linux-kernel - Re: [PATCH v2] scsi: Fix the issue that the disk capacity set to zero

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Date:   Mon, 26 Jul 2021 20:39:05 -0700
From:   Bart Van Assche <bvanassche@....org>
To:     lijinlin3@...wei.com, jejb@...ux.ibm.com,
        martin.petersen@...cle.com, linux-scsi@...r.kernel.org,
        linux-kernel@...r.kernel.org
Cc:     john.garry@...wei.com, yanaijie@...wei.com, linfeilong@...wei.com,
        wubo40@...wei.com
Subject: Re: [PATCH v2] scsi: Fix the issue that the disk capacity set to zero

On 7/26/21 8:44 PM, lijinlin3@...wei.com wrote:
> From: lijinlin <lijinlin3@...wei.com>
> 
> After add physical volumes to a volume group through vgextend, kernel
> will rescan partitions, which will read the capacity of the device.
> If the device status is set to offline through sysfs at this time,
> read capacity command will return a result which the host byte is
> DID_NO_CONNECT, the capacity of the device will be set to zero in
> read_capacity_error(). However, the capacity of the device can't be
> reread after reset the device status to running, is still zero.
> 
> Fix this issue by rescan device when the device state changes to
> SDEV_RUNNING.
> 
> Signed-off-by: lijinlin <lijinlin3@...wei.com>
> Signed-off-by: Wu Bo <wubo40@...wei.com>
> ---
>  drivers/scsi/scsi_sysfs.c | 9 ++++++---
>  1 file changed, 6 insertions(+), 3 deletions(-)
> 
> diff --git a/drivers/scsi/scsi_sysfs.c b/drivers/scsi/scsi_sysfs.c
> index 32489d25158f..ae9bfc658203 100644
> --- a/drivers/scsi/scsi_sysfs.c
> +++ b/drivers/scsi/scsi_sysfs.c
> @@ -807,11 +807,14 @@ store_state_field(struct device *dev, struct device_attribute *attr,
>  	mutex_lock(&sdev->state_mutex);
>  	ret = scsi_device_set_state(sdev, state);
>  	/*
> -	 * If the device state changes to SDEV_RUNNING, we need to run
> -	 * the queue to avoid I/O hang.
> +	 * If the device state changes to SDEV_RUNNING, we need to
> +	 * rescan the device to revalidate it, and run the queue to
> +	 * avoid I/O hang.
>  	 */
> -	if (ret == 0 && state == SDEV_RUNNING)
> +	if (ret == 0 && state == SDEV_RUNNING) {
> +		scsi_rescan_device(dev);
>  		blk_mq_run_hw_queues(sdev->request_queue, true);
> +	}
>  	mutex_unlock(&sdev->state_mutex);
>  
>  	return ret == 0 ? count : -EINVAL;

In the future, please mention what has been changed between v1 and v2
under the three dashes ("---"). Anyway:

Reviewed-by: Bart Van Assche <bvanassche@....org>