[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <48116849-8a76-7048-2d71-9a2853db94b5@baylibre.com>
Date: Mon, 26 Jul 2021 10:00:08 +0200
From: Neil Armstrong <narmstrong@...libre.com>
To: Martin Blumenstingl <martin.blumenstingl@...glemail.com>,
linux-amlogic@...ts.infradead.org
Cc: khilman@...libre.com, linux-arm-kernel@...ts.infradead.org,
linux-kernel@...r.kernel.org
Subject: Re: [PATCH v2 1/2] ARM: dts: meson: Add the AIU audio controller
On 18/07/2021 01:30, Martin Blumenstingl wrote:
> Add the AIU audio controller to the Amlogic Meson6/8/8b/8m2 SoC DT. This
> provides I2S and SPDIF outputs as well as codec glues for the internal
> HDMI controller.
> Also add the clock inputs and pin mux definitions on Meson8/8b/8m2. On
> Meson6 this is omitted because we neither have a clock nor pin
> controller node there yet.
>
> Signed-off-by: Martin Blumenstingl <martin.blumenstingl@...glemail.com>
> ---
> arch/arm/boot/dts/meson.dtsi | 12 +++++++
> arch/arm/boot/dts/meson8.dtsi | 63 ++++++++++++++++++++++++++++++++++
> arch/arm/boot/dts/meson8b.dtsi | 63 ++++++++++++++++++++++++++++++++++
> 3 files changed, 138 insertions(+)
>
> diff --git a/arch/arm/boot/dts/meson.dtsi b/arch/arm/boot/dts/meson.dtsi
> index bd0e864964e9..3be7cba603d5 100644
> --- a/arch/arm/boot/dts/meson.dtsi
> +++ b/arch/arm/boot/dts/meson.dtsi
> @@ -5,6 +5,7 @@
>
> #include <dt-bindings/interrupt-controller/irq.h>
> #include <dt-bindings/interrupt-controller/arm-gic.h>
> +#include <dt-bindings/sound/meson-aiu.h>
>
> / {
> #address-cells = <1>;
> @@ -36,6 +37,17 @@ hhi: system-controller@...0 {
> reg = <0x4000 0x400>;
> };
>
> + aiu: audio-controller@...0 {
> + compatible = "amlogic,aiu";
> + #sound-dai-cells = <2>;
> + sound-name-prefix = "AIU";
> + reg = <0x5400 0x2ac>;
> + interrupts = <GIC_SPI 48 IRQ_TYPE_EDGE_RISING>,
> + <GIC_SPI 50 IRQ_TYPE_EDGE_RISING>;
> + interrupt-names = "i2s", "spdif";
> + status = "disabled";
> + };
> +
> assist: assist@...0 {
> compatible = "amlogic,meson-mx-assist", "syscon";
> reg = <0x7c00 0x200>;
> diff --git a/arch/arm/boot/dts/meson8.dtsi b/arch/arm/boot/dts/meson8.dtsi
> index 686c7b7c79d5..f80ddc98d3a2 100644
> --- a/arch/arm/boot/dts/meson8.dtsi
> +++ b/arch/arm/boot/dts/meson8.dtsi
> @@ -317,6 +317,29 @@ mali: gpu@...00 {
> };
> }; /* end of / */
>
> +&aiu {
> + compatible = "amlogic,aiu-meson8", "amlogic,aiu";
> + clocks = <&clkc CLKID_AIU_GLUE>,
> + <&clkc CLKID_I2S_OUT>,
> + <&clkc CLKID_AOCLK_GATE>,
> + <&clkc CLKID_CTS_AMCLK>,
> + <&clkc CLKID_MIXER_IFACE>,
> + <&clkc CLKID_IEC958>,
> + <&clkc CLKID_IEC958_GATE>,
> + <&clkc CLKID_CTS_MCLK_I958>,
> + <&clkc CLKID_CTS_I958>;
> + clock-names = "pclk",
> + "i2s_pclk",
> + "i2s_aoclk",
> + "i2s_mclk",
> + "i2s_mixer",
> + "spdif_pclk",
> + "spdif_aoclk",
> + "spdif_mclk",
> + "spdif_mclk_sel";
> + resets = <&reset RESET_AIU>;
> +};
> +
> &aobus {
> pmu: pmu@e0 {
> compatible = "amlogic,meson8-pmu", "syscon";
> @@ -340,6 +363,38 @@ gpio_ao: ao-bank@14 {
> gpio-ranges = <&pinctrl_aobus 0 0 16>;
> };
>
> + i2s_am_clk_pins: i2s-am-clk-out {
> + mux {
> + groups = "i2s_am_clk_out_ao";
> + function = "i2s_ao";
> + bias-disable;
> + };
> + };
> +
> + i2s_out_ao_clk_pins: i2s-ao-clk-out {
> + mux {
> + groups = "i2s_ao_clk_out_ao";
> + function = "i2s_ao";
> + bias-disable;
> + };
> + };
> +
> + i2s_out_lr_clk_pins: i2s-lr-clk-out {
> + mux {
> + groups = "i2s_lr_clk_out_ao";
> + function = "i2s_ao";
> + bias-disable;
> + };
> + };
> +
> + i2s_out_ch01_ao_pins: i2s-out-ch01 {
> + mux {
> + groups = "i2s_out_ch01_ao";
> + function = "i2s_ao";
> + bias-disable;
> + };
> + };
> +
> uart_ao_a_pins: uart_ao_a {
> mux {
> groups = "uart_tx_ao_a", "uart_rx_ao_a";
> @@ -460,6 +515,14 @@ mux {
> };
> };
>
> + spdif_out_pins: spdif-out {
> + mux {
> + groups = "spdif_out";
> + function = "spdif";
> + bias-disable;
> + };
> + };
> +
> spi_nor_pins: nor {
> mux {
> groups = "nor_d", "nor_q", "nor_c", "nor_cs";
> diff --git a/arch/arm/boot/dts/meson8b.dtsi b/arch/arm/boot/dts/meson8b.dtsi
> index c02b03cbcdf4..b49b7cbaed4e 100644
> --- a/arch/arm/boot/dts/meson8b.dtsi
> +++ b/arch/arm/boot/dts/meson8b.dtsi
> @@ -279,6 +279,29 @@ mali: gpu@...00 {
> };
> }; /* end of / */
>
> +&aiu {
> + compatible = "amlogic,aiu-meson8b", "amlogic,aiu";
> + clocks = <&clkc CLKID_AIU_GLUE>,
> + <&clkc CLKID_I2S_OUT>,
> + <&clkc CLKID_AOCLK_GATE>,
> + <&clkc CLKID_CTS_AMCLK>,
> + <&clkc CLKID_MIXER_IFACE>,
> + <&clkc CLKID_IEC958>,
> + <&clkc CLKID_IEC958_GATE>,
> + <&clkc CLKID_CTS_MCLK_I958>,
> + <&clkc CLKID_CTS_I958>;
> + clock-names = "pclk",
> + "i2s_pclk",
> + "i2s_aoclk",
> + "i2s_mclk",
> + "i2s_mixer",
> + "spdif_pclk",
> + "spdif_aoclk",
> + "spdif_mclk",
> + "spdif_mclk_sel";
> + resets = <&reset RESET_AIU>;
> +};
> +
> &aobus {
> pmu: pmu@e0 {
> compatible = "amlogic,meson8b-pmu", "syscon";
> @@ -302,6 +325,46 @@ gpio_ao: ao-bank@14 {
> gpio-ranges = <&pinctrl_aobus 0 0 16>;
> };
>
> + i2s_am_clk_pins: i2s-am-clk-out {
> + mux {
> + groups = "i2s_am_clk_out";
> + function = "i2s";
> + bias-disable;
> + };
> + };
> +
> + i2s_out_ao_clk_pins: i2s-ao-clk-out {
> + mux {
> + groups = "i2s_ao_clk_out";
> + function = "i2s";
> + bias-disable;
> + };
> + };
> +
> + i2s_out_lr_clk_pins: i2s-lr-clk-out {
> + mux {
> + groups = "i2s_lr_clk_out";
> + function = "i2s";
> + bias-disable;
> + };
> + };
> +
> + i2s_out_ch01_ao_pins: i2s-out-ch01 {
> + mux {
> + groups = "i2s_out_01";
> + function = "i2s";
> + bias-disable;
> + };
> + };
> +
> + spdif_out_1_pins: spdif-out-1 {
> + mux {
> + groups = "spdif_out_1";
> + function = "spdif_1";
> + bias-disable;
> + };
> + };
> +
> uart_ao_a_pins: uart_ao_a {
> mux {
> groups = "uart_tx_ao_a", "uart_rx_ao_a";
>
Reviewed-by: Neil Armstrong <narmstrong@...libre.com>
Powered by blists - more mailing lists