| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Date: Mon, 26 Jul 2021 17:38:03 +0200
From: Greg Kroah-Hartman <gregkh@...uxfoundation.org>
To: linux-kernel@...r.kernel.org
Cc: Greg Kroah-Hartman <gregkh@...uxfoundation.org>,
stable@...r.kernel.org, Wu Bo <wubo40@...wei.com>,
John Garry <john.garry@...wei.com>,
Jason Yan <yanaijie@...wei.com>, Yufen Yu <yuyufen@...wei.com>,
"Martin K. Petersen" <martin.petersen@...cle.com>,
Sasha Levin <sashal@...nel.org>
Subject: [PATCH 4.19 031/120] scsi: libsas: Add LUN number check in .slave_alloc callback
From: Yufen Yu <yuyufen@...wei.com>
[ Upstream commit 49da96d77938db21864dae6b7736b71e96c1d203 ]
Offlining a SATA device connected to a hisi SAS controller and then
scanning the host will result in detecting 255 non-existent devices:
# lsscsi
[2:0:0:0] disk ATA Samsung SSD 860 2B6Q /dev/sda
[2:0:1:0] disk ATA WDC WD2003FYYS-3 1D01 /dev/sdb
[2:0:2:0] disk SEAGATE ST600MM0006 B001 /dev/sdc
# echo "offline" > /sys/block/sdb/device/state
# echo "- - -" > /sys/class/scsi_host/host2/scan
# lsscsi
[2:0:0:0] disk ATA Samsung SSD 860 2B6Q /dev/sda
[2:0:1:0] disk ATA WDC WD2003FYYS-3 1D01 /dev/sdb
[2:0:1:1] disk ATA WDC WD2003FYYS-3 1D01 /dev/sdh
...
[2:0:1:255] disk ATA WDC WD2003FYYS-3 1D01 /dev/sdjb
After a REPORT LUN command issued to the offline device fails, the SCSI
midlayer tries to do a sequential scan of all devices whose LUN number is
not 0. However, SATA does not support LUN numbers at all.
Introduce a generic sas_slave_alloc() handler which will return -ENXIO for
SATA devices if the requested LUN number is larger than 0 and make libsas
drivers use this function as their .slave_alloc callback.
Link: https://lore.kernel.org/r/20210622034037.1467088-1-yuyufen@huawei.com
Reported-by: Wu Bo <wubo40@...wei.com>
Suggested-by: John Garry <john.garry@...wei.com>
Reviewed-by: John Garry <john.garry@...wei.com>
Reviewed-by: Jason Yan <yanaijie@...wei.com>
Signed-off-by: Yufen Yu <yuyufen@...wei.com>
Signed-off-by: Martin K. Petersen <martin.petersen@...cle.com>
Signed-off-by: Sasha Levin <sashal@...nel.org>
---
drivers/scsi/aic94xx/aic94xx_init.c | 1 +
drivers/scsi/hisi_sas/hisi_sas_v1_hw.c | 1 +
drivers/scsi/hisi_sas/hisi_sas_v2_hw.c | 1 +
drivers/scsi/hisi_sas/hisi_sas_v3_hw.c | 1 +
drivers/scsi/isci/init.c | 1 +
drivers/scsi/libsas/sas_scsi_host.c | 9 +++++++++
drivers/scsi/mvsas/mv_init.c | 1 +
drivers/scsi/pm8001/pm8001_init.c | 1 +
8 files changed, 16 insertions(+)
diff --git a/drivers/scsi/aic94xx/aic94xx_init.c b/drivers/scsi/aic94xx/aic94xx_init.c
index 702da909cee5..ad8a65ab489c 100644
--- a/drivers/scsi/aic94xx/aic94xx_init.c
+++ b/drivers/scsi/aic94xx/aic94xx_init.c
@@ -71,6 +71,7 @@ static struct scsi_host_template aic94xx_sht = {
.use_clustering = ENABLE_CLUSTERING,
.eh_device_reset_handler = sas_eh_device_reset_handler,
.eh_target_reset_handler = sas_eh_target_reset_handler,
+ .slave_alloc = sas_slave_alloc,
.target_destroy = sas_target_destroy,
.ioctl = sas_ioctl,
.track_queue_depth = 1,
diff --git a/drivers/scsi/hisi_sas/hisi_sas_v1_hw.c b/drivers/scsi/hisi_sas/hisi_sas_v1_hw.c
index 8aa3222fe486..fea26edd505e 100644
--- a/drivers/scsi/hisi_sas/hisi_sas_v1_hw.c
+++ b/drivers/scsi/hisi_sas/hisi_sas_v1_hw.c
@@ -1814,6 +1814,7 @@ static struct scsi_host_template sht_v1_hw = {
.use_clustering = ENABLE_CLUSTERING,
.eh_device_reset_handler = sas_eh_device_reset_handler,
.eh_target_reset_handler = sas_eh_target_reset_handler,
+ .slave_alloc = sas_slave_alloc,
.target_destroy = sas_target_destroy,
.ioctl = sas_ioctl,
.shost_attrs = host_attrs,
diff --git a/drivers/scsi/hisi_sas/hisi_sas_v2_hw.c b/drivers/scsi/hisi_sas/hisi_sas_v2_hw.c
index ebc984ffe6a2..7be943197604 100644
--- a/drivers/scsi/hisi_sas/hisi_sas_v2_hw.c
+++ b/drivers/scsi/hisi_sas/hisi_sas_v2_hw.c
@@ -3565,6 +3565,7 @@ static struct scsi_host_template sht_v2_hw = {
.use_clustering = ENABLE_CLUSTERING,
.eh_device_reset_handler = sas_eh_device_reset_handler,
.eh_target_reset_handler = sas_eh_target_reset_handler,
+ .slave_alloc = sas_slave_alloc,
.target_destroy = sas_target_destroy,
.ioctl = sas_ioctl,
.shost_attrs = host_attrs,
diff --git a/drivers/scsi/hisi_sas/hisi_sas_v3_hw.c b/drivers/scsi/hisi_sas/hisi_sas_v3_hw.c
index ce2f232b3df3..16b7ea556118 100644
--- a/drivers/scsi/hisi_sas/hisi_sas_v3_hw.c
+++ b/drivers/scsi/hisi_sas/hisi_sas_v3_hw.c
@@ -2115,6 +2115,7 @@ static struct scsi_host_template sht_v3_hw = {
.use_clustering = ENABLE_CLUSTERING,
.eh_device_reset_handler = sas_eh_device_reset_handler,
.eh_target_reset_handler = sas_eh_target_reset_handler,
+ .slave_alloc = sas_slave_alloc,
.target_destroy = sas_target_destroy,
.ioctl = sas_ioctl,
.shost_attrs = host_attrs,
diff --git a/drivers/scsi/isci/init.c b/drivers/scsi/isci/init.c
index dde84f744313..07de94ea3819 100644
--- a/drivers/scsi/isci/init.c
+++ b/drivers/scsi/isci/init.c
@@ -167,6 +167,7 @@ static struct scsi_host_template isci_sht = {
.eh_abort_handler = sas_eh_abort_handler,
.eh_device_reset_handler = sas_eh_device_reset_handler,
.eh_target_reset_handler = sas_eh_target_reset_handler,
+ .slave_alloc = sas_slave_alloc,
.target_destroy = sas_target_destroy,
.ioctl = sas_ioctl,
.shost_attrs = isci_host_attrs,
diff --git a/drivers/scsi/libsas/sas_scsi_host.c b/drivers/scsi/libsas/sas_scsi_host.c
index 33229348dcb6..316a11183555 100644
--- a/drivers/scsi/libsas/sas_scsi_host.c
+++ b/drivers/scsi/libsas/sas_scsi_host.c
@@ -942,6 +942,14 @@ void sas_task_abort(struct sas_task *task)
}
}
+int sas_slave_alloc(struct scsi_device *sdev)
+{
+ if (dev_is_sata(sdev_to_domain_dev(sdev)) && sdev->lun)
+ return -ENXIO;
+
+ return 0;
+}
+
void sas_target_destroy(struct scsi_target *starget)
{
struct domain_device *found_dev = starget->hostdata;
@@ -988,5 +996,6 @@ EXPORT_SYMBOL_GPL(sas_task_abort);
EXPORT_SYMBOL_GPL(sas_phy_reset);
EXPORT_SYMBOL_GPL(sas_eh_device_reset_handler);
EXPORT_SYMBOL_GPL(sas_eh_target_reset_handler);
+EXPORT_SYMBOL_GPL(sas_slave_alloc);
EXPORT_SYMBOL_GPL(sas_target_destroy);
EXPORT_SYMBOL_GPL(sas_ioctl);
diff --git a/drivers/scsi/mvsas/mv_init.c b/drivers/scsi/mvsas/mv_init.c
index 8c91637cd598..98d6608068ab 100644
--- a/drivers/scsi/mvsas/mv_init.c
+++ b/drivers/scsi/mvsas/mv_init.c
@@ -62,6 +62,7 @@ static struct scsi_host_template mvs_sht = {
.use_clustering = ENABLE_CLUSTERING,
.eh_device_reset_handler = sas_eh_device_reset_handler,
.eh_target_reset_handler = sas_eh_target_reset_handler,
+ .slave_alloc = sas_slave_alloc,
.target_destroy = sas_target_destroy,
.ioctl = sas_ioctl,
.shost_attrs = mvst_host_attrs,
diff --git a/drivers/scsi/pm8001/pm8001_init.c b/drivers/scsi/pm8001/pm8001_init.c
index 1d59d7447a1c..9547cf516d39 100644
--- a/drivers/scsi/pm8001/pm8001_init.c
+++ b/drivers/scsi/pm8001/pm8001_init.c
@@ -87,6 +87,7 @@ static struct scsi_host_template pm8001_sht = {
.use_clustering = ENABLE_CLUSTERING,
.eh_device_reset_handler = sas_eh_device_reset_handler,
.eh_target_reset_handler = sas_eh_target_reset_handler,
+ .slave_alloc = sas_slave_alloc,
.target_destroy = sas_target_destroy,
.ioctl = sas_ioctl,
.shost_attrs = pm8001_host_attrs,
--
2.30.2
Powered by blists - more mailing lists