8:6f:c4/00:00:06:00:00/40 tag 7
ncq dma 8192 out
[ 776.962311] res e7/ff:00:00:00:00/00:00:00:00:e7/00 Emask
0x22 (host bus error)
[ 776.978139] ata1.00: status: { Busy }
[ 776.981843] ata1.00: error: { ICRC UNC AMNF IDNF ABRT }
[ 776.987128] ata1: hard resetting link
[ 779.158340] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 0)
[ 779.182864] ata1.00: configured for UDMA/100
[ 779.187307] ata1: EH complete
[ 779.204050] ata1.00: exception Emask 0x20 SAct 0x9000000 SErr 0x0
action 0x6 frozen
[ 779.211764] ata1.00: irq_stat 0x00020002, PCI target abort while
transferring data
[ 779.219433] ata1.00: failed command: WRITE FPDMA QUEUED
[ 779.224749] ata1.00: cmd 61/10:c0:a8:6f:c4/00:00:06:00:00/40 tag 24
ncq dma 8192 out
[ 779.224749] res f8/ff:00:00:00:00/00:00:00:00:f8/00 Emask
0x22 (host bus error)
[ 779.240718] ata1.00: status: { Busy }
[ 779.244430] ata1.00: error: { ICRC UNC AMNF IDNF ABRT }
[ 779.249747] ata1.00: failed command: WRITE FPDMA QUEUED
[ 779.255146] ata1.00: cmd 61/08:d8:00:10:84/00:00:06:00:00/40 tag 27
ncq dma 4096 out
[ 779.255146] res fb/ff:00:00:00:00/00:00:00:00:fb/00 Emask
0x22 (host bus error)
[ 779.271056] ata1.00: status: { Busy }
[ 779.274740] ata1.00: error: { ICRC UNC AMNF IDNF ABRT }
[ 779.280000] ata1: hard resetting link
[ 781.450339] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 0)
[ 781.474959] ata1.00: configured for UDMA/100
[ 781.479351] ata1: EH complete
[ 781.496155] ata1.00: NCQ disabled due to excessive errors
[ 781.501604] ata1.00: exception Emask 0x20 SAct 0x300 SErr 0x0
action 0x6 frozen
[ 781.508957] ata1.00: irq_stat 0x00020002, PCI target abort while
transferring data
[ 781.516561] ata1.00: failed command: WRITE FPDMA QUEUED
[ 781.521812] ata1.00: cmd 61/10:40:a8:6f:c4/00:00:06:00:00/40 tag 8
ncq dma 8192 out
[ 781.521812] res e8/ff:00:00:00:00/00:00:00:00:e8/00 Emask
0x22 (host bus error)
[ 781.537607] ata1.00: status: { Busy }
[ 781.541287] ata1.00: error: { ICRC UNC AMNF IDNF ABRT }
[ 781.546547] ata1.00: failed command: WRITE FPDMA QUEUED
[ 781.551796] ata1.00: cmd 61/08:48:00:10:84/00:00:06:00:00/40 tag 9
ncq dma 4096 out
[ 781.551796] res e9/ff:00:00:00:00/00:00:00:00:e9/00 Emask
0x22 (host bus error)
[ 781.567587] ata1.00: status: { Busy }
[ 781.571270] ata1.00: error: { ICRC UNC AMNF IDNF ABRT }
[ 781.576528] ata1: hard resetting link
[ 783.750335] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 0)
[ 783.774957] ata1.00: configured for UDMA/100
[ 783.779349] ata1: EH complete
[ 783.796099] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen
[ 783.803199] ata1.00: irq_stat 0x00020002, PCI target abort while
transferring data
[ 783.810812] ata1.00: failed command: WRITE DMA
[ 783.815281] ata1.00: cmd ca/00:10:a8:6f:c4/00:00:00:00:00/e6 tag 11
dma 8192 out
[ 783.815281] res eb/ff:00:00:00:00/00:00:00:00:eb/00 Emask
0x22 (host bus error)
[ 783.830815] ata1.00: status: { Busy }
[ 783.834497] ata1.00: error: { ICRC UNC AMNF IDNF ABRT }
<>
move_mount01.c:70: TPASS: Flag MO[ 844.176510] EXT4-fs (loop0):
mounting ext3 file system using the ext4 subsystem
VE_MOUNT_F_AUTOMOUNTS: move_mount() passed
[ 844.194668] EXT4-fs (loop0): mounted filesystem with ordered data
mode. Opts: (null). Quota mode: none.
[ 844.236136] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen
[ 844.243226] ata1.00: irq_stat 0x00020002, PCI target abort while
transferring data
[ 844.250836] ata1.00: failed command: WRITE DMA
[ 844.255310] ata1.00: cmd ca/00:10:a8:98:c4/00:00:00:00:00/e6 tag 19
dma 8192 out
[ 844.255310] res f3/ff:00:00:00:00/00:00:00:00:f3/00 Emask
0x22 (host bus error)
[ 844.270844] ata1.00: status: { Busy }
[ 844.274536] ata1.00: error: { ICRC UNC AMNF IDNF ABRT }
[ 844.279797] ata1: hard resetting link
[ 846.450150] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 0)
[ 846.474681] ata1.00: configured for UDMA/100
[ 846.479031] ata1: EH complete
[ 846.500082] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen
[ 846.507202] ata1.00: irq_stat 0x00020002, PCI target abort while
transferring data
[ 846.514840] ata1.00: failed command: WRITE DMA
[ 846.519314] ata1.00: cmd ca/00:10:a8:98:c4/00:00:00:00:00/e6 tag 19
dma 8192 out
[ 846.519314] res f3/ff:00:00:00:00/00:00:00:00:f3/00 Emask
0x22 (host bus error)
[ 846.534870] ata1.00: status: { Busy }
[ 846.538563] ata1.00: error: { ICRC UNC AMNF IDNF ABRT }
[ 846.543874] ata1: hard resetting link
[ 848.717983] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 0)
[ 848.742568] ata1.00: configured for UDMA/100
[ 848.746902] ata1: EH complete
[ 848.768079] ata1: limiting SATA link speed to 1.5 Gbps
[ 848.773279] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen
[ 848.780390] ata1.00: irq_stat 0x00020002, PCI target abort while
transferring data
[ 848.788015] ata1.00: failed command: WRITE DMA
[ 848.792493] ata1.00: cmd ca/00:10:a8:98:c4/00:00:00:00:00/e6 tag 17
dma 8192 out
[ 848.792493] res f1/ff:00:00:00:00/00:00:00:00:f1/00 Emask
0x22 (host bus error)
[ 848.808062] ata1.00: status: { Busy }
[ 848.811731] ata1.00: error: { ICRC UNC AMNF IDNF ABRT }
[ 848.817013] ata1: hard resetting link
[ 850.989969] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 10)
[ 856.023974] ata1.00: qc timeout (cmd 0xec)
[ 856.028112] ata1.00: failed to IDENTIFY (I/O error, err_mask=0x5)
[ 856.034231] ata1.00: revalidation failed (errno=-5)
[ 856.039143] ata1: hard resetting link
[ 858.210059] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 10)
[ 858.234811] ata1.00: configured for UDMA/100
[ 858.239135] ata1: EH complete
[ 858.260066] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen
[ 858.267172] ata1.00: irq_stat 0x00020002, PCI target abort while
transferring data
[ 858.274799] ata1.00: failed command: WRITE DMA
[ 858.279271] ata1.00: cmd ca/00:10:a8:98:c4/00:00:00:00:00/e6 tag 16
dma 8192 out
[ 858.279271] res f0/ff:00:00:00:00/00:00:00:00:f0/00 Emask
0x22 (host bus error)
[ 858.294825] ata1.00: status: { Busy }
[ 858.298519] ata1.00: error: { ICRC UNC AMNF IDNF ABRT }
[ 858.303799] ata1: hard resetting link
[ 860.473957] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 10)
[ 865.495874] ata1.00: qc timeout (cmd 0xec)
[ 865.500007] ata1.00: failed to IDENTIFY (I/O error, err_mask=0x5)
[ 865.506145] ata1.00: revalidation failed (errno=-5)
[ 865.511061] ata1: hard resetting link
[ 867.681960] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 10)
[ 867.706586] ata1.00: configured for UDMA/100
[ 867.710921] ata1: EH complete
[ 867.755977] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen
[ 867.763068] ata1.00: irq_stat 0x00020002, PCI target abort while
transferring data
[ 867.770697] ata1.00: failed command: WRITE DMA
[ 867.775176] ata1.00: cmd ca/00:10:c0:98:c4/00:00:00:00:00/e6 tag 17
dma 8192 out
[ 867.775176] res f1/ff:00:00:00:00/00:00:00:00:f1/00 Emask
0x22 (host bus error)
[ 867.790712] ata1.00: status: { Busy }
[ 867.794397] ata1.00: error: { ICRC UNC AMNF IDNF ABRT }
[ 867.799653] ata1: hard resetting link
[ 869.970127] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 10)
[ 875.224033] ata1.00: qc timeout (cmd 0xec)
[ 875.228193] ata1.00: failed to IDENTIFY (I/O error, err_mask=0x5)
[ 875.234314] ata1.00: revalidation failed (errno=-5)
[ 875.239227] ata1: hard resetting link
[ 877.410117] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 10)
[ 877.434747] ata1.00: configured for UDMA/100
[ 877.439076] ata1: EH complete
[ 877.463959] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen
[ 877.471050] ata1.00: irq_stat 0x00020002, PCI target abort while
transferring data
[ 877.478680] ata1.00: failed command: WRITE DMA
[ 877.483158] ata1.00: cmd ca/00:10:c0:98:c4/00:00:00:00:00/e6 tag 19
dma 8192 out
[ 877.483158] res f3/ff:00:00:00:00/00:00:00:00:f3/00 Emask
0x22 (host bus error)
[ 877.498731] ata1.00: status: { Busy }
[ 877.502425] ata1.00: error: { ICRC UNC AMNF IDNF ABRT }
[ 877.507705] ata1: hard resetting link
[ 879.677937] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 10)
[ 884.695839] ata1.00: qc timeout (cmd 0xec)
[ 884.699994] ata1.00: failed to IDENTIFY (I/O error, err_mask=0x5)
[ 884.706114] ata1.00: revalidation failed (errno=-5)
[ 884.711046] ata1: hard resetting link
[ 886.881932] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 10)
[ 886.906633] ata1.00: configured for UDMA/100
[ 886.910979] ata1: EH complete
[ 886.932038] ata1.00: limiting speed to UDMA/66:PIO4
[ 886.936980] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen
[ 886.944092] ata1.00: irq_stat 0x00020002, PCI target abort while
transferring data
[ 886.951703] ata1.00: failed command: WRITE DMA
[ 886.956193] ata1.00: cmd ca/00:10:c0:98:c4/00:00:00:00:00/e6 tag 19
dma 8192 out
[ 886.956193] res f3/ff:00:00:00:00/00:00:00:00:f3/00 Emask
0x22 (host bus error)
[ 886.971753] ata1.00: status: { Busy }
[ 886.975461] ata1.00: error: { ICRC UNC AMNF IDNF ABRT }
[ 886.980745] ata1: hard resetting link
[ 889.153927] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 10)
[ 894.167843] ata1.00: qc timeout (cmd 0xec)
[ 894.171975] ata1.00: failed to IDENTIFY (I/O error, err_mask=0x5)
[ 894.178115] ata1.00: revalidation failed (errno=-5)
[ 894.183032] ata1: hard resetting link
[ 896.353928] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 10)
[ 896.378602] ata1.00: configured for UDMA/66
[ 896.382850] ata1: EH complete
[ 896.404020] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen
[ 896.411126] ata1.00: irq_stat 0x00020002, PCI target abort while
transferring data
[ 896.418751] ata1.00: failed command: WRITE DMA
[ 896.423222] ata1.00: cmd ca/00:10:c0:98:c4/00:00:00:00:00/e6 tag 19
dma 8192 out
[ 896.423222] res f3/ff:00:00:00:00/00:00:00:00:f3/00 Emask
0x22 (host bus error)
[ 896.438775] ata1.00: status: { Busy }
[ 896.442468] ata1.00: error: { ICRC UNC AMNF IDNF ABRT }
[ 896.447747] ata1: hard resetting link
[ 898.618002] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 10)
[ 903.639915] ata1.00: qc timeout (cmd 0xec)
[ 903.644051] ata1.00: failed to IDENTIFY (I/O error, err_mask=0x5)
[ 903.650170] ata1.00: revalidation failed (errno=-5)
[ 903.655077] ata1: hard resetting link
[ 905.826132] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 10)
[ 905.850829] ata1.00: configured for UDMA/66
[ 905.855065] ata1: EH complete
[ 905.872021] ata1.00: limiting speed to UDMA/33:PIO4
[ 905.876930] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen
[ 905.884010] ata1.00: irq_stat 0x00020002, PCI target abort while
transferring data
[ 905.891610] ata1.00: failed command: WRITE DMA
[ 905.896074] ata1.00: cmd ca/00:10:c0:98:c4/00:00:00:00:00/e6 tag 19
dma 8192 out
[ 905.896074] res f3/ff:00:00:00:00/00:00:00:00:f3/00 Emask
0x22 (host bus error)
[ 905.911604] ata1.00: status: { Busy }
[ 905.915284] ata1.00: error: { ICRC UNC AMNF IDNF ABRT }
[ 905.920538] ata1: hard resetting link
[ 908.102004] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 10)
[ 913.111903] ata1.00: qc timeout (cmd 0xec)
[ 913.116038] ata1.00: failed to IDENTIFY (I/O error, err_mask=0x5)
[ 913.122158] ata1.00: revalidation failed (errno=-5)
[ 913.127078] ata1: hard resetting link
[ 915.297988] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 10)
[ 915.322600] ata1.00: configured for UDMA/33
[ 915.326836] ata1: EH complete
[ 915.348105] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen
[ 915.355207] ata1.00: irq_stat 0x00020002, PCI target abort while
transferring data
[ 915.362815] ata1.00: failed command: WRITE DMA
[ 915.367279] ata1.00: cmd ca/00:10:c0:98:c4/00:00:00:00:00/e6 tag 20
dma 8192 out
[ 915.367279] res f4/ff:00:00:00:00/00:00:00:00:f4/00 Emask
0x22 (host bus error)
[ 915.382810] ata1.00: status: { Busy }
[ 915.386491] ata1.00: error: { ICRC UNC AMNF IDNF ABRT }
[ 915.391744] ata1: hard resetting link
[ 917.561987] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 10)
[ 922.583901] ata1.00: qc timeout (cmd 0xec)
[ 922.588049] ata1.00: failed to IDENTIFY (I/O error, err_mask=0x5)
[ 922.594169] ata1.00: revalidation failed (errno=-5)
[ 922.599081] ata1: hard resetting link
[ 924.769981] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 10)
[ 924.794681] ata1.00: configured for UDMA/33
[ 924.798927] sd 0:0:0:0: [sda] tag#20 UNKNOWN(0x2003) Result:
hostbyte=0x00 driverbyte=0x08 cmd_age=57s
[ 924.808281] sd 0:0:0:0: [sda] tag#20 Sense Key : 0xb [current]
[ 924.814231] sd 0:0:0:0: [sda] tag#20 ASC=0x47 ASCQ=0x0
[ 924.819483] sd 0:0:0:0: [sda] tag#20 CDB: opcode=0x2a 2a 00 06 c4
98 c0 00 00 10 00
[ 924.827169] blk_update_request: I/O error, dev sda, sector
113547456 op 0x1:(WRITE) flags 0x800 phys_seg 2 prio class 0
[ 924.838018] Aborting journal on device sda-8.
[ 924.838036] ata1: EH complete
[ 924.846735] blk_update_request: I/O error, dev loop0, sector 2 op
0x1:(WRITE) flags 0x800 phys_seg 1 prio class 0
[ 924.857024] Buffer I/O error on dev loop0, logical block 1, lost
sync page write
[ 924.864473] EXT4-fs (loop0): I/O error while writing superblock
move_mount01.c:70: TPASS: Flag MO[ 924.884049] EXT4-fs error (device
sda): ext4_journal_check_start:83: comm loop0: Detected aborted
journal
VE_MOUNT_F_EMPTY_PATH: move_moun[ 924.897412] EXT4-fs (sda):
Remounting filesystem read-only
t() passed
[ 924.904884] EXT4-fs (loop0): mounting ext3 file system using the
ext4 subsystem
[ 924.915569] loop: Write error at byte offset 1024, length 1024.
[ 924.921550] blk_update_request: I/O error, dev loop0, sector 2 op
0x1:(WRITE) flags 0x800 phys_seg 1 prio class 0
[ 924.931855] blk_update_request: I/O error, dev loop0, sector 2 op
0x1:(WRITE) flags 0x800 phys_seg 1 prio class 0
[ 924.942137] Buffer I/O error on dev loop0, logical block 1, lost
sync page write
[ 924.949612] EXT4-fs (loop0): I/O error while writing superblock
[ 924.955578] EXT4-fs (loop0): mount failed
move_mount01.c:47: TFAIL: fsconfi[ 924.992560] EXT4-fs (loop0):
mounting ext3 file system using the ext4 subsystem
g(FSCONFIG_CMD_CREATE) failed: EIO (5)
[ 925.004493] loop: Write error at byte offset 1024, length 1024.
[ 925.011723] blk_update_request: I/O error, dev loop0, sector 2 op
0x1:(WRITE) flags 0x800 phys_seg 1 prio class 0
[ 925.022022] blk_update_request: I/O error, dev loop0, sector 2 op
0x1:(WRITE) flags 0x800 phys_seg 1 prio class 0
[ 925.032305] Buffer I/O error on dev loop0, logical block 1, lost
sync page write
[ 925.039771] EXT4-fs (loop0): I/O error while writing superblock
[ 925.045757] EXT4-fs (loop0): mount failed
move_mount01.c:47: TFAIL: fsconfi[ 925.064332] EXT4-fs (loop0):
mounting ext3 file system using the ext4 subsystem
g(FSCONFIG_CMD_CREATE) failed: EIO (5)
[ 925.076587] loop: Write error at byte offset 1024, length 1024.
[ 925.083805] blk_update_request: I/O error, dev loop0, sector 2 op
0x1:(WRITE) flags 0x800 phys_seg 1 prio class 0
[ 925.094103] blk_update_request: I/O error, dev loop0, sector 2 op
0x1:(WRITE) flags 0x800 phys_seg 1 prio class 0
[ 925.104386] Buffer I/O error on dev loop0, logical block 1, lost
sync page write
[ 925.111838] EXT4-fs (loop0): I/O error while writing superblock
[ 925.117801] EXT4-fs (loop0): mount failed
move_mount01.c:47: TFAIL: fsconfig(FSCONFIG_CMD_CREATE) failed: EIO (5)
tst_test.c:1379: TINFO: Testing on ext4
[ 925.148096] loop: Write error at byte offset 0, length 65536.
[ 925.155817] loop: Write error at byte offset 65536, length 65536.
[ 925.162008] loop: Write error at byte offset 131072, length 65536.
[ 925.168265] blk_update_request: I/O error, dev loop0, sector 0 op
0x1:(WRITE) flags 0x800 phys_seg 1 prio class 0
[ 925.168320] loop: Write error at byte offset 196608, length 65536.
[ 925.178583] Buffer I/O error on dev loop0, logical block 0, lost
async page write
[ 925.178641] blk_update_request: I/O error, dev loop0, sector 128 op
0x1:(WRITE) flags 0x800 phys_seg 1 prio class 0
[ 925.184810] loop: Write error at byte offset 262144, length 65536.
[ 925.192314] Buffer I/O error on dev loop0, logical block 1, lost
async page write
[ 925.216549] loop: Write error at byte offset 327680, length 65536.
[ 925.216555] Buffer I/O error on dev loop0, logical block 4, lost
async page write
[ 925.216567] Buffer I/O error on dev loop0, logical block 2, lost
async page write
[ 925.216620] Buffer I/O error on dev loop0, logical block 3, lost
async page write
[ 925.222854] loop: Write error at byte offset 393216, length 65536.
[ 925.230315] Buffer I/O error on dev loop0, logical block 5, lost
async page write
tst_test.c:889: TINFO: Formatting /dev/loop0 with ext4 opts='' extra opts=''
mke2fs 1.43.8 (1-Jan-2018)
Warning, had trouble writing out superblocks.
tst_test.c:889: TBROK: mkfs.ext4 failed with exit code 5
tst_tmpdir.c:337: TWARN: tst_rmdir:
rmobj(/scratch/ltp-TGrC0Kijpg/Nyirgt) failed:
remove(/scratch/ltp-TGrC0Kijpg/Nyirgt/mntpoint) failed; errno=30:
EROFS
Summary:
passed 9
failed 3
broken 1
skipped 0
warnings 0
tst_tmpdir.c:271: TBROK: tst_tmpdir:
mkdtemp(/scratch/ltp-TGrC0Kijpg/OXQGCk) failed: EROFS (30)
Reported-by: Linux Kernel Functional Testing <lkft@...aro.org>
Full test logs,
https://lkft.validation.linaro.org/scheduler/job/3097379#L9811
https://lkft.validation.linaro.org/scheduler/job/3146329#L7071
metadata:
git branch: linux-5.13.y
git repo: https://gitlab.com/Linaro/lkft/mirrors/stable/linux-stable-rc
git commit: 80f75a7443c5c9a01f54e3df71ccd23d13c70c44
git describe: v5.13.3-508-g80f75a7443c5
make_kernelversion: 5.13.5-rc1
kernel-config: https://builds.tuxbuild.com/1vg96dRUTrTU7nl6sWV2iwTwnu5/config
vmlinux: https://builds.tuxbuild.com/1vg96dRUTrTU7nl6sWV2iwTwnu5/vmlinux.xz
System.map: https://builds.tuxbuild.com/1vg96dRUTrTU7nl6sWV2iwTwnu5/System.map
[1] kernel Image:
https://builds.tuxbuild.com/1vg96dRUTrTU7nl6sWV2iwTwnu5/Image.gz
--
Linaro LKFT
https://lkft.linaro.org
Powered by blists - more mailing lists