| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-Id: <20210726073518.2167398-6-s.riedmueller@phytec.de>
Date: Mon, 26 Jul 2021 09:35:17 +0200
From: Stefan Riedmueller <s.riedmueller@...tec.de>
To: Laurent Pinchart <laurent.pinchart@...asonboard.com>,
Mauro Carvalho Chehab <mchehab@...nel.org>,
Rob Herring <robh+dt@...nel.org>
Cc: Stefan Riedmueller <s.riedmueller@...tec.de>,
Sakari Ailus <sakari.ailus@...ux.intel.com>,
linux-media@...r.kernel.org, devicetree@...r.kernel.org,
linux-kernel@...r.kernel.org
Subject: [PATCH v7 5/6] media: dt-bindings: mt9p031: Convert bindings to yaml
Convert mt9p031 sensor bindings to yaml schema. Also update the
MAINTAINERS entry.
Although input-clock-frequency and pixel-clock-frequency have not been
definded as endpoint propierties in the textual bindings, the sensor
does parse them from the endpoint. Thus move these properties to the
endpoint in the new yaml bindings.
Signed-off-by: Stefan Riedmueller <s.riedmueller@...tec.de>
---
.../bindings/media/i2c/aptina,mt9p031.yaml | 86 +++++++++++++++++++
.../devicetree/bindings/media/i2c/mt9p031.txt | 40 ---------
MAINTAINERS | 1 +
3 files changed, 87 insertions(+), 40 deletions(-)
create mode 100644 Documentation/devicetree/bindings/media/i2c/aptina,mt9p031.yaml
delete mode 100644 Documentation/devicetree/bindings/media/i2c/mt9p031.txt
diff --git a/Documentation/devicetree/bindings/media/i2c/aptina,mt9p031.yaml b/Documentation/devicetree/bindings/media/i2c/aptina,mt9p031.yaml
new file mode 100644
index 000000000000..bc0e8e5194e8
--- /dev/null
+++ b/Documentation/devicetree/bindings/media/i2c/aptina,mt9p031.yaml
@@ -0,0 +1,86 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/media/i2c/aptina,mt9p031.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Aptina 1/2.5-Inch 5Mp CMOS Digital Image Sensor
+
+maintainers:
+ - Laurent Pinchart <laurent.pinchart@...asonboard.com>
+
+description: |
+ The Aptina MT9P031 is a 1/2.5-inch CMOS active pixel digital image sensor
+ with an active array size of 2592H x 1944V. It is programmable through a
+ simple two-wire serial interface.
+
+properties:
+ compatible:
+ enum:
+ - aptina,mt9p031
+ - aptina,mt9p031m
+
+ reg:
+ description: I2C device address
+ maxItems: 1
+
+ reset-gpios:
+ maxItems: 1
+ description: Chip reset GPIO
+
+ port:
+ $ref: /schemas/graph.yaml#/$defs/port-base
+ additionalProperties: false
+
+ properties:
+ endpoint:
+ $ref: /schemas/media/video-interfaces.yaml#
+ unevaluatedProperties: false
+
+ properties:
+ input-clock-frequency:
+ $ref: /schemas/types.yaml#/definitions/uint32
+ minimum: 6000000
+ maximum: 96000000
+ description: Input clock frequency
+
+ pixel-clock-frequency:
+ $ref: /schemas/types.yaml#/definitions/uint32
+ maximum: 96000000
+ description: Target pixel clock frequency
+
+ pclk-sample:
+ default: 0
+
+ required:
+ - input-clock-frequency
+ - pixel-clock-frequency
+
+required:
+ - compatible
+ - reg
+ - port
+
+additionalProperties: false
+
+examples:
+ - |
+ i2c0 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ mt9p031@5d {
+ compatible = "aptina,mt9p031";
+ reg = <0x5d>;
+ reset-gpios = <&gpio_sensor 0 0>;
+
+ port {
+ mt9p031_1: endpoint {
+ input-clock-frequency = <6000000>;
+ pixel-clock-frequency = <96000000>;
+ };
+ };
+ };
+ };
+
+...
diff --git a/Documentation/devicetree/bindings/media/i2c/mt9p031.txt b/Documentation/devicetree/bindings/media/i2c/mt9p031.txt
deleted file mode 100644
index cb60443ff78f..000000000000
--- a/Documentation/devicetree/bindings/media/i2c/mt9p031.txt
+++ /dev/null
@@ -1,40 +0,0 @@
-* Aptina 1/2.5-Inch 5Mp CMOS Digital Image Sensor
-
-The Aptina MT9P031 is a 1/2.5-inch CMOS active pixel digital image sensor with
-an active array size of 2592H x 1944V. It is programmable through a simple
-two-wire serial interface.
-
-Required Properties:
-- compatible: value should be either one among the following
- (a) "aptina,mt9p031" for mt9p031 sensor
- (b) "aptina,mt9p031m" for mt9p031m sensor
-
-- input-clock-frequency: Input clock frequency.
-
-- pixel-clock-frequency: Pixel clock frequency.
-
-Optional Properties:
-- reset-gpios: Chip reset GPIO
-
-For further reading on port node refer to
-Documentation/devicetree/bindings/media/video-interfaces.txt.
-
-Example:
-
- i2c0@...2000 {
- ...
- ...
- mt9p031@5d {
- compatible = "aptina,mt9p031";
- reg = <0x5d>;
- reset-gpios = <&gpio3 30 0>;
-
- port {
- mt9p031_1: endpoint {
- input-clock-frequency = <6000000>;
- pixel-clock-frequency = <96000000>;
- };
- };
- };
- ...
- };
diff --git a/MAINTAINERS b/MAINTAINERS
index 19135a9d778e..e050790c846a 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -12637,6 +12637,7 @@ M: Laurent Pinchart <laurent.pinchart@...asonboard.com>
L: linux-media@...r.kernel.org
S: Maintained
T: git git://linuxtv.org/media_tree.git
+F: Documentation/devicetree/bindings/media/i2c/aptina,mt9p031.yaml
F: drivers/media/i2c/mt9p031.c
F: include/media/i2c/mt9p031.h
--
2.25.1
Powered by blists - more mailing lists