| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-Id: <20210727232219.2948-5-phil@philpotter.co.uk>
Date: Wed, 28 Jul 2021 00:22:17 +0100
From: Phillip Potter <phil@...lpotter.co.uk>
To: gregkh@...uxfoundation.org
Cc: Larry.Finger@...inger.net, dan.carpenter@...cle.com,
linux-kernel@...r.kernel.org, linux-staging@...ts.linux.dev,
fabioaiuto83@...il.com, martin@...ser.cx
Subject: [PATCH v4 4/6] staging: r8188eu: introduce new include dir for RTL8188eu driver
This patchset is split in order to keep the file sizes down. This
include directory is part of the newer/better driver from GitHub
modified by Larry Finger. Import this as the basis for all future
work going forward.
Suggested-by: Larry Finger <Larry.Finger@...inger.net>
Signed-off-by: Phillip Potter <phil@...lpotter.co.uk>
---
.../staging/r8188eu/include/Hal8188EPhyCfg.h | 269 +++
.../staging/r8188eu/include/Hal8188EPhyReg.h | 1088 +++++++++++++
.../staging/r8188eu/include/Hal8188EPwrSeq.h | 173 ++
.../r8188eu/include/Hal8188ERateAdaptive.h | 75 +
drivers/staging/r8188eu/include/Hal8188EReg.h | 44 +
.../r8188eu/include/HalHWImg8188E_BB.h | 44 +
.../r8188eu/include/HalHWImg8188E_FW.h | 33 +
.../r8188eu/include/HalHWImg8188E_MAC.h | 30 +
.../r8188eu/include/HalHWImg8188E_RF.h | 30 +
drivers/staging/r8188eu/include/HalPhyRf.h | 30 +
.../staging/r8188eu/include/HalPhyRf_8188e.h | 58 +
.../staging/r8188eu/include/HalPwrSeqCmd.h | 126 ++
drivers/staging/r8188eu/include/HalVerDef.h | 166 ++
drivers/staging/r8188eu/include/autoconf.h | 43 +
drivers/staging/r8188eu/include/basic_types.h | 184 +++
drivers/staging/r8188eu/include/cmd_osdep.h | 32 +
drivers/staging/r8188eu/include/drv_types.h | 346 ++++
.../staging/r8188eu/include/drv_types_linux.h | 23 +
drivers/staging/r8188eu/include/ethernet.h | 41 +
drivers/staging/r8188eu/include/h2clbk.h | 32 +
drivers/staging/r8188eu/include/hal_com.h | 172 ++
drivers/staging/r8188eu/include/hal_intf.h | 430 +++++
drivers/staging/r8188eu/include/ieee80211.h | 1261 +++++++++++++++
.../staging/r8188eu/include/ieee80211_ext.h | 287 ++++
drivers/staging/r8188eu/include/if_ether.h | 111 ++
.../staging/r8188eu/include/ioctl_cfg80211.h | 107 ++
drivers/staging/r8188eu/include/ip.h | 125 ++
drivers/staging/r8188eu/include/mlme_osdep.h | 35 +
.../staging/r8188eu/include/mp_custom_oid.h | 349 ++++
drivers/staging/r8188eu/include/nic_spec.h | 41 +
drivers/staging/r8188eu/include/odm.h | 1182 ++++++++++++++
.../staging/r8188eu/include/odm_HWConfig.h | 133 ++
.../staging/r8188eu/include/odm_RTL8188E.h | 56 +
.../r8188eu/include/odm_RegConfig8188E.h | 43 +
.../r8188eu/include/odm_RegDefine11AC.h | 46 +
.../r8188eu/include/odm_RegDefine11N.h | 160 ++
drivers/staging/r8188eu/include/odm_debug.h | 143 ++
.../staging/r8188eu/include/odm_interface.h | 164 ++
drivers/staging/r8188eu/include/odm_precomp.h | 103 ++
drivers/staging/r8188eu/include/odm_reg.h | 116 ++
drivers/staging/r8188eu/include/odm_types.h | 61 +
drivers/staging/r8188eu/include/osdep_intf.h | 83 +
.../staging/r8188eu/include/osdep_service.h | 489 ++++++
drivers/staging/r8188eu/include/recv_osdep.h | 54 +
.../staging/r8188eu/include/rtl8188e_cmd.h | 122 ++
drivers/staging/r8188eu/include/rtl8188e_dm.h | 62 +
.../staging/r8188eu/include/rtl8188e_hal.h | 471 ++++++
.../staging/r8188eu/include/rtl8188e_led.h | 34 +
.../staging/r8188eu/include/rtl8188e_recv.h | 69 +
drivers/staging/r8188eu/include/rtl8188e_rf.h | 35 +
.../staging/r8188eu/include/rtl8188e_spec.h | 1438 +++++++++++++++++
.../staging/r8188eu/include/rtl8188e_sreset.h | 31 +
.../staging/r8188eu/include/rtl8188e_xmit.h | 177 ++
drivers/staging/r8188eu/include/rtw_android.h | 64 +
drivers/staging/r8188eu/include/rtw_ap.h | 67 +
drivers/staging/r8188eu/include/rtw_br_ext.h | 66 +
drivers/staging/r8188eu/include/rtw_cmd.h | 991 ++++++++++++
drivers/staging/r8188eu/include/rtw_debug.h | 274 ++++
drivers/staging/r8188eu/include/rtw_eeprom.h | 130 ++
drivers/staging/r8188eu/include/rtw_efuse.h | 150 ++
drivers/staging/r8188eu/include/rtw_event.h | 113 ++
drivers/staging/r8188eu/include/rtw_ht.h | 44 +
drivers/staging/r8188eu/include/rtw_io.h | 387 +++++
drivers/staging/r8188eu/include/rtw_ioctl.h | 120 ++
.../staging/r8188eu/include/rtw_ioctl_rtl.h | 79 +
.../staging/r8188eu/include/rtw_ioctl_set.h | 49 +
drivers/staging/r8188eu/include/rtw_iol.h | 84 +
drivers/staging/r8188eu/include/rtw_led.h | 201 +++
drivers/staging/r8188eu/include/rtw_mlme.h | 649 ++++++++
.../staging/r8188eu/include/rtw_mlme_ext.h | 874 ++++++++++
drivers/staging/r8188eu/include/rtw_mp.h | 492 ++++++
.../staging/r8188eu/include/rtw_mp_ioctl.h | 339 ++++
.../r8188eu/include/rtw_mp_phy_regdef.h | 1079 +++++++++++++
drivers/staging/r8188eu/include/rtw_p2p.h | 135 ++
drivers/staging/r8188eu/include/rtw_pwrctrl.h | 282 ++++
drivers/staging/r8188eu/include/rtw_qos.h | 30 +
drivers/staging/r8188eu/include/rtw_recv.h | 473 ++++++
drivers/staging/r8188eu/include/rtw_rf.h | 145 ++
.../staging/r8188eu/include/rtw_security.h | 382 +++++
drivers/staging/r8188eu/include/rtw_sreset.h | 50 +
drivers/staging/r8188eu/include/rtw_version.h | 1 +
drivers/staging/r8188eu/include/rtw_xmit.h | 383 +++++
drivers/staging/r8188eu/include/sta_info.h | 384 +++++
drivers/staging/r8188eu/include/usb_hal.h | 26 +
drivers/staging/r8188eu/include/usb_ops.h | 115 ++
.../staging/r8188eu/include/usb_ops_linux.h | 55 +
drivers/staging/r8188eu/include/usb_osintf.h | 45 +
.../staging/r8188eu/include/usb_vendor_req.h | 51 +
drivers/staging/r8188eu/include/wifi.h | 1105 +++++++++++++
drivers/staging/r8188eu/include/wlan_bssdef.h | 343 ++++
drivers/staging/r8188eu/include/xmit_osdep.h | 67 +
91 files changed, 21381 insertions(+)
create mode 100644 drivers/staging/r8188eu/include/Hal8188EPhyCfg.h
create mode 100644 drivers/staging/r8188eu/include/Hal8188EPhyReg.h
create mode 100644 drivers/staging/r8188eu/include/Hal8188EPwrSeq.h
create mode 100644 drivers/staging/r8188eu/include/Hal8188ERateAdaptive.h
create mode 100644 drivers/staging/r8188eu/include/Hal8188EReg.h
create mode 100644 drivers/staging/r8188eu/include/HalHWImg8188E_BB.h
create mode 100644 drivers/staging/r8188eu/include/HalHWImg8188E_FW.h
create mode 100644 drivers/staging/r8188eu/include/HalHWImg8188E_MAC.h
create mode 100644 drivers/staging/r8188eu/include/HalHWImg8188E_RF.h
create mode 100644 drivers/staging/r8188eu/include/HalPhyRf.h
create mode 100644 drivers/staging/r8188eu/include/HalPhyRf_8188e.h
create mode 100644 drivers/staging/r8188eu/include/HalPwrSeqCmd.h
create mode 100644 drivers/staging/r8188eu/include/HalVerDef.h
create mode 100644 drivers/staging/r8188eu/include/autoconf.h
create mode 100644 drivers/staging/r8188eu/include/basic_types.h
create mode 100644 drivers/staging/r8188eu/include/cmd_osdep.h
create mode 100644 drivers/staging/r8188eu/include/drv_types.h
create mode 100644 drivers/staging/r8188eu/include/drv_types_linux.h
create mode 100644 drivers/staging/r8188eu/include/ethernet.h
create mode 100644 drivers/staging/r8188eu/include/h2clbk.h
create mode 100644 drivers/staging/r8188eu/include/hal_com.h
create mode 100644 drivers/staging/r8188eu/include/hal_intf.h
create mode 100644 drivers/staging/r8188eu/include/ieee80211.h
create mode 100644 drivers/staging/r8188eu/include/ieee80211_ext.h
create mode 100644 drivers/staging/r8188eu/include/if_ether.h
create mode 100644 drivers/staging/r8188eu/include/ioctl_cfg80211.h
create mode 100644 drivers/staging/r8188eu/include/ip.h
create mode 100644 drivers/staging/r8188eu/include/mlme_osdep.h
create mode 100644 drivers/staging/r8188eu/include/mp_custom_oid.h
create mode 100644 drivers/staging/r8188eu/include/nic_spec.h
create mode 100644 drivers/staging/r8188eu/include/odm.h
create mode 100644 drivers/staging/r8188eu/include/odm_HWConfig.h
create mode 100644 drivers/staging/r8188eu/include/odm_RTL8188E.h
create mode 100644 drivers/staging/r8188eu/include/odm_RegConfig8188E.h
create mode 100644 drivers/staging/r8188eu/include/odm_RegDefine11AC.h
create mode 100644 drivers/staging/r8188eu/include/odm_RegDefine11N.h
create mode 100644 drivers/staging/r8188eu/include/odm_debug.h
create mode 100644 drivers/staging/r8188eu/include/odm_interface.h
create mode 100644 drivers/staging/r8188eu/include/odm_precomp.h
create mode 100644 drivers/staging/r8188eu/include/odm_reg.h
create mode 100644 drivers/staging/r8188eu/include/odm_types.h
create mode 100644 drivers/staging/r8188eu/include/osdep_intf.h
create mode 100644 drivers/staging/r8188eu/include/osdep_service.h
create mode 100644 drivers/staging/r8188eu/include/recv_osdep.h
create mode 100644 drivers/staging/r8188eu/include/rtl8188e_cmd.h
create mode 100644 drivers/staging/r8188eu/include/rtl8188e_dm.h
create mode 100644 drivers/staging/r8188eu/include/rtl8188e_hal.h
create mode 100644 drivers/staging/r8188eu/include/rtl8188e_led.h
create mode 100644 drivers/staging/r8188eu/include/rtl8188e_recv.h
create mode 100644 drivers/staging/r8188eu/include/rtl8188e_rf.h
create mode 100644 drivers/staging/r8188eu/include/rtl8188e_spec.h
create mode 100644 drivers/staging/r8188eu/include/rtl8188e_sreset.h
create mode 100644 drivers/staging/r8188eu/include/rtl8188e_xmit.h
create mode 100644 drivers/staging/r8188eu/include/rtw_android.h
create mode 100644 drivers/staging/r8188eu/include/rtw_ap.h
create mode 100644 drivers/staging/r8188eu/include/rtw_br_ext.h
create mode 100644 drivers/staging/r8188eu/include/rtw_cmd.h
create mode 100644 drivers/staging/r8188eu/include/rtw_debug.h
create mode 100644 drivers/staging/r8188eu/include/rtw_eeprom.h
create mode 100644 drivers/staging/r8188eu/include/rtw_efuse.h
create mode 100644 drivers/staging/r8188eu/include/rtw_event.h
create mode 100644 drivers/staging/r8188eu/include/rtw_ht.h
create mode 100644 drivers/staging/r8188eu/include/rtw_io.h
create mode 100644 drivers/staging/r8188eu/include/rtw_ioctl.h
create mode 100644 drivers/staging/r8188eu/include/rtw_ioctl_rtl.h
create mode 100644 drivers/staging/r8188eu/include/rtw_ioctl_set.h
create mode 100644 drivers/staging/r8188eu/include/rtw_iol.h
create mode 100644 drivers/staging/r8188eu/include/rtw_led.h
create mode 100644 drivers/staging/r8188eu/include/rtw_mlme.h
create mode 100644 drivers/staging/r8188eu/include/rtw_mlme_ext.h
create mode 100644 drivers/staging/r8188eu/include/rtw_mp.h
create mode 100644 drivers/staging/r8188eu/include/rtw_mp_ioctl.h
create mode 100644 drivers/staging/r8188eu/include/rtw_mp_phy_regdef.h
create mode 100644 drivers/staging/r8188eu/include/rtw_p2p.h
create mode 100644 drivers/staging/r8188eu/include/rtw_pwrctrl.h
create mode 100644 drivers/staging/r8188eu/include/rtw_qos.h
create mode 100644 drivers/staging/r8188eu/include/rtw_recv.h
create mode 100644 drivers/staging/r8188eu/include/rtw_rf.h
create mode 100644 drivers/staging/r8188eu/include/rtw_security.h
create mode 100644 drivers/staging/r8188eu/include/rtw_sreset.h
create mode 100644 drivers/staging/r8188eu/include/rtw_version.h
create mode 100644 drivers/staging/r8188eu/include/rtw_xmit.h
create mode 100644 drivers/staging/r8188eu/include/sta_info.h
create mode 100644 drivers/staging/r8188eu/include/usb_hal.h
create mode 100644 drivers/staging/r8188eu/include/usb_ops.h
create mode 100644 drivers/staging/r8188eu/include/usb_ops_linux.h
create mode 100644 drivers/staging/r8188eu/include/usb_osintf.h
create mode 100644 drivers/staging/r8188eu/include/usb_vendor_req.h
create mode 100644 drivers/staging/r8188eu/include/wifi.h
create mode 100644 drivers/staging/r8188eu/include/wlan_bssdef.h
create mode 100644 drivers/staging/r8188eu/include/xmit_osdep.h
diff --git a/drivers/staging/r8188eu/include/Hal8188EPhyCfg.h b/drivers/staging/r8188eu/include/Hal8188EPhyCfg.h
new file mode 100644
index 000000000000..6fb059576a67
--- /dev/null
+++ b/drivers/staging/r8188eu/include/Hal8188EPhyCfg.h
@@ -0,0 +1,269 @@
+/******************************************************************************
+ *
+ * Copyright(c) 2007 - 2011 Realtek Corporation. All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of version 2 of the GNU General Public License as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
+ * more details.
+ *
+ * You should have received a copy of the GNU General Public License along with
+ * this program; if not, write to the Free Software Foundation, Inc.,
+ * 51 Franklin Street, Fifth Floor, Boston, MA 02110, USA
+ *
+ *
+ ******************************************************************************/
+#ifndef __INC_HAL8188EPHYCFG_H__
+#define __INC_HAL8188EPHYCFG_H__
+
+/*--------------------------Define Parameters-------------------------------*/
+#define LOOP_LIMIT 5
+#define MAX_STALL_TIME 50 /* us */
+#define AntennaDiversityValue 0x80
+#define MAX_TXPWR_IDX_NMODE_92S 63
+#define Reset_Cnt_Limit 3
+
+#define IQK_MAC_REG_NUM 4
+#define IQK_ADDA_REG_NUM 16
+#define IQK_BB_REG_NUM 9
+#define HP_THERMAL_NUM 8
+
+#define MAX_AGGR_NUM 0x07
+
+/*--------------------------Define Parameters-------------------------------*/
+
+/*------------------------------Define structure----------------------------*/
+enum sw_chnl_cmd_id {
+ CmdID_End,
+ CmdID_SetTxPowerLevel,
+ CmdID_BBRegWrite10,
+ CmdID_WritePortUlong,
+ CmdID_WritePortUshort,
+ CmdID_WritePortUchar,
+ CmdID_RF_WriteReg,
+};
+
+/* 1. Switch channel related */
+struct sw_chnl_cmd {
+ enum sw_chnl_cmd_id CmdID;
+ u32 Para1;
+ u32 Para2;
+ u32 msDelay;
+};
+
+enum hw90_block {
+ HW90_BLOCK_MAC = 0,
+ HW90_BLOCK_PHY0 = 1,
+ HW90_BLOCK_PHY1 = 2,
+ HW90_BLOCK_RF = 3,
+ HW90_BLOCK_MAXIMUM = 4, /* Never use this */
+};
+
+enum rf_radio_path {
+ RF_PATH_A = 0, /* Radio Path A */
+ RF_PATH_B = 1, /* Radio Path B */
+ RF_PATH_C = 2, /* Radio Path C */
+ RF_PATH_D = 3, /* Radio Path D */
+};
+
+#define MAX_PG_GROUP 13
+
+#define RF_PATH_MAX 3
+#define MAX_TX_COUNT 4 /* path numbers */
+
+#define CHANNEL_MAX_NUMBER 14 /* 14 is the max chnl number */
+#define MAX_CHNL_GROUP_24G 6 /* ch1~2, ch3~5, ch6~8,
+ *ch9~11, ch12~13, CH 14
+ * total three groups */
+#define CHANNEL_GROUP_MAX_88E 6
+
+enum wireless_mode {
+ WIRELESS_MODE_UNKNOWN = 0x00,
+ WIRELESS_MODE_A = BIT2,
+ WIRELESS_MODE_B = BIT0,
+ WIRELESS_MODE_G = BIT1,
+ WIRELESS_MODE_AUTO = BIT5,
+ WIRELESS_MODE_N_24G = BIT3,
+ WIRELESS_MODE_N_5G = BIT4,
+ WIRELESS_MODE_AC = BIT6
+};
+
+enum phy_rate_tx_offset_area {
+ RA_OFFSET_LEGACY_OFDM1,
+ RA_OFFSET_LEGACY_OFDM2,
+ RA_OFFSET_HT_OFDM1,
+ RA_OFFSET_HT_OFDM2,
+ RA_OFFSET_HT_OFDM3,
+ RA_OFFSET_HT_OFDM4,
+ RA_OFFSET_HT_CCK,
+};
+
+/* BB/RF related */
+enum RF_TYPE_8190P {
+ RF_TYPE_MIN, /* 0 */
+ RF_8225 = 1, /* 1 11b/g RF for verification only */
+ RF_8256 = 2, /* 2 11b/g/n */
+ RF_8258 = 3, /* 3 11a/b/g/n RF */
+ RF_6052 = 4, /* 4 11b/g/n RF */
+ /* TODO: We should remove this psudo PHY RF after we get new RF. */
+ RF_PSEUDO_11N = 5, /* 5, It is a temporality RF. */
+};
+
+struct bb_reg_def {
+ u32 rfintfs; /* set software control: */
+ /* 0x870~0x877[8 bytes] */
+ u32 rfintfi; /* readback data: */
+ /* 0x8e0~0x8e7[8 bytes] */
+ u32 rfintfo; /* output data: */
+ /* 0x860~0x86f [16 bytes] */
+ u32 rfintfe; /* output enable: */
+ /* 0x860~0x86f [16 bytes] */
+ u32 rf3wireOffset; /* LSSI data: */
+ /* 0x840~0x84f [16 bytes] */
+ u32 rfLSSI_Select; /* BB Band Select: */
+ /* 0x878~0x87f [8 bytes] */
+ u32 rfTxGainStage; /* Tx gain stage: */
+ /* 0x80c~0x80f [4 bytes] */
+ u32 rfHSSIPara1; /* wire parameter control1 : */
+ /* 0x820~0x823,0x828~0x82b,
+ * 0x830~0x833, 0x838~0x83b [16 bytes] */
+ u32 rfHSSIPara2; /* wire parameter control2 : */
+ /* 0x824~0x827,0x82c~0x82f, 0x834~0x837,
+ * 0x83c~0x83f [16 bytes] */
+ u32 rfSwitchControl; /* Tx Rx antenna control : */
+ /* 0x858~0x85f [16 bytes] */
+ u32 rfAGCControl1; /* AGC parameter control1 : */
+ /* 0xc50~0xc53,0xc58~0xc5b, 0xc60~0xc63,
+ * 0xc68~0xc6b [16 bytes] */
+ u32 rfAGCControl2; /* AGC parameter control2 : */
+ /* 0xc54~0xc57,0xc5c~0xc5f, 0xc64~0xc67,
+ * 0xc6c~0xc6f [16 bytes] */
+ u32 rfRxIQImbalance; /* OFDM Rx IQ imbalance matrix : */
+ /* 0xc14~0xc17,0xc1c~0xc1f, 0xc24~0xc27,
+ * 0xc2c~0xc2f [16 bytes] */
+ u32 rfRxAFE; /* Rx IQ DC ofset and Rx digital filter,
+ * Rx DC notch filter : */
+ /* 0xc10~0xc13,0xc18~0xc1b, 0xc20~0xc23,
+ * 0xc28~0xc2b [16 bytes] */
+ u32 rfTxIQImbalance; /* OFDM Tx IQ imbalance matrix */
+ /* 0xc80~0xc83,0xc88~0xc8b, 0xc90~0xc93,
+ * 0xc98~0xc9b [16 bytes] */
+ u32 rfTxAFE; /* Tx IQ DC Offset and Tx DFIR type */
+ /* 0xc84~0xc87,0xc8c~0xc8f, 0xc94~0xc97,
+ * 0xc9c~0xc9f [16 bytes] */
+ u32 rfLSSIReadBack; /* LSSI RF readback data SI mode */
+ /* 0x8a0~0x8af [16 bytes] */
+ u32 rfLSSIReadBackPi; /* LSSI RF readback data PI mode 0x8b8-8bc for
+ * Path A and B */
+};
+
+struct ant_sel_ofdm {
+ u32 r_tx_antenna:4;
+ u32 r_ant_l:4;
+ u32 r_ant_non_ht:4;
+ u32 r_ant_ht1:4;
+ u32 r_ant_ht2:4;
+ u32 r_ant_ht_s1:4;
+ u32 r_ant_non_ht_s1:4;
+ u32 OFDM_TXSC:2;
+ u32 reserved:2;
+};
+
+struct ant_sel_cck {
+ u8 r_cckrx_enable_2:2;
+ u8 r_cckrx_enable:2;
+ u8 r_ccktx_enable:4;
+};
+
+/*------------------------------Define structure----------------------------*/
+
+/*------------------------Export global variable----------------------------*/
+/*------------------------Export global variable----------------------------*/
+
+/*------------------------Export Marco Definition---------------------------*/
+/*------------------------Export Marco Definition---------------------------*/
+
+/*--------------------------Exported Function prototype---------------------*/
+/* */
+/* BB and RF register read/write */
+/* */
+u32 rtl8188e_PHY_QueryBBReg(struct adapter *adapter, u32 regaddr, u32 mask);
+void rtl8188e_PHY_SetBBReg(struct adapter *Adapter, u32 RegAddr,
+ u32 mask, u32 data);
+u32 rtl8188e_PHY_QueryRFReg(struct adapter *adapter, enum rf_radio_path rfpath,
+ u32 regaddr, u32 mask);
+void rtl8188e_PHY_SetRFReg(struct adapter *adapter, enum rf_radio_path rfpath,
+ u32 regaddr, u32 mask, u32 data);
+
+/* Initialization related function */
+/* MAC/BB/RF HAL config */
+int PHY_MACConfig8188E(struct adapter *adapter);
+int PHY_BBConfig8188E(struct adapter *adapter);
+int PHY_RFConfig8188E(struct adapter *adapter);
+
+/* RF config */
+int rtl8188e_PHY_ConfigRFWithParaFile(struct adapter *adapter, u8 *filename,
+ enum rf_radio_path rfpath);
+int rtl8188e_PHY_ConfigRFWithHeaderFile(struct adapter *adapter,
+ enum rf_radio_path rfpath);
+
+/* Read initi reg value for tx power setting. */
+void rtl8192c_PHY_GetHWRegOriginalValue(struct adapter *adapter);
+
+/* BB TX Power R/W */
+void PHY_GetTxPowerLevel8188E(struct adapter *adapter, u32 *powerlevel);
+void PHY_SetTxPowerLevel8188E(struct adapter *adapter, u8 channel);
+bool PHY_UpdateTxPowerDbm8188E(struct adapter *adapter, int power);
+
+void PHY_ScanOperationBackup8188E(struct adapter *Adapter, u8 Operation);
+
+/* Switch bandwidth for 8192S */
+void PHY_SetBWMode8188E(struct adapter *adapter,
+ enum ht_channel_width chnlwidth, unsigned char offset);
+
+/* channel switch related funciton */
+void PHY_SwChnl8188E(struct adapter *adapter, u8 channel);
+/* Call after initialization */
+void ChkFwCmdIoDone(struct adapter *adapter);
+
+/* BB/MAC/RF other monitor API */
+void PHY_SetRFPathSwitch_8188E(struct adapter *adapter, bool main);
+
+void PHY_SwitchEphyParameter(struct adapter *adapter);
+
+void PHY_EnableHostClkReq(struct adapter *adapter);
+
+bool SetAntennaConfig92C(struct adapter *adapter, u8 defaultant);
+
+void storePwrIndexDiffRateOffset(struct adapter *adapter, u32 regaddr,
+ u32 mask, u32 data);
+/*--------------------------Exported Function prototype---------------------*/
+
+#define PHY_QueryBBReg(adapt, regaddr, mask) \
+ rtl8188e_PHY_QueryBBReg((adapt), (regaddr), (mask))
+#define PHY_SetBBReg(adapt, regaddr, bitmask, data) \
+ rtl8188e_PHY_SetBBReg((adapt), (regaddr), (bitmask), (data))
+#define PHY_QueryRFReg(adapt, rfpath, regaddr, bitmask) \
+ rtl8188e_PHY_QueryRFReg((adapt), (rfpath), (regaddr), (bitmask))
+#define PHY_SetRFReg(adapt, rfpath, regaddr, bitmask, data) \
+ rtl8188e_PHY_SetRFReg((adapt), (rfpath), (regaddr), (bitmask), (data))
+
+#define PHY_SetMacReg PHY_SetBBReg
+
+#define SIC_HW_SUPPORT 0
+
+#define SIC_MAX_POLL_CNT 5
+
+#define SIC_CMD_READY 0
+#define SIC_CMD_WRITE 1
+#define SIC_CMD_READ 2
+
+#define SIC_CMD_REG 0x1EB /* 1byte */
+#define SIC_ADDR_REG 0x1E8 /* 1b9~1ba, 2 bytes */
+#define SIC_DATA_REG 0x1EC /* 1bc~1bf */
+
+#endif /* __INC_HAL8192CPHYCFG_H */
diff --git a/drivers/staging/r8188eu/include/Hal8188EPhyReg.h b/drivers/staging/r8188eu/include/Hal8188EPhyReg.h
new file mode 100644
index 000000000000..c324970171cd
--- /dev/null
+++ b/drivers/staging/r8188eu/include/Hal8188EPhyReg.h
@@ -0,0 +1,1088 @@
+/******************************************************************************
+ *
+ * Copyright(c) 2007 - 2011 Realtek Corporation. All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of version 2 of the GNU General Public License as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
+ * more details.
+ *
+ * You should have received a copy of the GNU General Public License along with
+ * this program; if not, write to the Free Software Foundation, Inc.,
+ * 51 Franklin Street, Fifth Floor, Boston, MA 02110, USA
+ *
+ *
+ ******************************************************************************/
+#ifndef __INC_HAL8188EPHYREG_H__
+#define __INC_HAL8188EPHYREG_H__
+/*--------------------------Define Parameters-------------------------------*/
+/* */
+/* BB-PHY register PMAC 0x100 PHY 0x800 - 0xEFF */
+/* 1. PMAC duplicate register due to connection: RF_Mode, TRxRN, NumOf L-STF */
+/* 2. 0x800/0x900/0xA00/0xC00/0xD00/0xE00 */
+/* 3. RF register 0x00-2E */
+/* 4. Bit Mask for BB/RF register */
+/* 5. Other definition for BB/RF R/W */
+/* */
+
+/* */
+/* 1. PMAC duplicate register due to connection: RF_Mode, TRxRN, NumOf L-STF */
+/* 1. Page1(0x100) */
+/* */
+#define rPMAC_Reset 0x100
+#define rPMAC_TxStart 0x104
+#define rPMAC_TxLegacySIG 0x108
+#define rPMAC_TxHTSIG1 0x10c
+#define rPMAC_TxHTSIG2 0x110
+#define rPMAC_PHYDebug 0x114
+#define rPMAC_TxPacketNum 0x118
+#define rPMAC_TxIdle 0x11c
+#define rPMAC_TxMACHeader0 0x120
+#define rPMAC_TxMACHeader1 0x124
+#define rPMAC_TxMACHeader2 0x128
+#define rPMAC_TxMACHeader3 0x12c
+#define rPMAC_TxMACHeader4 0x130
+#define rPMAC_TxMACHeader5 0x134
+#define rPMAC_TxDataType 0x138
+#define rPMAC_TxRandomSeed 0x13c
+#define rPMAC_CCKPLCPPreamble 0x140
+#define rPMAC_CCKPLCPHeader 0x144
+#define rPMAC_CCKCRC16 0x148
+#define rPMAC_OFDMRxCRC32OK 0x170
+#define rPMAC_OFDMRxCRC32Er 0x174
+#define rPMAC_OFDMRxParityEr 0x178
+#define rPMAC_OFDMRxCRC8Er 0x17c
+#define rPMAC_CCKCRxRC16Er 0x180
+#define rPMAC_CCKCRxRC32Er 0x184
+#define rPMAC_CCKCRxRC32OK 0x188
+#define rPMAC_TxStatus 0x18c
+
+/* 2. Page2(0x200) */
+/* The following two definition are only used for USB interface. */
+#define RF_BB_CMD_ADDR 0x02c0 /* RF/BB r/w cmd address. */
+#define RF_BB_CMD_DATA 0x02c4 /* RF/BB r/w cmd data. */
+
+/* 3. Page8(0x800) */
+#define rFPGA0_RFMOD 0x800 /* RF mode & CCK TxSC RF BW Setting */
+
+#define rFPGA0_TxInfo 0x804 /* Status report?? */
+#define rFPGA0_PSDFunction 0x808
+
+#define rFPGA0_TxGainStage 0x80c /* Set TX PWR init gain? */
+
+#define rFPGA0_RFTiming1 0x810 /* Useless now */
+#define rFPGA0_RFTiming2 0x814
+
+#define rFPGA0_XA_HSSIParameter1 0x820 /* RF 3 wire register */
+#define rFPGA0_XA_HSSIParameter2 0x824
+#define rFPGA0_XB_HSSIParameter1 0x828
+#define rFPGA0_XB_HSSIParameter2 0x82c
+
+#define rFPGA0_XA_LSSIParameter 0x840
+#define rFPGA0_XB_LSSIParameter 0x844
+
+#define rFPGA0_RFWakeUpParameter 0x850 /* Useless now */
+#define rFPGA0_RFSleepUpParameter 0x854
+
+#define rFPGA0_XAB_SwitchControl 0x858 /* RF Channel switch */
+#define rFPGA0_XCD_SwitchControl 0x85c
+
+#define rFPGA0_XA_RFInterfaceOE 0x860 /* RF Channel switch */
+#define rFPGA0_XB_RFInterfaceOE 0x864
+
+#define rFPGA0_XAB_RFInterfaceSW 0x870 /* RF Iface Software Control */
+#define rFPGA0_XCD_RFInterfaceSW 0x874
+
+#define rFPGA0_XAB_RFParameter 0x878 /* RF Parameter */
+#define rFPGA0_XCD_RFParameter 0x87c
+
+/* Crystal cap setting RF-R/W protection for parameter4?? */
+#define rFPGA0_AnalogParameter1 0x880
+#define rFPGA0_AnalogParameter2 0x884
+#define rFPGA0_AnalogParameter3 0x888
+/* enable ad/da clock1 for dual-phy */
+#define rFPGA0_AdDaClockEn 0x888
+#define rFPGA0_AnalogParameter4 0x88c
+
+#define rFPGA0_XA_LSSIReadBack 0x8a0 /* Tranceiver LSSI Readback */
+#define rFPGA0_XB_LSSIReadBack 0x8a4
+#define rFPGA0_XC_LSSIReadBack 0x8a8
+#define rFPGA0_XD_LSSIReadBack 0x8ac
+
+#define rFPGA0_PSDReport 0x8b4 /* Useless now */
+/* Transceiver A HSPI Readback */
+#define TransceiverA_HSPI_Readback 0x8b8
+/* Transceiver B HSPI Readback */
+#define TransceiverB_HSPI_Readback 0x8bc
+/* Useless now RF Interface Readback Value */
+#define rFPGA0_XAB_RFInterfaceRB 0x8e0
+#define rFPGA0_XCD_RFInterfaceRB 0x8e4 /* Useless now */
+
+/* 4. Page9(0x900) */
+/* RF mode & OFDM TxSC RF BW Setting?? */
+#define rFPGA1_RFMOD 0x900
+
+#define rFPGA1_TxBlock 0x904 /* Useless now */
+#define rFPGA1_DebugSelect 0x908 /* Useless now */
+#define rFPGA1_TxInfo 0x90c /* Useless now Status report */
+
+/* 5. PageA(0xA00) */
+/* Set Control channel to upper or lower - required only for 40MHz */
+#define rCCK0_System 0xa00
+
+/* Disable init gain now Select RX path by RSSI */
+#define rCCK0_AFESetting 0xa04
+/* Disable init gain now Init gain */
+#define rCCK0_CCA 0xa08
+
+/* AGC default value, saturation level Antenna Diversity, RX AGC, LNA Threshold,
+ * RX LNA Threshold useless now. Not the same as 90 series */
+#define rCCK0_RxAGC1 0xa0c
+#define rCCK0_RxAGC2 0xa10 /* AGC & DAGC */
+
+#define rCCK0_RxHP 0xa14
+
+/* Timing recovery & Channel estimation threshold */
+#define rCCK0_DSPParameter1 0xa18
+#define rCCK0_DSPParameter2 0xa1c /* SQ threshold */
+
+#define rCCK0_TxFilter1 0xa20
+#define rCCK0_TxFilter2 0xa24
+#define rCCK0_DebugPort 0xa28 /* debug port and Tx filter3 */
+#define rCCK0_FalseAlarmReport 0xa2c /* 0xa2d useless now */
+#define rCCK0_TRSSIReport 0xa50
+#define rCCK0_RxReport 0xa54 /* 0xa57 */
+#define rCCK0_FACounterLower 0xa5c /* 0xa5b */
+#define rCCK0_FACounterUpper 0xa58 /* 0xa5c */
+
+/* */
+/* PageB(0xB00) */
+/* */
+#define rPdp_AntA 0xb00
+#define rPdp_AntA_4 0xb04
+#define rConfig_Pmpd_AntA 0xb28
+#define rConfig_AntA 0xb68
+#define rConfig_AntB 0xb6c
+#define rPdp_AntB 0xb70
+#define rPdp_AntB_4 0xb74
+#define rConfig_Pmpd_AntB 0xb98
+#define rAPK 0xbd8
+
+/* */
+/* 6. PageC(0xC00) */
+/* */
+#define rOFDM0_LSTF 0xc00
+
+#define rOFDM0_TRxPathEnable 0xc04
+#define rOFDM0_TRMuxPar 0xc08
+#define rOFDM0_TRSWIsolation 0xc0c
+
+/* RxIQ DC offset, Rx digital filter, DC notch filter */
+#define rOFDM0_XARxAFE 0xc10
+#define rOFDM0_XARxIQImbalance 0xc14 /* RxIQ imblance matrix */
+#define rOFDM0_XBRxAFE 0xc18
+#define rOFDM0_XBRxIQImbalance 0xc1c
+#define rOFDM0_XCRxAFE 0xc20
+#define rOFDM0_XCRxIQImbalance 0xc24
+#define rOFDM0_XDRxAFE 0xc28
+#define rOFDM0_XDRxIQImbalance 0xc2c
+
+#define rOFDM0_RxDetector1 0xc30 /*PD,BW & SBD DM tune init gain*/
+#define rOFDM0_RxDetector2 0xc34 /* SBD & Fame Sync. */
+#define rOFDM0_RxDetector3 0xc38 /* Frame Sync. */
+#define rOFDM0_RxDetector4 0xc3c /* PD, SBD, Frame Sync & Short-GI */
+
+#define rOFDM0_RxDSP 0xc40 /* Rx Sync Path */
+#define rOFDM0_CFOandDAGC 0xc44 /* CFO & DAGC */
+#define rOFDM0_CCADropThreshold 0xc48 /* CCA Drop threshold */
+#define rOFDM0_ECCAThreshold 0xc4c /* energy CCA */
+
+#define rOFDM0_XAAGCCore1 0xc50 /* DIG */
+#define rOFDM0_XAAGCCore2 0xc54
+#define rOFDM0_XBAGCCore1 0xc58
+#define rOFDM0_XBAGCCore2 0xc5c
+#define rOFDM0_XCAGCCore1 0xc60
+#define rOFDM0_XCAGCCore2 0xc64
+#define rOFDM0_XDAGCCore1 0xc68
+#define rOFDM0_XDAGCCore2 0xc6c
+
+#define rOFDM0_AGCParameter1 0xc70
+#define rOFDM0_AGCParameter2 0xc74
+#define rOFDM0_AGCRSSITable 0xc78
+#define rOFDM0_HTSTFAGC 0xc7c
+
+#define rOFDM0_XATxIQImbalance 0xc80 /* TX PWR TRACK and DIG */
+#define rOFDM0_XATxAFE 0xc84
+#define rOFDM0_XBTxIQImbalance 0xc88
+#define rOFDM0_XBTxAFE 0xc8c
+#define rOFDM0_XCTxIQImbalance 0xc90
+#define rOFDM0_XCTxAFE 0xc94
+#define rOFDM0_XDTxIQImbalance 0xc98
+#define rOFDM0_XDTxAFE 0xc9c
+
+#define rOFDM0_RxIQExtAnta 0xca0
+#define rOFDM0_TxCoeff1 0xca4
+#define rOFDM0_TxCoeff2 0xca8
+#define rOFDM0_TxCoeff3 0xcac
+#define rOFDM0_TxCoeff4 0xcb0
+#define rOFDM0_TxCoeff5 0xcb4
+#define rOFDM0_TxCoeff6 0xcb8
+#define rOFDM0_RxHPParameter 0xce0
+#define rOFDM0_TxPseudoNoiseWgt 0xce4
+#define rOFDM0_FrameSync 0xcf0
+#define rOFDM0_DFSReport 0xcf4
+
+/* */
+/* 7. PageD(0xD00) */
+/* */
+#define rOFDM1_LSTF 0xd00
+#define rOFDM1_TRxPathEnable 0xd04
+
+#define rOFDM1_CFO 0xd08 /* No setting now */
+#define rOFDM1_CSI1 0xd10
+#define rOFDM1_SBD 0xd14
+#define rOFDM1_CSI2 0xd18
+#define rOFDM1_CFOTracking 0xd2c
+#define rOFDM1_TRxMesaure1 0xd34
+#define rOFDM1_IntfDet 0xd3c
+#define rOFDM1_PseudoNoiseStateAB 0xd50
+#define rOFDM1_PseudoNoiseStateCD 0xd54
+#define rOFDM1_RxPseudoNoiseWgt 0xd58
+
+#define rOFDM_PHYCounter1 0xda0 /* cca, parity fail */
+#define rOFDM_PHYCounter2 0xda4 /* rate illegal, crc8 fail */
+#define rOFDM_PHYCounter3 0xda8 /* MCS not support */
+
+#define rOFDM_ShortCFOAB 0xdac /* No setting now */
+#define rOFDM_ShortCFOCD 0xdb0
+#define rOFDM_LongCFOAB 0xdb4
+#define rOFDM_LongCFOCD 0xdb8
+#define rOFDM_TailCFOAB 0xdbc
+#define rOFDM_TailCFOCD 0xdc0
+#define rOFDM_PWMeasure1 0xdc4
+#define rOFDM_PWMeasure2 0xdc8
+#define rOFDM_BWReport 0xdcc
+#define rOFDM_AGCReport 0xdd0
+#define rOFDM_RxSNR 0xdd4
+#define rOFDM_RxEVMCSI 0xdd8
+#define rOFDM_SIGReport 0xddc
+
+/* */
+/* 8. PageE(0xE00) */
+/* */
+#define rTxAGC_A_Rate18_06 0xe00
+#define rTxAGC_A_Rate54_24 0xe04
+#define rTxAGC_A_CCK1_Mcs32 0xe08
+#define rTxAGC_A_Mcs03_Mcs00 0xe10
+#define rTxAGC_A_Mcs07_Mcs04 0xe14
+#define rTxAGC_A_Mcs11_Mcs08 0xe18
+#define rTxAGC_A_Mcs15_Mcs12 0xe1c
+
+#define rTxAGC_B_Rate18_06 0x830
+#define rTxAGC_B_Rate54_24 0x834
+#define rTxAGC_B_CCK1_55_Mcs32 0x838
+#define rTxAGC_B_Mcs03_Mcs00 0x83c
+#define rTxAGC_B_Mcs07_Mcs04 0x848
+#define rTxAGC_B_Mcs11_Mcs08 0x84c
+#define rTxAGC_B_Mcs15_Mcs12 0x868
+#define rTxAGC_B_CCK11_A_CCK2_11 0x86c
+
+#define rFPGA0_IQK 0xe28
+#define rTx_IQK_Tone_A 0xe30
+#define rRx_IQK_Tone_A 0xe34
+#define rTx_IQK_PI_A 0xe38
+#define rRx_IQK_PI_A 0xe3c
+
+#define rTx_IQK 0xe40
+#define rRx_IQK 0xe44
+#define rIQK_AGC_Pts 0xe48
+#define rIQK_AGC_Rsp 0xe4c
+#define rTx_IQK_Tone_B 0xe50
+#define rRx_IQK_Tone_B 0xe54
+#define rTx_IQK_PI_B 0xe58
+#define rRx_IQK_PI_B 0xe5c
+#define rIQK_AGC_Cont 0xe60
+
+#define rBlue_Tooth 0xe6c
+#define rRx_Wait_CCA 0xe70
+#define rTx_CCK_RFON 0xe74
+#define rTx_CCK_BBON 0xe78
+#define rTx_OFDM_RFON 0xe7c
+#define rTx_OFDM_BBON 0xe80
+#define rTx_To_Rx 0xe84
+#define rTx_To_Tx 0xe88
+#define rRx_CCK 0xe8c
+
+#define rTx_Power_Before_IQK_A 0xe94
+#define rTx_Power_After_IQK_A 0xe9c
+
+#define rRx_Power_Before_IQK_A 0xea0
+#define rRx_Power_Before_IQK_A_2 0xea4
+#define rRx_Power_After_IQK_A 0xea8
+#define rRx_Power_After_IQK_A_2 0xeac
+
+#define rTx_Power_Before_IQK_B 0xeb4
+#define rTx_Power_After_IQK_B 0xebc
+
+#define rRx_Power_Before_IQK_B 0xec0
+#define rRx_Power_Before_IQK_B_2 0xec4
+#define rRx_Power_After_IQK_B 0xec8
+#define rRx_Power_After_IQK_B_2 0xecc
+
+#define rRx_OFDM 0xed0
+#define rRx_Wait_RIFS 0xed4
+#define rRx_TO_Rx 0xed8
+#define rStandby 0xedc
+#define rSleep 0xee0
+#define rPMPD_ANAEN 0xeec
+
+/* */
+/* 7. RF Register 0x00-0x2E (RF 8256) */
+/* RF-0222D 0x00-3F */
+/* */
+/* Zebra1 */
+#define rZebra1_HSSIEnable 0x0 /* Useless now */
+#define rZebra1_TRxEnable1 0x1
+#define rZebra1_TRxEnable2 0x2
+#define rZebra1_AGC 0x4
+#define rZebra1_ChargePump 0x5
+#define rZebra1_Channel 0x7 /* RF channel switch */
+
+/* endif */
+#define rZebra1_TxGain 0x8 /* Useless now */
+#define rZebra1_TxLPF 0x9
+#define rZebra1_RxLPF 0xb
+#define rZebra1_RxHPFCorner 0xc
+
+/* Zebra4 */
+#define rGlobalCtrl 0 /* Useless now */
+#define rRTL8256_TxLPF 19
+#define rRTL8256_RxLPF 11
+
+/* RTL8258 */
+#define rRTL8258_TxLPF 0x11 /* Useless now */
+#define rRTL8258_RxLPF 0x13
+#define rRTL8258_RSSILPF 0xa
+
+/* */
+/* RL6052 Register definition */
+/* */
+#define RF_AC 0x00 /* */
+
+#define RF_IQADJ_G1 0x01 /* */
+#define RF_IQADJ_G2 0x02 /* */
+
+#define RF_POW_TRSW 0x05 /* */
+
+#define RF_GAIN_RX 0x06 /* */
+#define RF_GAIN_TX 0x07 /* */
+
+#define RF_TXM_IDAC 0x08 /* */
+#define RF_IPA_G 0x09 /* */
+#define RF_TXBIAS_G 0x0A
+#define RF_TXPA_AG 0x0B
+#define RF_IPA_A 0x0C /* */
+#define RF_TXBIAS_A 0x0D
+#define RF_BS_PA_APSET_G9_G11 0x0E
+#define RF_BS_IQGEN 0x0F /* */
+
+#define RF_MODE1 0x10 /* */
+#define RF_MODE2 0x11 /* */
+
+#define RF_RX_AGC_HP 0x12 /* */
+#define RF_TX_AGC 0x13 /* */
+#define RF_BIAS 0x14 /* */
+#define RF_IPA 0x15 /* */
+#define RF_TXBIAS 0x16
+#define RF_POW_ABILITY 0x17 /* */
+#define RF_CHNLBW 0x18 /* RF channel and BW switch */
+#define RF_TOP 0x19 /* */
+
+#define RF_RX_G1 0x1A /* */
+#define RF_RX_G2 0x1B /* */
+
+#define RF_RX_BB2 0x1C /* */
+#define RF_RX_BB1 0x1D /* */
+
+#define RF_RCK1 0x1E /* */
+#define RF_RCK2 0x1F /* */
+
+#define RF_TX_G1 0x20 /* */
+#define RF_TX_G2 0x21 /* */
+#define RF_TX_G3 0x22 /* */
+
+#define RF_TX_BB1 0x23 /* */
+
+#define RF_T_METER_92D 0x42 /* */
+#define RF_T_METER_88E 0x42 /* */
+#define RF_T_METER 0x24 /* */
+
+#define RF_SYN_G1 0x25 /* RF TX Power control */
+#define RF_SYN_G2 0x26 /* RF TX Power control */
+#define RF_SYN_G3 0x27 /* RF TX Power control */
+#define RF_SYN_G4 0x28 /* RF TX Power control */
+#define RF_SYN_G5 0x29 /* RF TX Power control */
+#define RF_SYN_G6 0x2A /* RF TX Power control */
+#define RF_SYN_G7 0x2B /* RF TX Power control */
+#define RF_SYN_G8 0x2C /* RF TX Power control */
+
+#define RF_RCK_OS 0x30 /* RF TX PA control */
+#define RF_TXPA_G1 0x31 /* RF TX PA control */
+#define RF_TXPA_G2 0x32 /* RF TX PA control */
+#define RF_TXPA_G3 0x33 /* RF TX PA control */
+#define RF_TX_BIAS_A 0x35
+#define RF_TX_BIAS_D 0x36
+#define RF_LOBF_9 0x38
+#define RF_RXRF_A3 0x3C /* */
+#define RF_TRSW 0x3F
+
+#define RF_TXRF_A2 0x41
+#define RF_TXPA_G4 0x46
+#define RF_TXPA_A4 0x4B
+#define RF_0x52 0x52
+#define RF_WE_LUT 0xEF
+
+/* */
+/* Bit Mask */
+/* */
+/* 1. Page1(0x100) */
+#define bBBResetB 0x100 /* Useless now? */
+#define bGlobalResetB 0x200
+#define bOFDMTxStart 0x4
+#define bCCKTxStart 0x8
+#define bCRC32Debug 0x100
+#define bPMACLoopback 0x10
+#define bTxLSIG 0xffffff
+#define bOFDMTxRate 0xf
+#define bOFDMTxReserved 0x10
+#define bOFDMTxLength 0x1ffe0
+#define bOFDMTxParity 0x20000
+#define bTxHTSIG1 0xffffff
+#define bTxHTMCSRate 0x7f
+#define bTxHTBW 0x80
+#define bTxHTLength 0xffff00
+#define bTxHTSIG2 0xffffff
+#define bTxHTSmoothing 0x1
+#define bTxHTSounding 0x2
+#define bTxHTReserved 0x4
+#define bTxHTAggreation 0x8
+#define bTxHTSTBC 0x30
+#define bTxHTAdvanceCoding 0x40
+#define bTxHTShortGI 0x80
+#define bTxHTNumberHT_LTF 0x300
+#define bTxHTCRC8 0x3fc00
+#define bCounterReset 0x10000
+#define bNumOfOFDMTx 0xffff
+#define bNumOfCCKTx 0xffff0000
+#define bTxIdleInterval 0xffff
+#define bOFDMService 0xffff0000
+#define bTxMACHeader 0xffffffff
+#define bTxDataInit 0xff
+#define bTxHTMode 0x100
+#define bTxDataType 0x30000
+#define bTxRandomSeed 0xffffffff
+#define bCCKTxPreamble 0x1
+#define bCCKTxSFD 0xffff0000
+#define bCCKTxSIG 0xff
+#define bCCKTxService 0xff00
+#define bCCKLengthExt 0x8000
+#define bCCKTxLength 0xffff0000
+#define bCCKTxCRC16 0xffff
+#define bCCKTxStatus 0x1
+#define bOFDMTxStatus 0x2
+
+#define IS_BB_REG_OFFSET_92S(_Offset) \
+ ((_Offset >= 0x800) && (_Offset <= 0xfff))
+
+/* 2. Page8(0x800) */
+#define bRFMOD 0x1 /* Reg 0x800 rFPGA0_RFMOD */
+#define bJapanMode 0x2
+#define bCCKTxSC 0x30
+#define bCCKEn 0x1000000
+#define bOFDMEn 0x2000000
+
+#define bOFDMRxADCPhase 0x10000 /* Useless now */
+#define bOFDMTxDACPhase 0x40000
+#define bXATxAGC 0x3f
+
+#define bAntennaSelect 0x0300
+
+#define bXBTxAGC 0xf00 /* Reg 80c rFPGA0_TxGainStage */
+#define bXCTxAGC 0xf000
+#define bXDTxAGC 0xf0000
+
+#define bPAStart 0xf0000000 /* Useless now */
+#define bTRStart 0x00f00000
+#define bRFStart 0x0000f000
+#define bBBStart 0x000000f0
+#define bBBCCKStart 0x0000000f
+#define bPAEnd 0xf /* Reg0x814 */
+#define bTREnd 0x0f000000
+#define bRFEnd 0x000f0000
+#define bCCAMask 0x000000f0 /* T2R */
+#define bR2RCCAMask 0x00000f00
+#define bHSSI_R2TDelay 0xf8000000
+#define bHSSI_T2RDelay 0xf80000
+#define bContTxHSSI 0x400 /* change gain at continue Tx */
+#define bIGFromCCK 0x200
+#define bAGCAddress 0x3f
+#define bRxHPTx 0x7000
+#define bRxHPT2R 0x38000
+#define bRxHPCCKIni 0xc0000
+#define bAGCTxCode 0xc00000
+#define bAGCRxCode 0x300000
+
+/* Reg 0x820~84f rFPGA0_XA_HSSIParameter1 */
+#define b3WireDataLength 0x800
+#define b3WireAddressLength 0x400
+
+#define b3WireRFPowerDown 0x1 /* Useless now */
+#define b5GPAPEPolarity 0x40000000
+#define b2GPAPEPolarity 0x80000000
+#define bRFSW_TxDefaultAnt 0x3
+#define bRFSW_TxOptionAnt 0x30
+#define bRFSW_RxDefaultAnt 0x300
+#define bRFSW_RxOptionAnt 0x3000
+#define bRFSI_3WireData 0x1
+#define bRFSI_3WireClock 0x2
+#define bRFSI_3WireLoad 0x4
+#define bRFSI_3WireRW 0x8
+#define bRFSI_3Wire 0xf
+
+#define bRFSI_RFENV 0x10 /* Reg 0x870 rFPGA0_XAB_RFInterfaceSW */
+
+#define bRFSI_TRSW 0x20 /* Useless now */
+#define bRFSI_TRSWB 0x40
+#define bRFSI_ANTSW 0x100
+#define bRFSI_ANTSWB 0x200
+#define bRFSI_PAPE 0x400
+#define bRFSI_PAPE5G 0x800
+#define bBandSelect 0x1
+#define bHTSIG2_GI 0x80
+#define bHTSIG2_Smoothing 0x01
+#define bHTSIG2_Sounding 0x02
+#define bHTSIG2_Aggreaton 0x08
+#define bHTSIG2_STBC 0x30
+#define bHTSIG2_AdvCoding 0x40
+#define bHTSIG2_NumOfHTLTF 0x300
+#define bHTSIG2_CRC8 0x3fc
+#define bHTSIG1_MCS 0x7f
+#define bHTSIG1_BandWidth 0x80
+#define bHTSIG1_HTLength 0xffff
+#define bLSIG_Rate 0xf
+#define bLSIG_Reserved 0x10
+#define bLSIG_Length 0x1fffe
+#define bLSIG_Parity 0x20
+#define bCCKRxPhase 0x4
+
+#define bLSSIReadAddress 0x7f800000 /* T65 RF */
+
+#define bLSSIReadEdge 0x80000000 /* LSSI "Read" edge signal */
+
+#define bLSSIReadBackData 0xfffff /* T65 RF */
+
+#define bLSSIReadOKFlag 0x1000 /* Useless now */
+#define bCCKSampleRate 0x8 /* 0: 44MHz, 1:88MHz */
+#define bRegulator0Standby 0x1
+#define bRegulatorPLLStandby 0x2
+#define bRegulator1Standby 0x4
+#define bPLLPowerUp 0x8
+#define bDPLLPowerUp 0x10
+#define bDA10PowerUp 0x20
+#define bAD7PowerUp 0x200
+#define bDA6PowerUp 0x2000
+#define bXtalPowerUp 0x4000
+#define b40MDClkPowerUP 0x8000
+#define bDA6DebugMode 0x20000
+#define bDA6Swing 0x380000
+
+/* Reg 0x880 rFPGA0_AnalogParameter1 20/40 CCK support switch 40/80 BB MHZ */
+#define bADClkPhase 0x4000000
+
+#define b80MClkDelay 0x18000000 /* Useless */
+#define bAFEWatchDogEnable 0x20000000
+
+/* Reg 0x884 rFPGA0_AnalogParameter2 Crystal cap */
+#define bXtalCap01 0xc0000000
+#define bXtalCap23 0x3
+#define bXtalCap92x 0x0f000000
+#define bXtalCap 0x0f000000
+
+#define bIntDifClkEnable 0x400 /* Useless */
+#define bExtSigClkEnable 0x800
+#define bBandgapMbiasPowerUp 0x10000
+#define bAD11SHGain 0xc0000
+#define bAD11InputRange 0x700000
+#define bAD11OPCurrent 0x3800000
+#define bIPathLoopback 0x4000000
+#define bQPathLoopback 0x8000000
+#define bAFELoopback 0x10000000
+#define bDA10Swing 0x7e0
+#define bDA10Reverse 0x800
+#define bDAClkSource 0x1000
+#define bAD7InputRange 0x6000
+#define bAD7Gain 0x38000
+#define bAD7OutputCMMode 0x40000
+#define bAD7InputCMMode 0x380000
+#define bAD7Current 0xc00000
+#define bRegulatorAdjust 0x7000000
+#define bAD11PowerUpAtTx 0x1
+#define bDA10PSAtTx 0x10
+#define bAD11PowerUpAtRx 0x100
+#define bDA10PSAtRx 0x1000
+#define bCCKRxAGCFormat 0x200
+#define bPSDFFTSamplepPoint 0xc000
+#define bPSDAverageNum 0x3000
+#define bIQPathControl 0xc00
+#define bPSDFreq 0x3ff
+#define bPSDAntennaPath 0x30
+#define bPSDIQSwitch 0x40
+#define bPSDRxTrigger 0x400000
+#define bPSDTxTrigger 0x80000000
+#define bPSDSineToneScale 0x7f000000
+#define bPSDReport 0xffff
+
+/* 3. Page9(0x900) */
+#define bOFDMTxSC 0x30000000 /* Useless */
+#define bCCKTxOn 0x1
+#define bOFDMTxOn 0x2
+#define bDebugPage 0xfff /* reset debug page and HWord, LWord */
+#define bDebugItem 0xff /* reset debug page and LWord */
+#define bAntL 0x10
+#define bAntNonHT 0x100
+#define bAntHT1 0x1000
+#define bAntHT2 0x10000
+#define bAntHT1S1 0x100000
+#define bAntNonHTS1 0x1000000
+
+/* 4. PageA(0xA00) */
+#define bCCKBBMode 0x3 /* Useless */
+#define bCCKTxPowerSaving 0x80
+#define bCCKRxPowerSaving 0x40
+
+#define bCCKSideBand 0x10 /* Reg 0xa00 rCCK0_System 20/40 */
+
+#define bCCKScramble 0x8 /* Useless */
+#define bCCKAntDiversity 0x8000
+#define bCCKCarrierRecovery 0x4000
+#define bCCKTxRate 0x3000
+#define bCCKDCCancel 0x0800
+#define bCCKISICancel 0x0400
+#define bCCKMatchFilter 0x0200
+#define bCCKEqualizer 0x0100
+#define bCCKPreambleDetect 0x800000
+#define bCCKFastFalseCCA 0x400000
+#define bCCKChEstStart 0x300000
+#define bCCKCCACount 0x080000
+#define bCCKcs_lim 0x070000
+#define bCCKBistMode 0x80000000
+#define bCCKCCAMask 0x40000000
+#define bCCKTxDACPhase 0x4
+#define bCCKRxADCPhase 0x20000000 /* r_rx_clk */
+#define bCCKr_cp_mode0 0x0100
+#define bCCKTxDCOffset 0xf0
+#define bCCKRxDCOffset 0xf
+#define bCCKCCAMode 0xc000
+#define bCCKFalseCS_lim 0x3f00
+#define bCCKCS_ratio 0xc00000
+#define bCCKCorgBit_sel 0x300000
+#define bCCKPD_lim 0x0f0000
+#define bCCKNewCCA 0x80000000
+#define bCCKRxHPofIG 0x8000
+#define bCCKRxIG 0x7f00
+#define bCCKLNAPolarity 0x800000
+#define bCCKRx1stGain 0x7f0000
+#define bCCKRFExtend 0x20000000 /* CCK Rx Iinital gain polarity */
+#define bCCKRxAGCSatLevel 0x1f000000
+#define bCCKRxAGCSatCount 0xe0
+#define bCCKRxRFSettle 0x1f /* AGCsamp_dly */
+#define bCCKFixedRxAGC 0x8000
+#define bCCKAntennaPolarity 0x2000
+#define bCCKTxFilterType 0x0c00
+#define bCCKRxAGCReportType 0x0300
+#define bCCKRxDAGCEn 0x80000000
+#define bCCKRxDAGCPeriod 0x20000000
+#define bCCKRxDAGCSatLevel 0x1f000000
+#define bCCKTimingRecovery 0x800000
+#define bCCKTxC0 0x3f0000
+#define bCCKTxC1 0x3f000000
+#define bCCKTxC2 0x3f
+#define bCCKTxC3 0x3f00
+#define bCCKTxC4 0x3f0000
+#define bCCKTxC5 0x3f000000
+#define bCCKTxC6 0x3f
+#define bCCKTxC7 0x3f00
+#define bCCKDebugPort 0xff0000
+#define bCCKDACDebug 0x0f000000
+#define bCCKFalseAlarmEnable 0x8000
+#define bCCKFalseAlarmRead 0x4000
+#define bCCKTRSSI 0x7f
+#define bCCKRxAGCReport 0xfe
+#define bCCKRxReport_AntSel 0x80000000
+#define bCCKRxReport_MFOff 0x40000000
+#define bCCKRxRxReport_SQLoss 0x20000000
+#define bCCKRxReport_Pktloss 0x10000000
+#define bCCKRxReport_Lockedbit 0x08000000
+#define bCCKRxReport_RateError 0x04000000
+#define bCCKRxReport_RxRate 0x03000000
+#define bCCKRxFACounterLower 0xff
+#define bCCKRxFACounterUpper 0xff000000
+#define bCCKRxHPAGCStart 0xe000
+#define bCCKRxHPAGCFinal 0x1c00
+#define bCCKRxFalseAlarmEnable 0x8000
+#define bCCKFACounterFreeze 0x4000
+#define bCCKTxPathSel 0x10000000
+#define bCCKDefaultRxPath 0xc000000
+#define bCCKOptionRxPath 0x3000000
+
+/* 5. PageC(0xC00) */
+#define bNumOfSTF 0x3 /* Useless */
+#define bShift_L 0xc0
+#define bGI_TH 0xc
+#define bRxPathA 0x1
+#define bRxPathB 0x2
+#define bRxPathC 0x4
+#define bRxPathD 0x8
+#define bTxPathA 0x1
+#define bTxPathB 0x2
+#define bTxPathC 0x4
+#define bTxPathD 0x8
+#define bTRSSIFreq 0x200
+#define bADCBackoff 0x3000
+#define bDFIRBackoff 0xc000
+#define bTRSSILatchPhase 0x10000
+#define bRxIDCOffset 0xff
+#define bRxQDCOffset 0xff00
+#define bRxDFIRMode 0x1800000
+#define bRxDCNFType 0xe000000
+#define bRXIQImb_A 0x3ff
+#define bRXIQImb_B 0xfc00
+#define bRXIQImb_C 0x3f0000
+#define bRXIQImb_D 0xffc00000
+#define bDC_dc_Notch 0x60000
+#define bRxNBINotch 0x1f000000
+#define bPD_TH 0xf
+#define bPD_TH_Opt2 0xc000
+#define bPWED_TH 0x700
+#define bIfMF_Win_L 0x800
+#define bPD_Option 0x1000
+#define bMF_Win_L 0xe000
+#define bBW_Search_L 0x30000
+#define bwin_enh_L 0xc0000
+#define bBW_TH 0x700000
+#define bED_TH2 0x3800000
+#define bBW_option 0x4000000
+#define bRatio_TH 0x18000000
+#define bWindow_L 0xe0000000
+#define bSBD_Option 0x1
+#define bFrame_TH 0x1c
+#define bFS_Option 0x60
+#define bDC_Slope_check 0x80
+#define bFGuard_Counter_DC_L 0xe00
+#define bFrame_Weight_Short 0x7000
+#define bSub_Tune 0xe00000
+#define bFrame_DC_Length 0xe000000
+#define bSBD_start_offset 0x30000000
+#define bFrame_TH_2 0x7
+#define bFrame_GI2_TH 0x38
+#define bGI2_Sync_en 0x40
+#define bSarch_Short_Early 0x300
+#define bSarch_Short_Late 0xc00
+#define bSarch_GI2_Late 0x70000
+#define bCFOAntSum 0x1
+#define bCFOAcc 0x2
+#define bCFOStartOffset 0xc
+#define bCFOLookBack 0x70
+#define bCFOSumWeight 0x80
+#define bDAGCEnable 0x10000
+#define bTXIQImb_A 0x3ff
+#define bTXIQImb_B 0xfc00
+#define bTXIQImb_C 0x3f0000
+#define bTXIQImb_D 0xffc00000
+#define bTxIDCOffset 0xff
+#define bTxQDCOffset 0xff00
+#define bTxDFIRMode 0x10000
+#define bTxPesudoNoiseOn 0x4000000
+#define bTxPesudoNoise_A 0xff
+#define bTxPesudoNoise_B 0xff00
+#define bTxPesudoNoise_C 0xff0000
+#define bTxPesudoNoise_D 0xff000000
+#define bCCADropOption 0x20000
+#define bCCADropThres 0xfff00000
+#define bEDCCA_H 0xf
+#define bEDCCA_L 0xf0
+#define bLambda_ED 0x300
+#define bRxInitialGain 0x7f
+#define bRxAntDivEn 0x80
+#define bRxAGCAddressForLNA 0x7f00
+#define bRxHighPowerFlow 0x8000
+#define bRxAGCFreezeThres 0xc0000
+#define bRxFreezeStep_AGC1 0x300000
+#define bRxFreezeStep_AGC2 0xc00000
+#define bRxFreezeStep_AGC3 0x3000000
+#define bRxFreezeStep_AGC0 0xc000000
+#define bRxRssi_Cmp_En 0x10000000
+#define bRxQuickAGCEn 0x20000000
+#define bRxAGCFreezeThresMode 0x40000000
+#define bRxOverFlowCheckType 0x80000000
+#define bRxAGCShift 0x7f
+#define bTRSW_Tri_Only 0x80
+#define bPowerThres 0x300
+#define bRxAGCEn 0x1
+#define bRxAGCTogetherEn 0x2
+#define bRxAGCMin 0x4
+#define bRxHP_Ini 0x7
+#define bRxHP_TRLNA 0x70
+#define bRxHP_RSSI 0x700
+#define bRxHP_BBP1 0x7000
+#define bRxHP_BBP2 0x70000
+#define bRxHP_BBP3 0x700000
+#define bRSSI_H 0x7f0000 /* threshold for high power */
+#define bRSSI_Gen 0x7f000000 /* threshold for ant diversity */
+#define bRxSettle_TRSW 0x7
+#define bRxSettle_LNA 0x38
+#define bRxSettle_RSSI 0x1c0
+#define bRxSettle_BBP 0xe00
+#define bRxSettle_RxHP 0x7000
+#define bRxSettle_AntSW_RSSI 0x38000
+#define bRxSettle_AntSW 0xc0000
+#define bRxProcessTime_DAGC 0x300000
+#define bRxSettle_HSSI 0x400000
+#define bRxProcessTime_BBPPW 0x800000
+#define bRxAntennaPowerShift 0x3000000
+#define bRSSITableSelect 0xc000000
+#define bRxHP_Final 0x7000000
+#define bRxHTSettle_BBP 0x7
+#define bRxHTSettle_HSSI 0x8
+#define bRxHTSettle_RxHP 0x70
+#define bRxHTSettle_BBPPW 0x80
+#define bRxHTSettle_Idle 0x300
+#define bRxHTSettle_Reserved 0x1c00
+#define bRxHTRxHPEn 0x8000
+#define bRxHTAGCFreezeThres 0x30000
+#define bRxHTAGCTogetherEn 0x40000
+#define bRxHTAGCMin 0x80000
+#define bRxHTAGCEn 0x100000
+#define bRxHTDAGCEn 0x200000
+#define bRxHTRxHP_BBP 0x1c00000
+#define bRxHTRxHP_Final 0xe0000000
+#define bRxPWRatioTH 0x3
+#define bRxPWRatioEn 0x4
+#define bRxMFHold 0x3800
+#define bRxPD_Delay_TH1 0x38
+#define bRxPD_Delay_TH2 0x1c0
+#define bRxPD_DC_COUNT_MAX 0x600
+#define bRxPD_Delay_TH 0x8000
+#define bRxProcess_Delay 0xf0000
+#define bRxSearchrange_GI2_Early 0x700000
+#define bRxFrame_Guard_Counter_L 0x3800000
+#define bRxSGI_Guard_L 0xc000000
+#define bRxSGI_Search_L 0x30000000
+#define bRxSGI_TH 0xc0000000
+#define bDFSCnt0 0xff
+#define bDFSCnt1 0xff00
+#define bDFSFlag 0xf0000
+#define bMFWeightSum 0x300000
+#define bMinIdxTH 0x7f000000
+#define bDAFormat 0x40000
+#define bTxChEmuEnable 0x01000000
+#define bTRSWIsolation_A 0x7f
+#define bTRSWIsolation_B 0x7f00
+#define bTRSWIsolation_C 0x7f0000
+#define bTRSWIsolation_D 0x7f000000
+#define bExtLNAGain 0x7c00
+
+/* 6. PageE(0xE00) */
+#define bSTBCEn 0x4 /* Useless */
+#define bAntennaMapping 0x10
+#define bNss 0x20
+#define bCFOAntSumD 0x200
+#define bPHYCounterReset 0x8000000
+#define bCFOReportGet 0x4000000
+#define bOFDMContinueTx 0x10000000
+#define bOFDMSingleCarrier 0x20000000
+#define bOFDMSingleTone 0x40000000
+#define bHTDetect 0x100
+#define bCFOEn 0x10000
+#define bCFOValue 0xfff00000
+#define bSigTone_Re 0x3f
+#define bSigTone_Im 0x7f00
+#define bCounter_CCA 0xffff
+#define bCounter_ParityFail 0xffff0000
+#define bCounter_RateIllegal 0xffff
+#define bCounter_CRC8Fail 0xffff0000
+#define bCounter_MCSNoSupport 0xffff
+#define bCounter_FastSync 0xffff
+#define bShortCFO 0xfff
+#define bShortCFOTLength 12 /* total */
+#define bShortCFOFLength 11 /* fraction */
+#define bLongCFO 0x7ff
+#define bLongCFOTLength 11
+#define bLongCFOFLength 11
+#define bTailCFO 0x1fff
+#define bTailCFOTLength 13
+#define bTailCFOFLength 12
+#define bmax_en_pwdB 0xffff
+#define bCC_power_dB 0xffff0000
+#define bnoise_pwdB 0xffff
+#define bPowerMeasTLength 10
+#define bPowerMeasFLength 3
+#define bRx_HT_BW 0x1
+#define bRxSC 0x6
+#define bRx_HT 0x8
+#define bNB_intf_det_on 0x1
+#define bIntf_win_len_cfg 0x30
+#define bNB_Intf_TH_cfg 0x1c0
+#define bRFGain 0x3f
+#define bTableSel 0x40
+#define bTRSW 0x80
+#define bRxSNR_A 0xff
+#define bRxSNR_B 0xff00
+#define bRxSNR_C 0xff0000
+#define bRxSNR_D 0xff000000
+#define bSNREVMTLength 8
+#define bSNREVMFLength 1
+#define bCSI1st 0xff
+#define bCSI2nd 0xff00
+#define bRxEVM1st 0xff0000
+#define bRxEVM2nd 0xff000000
+#define bSIGEVM 0xff
+#define bPWDB 0xff00
+#define bSGIEN 0x10000
+
+#define bSFactorQAM1 0xf /* Useless */
+#define bSFactorQAM2 0xf0
+#define bSFactorQAM3 0xf00
+#define bSFactorQAM4 0xf000
+#define bSFactorQAM5 0xf0000
+#define bSFactorQAM6 0xf0000
+#define bSFactorQAM7 0xf00000
+#define bSFactorQAM8 0xf000000
+#define bSFactorQAM9 0xf0000000
+#define bCSIScheme 0x100000
+
+#define bNoiseLvlTopSet 0x3 /* Useless */
+#define bChSmooth 0x4
+#define bChSmoothCfg1 0x38
+#define bChSmoothCfg2 0x1c0
+#define bChSmoothCfg3 0xe00
+#define bChSmoothCfg4 0x7000
+#define bMRCMode 0x800000
+#define bTHEVMCfg 0x7000000
+
+#define bLoopFitType 0x1 /* Useless */
+#define bUpdCFO 0x40
+#define bUpdCFOOffData 0x80
+#define bAdvUpdCFO 0x100
+#define bAdvTimeCtrl 0x800
+#define bUpdClko 0x1000
+#define bFC 0x6000
+#define bTrackingMode 0x8000
+#define bPhCmpEnable 0x10000
+#define bUpdClkoLTF 0x20000
+#define bComChCFO 0x40000
+#define bCSIEstiMode 0x80000
+#define bAdvUpdEqz 0x100000
+#define bUChCfg 0x7000000
+#define bUpdEqz 0x8000000
+
+/* Rx Pseduo noise */
+#define bRxPesudoNoiseOn 0x20000000 /* Useless */
+#define bRxPesudoNoise_A 0xff
+#define bRxPesudoNoise_B 0xff00
+#define bRxPesudoNoise_C 0xff0000
+#define bRxPesudoNoise_D 0xff000000
+#define bPesudoNoiseState_A 0xffff
+#define bPesudoNoiseState_B 0xffff0000
+#define bPesudoNoiseState_C 0xffff
+#define bPesudoNoiseState_D 0xffff0000
+
+/* 7. RF Register */
+/* Zebra1 */
+#define bZebra1_HSSIEnable 0x8 /* Useless */
+#define bZebra1_TRxControl 0xc00
+#define bZebra1_TRxGainSetting 0x07f
+#define bZebra1_RxCorner 0xc00
+#define bZebra1_TxChargePump 0x38
+#define bZebra1_RxChargePump 0x7
+#define bZebra1_ChannelNum 0xf80
+#define bZebra1_TxLPFBW 0x400
+#define bZebra1_RxLPFBW 0x600
+
+/* Zebra4 */
+#define bRTL8256RegModeCtrl1 0x100 /* Useless */
+#define bRTL8256RegModeCtrl0 0x40
+#define bRTL8256_TxLPFBW 0x18
+#define bRTL8256_RxLPFBW 0x600
+
+/* RTL8258 */
+#define bRTL8258_TxLPFBW 0xc /* Useless */
+#define bRTL8258_RxLPFBW 0xc00
+#define bRTL8258_RSSILPFBW 0xc0
+
+/* */
+/* Other Definition */
+/* */
+
+/* byte endable for sb_write */
+#define bByte0 0x1 /* Useless */
+#define bByte1 0x2
+#define bByte2 0x4
+#define bByte3 0x8
+#define bWord0 0x3
+#define bWord1 0xc
+#define bDWord 0xf
+
+/* for PutRegsetting & GetRegSetting BitMask */
+#define bMaskByte0 0xff /* Reg 0xc50 rOFDM0_XAAGCCore~0xC6f */
+#define bMaskByte1 0xff00
+#define bMaskByte2 0xff0000
+#define bMaskByte3 0xff000000
+#define bMaskHWord 0xffff0000
+#define bMaskLWord 0x0000ffff
+#define bMaskDWord 0xffffffff
+#define bMask12Bits 0xfff
+#define bMaskH4Bits 0xf0000000
+#define bMaskOFDM_D 0xffc00000
+#define bMaskCCK 0x3f3f3f3f
+
+/* for PutRFRegsetting & GetRFRegSetting BitMask */
+#define bRFRegOffsetMask 0xfffff
+
+#define bEnable 0x1 /* Useless */
+#define bDisable 0x0
+
+#define LeftAntenna 0x0 /* Useless */
+#define RightAntenna 0x1
+
+#define tCheckTxStatus 500 /* 500ms Useless */
+#define tUpdateRxCounter 100 /* 100ms */
+
+#define rateCCK 0 /* Useless */
+#define rateOFDM 1
+#define rateHT 2
+
+/* define Register-End */
+#define bPMAC_End 0x1ff /* Useless */
+#define bFPGAPHY0_End 0x8ff
+#define bFPGAPHY1_End 0x9ff
+#define bCCKPHY0_End 0xaff
+#define bOFDMPHY0_End 0xcff
+#define bOFDMPHY1_End 0xdff
+
+#define bPMACControl 0x0 /* Useless */
+#define bWMACControl 0x1
+#define bWNICControl 0x2
+
+#define PathA 0x0 /* Useless */
+#define PathB 0x1
+#define PathC 0x2
+#define PathD 0x3
+
+/*--------------------------Define Parameters-------------------------------*/
+
+#endif
diff --git a/drivers/staging/r8188eu/include/Hal8188EPwrSeq.h b/drivers/staging/r8188eu/include/Hal8188EPwrSeq.h
new file mode 100644
index 000000000000..df151b76f302
--- /dev/null
+++ b/drivers/staging/r8188eu/include/Hal8188EPwrSeq.h
@@ -0,0 +1,173 @@
+
+/******************************************************************************
+ *
+ * Copyright(c) 2007 - 2011 Realtek Corporation. All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of version 2 of the GNU General Public License as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
+ * more details.
+ *
+ * You should have received a copy of the GNU General Public License along with
+ * this program; if not, write to the Free Software Foundation, Inc.,
+ * 51 Franklin Street, Fifth Floor, Boston, MA 02110, USA
+ *
+ *
+ ******************************************************************************/
+
+#ifndef __HAL8188EPWRSEQ_H__
+#define __HAL8188EPWRSEQ_H__
+
+#include "HalPwrSeqCmd.h"
+
+/*
+ Check document WM-20110607-Paul-RTL8188E_Power_Architecture-R02.vsd
+ There are 6 HW Power States:
+ 0: POFF--Power Off
+ 1: PDN--Power Down
+ 2: CARDEMU--Card Emulation
+ 3: ACT--Active Mode
+ 4: LPS--Low Power State
+ 5: SUS--Suspend
+
+ The transision from different states are defined below
+ TRANS_CARDEMU_TO_ACT
+ TRANS_ACT_TO_CARDEMU
+ TRANS_CARDEMU_TO_SUS
+ TRANS_SUS_TO_CARDEMU
+ TRANS_CARDEMU_TO_PDN
+ TRANS_ACT_TO_LPS
+ TRANS_LPS_TO_ACT
+
+ TRANS_END
+
+ PWR SEQ Version: rtl8188E_PwrSeq_V09.h
+*/
+#define RTL8188E_TRANS_CARDEMU_TO_ACT_STEPS 10
+#define RTL8188E_TRANS_ACT_TO_CARDEMU_STEPS 10
+#define RTL8188E_TRANS_CARDEMU_TO_SUS_STEPS 10
+#define RTL8188E_TRANS_SUS_TO_CARDEMU_STEPS 10
+#define RTL8188E_TRANS_CARDEMU_TO_PDN_STEPS 10
+#define RTL8188E_TRANS_PDN_TO_CARDEMU_STEPS 10
+#define RTL8188E_TRANS_ACT_TO_LPS_STEPS 15
+#define RTL8188E_TRANS_LPS_TO_ACT_STEPS 15
+#define RTL8188E_TRANS_END_STEPS 1
+
+#define RTL8188E_TRANS_CARDEMU_TO_ACT \
+ /* format */ \
+ /* { offset, cut_msk, fab_msk|interface_msk, base|cmd, msk, value }, comments here*/ \
+ {0x0006, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_ALL_MSK, PWR_BASEADDR_MAC, PWR_CMD_POLLING, BIT1, BIT1},/* wait till 0x04[17] = 1 power ready*/ \
+ {0x0002, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_ALL_MSK, PWR_BASEADDR_MAC, PWR_CMD_WRITE, BIT0|BIT1, 0}, /* 0x02[1:0] = 0 reset BB*/ \
+ {0x0026, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_ALL_MSK, PWR_BASEADDR_MAC, PWR_CMD_WRITE, BIT7, BIT7}, /*0x24[23] = 2b'01 schmit trigger */ \
+ {0x0005, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_ALL_MSK, PWR_BASEADDR_MAC, PWR_CMD_WRITE, BIT7, 0}, /* 0x04[15] = 0 disable HWPDN (control by DRV)*/\
+ {0x0005, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_ALL_MSK, PWR_BASEADDR_MAC, PWR_CMD_WRITE, BIT4|BIT3, 0}, /*0x04[12:11] = 2b'00 disable WL suspend*/ \
+ {0x0005, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_ALL_MSK, PWR_BASEADDR_MAC, PWR_CMD_WRITE, BIT0, BIT0}, /*0x04[8] = 1 polling until return 0*/ \
+ {0x0005, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_ALL_MSK, PWR_BASEADDR_MAC, PWR_CMD_POLLING, BIT0, 0}, /*wait till 0x04[8] = 0*/ \
+ {0x0023, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_ALL_MSK, PWR_BASEADDR_MAC, PWR_CMD_WRITE, BIT4, 0}, /*LDO normal mode*/ \
+ {0x0074, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_SDIO_MSK, PWR_BASEADDR_MAC, PWR_CMD_WRITE, BIT4, BIT4}, /*SDIO Driving*/ \
+
+#define RTL8188E_TRANS_ACT_TO_CARDEMU \
+ /* format */ \
+ /* { offset, cut_msk, fab_msk|interface_msk, base|cmd, msk, value }, comments here*/ \
+ {0x001F, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_ALL_MSK, PWR_BASEADDR_MAC, PWR_CMD_WRITE, 0xFF, 0},/*0x1F[7:0] = 0 turn off RF*/ \
+ {0x0023, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_ALL_MSK, PWR_BASEADDR_MAC, PWR_CMD_WRITE, BIT4, BIT4}, /*LDO Sleep mode*/ \
+ {0x0005, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_ALL_MSK, PWR_BASEADDR_MAC, PWR_CMD_WRITE, BIT1, BIT1}, /*0x04[9] = 1 turn off MAC by HW state machine*/ \
+ {0x0005, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_ALL_MSK, PWR_BASEADDR_MAC, PWR_CMD_POLLING, BIT1, 0}, /*wait till 0x04[9] = 0 polling until return 0 to disable*/ \
+
+#define RTL8188E_TRANS_CARDEMU_TO_SUS \
+ /* format */ \
+ /* { offset, cut_msk, fab_msk|interface_msk, base|cmd, msk, value }, comments here*/ \
+ {0x0005, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_USB_MSK|PWR_INTF_SDIO_MSK, PWR_BASEADDR_MAC, PWR_CMD_WRITE, BIT3|BIT4, BIT3}, /*0x04[12:11] = 2b'01enable WL suspend*/ \
+ {0x0005, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_PCI_MSK, PWR_BASEADDR_MAC, PWR_CMD_WRITE, BIT3|BIT4, BIT3|BIT4}, /*0x04[12:11] = 2b'11enable WL suspend for PCIe*/ \
+ {0x0007, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_USB_MSK|PWR_INTF_SDIO_MSK, PWR_BASEADDR_MAC, PWR_CMD_WRITE, 0xFF, BIT7}, /* 0x04[31:30] = 2b'10 enable enable bandgap mbias in suspend */ \
+ {0x0041, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_USB_MSK|PWR_INTF_SDIO_MSK, PWR_BASEADDR_MAC, PWR_CMD_WRITE, BIT4, 0}, /*Clear SIC_EN register 0x40[12] = 1'b0 */ \
+ {0xfe10, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_USB_MSK|PWR_INTF_SDIO_MSK, PWR_BASEADDR_MAC, PWR_CMD_WRITE, BIT4, BIT4}, /*Set USB suspend enable local register 0xfe10[4]=1 */ \
+ {0x0086, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_SDIO_MSK, PWR_BASEADDR_SDIO, PWR_CMD_WRITE, BIT0, BIT0}, /*Set SDIO suspend local register*/ \
+ {0x0086, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_SDIO_MSK, PWR_BASEADDR_SDIO, PWR_CMD_POLLING, BIT1, 0}, /*wait power state to suspend*/
+
+#define RTL8188E_TRANS_SUS_TO_CARDEMU \
+ /* format */ \
+ /* { offset, cut_msk, fab_msk|interface_msk, base|cmd, msk, value }, comments here*/ \
+ {0x0086, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_SDIO_MSK, PWR_BASEADDR_SDIO, PWR_CMD_WRITE, BIT0, 0}, /*Set SDIO suspend local register*/ \
+ {0x0086, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_SDIO_MSK, PWR_BASEADDR_SDIO, PWR_CMD_POLLING, BIT1, BIT1}, /*wait power state to suspend*/\
+ {0x0005, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_ALL_MSK, PWR_BASEADDR_MAC, PWR_CMD_WRITE, BIT3|BIT4, 0}, /*0x04[12:11] = 2b'01enable WL suspend*/
+
+#define RTL8188E_TRANS_CARDEMU_TO_CARDDIS \
+ /* format */ \
+ /* { offset, cut_msk, fab_msk|interface_msk, base|cmd, msk, value }, comments here*/ \
+ {0x0026, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_ALL_MSK, PWR_BASEADDR_MAC, PWR_CMD_WRITE, BIT7, BIT7}, /*0x24[23] = 2b'01 schmit trigger */ \
+ {0x0005, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_USB_MSK|PWR_INTF_SDIO_MSK, PWR_BASEADDR_MAC, PWR_CMD_WRITE, BIT3|BIT4, BIT3}, /*0x04[12:11] = 2b'01 enable WL suspend*/ \
+ {0x0007, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_USB_MSK|PWR_INTF_SDIO_MSK, PWR_BASEADDR_MAC, PWR_CMD_WRITE, 0xFF, 0}, /* 0x04[31:30] = 2b'10 enable enable bandgap mbias in suspend */ \
+ {0x0041, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_USB_MSK|PWR_INTF_SDIO_MSK, PWR_BASEADDR_MAC, PWR_CMD_WRITE, BIT4, 0}, /*Clear SIC_EN register 0x40[12] = 1'b0 */ \
+ {0xfe10, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_USB_MSK, PWR_BASEADDR_MAC, PWR_CMD_WRITE, BIT4, BIT4}, /*Set USB suspend enable local register 0xfe10[4]=1 */ \
+ {0x0086, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_SDIO_MSK, PWR_BASEADDR_SDIO, PWR_CMD_WRITE, BIT0, BIT0}, /*Set SDIO suspend local register*/ \
+ {0x0086, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_SDIO_MSK, PWR_BASEADDR_SDIO, PWR_CMD_POLLING, BIT1, 0}, /*wait power state to suspend*/
+
+#define RTL8188E_TRANS_CARDDIS_TO_CARDEMU \
+ /* format */ \
+ /* { offset, cut_msk, fab_msk|interface_msk, base|cmd, msk, value }, comments here*/ \
+ {0x0086, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_SDIO_MSK, PWR_BASEADDR_SDIO, PWR_CMD_WRITE, BIT0, 0}, /*Set SDIO suspend local register*/ \
+ {0x0086, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_SDIO_MSK, PWR_BASEADDR_SDIO, PWR_CMD_POLLING, BIT1, BIT1}, /*wait power state to suspend*/\
+ {0x0005, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_ALL_MSK, PWR_BASEADDR_MAC, PWR_CMD_WRITE, BIT3|BIT4, 0}, /*0x04[12:11] = 2b'01enable WL suspend*/
+
+#define RTL8188E_TRANS_CARDEMU_TO_PDN \
+ /* format */ \
+ /* { offset, cut_msk, fab_msk|interface_msk, base|cmd, msk, value }, comments here*/ \
+ {0x0006, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_ALL_MSK, PWR_BASEADDR_MAC, PWR_CMD_WRITE, BIT0, 0},/* 0x04[16] = 0*/\
+ {0x0005, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_ALL_MSK, PWR_BASEADDR_MAC, PWR_CMD_WRITE, BIT7, BIT7},/* 0x04[15] = 1*/
+
+#define RTL8188E_TRANS_PDN_TO_CARDEMU \
+ /* format */ \
+ /* { offset, cut_msk, fab_msk|interface_msk, base|cmd, msk, value }, comments here */ \
+ {0x0005, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_ALL_MSK, PWR_BASEADDR_MAC, PWR_CMD_WRITE, BIT7, 0},/* 0x04[15] = 0*/
+
+/* This is used by driver for LPSRadioOff Procedure, not for FW LPS Step */
+#define RTL8188E_TRANS_ACT_TO_LPS \
+ /* format */ \
+ /* { offset, cut_msk, fab_msk|interface_msk, base|cmd, msk, value }, comments here */ \
+ {0x0522, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_ALL_MSK, PWR_BASEADDR_MAC, PWR_CMD_WRITE, 0xFF, 0x7F},/*Tx Pause*/ \
+ {0x05F8, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_ALL_MSK, PWR_BASEADDR_MAC, PWR_CMD_POLLING, 0xFF, 0},/*Should be zero if no packet is transmitting*/ \
+ {0x05F9, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_ALL_MSK, PWR_BASEADDR_MAC, PWR_CMD_POLLING, 0xFF, 0},/*Should be zero if no packet is transmitting*/ \
+ {0x05FA, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_ALL_MSK, PWR_BASEADDR_MAC, PWR_CMD_POLLING, 0xFF, 0},/*Should be zero if no packet is transmitting*/ \
+ {0x05FB, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_ALL_MSK, PWR_BASEADDR_MAC, PWR_CMD_POLLING, 0xFF, 0},/*Should be zero if no packet is transmitting*/ \
+ {0x0002, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_ALL_MSK, PWR_BASEADDR_MAC, PWR_CMD_WRITE, BIT0, 0},/*CCK and OFDM are disabled,and clock are gated*/ \
+ {0x0002, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_ALL_MSK, PWR_BASEADDR_MAC, PWR_CMD_DELAY, 0, PWRSEQ_DELAY_US},/*Delay 1us*/ \
+ {0x0100, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_ALL_MSK, PWR_BASEADDR_MAC, PWR_CMD_WRITE, 0xFF, 0x3F},/*Reset MAC TRX*/ \
+ {0x0101, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_ALL_MSK, PWR_BASEADDR_MAC, PWR_CMD_WRITE, BIT1, 0},/*check if removed later*/ \
+ {0x0553, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_ALL_MSK, PWR_BASEADDR_MAC, PWR_CMD_WRITE, BIT5, BIT5},/*Respond TxOK to scheduler*/ \
+
+#define RTL8188E_TRANS_LPS_TO_ACT \
+ /* format */ \
+ /* { offset, cut_msk, fab_msk|interface_msk, base|cmd, msk, value }, comments here */ \
+ {0x0080, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_SDIO_MSK, PWR_BASEADDR_SDIO, PWR_CMD_WRITE, 0xFF, 0x84}, /*SDIO RPWM*/\
+ {0xFE58, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_USB_MSK, PWR_BASEADDR_MAC, PWR_CMD_WRITE, 0xFF, 0x84}, /*USB RPWM*/\
+ {0x0361, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_PCI_MSK, PWR_BASEADDR_MAC, PWR_CMD_WRITE, 0xFF, 0x84}, /*PCIe RPWM*/\
+ {0x0002, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_ALL_MSK, PWR_BASEADDR_MAC, PWR_CMD_DELAY, 0, PWRSEQ_DELAY_MS}, /*Delay*/\
+ {0x0008, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_ALL_MSK, PWR_BASEADDR_MAC, PWR_CMD_WRITE, BIT4, 0}, /*. 0x08[4] = 0 switch TSF to 40M*/\
+ {0x0109, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_ALL_MSK, PWR_BASEADDR_MAC, PWR_CMD_POLLING, BIT7, 0}, /*Polling 0x109[7]=0 TSF in 40M*/\
+ {0x0029, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_ALL_MSK, PWR_BASEADDR_MAC, PWR_CMD_WRITE, BIT6|BIT7, 0}, /*. 0x29[7:6] = 2b'00 enable BB clock*/\
+ {0x0101, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_ALL_MSK, PWR_BASEADDR_MAC, PWR_CMD_WRITE, BIT1, BIT1}, /*. 0x101[1] = 1*/\
+ {0x0100, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_ALL_MSK, PWR_BASEADDR_MAC, PWR_CMD_WRITE, 0xFF, 0xFF}, /*. 0x100[7:0] = 0xFF enable WMAC TRX*/\
+ {0x0002, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_ALL_MSK, PWR_BASEADDR_MAC, PWR_CMD_WRITE, BIT1|BIT0, BIT1|BIT0}, /*. 0x02[1:0] = 2b'11 enable BB macro*/\
+ {0x0522, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_ALL_MSK, PWR_BASEADDR_MAC, PWR_CMD_WRITE, 0xFF, 0}, /*. 0x522 = 0*/
+
+#define RTL8188E_TRANS_END \
+ /* format */ \
+ /* { offset, cut_msk, fab_msk|interface_msk, base|cmd, msk, value }, comments here*/ \
+ {0xFFFF, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_ALL_MSK,0, PWR_CMD_END, 0, 0}, /* */
+
+extern struct wl_pwr_cfg rtl8188E_power_on_flow[RTL8188E_TRANS_CARDEMU_TO_ACT_STEPS+RTL8188E_TRANS_END_STEPS];
+extern struct wl_pwr_cfg rtl8188E_radio_off_flow[RTL8188E_TRANS_ACT_TO_CARDEMU_STEPS+RTL8188E_TRANS_END_STEPS];
+extern struct wl_pwr_cfg rtl8188E_card_disable_flow[RTL8188E_TRANS_ACT_TO_CARDEMU_STEPS+RTL8188E_TRANS_CARDEMU_TO_PDN_STEPS+RTL8188E_TRANS_END_STEPS];
+extern struct wl_pwr_cfg rtl8188E_card_enable_flow[RTL8188E_TRANS_ACT_TO_CARDEMU_STEPS+RTL8188E_TRANS_CARDEMU_TO_PDN_STEPS+RTL8188E_TRANS_END_STEPS];
+extern struct wl_pwr_cfg rtl8188E_suspend_flow[RTL8188E_TRANS_ACT_TO_CARDEMU_STEPS+RTL8188E_TRANS_CARDEMU_TO_SUS_STEPS+RTL8188E_TRANS_END_STEPS];
+extern struct wl_pwr_cfg rtl8188E_resume_flow[RTL8188E_TRANS_ACT_TO_CARDEMU_STEPS+RTL8188E_TRANS_CARDEMU_TO_SUS_STEPS+RTL8188E_TRANS_END_STEPS];
+extern struct wl_pwr_cfg rtl8188E_hwpdn_flow[RTL8188E_TRANS_ACT_TO_CARDEMU_STEPS+RTL8188E_TRANS_CARDEMU_TO_PDN_STEPS+RTL8188E_TRANS_END_STEPS];
+extern struct wl_pwr_cfg rtl8188E_enter_lps_flow[RTL8188E_TRANS_ACT_TO_LPS_STEPS+RTL8188E_TRANS_END_STEPS];
+extern struct wl_pwr_cfg rtl8188E_leave_lps_flow[RTL8188E_TRANS_LPS_TO_ACT_STEPS+RTL8188E_TRANS_END_STEPS];
+
+#endif /* __HAL8188EPWRSEQ_H__ */
diff --git a/drivers/staging/r8188eu/include/Hal8188ERateAdaptive.h b/drivers/staging/r8188eu/include/Hal8188ERateAdaptive.h
new file mode 100644
index 000000000000..21996a1173ef
--- /dev/null
+++ b/drivers/staging/r8188eu/include/Hal8188ERateAdaptive.h
@@ -0,0 +1,75 @@
+#ifndef __INC_RA_H
+#define __INC_RA_H
+/*++
+Copyright (c) Realtek Semiconductor Corp. All rights reserved.
+
+Module Name:
+ RateAdaptive.h
+
+Abstract:
+ Prototype of RA and related data structure.
+
+Major Change History:
+ When Who What
+ ---------- --------------- -------------------------------
+ 2011-08-12 Page Create.
+--*/
+
+/* Rate adaptive define */
+#define PERENTRY 23
+#define RETRYSIZE 5
+#define RATESIZE 28
+#define TX_RPT2_ITEM_SIZE 8
+
+/* */
+/* TX report 2 format in Rx desc */
+/* */
+#define GET_TX_RPT2_DESC_PKT_LEN_88E(__pRxStatusDesc) \
+ LE_BITS_TO_4BYTE(__pRxStatusDesc, 0, 9)
+#define GET_TX_RPT2_DESC_MACID_VALID_1_88E(__pRxStatusDesc) \
+ LE_BITS_TO_4BYTE(__pRxStatusDesc+16, 0, 32)
+#define GET_TX_RPT2_DESC_MACID_VALID_2_88E(__pRxStatusDesc) \
+ LE_BITS_TO_4BYTE(__pRxStatusDesc+20, 0, 32)
+
+#define GET_TX_REPORT_TYPE1_RERTY_0(__pAddr) \
+ LE_BITS_TO_4BYTE(__pAddr, 0, 16)
+#define GET_TX_REPORT_TYPE1_RERTY_1(__pAddr) \
+ LE_BITS_TO_1BYTE(__pAddr+2, 0, 8)
+#define GET_TX_REPORT_TYPE1_RERTY_2(__pAddr) \
+ LE_BITS_TO_1BYTE(__pAddr+3, 0, 8)
+#define GET_TX_REPORT_TYPE1_RERTY_3(__pAddr) \
+ LE_BITS_TO_1BYTE(__pAddr+4, 0, 8)
+#define GET_TX_REPORT_TYPE1_RERTY_4(__pAddr) \
+ LE_BITS_TO_1BYTE(__pAddr+4+1, 0, 8)
+#define GET_TX_REPORT_TYPE1_DROP_0(__pAddr) \
+ LE_BITS_TO_1BYTE(__pAddr+4+2, 0, 8)
+#define GET_TX_REPORT_TYPE1_DROP_1(__pAddr) \
+ LE_BITS_TO_1BYTE(__pAddr+4+3, 0, 8)
+
+/* End rate adaptive define */
+
+void ODM_RASupport_Init(struct odm_dm_struct *dm_odm);
+
+int ODM_RAInfo_Init_all(struct odm_dm_struct *dm_odm);
+
+int ODM_RAInfo_Init(struct odm_dm_struct *dm_odm, u8 MacID);
+
+u8 ODM_RA_GetShortGI_8188E(struct odm_dm_struct *dm_odm, u8 MacID);
+
+u8 ODM_RA_GetDecisionRate_8188E(struct odm_dm_struct *dm_odm, u8 MacID);
+
+u8 ODM_RA_GetHwPwrStatus_8188E(struct odm_dm_struct *dm_odm, u8 MacID);
+void ODM_RA_UpdateRateInfo_8188E(struct odm_dm_struct *dm_odm, u8 MacID,
+ u8 RateID, u32 RateMask,
+ u8 SGIEnable);
+
+void ODM_RA_SetRSSI_8188E(struct odm_dm_struct *dm_odm, u8 macid,
+ u8 rssi);
+
+void ODM_RA_TxRPT2Handle_8188E(struct odm_dm_struct *dm_odm,
+ u8 *txrpt_buf, u16 txrpt_len,
+ u32 validentry0, u32 validentry1);
+
+void ODM_RA_Set_TxRPT_Time(struct odm_dm_struct *dm_odm, u16 minRptTime);
+
+#endif
diff --git a/drivers/staging/r8188eu/include/Hal8188EReg.h b/drivers/staging/r8188eu/include/Hal8188EReg.h
new file mode 100644
index 000000000000..06818ac6c330
--- /dev/null
+++ b/drivers/staging/r8188eu/include/Hal8188EReg.h
@@ -0,0 +1,44 @@
+/******************************************************************************
+ *
+ * Copyright(c) 2007 - 2011 Realtek Corporation. All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of version 2 of the GNU General Public License as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
+ * more details.
+ *
+ * You should have received a copy of the GNU General Public License along with
+ * this program; if not, write to the Free Software Foundation, Inc.,
+ * 51 Franklin Street, Fifth Floor, Boston, MA 02110, USA
+ *
+ *
+ ******************************************************************************/
+/* */
+/* File Name: Hal8188EReg.h */
+/* */
+/* Description: */
+/* */
+/* This file is for RTL8188E register definition. */
+/* */
+/* */
+/* */
+#ifndef __HAL_8188E_REG_H__
+#define __HAL_8188E_REG_H__
+
+/* */
+/* Register Definition */
+/* */
+#define TRX_ANTDIV_PATH 0x860
+#define RX_ANTDIV_PATH 0xb2c
+#define ODM_R_A_AGC_CORE1_8188E 0xc50
+
+/* */
+/* Bitmap Definition */
+/* */
+#define BIT_FA_RESET_8188E BIT0
+
+#endif
diff --git a/drivers/staging/r8188eu/include/HalHWImg8188E_BB.h b/drivers/staging/r8188eu/include/HalHWImg8188E_BB.h
new file mode 100644
index 000000000000..e57452104bfb
--- /dev/null
+++ b/drivers/staging/r8188eu/include/HalHWImg8188E_BB.h
@@ -0,0 +1,44 @@
+/******************************************************************************
+*
+* Copyright(c) 2007 - 2011 Realtek Corporation. All rights reserved.
+*
+* This program is free software; you can redistribute it and/or modify it
+* under the terms of version 2 of the GNU General Public License as
+* published by the Free Software Foundation.
+*
+* This program is distributed in the hope that it will be useful, but WITHOUT
+* ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+* FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
+* more details.
+*
+* You should have received a copy of the GNU General Public License along with
+* this program; if not, write to the Free Software Foundation, Inc.,
+* 51 Franklin Street, Fifth Floor, Boston, MA 02110, USA
+*
+*
+******************************************************************************/
+
+#ifndef __INC_BB_8188E_HW_IMG_H
+#define __INC_BB_8188E_HW_IMG_H
+
+/* static bool CheckCondition(const u32 Condition, const u32 Hex); */
+
+/******************************************************************************
+* AGC_TAB_1T.TXT
+******************************************************************************/
+
+enum HAL_STATUS ODM_ReadAndConfig_AGC_TAB_1T_8188E(struct odm_dm_struct *odm);
+
+/******************************************************************************
+* PHY_REG_1T.TXT
+******************************************************************************/
+
+enum HAL_STATUS ODM_ReadAndConfig_PHY_REG_1T_8188E(struct odm_dm_struct *odm);
+
+/******************************************************************************
+* PHY_REG_PG.TXT
+******************************************************************************/
+
+void ODM_ReadAndConfig_PHY_REG_PG_8188E(struct odm_dm_struct *dm_odm);
+
+#endif
diff --git a/drivers/staging/r8188eu/include/HalHWImg8188E_FW.h b/drivers/staging/r8188eu/include/HalHWImg8188E_FW.h
new file mode 100644
index 000000000000..ce81fea401a1
--- /dev/null
+++ b/drivers/staging/r8188eu/include/HalHWImg8188E_FW.h
@@ -0,0 +1,33 @@
+/******************************************************************************
+*
+* Copyright(c) 2007 - 2011 Realtek Corporation. All rights reserved.
+*
+* This program is free software; you can redistribute it and/or modify it
+* under the terms of version 2 of the GNU General Public License as
+* published by the Free Software Foundation.
+*
+* This program is distributed in the hope that it will be useful, but WITHOUT
+* ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+* FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
+* more details.
+*
+* You should have received a copy of the GNU General Public License along with
+* this program; if not, write to the Free Software Foundation, Inc.,
+* 51 Franklin Street, Fifth Floor, Boston, MA 02110, USA
+*
+*
+******************************************************************************/
+
+#ifndef __INC_FW_8188E_HW_IMG_H
+#define __INC_FW_8188E_HW_IMG_H
+
+/******************************************************************************
+* FW_AP.TXT
+******************************************************************************/
+/******************************************************************************
+* FW_WoWLAN.TXT
+******************************************************************************/
+#define ArrayLength_8188E_FW_WoWLAN 15764
+extern const u8 Array_8188E_FW_WoWLAN[ArrayLength_8188E_FW_WoWLAN];
+
+#endif
diff --git a/drivers/staging/r8188eu/include/HalHWImg8188E_MAC.h b/drivers/staging/r8188eu/include/HalHWImg8188E_MAC.h
new file mode 100644
index 000000000000..acf78b94fddb
--- /dev/null
+++ b/drivers/staging/r8188eu/include/HalHWImg8188E_MAC.h
@@ -0,0 +1,30 @@
+/******************************************************************************
+*
+* Copyright(c) 2007 - 2011 Realtek Corporation. All rights reserved.
+*
+* This program is free software; you can redistribute it and/or modify it
+* under the terms of version 2 of the GNU General Public License as
+* published by the Free Software Foundation.
+*
+* This program is distributed in the hope that it will be useful, but WITHOUT
+* ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+* FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
+* more details.
+*
+* You should have received a copy of the GNU General Public License along with
+* this program; if not, write to the Free Software Foundation, Inc.,
+* 51 Franklin Street, Fifth Floor, Boston, MA 02110, USA
+*
+*
+******************************************************************************/
+
+#ifndef __INC_MAC_8188E_HW_IMG_H
+#define __INC_MAC_8188E_HW_IMG_H
+
+/******************************************************************************
+* MAC_REG.TXT
+******************************************************************************/
+
+enum HAL_STATUS ODM_ReadAndConfig_MAC_REG_8188E(struct odm_dm_struct *pDM_Odm);
+
+#endif /* end of HWIMG_SUPPORT */
diff --git a/drivers/staging/r8188eu/include/HalHWImg8188E_RF.h b/drivers/staging/r8188eu/include/HalHWImg8188E_RF.h
new file mode 100644
index 000000000000..8ecb40d26c70
--- /dev/null
+++ b/drivers/staging/r8188eu/include/HalHWImg8188E_RF.h
@@ -0,0 +1,30 @@
+/******************************************************************************
+*
+* Copyright(c) 2007 - 2011 Realtek Corporation. All rights reserved.
+*
+* This program is free software; you can redistribute it and/or modify it
+* under the terms of version 2 of the GNU General Public License as
+* published by the Free Software Foundation.
+*
+* This program is distributed in the hope that it will be useful, but WITHOUT
+* ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+* FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
+* more details.
+*
+* You should have received a copy of the GNU General Public License along with
+* this program; if not, write to the Free Software Foundation, Inc.,
+* 51 Franklin Street, Fifth Floor, Boston, MA 02110, USA
+*
+*
+******************************************************************************/
+
+#ifndef __INC_RF_8188E_HW_IMG_H
+#define __INC_RF_8188E_HW_IMG_H
+
+/******************************************************************************
+ * RadioA_1T.TXT
+ ******************************************************************************/
+
+enum HAL_STATUS ODM_ReadAndConfig_RadioA_1T_8188E(struct odm_dm_struct *odm);
+
+#endif /* end of HWIMG_SUPPORT */
diff --git a/drivers/staging/r8188eu/include/HalPhyRf.h b/drivers/staging/r8188eu/include/HalPhyRf.h
new file mode 100644
index 000000000000..1ec497100da1
--- /dev/null
+++ b/drivers/staging/r8188eu/include/HalPhyRf.h
@@ -0,0 +1,30 @@
+/******************************************************************************
+ *
+ * Copyright(c) 2007 - 2011 Realtek Corporation. All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of version 2 of the GNU General Public License as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
+ * more details.
+ *
+ * You should have received a copy of the GNU General Public License along with
+ * this program; if not, write to the Free Software Foundation, Inc.,
+ * 51 Franklin Street, Fifth Floor, Boston, MA 02110, USA
+ *
+ *
+ ******************************************************************************/
+
+ #ifndef __HAL_PHY_RF_H__
+ #define __HAL_PHY_RF_H__
+
+#define ODM_TARGET_CHNL_NUM_2G_5G 59
+
+void ODM_ResetIQKResult(struct odm_dm_struct *pDM_Odm);
+
+u8 ODM_GetRightChnlPlaceforIQK(u8 chnl);
+
+#endif /* #ifndef __HAL_PHY_RF_H__ */
diff --git a/drivers/staging/r8188eu/include/HalPhyRf_8188e.h b/drivers/staging/r8188eu/include/HalPhyRf_8188e.h
new file mode 100644
index 000000000000..807c301a86e4
--- /dev/null
+++ b/drivers/staging/r8188eu/include/HalPhyRf_8188e.h
@@ -0,0 +1,58 @@
+/******************************************************************************
+ *
+ * Copyright(c) 2007 - 2011 Realtek Corporation. All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of version 2 of the GNU General Public License as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
+ * more details.
+ *
+ * You should have received a copy of the GNU General Public License along with
+ * this program; if not, write to the Free Software Foundation, Inc.,
+ * 51 Franklin Street, Fifth Floor, Boston, MA 02110, USA
+ *
+ *
+ ******************************************************************************/
+
+#ifndef __HAL_PHY_RF_8188E_H__
+#define __HAL_PHY_RF_8188E_H__
+
+/*--------------------------Define Parameters-------------------------------*/
+#define IQK_DELAY_TIME_88E 10 /* ms */
+#define index_mapping_NUM_88E 15
+#define AVG_THERMAL_NUM_88E 4
+
+void ODM_TxPwrTrackAdjust88E(struct odm_dm_struct *pDM_Odm,
+ u8 Type, /* 0 = OFDM, 1 = CCK */
+ u8 *pDirection,/* 1 = +(incr) 2 = -(decr) */
+ u32 *pOutWriteVal); /* Tx tracking CCK/OFDM BB
+ * swing index adjust */
+
+void odm_TXPowerTrackingCallback_ThermalMeter_8188E(struct adapter *Adapter);
+
+/* 1 7. IQK */
+
+void PHY_IQCalibrate_8188E(struct adapter *Adapter, bool ReCovery);
+
+/* LC calibrate */
+void PHY_LCCalibrate_8188E(struct adapter *pAdapter);
+
+/* AP calibrate */
+void PHY_DigitalPredistortion_8188E(struct adapter *pAdapter);
+
+void _PHY_SaveADDARegisters(struct adapter *pAdapter, u32 *ADDAReg,
+ u32 *ADDABackup, u32 RegisterNum);
+
+void _PHY_PathADDAOn(struct adapter *pAdapter, u32 *ADDAReg,
+ bool isPathAOn, bool is2T);
+
+void _PHY_MACSettingCalibration(struct adapter *pAdapter, u32 *MACReg,
+ u32 *MACBackup);
+
+void _PHY_PathAStandBy(struct adapter *pAdapter);
+
+#endif /* #ifndef __HAL_PHY_RF_8188E_H__ */
diff --git a/drivers/staging/r8188eu/include/HalPwrSeqCmd.h b/drivers/staging/r8188eu/include/HalPwrSeqCmd.h
new file mode 100644
index 000000000000..c591e9d1c23b
--- /dev/null
+++ b/drivers/staging/r8188eu/include/HalPwrSeqCmd.h
@@ -0,0 +1,126 @@
+/******************************************************************************
+ *
+ * Copyright(c) 2007 - 2011 Realtek Corporation. All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of version 2 of the GNU General Public License as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
+ * more details.
+ *
+ * You should have received a copy of the GNU General Public License along with
+ * this program; if not, write to the Free Software Foundation, Inc.,
+ * 51 Franklin Street, Fifth Floor, Boston, MA 02110, USA
+ *
+ *
+ ******************************************************************************/
+#ifndef __HALPWRSEQCMD_H__
+#define __HALPWRSEQCMD_H__
+
+#include <drv_types.h>
+
+/*---------------------------------------------*/
+/* 3 The value of cmd: 4 bits */
+/*---------------------------------------------*/
+#define PWR_CMD_READ 0x00
+ /* offset: the read register offset */
+ /* msk: the mask of the read value */
+ /* value: N/A, left by 0 */
+ /* note: dirver shall implement this function by read & msk */
+
+#define PWR_CMD_WRITE 0x01
+ /* offset: the read register offset */
+ /* msk: the mask of the write bits */
+ /* value: write value */
+ /* note: driver shall implement this cmd by read & msk after write */
+
+#define PWR_CMD_POLLING 0x02
+ /* offset: the read register offset */
+ /* msk: the mask of the polled value */
+ /* value: the value to be polled, masked by the msd field. */
+ /* note: driver shall implement this cmd by */
+ /* do{ */
+ /* if ( (Read(offset) & msk) == (value & msk) ) */
+ /* break; */
+ /* } while (not timeout); */
+
+#define PWR_CMD_DELAY 0x03
+ /* offset: the value to delay */
+ /* msk: N/A */
+ /* value: the unit of delay, 0: us, 1: ms */
+
+#define PWR_CMD_END 0x04
+ /* offset: N/A */
+ /* msk: N/A */
+ /* value: N/A */
+
+/*---------------------------------------------*/
+/* 3 The value of base: 4 bits */
+/*---------------------------------------------*/
+ /* define the base address of each block */
+#define PWR_BASEADDR_MAC 0x00
+#define PWR_BASEADDR_USB 0x01
+#define PWR_BASEADDR_PCIE 0x02
+#define PWR_BASEADDR_SDIO 0x03
+
+/*---------------------------------------------*/
+/* 3 The value of interface_msk: 4 bits */
+/*---------------------------------------------*/
+#define PWR_INTF_SDIO_MSK BIT(0)
+#define PWR_INTF_USB_MSK BIT(1)
+#define PWR_INTF_PCI_MSK BIT(2)
+#define PWR_INTF_ALL_MSK (BIT(0)|BIT(1)|BIT(2)|BIT(3))
+
+/*---------------------------------------------*/
+/* 3 The value of fab_msk: 4 bits */
+/*---------------------------------------------*/
+#define PWR_FAB_TSMC_MSK BIT(0)
+#define PWR_FAB_UMC_MSK BIT(1)
+#define PWR_FAB_ALL_MSK (BIT(0)|BIT(1)|BIT(2)|BIT(3))
+
+/*---------------------------------------------*/
+/* 3 The value of cut_msk: 8 bits */
+/*---------------------------------------------*/
+#define PWR_CUT_TESTCHIP_MSK BIT(0)
+#define PWR_CUT_A_MSK BIT(1)
+#define PWR_CUT_B_MSK BIT(2)
+#define PWR_CUT_C_MSK BIT(3)
+#define PWR_CUT_D_MSK BIT(4)
+#define PWR_CUT_E_MSK BIT(5)
+#define PWR_CUT_F_MSK BIT(6)
+#define PWR_CUT_G_MSK BIT(7)
+#define PWR_CUT_ALL_MSK 0xFF
+
+enum pwrseq_cmd_delat_unit {
+ PWRSEQ_DELAY_US,
+ PWRSEQ_DELAY_MS,
+};
+
+struct wl_pwr_cfg {
+ u16 offset;
+ u8 cut_msk;
+ u8 fab_msk:4;
+ u8 interface_msk:4;
+ u8 base:4;
+ u8 cmd:4;
+ u8 msk;
+ u8 value;
+};
+
+#define GET_PWR_CFG_OFFSET(__PWR_CMD) __PWR_CMD.offset
+#define GET_PWR_CFG_CUT_MASK(__PWR_CMD) __PWR_CMD.cut_msk
+#define GET_PWR_CFG_FAB_MASK(__PWR_CMD) __PWR_CMD.fab_msk
+#define GET_PWR_CFG_INTF_MASK(__PWR_CMD) __PWR_CMD.interface_msk
+#define GET_PWR_CFG_BASE(__PWR_CMD) __PWR_CMD.base
+#define GET_PWR_CFG_CMD(__PWR_CMD) __PWR_CMD.cmd
+#define GET_PWR_CFG_MASK(__PWR_CMD) __PWR_CMD.msk
+#define GET_PWR_CFG_VALUE(__PWR_CMD) __PWR_CMD.value
+
+/* Prototype of protected function. */
+u8 HalPwrSeqCmdParsing(struct adapter *padapter, u8 CutVersion, u8 FabVersion,
+ u8 InterfaceType, struct wl_pwr_cfg PwrCfgCmd[]);
+
+#endif
diff --git a/drivers/staging/r8188eu/include/HalVerDef.h b/drivers/staging/r8188eu/include/HalVerDef.h
new file mode 100644
index 000000000000..2a7dc28b8de7
--- /dev/null
+++ b/drivers/staging/r8188eu/include/HalVerDef.h
@@ -0,0 +1,166 @@
+/******************************************************************************
+ *
+ * Copyright(c) 2007 - 2011 Realtek Corporation. All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of version 2 of the GNU General Public License as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
+ * more details.
+ *
+ * You should have received a copy of the GNU General Public License along with
+ * this program; if not, write to the Free Software Foundation, Inc.,
+ * 51 Franklin Street, Fifth Floor, Boston, MA 02110, USA
+ *
+ *
+ ******************************************************************************/
+#ifndef __HAL_VERSION_DEF_H__
+#define __HAL_VERSION_DEF_H__
+
+enum HAL_IC_TYPE {
+ CHIP_8192S = 0,
+ CHIP_8188C = 1,
+ CHIP_8192C = 2,
+ CHIP_8192D = 3,
+ CHIP_8723A = 4,
+ CHIP_8188E = 5,
+ CHIP_8881A = 6,
+ CHIP_8812A = 7,
+ CHIP_8821A = 8,
+ CHIP_8723B = 9,
+ CHIP_8192E = 10,
+};
+
+enum HAL_CHIP_TYPE {
+ TEST_CHIP = 0,
+ NORMAL_CHIP = 1,
+ FPGA = 2,
+};
+
+enum HAL_CUT_VERSION {
+ A_CUT_VERSION = 0,
+ B_CUT_VERSION = 1,
+ C_CUT_VERSION = 2,
+ D_CUT_VERSION = 3,
+ E_CUT_VERSION = 4,
+ F_CUT_VERSION = 5,
+ G_CUT_VERSION = 6,
+};
+
+enum HAL_VENDOR {
+ CHIP_VENDOR_TSMC = 0,
+ CHIP_VENDOR_UMC = 1,
+};
+
+enum HAL_RF_TYPE {
+ RF_TYPE_1T1R = 0,
+ RF_TYPE_1T2R = 1,
+ RF_TYPE_2T2R = 2,
+ RF_TYPE_2T3R = 3,
+ RF_TYPE_2T4R = 4,
+ RF_TYPE_3T3R = 5,
+ RF_TYPE_3T4R = 6,
+ RF_TYPE_4T4R = 7,
+};
+
+struct HAL_VERSION {
+ enum HAL_IC_TYPE ICType;
+ enum HAL_CHIP_TYPE ChipType;
+ enum HAL_CUT_VERSION CUTVersion;
+ enum HAL_VENDOR VendorType;
+ enum HAL_RF_TYPE RFType;
+ u8 ROMVer;
+};
+
+/* Get element */
+#define GET_CVID_IC_TYPE(version) (((version).ICType))
+#define GET_CVID_CHIP_TYPE(version) (((version).ChipType))
+#define GET_CVID_RF_TYPE(version) (((version).RFType))
+#define GET_CVID_MANUFACTUER(version) (((version).VendorType))
+#define GET_CVID_CUT_VERSION(version) (((version).CUTVersion))
+#define GET_CVID_ROM_VERSION(version) (((version).ROMVer) & ROM_VERSION_MASK)
+
+/* Common Macro. -- */
+/* HAL_VERSION VersionID */
+
+/* HAL_IC_TYPE_E */
+#define IS_81XXC(version) \
+ (((GET_CVID_IC_TYPE(version) == CHIP_8192C) || \
+ (GET_CVID_IC_TYPE(version) == CHIP_8188C)) ? true : false)
+#define IS_8723_SERIES(version) \
+ ((GET_CVID_IC_TYPE(version) == CHIP_8723A) ? true : false)
+#define IS_92D(version) \
+ ((GET_CVID_IC_TYPE(version) == CHIP_8192D) ? true : false)
+#define IS_8188E(version) \
+ ((GET_CVID_IC_TYPE(version) == CHIP_8188E) ? true : false)
+
+/* HAL_CHIP_TYPE_E */
+#define IS_TEST_CHIP(version) \
+ ((GET_CVID_CHIP_TYPE(version) == TEST_CHIP) ? true : false)
+#define IS_NORMAL_CHIP(version) \
+ ((GET_CVID_CHIP_TYPE(version) == NORMAL_CHIP) ? true : false)
+
+/* HAL_CUT_VERSION_E */
+#define IS_A_CUT(version) \
+ ((GET_CVID_CUT_VERSION(version) == A_CUT_VERSION) ? true : false)
+#define IS_B_CUT(version) \
+ ((GET_CVID_CUT_VERSION(version) == B_CUT_VERSION) ? true : false)
+#define IS_C_CUT(version) \
+ ((GET_CVID_CUT_VERSION(version) == C_CUT_VERSION) ? true : false)
+#define IS_D_CUT(version) \
+ ((GET_CVID_CUT_VERSION(version) == D_CUT_VERSION) ? true : false)
+#define IS_E_CUT(version) \
+ ((GET_CVID_CUT_VERSION(version) == E_CUT_VERSION) ? true : false)
+
+/* HAL_VENDOR_E */
+#define IS_CHIP_VENDOR_TSMC(version) \
+ ((GET_CVID_MANUFACTUER(version) == CHIP_VENDOR_TSMC) ? true : false)
+#define IS_CHIP_VENDOR_UMC(version) \
+ ((GET_CVID_MANUFACTUER(version) == CHIP_VENDOR_UMC) ? true : false)
+
+/* HAL_RF_TYPE_E */
+#define IS_1T1R(version) \
+ ((GET_CVID_RF_TYPE(version) == RF_TYPE_1T1R) ? true : false)
+#define IS_1T2R(version) \
+ ((GET_CVID_RF_TYPE(version) == RF_TYPE_1T2R) ? true : false)
+#define IS_2T2R(version) \
+ ((GET_CVID_RF_TYPE(version) == RF_TYPE_2T2R) ? true : false)
+
+/* Chip version Macro. -- */
+#define IS_81XXC_TEST_CHIP(version) \
+ ((IS_81XXC(version) && (!IS_NORMAL_CHIP(version))) ? true : false)
+
+#define IS_92C_SERIAL(version) \
+ ((IS_81XXC(version) && IS_2T2R(version)) ? true : false)
+#define IS_81xxC_VENDOR_UMC_A_CUT(version) \
+ (IS_81XXC(version) ? (IS_CHIP_VENDOR_UMC(version) ? \
+ (IS_A_CUT(version) ? true : false) : false) : false)
+#define IS_81xxC_VENDOR_UMC_B_CUT(version) \
+ (IS_81XXC(version) ? (IS_CHIP_VENDOR_UMC(version) ? \
+ (IS_B_CUT(version) ? true : false) : false) : false)
+#define IS_81xxC_VENDOR_UMC_C_CUT(version) \
+ (IS_81XXC(version) ? (IS_CHIP_VENDOR_UMC(version) ? \
+ (IS_C_CUT(version) ? true : false) : false) : false)
+
+#define IS_NORMAL_CHIP92D(version) \
+ ((IS_92D(version)) ? \
+ ((GET_CVID_CHIP_TYPE(version) == NORMAL_CHIP) ? true : false) : false)
+
+#define IS_92D_SINGLEPHY(version) \
+ ((IS_92D(version)) ? (IS_2T2R(version) ? true : false) : false)
+#define IS_92D_C_CUT(version) \
+ ((IS_92D(version)) ? (IS_C_CUT(version) ? true : false) : false)
+#define IS_92D_D_CUT(version) \
+ ((IS_92D(version)) ? (IS_D_CUT(version) ? true : false) : false)
+#define IS_92D_E_CUT(version) \
+ ((IS_92D(version)) ? (IS_E_CUT(version) ? true : false) : false)
+
+#define IS_8723A_A_CUT(version) \
+ ((IS_8723_SERIES(version)) ? (IS_A_CUT(version) ? true : false) : false)
+#define IS_8723A_B_CUT(version) \
+ ((IS_8723_SERIES(version)) ? (IS_B_CUT(version) ? true : false) : false)
+
+#endif
diff --git a/drivers/staging/r8188eu/include/autoconf.h b/drivers/staging/r8188eu/include/autoconf.h
new file mode 100644
index 000000000000..cfa790794fd3
--- /dev/null
+++ b/drivers/staging/r8188eu/include/autoconf.h
@@ -0,0 +1,43 @@
+/******************************************************************************
+ *
+ * Copyright(c) 2007 - 2011 Realtek Corporation. All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of version 2 of the GNU General Public License as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
+ * more details.
+ *
+ * You should have received a copy of the GNU General Public License along with
+ * this program; if not, write to the Free Software Foundation, Inc.,
+ * 51 Franklin Street, Fifth Floor, Boston, MA 02110, USA
+ *
+ *
+ ******************************************************************************/
+
+/* temporarily flag ******* */
+/*
+ * Public General Config
+ */
+#define RTL871X_MODULE_NAME "88EU"
+#define DRV_NAME "rtl8188eu"
+
+/*
+ * Internal General Config
+ */
+
+#define CONFIG_AP_MODE
+
+#define CONFIG_P2P
+
+#define RTW_NOTCH_FILTER 0 /* 0:Disable, 1:Enable, */
+
+#define CONFIG_BR_EXT_BRNAME "br0"
+
+/*
+ * Debug Related Config
+ */
+#define DBG 1
diff --git a/drivers/staging/r8188eu/include/basic_types.h b/drivers/staging/r8188eu/include/basic_types.h
new file mode 100644
index 000000000000..8a7ca992674a
--- /dev/null
+++ b/drivers/staging/r8188eu/include/basic_types.h
@@ -0,0 +1,184 @@
+/******************************************************************************
+ *
+ * Copyright(c) 2007 - 2011 Realtek Corporation. All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of version 2 of the GNU General Public License as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
+ * more details.
+ *
+ * You should have received a copy of the GNU General Public License along with
+ * this program; if not, write to the Free Software Foundation, Inc.,
+ * 51 Franklin Street, Fifth Floor, Boston, MA 02110, USA
+ *
+ *
+ ******************************************************************************/
+#ifndef __BASIC_TYPES_H__
+#define __BASIC_TYPES_H__
+
+#define SUCCESS 0
+#define FAIL (-1)
+
+#include <linux/types.h>
+#define NDIS_OID uint
+
+typedef void (*proc_t)(void *);
+
+#define FIELD_OFFSET(s, field) ((ssize_t)&((s *)(0))->field)
+
+#define MEM_ALIGNMENT_OFFSET (sizeof(size_t))
+#define MEM_ALIGNMENT_PADDING (sizeof(size_t) - 1)
+
+/* port from fw */
+/* TODO: Macros Below are Sync from SD7-Driver. It is necessary
+ * to check correctness */
+
+/*
+ * Call endian free function when
+ * 1. Read/write packet content.
+ * 2. Before write integer to IO.
+ * 3. After read integer from IO.
+*/
+
+/* Convert little data endian to host ordering */
+#define EF1BYTE(_val) \
+ ((u8)(_val))
+#define EF2BYTE(_val) \
+ (le16_to_cpu(_val))
+#define EF4BYTE(_val) \
+ (le32_to_cpu(_val))
+
+/* Read data from memory */
+#define READEF1BYTE(_ptr) \
+ EF1BYTE(*((u8 *)(_ptr)))
+/* Read le16 data from memory and convert to host ordering */
+#define READEF2BYTE(_ptr) \
+ EF2BYTE(*(_ptr))
+#define READEF4BYTE(_ptr) \
+ EF4BYTE(*(_ptr))
+
+/* Write data to memory */
+#define WRITEEF1BYTE(_ptr, _val) \
+ do { \
+ (*((u8 *)(_ptr))) = EF1BYTE(_val) \
+ } while (0)
+/* Write le data to memory in host ordering */
+#define WRITEEF2BYTE(_ptr, _val) \
+ do { \
+ (*((u16 *)(_ptr))) = EF2BYTE(_val) \
+ } while (0)
+
+#define WRITEEF4BYTE(_ptr, _val) \
+ do { \
+ (*((u32 *)(_ptr))) = EF2BYTE(_val) \
+ } while (0)
+
+/* Create a bit mask
+ * Examples:
+ * BIT_LEN_MASK_32(0) => 0x00000000
+ * BIT_LEN_MASK_32(1) => 0x00000001
+ * BIT_LEN_MASK_32(2) => 0x00000003
+ * BIT_LEN_MASK_32(32) => 0xFFFFFFFF
+ */
+#define BIT_LEN_MASK_32(__bitlen) \
+ (0xFFFFFFFF >> (32 - (__bitlen)))
+#define BIT_LEN_MASK_16(__bitlen) \
+ (0xFFFF >> (16 - (__bitlen)))
+#define BIT_LEN_MASK_8(__bitlen) \
+ (0xFF >> (8 - (__bitlen)))
+
+/* Create an offset bit mask
+ * Examples:
+ * BIT_OFFSET_LEN_MASK_32(0, 2) => 0x00000003
+ * BIT_OFFSET_LEN_MASK_32(16, 2) => 0x00030000
+ */
+#define BIT_OFFSET_LEN_MASK_32(__bitoffset, __bitlen) \
+ (BIT_LEN_MASK_32(__bitlen) << (__bitoffset))
+#define BIT_OFFSET_LEN_MASK_16(__bitoffset, __bitlen) \
+ (BIT_LEN_MASK_16(__bitlen) << (__bitoffset))
+#define BIT_OFFSET_LEN_MASK_8(__bitoffset, __bitlen) \
+ (BIT_LEN_MASK_8(__bitlen) << (__bitoffset))
+
+/*Description:
+ * Return 4-byte value in host byte ordering from
+ * 4-byte pointer in little-endian system.
+ */
+#define LE_P4BYTE_TO_HOST_4BYTE(__pstart) \
+ (EF4BYTE(*((__le32 *)(__pstart))))
+#define LE_P2BYTE_TO_HOST_2BYTE(__pstart) \
+ (EF2BYTE(*((__le16 *)(__pstart))))
+#define LE_P1BYTE_TO_HOST_1BYTE(__pstart) \
+ (EF1BYTE(*((u8 *)(__pstart))))
+
+/*Description:
+Translate subfield (continuous bits in little-endian) of 4-byte
+value to host byte ordering.*/
+#define LE_BITS_TO_4BYTE(__pstart, __bitoffset, __bitlen) \
+ ( \
+ (LE_P4BYTE_TO_HOST_4BYTE(__pstart) >> (__bitoffset)) & \
+ BIT_LEN_MASK_32(__bitlen) \
+ )
+#define LE_BITS_TO_2BYTE(__pstart, __bitoffset, __bitlen) \
+ ( \
+ (LE_P2BYTE_TO_HOST_2BYTE(__pstart) >> (__bitoffset)) & \
+ BIT_LEN_MASK_16(__bitlen) \
+ )
+#define LE_BITS_TO_1BYTE(__pstart, __bitoffset, __bitlen) \
+ ( \
+ (LE_P1BYTE_TO_HOST_1BYTE(__pstart) >> (__bitoffset)) & \
+ BIT_LEN_MASK_8(__bitlen) \
+ )
+
+/* Description:
+ * Mask subfield (continuous bits in little-endian) of 4-byte value
+ * and return the result in 4-byte value in host byte ordering.
+ */
+#define LE_BITS_CLEARED_TO_4BYTE(__pstart, __bitoffset, __bitlen) \
+ ( \
+ LE_P4BYTE_TO_HOST_4BYTE(__pstart) & \
+ (~BIT_OFFSET_LEN_MASK_32(__bitoffset, __bitlen)) \
+ )
+#define LE_BITS_CLEARED_TO_2BYTE(__pstart, __bitoffset, __bitlen) \
+ ( \
+ LE_P2BYTE_TO_HOST_2BYTE(__pstart) & \
+ (~BIT_OFFSET_LEN_MASK_16(__bitoffset, __bitlen)) \
+ )
+#define LE_BITS_CLEARED_TO_1BYTE(__pstart, __bitoffset, __bitlen) \
+ ( \
+ LE_P1BYTE_TO_HOST_1BYTE(__pstart) & \
+ (~BIT_OFFSET_LEN_MASK_8(__bitoffset, __bitlen)) \
+ )
+
+/* Description:
+ * Set subfield of little-endian 4-byte value to specified value.
+ */
+#define SET_BITS_TO_LE_4BYTE(__pstart, __bitoffset, __bitlen, __val) \
+ *((u32 *)(__pstart)) = \
+ ( \
+ LE_BITS_CLEARED_TO_4BYTE(__pstart, __bitoffset, __bitlen) | \
+ ((((u32)__val) & BIT_LEN_MASK_32(__bitlen)) << (__bitoffset)) \
+ )
+
+#define SET_BITS_TO_LE_2BYTE(__pstart, __bitoffset, __bitlen, __val) \
+ *((u16 *)(__pstart)) = \
+ ( \
+ LE_BITS_CLEARED_TO_2BYTE(__pstart, __bitoffset, __bitlen) | \
+ ((((u16)__val) & BIT_LEN_MASK_16(__bitlen)) << (__bitoffset)) \
+ );
+
+#define SET_BITS_TO_LE_1BYTE(__pstart, __bitoffset, __bitlen, __val) \
+ *((u8 *)(__pstart)) = EF1BYTE \
+ ( \
+ LE_BITS_CLEARED_TO_1BYTE(__pstart, __bitoffset, __bitlen) | \
+ ((((u8)__val) & BIT_LEN_MASK_8(__bitlen)) << (__bitoffset)) \
+ )
+
+/* Get the N-bytes aligment offset from the current length */
+#define N_BYTE_ALIGMENT(__value, __aligment) ((__aligment == 1) ? \
+ (__value) : (((__value + __aligment - 1) / __aligment) * __aligment))
+
+#endif /* __BASIC_TYPES_H__ */
diff --git a/drivers/staging/r8188eu/include/cmd_osdep.h b/drivers/staging/r8188eu/include/cmd_osdep.h
new file mode 100644
index 000000000000..5a8465e147b3
--- /dev/null
+++ b/drivers/staging/r8188eu/include/cmd_osdep.h
@@ -0,0 +1,32 @@
+/******************************************************************************
+ *
+ * Copyright(c) 2007 - 2011 Realtek Corporation. All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of version 2 of the GNU General Public License as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
+ * more details.
+ *
+ * You should have received a copy of the GNU General Public License along with
+ * this program; if not, write to the Free Software Foundation, Inc.,
+ * 51 Franklin Street, Fifth Floor, Boston, MA 02110, USA
+ *
+ *
+ ******************************************************************************/
+#ifndef __CMD_OSDEP_H_
+#define __CMD_OSDEP_H_
+
+#include <osdep_service.h>
+#include <drv_types.h>
+
+extern int _rtw_init_cmd_priv(struct cmd_priv *pcmdpriv);
+extern int _rtw_init_evt_priv(struct evt_priv *pevtpriv);
+extern void _rtw_free_cmd_priv(struct cmd_priv *pcmdpriv);
+extern int _rtw_enqueue_cmd(struct __queue *queue, struct cmd_obj *obj);
+extern struct cmd_obj *_rtw_dequeue_cmd(struct __queue *queue);
+
+#endif
diff --git a/drivers/staging/r8188eu/include/drv_types.h b/drivers/staging/r8188eu/include/drv_types.h
new file mode 100644
index 000000000000..9aa72a91d467
--- /dev/null
+++ b/drivers/staging/r8188eu/include/drv_types.h
@@ -0,0 +1,346 @@
+/******************************************************************************
+ *
+ * Copyright(c) 2007 - 2012 Realtek Corporation. All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of version 2 of the GNU General Public License as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
+ * more details.
+ *
+ * You should have received a copy of the GNU General Public License along with
+ * this program; if not, write to the Free Software Foundation, Inc.,
+ * 51 Franklin Street, Fifth Floor, Boston, MA 02110, USA
+ *
+ *
+ ******************************************************************************/
+/*-----------------------------------------------------------------------------
+
+ For type defines and data structure defines
+
+------------------------------------------------------------------------------*/
+
+#ifndef __DRV_TYPES_H__
+#define __DRV_TYPES_H__
+
+#define DRV_NAME "r8188eu"
+#define CONFIG_88EU_AP_MODE 1
+#define CONFIG_88EU_P2P 1
+
+#include <osdep_service.h>
+#include <wlan_bssdef.h>
+#include <drv_types_linux.h>
+#include <rtw_ht.h>
+#include <rtw_cmd.h>
+#include <rtw_xmit.h>
+#include <rtw_recv.h>
+#include <hal_intf.h>
+#include <hal_com.h>
+#include <rtw_qos.h>
+#include <rtw_security.h>
+#include <rtw_pwrctrl.h>
+#include <rtw_io.h>
+#include <rtw_eeprom.h>
+#include <sta_info.h>
+#include <rtw_mlme.h>
+#include <rtw_debug.h>
+#include <rtw_rf.h>
+#include <rtw_event.h>
+#include <rtw_led.h>
+#include <rtw_mlme_ext.h>
+#include <rtw_p2p.h>
+#include <rtw_ap.h>
+#include <rtw_mp.h>
+#include <rtw_br_ext.h>
+
+enum _NIC_VERSION {
+ RTL8711_NIC,
+ RTL8712_NIC,
+ RTL8713_NIC,
+ RTL8716_NIC
+};
+
+#define SPEC_DEV_ID_NONE BIT(0)
+#define SPEC_DEV_ID_DISABLE_HT BIT(1)
+#define SPEC_DEV_ID_ENABLE_PS BIT(2)
+#define SPEC_DEV_ID_RF_CONFIG_1T1R BIT(3)
+#define SPEC_DEV_ID_RF_CONFIG_2T2R BIT(4)
+#define SPEC_DEV_ID_ASSIGN_IFNAME BIT(5)
+
+struct specific_device_id {
+ u32 flags;
+ u16 idVendor;
+ u16 idProduct;
+};
+
+struct registry_priv {
+ u8 chip_version;
+ u8 rfintfs;
+ u8 lbkmode;
+ u8 hci;
+ struct ndis_802_11_ssid ssid;
+ u8 network_mode; /* infra, ad-hoc, auto */
+ u8 channel;/* ad-hoc support requirement */
+ u8 wireless_mode;/* A, B, G, auto */
+ u8 scan_mode;/* active, passive */
+ u8 radio_enable;
+ u8 preamble;/* long, short, auto */
+ u8 vrtl_carrier_sense;/* Enable, Disable, Auto */
+ u8 vcs_type;/* RTS/CTS, CTS-to-self */
+ u16 rts_thresh;
+ u16 frag_thresh;
+ u8 adhoc_tx_pwr;
+ u8 soft_ap;
+ u8 power_mgnt;
+ u8 ips_mode;
+ u8 smart_ps;
+ u8 long_retry_lmt;
+ u8 short_retry_lmt;
+ u16 busy_thresh;
+ u8 ack_policy;
+ u8 mp_mode;
+ u8 software_encrypt;
+ u8 software_decrypt;
+ u8 acm_method;
+ /* UAPSD */
+ u8 wmm_enable;
+ u8 uapsd_enable;
+ u8 uapsd_max_sp;
+ u8 uapsd_acbk_en;
+ u8 uapsd_acbe_en;
+ u8 uapsd_acvi_en;
+ u8 uapsd_acvo_en;
+
+ u8 led_enable;
+
+ struct wlan_bssid_ex dev_network;
+
+ u8 ht_enable;
+ u8 cbw40_enable;
+ u8 ampdu_enable;/* for tx */
+ u8 rx_stbc;
+ u8 ampdu_amsdu;/* A-MPDU Supports A-MSDU is permitted */
+ u8 lowrate_two_xmit;
+
+ u8 rf_config;
+ u8 low_power;
+
+ u8 wifi_spec;/* !turbo_mode */
+
+ u8 channel_plan;
+ bool bAcceptAddbaReq;
+
+ u8 antdiv_cfg;
+ u8 antdiv_type;
+
+ u8 usbss_enable;/* 0:disable,1:enable */
+ u8 hwpdn_mode;/* 0:disable,1:enable,2:decide by EFUSE config */
+ u8 hwpwrp_detect;/* 0:disable,1:enable */
+
+ u8 hw_wps_pbc;/* 0:disable,1:enable */
+
+ u8 max_roaming_times; /* the max number driver will try */
+
+ u8 fw_iol; /* enable iol without other concern */
+
+ u8 enable80211d;
+
+ u8 ifname[16];
+ u8 if2name[16];
+
+ u8 notch_filter;
+};
+
+/* For registry parameters */
+#define RGTRY_OFT(field) ((u32)FIELD_OFFSET(struct registry_priv, field))
+#define RGTRY_SZ(field) sizeof(((struct registry_priv *)0)->field)
+#define BSSID_OFT(field) ((u32)FIELD_OFFSET(struct wlan_bssid_ex, field))
+#define BSSID_SZ(field) sizeof(((struct wlan_bssid_ex *)0)->field)
+
+#define MAX_CONTINUAL_URB_ERR 4
+
+struct rt_firmware {
+ u8 *szFwBuffer;
+ u32 ulFwLength;
+};
+
+struct dvobj_priv {
+ struct adapter *if1;
+ struct adapter *if2;
+
+ /* For 92D, DMDP have 2 interface. */
+ u8 InterfaceNumber;
+ u8 NumInterfaces;
+
+ /* In /Out Pipe information */
+ int RtInPipe[2];
+ int RtOutPipe[3];
+ u8 Queue2Pipe[HW_QUEUE_ENTRY];/* for out pipe mapping */
+
+ u8 irq_alloc;
+
+ struct rt_firmware firmware;
+
+/*-------- below is for USB INTERFACE --------*/
+
+ u8 nr_endpoint;
+ u8 ishighspeed;
+ u8 RtNumInPipes;
+ u8 RtNumOutPipes;
+ int ep_num[5]; /* endpoint number */
+ int RegUsbSS;
+ struct semaphore usb_suspend_sema;
+ struct mutex usb_vendor_req_mutex;
+
+ u8 *usb_alloc_vendor_req_buf;
+ u8 *usb_vendor_req_buf;
+
+ struct usb_interface *pusbintf;
+ struct usb_device *pusbdev;
+
+ ATOMIC_T continual_urb_error;
+ u8 signal_strength;
+};
+
+static inline struct device *dvobj_to_dev(struct dvobj_priv *dvobj)
+{
+ /* todo: get interface type from dvobj and the return
+ * the dev accordingly */
+ return &dvobj->pusbintf->dev;
+};
+
+enum _IFACE_TYPE {
+ IFACE_PORT0, /* mapping to port0 for C/D series chips */
+ IFACE_PORT1, /* mapping to port1 for C/D series chip */
+ MAX_IFACE_PORT,
+};
+
+enum _ADAPTER_TYPE {
+ PRIMARY_ADAPTER,
+ SECONDARY_ADAPTER,
+ MAX_ADAPTER,
+};
+
+enum driver_state {
+ DRIVER_NORMAL = 0,
+ DRIVER_DISAPPEAR = 1,
+ DRIVER_REPLACE_DONGLE = 2,
+};
+
+struct adapter {
+ int DriverState;/* for disable driver using module, use dongle toi
+ * replace module. */
+ int pid[3];/* process id from UI, 0:wps, 1:hostapd, 2:dhcpcd */
+ int bDongle;/* build-in module or external dongle */
+ u16 chip_type;
+ u16 HardwareType;
+ u16 interface_type;/* USB,SDIO,SPI,PCI */
+
+ struct dvobj_priv *dvobj;
+ struct mlme_priv mlmepriv;
+ struct mlme_ext_priv mlmeextpriv;
+ struct cmd_priv cmdpriv;
+ struct evt_priv evtpriv;
+ struct io_priv iopriv;
+ struct xmit_priv xmitpriv;
+ struct recv_priv recvpriv;
+ struct sta_priv stapriv;
+ struct security_priv securitypriv;
+ struct registry_priv registrypriv;
+ struct pwrctrl_priv pwrctrlpriv;
+ struct eeprom_priv eeprompriv;
+ struct led_priv ledpriv;
+ struct mp_priv mppriv;
+
+#ifdef CONFIG_88EU_AP_MODE
+ struct hostapd_priv *phostapdpriv;
+#endif
+
+ struct wifidirect_info wdinfo;
+
+ void *HalData;
+ u32 hal_data_sz;
+ struct hal_ops HalFunc;
+
+ s32 bDriverStopped;
+ s32 bSurpriseRemoved;
+ s32 bCardDisableWOHSM;
+
+ u32 IsrContent;
+ u32 ImrContent;
+
+ u8 EepromAddressSize;
+ u8 hw_init_completed;
+ u8 bDriverIsGoingToUnload;
+ u8 init_adpt_in_progress;
+ u8 bHaltInProgress;
+ s8 signal_strength;
+
+ void *cmdThread;
+ void *evtThread;
+ void *xmitThread;
+ void *recvThread;
+ void (*intf_start)(struct adapter *adapter);
+ void (*intf_stop)(struct adapter *adapter);
+ struct net_device *pnetdev;
+
+ /* used by rtw_rereg_nd_name related function */
+ struct rereg_nd_name_data {
+ struct net_device *old_pnetdev;
+ char old_ifname[IFNAMSIZ];
+ u8 old_ips_mode;
+ u8 old_bRegUseLed;
+ } rereg_nd_name_priv;
+
+ int bup;
+ struct net_device_stats stats;
+ struct iw_statistics iwstats;
+ struct proc_dir_entry *dir_dev;/* for proc directory */
+
+ int net_closed;
+ u8 bFWReady;
+ u8 bBTFWReady;
+ u8 bReadPortCancel;
+ u8 bWritePortCancel;
+ u8 bRxRSSIDisplay;
+ /* The driver will show up the desired channel number
+ * when this flag is 1. */
+ u8 bNotifyChannelChange;
+#ifdef CONFIG_88EU_P2P
+ /* The driver will show the current P2P status when the
+ * upper application reads it. */
+ u8 bShowGetP2PState;
+#endif
+ struct adapter *pbuddy_adapter;
+
+ struct mutex *hw_init_mutex;
+
+ spinlock_t br_ext_lock;
+ struct nat25_network_db_entry *nethash[NAT25_HASH_SIZE];
+ int pppoe_connection_in_progress;
+ unsigned char pppoe_addr[MACADDRLEN];
+ unsigned char scdb_mac[MACADDRLEN];
+ unsigned char scdb_ip[4];
+ struct nat25_network_db_entry *scdb_entry;
+ unsigned char br_mac[MACADDRLEN];
+ unsigned char br_ip[4];
+ struct br_ext_info ethBrExtInfo;
+
+ u8 fix_rate;
+
+ unsigned char in_cta_test;
+};
+
+#define adapter_to_dvobj(adapter) (adapter->dvobj)
+
+int rtw_handle_dualmac(struct adapter *adapter, bool init);
+
+static inline u8 *myid(struct eeprom_priv *peepriv)
+{
+ return peepriv->mac_addr;
+}
+
+#endif /* __DRV_TYPES_H__ */
diff --git a/drivers/staging/r8188eu/include/drv_types_linux.h b/drivers/staging/r8188eu/include/drv_types_linux.h
new file mode 100644
index 000000000000..f5db1dd14317
--- /dev/null
+++ b/drivers/staging/r8188eu/include/drv_types_linux.h
@@ -0,0 +1,23 @@
+/******************************************************************************
+ *
+ * Copyright(c) 2007 - 2011 Realtek Corporation. All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of version 2 of the GNU General Public License as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
+ * more details.
+ *
+ * You should have received a copy of the GNU General Public License along with
+ * this program; if not, write to the Free Software Foundation, Inc.,
+ * 51 Franklin Street, Fifth Floor, Boston, MA 02110, USA
+ *
+ *
+ ******************************************************************************/
+#ifndef __DRV_TYPES_LINUX_H__
+#define __DRV_TYPES_LINUX_H__
+
+#endif
diff --git a/drivers/staging/r8188eu/include/ethernet.h b/drivers/staging/r8188eu/include/ethernet.h
new file mode 100644
index 000000000000..5b17dcf143a4
--- /dev/null
+++ b/drivers/staging/r8188eu/include/ethernet.h
@@ -0,0 +1,41 @@
+/******************************************************************************
+ *
+ * Copyright(c) 2007 - 2011 Realtek Corporation. All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of version 2 of the GNU General Public License as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
+ * more details.
+ *
+ * You should have received a copy of the GNU General Public License along with
+ * this program; if not, write to the Free Software Foundation, Inc.,
+ * 51 Franklin Street, Fifth Floor, Boston, MA 02110, USA
+ *
+ *
+ ******************************************************************************/
+/*! \file */
+#ifndef __INC_ETHERNET_H
+#define __INC_ETHERNET_H
+
+#define ETHERNET_ADDRESS_LENGTH 6 /* Ethernet Address Length */
+#define ETHERNET_HEADER_SIZE 14 /* Ethernet Header Length */
+#define LLC_HEADER_SIZE 6 /* LLC Header Length */
+#define TYPE_LENGTH_FIELD_SIZE 2 /* Type/Length Size */
+#define MINIMUM_ETHERNET_PACKET_SIZE 60 /* Min Ethernet Packet Size */
+#define MAXIMUM_ETHERNET_PACKET_SIZE 1514 /* Max Ethernet Packet Size */
+
+/* Is Multicast Address? */
+#define RT_ETH_IS_MULTICAST(_addr) ((((u8 *)(_addr))[0]&0x01) != 0)
+#define RT_ETH_IS_BROADCAST(_addr) ( \
+ ((u8 *)(_addr))[0] == 0xff && \
+ ((u8 *)(_addr))[1] == 0xff && \
+ ((u8 *)(_addr))[2] == 0xff && \
+ ((u8 *)(_addr))[3] == 0xff && \
+ ((u8 *)(_addr))[4] == 0xff && \
+ ((u8 *)(_addr))[5] == 0xff) /* Is Broadcast Address? */
+
+#endif /* #ifndef __INC_ETHERNET_H */
diff --git a/drivers/staging/r8188eu/include/h2clbk.h b/drivers/staging/r8188eu/include/h2clbk.h
new file mode 100644
index 000000000000..72b67827bc6e
--- /dev/null
+++ b/drivers/staging/r8188eu/include/h2clbk.h
@@ -0,0 +1,32 @@
+/******************************************************************************
+ *
+ * Copyright(c) 2007 - 2011 Realtek Corporation. All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of version 2 of the GNU General Public License as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
+ * more details.
+ *
+ * You should have received a copy of the GNU General Public License along with
+ * this program; if not, write to the Free Software Foundation, Inc.,
+ * 51 Franklin Street, Fifth Floor, Boston, MA 02110, USA
+ *
+ *
+ ******************************************************************************/
+
+#define _H2CLBK_H_
+
+#include <rtl8711_spec.h>
+#include <TypeDef.h>
+
+void _lbk_cmd(struct adapter *adapter);
+
+void _lbk_rsp(struct adapter *adapter);
+
+void _lbk_evt(IN struct adapter *adapter);
+
+void h2c_event_callback(unsigned char *dev, unsigned char *pbuf);
diff --git a/drivers/staging/r8188eu/include/hal_com.h b/drivers/staging/r8188eu/include/hal_com.h
new file mode 100644
index 000000000000..652f645d54ff
--- /dev/null
+++ b/drivers/staging/r8188eu/include/hal_com.h
@@ -0,0 +1,172 @@
+/******************************************************************************
+ *
+ * Copyright(c) 2007 - 2011 Realtek Corporation. All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of version 2 of the GNU General Public License as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
+ * more details.
+ *
+ * You should have received a copy of the GNU General Public License along with
+ * this program; if not, write to the Free Software Foundation, Inc.,
+ * 51 Franklin Street, Fifth Floor, Boston, MA 02110, USA
+ *
+ *
+ ******************************************************************************/
+#ifndef __HAL_COMMON_H__
+#define __HAL_COMMON_H__
+
+/* */
+/* Rate Definition */
+/* */
+/* CCK */
+#define RATR_1M 0x00000001
+#define RATR_2M 0x00000002
+#define RATR_55M 0x00000004
+#define RATR_11M 0x00000008
+/* OFDM */
+#define RATR_6M 0x00000010
+#define RATR_9M 0x00000020
+#define RATR_12M 0x00000040
+#define RATR_18M 0x00000080
+#define RATR_24M 0x00000100
+#define RATR_36M 0x00000200
+#define RATR_48M 0x00000400
+#define RATR_54M 0x00000800
+/* MCS 1 Spatial Stream */
+#define RATR_MCS0 0x00001000
+#define RATR_MCS1 0x00002000
+#define RATR_MCS2 0x00004000
+#define RATR_MCS3 0x00008000
+#define RATR_MCS4 0x00010000
+#define RATR_MCS5 0x00020000
+#define RATR_MCS6 0x00040000
+#define RATR_MCS7 0x00080000
+/* MCS 2 Spatial Stream */
+#define RATR_MCS8 0x00100000
+#define RATR_MCS9 0x00200000
+#define RATR_MCS10 0x00400000
+#define RATR_MCS11 0x00800000
+#define RATR_MCS12 0x01000000
+#define RATR_MCS13 0x02000000
+#define RATR_MCS14 0x04000000
+#define RATR_MCS15 0x08000000
+
+/* CCK */
+#define RATE_1M BIT(0)
+#define RATE_2M BIT(1)
+#define RATE_5_5M BIT(2)
+#define RATE_11M BIT(3)
+/* OFDM */
+#define RATE_6M BIT(4)
+#define RATE_9M BIT(5)
+#define RATE_12M BIT(6)
+#define RATE_18M BIT(7)
+#define RATE_24M BIT(8)
+#define RATE_36M BIT(9)
+#define RATE_48M BIT(10)
+#define RATE_54M BIT(11)
+/* MCS 1 Spatial Stream */
+#define RATE_MCS0 BIT(12)
+#define RATE_MCS1 BIT(13)
+#define RATE_MCS2 BIT(14)
+#define RATE_MCS3 BIT(15)
+#define RATE_MCS4 BIT(16)
+#define RATE_MCS5 BIT(17)
+#define RATE_MCS6 BIT(18)
+#define RATE_MCS7 BIT(19)
+/* MCS 2 Spatial Stream */
+#define RATE_MCS8 BIT(20)
+#define RATE_MCS9 BIT(21)
+#define RATE_MCS10 BIT(22)
+#define RATE_MCS11 BIT(23)
+#define RATE_MCS12 BIT(24)
+#define RATE_MCS13 BIT(25)
+#define RATE_MCS14 BIT(26)
+#define RATE_MCS15 BIT(27)
+
+/* ALL CCK Rate */
+#define RATE_ALL_CCK (RATR_1M | RATR_2M | RATR_55M | RATR_11M)
+#define RATE_ALL_OFDM_AG (RATR_6M | RATR_9M | RATR_12M | RATR_18M | \
+ RATR_24M | RATR_36M | RATR_48M | RATR_54M)
+#define RATE_ALL_OFDM_1SS (RATR_MCS0 | RATR_MCS1 | RATR_MCS2 | \
+ RATR_MCS3 | RATR_MCS4 | RATR_MCS5|RATR_MCS6 | \
+ RATR_MCS7)
+#define RATE_ALL_OFDM_2SS (RATR_MCS8 | RATR_MCS9 | RATR_MCS10 | \
+ RATR_MCS11 | RATR_MCS12 | RATR_MCS13 | \
+ RATR_MCS14 | RATR_MCS15)
+
+/*------------------------------ Tx Desc definition Macro --------------------*/
+/* pragma mark -- Tx Desc related definition. -- */
+/* Rate */
+/* CCK Rates, TxHT = 0 */
+#define DESC_RATE1M 0x00
+#define DESC_RATE2M 0x01
+#define DESC_RATE5_5M 0x02
+#define DESC_RATE11M 0x03
+
+/* OFDM Rates, TxHT = 0 */
+#define DESC_RATE6M 0x04
+#define DESC_RATE9M 0x05
+#define DESC_RATE12M 0x06
+#define DESC_RATE18M 0x07
+#define DESC_RATE24M 0x08
+#define DESC_RATE36M 0x09
+#define DESC_RATE48M 0x0a
+#define DESC_RATE54M 0x0b
+
+/* MCS Rates, TxHT = 1 */
+#define DESC_RATEMCS0 0x0c
+#define DESC_RATEMCS1 0x0d
+#define DESC_RATEMCS2 0x0e
+#define DESC_RATEMCS3 0x0f
+#define DESC_RATEMCS4 0x10
+#define DESC_RATEMCS5 0x11
+#define DESC_RATEMCS6 0x12
+#define DESC_RATEMCS7 0x13
+#define DESC_RATEMCS8 0x14
+#define DESC_RATEMCS9 0x15
+#define DESC_RATEMCS10 0x16
+#define DESC_RATEMCS11 0x17
+#define DESC_RATEMCS12 0x18
+#define DESC_RATEMCS13 0x19
+#define DESC_RATEMCS14 0x1a
+#define DESC_RATEMCS15 0x1b
+#define DESC_RATEMCS15_SG 0x1c
+#define DESC_RATEMCS32 0x20
+
+/* 1 Byte long (in unit of TU) */
+#define REG_P2P_CTWIN 0x0572
+#define REG_NOA_DESC_SEL 0x05CF
+#define REG_NOA_DESC_DURATION 0x05E0
+#define REG_NOA_DESC_INTERVAL 0x05E4
+#define REG_NOA_DESC_START 0x05E8
+#define REG_NOA_DESC_COUNT 0x05EC
+
+#include "HalVerDef.h"
+void dump_chip_info(struct HAL_VERSION ChipVersion);
+
+/* return the final channel plan decision */
+u8 hal_com_get_channel_plan(struct adapter *padapter,
+ u8 hw_channel_plan,
+ u8 sw_channel_plan,
+ u8 def_channel_plan,
+ bool AutoLoadFail
+);
+
+u8 MRateToHwRate(u8 rate);
+
+void HalSetBrateCfg(struct adapter *Adapter, u8 *mBratesOS, u16 *pBrateCfg);
+
+bool Hal_MappingOutPipe(struct adapter *pAdapter, u8 NumOutPipe);
+
+void hal_init_macaddr(struct adapter *adapter);
+
+void c2h_evt_clear(struct adapter *adapter);
+s32 c2h_evt_read(struct adapter *adapter, u8 *buf);
+
+#endif /* __HAL_COMMON_H__ */
diff --git a/drivers/staging/r8188eu/include/hal_intf.h b/drivers/staging/r8188eu/include/hal_intf.h
new file mode 100644
index 000000000000..49539b862863
--- /dev/null
+++ b/drivers/staging/r8188eu/include/hal_intf.h
@@ -0,0 +1,430 @@
+/******************************************************************************
+ *
+ * Copyright(c) 2007 - 2012 Realtek Corporation. All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of version 2 of the GNU General Public License as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
+ * more details.
+ *
+ * You should have received a copy of the GNU General Public License along with
+ * this program; if not, write to the Free Software Foundation, Inc.,
+ * 51 Franklin Street, Fifth Floor, Boston, MA 02110, USA
+ *
+ *
+ ******************************************************************************/
+#ifndef __HAL_INTF_H__
+#define __HAL_INTF_H__
+
+#include <osdep_service.h>
+#include <drv_types.h>
+#include <Hal8188EPhyCfg.h>
+
+enum RTL871X_HCI_TYPE {
+ RTW_PCIE = BIT0,
+ RTW_USB = BIT1,
+ RTW_SDIO = BIT2,
+ RTW_GSPI = BIT3,
+};
+
+enum _CHIP_TYPE {
+ NULL_CHIP_TYPE,
+ RTL8712_8188S_8191S_8192S,
+ RTL8188C_8192C,
+ RTL8192D,
+ RTL8723A,
+ RTL8188E,
+ MAX_CHIP_TYPE
+};
+
+enum hw_variables {
+ HW_VAR_MEDIA_STATUS,
+ HW_VAR_MEDIA_STATUS1,
+ HW_VAR_SET_OPMODE,
+ HW_VAR_MAC_ADDR,
+ HW_VAR_BSSID,
+ HW_VAR_INIT_RTS_RATE,
+ HW_VAR_BASIC_RATE,
+ HW_VAR_TXPAUSE,
+ HW_VAR_BCN_FUNC,
+ HW_VAR_CORRECT_TSF,
+ HW_VAR_CHECK_BSSID,
+ HW_VAR_MLME_DISCONNECT,
+ HW_VAR_MLME_SITESURVEY,
+ HW_VAR_MLME_JOIN,
+ HW_VAR_BEACON_INTERVAL,
+ HW_VAR_SLOT_TIME,
+ HW_VAR_RESP_SIFS,
+ HW_VAR_ACK_PREAMBLE,
+ HW_VAR_SEC_CFG,
+ HW_VAR_BCN_VALID,
+ HW_VAR_RF_TYPE,
+ HW_VAR_DM_FLAG,
+ HW_VAR_DM_FUNC_OP,
+ HW_VAR_DM_FUNC_SET,
+ HW_VAR_DM_FUNC_CLR,
+ HW_VAR_CAM_EMPTY_ENTRY,
+ HW_VAR_CAM_INVALID_ALL,
+ HW_VAR_CAM_WRITE,
+ HW_VAR_CAM_READ,
+ HW_VAR_AC_PARAM_VO,
+ HW_VAR_AC_PARAM_VI,
+ HW_VAR_AC_PARAM_BE,
+ HW_VAR_AC_PARAM_BK,
+ HW_VAR_ACM_CTRL,
+ HW_VAR_AMPDU_MIN_SPACE,
+ HW_VAR_AMPDU_FACTOR,
+ HW_VAR_RXDMA_AGG_PG_TH,
+ HW_VAR_SET_RPWM,
+ HW_VAR_H2C_FW_PWRMODE,
+ HW_VAR_H2C_FW_JOINBSSRPT,
+ HW_VAR_FWLPS_RF_ON,
+ HW_VAR_H2C_FW_P2P_PS_OFFLOAD,
+ HW_VAR_TDLS_WRCR,
+ HW_VAR_TDLS_INIT_CH_SEN,
+ HW_VAR_TDLS_RS_RCR,
+ HW_VAR_TDLS_DONE_CH_SEN,
+ HW_VAR_INITIAL_GAIN,
+ HW_VAR_TRIGGER_GPIO_0,
+ HW_VAR_BT_SET_COEXIST,
+ HW_VAR_BT_ISSUE_DELBA,
+ HW_VAR_CURRENT_ANTENNA,
+ HW_VAR_ANTENNA_DIVERSITY_LINK,
+ HW_VAR_ANTENNA_DIVERSITY_SELECT,
+ HW_VAR_SWITCH_EPHY_WoWLAN,
+ HW_VAR_EFUSE_USAGE,
+ HW_VAR_EFUSE_BYTES,
+ HW_VAR_EFUSE_BT_USAGE,
+ HW_VAR_EFUSE_BT_BYTES,
+ HW_VAR_FIFO_CLEARN_UP,
+ HW_VAR_CHECK_TXBUF,
+ HW_VAR_APFM_ON_MAC, /* Auto FSM to Turn On, include clock, isolation,
+ * power control for MAC only */
+ /* The valid upper nav range for the HW updating, if the true value is
+ * larger than the upper range, the HW won't update it. */
+ /* Unit in microsecond. 0 means disable this function. */
+ HW_VAR_NAV_UPPER,
+ HW_VAR_RPT_TIMER_SETTING,
+ HW_VAR_TX_RPT_MAX_MACID,
+ HW_VAR_H2C_MEDIA_STATUS_RPT,
+ HW_VAR_CHK_HI_QUEUE_EMPTY,
+};
+
+enum hal_def_variable {
+ HAL_DEF_UNDERCORATEDSMOOTHEDPWDB,
+ HAL_DEF_IS_SUPPORT_ANT_DIV,
+ HAL_DEF_CURRENT_ANTENNA,
+ HAL_DEF_DRVINFO_SZ,
+ HAL_DEF_MAX_RECVBUF_SZ,
+ HAL_DEF_RX_PACKET_OFFSET,
+ HAL_DEF_DBG_DUMP_RXPKT,/* for dbg */
+ HAL_DEF_DBG_DM_FUNC,/* for dbg */
+ HAL_DEF_RA_DECISION_RATE,
+ HAL_DEF_RA_SGI,
+ HAL_DEF_PT_PWR_STATUS,
+ HW_VAR_MAX_RX_AMPDU_FACTOR,
+ HW_DEF_RA_INFO_DUMP,
+ HAL_DEF_DBG_DUMP_TXPKT,
+ HW_DEF_FA_CNT_DUMP,
+ HW_DEF_ODM_DBG_FLAG,
+};
+
+enum hal_odm_variable {
+ HAL_ODM_STA_INFO,
+ HAL_ODM_P2P_STATE,
+ HAL_ODM_WIFI_DISPLAY_STATE,
+};
+
+enum hal_intf_ps_func {
+ HAL_USB_SELECT_SUSPEND,
+ HAL_MAX_ID,
+};
+
+typedef s32 (*c2h_id_filter)(u8 id);
+
+struct hal_ops {
+ u32 (*hal_power_on)(struct adapter *padapter);
+ u32 (*hal_init)(struct adapter *padapter);
+ u32 (*hal_deinit)(struct adapter *padapter);
+
+ void (*free_hal_data)(struct adapter *padapter);
+
+ u32 (*inirp_init)(struct adapter *padapter);
+ u32 (*inirp_deinit)(struct adapter *padapter);
+
+ s32 (*init_xmit_priv)(struct adapter *padapter);
+ void (*free_xmit_priv)(struct adapter *padapter);
+
+ s32 (*init_recv_priv)(struct adapter *padapter);
+ void (*free_recv_priv)(struct adapter *padapter);
+
+ void (*InitSwLeds)(struct adapter *padapter);
+ void (*DeInitSwLeds)(struct adapter *padapter);
+
+ void (*dm_init)(struct adapter *padapter);
+ void (*dm_deinit)(struct adapter *padapter);
+ void (*read_chip_version)(struct adapter *padapter);
+
+ void (*init_default_value)(struct adapter *padapter);
+
+ void (*intf_chip_configure)(struct adapter *padapter);
+
+ void (*read_adapter_info)(struct adapter *padapter);
+
+ void (*enable_interrupt)(struct adapter *padapter);
+ void (*disable_interrupt)(struct adapter *padapter);
+ s32 (*interrupt_handler)(struct adapter *padapter);
+
+ void (*set_bwmode_handler)(struct adapter *padapter,
+ enum ht_channel_width Bandwidth,
+ u8 Offset);
+ void (*set_channel_handler)(struct adapter *padapter, u8 channel);
+
+ void (*hal_dm_watchdog)(struct adapter *padapter);
+
+ void (*SetHwRegHandler)(struct adapter *padapter, u8 variable,
+ u8 *val);
+ void (*GetHwRegHandler)(struct adapter *padapter, u8 variable,
+ u8 *val);
+
+ u8 (*GetHalDefVarHandler)(struct adapter *padapter,
+ enum hal_def_variable eVariable,
+ void *pValue);
+ u8 (*SetHalDefVarHandler)(struct adapter *padapter,
+ enum hal_def_variable eVariable,
+ void *pValue);
+
+ void (*GetHalODMVarHandler)(struct adapter *padapter,
+ enum hal_odm_variable eVariable,
+ void *pValue1, bool bSet);
+ void (*SetHalODMVarHandler)(struct adapter *padapter,
+ enum hal_odm_variable eVariable,
+ void *pValue1, bool bSet);
+
+ void (*UpdateRAMaskHandler)(struct adapter *padapter,
+ u32 mac_id, u8 rssi_level);
+ void (*SetBeaconRelatedRegistersHandler)(struct adapter *padapter);
+
+ void (*Add_RateATid)(struct adapter *adapter, u32 bitmap, u8 arg,
+ u8 rssi_level);
+ void (*run_thread)(struct adapter *adapter);
+ void (*cancel_thread)(struct adapter *adapter);
+
+ u8 (*AntDivBeforeLinkHandler)(struct adapter *adapter);
+ void (*AntDivCompareHandler)(struct adapter *adapter,
+ struct wlan_bssid_ex *dst,
+ struct wlan_bssid_ex *src);
+ u8 (*interface_ps_func)(struct adapter *padapter,
+ enum hal_intf_ps_func efunc_id, u8 *val);
+
+ s32 (*hal_xmit)(struct adapter *padapter,
+ struct xmit_frame *pxmitframe);
+ s32 (*mgnt_xmit)(struct adapter *padapter,
+ struct xmit_frame *pmgntframe);
+ s32 (*hal_xmitframe_enqueue)(struct adapter *padapter,
+ struct xmit_frame *pxmitframe);
+
+ u32 (*read_bbreg)(struct adapter *padapter, u32 RegAddr,
+ u32 BitMask);
+ void (*write_bbreg)(struct adapter *padapter, u32 RegAddr,
+ u32 BitMask, u32 Data);
+ u32 (*read_rfreg)(struct adapter *padapter,
+ enum rf_radio_path eRFPath, u32 RegAddr,
+ u32 BitMask);
+ void (*write_rfreg)(struct adapter *padapter,
+ enum rf_radio_path eRFPath, u32 RegAddr,
+ u32 BitMask, u32 Data);
+
+ void (*EfusePowerSwitch)(struct adapter *padapter, u8 bWrite,
+ u8 PwrState);
+ void (*ReadEFuse)(struct adapter *padapter, u8 efuseType, u16 _offset,
+ u16 _size_byte, u8 *pbuf, bool bPseudoTest);
+ void (*EFUSEGetEfuseDefinition)(struct adapter *padapter, u8 efuseType,
+ u8 type, void *pOut, bool bPseudoTest);
+ u16 (*EfuseGetCurrentSize)(struct adapter *padapter, u8 efuseType,
+ bool bPseudoTest);
+ int (*Efuse_PgPacketRead)(struct adapter *adapter, u8 offset,
+ u8 *data, bool bPseudoTest);
+ int (*Efuse_PgPacketWrite)(struct adapter *padapter, u8 offset,
+ u8 word_en, u8 *data, bool bPseudoTest);
+ u8 (*Efuse_WordEnableDataWrite)(struct adapter *padapter,
+ u16 efuse_addr, u8 word_en,
+ u8 *data, bool bPseudoTest);
+ bool (*Efuse_PgPacketWrite_BT)(struct adapter *padapter, u8 offset,
+ u8 word_en, u8 *data, bool test);
+
+ void (*sreset_init_value)(struct adapter *padapter);
+ void (*sreset_reset_value)(struct adapter *padapter);
+ void (*silentreset)(struct adapter *padapter);
+ void (*sreset_xmit_status_check)(struct adapter *padapter);
+ void (*sreset_linked_status_check) (struct adapter *padapter);
+ u8 (*sreset_get_wifi_status)(struct adapter *padapter);
+
+ int (*IOL_exec_cmds_sync)(struct adapter *padapter,
+ struct xmit_frame *frame, u32 max_wait,
+ u32 bndy_cnt);
+
+ void (*hal_notch_filter)(struct adapter *adapter, bool enable);
+ void (*hal_reset_security_engine)(struct adapter *adapter);
+ s32 (*c2h_handler)(struct adapter *padapter,
+ struct c2h_evt_hdr *c2h_evt);
+ c2h_id_filter c2h_id_filter_ccx;
+};
+
+enum rt_eeprom_type {
+ EEPROM_93C46,
+ EEPROM_93C56,
+ EEPROM_BOOT_EFUSE,
+};
+
+#define RF_CHANGE_BY_INIT 0
+#define RF_CHANGE_BY_IPS BIT28
+#define RF_CHANGE_BY_PS BIT29
+#define RF_CHANGE_BY_HW BIT30
+#define RF_CHANGE_BY_SW BIT31
+
+enum hardware_type {
+ HARDWARE_TYPE_RTL8180,
+ HARDWARE_TYPE_RTL8185,
+ HARDWARE_TYPE_RTL8187,
+ HARDWARE_TYPE_RTL8188,
+ HARDWARE_TYPE_RTL8190P,
+ HARDWARE_TYPE_RTL8192E,
+ HARDWARE_TYPE_RTL819xU,
+ HARDWARE_TYPE_RTL8192SE,
+ HARDWARE_TYPE_RTL8192SU,
+ HARDWARE_TYPE_RTL8192CE,
+ HARDWARE_TYPE_RTL8192CU,
+ HARDWARE_TYPE_RTL8192DE,
+ HARDWARE_TYPE_RTL8192DU,
+ HARDWARE_TYPE_RTL8723AE,
+ HARDWARE_TYPE_RTL8723AU,
+ HARDWARE_TYPE_RTL8723AS,
+ HARDWARE_TYPE_RTL8188EE,
+ HARDWARE_TYPE_RTL8188EU,
+ HARDWARE_TYPE_RTL8188ES,
+ HARDWARE_TYPE_MAX,
+};
+
+/* RTL8188E Series */
+#define IS_HARDWARE_TYPE_8188EE(_Adapter) \
+(((struct adapter *)_Adapter)->HardwareType == HARDWARE_TYPE_RTL8188EE)
+#define IS_HARDWARE_TYPE_8188EU(_Adapter) \
+(((struct adapter *)_Adapter)->HardwareType == HARDWARE_TYPE_RTL8188EU)
+#define IS_HARDWARE_TYPE_8188ES(_Adapter) \
+(((struct adapter *)_Adapter)->HardwareType == HARDWARE_TYPE_RTL8188ES)
+#define IS_HARDWARE_TYPE_8188E(_Adapter) \
+(IS_HARDWARE_TYPE_8188EE(_Adapter) || IS_HARDWARE_TYPE_8188EU(_Adapter) || \
+ IS_HARDWARE_TYPE_8188ES(_Adapter))
+
+#define GET_EEPROM_EFUSE_PRIV(adapter) (&adapter->eeprompriv)
+
+#define is_boot_from_eeprom(adapter) (adapter->eeprompriv.EepromOrEfuse)
+
+void rtw_hal_def_value_init(struct adapter *padapter);
+
+void rtw_hal_free_data(struct adapter *padapter);
+
+void rtw_hal_dm_init(struct adapter *padapter);
+void rtw_hal_dm_deinit(struct adapter *padapter);
+void rtw_hal_sw_led_init(struct adapter *padapter);
+void rtw_hal_sw_led_deinit(struct adapter *padapter);
+
+u32 rtw_hal_power_on(struct adapter *padapter);
+uint rtw_hal_init(struct adapter *padapter);
+uint rtw_hal_deinit(struct adapter *padapter);
+void rtw_hal_stop(struct adapter *padapter);
+void rtw_hal_set_hwreg(struct adapter *padapter, u8 variable, u8 *val);
+void rtw_hal_get_hwreg(struct adapter *padapter, u8 variable, u8 *val);
+
+void rtw_hal_chip_configure(struct adapter *padapter);
+void rtw_hal_read_chip_info(struct adapter *padapter);
+void rtw_hal_read_chip_version(struct adapter *padapter);
+
+u8 rtw_hal_set_def_var(struct adapter *padapter,
+ enum hal_def_variable eVariable, void *pValue);
+u8 rtw_hal_get_def_var(struct adapter *padapter,
+ enum hal_def_variable eVariable, void *pValue);
+
+void rtw_hal_set_odm_var(struct adapter *padapter,
+ enum hal_odm_variable eVariable, void *pValue1,
+ bool bSet);
+void rtw_hal_get_odm_var(struct adapter *padapter,
+ enum hal_odm_variable eVariable,
+ void *pValue1, bool bSet);
+
+void rtw_hal_enable_interrupt(struct adapter *padapter);
+void rtw_hal_disable_interrupt(struct adapter *padapter);
+
+u32 rtw_hal_inirp_init(struct adapter *padapter);
+u32 rtw_hal_inirp_deinit(struct adapter *padapter);
+
+u8 rtw_hal_intf_ps_func(struct adapter *padapter,
+ enum hal_intf_ps_func efunc_id, u8 *val);
+s32 rtw_hal_xmitframe_enqueue(struct adapter *padapter,
+ struct xmit_frame *pxmitframe);
+
+s32 rtw_hal_xmit(struct adapter *padapter, struct xmit_frame *pxmitframe);
+s32 rtw_hal_mgnt_xmit(struct adapter *padapter,
+ struct xmit_frame *pmgntframe);
+
+s32 rtw_hal_init_xmit_priv(struct adapter *padapter);
+void rtw_hal_free_xmit_priv(struct adapter *padapter);
+
+s32 rtw_hal_init_recv_priv(struct adapter *padapter);
+void rtw_hal_free_recv_priv(struct adapter *padapter);
+
+void rtw_hal_update_ra_mask(struct adapter *padapter, u32 mac_id, u8 level);
+void rtw_hal_add_ra_tid(struct adapter *adapt, u32 bitmap, u8 arg, u8 level);
+void rtw_hal_clone_data(struct adapter *dst_adapt,
+ struct adapter *src_adapt);
+void rtw_hal_start_thread(struct adapter *padapter);
+void rtw_hal_stop_thread(struct adapter *padapter);
+
+void rtw_hal_bcn_related_reg_setting(struct adapter *padapter);
+
+u32 rtw_hal_read_bbreg(struct adapter *padapter, u32 RegAddr, u32 BitMask);
+void rtw_hal_write_bbreg(struct adapter *padapter, u32 RegAddr, u32 BitMask,
+ u32 Data);
+u32 rtw_hal_read_rfreg(struct adapter *padapter, enum rf_radio_path eRFPath,
+ u32 RegAddr, u32 BitMask);
+void rtw_hal_write_rfreg(struct adapter *padapter,
+ enum rf_radio_path eRFPath, u32 RegAddr,
+ u32 BitMask, u32 Data);
+
+s32 rtw_hal_interrupt_handler(struct adapter *padapter);
+
+void rtw_hal_set_bwmode(struct adapter *padapter,
+ enum ht_channel_width Bandwidth, u8 Offset);
+void rtw_hal_set_chan(struct adapter *padapter, u8 channel);
+void rtw_hal_dm_watchdog(struct adapter *padapter);
+
+u8 rtw_hal_antdiv_before_linked(struct adapter *padapter);
+void rtw_hal_antdiv_rssi_compared(struct adapter *padapter,
+ struct wlan_bssid_ex *dst,
+ struct wlan_bssid_ex *src);
+
+void rtw_hal_sreset_init(struct adapter *padapter);
+void rtw_hal_sreset_reset(struct adapter *padapter);
+void rtw_hal_sreset_reset_value(struct adapter *padapter);
+void rtw_hal_sreset_xmit_status_check(struct adapter *padapter);
+void rtw_hal_sreset_linked_status_check(struct adapter *padapter);
+u8 rtw_hal_sreset_get_wifi_status(struct adapter *padapter);
+
+int rtw_hal_iol_cmd(struct adapter *adapter, struct xmit_frame *xmit_frame,
+ u32 max_wating_ms, u32 bndy_cnt);
+
+void rtw_hal_notch_filter(struct adapter *adapter, bool enable);
+void rtw_hal_reset_security_engine(struct adapter *adapter);
+
+s32 rtw_hal_c2h_handler(struct adapter *adapter,
+ struct c2h_evt_hdr *c2h_evt);
+c2h_id_filter rtw_hal_c2h_id_filter_ccx(struct adapter *adapter);
+void indicate_wx_scan_complete_event(struct adapter *padapter);
+u8 rtw_do_join(struct adapter *padapter);
+
+#endif /* __HAL_INTF_H__ */
diff --git a/drivers/staging/r8188eu/include/ieee80211.h b/drivers/staging/r8188eu/include/ieee80211.h
new file mode 100644
index 000000000000..0e6beaebeb0f
--- /dev/null
+++ b/drivers/staging/r8188eu/include/ieee80211.h
@@ -0,0 +1,1261 @@
+/******************************************************************************
+ *
+ * Copyright(c) 2007 - 2011 Realtek Corporation. All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of version 2 of the GNU General Public License as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
+ * more details.
+ *
+ * You should have received a copy of the GNU General Public License along with
+ * this program; if not, write to the Free Software Foundation, Inc.,
+ * 51 Franklin Street, Fifth Floor, Boston, MA 02110, USA
+ *
+ *
+ ******************************************************************************/
+#ifndef __IEEE80211_H
+#define __IEEE80211_H
+
+#include <osdep_service.h>
+#include <drv_types.h>
+#include "wifi.h"
+#include <linux/wireless.h>
+
+#define MGMT_QUEUE_NUM 5
+
+#define ETH_ALEN 6
+#define ETH_TYPE_LEN 2
+#define PAYLOAD_TYPE_LEN 1
+
+#ifdef CONFIG_88EU_AP_MODE
+
+#define RTL_IOCTL_HOSTAPD (SIOCIWFIRSTPRIV + 28)
+
+/* RTL871X_IOCTL_HOSTAPD ioctl() cmd: */
+enum {
+ RTL871X_HOSTAPD_FLUSH = 1,
+ RTL871X_HOSTAPD_ADD_STA = 2,
+ RTL871X_HOSTAPD_REMOVE_STA = 3,
+ RTL871X_HOSTAPD_GET_INFO_STA = 4,
+ /* REMOVED: PRISM2_HOSTAPD_RESET_TXEXC_STA = 5, */
+ RTL871X_HOSTAPD_GET_WPAIE_STA = 5,
+ RTL871X_SET_ENCRYPTION = 6,
+ RTL871X_GET_ENCRYPTION = 7,
+ RTL871X_HOSTAPD_SET_FLAGS_STA = 8,
+ RTL871X_HOSTAPD_GET_RID = 9,
+ RTL871X_HOSTAPD_SET_RID = 10,
+ RTL871X_HOSTAPD_SET_ASSOC_AP_ADDR = 11,
+ RTL871X_HOSTAPD_SET_GENERIC_ELEMENT = 12,
+ RTL871X_HOSTAPD_MLME = 13,
+ RTL871X_HOSTAPD_SCAN_REQ = 14,
+ RTL871X_HOSTAPD_STA_CLEAR_STATS = 15,
+ RTL871X_HOSTAPD_SET_BEACON = 16,
+ RTL871X_HOSTAPD_SET_WPS_BEACON = 17,
+ RTL871X_HOSTAPD_SET_WPS_PROBE_RESP = 18,
+ RTL871X_HOSTAPD_SET_WPS_ASSOC_RESP = 19,
+ RTL871X_HOSTAPD_SET_HIDDEN_SSID = 20,
+ RTL871X_HOSTAPD_SET_MACADDR_ACL = 21,
+ RTL871X_HOSTAPD_ACL_ADD_STA = 22,
+ RTL871X_HOSTAPD_ACL_REMOVE_STA = 23,
+};
+
+/* STA flags */
+#define WLAN_STA_AUTH BIT(0)
+#define WLAN_STA_ASSOC BIT(1)
+#define WLAN_STA_PS BIT(2)
+#define WLAN_STA_TIM BIT(3)
+#define WLAN_STA_PERM BIT(4)
+#define WLAN_STA_AUTHORIZED BIT(5)
+#define WLAN_STA_PENDING_POLL BIT(6) /* pending activity poll not ACKed */
+#define WLAN_STA_SHORT_PREAMBLE BIT(7)
+#define WLAN_STA_PREAUTH BIT(8)
+#define WLAN_STA_WME BIT(9)
+#define WLAN_STA_MFP BIT(10)
+#define WLAN_STA_HT BIT(11)
+#define WLAN_STA_WPS BIT(12)
+#define WLAN_STA_MAYBE_WPS BIT(13)
+#define WLAN_STA_NONERP BIT(31)
+
+#endif
+
+#define IEEE_CMD_SET_WPA_PARAM 1
+#define IEEE_CMD_SET_WPA_IE 2
+#define IEEE_CMD_SET_ENCRYPTION 3
+#define IEEE_CMD_MLME 4
+
+#define IEEE_PARAM_WPA_ENABLED 1
+#define IEEE_PARAM_TKIP_COUNTERMEASURES 2
+#define IEEE_PARAM_DROP_UNENCRYPTED 3
+#define IEEE_PARAM_PRIVACY_INVOKED 4
+#define IEEE_PARAM_AUTH_ALGS 5
+#define IEEE_PARAM_IEEE_802_1X 6
+#define IEEE_PARAM_WPAX_SELECT 7
+
+#define AUTH_ALG_OPEN_SYSTEM 0x1
+#define AUTH_ALG_SHARED_KEY 0x2
+#define AUTH_ALG_LEAP 0x00000004
+
+#define IEEE_MLME_STA_DEAUTH 1
+#define IEEE_MLME_STA_DISASSOC 2
+
+#define IEEE_CRYPT_ERR_UNKNOWN_ALG 2
+#define IEEE_CRYPT_ERR_UNKNOWN_ADDR 3
+#define IEEE_CRYPT_ERR_CRYPT_INIT_FAILED 4
+#define IEEE_CRYPT_ERR_KEY_SET_FAILED 5
+#define IEEE_CRYPT_ERR_TX_KEY_SET_FAILED 6
+#define IEEE_CRYPT_ERR_CARD_CONF_FAILED 7
+
+#define IEEE_CRYPT_ALG_NAME_LEN 16
+
+#define WPA_CIPHER_NONE BIT(0)
+#define WPA_CIPHER_WEP40 BIT(1)
+#define WPA_CIPHER_WEP104 BIT(2)
+#define WPA_CIPHER_TKIP BIT(3)
+#define WPA_CIPHER_CCMP BIT(4)
+
+
+#define WPA_SELECTOR_LEN 4
+extern u8 RTW_WPA_OUI_TYPE[];
+extern u16 RTW_WPA_VERSION;
+extern u8 WPA_AUTH_KEY_MGMT_NONE[];
+extern u8 WPA_AUTH_KEY_MGMT_UNSPEC_802_1X[];
+extern u8 WPA_AUTH_KEY_MGMT_PSK_OVER_802_1X[];
+extern u8 WPA_CIPHER_SUITE_NONE[];
+extern u8 WPA_CIPHER_SUITE_WEP40[];
+extern u8 WPA_CIPHER_SUITE_TKIP[];
+extern u8 WPA_CIPHER_SUITE_WRAP[];
+extern u8 WPA_CIPHER_SUITE_CCMP[];
+extern u8 WPA_CIPHER_SUITE_WEP104[];
+
+#define RSN_HEADER_LEN 4
+#define RSN_SELECTOR_LEN 4
+
+extern u16 RSN_VERSION_BSD;
+extern u8 RSN_AUTH_KEY_MGMT_UNSPEC_802_1X[];
+extern u8 RSN_AUTH_KEY_MGMT_PSK_OVER_802_1X[];
+extern u8 RSN_CIPHER_SUITE_NONE[];
+extern u8 RSN_CIPHER_SUITE_WEP40[];
+extern u8 RSN_CIPHER_SUITE_TKIP[];
+extern u8 RSN_CIPHER_SUITE_WRAP[];
+extern u8 RSN_CIPHER_SUITE_CCMP[];
+extern u8 RSN_CIPHER_SUITE_WEP104[];
+
+enum ratr_table_mode {
+ RATR_INX_WIRELESS_NGB = 0, /* BGN 40 Mhz 2SS 1SS */
+ RATR_INX_WIRELESS_NG = 1, /* GN or N */
+ RATR_INX_WIRELESS_NB = 2, /* BGN 20 Mhz 2SS 1SS or BN */
+ RATR_INX_WIRELESS_N = 3,
+ RATR_INX_WIRELESS_GB = 4,
+ RATR_INX_WIRELESS_G = 5,
+ RATR_INX_WIRELESS_B = 6,
+ RATR_INX_WIRELESS_MC = 7,
+ RATR_INX_WIRELESS_AC_N = 8,
+};
+
+enum NETWORK_TYPE {
+ WIRELESS_INVALID = 0,
+ /* Sub-Element */
+ WIRELESS_11B = BIT(0), /* tx:cck only, rx:cck only, hw: cck */
+ WIRELESS_11G = BIT(1), /* tx:ofdm only, rx:ofdm & cck, hw:cck & ofdm*/
+ WIRELESS_11A = BIT(2), /* tx:ofdm only, rx: ofdm only, hw:ofdm only */
+ WIRELESS_11_24N = BIT(3), /* tx:MCS only, rx:MCS & cck, hw:MCS & cck */
+ WIRELESS_11_5N = BIT(4), /* tx:MCS only, rx:MCS & ofdm, hw:ofdm only */
+ WIRELESS_AC = BIT(6),
+
+ /* Combination */
+ /* tx: cck & ofdm, rx: cck & ofdm & MCS, hw: cck & ofdm */
+ WIRELESS_11BG = (WIRELESS_11B | WIRELESS_11G),
+ /* tx: ofdm & MCS, rx: ofdm & cck & MCS, hw: cck & ofdm */
+ WIRELESS_11G_24N = (WIRELESS_11G | WIRELESS_11_24N),
+ /* tx: ofdm & MCS, rx: ofdm & MCS, hw: ofdm only */
+ WIRELESS_11A_5N = (WIRELESS_11A | WIRELESS_11_5N),
+ /* tx: ofdm & cck & MCS, rx: ofdm & cck & MCS, hw: ofdm & cck */
+ WIRELESS_11BG_24N = (WIRELESS_11B | WIRELESS_11G | WIRELESS_11_24N),
+ /* tx: ofdm & MCS, rx: ofdm & MCS, hw: ofdm only */
+ WIRELESS_11AGN = (WIRELESS_11A | WIRELESS_11G | WIRELESS_11_24N |
+ WIRELESS_11_5N),
+ WIRELESS_11ABGN = (WIRELESS_11A | WIRELESS_11B | WIRELESS_11G |
+ WIRELESS_11_24N | WIRELESS_11_5N),
+};
+
+#define SUPPORTED_24G_NETTYPE_MSK \
+ (WIRELESS_11B | WIRELESS_11G | WIRELESS_11_24N)
+#define SUPPORTED_5G_NETTYPE_MSK \
+ (WIRELESS_11A | WIRELESS_11_5N)
+
+#define IsSupported24G(NetType) \
+ ((NetType) & SUPPORTED_24G_NETTYPE_MSK ? true : false)
+#define IsSupported5G(NetType) \
+ ((NetType) & SUPPORTED_5G_NETTYPE_MSK ? true : false)
+
+#define IsEnableHWCCK(NetType) \
+ IsSupported24G(NetType)
+#define IsEnableHWOFDM(NetType) \
+ ((NetType) & (WIRELESS_11G | WIRELESS_11_24N | \
+ SUPPORTED_5G_NETTYPE_MSK) ? true : false)
+
+#define IsSupportedRxCCK(NetType) IsEnableHWCCK(NetType)
+#define IsSupportedRxOFDM(NetType) IsEnableHWOFDM(NetType)
+#define IsSupportedRxMCS(NetType) IsEnableHWOFDM(NetType)
+
+#define IsSupportedTxCCK(NetType) \
+ ((NetType) & (WIRELESS_11B) ? true : false)
+#define IsSupportedTxOFDM(NetType) \
+ ((NetType) & (WIRELESS_11G|WIRELESS_11A) ? true : false)
+#define IsSupportedTxMCS(NetType) \
+ ((NetType) & (WIRELESS_11_24N|WIRELESS_11_5N) ? true : false)
+
+struct ieee_param {
+ u32 cmd;
+ u8 sta_addr[ETH_ALEN];
+ union {
+ struct {
+ u8 name;
+ u32 value;
+ } wpa_param;
+ struct {
+ u32 len;
+ u8 reserved[32];
+ u8 data[0];
+ } wpa_ie;
+ struct {
+ int command;
+ int reason_code;
+ } mlme;
+ struct {
+ u8 alg[IEEE_CRYPT_ALG_NAME_LEN];
+ u8 set_tx;
+ u32 err;
+ u8 idx;
+ u8 seq[8]; /* sequence counter (set: RX, get: TX) */
+ u16 key_len;
+ u8 key[0];
+ } crypt;
+#ifdef CONFIG_88EU_AP_MODE
+ struct {
+ u16 aid;
+ u16 capability;
+ int flags;
+ u8 tx_supp_rates[16];
+ struct ieee80211_ht_cap ht_cap;
+ } add_sta;
+ struct {
+ u8 reserved[2];/* for set max_num_sta */
+ u8 buf[0];
+ } bcn_ie;
+#endif
+
+ } u;
+};
+
+#ifdef CONFIG_88EU_AP_MODE
+struct ieee_param_ex {
+ u32 cmd;
+ u8 sta_addr[ETH_ALEN];
+ u8 data[0];
+};
+
+struct sta_data {
+ u16 aid;
+ u16 capability;
+ int flags;
+ u32 sta_set;
+ u8 tx_supp_rates[16];
+ u32 tx_supp_rates_len;
+ struct ieee80211_ht_cap ht_cap;
+ u64 rx_pkts;
+ u64 rx_bytes;
+ u64 rx_drops;
+ u64 tx_pkts;
+ u64 tx_bytes;
+ u64 tx_drops;
+};
+#endif
+
+#define IEEE80211_DATA_LEN 2304
+/* Maximum size for the MA-UNITDATA primitive, 802.11 standard section
+ 6.2.1.1.2.
+
+ The figure in section 7.1.2 suggests a body size of up to 2312
+ bytes is allowed, which is a bit confusing, I suspect this
+ represents the 2304 bytes of real data, plus a possible 8 bytes of
+ WEP IV and ICV. (this interpretation suggested by Ramiro Barreiro) */
+
+#define IEEE80211_HLEN 30
+#define IEEE80211_FRAME_LEN (IEEE80211_DATA_LEN + IEEE80211_HLEN)
+
+/* this is stolen from ipw2200 driver */
+#define IEEE_IBSS_MAC_HASH_SIZE 31
+
+struct ieee_ibss_seq {
+ u8 mac[ETH_ALEN];
+ u16 seq_num;
+ u16 frag_num;
+ unsigned long packet_time;
+ struct list_head list;
+};
+
+struct rtw_ieee80211_hdr {
+ __le16 frame_ctl;
+ __le16 duration_id;
+ u8 addr1[ETH_ALEN];
+ u8 addr2[ETH_ALEN];
+ u8 addr3[ETH_ALEN];
+ u16 seq_ctl;
+ u8 addr4[ETH_ALEN];
+} __packed;
+
+struct rtw_ieee80211_hdr_3addr {
+ __le16 frame_ctl;
+ __le16 duration_id;
+ u8 addr1[ETH_ALEN];
+ u8 addr2[ETH_ALEN];
+ u8 addr3[ETH_ALEN];
+ u16 seq_ctl;
+} __packed;
+
+struct rtw_ieee80211_hdr_qos {
+ __le16 frame_ctl;
+ __le16 duration_id;
+ u8 addr1[ETH_ALEN];
+ u8 addr2[ETH_ALEN];
+ u8 addr3[ETH_ALEN];
+ u16 seq_ctl;
+ u8 addr4[ETH_ALEN];
+ u16 qc;
+} __packed;
+
+struct rtw_ieee80211_hdr_3addr_qos {
+ __le16 frame_ctl;
+ __le16 duration_id;
+ u8 addr1[ETH_ALEN];
+ u8 addr2[ETH_ALEN];
+ u8 addr3[ETH_ALEN];
+ u16 seq_ctl;
+ u16 qc;
+} __packed;
+
+struct eapol {
+ u8 snap[6];
+ u16 ethertype;
+ u8 version;
+ u8 type;
+ u16 length;
+} __packed;
+
+enum eap_type {
+ EAP_PACKET = 0,
+ EAPOL_START,
+ EAPOL_LOGOFF,
+ EAPOL_KEY,
+ EAPOL_ENCAP_ASF_ALERT
+};
+
+#define IEEE80211_3ADDR_LEN 24
+#define IEEE80211_4ADDR_LEN 30
+#define IEEE80211_FCS_LEN 4
+
+#define MIN_FRAG_THRESHOLD 256U
+#define MAX_FRAG_THRESHOLD 2346U
+
+/* Frame control field constants */
+#define RTW_IEEE80211_FCTL_VERS 0x0003
+#define RTW_IEEE80211_FCTL_FTYPE 0x000c
+#define RTW_IEEE80211_FCTL_STYPE 0x00f0
+#define RTW_IEEE80211_FCTL_TODS 0x0100
+#define RTW_IEEE80211_FCTL_FROMDS 0x0200
+#define RTW_IEEE80211_FCTL_MOREFRAGS 0x0400
+#define RTW_IEEE80211_FCTL_RETRY 0x0800
+#define RTW_IEEE80211_FCTL_PM 0x1000
+#define RTW_IEEE80211_FCTL_MOREDATA 0x2000
+#define RTW_IEEE80211_FCTL_PROTECTED 0x4000
+#define RTW_IEEE80211_FCTL_ORDER 0x8000
+#define RTW_IEEE80211_FCTL_CTL_EXT 0x0f00
+
+#define RTW_IEEE80211_FTYPE_MGMT 0x0000
+#define RTW_IEEE80211_FTYPE_CTL 0x0004
+#define RTW_IEEE80211_FTYPE_DATA 0x0008
+#define RTW_IEEE80211_FTYPE_EXT 0x000c
+
+/* management */
+#define RTW_IEEE80211_STYPE_ASSOC_REQ 0x0000
+#define RTW_IEEE80211_STYPE_ASSOC_RESP 0x0010
+#define RTW_IEEE80211_STYPE_REASSOC_REQ 0x0020
+#define RTW_IEEE80211_STYPE_REASSOC_RESP 0x0030
+#define RTW_IEEE80211_STYPE_PROBE_REQ 0x0040
+#define RTW_IEEE80211_STYPE_PROBE_RESP 0x0050
+#define RTW_IEEE80211_STYPE_BEACON 0x0080
+#define RTW_IEEE80211_STYPE_ATIM 0x0090
+#define RTW_IEEE80211_STYPE_DISASSOC 0x00A0
+#define RTW_IEEE80211_STYPE_AUTH 0x00B0
+#define RTW_IEEE80211_STYPE_DEAUTH 0x00C0
+#define RTW_IEEE80211_STYPE_ACTION 0x00D0
+
+/* control */
+#define RTW_IEEE80211_STYPE_CTL_EXT 0x0060
+#define RTW_IEEE80211_STYPE_BACK_REQ 0x0080
+#define RTW_IEEE80211_STYPE_BACK 0x0090
+#define RTW_IEEE80211_STYPE_PSPOLL 0x00A0
+#define RTW_IEEE80211_STYPE_RTS 0x00B0
+#define RTW_IEEE80211_STYPE_CTS 0x00C0
+#define RTW_IEEE80211_STYPE_ACK 0x00D0
+#define RTW_IEEE80211_STYPE_CFEND 0x00E0
+#define RTW_IEEE80211_STYPE_CFENDACK 0x00F0
+
+/* data */
+#define RTW_IEEE80211_STYPE_DATA 0x0000
+#define RTW_IEEE80211_STYPE_DATA_CFACK 0x0010
+#define RTW_IEEE80211_STYPE_DATA_CFPOLL 0x0020
+#define RTW_IEEE80211_STYPE_DATA_CFACKPOLL 0x0030
+#define RTW_IEEE80211_STYPE_NULLFUNC 0x0040
+#define RTW_IEEE80211_STYPE_CFACK 0x0050
+#define RTW_IEEE80211_STYPE_CFPOLL 0x0060
+#define RTW_IEEE80211_STYPE_CFACKPOLL 0x0070
+#define RTW_IEEE80211_STYPE_QOS_DATA 0x0080
+#define RTW_IEEE80211_STYPE_QOS_DATA_CFACK 0x0090
+#define RTW_IEEE80211_STYPE_QOS_DATA_CFPOLL 0x00A0
+#define RTW_IEEE80211_STYPE_QOS_DATA_CFACKPOLL 0x00B0
+#define RTW_IEEE80211_STYPE_QOS_NULLFUNC 0x00C0
+#define RTW_IEEE80211_STYPE_QOS_CFACK 0x00D0
+#define RTW_IEEE80211_STYPE_QOS_CFPOLL 0x00E0
+#define RTW_IEEE80211_STYPE_QOS_CFACKPOLL 0x00F0
+
+/* sequence control field */
+#define RTW_IEEE80211_SCTL_FRAG 0x000F
+#define RTW_IEEE80211_SCTL_SEQ 0xFFF0
+
+#define RTW_ERP_INFO_NON_ERP_PRESENT BIT(0)
+#define RTW_ERP_INFO_USE_PROTECTION BIT(1)
+#define RTW_ERP_INFO_BARKER_PREAMBLE_MODE BIT(2)
+
+/* QoS, QOS */
+#define NORMAL_ACK 0
+#define NO_ACK 1
+#define NON_EXPLICIT_ACK 2
+#define BLOCK_ACK 3
+
+#ifndef ETH_P_PAE
+#define ETH_P_PAE 0x888E /* Port Access Entity (IEEE 802.1X) */
+#endif /* ETH_P_PAE */
+
+#define ETH_P_PREAUTH 0x88C7 /* IEEE 802.11i pre-authentication */
+
+#define ETH_P_ECONET 0x0018
+
+#ifndef ETH_P_80211_RAW
+#define ETH_P_80211_RAW (ETH_P_ECONET + 1)
+#endif
+
+/* IEEE 802.11 defines */
+
+#define P80211_OUI_LEN 3
+
+struct ieee80211_snap_hdr {
+ u8 dsap; /* always 0xAA */
+ u8 ssap; /* always 0xAA */
+ u8 ctrl; /* always 0x03 */
+ u8 oui[P80211_OUI_LEN]; /* organizational universal id */
+} __packed;
+
+#define SNAP_SIZE sizeof(struct ieee80211_snap_hdr)
+
+#define WLAN_FC_GET_TYPE(fc) ((fc) & RTW_IEEE80211_FCTL_FTYPE)
+#define WLAN_FC_GET_STYPE(fc) ((fc) & RTW_IEEE80211_FCTL_STYPE)
+
+#define WLAN_QC_GET_TID(qc) ((qc) & 0x0f)
+
+#define WLAN_GET_SEQ_FRAG(seq) ((seq) & RTW_IEEE80211_SCTL_FRAG)
+#define WLAN_GET_SEQ_SEQ(seq) ((seq) & RTW_IEEE80211_SCTL_SEQ)
+
+/* Authentication algorithms */
+#define WLAN_AUTH_OPEN 0
+#define WLAN_AUTH_SHARED_KEY 1
+
+#define WLAN_AUTH_CHALLENGE_LEN 128
+
+#define WLAN_CAPABILITY_BSS (1<<0)
+#define WLAN_CAPABILITY_IBSS (1<<1)
+#define WLAN_CAPABILITY_CF_POLLABLE (1<<2)
+#define WLAN_CAPABILITY_CF_POLL_REQUEST (1<<3)
+#define WLAN_CAPABILITY_PRIVACY (1<<4)
+#define WLAN_CAPABILITY_SHORT_PREAMBLE (1<<5)
+#define WLAN_CAPABILITY_PBCC (1<<6)
+#define WLAN_CAPABILITY_CHANNEL_AGILITY (1<<7)
+#define WLAN_CAPABILITY_SHORT_SLOT (1<<10)
+
+/* Status codes */
+#define WLAN_STATUS_SUCCESS 0
+#define WLAN_STATUS_UNSPECIFIED_FAILURE 1
+#define WLAN_STATUS_CAPS_UNSUPPORTED 10
+#define WLAN_STATUS_REASSOC_NO_ASSOC 11
+#define WLAN_STATUS_ASSOC_DENIED_UNSPEC 12
+#define WLAN_STATUS_NOT_SUPPORTED_AUTH_ALG 13
+#define WLAN_STATUS_UNKNOWN_AUTH_TRANSACTION 14
+#define WLAN_STATUS_CHALLENGE_FAIL 15
+#define WLAN_STATUS_AUTH_TIMEOUT 16
+#define WLAN_STATUS_AP_UNABLE_TO_HANDLE_NEW_STA 17
+#define WLAN_STATUS_ASSOC_DENIED_RATES 18
+/* 802.11b */
+#define WLAN_STATUS_ASSOC_DENIED_NOSHORT 19
+#define WLAN_STATUS_ASSOC_DENIED_NOPBCC 20
+#define WLAN_STATUS_ASSOC_DENIED_NOAGILITY 21
+
+/* Reason codes */
+#define WLAN_REASON_UNSPECIFIED 1
+#define WLAN_REASON_PREV_AUTH_NOT_VALID 2
+#define WLAN_REASON_DEAUTH_LEAVING 3
+#define WLAN_REASON_DISASSOC_DUE_TO_INACTIVITY 4
+#define WLAN_REASON_DISASSOC_AP_BUSY 5
+#define WLAN_REASON_CLASS2_FRAME_FROM_NONAUTH_STA 6
+#define WLAN_REASON_CLASS3_FRAME_FROM_NONASSOC_STA 7
+#define WLAN_REASON_DISASSOC_STA_HAS_LEFT 8
+#define WLAN_REASON_STA_REQ_ASSOC_WITHOUT_AUTH 9
+#define WLAN_REASON_JOIN_WRONG_CHANNEL 65534
+#define WLAN_REASON_EXPIRATION_CHK 65535
+
+/* Information Element IDs */
+#define WLAN_EID_SSID 0
+#define WLAN_EID_SUPP_RATES 1
+#define WLAN_EID_FH_PARAMS 2
+#define WLAN_EID_DS_PARAMS 3
+#define WLAN_EID_CF_PARAMS 4
+#define WLAN_EID_TIM 5
+#define WLAN_EID_IBSS_PARAMS 6
+#define WLAN_EID_CHALLENGE 16
+/* EIDs defined by IEEE 802.11h - START */
+#define WLAN_EID_PWR_CONSTRAINT 32
+#define WLAN_EID_PWR_CAPABILITY 33
+#define WLAN_EID_TPC_REQUEST 34
+#define WLAN_EID_TPC_REPORT 35
+#define WLAN_EID_SUPPORTED_CHANNELS 36
+#define WLAN_EID_CHANNEL_SWITCH 37
+#define WLAN_EID_MEASURE_REQUEST 38
+#define WLAN_EID_MEASURE_REPORT 39
+#define WLAN_EID_QUITE 40
+#define WLAN_EID_IBSS_DFS 41
+/* EIDs defined by IEEE 802.11h - END */
+#define WLAN_EID_ERP_INFO 42
+#define WLAN_EID_HT_CAP 45
+#define WLAN_EID_RSN 48
+#define WLAN_EID_EXT_SUPP_RATES 50
+#define WLAN_EID_MOBILITY_DOMAIN 54
+#define WLAN_EID_FAST_BSS_TRANSITION 55
+#define WLAN_EID_TIMEOUT_INTERVAL 56
+#define WLAN_EID_RIC_DATA 57
+#define WLAN_EID_HT_OPERATION 61
+#define WLAN_EID_SECONDARY_CHANNEL_OFFSET 62
+#define WLAN_EID_20_40_BSS_COEXISTENCE 72
+#define WLAN_EID_20_40_BSS_INTOLERANT 73
+#define WLAN_EID_OVERLAPPING_BSS_SCAN_PARAMS 74
+#define WLAN_EID_MMIE 76
+#define WLAN_EID_VENDOR_SPECIFIC 221
+#define WLAN_EID_GENERIC (WLAN_EID_VENDOR_SPECIFIC)
+
+#define IEEE80211_MGMT_HDR_LEN 24
+#define IEEE80211_DATA_HDR3_LEN 24
+#define IEEE80211_DATA_HDR4_LEN 30
+
+#define IEEE80211_STATMASK_SIGNAL (1<<0)
+#define IEEE80211_STATMASK_RSSI (1<<1)
+#define IEEE80211_STATMASK_NOISE (1<<2)
+#define IEEE80211_STATMASK_RATE (1<<3)
+#define IEEE80211_STATMASK_WEMASK 0x7
+
+#define IEEE80211_CCK_MODULATION (1<<0)
+#define IEEE80211_OFDM_MODULATION (1<<1)
+
+#define IEEE80211_24GHZ_BAND (1<<0)
+#define IEEE80211_52GHZ_BAND (1<<1)
+
+#define IEEE80211_CCK_RATE_LEN 4
+#define IEEE80211_NUM_OFDM_RATESLEN 8
+
+#define IEEE80211_CCK_RATE_1MB 0x02
+#define IEEE80211_CCK_RATE_2MB 0x04
+#define IEEE80211_CCK_RATE_5MB 0x0B
+#define IEEE80211_CCK_RATE_11MB 0x16
+#define IEEE80211_OFDM_RATE_LEN 8
+#define IEEE80211_OFDM_RATE_6MB 0x0C
+#define IEEE80211_OFDM_RATE_9MB 0x12
+#define IEEE80211_OFDM_RATE_12MB 0x18
+#define IEEE80211_OFDM_RATE_18MB 0x24
+#define IEEE80211_OFDM_RATE_24MB 0x30
+#define IEEE80211_OFDM_RATE_36MB 0x48
+#define IEEE80211_OFDM_RATE_48MB 0x60
+#define IEEE80211_OFDM_RATE_54MB 0x6C
+#define IEEE80211_BASIC_RATE_MASK 0x80
+
+#define IEEE80211_CCK_RATE_1MB_MASK (1<<0)
+#define IEEE80211_CCK_RATE_2MB_MASK (1<<1)
+#define IEEE80211_CCK_RATE_5MB_MASK (1<<2)
+#define IEEE80211_CCK_RATE_11MB_MASK (1<<3)
+#define IEEE80211_OFDM_RATE_6MB_MASK (1<<4)
+#define IEEE80211_OFDM_RATE_9MB_MASK (1<<5)
+#define IEEE80211_OFDM_RATE_12MB_MASK (1<<6)
+#define IEEE80211_OFDM_RATE_18MB_MASK (1<<7)
+#define IEEE80211_OFDM_RATE_24MB_MASK (1<<8)
+#define IEEE80211_OFDM_RATE_36MB_MASK (1<<9)
+#define IEEE80211_OFDM_RATE_48MB_MASK (1<<10)
+#define IEEE80211_OFDM_RATE_54MB_MASK (1<<11)
+
+#define IEEE80211_CCK_RATES_MASK 0x0000000F
+#define IEEE80211_CCK_BASIC_RATES_MASK (IEEE80211_CCK_RATE_1MB_MASK | \
+ IEEE80211_CCK_RATE_2MB_MASK)
+#define IEEE80211_CCK_DEFAULT_RATES_MASK \
+ (IEEE80211_CCK_BASIC_RATES_MASK | \
+ IEEE80211_CCK_RATE_5MB_MASK | \
+ IEEE80211_CCK_RATE_11MB_MASK)
+
+#define IEEE80211_OFDM_RATES_MASK 0x00000FF0
+#define IEEE80211_OFDM_BASIC_RATES_MASK (IEEE80211_OFDM_RATE_6MB_MASK | \
+ IEEE80211_OFDM_RATE_12MB_MASK | \
+ IEEE80211_OFDM_RATE_24MB_MASK)
+#define IEEE80211_OFDM_DEFAULT_RATES_MASK \
+ (IEEE80211_OFDM_BASIC_RATES_MASK | \
+ IEEE80211_OFDM_RATE_9MB_MASK | \
+ IEEE80211_OFDM_RATE_18MB_MASK | \
+ IEEE80211_OFDM_RATE_36MB_MASK | \
+ IEEE80211_OFDM_RATE_48MB_MASK | \
+ IEEE80211_OFDM_RATE_54MB_MASK)
+#define IEEE80211_DEFAULT_RATES_MASK \
+ (IEEE80211_OFDM_DEFAULT_RATES_MASK | \
+ IEEE80211_CCK_DEFAULT_RATES_MASK)
+
+#define IEEE80211_NUM_OFDM_RATES 8
+#define IEEE80211_NUM_CCK_RATES 4
+#define IEEE80211_OFDM_SHIFT_MASK_A 4
+
+/* NOTE: This data is for statistical purposes; not all hardware provides this
+ * information for frames received. Not setting these will not cause
+ * any adverse affects. */
+struct ieee80211_rx_stats {
+ /* u32 mac_time[2]; */
+ s8 rssi;
+ u8 signal;
+ u8 noise;
+ u8 received_channel;
+ u16 rate; /* in 100 kbps */
+ /* u8 control; */
+ u8 mask;
+ u8 freq;
+ u16 len;
+};
+
+/* IEEE 802.11 requires that STA supports concurrent reception of at least
+ * three fragmented frames. This define can be increased to support more
+ * concurrent frames, but it should be noted that each entry can consume about
+ * 2 kB of RAM and increasing cache size will slow down frame reassembly. */
+#define IEEE80211_FRAG_CACHE_LEN 4
+
+struct ieee80211_frag_entry {
+ u32 first_frag_time;
+ uint seq;
+ uint last_frag;
+ uint qos; /* jackson */
+ uint tid; /* jackson */
+ struct sk_buff *skb;
+ u8 src_addr[ETH_ALEN];
+ u8 dst_addr[ETH_ALEN];
+};
+
+struct ieee80211_stats {
+ uint tx_unicast_frames;
+ uint tx_multicast_frames;
+ uint tx_fragments;
+ uint tx_unicast_octets;
+ uint tx_multicast_octets;
+ uint tx_deferred_transmissions;
+ uint tx_single_retry_frames;
+ uint tx_multiple_retry_frames;
+ uint tx_retry_limit_exceeded;
+ uint tx_discards;
+ uint rx_unicast_frames;
+ uint rx_multicast_frames;
+ uint rx_fragments;
+ uint rx_unicast_octets;
+ uint rx_multicast_octets;
+ uint rx_fcs_errors;
+ uint rx_discards_no_buffer;
+ uint tx_discards_wrong_sa;
+ uint rx_discards_undecryptable;
+ uint rx_message_in_msg_fragments;
+ uint rx_message_in_bad_msg_fragments;
+};
+
+struct ieee80211_softmac_stats {
+ uint rx_ass_ok;
+ uint rx_ass_err;
+ uint rx_probe_rq;
+ uint tx_probe_rs;
+ uint tx_beacons;
+ uint rx_auth_rq;
+ uint rx_auth_rs_ok;
+ uint rx_auth_rs_err;
+ uint tx_auth_rq;
+ uint no_auth_rs;
+ uint no_ass_rs;
+ uint tx_ass_rq;
+ uint rx_ass_rq;
+ uint tx_probe_rq;
+ uint reassoc;
+ uint swtxstop;
+ uint swtxawake;
+};
+
+#define SEC_KEY_1 (1<<0)
+#define SEC_KEY_2 (1<<1)
+#define SEC_KEY_3 (1<<2)
+#define SEC_KEY_4 (1<<3)
+#define SEC_ACTIVE_KEY (1<<4)
+#define SEC_AUTH_MODE (1<<5)
+#define SEC_UNICAST_GROUP (1<<6)
+#define SEC_LEVEL (1<<7)
+#define SEC_ENABLED (1<<8)
+
+#define SEC_LEVEL_0 0 /* None */
+#define SEC_LEVEL_1 1 /* WEP 40 and 104 bit */
+#define SEC_LEVEL_2 2 /* Level 1 + TKIP */
+#define SEC_LEVEL_2_CKIP 3 /* Level 1 + CKIP */
+#define SEC_LEVEL_3 4 /* Level 2 + CCMP */
+
+#define WEP_KEYS 4
+#define WEP_KEY_LEN 13
+
+struct ieee80211_security {
+ u16 active_key:2,
+ enabled:1,
+ auth_mode:2,
+ auth_algo:4,
+ unicast_uses_group:1;
+ u8 key_sizes[WEP_KEYS];
+ u8 keys[WEP_KEYS][WEP_KEY_LEN];
+ u8 level;
+ u16 flags;
+} __packed;
+
+/*
+
+ 802.11 data frame from AP
+
+ ,-------------------------------------------------------------------.
+Bytes | 2 | 2 | 6 | 6 | 6 | 2 | 0..2312 | 4 |
+ |------|------|---------|---------|---------|------|---------|------|
+Desc. | ctrl | dura | DA/RA | TA | SA | Sequ | frame | fcs |
+ | | tion | (BSSID) | | | ence | data | |
+ `-------------------------------------------------------------------'
+
+Total: 28-2340 bytes
+
+*/
+
+struct ieee80211_header_data {
+ u16 frame_ctl;
+ u16 duration_id;
+ u8 addr1[6];
+ u8 addr2[6];
+ u8 addr3[6];
+ u16 seq_ctrl;
+};
+
+#define BEACON_PROBE_SSID_ID_POSITION 12
+
+/* Management Frame Information Element Types */
+#define MFIE_TYPE_SSID 0
+#define MFIE_TYPE_RATES 1
+#define MFIE_TYPE_FH_SET 2
+#define MFIE_TYPE_DS_SET 3
+#define MFIE_TYPE_CF_SET 4
+#define MFIE_TYPE_TIM 5
+#define MFIE_TYPE_IBSS_SET 6
+#define MFIE_TYPE_CHALLENGE 16
+#define MFIE_TYPE_ERP 42
+#define MFIE_TYPE_RSN 48
+#define MFIE_TYPE_RATES_EX 50
+#define MFIE_TYPE_GENERIC 221
+
+struct ieee80211_info_element_hdr {
+ u8 id;
+ u8 len;
+} __packed;
+
+struct ieee80211_info_element {
+ u8 id;
+ u8 len;
+ u8 data[0];
+} __packed;
+
+/*
+ * These are the data types that can make up management packets
+ *
+ u16 auth_algorithm;
+ u16 auth_sequence;
+ u16 beacon_interval;
+ u16 capability;
+ u8 current_ap[ETH_ALEN];
+ u16 listen_interval;
+ struct {
+ u16 association_id:14, reserved:2;
+ } __packed;
+ u32 time_stamp[2];
+ u16 reason;
+ u16 status;
+*/
+
+#define IEEE80211_DEFAULT_TX_ESSID "Penguin"
+#define IEEE80211_DEFAULT_BASIC_RATE 10
+
+struct ieee80211_authentication {
+ struct ieee80211_header_data header;
+ u16 algorithm;
+ u16 transaction;
+ u16 status;
+ /* struct ieee80211_info_element_hdr info_element; */
+} __packed;
+
+struct ieee80211_probe_response {
+ struct ieee80211_header_data header;
+ u32 time_stamp[2];
+ u16 beacon_interval;
+ u16 capability;
+ struct ieee80211_info_element info_element;
+} __packed;
+
+struct ieee80211_probe_request {
+ struct ieee80211_header_data header;
+} __packed;
+
+struct ieee80211_assoc_request_frame {
+ struct rtw_ieee80211_hdr_3addr header;
+ u16 capability;
+ u16 listen_interval;
+ struct ieee80211_info_element_hdr info_element;
+} __packed;
+
+struct ieee80211_assoc_response_frame {
+ struct rtw_ieee80211_hdr_3addr header;
+ u16 capability;
+ u16 status;
+ u16 aid;
+} __packed;
+
+struct ieee80211_txb {
+ u8 nr_frags;
+ u8 encrypted;
+ u16 reserved;
+ u16 frag_size;
+ u16 payload_size;
+ struct sk_buff *fragments[0];
+};
+
+/* SWEEP TABLE ENTRIES NUMBER*/
+#define MAX_SWEEP_TAB_ENTRIES 42
+#define MAX_SWEEP_TAB_ENTRIES_PER_PACKET 7
+/* MAX_RATES_LENGTH needs to be 12. The spec says 8, and many APs
+ * only use 8, and then use extended rates for the remaining supported
+ * rates. Other APs, however, stick all of their supported rates on the
+ * main rates information element... */
+#define MAX_RATES_LENGTH ((u8)12)
+#define MAX_RATES_EX_LENGTH ((u8)16)
+#define MAX_NETWORK_COUNT 128
+#define MAX_CHANNEL_NUMBER 161
+#define IEEE80211_SOFTMAC_SCAN_TIME 400
+/* HZ / 2) */
+#define IEEE80211_SOFTMAC_ASSOC_RETRY_TIME (HZ * 2)
+
+#define CRC_LENGTH 4U
+
+#define MAX_WPA_IE_LEN (256)
+#define MAX_WPS_IE_LEN (512)
+#define MAX_P2P_IE_LEN (256)
+#define MAX_WFD_IE_LEN (128)
+
+#define NETWORK_EMPTY_ESSID (1<<0)
+#define NETWORK_HAS_OFDM (1<<1)
+#define NETWORK_HAS_CCK (1<<2)
+
+#define IEEE80211_DTIM_MBCAST 4
+#define IEEE80211_DTIM_UCAST 2
+#define IEEE80211_DTIM_VALID 1
+#define IEEE80211_DTIM_INVALID 0
+
+#define IEEE80211_PS_DISABLED 0
+#define IEEE80211_PS_UNICAST IEEE80211_DTIM_UCAST
+#define IEEE80211_PS_MBCAST IEEE80211_DTIM_MBCAST
+#define IW_ESSID_MAX_SIZE 32
+/*
+join_res:
+-1: authentication fail
+-2: association fail
+> 0: TID
+*/
+
+enum ieee80211_state {
+ /* the card is not linked at all */
+ IEEE80211_NOLINK = 0,
+
+ /* IEEE80211_ASSOCIATING* are for BSS client mode
+ * the driver shall not perform RX filtering unless
+ * the state is LINKED.
+ * The driver shall just check for the state LINKED and
+ * defaults to NOLINK for ALL the other states (including
+ * LINKED_SCANNING)
+ */
+
+ /* the association procedure will start (wq scheduling)*/
+ IEEE80211_ASSOCIATING,
+ IEEE80211_ASSOCIATING_RETRY,
+
+ /* the association procedure is sending AUTH request*/
+ IEEE80211_ASSOCIATING_AUTHENTICATING,
+
+ /* the association procedure has successfully authentcated
+ * and is sending association request
+ */
+ IEEE80211_ASSOCIATING_AUTHENTICATED,
+
+ /* the link is ok. the card associated to a BSS or linked
+ * to a ibss cell or acting as an AP and creating the bss
+ */
+ IEEE80211_LINKED,
+
+ /* same as LINKED, but the driver shall apply RX filter
+ * rules as we are in NO_LINK mode. As the card is still
+ * logically linked, but it is doing a syncro site survey
+ * then it will be back to LINKED state.
+ */
+ IEEE80211_LINKED_SCANNING,
+
+};
+
+#define DEFAULT_MAX_SCAN_AGE (15 * HZ)
+#define DEFAULT_FTS 2346
+
+static inline int is_multicast_mac_addr(const u8 *addr)
+{
+ return ((addr[0] != 0xff) && (0x01 & addr[0]));
+}
+
+static inline int is_broadcast_mac_addr(const u8 *addr)
+{
+ return (addr[0] == 0xff) && (addr[1] == 0xff) && (addr[2] == 0xff) &&
+ (addr[3] == 0xff) && (addr[4] == 0xff) && (addr[5] == 0xff);
+}
+
+#define CFG_IEEE80211_RESERVE_FCS (1<<0)
+#define CFG_IEEE80211_COMPUTE_FCS (1<<1)
+
+struct tx_pending {
+ int frag;
+ struct ieee80211_txb *txb;
+};
+
+#define MAXTID 16
+
+#define IEEE_A (1<<0)
+#define IEEE_B (1<<1)
+#define IEEE_G (1<<2)
+#define IEEE_MODE_MASK (IEEE_A|IEEE_B|IEEE_G)
+
+/* Baron move to ieee80211.c */
+int ieee80211_is_empty_essid(const char *essid, int essid_len);
+int ieee80211_get_hdrlen(u16 fc);
+
+/* Action category code */
+enum rtw_ieee80211_category {
+ RTW_WLAN_CATEGORY_SPECTRUM_MGMT = 0,
+ RTW_WLAN_CATEGORY_QOS = 1,
+ RTW_WLAN_CATEGORY_DLS = 2,
+ RTW_WLAN_CATEGORY_BACK = 3,
+ RTW_WLAN_CATEGORY_PUBLIC = 4, /* IEEE 802.11 public action frames */
+ RTW_WLAN_CATEGORY_RADIO_MEASUREMENT = 5,
+ RTW_WLAN_CATEGORY_FT = 6,
+ RTW_WLAN_CATEGORY_HT = 7,
+ RTW_WLAN_CATEGORY_SA_QUERY = 8,
+ RTW_WLAN_CATEGORY_TDLS = 12,
+ RTW_WLAN_CATEGORY_WMM = 17,
+ RTW_WLAN_CATEGORY_P2P = 0x7f,/* P2P action frames */
+};
+
+/* SPECTRUM_MGMT action code */
+enum rtw_ieee80211_spectrum_mgmt_actioncode {
+ RTW_WLAN_ACTION_SPCT_MSR_REQ = 0,
+ RTW_WLAN_ACTION_SPCT_MSR_RPRT = 1,
+ RTW_WLAN_ACTION_SPCT_TPC_REQ = 2,
+ RTW_WLAN_ACTION_SPCT_TPC_RPRT = 3,
+ RTW_WLAN_ACTION_SPCT_CHL_SWITCH = 4,
+ RTW_WLAN_ACTION_SPCT_EXT_CHL_SWITCH = 5,
+};
+
+enum _PUBLIC_ACTION {
+ ACT_PUBLIC_BSSCOEXIST = 0, /* 20/40 BSS Coexistence */
+ ACT_PUBLIC_DSE_ENABLE = 1,
+ ACT_PUBLIC_DSE_DEENABLE = 2,
+ ACT_PUBLIC_DSE_REG_LOCATION = 3,
+ ACT_PUBLIC_EXT_CHL_SWITCH = 4,
+ ACT_PUBLIC_DSE_MSR_REQ = 5,
+ ACT_PUBLIC_DSE_MSR_RPRT = 6,
+ ACT_PUBLIC_MP = 7, /* Measurement Pilot */
+ ACT_PUBLIC_DSE_PWR_CONSTRAINT = 8,
+ ACT_PUBLIC_VENDOR = 9, /* for WIFI_DIRECT */
+ ACT_PUBLIC_GAS_INITIAL_REQ = 10,
+ ACT_PUBLIC_GAS_INITIAL_RSP = 11,
+ ACT_PUBLIC_GAS_COMEBACK_REQ = 12,
+ ACT_PUBLIC_GAS_COMEBACK_RSP = 13,
+ ACT_PUBLIC_TDLS_DISCOVERY_RSP = 14,
+ ACT_PUBLIC_LOCATION_TRACK = 15,
+ ACT_PUBLIC_MAX
+};
+
+/* BACK action code */
+enum rtw_ieee80211_back_actioncode {
+ RTW_WLAN_ACTION_ADDBA_REQ = 0,
+ RTW_WLAN_ACTION_ADDBA_RESP = 1,
+ RTW_WLAN_ACTION_DELBA = 2,
+};
+
+/* HT features action code */
+enum rtw_ieee80211_ht_actioncode {
+ RTW_WLAN_ACTION_NOTIFY_CH_WIDTH = 0,
+ RTW_WLAN_ACTION_SM_PS = 1,
+ RTW_WLAN_ACTION_PSPM = 2,
+ RTW_WLAN_ACTION_PCO_PHASE = 3,
+ RTW_WLAN_ACTION_MIMO_CSI_MX = 4,
+ RTW_WLAN_ACTION_MIMO_NONCP_BF = 5,
+ RTW_WLAN_ACTION_MIMP_CP_BF = 6,
+ RTW_WLAN_ACTION_ASEL_INDICATES_FB = 7,
+ RTW_WLAN_ACTION_HI_INFO_EXCHG = 8,
+};
+
+/* BACK (block-ack) parties */
+enum rtw_ieee80211_back_parties {
+ RTW_WLAN_BACK_RECIPIENT = 0,
+ RTW_WLAN_BACK_INITIATOR = 1,
+ RTW_WLAN_BACK_TIMER = 2,
+};
+
+#define OUI_MICROSOFT 0x0050f2 /* Microsoft (also used in Wi-Fi specs)
+ * 00:50:F2 */
+#define WME_OUI_TYPE 2
+#define WME_OUI_SUBTYPE_INFORMATION_ELEMENT 0
+#define WME_OUI_SUBTYPE_PARAMETER_ELEMENT 1
+#define WME_OUI_SUBTYPE_TSPEC_ELEMENT 2
+#define WME_VERSION 1
+
+#define WME_ACTION_CODE_SETUP_REQUEST 0
+#define WME_ACTION_CODE_SETUP_RESPONSE 1
+#define WME_ACTION_CODE_TEARDOWN 2
+
+#define WME_SETUP_RESPONSE_STATUS_ADMISSION_ACCEPTED 0
+#define WME_SETUP_RESPONSE_STATUS_INVALID_PARAMETERS 1
+#define WME_SETUP_RESPONSE_STATUS_REFUSED 3
+
+#define WME_TSPEC_DIRECTION_UPLINK 0
+#define WME_TSPEC_DIRECTION_DOWNLINK 1
+#define WME_TSPEC_DIRECTION_BI_DIRECTIONAL 3
+
+#define OUI_BROADCOM 0x00904c /* Broadcom (Epigram) */
+
+#define VENDOR_HT_CAPAB_OUI_TYPE 0x33 /* 00-90-4c:0x33 */
+
+/**
+ * enum rtw_ieee80211_channel_flags - channel flags
+ *
+ * Channel flags set by the regulatory control code.
+ *
+ * @RTW_IEEE80211_CHAN_DISABLED: This channel is disabled.
+ * @RTW_IEEE80211_CHAN_PASSIVE_SCAN: Only passive scanning is permitted
+ * on this channel.
+ * @RTW_IEEE80211_CHAN_NO_IBSS: IBSS is not allowed on this channel.
+ * @RTW_IEEE80211_CHAN_RADAR: Radar detection is required on this channel.
+ * @RTW_IEEE80211_CHAN_NO_HT40PLUS: extension channel above this channel
+ * is not permitted.
+ * @RTW_IEEE80211_CHAN_NO_HT40MINUS: extension channel below this channel
+ * is not permitted.
+ */
+enum rtw_ieee80211_channel_flags {
+ RTW_IEEE80211_CHAN_DISABLED = 1<<0,
+ RTW_IEEE80211_CHAN_PASSIVE_SCAN = 1<<1,
+ RTW_IEEE80211_CHAN_NO_IBSS = 1<<2,
+ RTW_IEEE80211_CHAN_RADAR = 1<<3,
+ RTW_IEEE80211_CHAN_NO_HT40PLUS = 1<<4,
+ RTW_IEEE80211_CHAN_NO_HT40MINUS = 1<<5,
+};
+
+#define RTW_IEEE80211_CHAN_NO_HT40 \
+ (RTW_IEEE80211_CHAN_NO_HT40PLUS | RTW_IEEE80211_CHAN_NO_HT40MINUS)
+
+/* Represent channel details, subset of ieee80211_channel */
+struct rtw_ieee80211_channel {
+ u16 hw_value;
+ u32 flags;
+};
+
+#define CHAN_FMT \
+ "hw_value:%u, " \
+ "flags:0x%08x" \
+
+#define CHAN_ARG(channel) \
+ (channel)->hw_value \
+ , (channel)->flags \
+
+/* Parsed Information Elements */
+struct rtw_ieee802_11_elems {
+ u8 *ssid;
+ u8 ssid_len;
+ u8 *supp_rates;
+ u8 supp_rates_len;
+ u8 *fh_params;
+ u8 fh_params_len;
+ u8 *ds_params;
+ u8 ds_params_len;
+ u8 *cf_params;
+ u8 cf_params_len;
+ u8 *tim;
+ u8 tim_len;
+ u8 *ibss_params;
+ u8 ibss_params_len;
+ u8 *challenge;
+ u8 challenge_len;
+ u8 *erp_info;
+ u8 erp_info_len;
+ u8 *ext_supp_rates;
+ u8 ext_supp_rates_len;
+ u8 *wpa_ie;
+ u8 wpa_ie_len;
+ u8 *rsn_ie;
+ u8 rsn_ie_len;
+ u8 *wme;
+ u8 wme_len;
+ u8 *wme_tspec;
+ u8 wme_tspec_len;
+ u8 *wps_ie;
+ u8 wps_ie_len;
+ u8 *power_cap;
+ u8 power_cap_len;
+ u8 *supp_channels;
+ u8 supp_channels_len;
+ u8 *mdie;
+ u8 mdie_len;
+ u8 *ftie;
+ u8 ftie_len;
+ u8 *timeout_int;
+ u8 timeout_int_len;
+ u8 *ht_capabilities;
+ u8 ht_capabilities_len;
+ u8 *ht_operation;
+ u8 ht_operation_len;
+ u8 *vendor_ht_cap;
+ u8 vendor_ht_cap_len;
+};
+
+enum parse_res {
+ ParseOK = 0,
+ ParseUnknown = 1,
+ ParseFailed = -1
+};
+
+enum parse_res rtw_ieee802_11_parse_elems(u8 *start, uint len,
+ struct rtw_ieee802_11_elems *elems,
+ int show_errors);
+
+u8 *rtw_set_fixed_ie(unsigned char *pbuf, unsigned int len,
+ unsigned char *source, unsigned int *frlen);
+u8 *rtw_set_ie(u8 *pbuf, int index, uint len, u8 *source, uint *frlen);
+
+enum secondary_ch_offset {
+ SCN = 0, /* no secondary channel */
+ SCA = 1, /* secondary channel above */
+ SCB = 3, /* secondary channel below */
+};
+u8 secondary_ch_offset_to_hal_ch_offset(u8 ch_offset);
+u8 hal_ch_offset_to_secondary_ch_offset(u8 ch_offset);
+u8 *rtw_set_ie_ch_switch(u8 *buf, u32 *buf_len, u8 ch_switch_mode,
+ u8 new_ch, u8 ch_switch_cnt);
+u8 *rtw_set_ie_secondary_ch_offset(u8 *buf, u32 *buf_len,
+ u8 secondary_ch_offset);
+u8 *rtw_set_ie_mesh_ch_switch_parm(u8 *buf, u32 *buf_len, u8 ttl,
+ u8 flags, u16 reason, u16 precedence);
+
+u8 *rtw_get_ie(u8 *pbuf, int index, int *len, int limit);
+u8 *rtw_get_ie_ex(u8 *in_ie, uint in_len, u8 eid, u8 *oui,
+ u8 oui_len, u8 *ie, uint *ielen);
+int rtw_ies_remove_ie(u8 *ies, uint *ies_len, uint offset,
+ u8 eid, u8 *oui, u8 oui_len);
+
+void rtw_set_supported_rate(u8 *SupportedRates, uint mode);
+
+unsigned char *rtw_get_wpa_ie(unsigned char *pie, int *wpa_ie_len, int limit);
+unsigned char *rtw_get_wpa2_ie(unsigned char *pie, int *rsn_ie_len, int limit);
+int rtw_get_wpa_cipher_suite(u8 *s);
+int rtw_get_wpa2_cipher_suite(u8 *s);
+int rtw_get_wapi_ie(u8 *in_ie, uint in_len, u8 *wapi_ie, u16 *wapi_len);
+int rtw_parse_wpa_ie(u8 *wpa_ie, int wpa_ie_len, int *group_cipher,
+ int *pairwise_cipher, int *is_8021x);
+int rtw_parse_wpa2_ie(u8 *wpa_ie, int wpa_ie_len, int *group_cipher,
+ int *pairwise_cipher, int *is_8021x);
+
+int rtw_get_sec_ie(u8 *in_ie, uint in_len, u8 *rsn_ie, u16 *rsn_len,
+ u8 *wpa_ie, u16 *wpa_len);
+
+u8 rtw_is_wps_ie(u8 *ie_ptr, uint *wps_ielen);
+u8 *rtw_get_wps_ie(u8 *in_ie, uint in_len, u8 *wps_ie, uint *wps_ielen);
+u8 *rtw_get_wps_attr(u8 *wps_ie, uint wps_ielen, u16 target_attr_id,
+ u8 *buf_attr, u32 *len_attr);
+u8 *rtw_get_wps_attr_content(u8 *wps_ie, uint wps_ielen, u16 target_attr_id,
+ u8 *buf_content, uint *len_content);
+
+/**
+ * for_each_ie - iterate over continuous IEs
+ * @ie:
+ * @buf:
+ * @buf_len:
+ */
+#define for_each_ie(ie, buf, buf_len) \
+ for (ie = (void *)buf; (((u8 *)ie) - ((u8 *)buf) + 1) < buf_len; \
+ ie = (void *)(((u8 *)ie) + *(((u8 *)ie)+1) + 2))
+
+void dump_ies(u8 *buf, u32 buf_len);
+void dump_wps_ie(u8 *ie, u32 ie_len);
+
+#ifdef CONFIG_88EU_P2P
+void dump_p2p_ie(u8 *ie, u32 ie_len);
+u8 *rtw_get_p2p_ie(u8 *in_ie, int in_len, u8 *p2p_ie, uint *p2p_ielen);
+u8 *rtw_get_p2p_attr(u8 *p2p_ie, uint p2p_ielen, u8 target_attr_id,
+ u8 *buf_attr, u32 *len_attr);
+u8 *rtw_get_p2p_attr_content(u8 *p2p_ie, uint p2p_ielen, u8 target_attr_id,
+ u8 *buf_content, uint *len_content);
+u32 rtw_set_p2p_attr_content(u8 *pbuf, u8 attr_id, u16 attr_len,
+ u8 *pdata_attr);
+void rtw_wlan_bssid_ex_remove_p2p_attr(struct wlan_bssid_ex *bss_ex,
+ u8 attr_id);
+#endif
+
+uint rtw_get_rateset_len(u8 *rateset);
+
+struct registry_priv;
+int rtw_generate_ie(struct registry_priv *pregistrypriv);
+
+int rtw_get_bit_value_from_ieee_value(u8 val);
+
+uint rtw_is_cckrates_included(u8 *rate);
+
+uint rtw_is_cckratesonly_included(u8 *rate);
+
+int rtw_check_network_type(unsigned char *rate, int ratelen, int channel);
+
+void rtw_get_bcn_info(struct wlan_network *pnetwork);
+
+void rtw_macaddr_cfg(u8 *mac_addr);
+
+u16 rtw_mcs_rate(u8 rf_type, u8 bw_40MHz, u8 short_GI_20, u8 short_GI_40,
+ unsigned char *MCS_rate);
+
+int rtw_action_frame_parse(const u8 *frame, u32 frame_len, u8 *category,
+ u8 *action);
+const char *action_public_str(u8 action);
+
+#endif /* IEEE80211_H */
diff --git a/drivers/staging/r8188eu/include/ieee80211_ext.h b/drivers/staging/r8188eu/include/ieee80211_ext.h
new file mode 100644
index 000000000000..fa9e52572fe9
--- /dev/null
+++ b/drivers/staging/r8188eu/include/ieee80211_ext.h
@@ -0,0 +1,287 @@
+/******************************************************************************
+ *
+ * Copyright(c) 2007 - 2011 Realtek Corporation. All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of version 2 of the GNU General Public License as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
+ * more details.
+ *
+ * You should have received a copy of the GNU General Public License along with
+ * this program; if not, write to the Free Software Foundation, Inc.,
+ * 51 Franklin Street, Fifth Floor, Boston, MA 02110, USA
+ *
+ *
+ ******************************************************************************/
+#ifndef __IEEE80211_EXT_H
+#define __IEEE80211_EXT_H
+
+#include <osdep_service.h>
+#include <drv_types.h>
+
+#define WMM_OUI_TYPE 2
+#define WMM_OUI_SUBTYPE_INFORMATION_ELEMENT 0
+#define WMM_OUI_SUBTYPE_PARAMETER_ELEMENT 1
+#define WMM_OUI_SUBTYPE_TSPEC_ELEMENT 2
+#define WMM_VERSION 1
+
+#define WPA_PROTO_WPA BIT(0)
+#define WPA_PROTO_RSN BIT(1)
+
+#define WPA_KEY_MGMT_IEEE8021X BIT(0)
+#define WPA_KEY_MGMT_PSK BIT(1)
+#define WPA_KEY_MGMT_NONE BIT(2)
+#define WPA_KEY_MGMT_IEEE8021X_NO_WPA BIT(3)
+#define WPA_KEY_MGMT_WPA_NONE BIT(4)
+
+#define WPA_CAPABILITY_PREAUTH BIT(0)
+#define WPA_CAPABILITY_MGMT_FRAME_PROTECTION BIT(6)
+#define WPA_CAPABILITY_PEERKEY_ENABLED BIT(9)
+
+#define PMKID_LEN 16
+
+struct wpa_ie_hdr {
+ u8 elem_id;
+ u8 len;
+ u8 oui[4]; /* 24-bit OUI followed by 8-bit OUI type */
+ u8 version[2]; /* little endian */
+} __packed;
+
+struct rsn_ie_hdr {
+ u8 elem_id; /* WLAN_EID_RSN */
+ u8 len;
+ u8 version[2]; /* little endian */
+} __packed;
+
+struct wme_ac_parameter {
+#if defined(__LITTLE_ENDIAN)
+ /* byte 1 */
+ u8 aifsn:4,
+ acm:1,
+ aci:2,
+ reserved:1;
+
+ /* byte 2 */
+ u8 eCWmin:4,
+ eCWmax:4;
+#elif defined(__BIG_ENDIAN)
+ /* byte 1 */
+ u8 reserved:1,
+ aci:2,
+ acm:1,
+ aifsn:4;
+
+ /* byte 2 */
+ u8 eCWmax:4,
+ eCWmin:4;
+#else
+#error "Please fix <endian.h>"
+#endif
+
+ /* bytes 3 & 4 */
+ u16 txopLimit;
+} __packed;
+
+struct wme_parameter_element {
+ /* required fields for WME version 1 */
+ u8 oui[3];
+ u8 oui_type;
+ u8 oui_subtype;
+ u8 version;
+ u8 acInfo;
+ u8 reserved;
+ struct wme_ac_parameter ac[4];
+
+} __packed;
+
+#define WPA_PUT_LE16(a, val) \
+ do { \
+ (a)[1] = ((u16) (val)) >> 8; \
+ (a)[0] = ((u16) (val)) & 0xff; \
+ } while (0)
+
+#define WPA_PUT_BE32(a, val) \
+ do { \
+ (a)[0] = (u8) ((((u32) (val)) >> 24) & 0xff); \
+ (a)[1] = (u8) ((((u32) (val)) >> 16) & 0xff); \
+ (a)[2] = (u8) ((((u32) (val)) >> 8) & 0xff); \
+ (a)[3] = (u8) (((u32) (val)) & 0xff); \
+ } while (0)
+
+#define WPA_PUT_LE32(a, val) \
+ do { \
+ (a)[3] = (u8) ((((u32) (val)) >> 24) & 0xff); \
+ (a)[2] = (u8) ((((u32) (val)) >> 16) & 0xff); \
+ (a)[1] = (u8) ((((u32) (val)) >> 8) & 0xff); \
+ (a)[0] = (u8) (((u32) (val)) & 0xff); \
+ } while (0)
+
+#define RSN_SELECTOR_PUT(a, val) WPA_PUT_BE32((u8 *)(a), (val))
+
+/* Action category code */
+enum ieee80211_category {
+ WLAN_CATEGORY_SPECTRUM_MGMT = 0,
+ WLAN_CATEGORY_QOS = 1,
+ WLAN_CATEGORY_DLS = 2,
+ WLAN_CATEGORY_BACK = 3,
+ WLAN_CATEGORY_HT = 7,
+ WLAN_CATEGORY_WMM = 17,
+};
+
+/* SPECTRUM_MGMT action code */
+enum ieee80211_spectrum_mgmt_actioncode {
+ WLAN_ACTION_SPCT_MSR_REQ = 0,
+ WLAN_ACTION_SPCT_MSR_RPRT = 1,
+ WLAN_ACTION_SPCT_TPC_REQ = 2,
+ WLAN_ACTION_SPCT_TPC_RPRT = 3,
+ WLAN_ACTION_SPCT_CHL_SWITCH = 4,
+ WLAN_ACTION_SPCT_EXT_CHL_SWITCH = 5,
+};
+
+/* BACK action code */
+enum ieee80211_back_actioncode {
+ WLAN_ACTION_ADDBA_REQ = 0,
+ WLAN_ACTION_ADDBA_RESP = 1,
+ WLAN_ACTION_DELBA = 2,
+};
+
+/* HT features action code */
+enum ieee80211_ht_actioncode {
+ WLAN_ACTION_NOTIFY_CH_WIDTH = 0,
+ WLAN_ACTION_SM_PS = 1,
+ WLAN_ACTION_PSPM = 2,
+ WLAN_ACTION_PCO_PHASE = 3,
+ WLAN_ACTION_MIMO_CSI_MX = 4,
+ WLAN_ACTION_MIMO_NONCP_BF = 5,
+ WLAN_ACTION_MIMP_CP_BF = 6,
+ WLAN_ACTION_ASEL_INDICATES_FB = 7,
+ WLAN_ACTION_HI_INFO_EXCHG = 8,
+};
+
+/* BACK (block-ack) parties */
+enum ieee80211_back_parties {
+ WLAN_BACK_RECIPIENT = 0,
+ WLAN_BACK_INITIATOR = 1,
+ WLAN_BACK_TIMER = 2,
+};
+
+struct ieee80211_mgmt {
+ u16 frame_control;
+ u16 duration;
+ u8 da[6];
+ u8 sa[6];
+ u8 bssid[6];
+ u16 seq_ctrl;
+ union {
+ struct {
+ u16 auth_alg;
+ u16 auth_transaction;
+ u16 status_code;
+ /* possibly followed by Challenge text */
+ u8 variable[0];
+ } __packed auth;
+ struct {
+ u16 reason_code;
+ } __packed deauth;
+ struct {
+ u16 capab_info;
+ u16 listen_interval;
+ /* followed by SSID and Supported rates */
+ u8 variable[0];
+ } __packed assoc_req;
+ struct {
+ u16 capab_info;
+ u16 status_code;
+ u16 aid;
+ /* followed by Supported rates */
+ u8 variable[0];
+ } __packed assoc_resp, reassoc_resp;
+ struct {
+ u16 capab_info;
+ u16 listen_interval;
+ u8 current_ap[6];
+ /* followed by SSID and Supported rates */
+ u8 variable[0];
+ } __packed reassoc_req;
+ struct {
+ u16 reason_code;
+ } __packed disassoc;
+ struct {
+ __le64 timestamp;
+ u16 beacon_int;
+ u16 capab_info;
+ /* followed by some of SSID, Supported rates,
+ * FH Params, DS Params, CF Params, IBSS Params, TIM */
+ u8 variable[0];
+ } __packed beacon;
+ struct {
+ /* only variable items: SSID, Supported rates */
+ u8 variable[0];
+ } __packed probe_req;
+ struct {
+ __le64 timestamp;
+ u16 beacon_int;
+ u16 capab_info;
+ /* followed by some of SSID, Supported rates,
+ * FH Params, DS Params, CF Params, IBSS Params */
+ u8 variable[0];
+ } __packed probe_resp;
+ struct {
+ u8 category;
+ union {
+ struct {
+ u8 action_code;
+ u8 dialog_token;
+ u8 status_code;
+ u8 variable[0];
+ } __packed wme_action;
+ struct {
+ u8 action_code;
+ u8 dialog_token;
+ u16 capab;
+ u16 timeout;
+ u16 start_seq_num;
+ } __packed addba_req;
+ struct {
+ u8 action_code;
+ u8 dialog_token;
+ u16 status;
+ u16 capab;
+ u16 timeout;
+ } __packed addba_resp;
+ struct {
+ u8 action_code;
+ u16 params;
+ u16 reason_code;
+ } __packed delba;
+ structi {
+ u8 action_code;
+ /* capab_info for open and confirm,
+ * reason for close
+ */
+ u16 aux;
+ /* Followed in plink_confirm by status
+ * code, AID and supported rates,
+ * and directly by supported rates in
+ * plink_open and plink_close
+ */
+ u8 variable[0];
+ } __packed plink_action;
+ struct{
+ u8 action_code;
+ u8 variable[0];
+ } __packed mesh_action;
+ } __packed u;
+ } __packed action;
+ } __packed u;
+} __packed;
+
+/* mgmt header + 1 byte category code */
+#define IEEE80211_MIN_ACTION_SIZE \
+ FIELD_OFFSET(struct ieee80211_mgmt, u.action.u)
+
+#endif
diff --git a/drivers/staging/r8188eu/include/if_ether.h b/drivers/staging/r8188eu/include/if_ether.h
new file mode 100644
index 000000000000..db157712a203
--- /dev/null
+++ b/drivers/staging/r8188eu/include/if_ether.h
@@ -0,0 +1,111 @@
+/******************************************************************************
+ *
+ * Copyright(c) 2007 - 2011 Realtek Corporation. All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of version 2 of the GNU General Public License as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
+ * more details.
+ *
+ * You should have received a copy of the GNU General Public License along with
+ * this program; if not, write to the Free Software Foundation, Inc.,
+ * 51 Franklin Street, Fifth Floor, Boston, MA 02110, USA
+ *
+ *
+ ******************************************************************************/
+
+#ifndef _LINUX_IF_ETHER_H
+#define _LINUX_IF_ETHER_H
+
+/*
+ * IEEE 802.3 Ethernet magic constants. The frame sizes omit the preamble
+ * and FCS/CRC (frame check sequence).
+ */
+
+#define ETH_ALEN 6 /* Octets in one ethernet addr */
+#define ETH_HLEN 14 /* Total octets in header. */
+#define ETH_ZLEN 60 /* Min. octets in frame sans FCS */
+#define ETH_DATA_LEN 1500 /* Max. octets in payload */
+#define ETH_FRAME_LEN 1514 /* Max. octets in frame sans FCS */
+
+/*
+ * These are the defined Ethernet Protocol ID's.
+ */
+
+#define ETH_P_LOOP 0x0060 /* Ethernet Loopback packet */
+#define ETH_P_PUP 0x0200 /* Xerox PUP packet */
+#define ETH_P_PUPAT 0x0201 /* Xerox PUP Addr Trans packet */
+#define ETH_P_IP 0x0800 /* Internet Protocol packet */
+#define ETH_P_X25 0x0805 /* CCITT X.25 */
+#define ETH_P_ARP 0x0806 /* Address Resolution packet */
+#define ETH_P_BPQ 0x08FF /* G8BPQ AX.25 Ethernet Packet */
+#define ETH_P_IEEEPUP 0x0a00 /* Xerox IEEE802.3 PUP packet */
+#define ETH_P_IEEEPUPAT 0x0a01 /* Xerox IEEE802.3 PUP */
+#define ETH_P_DEC 0x6000 /* DEC Assigned proto */
+#define ETH_P_DNA_DL 0x6001 /* DEC DNA Dump/Load */
+#define ETH_P_DNA_RC 0x6002 /* DEC DNA Remote Console */
+#define ETH_P_DNA_RT 0x6003 /* DEC DNA Routing */
+#define ETH_P_LAT 0x6004 /* DEC LAT */
+#define ETH_P_DIAG 0x6005 /* DEC Diagnostics */
+#define ETH_P_CUST 0x6006 /* DEC Customer use */
+#define ETH_P_SCA 0x6007 /* DEC Systems Comms Arch */
+#define ETH_P_RARP 0x8035 /* Reverse Addr Res packet */
+#define ETH_P_ATALK 0x809B /* Appletalk DDP */
+#define ETH_P_AARP 0x80F3 /* Appletalk AARP */
+#define ETH_P_8021Q 0x8100 /* 802.1Q VLAN Extended Header */
+#define ETH_P_IPX 0x8137 /* IPX over DIX */
+#define ETH_P_IPV6 0x86DD /* IPv6 over bluebook */
+#define ETH_P_PPP_DISC 0x8863 /* PPPoE discovery messages */
+#define ETH_P_PPP_SES 0x8864 /* PPPoE session messages */
+#define ETH_P_ATMMPOA 0x884c /* MultiProtocol Over ATM */
+#define ETH_P_ATMFATE 0x8884 /* Frame-based ATM Transport
+ * over Ethernet
+ */
+
+/*
+ * Non DIX types. Won't clash for 1500 types.
+ */
+
+#define ETH_P_802_3 0x0001 /* Dummy type for 802.3 frames */
+#define ETH_P_AX25 0x0002 /* Dummy protocol id for AX.25 */
+#define ETH_P_ALL 0x0003 /* Every packet (be careful!!!) */
+#define ETH_P_802_2 0x0004 /* 802.2 frames */
+#define ETH_P_SNAP 0x0005 /* Internal only */
+#define ETH_P_DDCMP 0x0006 /* DEC DDCMP: Internal only */
+#define ETH_P_WAN_PPP 0x0007 /* Dummy type for WAN PPP frames*/
+#define ETH_P_PPP_MP 0x0008 /* Dummy type for PPP MP frames */
+#define ETH_P_LOCALTALK 0x0009 /* Localtalk pseudo type */
+#define ETH_P_PPPTALK 0x0010 /* Dummy type for Atalk over PPP*/
+#define ETH_P_TR_802_2 0x0011 /* 802.2 frames */
+#define ETH_P_MOBITEX 0x0015 /* Mobitex (kaz@...e.net) */
+#define ETH_P_CONTROL 0x0016 /* Card specific control frames */
+#define ETH_P_IRDA 0x0017 /* Linux-IrDA */
+#define ETH_P_ECONET 0x0018 /* Acorn Econet */
+
+/*
+ * This is an Ethernet frame header.
+ */
+
+struct ethhdr {
+ unsigned char h_dest[ETH_ALEN]; /* destination eth addr */
+ unsigned char h_source[ETH_ALEN]; /* source ether addr */
+ unsigned short h_proto; /* packet type ID field */
+};
+
+struct _vlan {
+ unsigned short h_vlan_TCI; /* Encap prio and VLAN ID */
+ unsigned short h_vlan_encapsulated_proto;
+};
+
+#define get_vlan_id(pvlan) \
+ ((ntohs((unsigned short)pvlan->h_vlan_TCI)) & 0xfff)
+#define get_vlan_priority(pvlan) \
+ ((ntohs((unsigned short)pvlan->h_vlan_TCI))>>13)
+#define get_vlan_encap_proto(pvlan) \
+ (ntohs((unsigned short)pvlan->h_vlan_encapsulated_proto))
+
+#endif /* _LINUX_IF_ETHER_H */
diff --git a/drivers/staging/r8188eu/include/ioctl_cfg80211.h b/drivers/staging/r8188eu/include/ioctl_cfg80211.h
new file mode 100644
index 000000000000..037e9a5e5af9
--- /dev/null
+++ b/drivers/staging/r8188eu/include/ioctl_cfg80211.h
@@ -0,0 +1,107 @@
+/******************************************************************************
+ *
+ * Copyright(c) 2007 - 2011 Realtek Corporation. All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of version 2 of the GNU General Public License as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
+ * more details.
+ *
+ * You should have received a copy of the GNU General Public License along with
+ * this program; if not, write to the Free Software Foundation, Inc.,
+ * 51 Franklin Street, Fifth Floor, Boston, MA 02110, USA
+ *
+ *
+ ******************************************************************************/
+#ifndef __IOCTL_CFG80211_H__
+#define __IOCTL_CFG80211_H__
+
+struct rtw_wdev_invit_info {
+ u8 token;
+ u8 flags;
+ u8 status;
+ u8 req_op_ch;
+ u8 rsp_op_ch;
+};
+
+#define rtw_wdev_invit_info_init(invit_info) \
+ do { \
+ (invit_info)->token = 0; \
+ (invit_info)->flags = 0x00; \
+ (invit_info)->status = 0xff; \
+ (invit_info)->req_op_ch = 0; \
+ (invit_info)->rsp_op_ch = 0; \
+ } while (0)
+
+struct rtw_wdev_priv {
+ struct wireless_dev *rtw_wdev;
+
+ struct adapter *padapter;
+
+ struct cfg80211_scan_request *scan_request;
+ spinlock_t scan_req_lock;
+
+ struct net_device *pmon_ndev;/* for monitor interface */
+ char ifname_mon[IFNAMSIZ + 1]; /* name of monitor interface */
+
+ u8 p2p_enabled;
+
+ u8 provdisc_req_issued;
+
+ struct rtw_wdev_invit_info invit_info;
+
+ u8 bandroid_scan;
+ bool block;
+ bool power_mgmt;
+};
+
+#define wdev_to_priv(w) ((struct rtw_wdev_priv *)(wdev_priv(w)))
+
+#define wiphy_to_wdev(x) \
+((struct wireless_dev *)(((struct rtw_wdev_priv *)wiphy_priv(x))->rtw_wdev))
+
+int rtw_wdev_alloc(struct adapter *padapter, struct device *dev);
+void rtw_wdev_free(struct wireless_dev *wdev);
+void rtw_wdev_unregister(struct wireless_dev *wdev);
+
+void rtw_cfg80211_init_wiphy(struct adapter *padapter);
+
+void rtw_cfg80211_surveydone_event_callback(struct adapter *padapter);
+
+void rtw_cfg80211_indicate_connect(struct adapter *padapter);
+void rtw_cfg80211_indicate_disconnect(struct adapter *padapter);
+void rtw_cfg80211_indicate_scan_done(struct rtw_wdev_priv *pwdev_priv,
+ bool aborted);
+
+#ifdef CONFIG_88EU_AP_MODE
+void rtw_cfg80211_indicate_sta_assoc(struct adapter *padapter,
+ u8 *pmgmt_frame, uint frame_len);
+void rtw_cfg80211_indicate_sta_disassoc(struct adapter *padapter,
+ unsigned char *da,
+ unsigned short reason);
+#endif /* CONFIG_88EU_AP_MODE */
+
+void rtw_cfg80211_issue_p2p_provision_request(struct adapter *padapter,
+ const u8 *buf, size_t len);
+void rtw_cfg80211_rx_p2p_action_public(struct adapter *padapter,
+ u8 *pmgmt_frame, uint frame_len);
+void rtw_cfg80211_rx_action_p2p(struct adapter *padapter, u8 *pmgmt_frame,
+ uint frame_len);
+void rtw_cfg80211_rx_action(struct adapter *adapter, u8 *frame,
+ uint frame_len, const char *msg);
+
+int rtw_cfg80211_set_mgnt_wpsp2pie(struct net_device *net,
+ char *buf, int len, int type);
+
+bool rtw_cfg80211_pwr_mgmt(struct adapter *adapter);
+
+#define rtw_cfg80211_rx_mgmt(dev, freq, sig_dbm, buf, len, gfp) \
+ cfg80211_rx_mgmt(dev, freq, sig_dbm, buf, len, gfp)
+#define rtw_cfg80211_send_rx_assoc(dev, bss, buf, len) \
+ cfg80211_send_rx_assoc(dev, bss, buf, len)
+
+#endif /* __IOCTL_CFG80211_H__ */
diff --git a/drivers/staging/r8188eu/include/ip.h b/drivers/staging/r8188eu/include/ip.h
new file mode 100644
index 000000000000..0107ac15c6ed
--- /dev/null
+++ b/drivers/staging/r8188eu/include/ip.h
@@ -0,0 +1,125 @@
+/******************************************************************************
+ *
+ * Copyright(c) 2007 - 2011 Realtek Corporation. All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of version 2 of the GNU General Public License as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
+ * more details.
+ *
+ * You should have received a copy of the GNU General Public License along with
+ * this program; if not, write to the Free Software Foundation, Inc.,
+ * 51 Franklin Street, Fifth Floor, Boston, MA 02110, USA
+ *
+ *
+ ******************************************************************************/
+#ifndef _LINUX_IP_H
+#define _LINUX_IP_H
+
+/* SOL_IP socket options */
+
+#define IPTOS_TOS_MASK 0x1E
+#define IPTOS_TOS(tos) ((tos)&IPTOS_TOS_MASK)
+#define IPTOS_LOWDELAY 0x10
+#define IPTOS_THROUGHPUT 0x08
+#define IPTOS_RELIABILITY 0x04
+#define IPTOS_MINCOST 0x02
+
+#define IPTOS_PREC_MASK 0xE0
+#define IPTOS_PREC(tos) ((tos)&IPTOS_PREC_MASK)
+#define IPTOS_PREC_NETCONTROL 0xe0
+#define IPTOS_PREC_INTERNETCONTROL 0xc0
+#define IPTOS_PREC_CRITIC_ECP 0xa0
+#define IPTOS_PREC_FLASHOVERRIDE 0x80
+#define IPTOS_PREC_FLASH 0x60
+#define IPTOS_PREC_IMMEDIATE 0x40
+#define IPTOS_PREC_PRIORITY 0x20
+#define IPTOS_PREC_ROUTINE 0x00
+
+/* IP options */
+#define IPOPT_COPY 0x80
+#define IPOPT_CLASS_MASK 0x60
+#define IPOPT_NUMBER_MASK 0x1f
+
+#define IPOPT_COPIED(o) ((o)&IPOPT_COPY)
+#define IPOPT_CLASS(o) ((o)&IPOPT_CLASS_MASK)
+#define IPOPT_NUMBER(o) ((o)&IPOPT_NUMBER_MASK)
+
+#define IPOPT_CONTROL 0x00
+#define IPOPT_RESERVED1 0x20
+#define IPOPT_MEASUREMENT 0x40
+#define IPOPT_RESERVED2 0x60
+
+#define IPOPT_END (0 | IPOPT_CONTROL)
+#define IPOPT_NOOP (1 | IPOPT_CONTROL)
+#define IPOPT_SEC (2 | IPOPT_CONTROL | IPOPT_COPY)
+#define IPOPT_LSRR (3 | IPOPT_CONTROL | IPOPT_COPY)
+#define IPOPT_TIMESTAMP (4 | IPOPT_MEASUREMENT)
+#define IPOPT_RR (7 | IPOPT_CONTROL)
+#define IPOPT_SID (8 | IPOPT_CONTROL | IPOPT_COPY)
+#define IPOPT_SSRR (9 | IPOPT_CONTROL | IPOPT_COPY)
+#define IPOPT_RA (20 | IPOPT_CONTROL | IPOPT_COPY)
+
+#define IPVERSION 4
+#define MAXTTL 255
+#define IPDEFTTL 64
+#define IPOPT_OPTVAL 0
+#define IPOPT_OLEN 1
+#define IPOPT_OFFSET 2
+#define IPOPT_MINOFF 4
+#define MAX_IPOPTLEN 40
+#define IPOPT_NOP IPOPT_NOOP
+#define IPOPT_EOL IPOPT_END
+#define IPOPT_TS IPOPT_TIMESTAMP
+
+#define IPOPT_TS_TSONLY 0 /* timestamps only */
+#define IPOPT_TS_TSANDADDR 1 /* timestamps and addresses */
+#define IPOPT_TS_PRESPEC 3 /* specified modules only */
+
+struct ip_options {
+ __u32 faddr; /* Saved first hop address */
+ unsigned char optlen;
+ unsigned char srr;
+ unsigned char rr;
+ unsigned char ts;
+ unsigned char is_setbyuser:1, /* Set by setsockopt? */
+ is_data:1, /* Options in __data, rather than skb*/
+ is_strictroute:1,/* Strict source route */
+ srr_is_hit:1, /* Packet destn addr was ours */
+ is_changed:1, /* IP checksum more not valid */
+ rr_needaddr:1, /* Need to record addr of out dev*/
+ ts_needtime:1, /* Need to record timestamp */
+ ts_needaddr:1; /* Need to record addr of out dev */
+ unsigned char router_alert;
+ unsigned char __pad1;
+ unsigned char __pad2;
+ unsigned char __data[0];
+};
+
+#define optlength(opt) (sizeof(struct ip_options) + opt->optlen)
+
+struct iphdr {
+#if defined(__LITTLE_ENDIAN_BITFIELD)
+ __u8 ihl:4,
+ version:4;
+#elif defined(__BIG_ENDIAN_BITFIELD)
+ __u8 version:4,
+ ihl:4;
+#endif
+ __u8 tos;
+ __u16 tot_len;
+ __u16 id;
+ __u16 frag_off;
+ __u8 ttl;
+ __u8 protocol;
+ __u16 check;
+ __u32 saddr;
+ __u32 daddr;
+ /*The options start here. */
+};
+
+#endif /* _LINUX_IP_H */
diff --git a/drivers/staging/r8188eu/include/mlme_osdep.h b/drivers/staging/r8188eu/include/mlme_osdep.h
new file mode 100644
index 000000000000..ae1722c67032
--- /dev/null
+++ b/drivers/staging/r8188eu/include/mlme_osdep.h
@@ -0,0 +1,35 @@
+/******************************************************************************
+ *
+ * Copyright(c) 2007 - 2011 Realtek Corporation. All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of version 2 of the GNU General Public License as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
+ * more details.
+ *
+ * You should have received a copy of the GNU General Public License along with
+ * this program; if not, write to the Free Software Foundation, Inc.,
+ * 51 Franklin Street, Fifth Floor, Boston, MA 02110, USA
+ *
+ *
+ ******************************************************************************/
+#ifndef __MLME_OSDEP_H_
+#define __MLME_OSDEP_H_
+
+#include <osdep_service.h>
+#include <drv_types.h>
+
+void rtw_init_mlme_timer(struct adapter *padapter);
+void rtw_os_indicate_disconnect(struct adapter *adapter);
+void rtw_os_indicate_connect(struct adapter *adapter);
+void rtw_os_indicate_scan_done(struct adapter *padapter, bool aborted);
+void rtw_report_sec_ie(struct adapter *adapter, u8 authmode, u8 *sec_ie);
+
+void rtw_reset_securitypriv(struct adapter *adapter);
+void indicate_wx_scan_complete_event(struct adapter *padapter);
+
+#endif /* _MLME_OSDEP_H_ */
diff --git a/drivers/staging/r8188eu/include/mp_custom_oid.h b/drivers/staging/r8188eu/include/mp_custom_oid.h
new file mode 100644
index 000000000000..be4f11864f63
--- /dev/null
+++ b/drivers/staging/r8188eu/include/mp_custom_oid.h
@@ -0,0 +1,349 @@
+/******************************************************************************
+ *
+ * Copyright(c) 2007 - 2011 Realtek Corporation. All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of version 2 of the GNU General Public License as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
+ * more details.
+ *
+ * You should have received a copy of the GNU General Public License along with
+ * this program; if not, write to the Free Software Foundation, Inc.,
+ * 51 Franklin Street, Fifth Floor, Boston, MA 02110, USA
+ *
+ *
+ ******************************************************************************/
+#ifndef __CUSTOM_OID_H
+#define __CUSTOM_OID_H
+
+/* by Owen */
+/* 0xFF818000 - 0xFF81802F RTL8180 Mass Production Kit */
+/* 0xFF818500 - 0xFF81850F RTL8185 Setup Utility */
+/* 0xFF818580 - 0xFF81858F RTL8185 Phy Status Utility */
+
+/* */
+
+/* by Owen for Production Kit */
+/* For Production Kit with Agilent Equipments */
+/* in order to make our custom oids hopefully somewhat unique */
+/* we will use 0xFF (indicating implementation specific OID) */
+/* 81(first byte of non zero Realtek unique identifier) */
+/* 80 (second byte of non zero Realtek unique identifier) */
+/* XX (the custom OID number - providing 255 possible custom oids) */
+
+#define OID_RT_PRO_RESET_DUT 0xFF818000
+#define OID_RT_PRO_SET_DATA_RATE 0xFF818001
+#define OID_RT_PRO_START_TEST 0xFF818002
+#define OID_RT_PRO_STOP_TEST 0xFF818003
+#define OID_RT_PRO_SET_PREAMBLE 0xFF818004
+#define OID_RT_PRO_SET_SCRAMBLER 0xFF818005
+#define OID_RT_PRO_SET_FILTER_BB 0xFF818006
+#define OID_RT_PRO_SET_MANUAL_DIVERSITY_BB 0xFF818007
+#define OID_RT_PRO_SET_CHANNEL_DIRECT_CALL 0xFF818008
+#define OID_RT_PRO_SET_SLEEP_MODE_DIRECT_CALL 0xFF818009
+#define OID_RT_PRO_SET_WAKE_MODE_DIRECT_CALL 0xFF81800A
+
+#define OID_RT_PRO_SET_TX_ANTENNA_BB 0xFF81800D
+#define OID_RT_PRO_SET_ANTENNA_BB 0xFF81800E
+#define OID_RT_PRO_SET_CR_SCRAMBLER 0xFF81800F
+#define OID_RT_PRO_SET_CR_NEW_FILTER 0xFF818010
+#define OID_RT_PRO_SET_TX_POWER_CONTROL 0xFF818011
+#define OID_RT_PRO_SET_CR_TX_CONFIG 0xFF818012
+#define OID_RT_PRO_GET_TX_POWER_CONTROL 0xFF818013
+#define OID_RT_PRO_GET_CR_SIGNAL_QUALITY 0xFF818014
+#define OID_RT_PRO_SET_CR_SETPOINT 0xFF818015
+#define OID_RT_PRO_SET_INTEGRATOR 0xFF818016
+#define OID_RT_PRO_SET_SIGNAL_QUALITY 0xFF818017
+#define OID_RT_PRO_GET_INTEGRATOR 0xFF818018
+#define OID_RT_PRO_GET_SIGNAL_QUALITY 0xFF818019
+#define OID_RT_PRO_QUERY_EEPROM_TYPE 0xFF81801A
+#define OID_RT_PRO_WRITE_MAC_ADDRESS 0xFF81801B
+#define OID_RT_PRO_READ_MAC_ADDRESS 0xFF81801C
+#define OID_RT_PRO_WRITE_CIS_DATA 0xFF81801D
+#define OID_RT_PRO_READ_CIS_DATA 0xFF81801E
+#define OID_RT_PRO_WRITE_POWER_CONTROL 0xFF81801F
+#define OID_RT_PRO_READ_POWER_CONTROL 0xFF818020
+#define OID_RT_PRO_WRITE_EEPROM 0xFF818021
+#define OID_RT_PRO_READ_EEPROM 0xFF818022
+#define OID_RT_PRO_RESET_TX_PACKET_SENT 0xFF818023
+#define OID_RT_PRO_QUERY_TX_PACKET_SENT 0xFF818024
+#define OID_RT_PRO_RESET_RX_PACKET_RECEIVED 0xFF818025
+#define OID_RT_PRO_QUERY_RX_PACKET_RECEIVED 0xFF818026
+#define OID_RT_PRO_QUERY_RX_PACKET_CRC32_ERROR 0xFF818027
+#define OID_RT_PRO_QUERY_CURRENT_ADDRESS 0xFF818028
+#define OID_RT_PRO_QUERY_PERMANENT_ADDRESS 0xFF818029
+#define OID_RT_PRO_SET_PHILIPS_RF_PARAMETERS 0xFF81802A
+#define OID_RT_PRO_RECEIVE_PACKET 0xFF81802C
+/* added by Owen on 04/08/03 for Cameo's request */
+#define OID_RT_PRO_WRITE_EEPROM_BYTE 0xFF81802D
+#define OID_RT_PRO_READ_EEPROM_BYTE 0xFF81802E
+#define OID_RT_PRO_SET_MODULATION 0xFF81802F
+/* */
+
+/* Sean */
+#define OID_RT_DRIVER_OPTION 0xFF818080
+#define OID_RT_RF_OFF 0xFF818081
+#define OID_RT_AUTH_STATUS 0xFF818082
+
+/* */
+#define OID_RT_PRO_SET_CONTINUOUS_TX 0xFF81800B
+#define OID_RT_PRO_SET_SINGLE_CARRIER_TX 0xFF81800C
+#define OID_RT_PRO_SET_CARRIER_SUPPRESSION_TX 0xFF81802B
+#define OID_RT_PRO_SET_SINGLE_TONE_TX 0xFF818043
+/* */
+
+/* by Owen for RTL8185 Phy Status Report Utility */
+#define OID_RT_UTILITY_false_ALARM_COUNTERS 0xFF818580
+#define OID_RT_UTILITY_SELECT_DEBUG_MODE 0xFF818581
+#define OID_RT_UTILITY_SELECT_SUBCARRIER_NUMBER 0xFF818582
+#define OID_RT_UTILITY_GET_RSSI_STATUS 0xFF818583
+#define OID_RT_UTILITY_GET_FRAME_DETECTION_STATUS 0xFF818584
+#define OID_RT_UTILITY_GET_AGC_AND_FREQUENCY_OFFSET_ESTIMATION_STATUS \
+ 0xFF818585
+#define OID_RT_UTILITY_GET_CHANNEL_ESTIMATION_STATUS 0xFF818586
+/* */
+
+/* by Owen on 03/09/19-03/09/22 for RTL8185 */
+#define OID_RT_WIRELESS_MODE 0xFF818500
+#define OID_RT_SUPPORTED_RATES 0xFF818501
+#define OID_RT_DESIRED_RATES 0xFF818502
+#define OID_RT_WIRELESS_MODE_STARTING_ADHOC 0xFF818503
+/* */
+
+#define OID_RT_GET_CONNECT_STATE 0xFF030001
+#define OID_RT_RESCAN 0xFF030002
+#define OID_RT_SET_KEY_LENGTH 0xFF030003
+#define OID_RT_SET_DEFAULT_KEY_ID 0xFF030004
+
+#define OID_RT_SET_CHANNEL 0xFF010182
+#define OID_RT_SET_SNIFFER_MODE 0xFF010183
+#define OID_RT_GET_SIGNAL_QUALITY 0xFF010184
+#define OID_RT_GET_SMALL_PACKET_CRC 0xFF010185
+#define OID_RT_GET_MIDDLE_PACKET_CRC 0xFF010186
+#define OID_RT_GET_LARGE_PACKET_CRC 0xFF010187
+#define OID_RT_GET_TX_RETRY 0xFF010188
+#define OID_RT_GET_RX_RETRY 0xFF010189
+#define OID_RT_PRO_SET_FW_DIG_STATE 0xFF01018A/* S */
+#define OID_RT_PRO_SET_FW_RA_STATE 0xFF01018B/* S */
+
+#define OID_RT_GET_RX_TOTAL_PACKET 0xFF010190
+#define OID_RT_GET_TX_BEACON_OK 0xFF010191
+#define OID_RT_GET_TX_BEACON_ERR 0xFF010192
+#define OID_RT_GET_RX_ICV_ERR 0xFF010193
+#define OID_RT_SET_ENCRYPTION_ALGORITHM 0xFF010194
+#define OID_RT_SET_NO_AUTO_RESCAN 0xFF010195
+#define OID_RT_GET_PREAMBLE_MODE 0xFF010196
+#define OID_RT_GET_DRIVER_UP_DELTA_TIME 0xFF010197
+#define OID_RT_GET_AP_IP 0xFF010198
+#define OID_RT_GET_CHANNELPLAN 0xFF010199
+#define OID_RT_SET_PREAMBLE_MODE 0xFF01019A
+#define OID_RT_SET_BCN_INTVL 0xFF01019B
+#define OID_RT_GET_RF_VENDER 0xFF01019C
+#define OID_RT_DEDICATE_PROBE 0xFF01019D
+#define OID_RT_PRO_RX_FILTER_PATTERN 0xFF01019E
+
+#define OID_RT_GET_DCST_CURRENT_THRESHOLD 0xFF01019F
+
+#define OID_RT_GET_CCA_ERR 0xFF0101A0
+#define OID_RT_GET_CCA_UPGRADE_THRESHOLD 0xFF0101A1
+#define OID_RT_GET_CCA_FALLBACK_THRESHOLD 0xFF0101A2
+
+#define OID_RT_GET_CCA_UPGRADE_EVALUATE_TIMES 0xFF0101A3
+#define OID_RT_GET_CCA_FALLBACK_EVALUATE_TIMES 0xFF0101A4
+
+/* by Owen on 03/31/03 for Cameo's request */
+#define OID_RT_SET_RATE_ADAPTIVE 0xFF0101A5
+/* */
+#define OID_RT_GET_DCST_EVALUATE_PERIOD 0xFF0101A5
+#define OID_RT_GET_DCST_TIME_UNIT_INDEX 0xFF0101A6
+#define OID_RT_GET_TOTAL_TX_BYTES 0xFF0101A7
+#define OID_RT_GET_TOTAL_RX_BYTES 0xFF0101A8
+#define OID_RT_CURRENT_TX_POWER_LEVEL 0xFF0101A9
+#define OID_RT_GET_ENC_KEY_MISMATCH_COUNT 0xFF0101AA
+#define OID_RT_GET_ENC_KEY_MATCH_COUNT 0xFF0101AB
+#define OID_RT_GET_CHANNEL 0xFF0101AC
+
+#define OID_RT_SET_CHANNELPLAN 0xFF0101AD
+#define OID_RT_GET_HARDWARE_RADIO_OFF 0xFF0101AE
+#define OID_RT_CHANNELPLAN_BY_COUNTRY 0xFF0101AF
+#define OID_RT_SCAN_AVAILABLE_BSSID 0xFF0101B0
+#define OID_RT_GET_HARDWARE_VERSION 0xFF0101B1
+#define OID_RT_GET_IS_ROAMING 0xFF0101B2
+#define OID_RT_GET_IS_PRIVACY 0xFF0101B3
+#define OID_RT_GET_KEY_MISMATCH 0xFF0101B4
+#define OID_RT_SET_RSSI_ROAM_TRAFFIC_TH 0xFF0101B5
+#define OID_RT_SET_RSSI_ROAM_SIGNAL_TH 0xFF0101B6
+#define OID_RT_RESET_LOG 0xFF0101B7
+#define OID_RT_GET_LOG 0xFF0101B8
+#define OID_RT_SET_INDICATE_HIDDEN_AP 0xFF0101B9
+#define OID_RT_GET_HEADER_FAIL 0xFF0101BA
+#define OID_RT_SUPPORTED_WIRELESS_MODE 0xFF0101BB
+#define OID_RT_GET_CHANNEL_LIST 0xFF0101BC
+#define OID_RT_GET_SCAN_IN_PROGRESS 0xFF0101BD
+#define OID_RT_GET_TX_INFO 0xFF0101BE
+#define OID_RT_RF_READ_WRITE_OFFSET 0xFF0101BF
+#define OID_RT_RF_READ_WRITE 0xFF0101C0
+
+/* For Netgear request. 2005.01.13, by rcnjko. */
+#define OID_RT_FORCED_DATA_RATE 0xFF0101C1
+#define OID_RT_WIRELESS_MODE_FOR_SCAN_LIST 0xFF0101C2
+/* For Netgear request. 2005.02.17, by rcnjko. */
+#define OID_RT_GET_BSS_WIRELESS_MODE 0xFF0101C3
+/* For AZ project. 2005.06.27, by rcnjko. */
+#define OID_RT_SCAN_WITH_MAGIC_PACKET 0xFF0101C4
+
+/* Vincent 8185MP */
+#define OID_RT_PRO_RX_FILTER 0xFF0111C0
+
+#define OID_CE_USB_WRITE_REGISTRY 0xFF0111C1
+#define OID_CE_USB_READ_REGISTRY 0xFF0111C2
+
+#define OID_RT_PRO_SET_INITIAL_GA 0xFF0111C3
+#define OID_RT_PRO_SET_BB_RF_STANDBY_MODE 0xFF0111C4
+#define OID_RT_PRO_SET_BB_RF_SHUTDOWN_MODE 0xFF0111C5
+#define OID_RT_PRO_SET_TX_CHARGE_PUMP 0xFF0111C6
+#define OID_RT_PRO_SET_RX_CHARGE_PUMP 0xFF0111C7
+#define OID_RT_PRO_RF_WRITE_REGISTRY 0xFF0111C8
+#define OID_RT_PRO_RF_READ_REGISTRY 0xFF0111C9
+#define OID_RT_PRO_QUERY_RF_TYPE 0xFF0111CA
+
+/* AP OID */
+#define OID_RT_AP_GET_ASSOCIATED_STATION_LIST 0xFF010300
+#define OID_RT_AP_GET_CURRENT_TIME_STAMP 0xFF010301
+#define OID_RT_AP_SWITCH_INTO_AP_MODE 0xFF010302
+#define OID_RT_AP_SET_DTIM_PERIOD 0xFF010303
+/* Determine if driver supports AP mode. */
+#define OID_RT_AP_SUPPORTED 0xFF010304
+/* Set WPA-PSK passphrase into authenticator. */
+#define OID_RT_AP_SET_PASSPHRASE 0xFF010305
+
+/* 8187MP. 2004.09.06, by rcnjko. */
+#define OID_RT_PRO8187_WI_POLL 0xFF818780
+#define OID_RT_PRO_WRITE_BB_REG 0xFF818781
+#define OID_RT_PRO_READ_BB_REG 0xFF818782
+#define OID_RT_PRO_WRITE_RF_REG 0xFF818783
+#define OID_RT_PRO_READ_RF_REG 0xFF818784
+
+/* Meeting House. added by Annie, 2005-07-20. */
+#define OID_RT_MH_VENDER_ID 0xFFEDC100
+
+/* 8711 MP OID added 20051230. */
+#define OID_RT_PRO8711_JOIN_BSS 0xFF871100/* S */
+
+#define OID_RT_PRO_READ_REGISTER 0xFF871101 /* Q */
+#define OID_RT_PRO_WRITE_REGISTER 0xFF871102 /* S */
+
+#define OID_RT_PRO_BURST_READ_REGISTER 0xFF871103 /* Q */
+#define OID_RT_PRO_BURST_WRITE_REGISTER 0xFF871104 /* S */
+
+#define OID_RT_PRO_WRITE_TXCMD 0xFF871105 /* S */
+
+#define OID_RT_PRO_READ16_EEPROM 0xFF871106 /* Q */
+#define OID_RT_PRO_WRITE16_EEPROM 0xFF871107 /* S */
+
+#define OID_RT_PRO_H2C_SET_COMMAND 0xFF871108 /* S */
+#define OID_RT_PRO_H2C_QUERY_RESULT 0xFF871109 /* Q */
+
+#define OID_RT_PRO8711_WI_POLL 0xFF87110A /* Q */
+#define OID_RT_PRO8711_PKT_LOSS 0xFF87110B /* Q */
+#define OID_RT_RD_ATTRIB_MEM 0xFF87110C/* Q */
+#define OID_RT_WR_ATTRIB_MEM 0xFF87110D/* S */
+
+/* Method 2 for H2C/C2H */
+#define OID_RT_PRO_H2C_CMD_MODE 0xFF871110 /* S */
+#define OID_RT_PRO_H2C_CMD_RSP_MODE 0xFF871111 /* Q */
+#define OID_RT_PRO_H2C_CMD_EVENT_MODE 0xFF871112 /* S */
+#define OID_RT_PRO_WAIT_C2H_EVENT 0xFF871113 /* Q */
+#define OID_RT_PRO_RW_ACCESS_PROTOCOL_TEST 0xFF871114/* Q */
+
+#define OID_RT_PRO_SCSI_ACCESS_TEST 0xFF871115 /* Q, S */
+
+#define OID_RT_PRO_SCSI_TCPIPOFFLOAD_OUT 0xFF871116 /* S */
+#define OID_RT_PRO_SCSI_TCPIPOFFLOAD_IN 0xFF871117 /* Q,S */
+#define OID_RT_RRO_RX_PKT_VIA_IOCTRL 0xFF871118 /* Q */
+#define OID_RT_RRO_RX_PKTARRAY_VIA_IOCTRL 0xFF871119 /* Q */
+
+#define OID_RT_RPO_SET_PWRMGT_TEST 0xFF87111A /* S */
+#define OID_RT_PRO_QRY_PWRMGT_TEST 0XFF87111B /* Q */
+#define OID_RT_RPO_ASYNC_RWIO_TEST 0xFF87111C /* S */
+#define OID_RT_RPO_ASYNC_RWIO_POLL 0xFF87111D /* Q */
+#define OID_RT_PRO_SET_RF_INTFS 0xFF87111E /* S */
+#define OID_RT_POLL_RX_STATUS 0xFF87111F /* Q */
+
+#define OID_RT_PRO_CFG_DEBUG_MESSAGE 0xFF871120 /* Q,S */
+#define OID_RT_PRO_SET_DATA_RATE_EX 0xFF871121/* S */
+#define OID_RT_PRO_SET_BASIC_RATE 0xFF871122/* S */
+#define OID_RT_PRO_READ_TSSI 0xFF871123/* S */
+#define OID_RT_PRO_SET_POWER_TRACKING 0xFF871124/* S */
+
+#define OID_RT_PRO_QRY_PWRSTATE 0xFF871150 /* Q */
+#define OID_RT_PRO_SET_PWRSTATE 0xFF871151 /* S */
+
+/* Method 2 , using workitem */
+#define OID_RT_SET_READ_REG 0xFF871181 /* S */
+#define OID_RT_SET_WRITE_REG 0xFF871182 /* S */
+#define OID_RT_SET_BURST_READ_REG 0xFF871183 /* S */
+#define OID_RT_SET_BURST_WRITE_REG 0xFF871184 /* S */
+#define OID_RT_SET_WRITE_TXCMD 0xFF871185 /* S */
+#define OID_RT_SET_READ16_EEPROM 0xFF871186 /* S */
+#define OID_RT_SET_WRITE16_EEPROM 0xFF871187 /* S */
+#define OID_RT_QRY_POLL_WKITEM 0xFF871188 /* Q */
+
+/* For SDIO INTERFACE only */
+#define OID_RT_PRO_SYNCPAGERW_SRAM 0xFF8711A0 /* Q, S */
+#define OID_RT_PRO_871X_DRV_EXT 0xFF8711A1
+
+/* For USB INTERFACE only */
+#define OID_RT_PRO_USB_VENDOR_REQ 0xFF8711B0 /* Q, S */
+#define OID_RT_PRO_SCSI_AUTO_TEST 0xFF8711B1 /* S */
+#define OID_RT_PRO_USB_MAC_AC_FIFO_WRITE 0xFF8711B2 /* S */
+#define OID_RT_PRO_USB_MAC_RX_FIFO_READ 0xFF8711B3 /* Q */
+#define OID_RT_PRO_USB_MAC_RX_FIFO_POLLING 0xFF8711B4 /* Q */
+
+#define OID_RT_PRO_H2C_SET_RATE_TABLE 0xFF8711FB /* S */
+#define OID_RT_PRO_H2C_GET_RATE_TABLE 0xFF8711FC /* S */
+#define OID_RT_PRO_H2C_C2H_LBK_TEST 0xFF8711FE
+
+#define OID_RT_PRO_ENCRYPTION_CTRL 0xFF871200 /* Q, S */
+#define OID_RT_PRO_ADD_STA_INFO 0xFF871201 /* S */
+#define OID_RT_PRO_DELE_STA_INFO 0xFF871202 /* S */
+#define OID_RT_PRO_QUERY_DR_VARIABLE 0xFF871203 /* Q */
+
+#define OID_RT_PRO_RX_PACKET_TYPE 0xFF871204 /* Q, S */
+
+#define OID_RT_PRO_READ_EFUSE 0xFF871205 /* Q */
+#define OID_RT_PRO_WRITE_EFUSE 0xFF871206 /* S */
+#define OID_RT_PRO_RW_EFUSE_PGPKT 0xFF871207 /* Q, S */
+#define OID_RT_GET_EFUSE_CURRENT_SIZE 0xFF871208 /* Q */
+
+#define OID_RT_SET_BANDWIDTH 0xFF871209 /* S */
+#define OID_RT_SET_CRYSTAL_CAP 0xFF87120A /* S */
+
+#define OID_RT_SET_RX_PACKET_TYPE 0xFF87120B /* S */
+
+#define OID_RT_GET_EFUSE_MAX_SIZE 0xFF87120C /* Q */
+
+#define OID_RT_PRO_SET_TX_AGC_OFFSET 0xFF87120D /* S */
+
+#define OID_RT_PRO_SET_PKT_TEST_MODE 0xFF87120E /* S */
+
+#define OID_RT_PRO_FOR_EVM_TEST_SETTING 0xFF87120F /* S */
+
+#define OID_RT_PRO_GET_THERMAL_METER 0xFF871210 /* Q */
+
+#define OID_RT_RESET_PHY_RX_PACKET_COUNT 0xFF871211 /* S */
+#define OID_RT_GET_PHY_RX_PACKET_RECEIVED 0xFF871212 /* Q */
+#define OID_RT_GET_PHY_RX_PACKET_CRC32_ERROR 0xFF871213 /* Q */
+
+#define OID_RT_SET_POWER_DOWN 0xFF871214 /* S */
+
+#define OID_RT_GET_POWER_MODE 0xFF871215 /* Q */
+
+#define OID_RT_PRO_EFUSE 0xFF871216 /* Q, S */
+#define OID_RT_PRO_EFUSE_MAP 0xFF871217 /* Q, S */
+
+#endif /* ifndef __CUSTOM_OID_H */
diff --git a/drivers/staging/r8188eu/include/nic_spec.h b/drivers/staging/r8188eu/include/nic_spec.h
new file mode 100644
index 000000000000..cee6f06a4570
--- /dev/null
+++ b/drivers/staging/r8188eu/include/nic_spec.h
@@ -0,0 +1,41 @@
+/******************************************************************************
+ *
+ * Copyright(c) 2007 - 2011 Realtek Corporation. All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of version 2 of the GNU General Public License as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
+ * more details.
+ *
+ * You should have received a copy of the GNU General Public License along with
+ * this program; if not, write to the Free Software Foundation, Inc.,
+ * 51 Franklin Street, Fifth Floor, Boston, MA 02110, USA
+ *
+ *
+ ******************************************************************************/
+
+#ifndef __NIC_SPEC_H__
+#define __NIC_SPEC_H__
+
+#define RTL8711_MCTRL_ (0x20000)
+#define RTL8711_UART_ (0x30000)
+#define RTL8711_TIMER_ (0x40000)
+#define RTL8711_FINT_ (0x50000)
+#define RTL8711_HINT_ (0x50000)
+#define RTL8711_GPIO_ (0x60000)
+#define RTL8711_WLANCTRL_ (0x200000)
+#define RTL8711_WLANFF_ (0xe00000)
+#define RTL8711_HCICTRL_ (0x600000)
+#define RTL8711_SYSCFG_ (0x620000)
+#define RTL8711_SYSCTRL_ (0x620000)
+#define RTL8711_MCCTRL_ (0x020000)
+
+#include <rtl8711_regdef.h>
+
+#include <rtl8711_bitdef.h>
+
+#endif /* __RTL8711_SPEC_H__ */
diff --git a/drivers/staging/r8188eu/include/odm.h b/drivers/staging/r8188eu/include/odm.h
new file mode 100644
index 000000000000..61836c32123f
--- /dev/null
+++ b/drivers/staging/r8188eu/include/odm.h
@@ -0,0 +1,1182 @@
+/******************************************************************************
+ *
+ * Copyright(c) 2007 - 2011 Realtek Corporation. All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of version 2 of the GNU General Public License as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
+ * more details.
+ *
+ * You should have received a copy of the GNU General Public License along with
+ * this program; if not, write to the Free Software Foundation, Inc.,
+ * 51 Franklin Street, Fifth Floor, Boston, MA 02110, USA
+ *
+ *
+ ******************************************************************************/
+
+#ifndef __HALDMOUTSRC_H__
+#define __HALDMOUTSRC_H__
+
+/* Definition */
+/* Define all team support ability. */
+
+/* Define for all teams. Please Define the constant in your precomp header. */
+
+/* define DM_ODM_SUPPORT_AP 0 */
+/* define DM_ODM_SUPPORT_ADSL 0 */
+/* define DM_ODM_SUPPORT_CE 0 */
+/* define DM_ODM_SUPPORT_MP 1 */
+
+/* Define ODM SW team support flag. */
+
+/* Antenna Switch Relative Definition. */
+
+/* Add new function SwAntDivCheck8192C(). */
+/* This is the main function of Antenna diversity function before link. */
+/* Mainly, it just retains last scan result and scan again. */
+/* After that, it compares the scan result to see which one gets better
+ * RSSI. It selects antenna with better receiving power and returns better
+ * scan result. */
+
+#define TP_MODE 0
+#define RSSI_MODE 1
+#define TRAFFIC_LOW 0
+#define TRAFFIC_HIGH 1
+
+/* 3 Tx Power Tracking */
+/* 3============================================================ */
+#define DPK_DELTA_MAPPING_NUM 13
+#define index_mapping_HP_NUM 15
+
+/* */
+/* 3 PSD Handler */
+/* 3============================================================ */
+
+#define AFH_PSD 1 /* 0:normal PSD scan, 1: only do 20 pts PSD */
+#define MODE_40M 0 /* 0:20M, 1:40M */
+#define PSD_TH2 3
+#define PSD_CHM 20 /* Minimum channel number for BT AFH */
+#define SIR_STEP_SIZE 3
+#define Smooth_Size_1 5
+#define Smooth_TH_1 3
+#define Smooth_Size_2 10
+#define Smooth_TH_2 4
+#define Smooth_Size_3 20
+#define Smooth_TH_3 4
+#define Smooth_Step_Size 5
+#define Adaptive_SIR 1
+#define PSD_RESCAN 4
+#define PSD_SCAN_INTERVAL 700 /* ms */
+
+/* 8723A High Power IGI Setting */
+#define DM_DIG_HIGH_PWR_IGI_LOWER_BOUND 0x22
+#define DM_DIG_Gmode_HIGH_PWR_IGI_LOWER_BOUND 0x28
+#define DM_DIG_HIGH_PWR_THRESHOLD 0x3a
+
+/* LPS define */
+#define DM_DIG_FA_TH0_LPS 4 /* 4 in lps */
+#define DM_DIG_FA_TH1_LPS 15 /* 15 lps */
+#define DM_DIG_FA_TH2_LPS 30 /* 30 lps */
+#define RSSI_OFFSET_DIG 0x05;
+
+/* ANT Test */
+#define ANTTESTALL 0x00 /* Ant A or B will be Testing */
+#define ANTTESTA 0x01 /* Ant A will be Testing */
+#define ANTTESTB 0x02 /* Ant B will be testing */
+
+/* structure and define */
+
+/* Add for AP/ADSLpseudo DM structuer requirement. */
+/* We need to remove to other position??? */
+struct rtl8192cd_priv {
+ u8 temp;
+};
+
+struct rtw_dig {
+ u8 Dig_Enable_Flag;
+ u8 Dig_Ext_Port_Stage;
+
+ int RssiLowThresh;
+ int RssiHighThresh;
+
+ u32 FALowThresh;
+ u32 FAHighThresh;
+
+ u8 CurSTAConnectState;
+ u8 PreSTAConnectState;
+ u8 CurMultiSTAConnectState;
+
+ u8 PreIGValue;
+ u8 CurIGValue;
+ u8 BackupIGValue;
+
+ s8 BackoffVal;
+ s8 BackoffVal_range_max;
+ s8 BackoffVal_range_min;
+ u8 rx_gain_range_max;
+ u8 rx_gain_range_min;
+ u8 Rssi_val_min;
+
+ u8 PreCCK_CCAThres;
+ u8 CurCCK_CCAThres;
+ u8 PreCCKPDState;
+ u8 CurCCKPDState;
+
+ u8 LargeFAHit;
+ u8 ForbiddenIGI;
+ u32 Recover_cnt;
+
+ u8 DIG_Dynamic_MIN_0;
+ u8 DIG_Dynamic_MIN_1;
+ bool bMediaConnect_0;
+ bool bMediaConnect_1;
+
+ u32 AntDiv_RSSI_max;
+ u32 RSSI_max;
+};
+
+struct rtl_ps {
+ u8 PreCCAState;
+ u8 CurCCAState;
+
+ u8 PreRFState;
+ u8 CurRFState;
+
+ int Rssi_val_min;
+
+ u8 initialize;
+ u32 Reg874,RegC70,Reg85C,RegA74;
+
+};
+
+struct false_alarm_stats {
+ u32 Cnt_Parity_Fail;
+ u32 Cnt_Rate_Illegal;
+ u32 Cnt_Crc8_fail;
+ u32 Cnt_Mcs_fail;
+ u32 Cnt_Ofdm_fail;
+ u32 Cnt_Cck_fail;
+ u32 Cnt_all;
+ u32 Cnt_Fast_Fsync;
+ u32 Cnt_SB_Search_fail;
+ u32 Cnt_OFDM_CCA;
+ u32 Cnt_CCK_CCA;
+ u32 Cnt_CCA_all;
+ u32 Cnt_BW_USC; /* Gary */
+ u32 Cnt_BW_LSC; /* Gary */
+};
+
+struct dyn_primary_cca {
+ u8 PriCCA_flag;
+ u8 intf_flag;
+ u8 intf_type;
+ u8 DupRTS_flag;
+ u8 Monitor_flag;
+};
+
+struct rx_hpc {
+ u8 RXHP_flag;
+ u8 PSD_func_trigger;
+ u8 PSD_bitmap_RXHP[80];
+ u8 Pre_IGI;
+ u8 Cur_IGI;
+ u8 Pre_pw_th;
+ u8 Cur_pw_th;
+ bool First_time_enter;
+ bool RXHP_enable;
+ u8 TP_Mode;
+ struct timer_list PSDTimer;
+};
+
+#define ASSOCIATE_ENTRY_NUM 32 /* Max size of AsocEntry[]. */
+#define ODM_ASSOCIATE_ENTRY_NUM ASSOCIATE_ENTRY_NUM
+
+/* This indicates two different steps. */
+/* In SWAW_STEP_PEAK, driver needs to switch antenna and listen to
+ * the signal on the air. */
+/* In SWAW_STEP_DETERMINE, driver just compares the signal captured in
+ * SWAW_STEP_PEAK with original RSSI to determine if it is necessary to
+ * switch antenna. */
+
+#define SWAW_STEP_PEAK 0
+#define SWAW_STEP_DETERMINE 1
+
+#define TP_MODE 0
+#define RSSI_MODE 1
+#define TRAFFIC_LOW 0
+#define TRAFFIC_HIGH 1
+
+struct sw_ant_switch {
+ u8 try_flag;
+ s32 PreRSSI;
+ u8 CurAntenna;
+ u8 PreAntenna;
+ u8 RSSI_Trying;
+ u8 TestMode;
+ u8 bTriggerAntennaSwitch;
+ u8 SelectAntennaMap;
+ u8 RSSI_target;
+
+ /* Before link Antenna Switch check */
+ u8 SWAS_NoLink_State;
+ u32 SWAS_NoLink_BK_Reg860;
+ bool ANTA_ON; /* To indicate Ant A is or not */
+ bool ANTB_ON; /* To indicate Ant B is on or not */
+
+ s32 RSSI_sum_A;
+ s32 RSSI_sum_B;
+ s32 RSSI_cnt_A;
+ s32 RSSI_cnt_B;
+ u64 lastTxOkCnt;
+ u64 lastRxOkCnt;
+ u64 TXByteCnt_A;
+ u64 TXByteCnt_B;
+ u64 RXByteCnt_A;
+ u64 RXByteCnt_B;
+ u8 TrafficLoad;
+ struct timer_list SwAntennaSwitchTimer;
+ /* Hybrid Antenna Diversity */
+ u32 CCK_Ant1_Cnt[ASSOCIATE_ENTRY_NUM];
+ u32 CCK_Ant2_Cnt[ASSOCIATE_ENTRY_NUM];
+ u32 OFDM_Ant1_Cnt[ASSOCIATE_ENTRY_NUM];
+ u32 OFDM_Ant2_Cnt[ASSOCIATE_ENTRY_NUM];
+ u32 RSSI_Ant1_Sum[ASSOCIATE_ENTRY_NUM];
+ u32 RSSI_Ant2_Sum[ASSOCIATE_ENTRY_NUM];
+ u8 TxAnt[ASSOCIATE_ENTRY_NUM];
+ u8 TargetSTA;
+ u8 antsel;
+ u8 RxIdleAnt;
+};
+
+struct edca_turbo {
+ bool bCurrentTurboEDCA;
+ bool bIsCurRDLState;
+ u32 prv_traffic_idx; /* edca turbo */
+};
+
+struct odm_rate_adapt {
+ u8 Type; /* DM_Type_ByFW/DM_Type_ByDriver */
+ u8 HighRSSIThresh; /* if RSSI > HighRSSIThresh => RATRState is DM_RATR_STA_HIGH */
+ u8 LowRSSIThresh; /* if RSSI <= LowRSSIThresh => RATRState is DM_RATR_STA_LOW */
+ u8 RATRState; /* Current RSSI level, DM_RATR_STA_HIGH/DM_RATR_STA_MIDDLE/DM_RATR_STA_LOW */
+ u32 LastRATR; /* RATR Register Content */
+};
+
+#define IQK_MAC_REG_NUM 4
+#define IQK_ADDA_REG_NUM 16
+#define IQK_BB_REG_NUM_MAX 10
+#define IQK_BB_REG_NUM 9
+#define HP_THERMAL_NUM 8
+
+#define AVG_THERMAL_NUM 8
+#define IQK_Matrix_REG_NUM 8
+#define IQK_Matrix_Settings_NUM 1+24+21
+
+#define DM_Type_ByFWi 0
+#define DM_Type_ByDriver 1
+
+/* Declare for common info */
+
+struct odm_phy_status_info {
+ u8 RxPWDBAll;
+ u8 SignalQuality; /* in 0-100 index. */
+ u8 RxMIMOSignalQuality[MAX_PATH_NUM_92CS]; /* EVM */
+ u8 RxMIMOSignalStrength[MAX_PATH_NUM_92CS];/* in 0~100 index */
+ s8 RxPower; /* in dBm Translate from PWdB */
+ s8 RecvSignalPower;/* Real power in dBm for this packet, no
+ * beautification and aggregation. Keep this raw
+ * info to be used for the other procedures. */
+ u8 BTRxRSSIPercentage;
+ u8 SignalStrength; /* in 0-100 index. */
+ u8 RxPwr[MAX_PATH_NUM_92CS];/* per-path's pwdb */
+ u8 RxSNR[MAX_PATH_NUM_92CS];/* per-path's SNR */
+};
+
+struct odm_phy_dbg_info {
+ /* ODM Write,debug info */
+ s8 RxSNRdB[MAX_PATH_NUM_92CS];
+ u64 NumQryPhyStatus;
+ u64 NumQryPhyStatusCCK;
+ u64 NumQryPhyStatusOFDM;
+ /* Others */
+ s32 RxEVM[MAX_PATH_NUM_92CS];
+};
+
+struct odm_per_pkt_info {
+ s8 Rate;
+ u8 StationID;
+ bool bPacketMatchBSSID;
+ bool bPacketToSelf;
+ bool bPacketBeacon;
+};
+
+struct odm_mac_status_info {
+ u8 test;
+};
+
+enum odm_ability {
+ /* BB Team */
+ ODM_DIG = 0x00000001,
+ ODM_HIGH_POWER = 0x00000002,
+ ODM_CCK_CCA_TH = 0x00000004,
+ ODM_FA_STATISTICS = 0x00000008,
+ ODM_RAMASK = 0x00000010,
+ ODM_RSSI_MONITOR = 0x00000020,
+ ODM_SW_ANTDIV = 0x00000040,
+ ODM_HW_ANTDIV = 0x00000080,
+ ODM_BB_PWRSV = 0x00000100,
+ ODM_2TPATHDIV = 0x00000200,
+ ODM_1TPATHDIV = 0x00000400,
+ ODM_PSD2AFH = 0x00000800
+};
+
+/* 2011/20/20 MH For MP driver RT_WLAN_STA = struct sta_info */
+/* Please declare below ODM relative info in your STA info structure. */
+
+struct odm_sta_info {
+ /* Driver Write */
+ bool bUsed; /* record the sta status link or not? */
+ u8 IOTPeer; /* Enum value. HT_IOT_PEER_E */
+
+ /* ODM Write */
+ /* 1 PHY_STATUS_INFO */
+ u8 RSSI_Path[4]; /* */
+ u8 RSSI_Ave;
+ u8 RXEVM[4];
+ u8 RXSNR[4];
+};
+
+/* 2011/10/20 MH Define Common info enum for all team. */
+
+enum odm_common_info_def {
+ /* Fixed value: */
+
+ /* HOOK BEFORE REG INIT----------- */
+ ODM_CMNINFO_PLATFORM = 0,
+ ODM_CMNINFO_ABILITY, /* ODM_ABILITY_E */
+ ODM_CMNINFO_INTERFACE, /* ODM_INTERFACE_E */
+ ODM_CMNINFO_MP_TEST_CHIP,
+ ODM_CMNINFO_IC_TYPE, /* ODM_IC_TYPE_E */
+ ODM_CMNINFO_CUT_VER, /* ODM_CUT_VERSION_E */
+ ODM_CMNINFO_FAB_VER, /* ODM_FAB_E */
+ ODM_CMNINFO_RF_TYPE, /* RF_PATH_E or ODM_RF_TYPE_E? */
+ ODM_CMNINFO_BOARD_TYPE, /* ODM_BOARD_TYPE_E */
+ ODM_CMNINFO_EXT_LNA, /* true */
+ ODM_CMNINFO_EXT_PA,
+ ODM_CMNINFO_EXT_TRSW,
+ ODM_CMNINFO_PATCH_ID, /* CUSTOMER ID */
+ ODM_CMNINFO_BINHCT_TEST,
+ ODM_CMNINFO_BWIFI_TEST,
+ ODM_CMNINFO_SMART_CONCURRENT,
+ /* HOOK BEFORE REG INIT----------- */
+
+ /* Dynamic value: */
+/* POINTER REFERENCE----------- */
+ ODM_CMNINFO_MAC_PHY_MODE, /* ODM_MAC_PHY_MODE_E */
+ ODM_CMNINFO_TX_UNI,
+ ODM_CMNINFO_RX_UNI,
+ ODM_CMNINFO_WM_MODE, /* ODM_WIRELESS_MODE_E */
+ ODM_CMNINFO_BAND, /* ODM_BAND_TYPE_E */
+ ODM_CMNINFO_SEC_CHNL_OFFSET, /* ODM_SEC_CHNL_OFFSET_E */
+ ODM_CMNINFO_SEC_MODE, /* ODM_SECURITY_E */
+ ODM_CMNINFO_BW, /* ODM_BW_E */
+ ODM_CMNINFO_CHNL,
+
+ ODM_CMNINFO_DMSP_GET_VALUE,
+ ODM_CMNINFO_BUDDY_ADAPTOR,
+ ODM_CMNINFO_DMSP_IS_MASTER,
+ ODM_CMNINFO_SCAN,
+ ODM_CMNINFO_POWER_SAVING,
+ ODM_CMNINFO_ONE_PATH_CCA, /* ODM_CCA_PATH_E */
+ ODM_CMNINFO_DRV_STOP,
+ ODM_CMNINFO_PNP_IN,
+ ODM_CMNINFO_INIT_ON,
+ ODM_CMNINFO_ANT_TEST,
+ ODM_CMNINFO_NET_CLOSED,
+ ODM_CMNINFO_MP_MODE,
+/* POINTER REFERENCE----------- */
+
+/* CALL BY VALUE------------- */
+ ODM_CMNINFO_WIFI_DIRECT,
+ ODM_CMNINFO_WIFI_DISPLAY,
+ ODM_CMNINFO_LINK,
+ ODM_CMNINFO_RSSI_MIN,
+ ODM_CMNINFO_DBG_COMP, /* u64 */
+ ODM_CMNINFO_DBG_LEVEL, /* u32 */
+ ODM_CMNINFO_RA_THRESHOLD_HIGH, /* u8 */
+ ODM_CMNINFO_RA_THRESHOLD_LOW, /* u8 */
+ ODM_CMNINFO_RF_ANTENNA_TYPE, /* u8 */
+ ODM_CMNINFO_BT_DISABLED,
+ ODM_CMNINFO_BT_OPERATION,
+ ODM_CMNINFO_BT_DIG,
+ ODM_CMNINFO_BT_BUSY, /* Check Bt is using or not */
+ ODM_CMNINFO_BT_DISABLE_EDCA,
+/* CALL BY VALUE-------------*/
+
+ /* Dynamic ptr array hook itms. */
+ ODM_CMNINFO_STA_STATUS,
+ ODM_CMNINFO_PHY_STATUS,
+ ODM_CMNINFO_MAC_STATUS,
+ ODM_CMNINFO_MAX,
+};
+
+/* 2011/10/20 MH Define ODM support ability. ODM_CMNINFO_ABILITY */
+
+enum odm_ability_def {
+ /* BB ODM section BIT 0-15 */
+ ODM_BB_DIG = BIT0,
+ ODM_BB_RA_MASK = BIT1,
+ ODM_BB_DYNAMIC_TXPWR = BIT2,
+ ODM_BB_FA_CNT = BIT3,
+ ODM_BB_RSSI_MONITOR = BIT4,
+ ODM_BB_CCK_PD = BIT5,
+ ODM_BB_ANT_DIV = BIT6,
+ ODM_BB_PWR_SAVE = BIT7,
+ ODM_BB_PWR_TRA = BIT8,
+ ODM_BB_RATE_ADAPTIVE = BIT9,
+ ODM_BB_PATH_DIV = BIT10,
+ ODM_BB_PSD = BIT11,
+ ODM_BB_RXHP = BIT12,
+
+ /* MAC DM section BIT 16-23 */
+ ODM_MAC_EDCA_TURBO = BIT16,
+ ODM_MAC_EARLY_MODE = BIT17,
+
+ /* RF ODM section BIT 24-31 */
+ ODM_RF_TX_PWR_TRACK = BIT24,
+ ODM_RF_RX_GAIN_TRACK = BIT25,
+ ODM_RF_CALIBRATION = BIT26,
+};
+
+/* ODM_CMNINFO_INTERFACE */
+enum odm_interface_def {
+ ODM_ITRF_PCIE = 0x1,
+ ODM_ITRF_USB = 0x2,
+ ODM_ITRF_SDIO = 0x4,
+ ODM_ITRF_ALL = 0x7,
+};
+
+/* ODM_CMNINFO_IC_TYPE */
+enum odm_ic_type {
+ ODM_RTL8192S = BIT0,
+ ODM_RTL8192C = BIT1,
+ ODM_RTL8192D = BIT2,
+ ODM_RTL8723A = BIT3,
+ ODM_RTL8188E = BIT4,
+ ODM_RTL8812 = BIT5,
+ ODM_RTL8821 = BIT6,
+};
+
+#define ODM_IC_11N_SERIES \
+ (ODM_RTL8192S | ODM_RTL8192C | ODM_RTL8192D | \
+ ODM_RTL8723A | ODM_RTL8188E)
+#define ODM_IC_11AC_SERIES (ODM_RTL8812)
+
+/* ODM_CMNINFO_CUT_VER */
+enum odm_cut_version {
+ ODM_CUT_A = 1,
+ ODM_CUT_B = 2,
+ ODM_CUT_C = 3,
+ ODM_CUT_D = 4,
+ ODM_CUT_E = 5,
+ ODM_CUT_F = 6,
+ ODM_CUT_TEST = 7,
+};
+
+/* ODM_CMNINFO_FAB_VER */
+enum odm_fab_Version {
+ ODM_TSMC = 0,
+ ODM_UMC = 1,
+};
+
+/* ODM_CMNINFO_RF_TYPE */
+/* For example 1T2R (A+AB = BIT0|BIT4|BIT5) */
+enum odm_rf_path {
+ ODM_RF_TX_A = BIT0,
+ ODM_RF_TX_B = BIT1,
+ ODM_RF_TX_C = BIT2,
+ ODM_RF_TX_D = BIT3,
+ ODM_RF_RX_A = BIT4,
+ ODM_RF_RX_B = BIT5,
+ ODM_RF_RX_C = BIT6,
+ ODM_RF_RX_D = BIT7,
+};
+
+enum odm_rf_type {
+ ODM_1T1R = 0,
+ ODM_1T2R = 1,
+ ODM_2T2R = 2,
+ ODM_2T3R = 3,
+ ODM_2T4R = 4,
+ ODM_3T3R = 5,
+ ODM_3T4R = 6,
+ ODM_4T4R = 7,
+};
+
+/* ODM Dynamic common info value definition */
+
+enum odm_mac_phy_mode {
+ ODM_SMSP = 0,
+ ODM_DMSP = 1,
+ ODM_DMDP = 2,
+};
+
+enum odm_bt_coexist {
+ ODM_BT_BUSY = 1,
+ ODM_BT_ON = 2,
+ ODM_BT_OFF = 3,
+ ODM_BT_NONE = 4,
+};
+
+/* ODM_CMNINFO_OP_MODE */
+enum odm_operation_mode {
+ ODM_NO_LINK = BIT0,
+ ODM_LINK = BIT1,
+ ODM_SCAN = BIT2,
+ ODM_POWERSAVE = BIT3,
+ ODM_AP_MODE = BIT4,
+ ODM_CLIENT_MODE = BIT5,
+ ODM_AD_HOC = BIT6,
+ ODM_WIFI_DIRECT = BIT7,
+ ODM_WIFI_DISPLAY = BIT8,
+};
+
+/* ODM_CMNINFO_WM_MODE */
+enum odm_wireless_mode {
+ ODM_WM_UNKNOW = 0x0,
+ ODM_WM_B = BIT0,
+ ODM_WM_G = BIT1,
+ ODM_WM_A = BIT2,
+ ODM_WM_N24G = BIT3,
+ ODM_WM_N5G = BIT4,
+ ODM_WM_AUTO = BIT5,
+ ODM_WM_AC = BIT6,
+};
+
+/* ODM_CMNINFO_BAND */
+enum odm_band_type {
+ ODM_BAND_2_4G = BIT0,
+ ODM_BAND_5G = BIT1,
+};
+
+/* ODM_CMNINFO_SEC_CHNL_OFFSET */
+enum odm_sec_chnl_offset {
+ ODM_DONT_CARE = 0,
+ ODM_BELOW = 1,
+ ODM_ABOVE = 2
+};
+
+/* ODM_CMNINFO_SEC_MODE */
+enum odm_security {
+ ODM_SEC_OPEN = 0,
+ ODM_SEC_WEP40 = 1,
+ ODM_SEC_TKIP = 2,
+ ODM_SEC_RESERVE = 3,
+ ODM_SEC_AESCCMP = 4,
+ ODM_SEC_WEP104 = 5,
+ ODM_WEP_WPA_MIXED = 6, /* WEP + WPA */
+ ODM_SEC_SMS4 = 7,
+};
+
+/* ODM_CMNINFO_BW */
+enum odm_bw {
+ ODM_BW20M = 0,
+ ODM_BW40M = 1,
+ ODM_BW80M = 2,
+ ODM_BW160M = 3,
+ ODM_BW10M = 4,
+};
+
+/* ODM_CMNINFO_BOARD_TYPE */
+enum odm_board_type {
+ ODM_BOARD_NORMAL = 0,
+ ODM_BOARD_HIGHPWR = 1,
+ ODM_BOARD_MINICARD = 2,
+ ODM_BOARD_SLIM = 3,
+ ODM_BOARD_COMBO = 4,
+};
+
+/* ODM_CMNINFO_ONE_PATH_CCA */
+enum odm_cca_path {
+ ODM_CCA_2R = 0,
+ ODM_CCA_1R_A = 1,
+ ODM_CCA_1R_B = 2,
+};
+
+struct odm_ra_info {
+ u8 RateID;
+ u32 RateMask;
+ u32 RAUseRate;
+ u8 RateSGI;
+ u8 RssiStaRA;
+ u8 PreRssiStaRA;
+ u8 SGIEnable;
+ u8 DecisionRate;
+ u8 PreRate;
+ u8 HighestRate;
+ u8 LowestRate;
+ u32 NscUp;
+ u32 NscDown;
+ u16 RTY[5];
+ u32 TOTAL;
+ u16 DROP;
+ u8 Active;
+ u16 RptTime;
+ u8 RAWaitingCounter;
+ u8 RAPendingCounter;
+ u8 PTActive; /* on or off */
+ u8 PTTryState; /* 0 trying state, 1 for decision state */
+ u8 PTStage; /* 0~6 */
+ u8 PTStopCount; /* Stop PT counter */
+ u8 PTPreRate; /* if rate change do PT */
+ u8 PTPreRssi; /* if RSSI change 5% do PT */
+ u8 PTModeSS; /* decide whitch rate should do PT */
+ u8 RAstage; /* StageRA, decide how many times RA will be done
+ * between PT */
+ u8 PTSmoothFactor;
+};
+
+struct ijk_matrix_regs_set {
+ bool bIQKDone;
+ s32 Value[1][IQK_Matrix_REG_NUM];
+};
+
+struct odm_rf_cal {
+ /* for tx power tracking */
+ u32 RegA24; /* for TempCCK */
+ s32 RegE94;
+ s32 RegE9C;
+ s32 RegEB4;
+ s32 RegEBC;
+
+ u8 TXPowercount;
+ bool bTXPowerTrackingInit;
+ bool bTXPowerTracking;
+ u8 TxPowerTrackControl; /* for mp mode, turn off txpwrtracking
+ * as default */
+ u8 TM_Trigger;
+ u8 InternalPA5G[2]; /* pathA / pathB */
+
+ u8 ThermalMeter[2]; /* ThermalMeter, index 0 for RFIC0,
+ * and 1 for RFIC1 */
+ u8 ThermalValue;
+ u8 ThermalValue_LCK;
+ u8 ThermalValue_IQK;
+ u8 ThermalValue_DPK;
+ u8 ThermalValue_AVG[AVG_THERMAL_NUM];
+ u8 ThermalValue_AVG_index;
+ u8 ThermalValue_RxGain;
+ u8 ThermalValue_Crystal;
+ u8 ThermalValue_DPKstore;
+ u8 ThermalValue_DPKtrack;
+ bool TxPowerTrackingInProgress;
+ bool bDPKenable;
+
+ bool bReloadtxpowerindex;
+ u8 bRfPiEnable;
+ u32 TXPowerTrackingCallbackCnt; /* cosa add for debug */
+
+ u8 bCCKinCH14;
+ u8 CCK_index;
+ u8 OFDM_index[2];
+ bool bDoneTxpower;
+
+ u8 ThermalValue_HP[HP_THERMAL_NUM];
+ u8 ThermalValue_HP_index;
+ struct ijk_matrix_regs_set IQKMatrixRegSetting[IQK_Matrix_Settings_NUM];
+
+ u8 Delta_IQK;
+ u8 Delta_LCK;
+
+ /* for IQK */
+ u32 RegC04;
+ u32 Reg874;
+ u32 RegC08;
+ u32 RegB68;
+ u32 RegB6C;
+ u32 Reg870;
+ u32 Reg860;
+ u32 Reg864;
+
+ bool bIQKInitialized;
+ bool bLCKInProgress;
+ bool bAntennaDetected;
+ u32 ADDA_backup[IQK_ADDA_REG_NUM];
+ u32 IQK_MAC_backup[IQK_MAC_REG_NUM];
+ u32 IQK_BB_backup_recover[9];
+ u32 IQK_BB_backup[IQK_BB_REG_NUM];
+
+ /* for APK */
+ u32 APKoutput[2][2]; /* path A/B; output1_1a/output1_2a */
+ u8 bAPKdone;
+ u8 bAPKThermalMeterIgnore;
+ u8 bDPdone;
+ u8 bDPPathAOK;
+ u8 bDPPathBOK;
+};
+
+/* ODM Dynamic common info value definition */
+
+struct fast_ant_train {
+ u8 Bssid[6];
+ u8 antsel_rx_keep_0;
+ u8 antsel_rx_keep_1;
+ u8 antsel_rx_keep_2;
+ u32 antSumRSSI[7];
+ u32 antRSSIcnt[7];
+ u32 antAveRSSI[7];
+ u8 FAT_State;
+ u32 TrainIdx;
+ u8 antsel_a[ODM_ASSOCIATE_ENTRY_NUM];
+ u8 antsel_b[ODM_ASSOCIATE_ENTRY_NUM];
+ u8 antsel_c[ODM_ASSOCIATE_ENTRY_NUM];
+ u32 MainAnt_Sum[ODM_ASSOCIATE_ENTRY_NUM];
+ u32 AuxAnt_Sum[ODM_ASSOCIATE_ENTRY_NUM];
+ u32 MainAnt_Cnt[ODM_ASSOCIATE_ENTRY_NUM];
+ u32 AuxAnt_Cnt[ODM_ASSOCIATE_ENTRY_NUM];
+ u8 RxIdleAnt;
+ bool bBecomeLinked;
+};
+
+enum fat_state {
+ FAT_NORMAL_STATE = 0,
+ FAT_TRAINING_STATE = 1,
+};
+
+enum ant_div_type {
+ NO_ANTDIV = 0xFF,
+ CG_TRX_HW_ANTDIV = 0x01,
+ CGCS_RX_HW_ANTDIV = 0x02,
+ FIXED_HW_ANTDIV = 0x03,
+ CG_TRX_SMART_ANTDIV = 0x04,
+ CGCS_RX_SW_ANTDIV = 0x05,
+};
+
+/* Copy from SD4 defined structure. We use to support PHY DM integration. */
+struct odm_dm_struct {
+ /* Add for different team use temporarily */
+ struct adapter *Adapter; /* For CE/NIC team */
+ struct rtl8192cd_priv *priv; /* For AP/ADSL team */
+ /* WHen you use above pointers, they must be initialized. */
+ bool odm_ready;
+
+ struct rtl8192cd_priv *fake_priv;
+ u64 DebugComponents;
+ u32 DebugLevel;
+
+/* ODM HANDLE, DRIVER NEEDS NOT TO HOOK------ */
+ bool bCckHighPower;
+ u8 RFPathRxEnable; /* ODM_CMNINFO_RFPATH_ENABLE */
+ u8 ControlChannel;
+/* ODM HANDLE, DRIVER NEEDS NOT TO HOOK------ */
+
+/* 1 COMMON INFORMATION */
+ /* Init Value */
+/* HOOK BEFORE REG INIT----------- */
+ /* ODM Platform info AP/ADSL/CE/MP = 1/2/3/4 */
+ u8 SupportPlatform;
+ /* ODM Support Ability DIG/RATR/TX_PWR_TRACK/ ¡K¡K = 1/2/3/¡K */
+ u32 SupportAbility;
+ /* ODM PCIE/USB/SDIO/GSPI = 0/1/2/3 */
+ u8 SupportInterface;
+ /* ODM composite or independent. Bit oriented/ 92C+92D+ .... or any
+ * other type = 1/2/3/... */
+ u32 SupportICType;
+ /* Cut Version TestChip/A-cut/B-cut... = 0/1/2/3/... */
+ u8 CutVersion;
+ /* Fab Version TSMC/UMC = 0/1 */
+ u8 FabVersion;
+ /* RF Type 4T4R/3T3R/2T2R/1T2R/1T1R/... */
+ u8 RFType;
+ /* Board Type Normal/HighPower/MiniCard/SLIM/Combo/. = 0/1/2/3/4/. */
+ u8 BoardType;
+ /* with external LNA NO/Yes = 0/1 */
+ u8 ExtLNA;
+ /* with external PA NO/Yes = 0/1 */
+ u8 ExtPA;
+ /* with external TRSW NO/Yes = 0/1 */
+ u8 ExtTRSW;
+ u8 PatchID; /* Customer ID */
+ bool bInHctTest;
+ bool bWIFITest;
+
+ bool bDualMacSmartConcurrent;
+ u32 BK_SupportAbility;
+ u8 AntDivType;
+/* HOOK BEFORE REG INIT----------- */
+
+ /* Dynamic Value */
+/* POINTER REFERENCE----------- */
+
+ u8 u8_temp;
+ bool bool_temp;
+ struct adapter *adapter_temp;
+
+ /* MAC PHY Mode SMSP/DMSP/DMDP = 0/1/2 */
+ u8 *pMacPhyMode;
+ /* TX Unicast byte count */
+ u64 *pNumTxBytesUnicast;
+ /* RX Unicast byte count */
+ u64 *pNumRxBytesUnicast;
+ /* Wireless mode B/G/A/N = BIT0/BIT1/BIT2/BIT3 */
+ u8 *pWirelessMode; /* ODM_WIRELESS_MODE_E */
+ /* Frequence band 2.4G/5G = 0/1 */
+ u8 *pBandType;
+ /* Secondary channel offset don't_care/below/above = 0/1/2 */
+ u8 *pSecChOffset;
+ /* Security mode Open/WEP/AES/TKIP = 0/1/2/3 */
+ u8 *pSecurity;
+ /* BW info 20M/40M/80M = 0/1/2 */
+ u8 *pBandWidth;
+ /* Central channel location Ch1/Ch2/.... */
+ u8 *pChannel; /* central channel number */
+ /* Common info for 92D DMSP */
+
+ bool *pbGetValueFromOtherMac;
+ struct adapter **pBuddyAdapter;
+ bool *pbMasterOfDMSP; /* MAC0: master, MAC1: slave */
+ /* Common info for Status */
+ bool *pbScanInProcess;
+ bool *pbPowerSaving;
+ /* CCA Path 2-path/path-A/path-B = 0/1/2; using ODM_CCA_PATH_E. */
+ u8 *pOnePathCCA;
+ /* pMgntInfo->AntennaTest */
+ u8 *pAntennaTest;
+ bool *pbNet_closed;
+/* POINTER REFERENCE----------- */
+ /* */
+/* CALL BY VALUE------------- */
+ bool bWIFI_Direct;
+ bool bWIFI_Display;
+ bool bLinked;
+ u8 RSSI_Min;
+ u8 InterfaceIndex; /* Add for 92D dual MAC: 0--Mac0 1--Mac1 */
+ bool bIsMPChip;
+ bool bOneEntryOnly;
+ /* Common info for BTDM */
+ bool bBtDisabled; /* BT is disabled */
+ bool bBtHsOperation; /* BT HS mode is under progress */
+ u8 btHsDigVal; /* use BT rssi to decide the DIG value */
+ bool bBtDisableEdcaTurbo;/* Under some condition, don't enable the
+ * EDCA Turbo */
+ bool bBtBusy; /* BT is busy. */
+/* CALL BY VALUE------------- */
+
+ /* 2 Define STA info. */
+ /* _ODM_STA_INFO */
+ /* For MP, we need to reduce one array pointer for default port.?? */
+ struct sta_info *pODM_StaInfo[ODM_ASSOCIATE_ENTRY_NUM];
+
+ u16 CurrminRptTime;
+ struct odm_ra_info RAInfo[ODM_ASSOCIATE_ENTRY_NUM]; /* Use MacID as
+ * array index. STA MacID=0,
+ * VWiFi Client MacID={1, ODM_ASSOCIATE_ENTRY_NUM-1} */
+ /* */
+ /* 2012/02/14 MH Add to share 88E ra with other SW team. */
+ /* We need to colelct all support abilit to a proper area. */
+ /* */
+ bool RaSupport88E;
+
+ /* Define ........... */
+
+ /* Latest packet phy info (ODM write) */
+ struct odm_phy_dbg_info PhyDbgInfo;
+
+ /* Latest packet phy info (ODM write) */
+ struct odm_mac_status_info *pMacInfo;
+
+ /* Different Team independt structure?? */
+
+ /* ODM Structure */
+ struct fast_ant_train DM_FatTable;
+ struct rtw_dig DM_DigTable;
+ struct rtl_ps DM_PSTable;
+ struct dyn_primary_cca DM_PriCCA;
+ struct rx_hpc DM_RXHP_Table;
+ struct false_alarm_stats FalseAlmCnt;
+ struct false_alarm_stats FlaseAlmCntBuddyAdapter;
+ struct sw_ant_switch DM_SWAT_Table;
+ bool RSSI_test;
+
+ struct edca_turbo DM_EDCA_Table;
+ u32 WMMEDCA_BE;
+ /* Copy from SD4 structure */
+ /* */
+ /* ================================================== */
+ /* */
+
+ bool *pbDriverStopped;
+ bool *pbDriverIsGoingToPnpSetPowerSleep;
+ bool *pinit_adpt_in_progress;
+
+ /* PSD */
+ bool bUserAssignLevel;
+ struct timer_list PSDTimer;
+ u8 RSSI_BT; /* come from BT */
+ bool bPSDinProcess;
+ bool bDMInitialGainEnable;
+
+ /* for rate adaptive, in fact, 88c/92c fw will handle this */
+ u8 bUseRAMask;
+
+ struct odm_rate_adapt RateAdaptive;
+
+ struct odm_rf_cal RFCalibrateInfo;
+
+ /* TX power tracking */
+ u8 BbSwingIdxOfdm;
+ u8 BbSwingIdxOfdmCurrent;
+ u8 BbSwingIdxOfdmBase;
+ bool BbSwingFlagOfdm;
+ u8 BbSwingIdxCck;
+ u8 BbSwingIdxCckCurrent;
+ u8 BbSwingIdxCckBase;
+ bool BbSwingFlagCck;
+ u8 *mp_mode;
+ /* ODM system resource. */
+
+ /* ODM relative time. */
+ struct timer_list PathDivSwitchTimer;
+ /* 2011.09.27 add for Path Diversity */
+ struct timer_list CCKPathDiversityTimer;
+ struct timer_list FastAntTrainingTimer;
+}; /* DM_Dynamic_Mechanism_Structure */
+
+enum ODM_RF_CONTENT {
+ odm_radioa_txt = 0x1000,
+ odm_radiob_txt = 0x1001,
+ odm_radioc_txt = 0x1002,
+ odm_radiod_txt = 0x1003
+};
+
+enum odm_bb_config_type {
+ CONFIG_BB_PHY_REG,
+ CONFIG_BB_AGC_TAB,
+ CONFIG_BB_AGC_TAB_2G,
+ CONFIG_BB_AGC_TAB_5G,
+ CONFIG_BB_PHY_REG_PG,
+};
+
+/* Status code */
+enum rt_status {
+ RT_STATUS_SUCCESS,
+ RT_STATUS_FAILURE,
+ RT_STATUS_PENDING,
+ RT_STATUS_RESOURCE,
+ RT_STATUS_INVALID_CONTEXT,
+ RT_STATUS_INVALID_PARAMETER,
+ RT_STATUS_NOT_SUPPORT,
+ RT_STATUS_OS_API_FAILED,
+};
+
+/* 3=========================================================== */
+/* 3 DIG */
+/* 3=========================================================== */
+
+enum dm_dig_op {
+ RT_TYPE_THRESH_HIGH = 0,
+ RT_TYPE_THRESH_LOW = 1,
+ RT_TYPE_BACKOFF = 2,
+ RT_TYPE_RX_GAIN_MIN = 3,
+ RT_TYPE_RX_GAIN_MAX = 4,
+ RT_TYPE_ENABLE = 5,
+ RT_TYPE_DISABLE = 6,
+ DIG_OP_TYPE_MAX
+};
+
+#define DM_DIG_THRESH_HIGH 40
+#define DM_DIG_THRESH_LOW 35
+
+#define DM_SCAN_RSSI_TH 0x14 /* scan return issue for LC */
+
+#define DM_false_ALARM_THRESH_LOW 400
+#define DM_false_ALARM_THRESH_HIGH 1000
+
+#define DM_DIG_MAX_NIC 0x4e
+#define DM_DIG_MIN_NIC 0x1e /* 0x22/0x1c */
+
+#define DM_DIG_MAX_AP 0x32
+#define DM_DIG_MIN_AP 0x20
+
+#define DM_DIG_MAX_NIC_HP 0x46
+#define DM_DIG_MIN_NIC_HP 0x2e
+
+#define DM_DIG_MAX_AP_HP 0x42
+#define DM_DIG_MIN_AP_HP 0x30
+
+/* vivi 92c&92d has different definition, 20110504 */
+/* this is for 92c */
+#define DM_DIG_FA_TH0 0x200/* 0x20 */
+#define DM_DIG_FA_TH1 0x300/* 0x100 */
+#define DM_DIG_FA_TH2 0x400/* 0x200 */
+/* this is for 92d */
+#define DM_DIG_FA_TH0_92D 0x100
+#define DM_DIG_FA_TH1_92D 0x400
+#define DM_DIG_FA_TH2_92D 0x600
+
+#define DM_DIG_BACKOFF_MAX 12
+#define DM_DIG_BACKOFF_MIN -4
+#define DM_DIG_BACKOFF_DEFAULT 10
+
+/* 3=========================================================== */
+/* 3 AGC RX High Power Mode */
+/* 3=========================================================== */
+#define LNA_Low_Gain_1 0x64
+#define LNA_Low_Gain_2 0x5A
+#define LNA_Low_Gain_3 0x58
+
+#define FA_RXHP_TH1 5000
+#define FA_RXHP_TH2 1500
+#define FA_RXHP_TH3 800
+#define FA_RXHP_TH4 600
+#define FA_RXHP_TH5 500
+
+/* 3=========================================================== */
+/* 3 EDCA */
+/* 3=========================================================== */
+
+/* 3=========================================================== */
+/* 3 Dynamic Tx Power */
+/* 3=========================================================== */
+/* Dynamic Tx Power Control Threshold */
+#define TX_POWER_NEAR_FIELD_THRESH_LVL2 74
+#define TX_POWER_NEAR_FIELD_THRESH_LVL1 67
+#define TX_POWER_NEAR_FIELD_THRESH_AP 0x3F
+
+#define TxHighPwrLevel_Normal 0
+#define TxHighPwrLevel_Level1 1
+#define TxHighPwrLevel_Level2 2
+#define TxHighPwrLevel_BT1 3
+#define TxHighPwrLevel_BT2 4
+#define TxHighPwrLevel_15 5
+#define TxHighPwrLevel_35 6
+#define TxHighPwrLevel_50 7
+#define TxHighPwrLevel_70 8
+#define TxHighPwrLevel_100 9
+
+/* 3=========================================================== */
+/* 3 Rate Adaptive */
+/* 3=========================================================== */
+#define DM_RATR_STA_INIT 0
+#define DM_RATR_STA_HIGH 1
+#define DM_RATR_STA_MIDDLE 2
+#define DM_RATR_STA_LOW 3
+
+/* 3=========================================================== */
+/* 3 BB Power Save */
+/* 3=========================================================== */
+
+enum dm_1r_cca {
+ CCA_1R = 0,
+ CCA_2R = 1,
+ CCA_MAX = 2,
+};
+
+enum dm_rf {
+ RF_Save = 0,
+ RF_Normal = 1,
+ RF_MAX = 2,
+};
+
+/* 3=========================================================== */
+/* 3 Antenna Diversity */
+/* 3=========================================================== */
+enum dm_swas {
+ Antenna_A = 1,
+ Antenna_B = 2,
+ Antenna_MAX = 3,
+};
+
+/* Maximal number of antenna detection mechanism needs to perform. */
+#define MAX_ANTENNA_DETECTION_CNT 10
+
+/* Extern Global Variables. */
+#define OFDM_TABLE_SIZE_92C 37
+#define OFDM_TABLE_SIZE_92D 43
+#define CCK_TABLE_SIZE 33
+
+extern u32 OFDMSwingTable[OFDM_TABLE_SIZE_92D];
+extern u8 CCKSwingTable_Ch1_Ch13[CCK_TABLE_SIZE][8];
+extern u8 CCKSwingTable_Ch14 [CCK_TABLE_SIZE][8];
+
+/* check Sta pointer valid or not */
+#define IS_STA_VALID(pSta) (pSta)
+/* 20100514 Joseph: Add definition for antenna switching test after link. */
+/* This indicates two different the steps. */
+/* In SWAW_STEP_PEAK, driver needs to switch antenna and listen to the
+ * signal on the air. */
+/* In SWAW_STEP_DETERMINE, driver just compares the signal captured in
+ * SWAW_STEP_PEAK */
+/* with original RSSI to determine if it is necessary to switch antenna. */
+#define SWAW_STEP_PEAK 0
+#define SWAW_STEP_DETERMINE 1
+
+void ODM_Write_DIG(struct odm_dm_struct *pDM_Odm, u8 CurrentIGI);
+void ODM_Write_CCK_CCA_Thres(struct odm_dm_struct *pDM_Odm, u8 CurCCK_CCAThres);
+
+void ODM_SetAntenna(struct odm_dm_struct *pDM_Odm, u8 Antenna);
+
+#define dm_RF_Saving ODM_RF_Saving
+void ODM_RF_Saving(struct odm_dm_struct *pDM_Odm, u8 bForceInNormal);
+
+#define SwAntDivRestAfterLink ODM_SwAntDivRestAfterLink
+void ODM_SwAntDivRestAfterLink(struct odm_dm_struct *pDM_Odm);
+
+#define dm_CheckTXPowerTracking ODM_TXPowerTrackingCheck
+void ODM_TXPowerTrackingCheck(struct odm_dm_struct *pDM_Odm);
+
+bool ODM_RAStateCheck(struct odm_dm_struct *pDM_Odm, s32 RSSI,
+ bool bForceUpdate, u8 *pRATRState);
+
+#define dm_SWAW_RSSI_Check ODM_SwAntDivChkPerPktRssi
+void ODM_SwAntDivChkPerPktRssi(struct odm_dm_struct *pDM_Odm, u8 StationID,
+ struct odm_phy_status_info *pPhyInfo);
+
+u32 ConvertTo_dB(u32 Value);
+
+u32 GetPSDData(struct odm_dm_struct *pDM_Odm, unsigned int point,
+ u8 initial_gain_psd);
+
+void odm_DIGbyRSSI_LPS(struct odm_dm_struct *pDM_Odm);
+
+u32 ODM_Get_Rate_Bitmap(struct odm_dm_struct *pDM_Odm, u32 macid,
+ u32 ra_mask, u8 rssi_level);
+
+void ODM_DMInit(struct odm_dm_struct *pDM_Odm);
+
+void ODM_DMWatchdog(struct odm_dm_struct *pDM_Odm);
+
+void ODM_CmnInfoInit(struct odm_dm_struct *pDM_Odm,
+ enum odm_common_info_def CmnInfo, u32 Value);
+
+void ODM_CmnInfoHook(struct odm_dm_struct *pDM_Odm,
+ enum odm_common_info_def CmnInfo, void *pValue);
+
+void ODM_CmnInfoPtrArrayHook(struct odm_dm_struct *pDM_Odm,
+ enum odm_common_info_def CmnInfo,
+ u16 Index, void *pValue);
+
+void ODM_CmnInfoUpdate(struct odm_dm_struct *pDM_Odm, u32 CmnInfo, u64 Value);
+
+void ODM_InitAllTimers(struct odm_dm_struct *pDM_Odm);
+
+void ODM_CancelAllTimers(struct odm_dm_struct *pDM_Odm);
+
+void ODM_ReleaseAllTimers(struct odm_dm_struct *pDM_Odm);
+
+void ODM_ResetIQKResult(struct odm_dm_struct *pDM_Odm);
+
+void ODM_AntselStatistics_88C(struct odm_dm_struct *pDM_Odm, u8 MacId,
+ u32 PWDBAll, bool isCCKrate);
+
+void ODM_SingleDualAntennaDefaultSetting(struct odm_dm_struct *pDM_Odm);
+
+bool ODM_SingleDualAntennaDetection(struct odm_dm_struct *pDM_Odm, u8 mode);
+
+void odm_dtc(struct odm_dm_struct *pDM_Odm);
+
+#endif
diff --git a/drivers/staging/r8188eu/include/odm_HWConfig.h b/drivers/staging/r8188eu/include/odm_HWConfig.h
new file mode 100644
index 000000000000..80f549f196e2
--- /dev/null
+++ b/drivers/staging/r8188eu/include/odm_HWConfig.h
@@ -0,0 +1,133 @@
+/******************************************************************************
+ *
+ * Copyright(c) 2007 - 2011 Realtek Corporation. All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of version 2 of the GNU General Public License as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
+ * more details.
+ *
+ * You should have received a copy of the GNU General Public License along with
+ * this program; if not, write to the Free Software Foundation, Inc.,
+ * 51 Franklin Street, Fifth Floor, Boston, MA 02110, USA
+ *
+ *
+ ******************************************************************************/
+
+#ifndef __HALHWOUTSRC_H__
+#define __HALHWOUTSRC_H__
+
+/* Definition */
+/* CCK Rates, TxHT = 0 */
+#define DESC92C_RATE1M 0x00
+#define DESC92C_RATE2M 0x01
+#define DESC92C_RATE5_5M 0x02
+#define DESC92C_RATE11M 0x03
+
+/* OFDM Rates, TxHT = 0 */
+#define DESC92C_RATE6M 0x04
+#define DESC92C_RATE9M 0x05
+#define DESC92C_RATE12M 0x06
+#define DESC92C_RATE18M 0x07
+#define DESC92C_RATE24M 0x08
+#define DESC92C_RATE36M 0x09
+#define DESC92C_RATE48M 0x0a
+#define DESC92C_RATE54M 0x0b
+
+/* MCS Rates, TxHT = 1 */
+#define DESC92C_RATEMCS0 0x0c
+#define DESC92C_RATEMCS1 0x0d
+#define DESC92C_RATEMCS2 0x0e
+#define DESC92C_RATEMCS3 0x0f
+#define DESC92C_RATEMCS4 0x10
+#define DESC92C_RATEMCS5 0x11
+#define DESC92C_RATEMCS6 0x12
+#define DESC92C_RATEMCS7 0x13
+#define DESC92C_RATEMCS8 0x14
+#define DESC92C_RATEMCS9 0x15
+#define DESC92C_RATEMCS10 0x16
+#define DESC92C_RATEMCS11 0x17
+#define DESC92C_RATEMCS12 0x18
+#define DESC92C_RATEMCS13 0x19
+#define DESC92C_RATEMCS14 0x1a
+#define DESC92C_RATEMCS15 0x1b
+#define DESC92C_RATEMCS15_SG 0x1c
+#define DESC92C_RATEMCS32 0x20
+
+/* structure and define */
+
+struct phy_rx_agc_info {
+ #ifdef __LITTLE_ENDIAN
+ u8 gain:7, trsw:1;
+ #else
+ u8 trsw:1, gain:7;
+ #endif
+};
+
+struct phy_status_rpt {
+ struct phy_rx_agc_info path_agc[3];
+ u8 ch_corr[2];
+ u8 cck_sig_qual_ofdm_pwdb_all;
+ u8 cck_agc_rpt_ofdm_cfosho_a;
+ u8 cck_rpt_b_ofdm_cfosho_b;
+ u8 rsvd_1;/* ch_corr_msb; */
+ u8 noise_power_db_msb;
+ u8 path_cfotail[2];
+ u8 pcts_mask[2];
+ s8 stream_rxevm[2];
+ u8 path_rxsnr[3];
+ u8 noise_power_db_lsb;
+ u8 rsvd_2[3];
+ u8 stream_csi[2];
+ u8 stream_target_csi[2];
+ s8 sig_evm;
+ u8 rsvd_3;
+
+#ifdef __LITTLE_ENDIAN
+ u8 antsel_rx_keep_2:1; /* ex_intf_flg:1; */
+ u8 sgi_en:1;
+ u8 rxsc:2;
+ u8 idle_long:1;
+ u8 r_ant_train_en:1;
+ u8 ant_sel_b:1;
+ u8 ant_sel:1;
+#else /* _BIG_ENDIAN_ */
+ u8 ant_sel:1;
+ u8 ant_sel_b:1;
+ u8 r_ant_train_en:1;
+ u8 idle_long:1;
+ u8 rxsc:2;
+ u8 sgi_en:1;
+ u8 antsel_rx_keep_2:1; /* ex_intf_flg:1; */
+#endif
+};
+
+void odm_Init_RSSIForDM(struct odm_dm_struct *pDM_Odm);
+
+void ODM_PhyStatusQuery(struct odm_dm_struct *pDM_Odm,
+ struct odm_phy_status_info *pPhyInfo,
+ u8 *pPhyStatus,
+ struct odm_per_pkt_info *pPktinfo,
+ struct adapter *adapt);
+
+void ODM_MacStatusQuery(struct odm_dm_struct *pDM_Odm,
+ u8 *pMacStatus,
+ u8 MacID,
+ bool bPacketMatchBSSID,
+ bool bPacketToSelf,
+ bool bPacketBeacon);
+
+enum HAL_STATUS ODM_ConfigRFWithHeaderFile(struct odm_dm_struct *pDM_Odm,
+ enum rf_radio_path Content,
+ enum rf_radio_path eRFPath);
+
+enum HAL_STATUS ODM_ConfigBBWithHeaderFile(struct odm_dm_struct *pDM_Odm,
+ enum odm_bb_config_type ConfigType);
+
+enum HAL_STATUS ODM_ConfigMACWithHeaderFile(struct odm_dm_struct *pDM_Odm);
+
+#endif
diff --git a/drivers/staging/r8188eu/include/odm_RTL8188E.h b/drivers/staging/r8188eu/include/odm_RTL8188E.h
new file mode 100644
index 000000000000..f96ad5af4bd5
--- /dev/null
+++ b/drivers/staging/r8188eu/include/odm_RTL8188E.h
@@ -0,0 +1,56 @@
+/******************************************************************************
+ *
+ * Copyright(c) 2007 - 2011 Realtek Corporation. All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of version 2 of the GNU General Public License as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
+ * more details.
+ *
+ * You should have received a copy of the GNU General Public License along with
+ * this program; if not, write to the Free Software Foundation, Inc.,
+ * 51 Franklin Street, Fifth Floor, Boston, MA 02110, USA
+ *
+ *
+ ******************************************************************************/
+#ifndef __ODM_RTL8188E_H__
+#define __ODM_RTL8188E_H__
+
+#define MAIN_ANT 0
+#define AUX_ANT 1
+#define MAIN_ANT_CG_TRX 1
+#define AUX_ANT_CG_TRX 0
+#define MAIN_ANT_CGCS_RX 0
+#define AUX_ANT_CGCS_RX 1
+
+void ODM_DIG_LowerBound_88E(struct odm_dm_struct *pDM_Odm);
+
+void ODM_AntennaDiversityInit_88E(struct odm_dm_struct *pDM_Odm);
+
+void ODM_AntennaDiversity_88E(struct odm_dm_struct *pDM_Odm);
+
+void ODM_SetTxAntByTxInfo_88E(struct odm_dm_struct *pDM_Odm, u8 *pDesc,
+ u8 macId);
+
+void ODM_UpdateRxIdleAnt_88E(struct odm_dm_struct *pDM_Odm, u8 Ant);
+
+void ODM_AntselStatistics_88E(struct odm_dm_struct *pDM_Odm, u8 antsel_tr_mux,
+ u32 MacId, u8 RxPWDBAll);
+
+void odm_FastAntTraining(struct odm_dm_struct *pDM_Odm);
+
+void odm_FastAntTrainingCallback(struct odm_dm_struct *pDM_Odm);
+
+void odm_FastAntTrainingWorkItemCallback(struct odm_dm_struct *pDM_Odm);
+
+void odm_PrimaryCCA_Init(struct odm_dm_struct *pDM_Odm);
+
+bool ODM_DynamicPrimaryCCA_DupRTS(struct odm_dm_struct *pDM_Odm);
+
+void odm_DynamicPrimaryCCA(struct odm_dm_struct *pDM_Odm);
+
+#endif
diff --git a/drivers/staging/r8188eu/include/odm_RegConfig8188E.h b/drivers/staging/r8188eu/include/odm_RegConfig8188E.h
new file mode 100644
index 000000000000..f2bf7a0d9867
--- /dev/null
+++ b/drivers/staging/r8188eu/include/odm_RegConfig8188E.h
@@ -0,0 +1,43 @@
+/******************************************************************************
+ *
+ * Copyright(c) 2007 - 2011 Realtek Corporation. All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of version 2 of the GNU General Public License as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
+ * more details.
+ *
+ * You should have received a copy of the GNU General Public License along with
+ * this program; if not, write to the Free Software Foundation, Inc.,
+ * 51 Franklin Street, Fifth Floor, Boston, MA 02110, USA
+ *
+ *
+ ******************************************************************************/
+#ifndef __INC_ODM_REGCONFIG_H_8188E
+#define __INC_ODM_REGCONFIG_H_8188E
+
+void odm_ConfigRFReg_8188E(struct odm_dm_struct *pDM_Odm, u32 Addr, u32 Data,
+ enum rf_radio_path RF_PATH, u32 RegAddr);
+
+void odm_ConfigRF_RadioA_8188E(struct odm_dm_struct *pDM_Odm,
+ u32 Addr, u32 Data);
+
+void odm_ConfigRF_RadioB_8188E(struct odm_dm_struct *pDM_Odm,
+ u32 Addr, u32 Data);
+
+void odm_ConfigMAC_8188E(struct odm_dm_struct *pDM_Odm, u32 Addr, u8 Data);
+
+void odm_ConfigBB_AGC_8188E(struct odm_dm_struct *pDM_Odm, u32 Addr,
+ u32 Bitmask, u32 Data);
+
+void odm_ConfigBB_PHY_REG_PG_8188E(struct odm_dm_struct *pDM_Odm, u32 Addr,
+ u32 Bitmask, u32 Data);
+
+void odm_ConfigBB_PHY_8188E(struct odm_dm_struct *pDM_Odm, u32 Addr,
+ u32 Bitmask, u32 Data);
+
+#endif
diff --git a/drivers/staging/r8188eu/include/odm_RegDefine11AC.h b/drivers/staging/r8188eu/include/odm_RegDefine11AC.h
new file mode 100644
index 000000000000..01425f36634c
--- /dev/null
+++ b/drivers/staging/r8188eu/include/odm_RegDefine11AC.h
@@ -0,0 +1,46 @@
+/******************************************************************************
+ *
+ * Copyright(c) 2007 - 2011 Realtek Corporation. All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of version 2 of the GNU General Public License as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
+ * more details.
+ *
+ * You should have received a copy of the GNU General Public License along with
+ * this program; if not, write to the Free Software Foundation, Inc.,
+ * 51 Franklin Street, Fifth Floor, Boston, MA 02110, USA
+ *
+ *
+ ******************************************************************************/
+
+#ifndef __ODM_REGDEFINE11AC_H__
+#define __ODM_REGDEFINE11AC_H__
+
+/* 2 RF REG LIST */
+
+/* 2 BB REG LIST */
+/* PAGE 8 */
+/* PAGE 9 */
+#define ODM_REG_OFDM_FA_RST_11AC 0x9A4
+/* PAGE A */
+#define ODM_REG_CCK_CCA_11AC 0xA0A
+#define ODM_REG_CCK_FA_RST_11AC 0xA2C
+#define ODM_REG_CCK_FA_11AC 0xA5C
+/* PAGE C */
+#define ODM_REG_IGI_A_11AC 0xC50
+/* PAGE E */
+#define ODM_REG_IGI_B_11AC 0xE50
+/* PAGE F */
+#define ODM_REG_OFDM_FA_11AC 0xF48
+
+/* 2 MAC REG LIST */
+
+/* DIG Related */
+#define ODM_BIT_IGI_11AC 0xFFFFFFFF
+
+#endif
diff --git a/drivers/staging/r8188eu/include/odm_RegDefine11N.h b/drivers/staging/r8188eu/include/odm_RegDefine11N.h
new file mode 100644
index 000000000000..2b888dee3dd5
--- /dev/null
+++ b/drivers/staging/r8188eu/include/odm_RegDefine11N.h
@@ -0,0 +1,160 @@
+/******************************************************************************
+ *
+ * Copyright(c) 2007 - 2011 Realtek Corporation. All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of version 2 of the GNU General Public License as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
+ * more details.
+ *
+ * You should have received a copy of the GNU General Public License along with
+ * this program; if not, write to the Free Software Foundation, Inc.,
+ * 51 Franklin Street, Fifth Floor, Boston, MA 02110, USA
+ *
+ *
+ ******************************************************************************/
+
+#ifndef __ODM_REGDEFINE11N_H__
+#define __ODM_REGDEFINE11N_H__
+
+/* 2 RF REG LIST */
+#define ODM_REG_RF_MODE_11N 0x00
+#define ODM_REG_RF_0B_11N 0x0B
+#define ODM_REG_CHNBW_11N 0x18
+#define ODM_REG_T_METER_11N 0x24
+#define ODM_REG_RF_25_11N 0x25
+#define ODM_REG_RF_26_11N 0x26
+#define ODM_REG_RF_27_11N 0x27
+#define ODM_REG_RF_2B_11N 0x2B
+#define ODM_REG_RF_2C_11N 0x2C
+#define ODM_REG_RXRF_A3_11N 0x3C
+#define ODM_REG_T_METER_92D_11N 0x42
+#define ODM_REG_T_METER_88E_11N 0x42
+
+/* 2 BB REG LIST */
+/* PAGE 8 */
+#define ODM_REG_BB_CTRL_11N 0x800
+#define ODM_REG_RF_PIN_11N 0x804
+#define ODM_REG_PSD_CTRL_11N 0x808
+#define ODM_REG_TX_ANT_CTRL_11N 0x80C
+#define ODM_REG_BB_PWR_SAV5_11N 0x818
+#define ODM_REG_CCK_RPT_FORMAT_11N 0x824
+#define ODM_REG_RX_DEFUALT_A_11N 0x858
+#define ODM_REG_RX_DEFUALT_B_11N 0x85A
+#define ODM_REG_BB_PWR_SAV3_11N 0x85C
+#define ODM_REG_ANTSEL_CTRL_11N 0x860
+#define ODM_REG_RX_ANT_CTRL_11N 0x864
+#define ODM_REG_PIN_CTRL_11N 0x870
+#define ODM_REG_BB_PWR_SAV1_11N 0x874
+#define ODM_REG_ANTSEL_PATH_11N 0x878
+#define ODM_REG_BB_3WIRE_11N 0x88C
+#define ODM_REG_SC_CNT_11N 0x8C4
+#define ODM_REG_PSD_DATA_11N 0x8B4
+/* PAGE 9 */
+#define ODM_REG_ANT_MAPPING1_11N 0x914
+#define ODM_REG_ANT_MAPPING2_11N 0x918
+/* PAGE A */
+#define ODM_REG_CCK_ANTDIV_PARA1_11N 0xA00
+#define ODM_REG_CCK_CCA_11N 0xA0A
+#define ODM_REG_CCK_ANTDIV_PARA2_11N 0xA0C
+#define ODM_REG_CCK_ANTDIV_PARA3_11N 0xA10
+#define ODM_REG_CCK_ANTDIV_PARA4_11N 0xA14
+#define ODM_REG_CCK_FILTER_PARA1_11N 0xA22
+#define ODM_REG_CCK_FILTER_PARA2_11N 0xA23
+#define ODM_REG_CCK_FILTER_PARA3_11N 0xA24
+#define ODM_REG_CCK_FILTER_PARA4_11N 0xA25
+#define ODM_REG_CCK_FILTER_PARA5_11N 0xA26
+#define ODM_REG_CCK_FILTER_PARA6_11N 0xA27
+#define ODM_REG_CCK_FILTER_PARA7_11N 0xA28
+#define ODM_REG_CCK_FILTER_PARA8_11N 0xA29
+#define ODM_REG_CCK_FA_RST_11N 0xA2C
+#define ODM_REG_CCK_FA_MSB_11N 0xA58
+#define ODM_REG_CCK_FA_LSB_11N 0xA5C
+#define ODM_REG_CCK_CCA_CNT_11N 0xA60
+#define ODM_REG_BB_PWR_SAV4_11N 0xA74
+/* PAGE B */
+#define ODM_REG_LNA_SWITCH_11N 0xB2C
+#define ODM_REG_PATH_SWITCH_11N 0xB30
+#define ODM_REG_RSSI_CTRL_11N 0xB38
+#define ODM_REG_CONFIG_ANTA_11N 0xB68
+#define ODM_REG_RSSI_BT_11N 0xB9C
+/* PAGE C */
+#define ODM_REG_OFDM_FA_HOLDC_11N 0xC00
+#define ODM_REG_RX_PATH_11N 0xC04
+#define ODM_REG_TRMUX_11N 0xC08
+#define ODM_REG_OFDM_FA_RSTC_11N 0xC0C
+#define ODM_REG_RXIQI_MATRIX_11N 0xC14
+#define ODM_REG_TXIQK_MATRIX_LSB1_11N 0xC4C
+#define ODM_REG_IGI_A_11N 0xC50
+#define ODM_REG_ANTDIV_PARA2_11N 0xC54
+#define ODM_REG_IGI_B_11N 0xC58
+#define ODM_REG_ANTDIV_PARA3_11N 0xC5C
+#define ODM_REG_BB_PWR_SAV2_11N 0xC70
+#define ODM_REG_RX_OFF_11N 0xC7C
+#define ODM_REG_TXIQK_MATRIXA_11N 0xC80
+#define ODM_REG_TXIQK_MATRIXB_11N 0xC88
+#define ODM_REG_TXIQK_MATRIXA_LSB2_11N 0xC94
+#define ODM_REG_TXIQK_MATRIXB_LSB2_11N 0xC9C
+#define ODM_REG_RXIQK_MATRIX_LSB_11N 0xCA0
+#define ODM_REG_ANTDIV_PARA1_11N 0xCA4
+#define ODM_REG_OFDM_FA_TYPE1_11N 0xCF0
+/* PAGE D */
+#define ODM_REG_OFDM_FA_RSTD_11N 0xD00
+#define ODM_REG_OFDM_FA_TYPE2_11N 0xDA0
+#define ODM_REG_OFDM_FA_TYPE3_11N 0xDA4
+#define ODM_REG_OFDM_FA_TYPE4_11N 0xDA8
+/* PAGE E */
+#define ODM_REG_TXAGC_A_6_18_11N 0xE00
+#define ODM_REG_TXAGC_A_24_54_11N 0xE04
+#define ODM_REG_TXAGC_A_1_MCS32_11N 0xE08
+#define ODM_REG_TXAGC_A_MCS0_3_11N 0xE10
+#define ODM_REG_TXAGC_A_MCS4_7_11N 0xE14
+#define ODM_REG_TXAGC_A_MCS8_11_11N 0xE18
+#define ODM_REG_TXAGC_A_MCS12_15_11N 0xE1C
+#define ODM_REG_FPGA0_IQK_11N 0xE28
+#define ODM_REG_TXIQK_TONE_A_11N 0xE30
+#define ODM_REG_RXIQK_TONE_A_11N 0xE34
+#define ODM_REG_TXIQK_PI_A_11N 0xE38
+#define ODM_REG_RXIQK_PI_A_11N 0xE3C
+#define ODM_REG_TXIQK_11N 0xE40
+#define ODM_REG_RXIQK_11N 0xE44
+#define ODM_REG_IQK_AGC_PTS_11N 0xE48
+#define ODM_REG_IQK_AGC_RSP_11N 0xE4C
+#define ODM_REG_BLUETOOTH_11N 0xE6C
+#define ODM_REG_RX_WAIT_CCA_11N 0xE70
+#define ODM_REG_TX_CCK_RFON_11N 0xE74
+#define ODM_REG_TX_CCK_BBON_11N 0xE78
+#define ODM_REG_OFDM_RFON_11N 0xE7C
+#define ODM_REG_OFDM_BBON_11N 0xE80
+#define ODM_REG_TX2RX_11N 0xE84
+#define ODM_REG_TX2TX_11N 0xE88
+#define ODM_REG_RX_CCK_11N 0xE8C
+#define ODM_REG_RX_OFDM_11N 0xED0
+#define ODM_REG_RX_WAIT_RIFS_11N 0xED4
+#define ODM_REG_RX2RX_11N 0xED8
+#define ODM_REG_STANDBY_11N 0xEDC
+#define ODM_REG_SLEEP_11N 0xEE0
+#define ODM_REG_PMPD_ANAEN_11N 0xEEC
+
+/* 2 MAC REG LIST */
+#define ODM_REG_BB_RST_11N 0x02
+#define ODM_REG_ANTSEL_PIN_11N 0x4C
+#define ODM_REG_EARLY_MODE_11N 0x4D0
+#define ODM_REG_RSSI_MONITOR_11N 0x4FE
+#define ODM_REG_EDCA_VO_11N 0x500
+#define ODM_REG_EDCA_VI_11N 0x504
+#define ODM_REG_EDCA_BE_11N 0x508
+#define ODM_REG_EDCA_BK_11N 0x50C
+#define ODM_REG_TXPAUSE_11N 0x522
+#define ODM_REG_RESP_TX_11N 0x6D8
+#define ODM_REG_ANT_TRAIN_PARA1_11N 0x7b0
+#define ODM_REG_ANT_TRAIN_PARA2_11N 0x7b4
+
+/* DIG Related */
+#define ODM_BIT_IGI_11N 0x0000007F
+
+#endif
diff --git a/drivers/staging/r8188eu/include/odm_debug.h b/drivers/staging/r8188eu/include/odm_debug.h
new file mode 100644
index 000000000000..5e58b603d6ac
--- /dev/null
+++ b/drivers/staging/r8188eu/include/odm_debug.h
@@ -0,0 +1,143 @@
+/******************************************************************************
+ *
+ * Copyright(c) 2007 - 2011 Realtek Corporation. All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of version 2 of the GNU General Public License as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
+ * more details.
+ *
+ * You should have received a copy of the GNU General Public License along with
+ * this program; if not, write to the Free Software Foundation, Inc.,
+ * 51 Franklin Street, Fifth Floor, Boston, MA 02110, USA
+ *
+ *
+ ******************************************************************************/
+
+#ifndef __ODM_DBG_H__
+#define __ODM_DBG_H__
+
+/* */
+/* Define the debug levels */
+/* */
+/* 1. DBG_TRACE and DBG_LOUD are used for normal cases. */
+/* They can help SW engineer to develop or trace states changed */
+/* and also help HW enginner to trace every operation to and from HW, */
+/* e.g IO, Tx, Rx. */
+/* */
+/* 2. DBG_WARNNING and DBG_SERIOUS are used for unusual or error cases, */
+/* which help us to debug SW or HW. */
+
+/* Never used in a call to ODM_RT_TRACE()! */
+#define ODM_DBG_OFF 1
+
+/* Fatal bug. */
+/* For example, Tx/Rx/IO locked up, OS hangs, memory access violation, */
+/* resource allocation failed, unexpected HW behavior, HW BUG and so on. */
+#define ODM_DBG_SERIOUS 2
+
+/* Abnormal, rare, or unexpeted cases. */
+/* For example, IRP/Packet/OID canceled, device suprisely unremoved and so on. */
+#define ODM_DBG_WARNING 3
+
+/* Normal case with useful information about current SW or HW state. */
+/* For example, Tx/Rx descriptor to fill, Tx/Rx descr. completed status, */
+/* SW protocol state change, dynamic mechanism state change and so on. */
+/* */
+#define ODM_DBG_LOUD 4
+
+/* Normal case with detail execution flow or information. */
+#define ODM_DBG_TRACE 5
+
+/* Define the tracing components */
+/* BB Functions */
+#define ODM_COMP_DIG BIT0
+#define ODM_COMP_RA_MASK BIT1
+#define ODM_COMP_DYNAMIC_TXPWR BIT2
+#define ODM_COMP_FA_CNT BIT3
+#define ODM_COMP_RSSI_MONITOR BIT4
+#define ODM_COMP_CCK_PD BIT5
+#define ODM_COMP_ANT_DIV BIT6
+#define ODM_COMP_PWR_SAVE BIT7
+#define ODM_COMP_PWR_TRA BIT8
+#define ODM_COMP_RATE_ADAPTIVE BIT9
+#define ODM_COMP_PATH_DIV BIT10
+#define ODM_COMP_PSD BIT11
+#define ODM_COMP_DYNAMIC_PRICCA BIT12
+#define ODM_COMP_RXHP BIT13
+/* MAC Functions */
+#define ODM_COMP_EDCA_TURBO BIT16
+#define ODM_COMP_EARLY_MODE BIT17
+/* RF Functions */
+#define ODM_COMP_TX_PWR_TRACK BIT24
+#define ODM_COMP_RX_GAIN_TRACK BIT25
+#define ODM_COMP_CALIBRATION BIT26
+/* Common Functions */
+#define ODM_COMP_COMMON BIT30
+#define ODM_COMP_INIT BIT31
+
+/*------------------------Export Marco Definition---------------------------*/
+#define DbgPrint pr_info
+#define RT_PRINTK(fmt, args...) \
+ DbgPrint( "%s(): " fmt, __func__, ## args);
+
+#ifndef ASSERT
+ #define ASSERT(expr)
+#endif
+
+#define ODM_RT_TRACE(pDM_Odm, comp, level, fmt) \
+ if (((comp) & pDM_Odm->DebugComponents) && \
+ (level <= pDM_Odm->DebugLevel)) { \
+ if (pDM_Odm->SupportICType == ODM_RTL8192C) \
+ DbgPrint("[ODM-92C] "); \
+ else if (pDM_Odm->SupportICType == ODM_RTL8192D) \
+ DbgPrint("[ODM-92D] "); \
+ else if (pDM_Odm->SupportICType == ODM_RTL8723A) \
+ DbgPrint("[ODM-8723A] "); \
+ else if (pDM_Odm->SupportICType == ODM_RTL8188E) \
+ DbgPrint("[ODM-8188E] "); \
+ else if (pDM_Odm->SupportICType == ODM_RTL8812) \
+ DbgPrint("[ODM-8812] "); \
+ else if (pDM_Odm->SupportICType == ODM_RTL8821) \
+ DbgPrint("[ODM-8821] "); \
+ RT_PRINTK fmt; \
+ }
+
+#define ODM_RT_TRACE_F(pDM_Odm, comp, level, fmt) \
+ if (((comp) & pDM_Odm->DebugComponents) && \
+ (level <= pDM_Odm->DebugLevel)) { \
+ RT_PRINTK fmt; \
+ }
+
+#define ODM_RT_ASSERT(pDM_Odm, expr, fmt) \
+ if (!(expr)) { \
+ DbgPrint( "Assertion failed! %s at ......\n", #expr); \
+ DbgPrint( " ......%s,%s,line=%d\n", __FILE__, \
+ __func__, __LINE__); \
+ RT_PRINTK fmt; \
+ ASSERT(false); \
+ }
+#define ODM_dbg_enter() { DbgPrint("==> %s\n", __func__); }
+#define ODM_dbg_exit() { DbgPrint("<== %s\n", __func__); }
+#define ODM_dbg_trace(str) { DbgPrint("%s:%s\n", __func__, str); }
+
+#define ODM_PRINT_ADDR(pDM_Odm, comp, level, title_str, ptr) \
+ if (((comp) & pDM_Odm->DebugComponents) && \
+ (level <= pDM_Odm->DebugLevel)) { \
+ int __i; \
+ u8 *__ptr = (u8 *)ptr; \
+ DbgPrint("[ODM] "); \
+ DbgPrint(title_str); \
+ DbgPrint(" "); \
+ for (__i = 0; __i < 6; __i++) \
+ DbgPrint("%02X%s", __ptr[__i], (__i==5)?"":"-");\
+ DbgPrint("\n"); \
+ }
+
+void ODM_InitDebugSetting(struct odm_dm_struct *pDM_Odm);
+
+#endif /* __ODM_DBG_H__ */
diff --git a/drivers/staging/r8188eu/include/odm_interface.h b/drivers/staging/r8188eu/include/odm_interface.h
new file mode 100644
index 000000000000..0abfa6febb7e
--- /dev/null
+++ b/drivers/staging/r8188eu/include/odm_interface.h
@@ -0,0 +1,164 @@
+/******************************************************************************
+ *
+ * Copyright(c) 2007 - 2011 Realtek Corporation. All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of version 2 of the GNU General Public License as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
+ * more details.
+ *
+ * You should have received a copy of the GNU General Public License along with
+ * this program; if not, write to the Free Software Foundation, Inc.,
+ * 51 Franklin Street, Fifth Floor, Boston, MA 02110, USA
+ *
+ *
+ ******************************************************************************/
+
+#ifndef __ODM_INTERFACE_H__
+#define __ODM_INTERFACE_H__
+
+/* */
+/* =========== Constant/Structure/Enum/... Define */
+/* */
+
+/* */
+/* =========== Macro Define */
+/* */
+
+#define _reg_all(_name) ODM_##_name
+#define _reg_ic(_name, _ic) ODM_##_name##_ic
+#define _bit_all(_name) BIT_##_name
+#define _bit_ic(_name, _ic) BIT_##_name##_ic
+
+/* _cat: implemented by Token-Pasting Operator. */
+
+/*===================================
+
+#define ODM_REG_DIG_11N 0xC50
+#define ODM_REG_DIG_11AC 0xDDD
+
+ODM_REG(DIG,_pDM_Odm)
+=====================================*/
+
+#define _reg_11N(_name) ODM_REG_##_name##_11N
+#define _reg_11AC(_name) ODM_REG_##_name##_11AC
+#define _bit_11N(_name) ODM_BIT_##_name##_11N
+#define _bit_11AC(_name) ODM_BIT_##_name##_11AC
+
+#define _cat(_name, _ic_type, _func) \
+ ( \
+ ((_ic_type) & ODM_IC_11N_SERIES) ? _func##_11N(_name) : \
+ _func##_11AC(_name) \
+ )
+
+/* _name: name of register or bit. */
+/* Example: "ODM_REG(R_A_AGC_CORE1, pDM_Odm)" */
+/* gets "ODM_R_A_AGC_CORE1" or "ODM_R_A_AGC_CORE1_8192C",
+ * depends on SupportICType. */
+#define ODM_REG(_name, _pDM_Odm) _cat(_name, _pDM_Odm->SupportICType, _reg)
+#define ODM_BIT(_name, _pDM_Odm) _cat(_name, _pDM_Odm->SupportICType, _bit)
+
+enum odm_h2c_cmd {
+ ODM_H2C_RSSI_REPORT = 0,
+ ODM_H2C_PSD_RESULT= 1,
+ ODM_H2C_PathDiv = 2,
+ ODM_MAX_H2CCMD
+};
+
+/* 2012/02/17 MH For non-MP compile pass only. Linux does not support workitem. */
+/* Suggest HW team to use thread instead of workitem. Windows also support the feature. */
+typedef void (*RT_WORKITEM_CALL_BACK)(void *pContext);
+
+/* =========== Extern Variable ??? It should be forbidden. */
+
+/* =========== EXtern Function Prototype */
+
+u8 ODM_Read1Byte(struct odm_dm_struct *pDM_Odm, u32 RegAddr);
+
+u16 ODM_Read2Byte(struct odm_dm_struct *pDM_Odm, u32 RegAddr);
+
+u32 ODM_Read4Byte(struct odm_dm_struct *pDM_Odm, u32 RegAddr);
+
+void ODM_Write1Byte(struct odm_dm_struct *pDM_Odm, u32 RegAddr, u8 Data);
+
+void ODM_Write2Byte(struct odm_dm_struct *pDM_Odm, u32 RegAddr, u16 Data);
+
+void ODM_Write4Byte(struct odm_dm_struct *pDM_Odm, u32 RegAddr, u32 Data);
+
+void ODM_SetMACReg(struct odm_dm_struct *pDM_Odm, u32 RegAddr,
+ u32 BitMask, u32 Data);
+
+u32 ODM_GetMACReg(struct odm_dm_struct *pDM_Odm, u32 RegAddr, u32 BitMask);
+
+void ODM_SetBBReg(struct odm_dm_struct *pDM_Odm, u32 RegAddr,
+ u32 BitMask, u32 Data);
+
+u32 ODM_GetBBReg(struct odm_dm_struct *pDM_Odm, u32 RegAddr, u32 BitMask);
+
+void ODM_SetRFReg(struct odm_dm_struct *pDM_Odm, enum rf_radio_path eRFPath,
+ u32 RegAddr, u32 BitMask, u32 Data);
+
+u32 ODM_GetRFReg(struct odm_dm_struct *pDM_Odm, enum rf_radio_path eRFPath,
+ u32 RegAddr, u32 BitMask);
+
+/* Memory Relative Function. */
+void ODM_AllocateMemory(struct odm_dm_struct *pDM_Odm, void **pPtr, u32 length);
+void ODM_FreeMemory(struct odm_dm_struct *pDM_Odm, void *pPtr, u32 length);
+
+s32 ODM_CompareMemory(struct odm_dm_struct *pDM_Odm, void *pBuf1, void *pBuf2,
+ u32 length);
+
+/* ODM MISC-spin lock relative API. */
+void ODM_AcquireSpinLock(struct odm_dm_struct *pDM_Odm,
+ enum RT_SPINLOCK_TYPE type);
+
+void ODM_ReleaseSpinLock(struct odm_dm_struct *pDM_Odm,
+ enum RT_SPINLOCK_TYPE type);
+
+/* ODM MISC-workitem relative API. */
+void ODM_InitializeWorkItem(struct odm_dm_struct *pDM_Odm, void *pRtWorkItem,
+ RT_WORKITEM_CALL_BACK RtWorkItemCallback,
+ void *pContext, const char *szID);
+
+void ODM_StartWorkItem(void *pRtWorkItem);
+
+void ODM_StopWorkItem(void *pRtWorkItem);
+
+void ODM_FreeWorkItem(void *pRtWorkItem);
+
+void ODM_ScheduleWorkItem(void *pRtWorkItem);
+
+void ODM_IsWorkItemScheduled(void *pRtWorkItem);
+
+/* ODM Timer relative API. */
+void ODM_StallExecution(u32 usDelay);
+
+void ODM_delay_ms(u32 ms);
+
+void ODM_delay_us(u32 us);
+
+void ODM_sleep_ms(u32 ms);
+
+void ODM_sleep_us(u32 us);
+
+void ODM_SetTimer(struct odm_dm_struct *pDM_Odm, struct timer_list *pTimer,
+ u32 msDelay);
+
+void ODM_InitializeTimer(struct odm_dm_struct *pDM_Odm,
+ struct timer_list *pTimer, void *CallBackFunc,
+ void *pContext, const char *szID);
+
+void ODM_CancelTimer(struct odm_dm_struct *pDM_Odm, struct timer_list *pTimer);
+
+void ODM_ReleaseTimer(struct odm_dm_struct *pDM_Odm, struct timer_list *pTimer);
+
+/* ODM FW relative API. */
+u32 ODM_FillH2CCmd(u8 *pH2CBuffer, u32 H2CBufferLen, u32 CmdNum,
+ u32 *pElementID, u32 *pCmdLen, u8 **pCmbBuffer,
+ u8 *CmdStartSeq);
+
+#endif /* __ODM_INTERFACE_H__ */
diff --git a/drivers/staging/r8188eu/include/odm_precomp.h b/drivers/staging/r8188eu/include/odm_precomp.h
new file mode 100644
index 000000000000..b2fbb5d5ea77
--- /dev/null
+++ b/drivers/staging/r8188eu/include/odm_precomp.h
@@ -0,0 +1,103 @@
+/******************************************************************************
+ *
+ * Copyright(c) 2007 - 2011 Realtek Corporation. All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of version 2 of the GNU General Public License as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
+ * more details.
+ *
+ * You should have received a copy of the GNU General Public License along with
+ * this program; if not, write to the Free Software Foundation, Inc.,
+ * 51 Franklin Street, Fifth Floor, Boston, MA 02110, USA
+ *
+ *
+ ******************************************************************************/
+
+#ifndef __ODM_PRECOMP_H__
+#define __ODM_PRECOMP_H__
+
+#include "odm_types.h"
+
+#define TEST_FALG___ 1
+
+/* 2 Config Flags and Structs - defined by each ODM Type */
+
+#include <osdep_service.h>
+#include <drv_types.h>
+#include <hal_intf.h>
+
+/* 2 OutSrc Header Files */
+
+#include "odm.h"
+#include "odm_HWConfig.h"
+#include "odm_debug.h"
+#include "odm_RegDefine11AC.h"
+#include "odm_RegDefine11N.h"
+
+#include "HalPhyRf.h"
+#include "HalPhyRf_8188e.h"/* for IQK,LCK,Power-tracking */
+#include "Hal8188ERateAdaptive.h"/* for RA,Power training */
+#include "rtl8188e_hal.h"
+
+#include "odm_interface.h"
+#include "odm_reg.h"
+
+#include "HalHWImg8188E_MAC.h"
+#include "HalHWImg8188E_RF.h"
+#include "HalHWImg8188E_BB.h"
+#include "Hal8188EReg.h"
+
+#include "odm_RegConfig8188E.h"
+#include "odm_RTL8188E.h"
+
+void odm_CmnInfoHook_Debug(struct odm_dm_struct *pDM_Odm);
+void odm_CmnInfoInit_Debug(struct odm_dm_struct *pDM_Odm);
+void odm_DIGInit(struct odm_dm_struct *pDM_Odm);
+void odm_RateAdaptiveMaskInit(struct odm_dm_struct *pDM_Odm);
+void odm_DynamicBBPowerSavingInit(struct odm_dm_struct *pDM_Odm);
+void odm_DynamicTxPowerInit(struct odm_dm_struct *pDM_Odm);
+void odm_TXPowerTrackingInit(struct odm_dm_struct *pDM_Odm);
+void ODM_EdcaTurboInit(struct odm_dm_struct *pDM_Odm);
+void odm_SwAntDivInit_NIC(struct odm_dm_struct *pDM_Odm);
+void odm_GlobalAdapterCheck(void);
+void odm_CmnInfoUpdate_Debug(struct odm_dm_struct *pDM_Odm);
+void odm_CommonInfoSelfUpdate(struct odm_dm_struct *pDM_Odm);
+void odm_FalseAlarmCounterStatistics(struct odm_dm_struct *pDM_Odm);
+void odm_DIG(struct odm_dm_struct *pDM_Odm);
+void odm_CCKPacketDetectionThresh(struct odm_dm_struct *pDM_Odm);
+void odm_RefreshRateAdaptiveMaskMP(struct odm_dm_struct *pDM_Odm);
+void odm_DynamicBBPowerSaving(struct odm_dm_struct *pDM_Odm);
+void odm_SwAntDivChkAntSwitch(struct odm_dm_struct *pDM_Odm, u8 Step);
+void odm_EdcaTurboCheck(struct odm_dm_struct *pDM_Odm);
+void odm_DynamicTxPower(struct odm_dm_struct *pDM_Odm);
+void odm_CommonInfoSelfInit(struct odm_dm_struct *pDM_Odm);
+void odm_SwAntDivInit(struct odm_dm_struct *pDM_Odm);
+void odm_RSSIMonitorCheck(struct odm_dm_struct *pDM_Odm);
+void odm_RefreshRateAdaptiveMask(struct odm_dm_struct *pDM_Odm);
+void odm_1R_CCA(struct odm_dm_struct *pDM_Odm);
+void odm_RefreshRateAdaptiveMaskCE(struct odm_dm_struct *pDM_Odm);
+void odm_RefreshRateAdaptiveMaskAPADSL(struct odm_dm_struct *pDM_Odm);
+void odm_DynamicTxPowerNIC(struct odm_dm_struct *pDM_Odm);
+void odm_DynamicTxPowerAP(struct odm_dm_struct *pDM_Odm);
+void odm_RSSIMonitorCheckMP(struct odm_dm_struct *pDM_Odm);
+void odm_RSSIMonitorCheckCE(struct odm_dm_struct *pDM_Odm);
+void odm_RSSIMonitorCheckAP(struct odm_dm_struct *pDM_Odm);
+void odm_TXPowerTrackingThermalMeterInit(struct odm_dm_struct *pDM_Odm);
+void odm_EdcaTurboCheckCE(struct odm_dm_struct *pDM_Odm);
+void odm_TXPowerTrackingCheckCE(struct odm_dm_struct *pDM_Odm);
+void odm_TXPowerTrackingCheckMP(struct odm_dm_struct *pDM_Odm);
+void odm_TXPowerTrackingCheckAP(struct odm_dm_struct *pDM_Odm);
+#if LINUX_VERSION_CODE < KERNEL_VERSION(4, 15, 0)
+void odm_SwAntDivChkAntSwitchCallback(void *FunctionContext);
+#else
+void odm_SwAntDivChkAntSwitchCallback(struct timer_list *t);
+#endif
+void odm_InitHybridAntDiv(struct odm_dm_struct *pDM_Odm);
+void odm_HwAntDiv(struct odm_dm_struct *pDM_Odm);
+
+#endif /* __ODM_PRECOMP_H__ */
diff --git a/drivers/staging/r8188eu/include/odm_reg.h b/drivers/staging/r8188eu/include/odm_reg.h
new file mode 100644
index 000000000000..4221855e333c
--- /dev/null
+++ b/drivers/staging/r8188eu/include/odm_reg.h
@@ -0,0 +1,116 @@
+/******************************************************************************
+ *
+ * Copyright(c) 2007 - 2011 Realtek Corporation. All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of version 2 of the GNU General Public License as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
+ * more details.
+ *
+ * You should have received a copy of the GNU General Public License along with
+ * this program; if not, write to the Free Software Foundation, Inc.,
+ * 51 Franklin Street, Fifth Floor, Boston, MA 02110, USA
+ *
+ *
+ ******************************************************************************/
+/* */
+/* File Name: odm_reg.h */
+/* */
+/* Description: */
+/* */
+/* This file is for general register definition. */
+/* */
+/* */
+/* */
+#ifndef __HAL_ODM_REG_H__
+#define __HAL_ODM_REG_H__
+
+/* */
+/* Register Definition */
+/* */
+
+/* MAC REG */
+#define ODM_BB_RESET 0x002
+#define ODM_DUMMY 0x4fe
+#define ODM_EDCA_VO_PARAM 0x500
+#define ODM_EDCA_VI_PARAM 0x504
+#define ODM_EDCA_BE_PARAM 0x508
+#define ODM_EDCA_BK_PARAM 0x50C
+#define ODM_TXPAUSE 0x522
+
+/* BB REG */
+#define ODM_FPGA_PHY0_PAGE8 0x800
+#define ODM_PSD_SETTING 0x808
+#define ODM_AFE_SETTING 0x818
+#define ODM_TXAGC_B_6_18 0x830
+#define ODM_TXAGC_B_24_54 0x834
+#define ODM_TXAGC_B_MCS32_5 0x838
+#define ODM_TXAGC_B_MCS0_MCS3 0x83c
+#define ODM_TXAGC_B_MCS4_MCS7 0x848
+#define ODM_TXAGC_B_MCS8_MCS11 0x84c
+#define ODM_ANALOG_REGISTER 0x85c
+#define ODM_RF_INTERFACE_OUTPUT 0x860
+#define ODM_TXAGC_B_MCS12_MCS15 0x868
+#define ODM_TXAGC_B_11_A_2_11 0x86c
+#define ODM_AD_DA_LSB_MASK 0x874
+#define ODM_ENABLE_3_WIRE 0x88c
+#define ODM_PSD_REPORT 0x8b4
+#define ODM_R_ANT_SELECT 0x90c
+#define ODM_CCK_ANT_SELECT 0xa07
+#define ODM_CCK_PD_THRESH 0xa0a
+#define ODM_CCK_RF_REG1 0xa11
+#define ODM_CCK_MATCH_FILTER 0xa20
+#define ODM_CCK_RAKE_MAC 0xa2e
+#define ODM_CCK_CNT_RESET 0xa2d
+#define ODM_CCK_TX_DIVERSITY 0xa2f
+#define ODM_CCK_FA_CNT_MSB 0xa5b
+#define ODM_CCK_FA_CNT_LSB 0xa5c
+#define ODM_CCK_NEW_FUNCTION 0xa75
+#define ODM_OFDM_PHY0_PAGE_C 0xc00
+#define ODM_OFDM_RX_ANT 0xc04
+#define ODM_R_A_RXIQI 0xc14
+#define ODM_R_A_AGC_CORE1 0xc50
+#define ODM_R_A_AGC_CORE2 0xc54
+#define ODM_R_B_AGC_CORE1 0xc58
+#define ODM_R_AGC_PAR 0xc70
+#define ODM_R_HTSTF_AGC_PAR 0xc7c
+#define ODM_TX_PWR_TRAINING_A 0xc90
+#define ODM_TX_PWR_TRAINING_B 0xc98
+#define ODM_OFDM_FA_CNT1 0xcf0
+#define ODM_OFDM_PHY0_PAGE_D 0xd00
+#define ODM_OFDM_FA_CNT2 0xda0
+#define ODM_OFDM_FA_CNT3 0xda4
+#define ODM_OFDM_FA_CNT4 0xda8
+#define ODM_TXAGC_A_6_18 0xe00
+#define ODM_TXAGC_A_24_54 0xe04
+#define ODM_TXAGC_A_1_MCS32 0xe08
+#define ODM_TXAGC_A_MCS0_MCS3 0xe10
+#define ODM_TXAGC_A_MCS4_MCS7 0xe14
+#define ODM_TXAGC_A_MCS8_MCS11 0xe18
+#define ODM_TXAGC_A_MCS12_MCS15 0xe1c
+
+/* RF REG */
+#define ODM_GAIN_SETTING 0x00
+#define ODM_CHANNEL 0x18
+
+/* Ant Detect Reg */
+#define ODM_DPDT 0x300
+
+/* PSD Init */
+#define ODM_PSDREG 0x808
+
+/* 92D Path Div */
+#define PATHDIV_REG 0xB30
+#define PATHDIV_TRI 0xBA0
+
+/* */
+/* Bitmap Definition */
+/* */
+
+#define BIT_FA_RESET BIT0
+
+#endif
diff --git a/drivers/staging/r8188eu/include/odm_types.h b/drivers/staging/r8188eu/include/odm_types.h
new file mode 100644
index 000000000000..f62d8b486a28
--- /dev/null
+++ b/drivers/staging/r8188eu/include/odm_types.h
@@ -0,0 +1,61 @@
+/******************************************************************************
+ *
+ * Copyright(c) 2007 - 2011 Realtek Corporation. All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of version 2 of the GNU General Public License as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
+ * more details.
+ *
+ * You should have received a copy of the GNU General Public License along with
+ * this program; if not, write to the Free Software Foundation, Inc.,
+ * 51 Franklin Street, Fifth Floor, Boston, MA 02110, USA
+ *
+ *
+ ******************************************************************************/
+#ifndef __ODM_TYPES_H__
+#define __ODM_TYPES_H__
+
+/* */
+/* Define Different SW team support */
+/* */
+#define ODM_AP 0x01 /* BIT0 */
+#define ODM_ADSL 0x02 /* BIT1 */
+#define ODM_CE 0x04 /* BIT2 */
+#define ODM_MP 0x08 /* BIT3 */
+
+#define RT_PCI_INTERFACE 1
+#define RT_USB_INTERFACE 2
+#define RT_SDIO_INTERFACE 3
+
+enum HAL_STATUS {
+ HAL_STATUS_SUCCESS,
+ HAL_STATUS_FAILURE,
+};
+
+enum RT_SPINLOCK_TYPE {
+ RT_TEMP = 1,
+};
+
+#include <basic_types.h>
+
+#define DEV_BUS_TYPE RT_USB_INTERFACE
+
+#define SET_TX_DESC_ANTSEL_A_88E(__pTxDesc, __Value) \
+ SET_BITS_TO_LE_4BYTE(__pTxDesc+8, 24, 1, __Value)
+#define SET_TX_DESC_ANTSEL_B_88E(__pTxDesc, __Value) \
+ SET_BITS_TO_LE_4BYTE(__pTxDesc+8, 25, 1, __Value)
+#define SET_TX_DESC_ANTSEL_C_88E(__pTxDesc, __Value) \
+ SET_BITS_TO_LE_4BYTE(__pTxDesc+28, 29, 1, __Value)
+
+/* define useless flag to avoid compile warning */
+#define USE_WORKITEM 0
+#define FOR_BRAZIL_PRETEST 0
+#define BT_30_SUPPORT 0
+#define FPGA_TWO_MAC_VERIFICATION 0
+
+#endif /* __ODM_TYPES_H__ */
diff --git a/drivers/staging/r8188eu/include/osdep_intf.h b/drivers/staging/r8188eu/include/osdep_intf.h
new file mode 100644
index 000000000000..c4599c583b59
--- /dev/null
+++ b/drivers/staging/r8188eu/include/osdep_intf.h
@@ -0,0 +1,83 @@
+/******************************************************************************
+ *
+ * Copyright(c) 2007 - 2011 Realtek Corporation. All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of version 2 of the GNU General Public License as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
+ * more details.
+ *
+ * You should have received a copy of the GNU General Public License along with
+ * this program; if not, write to the Free Software Foundation, Inc.,
+ * 51 Franklin Street, Fifth Floor, Boston, MA 02110, USA
+ *
+ *
+ ******************************************************************************/
+
+#ifndef __OSDEP_INTF_H_
+#define __OSDEP_INTF_H_
+
+#include <osdep_service.h>
+#include <drv_types.h>
+
+struct intf_priv {
+ u8 *intf_dev;
+ u32 max_iosz; /* USB2.0: 128, USB1.1: 64, SDIO:64 */
+ u32 max_xmitsz; /* USB2.0: unlimited, SDIO:512 */
+ u32 max_recvsz; /* USB2.0: unlimited, SDIO:512 */
+
+ u8 *io_rwmem;
+ u8 *allocated_io_rwmem;
+ u32 io_wsz; /* unit: 4bytes */
+ u32 io_rsz;/* unit: 4bytes */
+ u8 intf_status;
+
+ void (*_bus_io)(u8 *priv);
+
+/*
+Under Sync. IRP (SDIO/USB)
+A protection mechanism is necessary for the io_rwmem(read/write protocol)
+
+Under Async. IRP (SDIO/USB)
+The protection mechanism is through the pending queue.
+*/
+ struct mutex ioctl_mutex;
+ /* when in USB, IO is through interrupt in/out endpoints */
+ struct usb_device *udev;
+ struct urb *piorw_urb;
+ u8 io_irp_cnt;
+ u8 bio_irp_pending;
+ struct semaphore io_retevt;
+ struct timer_list io_timer;
+ u8 bio_irp_timeout;
+ u8 bio_timer_cancel;
+};
+
+u8 rtw_init_drv_sw(struct adapter *padapter);
+u8 rtw_free_drv_sw(struct adapter *padapter);
+u8 rtw_reset_drv_sw(struct adapter *padapter);
+
+u32 rtw_start_drv_threads(struct adapter *padapter);
+void rtw_stop_drv_threads (struct adapter *padapter);
+void rtw_cancel_all_timer(struct adapter *padapter);
+
+int rtw_ioctl(struct net_device *dev, struct ifreq *rq, int cmd);
+
+int rtw_init_netdev_name(struct net_device *pnetdev, const char *ifname);
+struct net_device *rtw_init_netdev(struct adapter *padapter);
+u16 rtw_recv_select_queue(struct sk_buff *skb);
+void rtw_proc_init_one(struct net_device *dev);
+void rtw_proc_remove_one(struct net_device *dev);
+
+void rtw_ips_dev_unload(struct adapter *padapter);
+
+int rtw_ips_pwr_up(struct adapter *padapter);
+void rtw_ips_pwr_down(struct adapter *padapter);
+int rtw_hw_suspend(struct adapter *padapter);
+int rtw_hw_resume(struct adapter *padapter);
+
+#endif /* _OSDEP_INTF_H_ */
diff --git a/drivers/staging/r8188eu/include/osdep_service.h b/drivers/staging/r8188eu/include/osdep_service.h
new file mode 100644
index 000000000000..ce76a2c99bbd
--- /dev/null
+++ b/drivers/staging/r8188eu/include/osdep_service.h
@@ -0,0 +1,489 @@
+/******************************************************************************
+ *
+ * Copyright(c) 2007 - 2011 Realtek Corporation. All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of version 2 of the GNU General Public License as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
+ * more details.
+ *
+ * You should have received a copy of the GNU General Public License along with
+ * this program; if not, write to the Free Software Foundation, Inc.,
+ * 51 Franklin Street, Fifth Floor, Boston, MA 02110, USA
+ *
+ *
+ ******************************************************************************/
+#ifndef __OSDEP_SERVICE_H_
+#define __OSDEP_SERVICE_H_
+
+#include <linux/version.h>
+#if LINUX_VERSION_CODE >= KERNEL_VERSION(4, 11, 0)
+#include <linux/sched/signal.h>
+#endif
+#include <basic_types.h>
+
+#define _FAIL 0
+#define _SUCCESS 1
+#define RTW_RX_HANDLED 2
+
+#include <linux/spinlock.h>
+#include <linux/compiler.h>
+#include <linux/kernel.h>
+#include <linux/errno.h>
+#include <linux/init.h>
+#include <linux/slab.h>
+#include <linux/module.h>
+#include <linux/kref.h>
+#include <linux/netdevice.h>
+#include <linux/skbuff.h>
+#include <linux/circ_buf.h>
+#include <linux/uaccess.h>
+#include <asm/byteorder.h>
+#include <asm/atomic.h>
+#include <linux/io.h>
+#include <linux/semaphore.h>
+#include <linux/sem.h>
+#include <linux/sched.h>
+#include <linux/etherdevice.h>
+#include <linux/wireless.h>
+#include <net/iw_handler.h>
+#include <linux/if_arp.h>
+#include <linux/rtnetlink.h>
+#include <linux/delay.h>
+#include <linux/proc_fs.h> /* Necessary because we use the proc fs */
+#include <linux/interrupt.h> /* for struct tasklet_struct */
+#include <linux/ip.h>
+#include <linux/kthread.h>
+
+#include <linux/usb.h>
+#include <linux/usb/ch9.h>
+
+struct __queue {
+ struct list_head queue;
+ spinlock_t lock;
+};
+
+#define thread_exit() complete_and_exit(NULL, 0)
+
+static inline struct list_head *get_list_head(struct __queue *queue)
+{
+ return (&(queue->queue));
+}
+
+static inline int _enter_critical_mutex(struct mutex *pmutex, unsigned long *pirqL)
+{
+ int ret;
+
+ ret = mutex_lock_interruptible(pmutex);
+ return ret;
+}
+
+static inline void _exit_critical_mutex(struct mutex *pmutex, unsigned long *pirqL)
+{
+ mutex_unlock(pmutex);
+}
+
+static inline void rtw_list_delete(struct list_head *plist)
+{
+ list_del_init(plist);
+}
+
+#if LINUX_VERSION_CODE < KERNEL_VERSION(4, 15, 0)
+static inline void _init_timer(struct timer_list *ptimer,struct net_device *nic_hdl,void *pfunc,void* cntx)
+{
+ ptimer->function = pfunc;
+ ptimer->data = (unsigned long)cntx;
+ init_timer(ptimer);
+}
+#endif
+
+static inline void _set_timer(struct timer_list *ptimer,u32 delay_time)
+{
+ mod_timer(ptimer , (jiffies+(delay_time*HZ/1000)));
+}
+
+static inline void _cancel_timer(struct timer_list *ptimer,u8 *bcancelled)
+{
+ del_timer_sync(ptimer);
+ *bcancelled= true;/* true ==1; false==0 */
+}
+
+#define RTW_TIMER_HDL_ARGS void *FunctionContext
+#define RTW_TIMER_HDL_NAME(name) rtw_##name##_timer_hdl
+#define RTW_DECLARE_TIMER_HDL(name) void RTW_TIMER_HDL_NAME(name)(RTW_TIMER_HDL_ARGS)
+
+static inline void _init_workitem(struct work_struct *pwork, void *pfunc, void * cntx)
+{
+ INIT_WORK(pwork, pfunc);
+}
+
+static inline void _set_workitem(struct work_struct *pwork)
+{
+ schedule_work(pwork);
+}
+
+static inline void _cancel_workitem_sync(struct work_struct *pwork)
+{
+ cancel_work_sync(pwork);
+}
+/* */
+/* Global Mutex: can only be used at PASSIVE level. */
+/* */
+
+#define ACQUIRE_GLOBAL_MUTEX(_MutexCounter) \
+{ \
+ while (atomic_inc_return((atomic_t *)&(_MutexCounter)) != 1)\
+ { \
+ atomic_dec((atomic_t *)&(_MutexCounter)); \
+ msleep(10); \
+ } \
+}
+
+#define RELEASE_GLOBAL_MUTEX(_MutexCounter) \
+{ \
+ atomic_dec((atomic_t *)&(_MutexCounter)); \
+}
+
+static inline int rtw_netif_queue_stopped(struct net_device *pnetdev)
+{
+ return netif_tx_queue_stopped(netdev_get_tx_queue(pnetdev, 0)) &&
+ netif_tx_queue_stopped(netdev_get_tx_queue(pnetdev, 1)) &&
+ netif_tx_queue_stopped(netdev_get_tx_queue(pnetdev, 2)) &&
+ netif_tx_queue_stopped(netdev_get_tx_queue(pnetdev, 3));
+}
+
+static inline void rtw_netif_wake_queue(struct net_device *pnetdev)
+{
+ netif_tx_wake_all_queues(pnetdev);
+}
+
+static inline void rtw_netif_start_queue(struct net_device *pnetdev)
+{
+ netif_tx_start_all_queues(pnetdev);
+}
+
+static inline void rtw_netif_stop_queue(struct net_device *pnetdev)
+{
+ netif_tx_stop_all_queues(pnetdev);
+}
+
+#ifndef BIT
+ #define BIT(x) ( 1 << (x))
+#endif
+
+#define BIT0 0x00000001
+#define BIT1 0x00000002
+#define BIT2 0x00000004
+#define BIT3 0x00000008
+#define BIT4 0x00000010
+#define BIT5 0x00000020
+#define BIT6 0x00000040
+#define BIT7 0x00000080
+#define BIT8 0x00000100
+#define BIT9 0x00000200
+#define BIT10 0x00000400
+#define BIT11 0x00000800
+#define BIT12 0x00001000
+#define BIT13 0x00002000
+#define BIT14 0x00004000
+#define BIT15 0x00008000
+#define BIT16 0x00010000
+#define BIT17 0x00020000
+#define BIT18 0x00040000
+#define BIT19 0x00080000
+#define BIT20 0x00100000
+#define BIT21 0x00200000
+#define BIT22 0x00400000
+#define BIT23 0x00800000
+#define BIT24 0x01000000
+#define BIT25 0x02000000
+#define BIT26 0x04000000
+#define BIT27 0x08000000
+#define BIT28 0x10000000
+#define BIT29 0x20000000
+#define BIT30 0x40000000
+#define BIT31 0x80000000
+#define BIT32 0x0100000000
+#define BIT33 0x0200000000
+#define BIT34 0x0400000000
+#define BIT35 0x0800000000
+#define BIT36 0x1000000000
+
+extern int RTW_STATUS_CODE(int error_code);
+
+/* flags used for rtw_update_mem_stat() */
+enum {
+ MEM_STAT_VIR_ALLOC_SUCCESS,
+ MEM_STAT_VIR_ALLOC_FAIL,
+ MEM_STAT_VIR_FREE,
+ MEM_STAT_PHY_ALLOC_SUCCESS,
+ MEM_STAT_PHY_ALLOC_FAIL,
+ MEM_STAT_PHY_FREE,
+ MEM_STAT_TX, /* used to distinguish TX/RX, asigned from caller */
+ MEM_STAT_TX_ALLOC_SUCCESS,
+ MEM_STAT_TX_ALLOC_FAIL,
+ MEM_STAT_TX_FREE,
+ MEM_STAT_RX, /* used to distinguish TX/RX, asigned from caller */
+ MEM_STAT_RX_ALLOC_SUCCESS,
+ MEM_STAT_RX_ALLOC_FAIL,
+ MEM_STAT_RX_FREE
+};
+
+extern unsigned char MCS_rate_2R[16];
+extern unsigned char MCS_rate_1R[16];
+extern unsigned char RTW_WPA_OUI[];
+extern unsigned char WPA_TKIP_CIPHER[4];
+extern unsigned char RSN_TKIP_CIPHER[4];
+
+#define rtw_update_mem_stat(flag, sz) do {} while (0)
+u8 *_rtw_vmalloc(u32 sz);
+u8 *_rtw_zvmalloc(u32 sz);
+void _rtw_vmfree(u8 *pbuf, u32 sz);
+u8 *_rtw_zmalloc(u32 sz);
+u8 *_rtw_malloc(u32 sz);
+void _rtw_mfree(u8 *pbuf, u32 sz);
+#define rtw_vmalloc(sz) _rtw_vmalloc((sz))
+#define rtw_zvmalloc(sz) _rtw_zvmalloc((sz))
+#define rtw_vmfree(pbuf, sz) _rtw_vmfree((pbuf), (sz))
+#define rtw_malloc(sz) _rtw_malloc((sz))
+#define rtw_zmalloc(sz) _rtw_zmalloc((sz))
+#define rtw_mfree(pbuf, sz) _rtw_mfree((pbuf), (sz))
+
+void *rtw_malloc2d(int h, int w, int size);
+void rtw_mfree2d(void *pbuf, int h, int w, int size);
+
+u32 _rtw_down_sema(struct semaphore *sema);
+void _rtw_mutex_init(struct mutex *pmutex);
+void _rtw_mutex_free(struct mutex *pmutex);
+void _rtw_spinlock_free(spinlock_t *plock);
+
+void _rtw_init_queue(struct __queue *pqueue);
+
+u32 rtw_systime_to_ms(u32 systime);
+u32 rtw_ms_to_systime(u32 ms);
+s32 rtw_get_passing_time_ms(u32 start);
+s32 rtw_get_time_interval_ms(u32 start, u32 end);
+
+void rtw_sleep_schedulable(int ms);
+
+void rtw_msleep_os(int ms);
+void rtw_usleep_os(int us);
+
+u32 rtw_atoi(u8 *s);
+
+void rtw_mdelay_os(int ms);
+void rtw_udelay_os(int us);
+
+void rtw_yield_os(void);
+
+static inline unsigned char _cancel_timer_ex(struct timer_list *ptimer)
+{
+ return del_timer_sync(ptimer);
+}
+
+static __inline void thread_enter(char *name)
+{
+#ifdef daemonize
+ daemonize("%s", name);
+#endif
+ allow_signal(SIGTERM);
+}
+
+static inline void flush_signals_thread(void)
+{
+ if (signal_pending (current))
+ flush_signals(current);
+}
+
+static inline int res_to_status(int res)
+{
+ return res;
+}
+
+#define _RND(sz, r) ((((sz)+((r)-1))/(r))*(r))
+#define RND4(x) (((x >> 2) + (((x & 3) == 0) ? 0: 1)) << 2)
+
+static inline u32 _RND4(u32 sz)
+{
+ u32 val;
+
+ val = ((sz >> 2) + ((sz & 3) ? 1: 0)) << 2;
+ return val;
+}
+
+static inline u32 _RND8(u32 sz)
+{
+ u32 val;
+
+ val = ((sz >> 3) + ((sz & 7) ? 1: 0)) << 3;
+ return val;
+}
+
+static inline u32 _RND128(u32 sz)
+{
+ u32 val;
+
+ val = ((sz >> 7) + ((sz & 127) ? 1: 0)) << 7;
+ return val;
+}
+
+static inline u32 _RND256(u32 sz)
+{
+ u32 val;
+
+ val = ((sz >> 8) + ((sz & 255) ? 1: 0)) << 8;
+ return val;
+}
+
+static inline u32 _RND512(u32 sz)
+{
+ u32 val;
+
+ val = ((sz >> 9) + ((sz & 511) ? 1: 0)) << 9;
+ return val;
+}
+
+static inline u32 bitshift(u32 bitmask)
+{
+ u32 i;
+
+ for (i = 0; i <= 31; i++)
+ if (((bitmask>>i) & 0x1) == 1) break;
+ return i;
+}
+
+/* limitation of path length */
+#define PATH_LENGTH_MAX PATH_MAX
+
+void rtw_suspend_lock_init(void);
+void rtw_suspend_lock_uninit(void);
+void rtw_lock_suspend(void);
+void rtw_unlock_suspend(void);
+
+/* Atomic integer operations */
+#define ATOMIC_T atomic_t
+
+void ATOMIC_SET(ATOMIC_T *v, int i);
+int ATOMIC_READ(ATOMIC_T *v);
+void ATOMIC_ADD(ATOMIC_T *v, int i);
+void ATOMIC_SUB(ATOMIC_T *v, int i);
+void ATOMIC_INC(ATOMIC_T *v);
+void ATOMIC_DEC(ATOMIC_T *v);
+int ATOMIC_ADD_RETURN(ATOMIC_T *v, int i);
+int ATOMIC_SUB_RETURN(ATOMIC_T *v, int i);
+int ATOMIC_INC_RETURN(ATOMIC_T *v);
+int ATOMIC_DEC_RETURN(ATOMIC_T *v);
+
+struct rtw_netdev_priv_indicator {
+ void *priv;
+ u32 sizeof_priv;
+};
+struct net_device *rtw_alloc_etherdev_with_old_priv(int sizeof_priv,
+ void *old_priv);
+struct net_device *rtw_alloc_etherdev(int sizeof_priv);
+
+#define rtw_netdev_priv(netdev) \
+ (((struct rtw_netdev_priv_indicator *)netdev_priv(netdev))->priv)
+void rtw_free_netdev(struct net_device *netdev);
+
+#define NDEV_FMT "%s"
+#define NDEV_ARG(ndev) ndev->name
+#define ADPT_FMT "%s"
+#define ADPT_ARG(adapter) adapter->pnetdev->name
+#define FUNC_NDEV_FMT "%s(%s)"
+#define FUNC_NDEV_ARG(ndev) __func__, ndev->name
+#define FUNC_ADPT_FMT "%s(%s)"
+#define FUNC_ADPT_ARG(adapter) __func__, adapter->pnetdev->name
+
+#define rtw_signal_process(pid, sig) kill_pid(find_vpid((pid)),(sig), 1)
+
+u64 rtw_modular64(u64 x, u64 y);
+u64 rtw_division64(u64 x, u64 y);
+
+/* Macros for handling unaligned memory accesses */
+
+#define RTW_GET_BE16(a) ((u16) (((a)[0] << 8) | (a)[1]))
+#define RTW_PUT_BE16(a, val) \
+ do { \
+ (a)[0] = ((u16) (val)) >> 8; \
+ (a)[1] = ((u16) (val)) & 0xff; \
+ } while (0)
+
+#define RTW_PUT_LE16(a, val) \
+ do { \
+ (a)[1] = ((u16) (val)) >> 8; \
+ (a)[0] = ((u16) (val)) & 0xff; \
+ } while (0)
+
+#define RTW_GET_BE24(a) ((((u32) (a)[0]) << 16) | (((u32) (a)[1]) << 8) | \
+ ((u32) (a)[2]))
+#define RTW_PUT_BE24(a, val) \
+ do { \
+ (a)[0] = (u8) ((((u32) (val)) >> 16) & 0xff); \
+ (a)[1] = (u8) ((((u32) (val)) >> 8) & 0xff); \
+ (a)[2] = (u8) (((u32) (val)) & 0xff); \
+ } while (0)
+
+#define RTW_GET_BE32(a) ((((u32) (a)[0]) << 24) | (((u32) (a)[1]) << 16) | \
+ (((u32) (a)[2]) << 8) | ((u32) (a)[3]))
+#define RTW_PUT_BE32(a, val) \
+ do { \
+ (a)[0] = (u8) ((((u32) (val)) >> 24) & 0xff); \
+ (a)[1] = (u8) ((((u32) (val)) >> 16) & 0xff); \
+ (a)[2] = (u8) ((((u32) (val)) >> 8) & 0xff); \
+ (a)[3] = (u8) (((u32) (val)) & 0xff); \
+ } while (0)
+
+#define RTW_GET_LE32(a) ((((u32) (a)[3]) << 24) | (((u32) (a)[2]) << 16) | \
+ (((u32) (a)[1]) << 8) | ((u32) (a)[0]))
+#define RTW_PUT_LE32(a, val) \
+ do { \
+ (a)[3] = (u8) ((((u32) (val)) >> 24) & 0xff); \
+ (a)[2] = (u8) ((((u32) (val)) >> 16) & 0xff); \
+ (a)[1] = (u8) ((((u32) (val)) >> 8) & 0xff); \
+ (a)[0] = (u8) (((u32) (val)) & 0xff); \
+ } while (0)
+
+#define RTW_GET_BE64(a) ((((u64) (a)[0]) << 56) | (((u64) (a)[1]) << 48) | \
+ (((u64) (a)[2]) << 40) | (((u64) (a)[3]) << 32) | \
+ (((u64) (a)[4]) << 24) | (((u64) (a)[5]) << 16) | \
+ (((u64) (a)[6]) << 8) | ((u64) (a)[7]))
+#define RTW_PUT_BE64(a, val) \
+ do { \
+ (a)[0] = (u8) (((u64) (val)) >> 56); \
+ (a)[1] = (u8) (((u64) (val)) >> 48); \
+ (a)[2] = (u8) (((u64) (val)) >> 40); \
+ (a)[3] = (u8) (((u64) (val)) >> 32); \
+ (a)[4] = (u8) (((u64) (val)) >> 24); \
+ (a)[5] = (u8) (((u64) (val)) >> 16); \
+ (a)[6] = (u8) (((u64) (val)) >> 8); \
+ (a)[7] = (u8) (((u64) (val)) & 0xff); \
+ } while (0)
+
+#define RTW_GET_LE64(a) ((((u64) (a)[7]) << 56) | (((u64) (a)[6]) << 48) | \
+ (((u64) (a)[5]) << 40) | (((u64) (a)[4]) << 32) | \
+ (((u64) (a)[3]) << 24) | (((u64) (a)[2]) << 16) | \
+ (((u64) (a)[1]) << 8) | ((u64) (a)[0]))
+
+void rtw_buf_free(u8 **buf, u32 *buf_len);
+void rtw_buf_update(u8 **buf, u32 *buf_len, u8 *src, u32 src_len);
+
+struct rtw_cbuf {
+ u32 write;
+ u32 read;
+ u32 size;
+ void *bufs[0];
+};
+
+bool rtw_cbuf_full(struct rtw_cbuf *cbuf);
+bool rtw_cbuf_empty(struct rtw_cbuf *cbuf);
+bool rtw_cbuf_push(struct rtw_cbuf *cbuf, void *buf);
+void *rtw_cbuf_pop(struct rtw_cbuf *cbuf);
+struct rtw_cbuf *rtw_cbuf_alloc(u32 size);
+int wifirate2_ratetbl_inx(unsigned char rate);
+
+#endif
diff --git a/drivers/staging/r8188eu/include/recv_osdep.h b/drivers/staging/r8188eu/include/recv_osdep.h
new file mode 100644
index 000000000000..b6ddf0ba2dde
--- /dev/null
+++ b/drivers/staging/r8188eu/include/recv_osdep.h
@@ -0,0 +1,54 @@
+/******************************************************************************
+ *
+ * Copyright(c) 2007 - 2011 Realtek Corporation. All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of version 2 of the GNU General Public License as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
+ * more details.
+ *
+ * You should have received a copy of the GNU General Public License along with
+ * this program; if not, write to the Free Software Foundation, Inc.,
+ * 51 Franklin Street, Fifth Floor, Boston, MA 02110, USA
+ *
+ *
+ ******************************************************************************/
+#ifndef __RECV_OSDEP_H_
+#define __RECV_OSDEP_H_
+
+#include <osdep_service.h>
+#include <drv_types.h>
+
+int _rtw_init_recv_priv(struct recv_priv *precvpriv, struct adapter *padapter);
+void _rtw_free_recv_priv(struct recv_priv *precvpriv);
+
+s32 rtw_recv_entry(struct recv_frame *precv_frame);
+int rtw_recv_indicatepkt(struct adapter *adapter, struct recv_frame *recv_frame);
+void rtw_recv_returnpacket(struct net_device *cnxt, struct sk_buff *retpkt);
+
+void rtw_hostapd_mlme_rx(struct adapter *padapter, struct recv_frame *recv_fr);
+void rtw_handle_tkip_mic_err(struct adapter *padapter, u8 bgroup);
+
+int rtw_init_recv_priv(struct recv_priv *precvpriv, struct adapter *padapter);
+void rtw_free_recv_priv(struct recv_priv *precvpriv);
+
+int rtw_os_recv_resource_init(struct recv_priv *recvpr, struct adapter *adapt);
+int rtw_os_recv_resource_alloc(struct adapter *adapt, struct recv_frame *recvfr);
+void rtw_os_recv_resource_free(struct recv_priv *precvpriv);
+
+int rtw_os_recvbuf_resource_alloc(struct adapter *adapt, struct recv_buf *buf);
+int rtw_os_recvbuf_resource_free(struct adapter *adapt, struct recv_buf *buf);
+
+void rtw_os_read_port(struct adapter *padapter, struct recv_buf *precvbuf);
+
+void rtw_init_recv_timer(struct recv_reorder_ctrl *preorder_ctrl);
+int nat25_handle_frame(struct adapter *priv, struct sk_buff *skb);
+int _netdev_open(struct net_device *pnetdev);
+int netdev_open(struct net_device *pnetdev);
+int netdev_close(struct net_device *pnetdev);
+
+#endif /* */
diff --git a/drivers/staging/r8188eu/include/rtl8188e_cmd.h b/drivers/staging/r8188eu/include/rtl8188e_cmd.h
new file mode 100644
index 000000000000..b32bc28503d0
--- /dev/null
+++ b/drivers/staging/r8188eu/include/rtl8188e_cmd.h
@@ -0,0 +1,122 @@
+/******************************************************************************
+ *
+ * Copyright(c) 2007 - 2011 Realtek Corporation. All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of version 2 of the GNU General Public License as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
+ * more details.
+ *
+ * You should have received a copy of the GNU General Public License along with
+ * this program; if not, write to the Free Software Foundation, Inc.,
+ * 51 Franklin Street, Fifth Floor, Boston, MA 02110, USA
+ *
+ *
+ ******************************************************************************/
+#ifndef __RTL8188E_CMD_H__
+#define __RTL8188E_CMD_H__
+
+enum RTL8188E_H2C_CMD_ID {
+ /* Class Common */
+ H2C_COM_RSVD_PAGE = 0x00,
+ H2C_COM_MEDIA_STATUS_RPT = 0x01,
+ H2C_COM_SCAN = 0x02,
+ H2C_COM_KEEP_ALIVE = 0x03,
+ H2C_COM_DISCNT_DECISION = 0x04,
+ H2C_COM_INIT_OFFLOAD = 0x06,
+ H2C_COM_REMOTE_WAKE_CTL = 0x07,
+ H2C_COM_AP_OFFLOAD = 0x08,
+ H2C_COM_BCN_RSVD_PAGE = 0x09,
+ H2C_COM_PROB_RSP_RSVD_PAGE = 0x0A,
+
+ /* Class PS */
+ H2C_PS_PWR_MODE = 0x20,
+ H2C_PS_TUNE_PARA = 0x21,
+ H2C_PS_TUNE_PARA_2 = 0x22,
+ H2C_PS_LPS_PARA = 0x23,
+ H2C_PS_P2P_OFFLOAD = 0x24,
+
+ /* Class DM */
+ H2C_DM_MACID_CFG = 0x40,
+ H2C_DM_TXBF = 0x41,
+
+ /* Class BT */
+ H2C_BT_COEX_MASK = 0x60,
+ H2C_BT_COEX_GPIO_MODE = 0x61,
+ H2C_BT_DAC_SWING_VAL = 0x62,
+ H2C_BT_PSD_RST = 0x63,
+
+ /* Class */
+ H2C_RESET_TSF = 0xc0,
+};
+
+struct cmd_msg_parm {
+ u8 eid; /* element id */
+ u8 sz; /* sz */
+ u8 buf[6];
+};
+
+enum {
+ PWRS
+};
+
+struct setpwrmode_parm {
+ u8 Mode;/* 0:Active,1:LPS,2:WMMPS */
+ u8 SmartPS_RLBM;/* LPS= 0:PS_Poll,1:PS_Poll,2:NullData,WMM= 0:PS_Poll,1:NullData */
+ u8 AwakeInterval; /* unit: beacon interval */
+ u8 bAllQueueUAPSD;
+ u8 PwrState;/* AllON(0x0c),RFON(0x04),RFOFF(0x00) */
+};
+
+struct H2C_SS_RFOFF_PARAM {
+ u8 ROFOn; /* 1: on, 0:off */
+ u16 gpio_period; /* unit: 1024 us */
+} __packed;
+
+struct joinbssrpt_parm {
+ u8 OpMode; /* RT_MEDIA_STATUS */
+};
+
+struct rsvdpage_loc {
+ u8 LocProbeRsp;
+ u8 LocPsPoll;
+ u8 LocNullData;
+ u8 LocQosNull;
+ u8 LocBTQosNull;
+};
+
+struct P2P_PS_Offload_t {
+ u8 Offload_En:1;
+ u8 role:1; /* 1: Owner, 0: Client */
+ u8 CTWindow_En:1;
+ u8 NoA0_En:1;
+ u8 NoA1_En:1;
+ u8 AllStaSleep:1; /* Only valid in Owner */
+ u8 discovery:1;
+ u8 rsvd:1;
+};
+
+struct P2P_PS_CTWPeriod_t {
+ u8 CTWPeriod; /* TU */
+};
+
+/* host message to firmware cmd */
+void rtl8188e_set_FwPwrMode_cmd(struct adapter *padapter, u8 Mode);
+void rtl8188e_set_FwJoinBssReport_cmd(struct adapter *padapter, u8 mstatus);
+u8 rtl8188e_set_rssi_cmd(struct adapter *padapter, u8 *param);
+u8 rtl8188e_set_raid_cmd(struct adapter *padapter, u32 mask);
+void rtl8188e_Add_RateATid(struct adapter *padapter, u32 bitmap, u8 arg,
+ u8 rssi_level);
+
+#ifdef CONFIG_88EU_P2P
+void rtl8188e_set_p2p_ps_offload_cmd(struct adapter *adapt, u8 p2p_ps_state);
+#endif /* CONFIG_88EU_P2P */
+
+void CheckFwRsvdPageContent(struct adapter *adapt);
+void rtl8188e_set_FwMediaStatus_cmd(struct adapter *adapt, __le16 mstatus_rpt);
+
+#endif/* __RTL8188E_CMD_H__ */
diff --git a/drivers/staging/r8188eu/include/rtl8188e_dm.h b/drivers/staging/r8188eu/include/rtl8188e_dm.h
new file mode 100644
index 000000000000..97a3175250ef
--- /dev/null
+++ b/drivers/staging/r8188eu/include/rtl8188e_dm.h
@@ -0,0 +1,62 @@
+/******************************************************************************
+ *
+ * Copyright(c) 2007 - 2011 Realtek Corporation. All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of version 2 of the GNU General Public License as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
+ * more details.
+ *
+ * You should have received a copy of the GNU General Public License along with
+ * this program; if not, write to the Free Software Foundation, Inc.,
+ * 51 Franklin Street, Fifth Floor, Boston, MA 02110, USA
+ *
+ *
+ ******************************************************************************/
+#ifndef __RTL8188E_DM_H__
+#define __RTL8188E_DM_H__
+enum{
+ UP_LINK,
+ DOWN_LINK,
+};
+/* duplicate code,will move to ODM ######### */
+#define IQK_MAC_REG_NUM 4
+#define IQK_ADDA_REG_NUM 16
+#define IQK_BB_REG_NUM 9
+#define HP_THERMAL_NUM 8
+/* duplicate code,will move to ODM ######### */
+struct dm_priv {
+ u8 DM_Type;
+ u8 DMFlag;
+ u8 InitDMFlag;
+ u32 InitODMFlag;
+
+ /* Upper and Lower Signal threshold for Rate Adaptive*/
+ int UndecoratedSmoothedPWDB;
+ int UndecoratedSmoothedCCK;
+ int EntryMinUndecoratedSmoothedPWDB;
+ int EntryMaxUndecoratedSmoothedPWDB;
+ int MinUndecoratedPWDBForDM;
+ int LastMinUndecoratedPWDBForDM;
+
+ /* for High Power */
+ u8 bDynamicTxPowerEnable;
+ u8 LastDTPLvl;
+ u8 DynamicTxHighPowerLvl;/* Tx Power Control for Near/Far Range */
+ u8 PowerIndex_backup[6];
+};
+
+void rtl8188e_init_dm_priv(struct adapter *adapt);
+void rtl8188e_deinit_dm_priv(struct adapter *adapt);
+void rtl8188e_InitHalDm(struct adapter *adapt);
+void rtl8188e_HalDmWatchDog(struct adapter *adapt);
+
+void AntDivCompare8188E(struct adapter *adapt, struct wlan_bssid_ex *dst,
+ struct wlan_bssid_ex *src);
+u8 AntDivBeforeLink8188E(struct adapter *adapt);
+
+#endif
diff --git a/drivers/staging/r8188eu/include/rtl8188e_hal.h b/drivers/staging/r8188eu/include/rtl8188e_hal.h
new file mode 100644
index 000000000000..09368a5cd6e8
--- /dev/null
+++ b/drivers/staging/r8188eu/include/rtl8188e_hal.h
@@ -0,0 +1,471 @@
+/******************************************************************************
+ *
+ * Copyright(c) 2007 - 2011 Realtek Corporation. All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of version 2 of the GNU General Public License as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
+ * more details.
+ *
+ * You should have received a copy of the GNU General Public License along with
+ * this program; if not, write to the Free Software Foundation, Inc.,
+ * 51 Franklin Street, Fifth Floor, Boston, MA 02110, USA
+ *
+ *
+ ******************************************************************************/
+#ifndef __RTL8188E_HAL_H__
+#define __RTL8188E_HAL_H__
+
+/* include HAL Related header after HAL Related compiling flags */
+#include "rtl8188e_spec.h"
+#include "Hal8188EPhyReg.h"
+#include "Hal8188EPhyCfg.h"
+#include "rtl8188e_rf.h"
+#include "rtl8188e_dm.h"
+#include "rtl8188e_recv.h"
+#include "rtl8188e_xmit.h"
+#include "rtl8188e_cmd.h"
+#include "Hal8188EPwrSeq.h"
+#include "rtl8188e_sreset.h"
+#include "rtw_efuse.h"
+
+#include "odm_precomp.h"
+
+/* Fw Array */
+#define Rtl8188E_FwImageArray Rtl8188EFwImgArray
+#define Rtl8188E_FWImgArrayLength Rtl8188EFWImgArrayLength
+
+#define RTL8188E_FW_UMC_IMG "rtl8188E\\rtl8188efw.bin"
+#define RTL8188E_PHY_REG "rtl8188E\\PHY_REG_1T.txt"
+#define RTL8188E_PHY_RADIO_A "rtl8188E\\radio_a_1T.txt"
+#define RTL8188E_PHY_RADIO_B "rtl8188E\\radio_b_1T.txt"
+#define RTL8188E_AGC_TAB "rtl8188E\\AGC_TAB_1T.txt"
+#define RTL8188E_PHY_MACREG "rtl8188E\\MAC_REG.txt"
+#define RTL8188E_PHY_REG_PG "rtl8188E\\PHY_REG_PG.txt"
+#define RTL8188E_PHY_REG_MP "rtl8188E\\PHY_REG_MP.txt"
+
+/* RTL8188E Power Configuration CMDs for USB/SDIO interfaces */
+#define Rtl8188E_NIC_PWR_ON_FLOW rtl8188E_power_on_flow
+#define Rtl8188E_NIC_RF_OFF_FLOW rtl8188E_radio_off_flow
+#define Rtl8188E_NIC_DISABLE_FLOW rtl8188E_card_disable_flow
+#define Rtl8188E_NIC_ENABLE_FLOW rtl8188E_card_enable_flow
+#define Rtl8188E_NIC_SUSPEND_FLOW rtl8188E_suspend_flow
+#define Rtl8188E_NIC_RESUME_FLOW rtl8188E_resume_flow
+#define Rtl8188E_NIC_PDN_FLOW rtl8188E_hwpdn_flow
+#define Rtl8188E_NIC_LPS_ENTER_FLOW rtl8188E_enter_lps_flow
+#define Rtl8188E_NIC_LPS_LEAVE_FLOW rtl8188E_leave_lps_flow
+
+#define DRVINFO_SZ 4 /* unit is 8bytes */
+#define PageNum_128(_Len) (u32)(((_Len)>>7) + ((_Len) & 0x7F ? 1 : 0))
+
+/* download firmware related data structure */
+#define FW_8188E_SIZE 0x4000 /* 16384,16k */
+#define FW_8188E_START_ADDRESS 0x1000
+#define FW_8188E_END_ADDRESS 0x1FFF /* 0x5FFF */
+
+#define MAX_PAGE_SIZE 4096 /* @ page : 4k bytes */
+
+#define IS_FW_HEADER_EXIST(_pFwHdr) \
+ ((le16_to_cpu(_pFwHdr->Signature)&0xFFF0) == 0x92C0 || \
+ (le16_to_cpu(_pFwHdr->Signature)&0xFFF0) == 0x88C0 || \
+ (le16_to_cpu(_pFwHdr->Signature)&0xFFF0) == 0x2300 || \
+ (le16_to_cpu(_pFwHdr->Signature)&0xFFF0) == 0x88E0)
+
+/* This structure must be careful with byte-ordering */
+
+struct rt_firmware_hdr {
+ /* 8-byte alinment required */
+ /* LONG WORD 0 ---- */
+ __le16 Signature; /* 92C0: test chip; 92C,
+ * 88C0: test chip; 88C1: MP A-cut;
+ * 92C1: MP A-cut */
+ u8 Category; /* AP/NIC and USB/PCI */
+ u8 Function; /* Reserved for different FW function
+ * indcation, for further use when
+ * driver needs to download different
+ * FW for different conditions */
+ __le16 Version; /* FW Version */
+ u8 Subversion; /* FW Subversion, default 0x00 */
+ u16 Rsvd1;
+
+ /* LONG WORD 1 ---- */
+ u8 Month; /* Release time Month field */
+ u8 Date; /* Release time Date field */
+ u8 Hour; /* Release time Hour field */
+ u8 Minute; /* Release time Minute field */
+ __le16 RamCodeSize; /* The size of RAM code */
+ u8 Foundry;
+ u8 Rsvd2;
+
+ /* LONG WORD 2 ---- */
+ __le32 SvnIdx; /* The SVN entry index */
+ u32 Rsvd3;
+
+ /* LONG WORD 3 ---- */
+ u32 Rsvd4;
+ u32 Rsvd5;
+};
+
+#define DRIVER_EARLY_INT_TIME 0x05
+#define BCN_DMA_ATIME_INT_TIME 0x02
+
+enum usb_rx_agg_mode {
+ USB_RX_AGG_DISABLE,
+ USB_RX_AGG_DMA,
+ USB_RX_AGG_USB,
+ USB_RX_AGG_MIX
+};
+
+#define MAX_RX_DMA_BUFFER_SIZE_88E \
+ 0x2400 /* 9k for 88E nornal chip , MaxRxBuff=10k-max(TxReportSize(64*8),
+ * WOLPattern(16*24)) */
+
+#define MAX_TX_REPORT_BUFFER_SIZE 0x0400 /* 1k */
+
+/* BK, BE, VI, VO, HCCA, MANAGEMENT, COMMAND, HIGH, BEACON. */
+#define MAX_TX_QUEUE 9
+
+#define TX_SELE_HQ BIT(0) /* High Queue */
+#define TX_SELE_LQ BIT(1) /* Low Queue */
+#define TX_SELE_NQ BIT(2) /* Normal Queue */
+
+/* Note: We will divide number of page equally for each queue other
+ * than public queue! */
+/* 22k = 22528 bytes = 176 pages (@page = 128 bytes) */
+/* must reserved about 7 pages for LPS => 176-7 = 169 (0xA9) */
+/* 2*BCN / 1*ps-poll / 1*null-data /1*prob_rsp /1*QOS null-data /1*BT QOS
+ * null-data */
+
+#define TX_TOTAL_PAGE_NUMBER_88E 0xA9/* 169 (21632=> 21k) */
+
+#define TX_PAGE_BOUNDARY_88E (TX_TOTAL_PAGE_NUMBER_88E + 1)
+
+/* Note: For Normal Chip Setting ,modify later */
+#define WMM_NORMAL_TX_TOTAL_PAGE_NUMBER \
+ TX_TOTAL_PAGE_NUMBER_88E /* 0xA9 , 0xb0=>176=>22k */
+#define WMM_NORMAL_TX_PAGE_BOUNDARY_88E \
+ (WMM_NORMAL_TX_TOTAL_PAGE_NUMBER + 1) /* 0xA9 */
+
+/* Chip specific */
+#define CHIP_BONDING_IDENTIFIER(_value) (((_value)>>22)&0x3)
+#define CHIP_BONDING_92C_1T2R 0x1
+#define CHIP_BONDING_88C_USB_MCARD 0x2
+#define CHIP_BONDING_88C_USB_HP 0x1
+#include "HalVerDef.h"
+#include "hal_com.h"
+
+/* Channel Plan */
+enum ChannelPlan {
+ CHPL_FCC = 0,
+ CHPL_IC = 1,
+ CHPL_ETSI = 2,
+ CHPL_SPA = 3,
+ CHPL_FRANCE = 4,
+ CHPL_MKK = 5,
+ CHPL_MKK1 = 6,
+ CHPL_ISRAEL = 7,
+ CHPL_TELEC = 8,
+ CHPL_GLOBAL = 9,
+ CHPL_WORLD = 10,
+};
+
+struct txpowerinfo24g {
+ u8 IndexCCK_Base[RF_PATH_MAX][MAX_CHNL_GROUP_24G];
+ u8 IndexBW40_Base[RF_PATH_MAX][MAX_CHNL_GROUP_24G];
+ /* If only one tx, only BW20 and OFDM are used. */
+ s8 CCK_Diff[RF_PATH_MAX][MAX_TX_COUNT];
+ s8 OFDM_Diff[RF_PATH_MAX][MAX_TX_COUNT];
+ s8 BW20_Diff[RF_PATH_MAX][MAX_TX_COUNT];
+ s8 BW40_Diff[RF_PATH_MAX][MAX_TX_COUNT];
+};
+
+#define EFUSE_REAL_CONTENT_LEN 512
+#define EFUSE_MAX_SECTION 16
+#define EFUSE_IC_ID_OFFSET 506 /* For some inferior IC purpose*/
+#define AVAILABLE_EFUSE_ADDR(addr) (addr < EFUSE_REAL_CONTENT_LEN)
+/* To prevent out of boundary programming case, */
+/* leave 1byte and program full section */
+/* 9bytes + 1byt + 5bytes and pre 1byte. */
+/* For worst case: */
+/* | 1byte|----8bytes----|1byte|--5bytes--| */
+/* | | Reserved(14bytes) | */
+
+/* PG data exclude header, dummy 6 bytes frome CP test and reserved 1byte. */
+#define EFUSE_OOB_PROTECT_BYTES 15
+
+#define HWSET_MAX_SIZE_88E 512
+
+#define EFUSE_REAL_CONTENT_LEN_88E 256
+#define EFUSE_MAP_LEN_88E 512
+#define EFUSE_MAP_LEN EFUSE_MAP_LEN_88E
+#define EFUSE_MAX_SECTION_88E 64
+#define EFUSE_MAX_WORD_UNIT_88E 4
+#define EFUSE_IC_ID_OFFSET_88E 506
+#define AVAILABLE_EFUSE_ADDR_88E(addr) \
+ (addr < EFUSE_REAL_CONTENT_LEN_88E)
+/* To prevent out of boundary programming case, leave 1byte and program
+ * full section */
+/* 9bytes + 1byt + 5bytes and pre 1byte. */
+/* For worst case: */
+/* | 2byte|----8bytes----|1byte|--7bytes--| 92D */
+/* PG data exclude header, dummy 7 bytes frome CP test and reserved 1byte. */
+#define EFUSE_OOB_PROTECT_BYTES_88E 18
+#define EFUSE_PROTECT_BYTES_BANK_88E 16
+
+/* EFUSE for BT definition */
+#define EFUSE_BT_REAL_CONTENT_LEN 1536 /* 512*3 */
+#define EFUSE_BT_MAP_LEN 1024 /* 1k bytes */
+#define EFUSE_BT_MAX_SECTION 128 /* 1024/8 */
+
+#define EFUSE_PROTECT_BYTES_BANK 16
+
+/* For RTL8723 WiFi/BT/GPS multi-function configuration. */
+enum rt_multi_func {
+ RT_MULTI_FUNC_NONE = 0x00,
+ RT_MULTI_FUNC_WIFI = 0x01,
+ RT_MULTI_FUNC_BT = 0x02,
+ RT_MULTI_FUNC_GPS = 0x04,
+};
+
+/* For RTL8723 regulator mode. */
+enum rt_regulator_mode {
+ RT_SWITCHING_REGULATOR = 0,
+ RT_LDO_REGULATOR = 1,
+};
+
+struct hal_data_8188e {
+ struct HAL_VERSION VersionID;
+ enum rt_multi_func MultiFunc; /* For multi-function consideration. */
+ enum rt_regulator_mode RegulatorMode; /* switching regulator or LDO */
+ u16 CustomerID;
+
+ u16 FirmwareVersion;
+ u16 FirmwareVersionRev;
+ u16 FirmwareSubVersion;
+ u16 FirmwareSignature;
+ u8 PGMaxGroup;
+ /* current WIFI_PHY values */
+ u32 ReceiveConfig;
+ enum wireless_mode CurrentWirelessMode;
+ enum ht_channel_width CurrentChannelBW;
+ u8 CurrentChannel;
+ u8 nCur40MhzPrimeSC;/* Control channel sub-carrier */
+
+ u16 BasicRateSet;
+
+ /* rf_ctrl */
+ u8 rf_chip;
+ u8 rf_type;
+ u8 NumTotalRFPath;
+
+ u8 BoardType;
+
+ /* EEPROM setting. */
+ u16 EEPROMVID;
+ u16 EEPROMPID;
+ u16 EEPROMSVID;
+ u16 EEPROMSDID;
+ u8 EEPROMCustomerID;
+ u8 EEPROMSubCustomerID;
+ u8 EEPROMVersion;
+ u8 EEPROMRegulatory;
+
+ u8 bTXPowerDataReadFromEEPORM;
+ u8 EEPROMThermalMeter;
+ u8 bAPKThermalMeterIgnore;
+
+ bool EepromOrEfuse;
+ /* 92C:256bytes, 88E:512bytes, we use union set (512bytes) */
+ u8 EfuseMap[2][HWSET_MAX_SIZE_512];
+ u8 EfuseUsedPercentage;
+ struct efuse_hal EfuseHal;
+
+ u8 Index24G_CCK_Base[RF_PATH_MAX][CHANNEL_MAX_NUMBER];
+ u8 Index24G_BW40_Base[RF_PATH_MAX][CHANNEL_MAX_NUMBER];
+ /* If only one tx, only BW20 and OFDM are used. */
+ s8 CCK_24G_Diff[RF_PATH_MAX][MAX_TX_COUNT];
+ s8 OFDM_24G_Diff[RF_PATH_MAX][MAX_TX_COUNT];
+ s8 BW20_24G_Diff[RF_PATH_MAX][MAX_TX_COUNT];
+ s8 BW40_24G_Diff[RF_PATH_MAX][MAX_TX_COUNT];
+
+ u8 TxPwrLevelCck[RF_PATH_MAX][CHANNEL_MAX_NUMBER];
+ /* For HT 40MHZ pwr */
+ u8 TxPwrLevelHT40_1S[RF_PATH_MAX][CHANNEL_MAX_NUMBER];
+ /* For HT 40MHZ pwr */
+ u8 TxPwrLevelHT40_2S[RF_PATH_MAX][CHANNEL_MAX_NUMBER];
+ /* HT 20<->40 Pwr diff */
+ u8 TxPwrHt20Diff[RF_PATH_MAX][CHANNEL_MAX_NUMBER];
+ /* For HT<->legacy pwr diff */
+ u8 TxPwrLegacyHtDiff[RF_PATH_MAX][CHANNEL_MAX_NUMBER];
+ /* For power group */
+ u8 PwrGroupHT20[RF_PATH_MAX][CHANNEL_MAX_NUMBER];
+ u8 PwrGroupHT40[RF_PATH_MAX][CHANNEL_MAX_NUMBER];
+
+ u8 LegacyHTTxPowerDiff;/* Legacy to HT rate power diff */
+ /* The current Tx Power Level */
+ u8 CurrentCckTxPwrIdx;
+ u8 CurrentOfdm24GTxPwrIdx;
+ u8 CurrentBW2024GTxPwrIdx;
+ u8 CurrentBW4024GTxPwrIdx;
+
+ /* Read/write are allow for following hardware information variables */
+ u8 framesync;
+ u32 framesyncC34;
+ u8 framesyncMonitor;
+ u8 DefaultInitialGain[4];
+ u8 pwrGroupCnt;
+ u32 MCSTxPowerLevelOriginalOffset[MAX_PG_GROUP][16];
+ u32 CCKTxPowerLevelOriginalOffset;
+
+ u8 CrystalCap;
+ u32 AntennaTxPath; /* Antenna path Tx */
+ u32 AntennaRxPath; /* Antenna path Rx */
+ u8 BluetoothCoexist;
+ u8 ExternalPA;
+
+ u8 bLedOpenDrain; /* Open-drain support for controlling the LED.*/
+
+ u8 b1x1RecvCombine; /* for 1T1R receive combining */
+
+ u32 AcParam_BE; /* Original parameter for BE, use for EDCA turbo. */
+
+ struct bb_reg_def PHYRegDef[4]; /* Radio A/B/C/D */
+
+ u32 RfRegChnlVal[2];
+
+ /* RDG enable */
+ bool bRDGEnable;
+
+ /* for host message to fw */
+ u8 LastHMEBoxNum;
+
+ u8 fw_ractrl;
+ u8 RegTxPause;
+ /* Beacon function related global variable. */
+ u32 RegBcnCtrlVal;
+ u8 RegFwHwTxQCtrl;
+ u8 RegReg542;
+ u8 RegCR_1;
+
+ struct dm_priv dmpriv;
+ struct odm_dm_struct odmpriv;
+ struct sreset_priv srestpriv;
+
+ u8 CurAntenna;
+ u8 AntDivCfg;
+ u8 TRxAntDivType;
+
+ u8 bDumpRxPkt;/* for debug */
+ u8 bDumpTxPkt;/* for debug */
+ u8 FwRsvdPageStartOffset; /* Reserve page start offset except
+ * beacon in TxQ. */
+
+ /* 2010/08/09 MH Add CU power down mode. */
+ bool pwrdown;
+
+ /* Add for dual MAC 0--Mac0 1--Mac1 */
+ u32 interfaceIndex;
+
+ u8 OutEpQueueSel;
+ u8 OutEpNumber;
+
+ /* Add for USB aggreation mode dynamic shceme. */
+ bool UsbRxHighSpeedMode;
+
+ /* 2010/11/22 MH Add for slim combo debug mode selective. */
+ /* This is used for fix the drawback of CU TSMC-A/UMC-A cut.
+ * HW auto suspend ability. Close BT clock. */
+ bool SlimComboDbg;
+
+ u16 EfuseUsedBytes;
+
+#ifdef CONFIG_88EU_P2P
+ struct P2P_PS_Offload_t p2p_ps_offload;
+#endif
+
+ /* Auto FSM to Turn On, include clock, isolation, power control
+ * for MAC only */
+ u8 bMacPwrCtrlOn;
+
+ u32 UsbBulkOutSize;
+
+ /* Interrupt relatd register information. */
+ u32 IntArray[3];/* HISR0,HISR1,HSISR */
+ u32 IntrMask[3];
+ u8 C2hArray[16];
+ u8 UsbTxAggMode;
+ u8 UsbTxAggDescNum;
+ u16 HwRxPageSize; /* Hardware setting */
+ u32 MaxUsbRxAggBlock;
+
+ enum usb_rx_agg_mode UsbRxAggMode;
+ u8 UsbRxAggBlockCount; /* USB Block count. Block size is
+ * 512-byte in high speed and 64-byte
+ * in full speed */
+ u8 UsbRxAggBlockTimeout;
+ u8 UsbRxAggPageCount; /* 8192C DMA page count */
+ u8 UsbRxAggPageTimeout;
+};
+
+#define GET_HAL_DATA(__pAdapter) \
+ ((struct hal_data_8188e *)((__pAdapter)->HalData))
+#define GET_RF_TYPE(priv) (GET_HAL_DATA(priv)->rf_type)
+
+#define INCLUDE_MULTI_FUNC_BT(_Adapter) \
+ (GET_HAL_DATA(_Adapter)->MultiFunc & RT_MULTI_FUNC_BT)
+#define INCLUDE_MULTI_FUNC_GPS(_Adapter) \
+ (GET_HAL_DATA(_Adapter)->MultiFunc & RT_MULTI_FUNC_GPS)
+
+/* rtl8188e_hal_init.c */
+s32 rtl8188e_FirmwareDownload(struct adapter *padapter);
+void _8051Reset88E(struct adapter *padapter);
+void rtl8188e_InitializeFirmwareVars(struct adapter *padapter);
+
+s32 InitLLTTable(struct adapter *padapter, u8 txpktbuf_bndy);
+
+/* EFuse */
+u8 GetEEPROMSize8188E(struct adapter *padapter);
+void Hal_InitPGData88E(struct adapter *padapter);
+void Hal_EfuseParseIDCode88E(struct adapter *padapter, u8 *hwinfo);
+void Hal_ReadTxPowerInfo88E(struct adapter *padapter, u8 *hwinfo,
+ bool AutoLoadFail);
+
+void Hal_EfuseParseEEPROMVer88E(struct adapter *padapter, u8 *hwinfo,
+ bool AutoLoadFail);
+void rtl8188e_EfuseParseChnlPlan(struct adapter *padapter, u8 *hwinfo,
+ bool AutoLoadFail);
+void Hal_EfuseParseCustomerID88E(struct adapter *padapter, u8 *hwinfo,
+ bool AutoLoadFail);
+void Hal_ReadAntennaDiversity88E(struct adapter *pAdapter,u8 *PROMContent,
+ bool AutoLoadFail);
+void Hal_ReadThermalMeter_88E(struct adapter * dapter, u8 *PROMContent,
+ bool AutoloadFail);
+void Hal_EfuseParseXtal_8188E(struct adapter *pAdapter, u8 *hwinfo,
+ bool AutoLoadFail);
+void Hal_EfuseParseBoardType88E(struct adapter *pAdapter, u8 *hwinfo,
+ bool AutoLoadFail);
+void Hal_ReadPowerSavingMode88E(struct adapter *pAdapter, u8 *hwinfo,
+ bool AutoLoadFail);
+
+bool HalDetectPwrDownMode88E(struct adapter *Adapter);
+
+void Hal_InitChannelPlan(struct adapter *padapter);
+void rtl8188e_set_hal_ops(struct hal_ops *pHalFunc);
+
+/* register */
+void SetBcnCtrlReg(struct adapter *padapter, u8 SetBits, u8 ClearBits);
+
+void rtl8188e_clone_haldata(struct adapter *dst, struct adapter *src);
+void rtl8188e_start_thread(struct adapter *padapter);
+void rtl8188e_stop_thread(struct adapter *padapter);
+
+void rtw_IOL_cmd_tx_pkt_buf_dump(struct adapter *Adapter, int len);
+s32 rtl8188e_iol_efuse_patch(struct adapter *padapter);
+void rtw_cancel_all_timer(struct adapter *padapter);
+void _ps_open_RF(struct adapter *adapt);
+
+#endif /* __RTL8188E_HAL_H__ */
diff --git a/drivers/staging/r8188eu/include/rtl8188e_led.h b/drivers/staging/r8188eu/include/rtl8188e_led.h
new file mode 100644
index 000000000000..9cb03d6565d3
--- /dev/null
+++ b/drivers/staging/r8188eu/include/rtl8188e_led.h
@@ -0,0 +1,34 @@
+/******************************************************************************
+ *
+ * Copyright(c) 2007 - 2011 Realtek Corporation. All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of version 2 of the GNU General Public License as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
+ * more details.
+ *
+ * You should have received a copy of the GNU General Public License along with
+ * this program; if not, write to the Free Software Foundation, Inc.,
+ * 51 Franklin Street, Fifth Floor, Boston, MA 02110, USA
+ *
+ *
+ ******************************************************************************/
+#ifndef __RTL8188E_LED_H__
+#define __RTL8188E_LED_H__
+
+#include <osdep_service.h>
+#include <drv_types.h>
+
+/* */
+/* Interface to manipulate LED objects. */
+/* */
+void rtl8188eu_InitSwLeds(struct adapter *padapter);
+void rtl8188eu_DeInitSwLeds(struct adapter *padapter);
+void SwLedOn(struct adapter *padapter, struct LED_871x *pLed);
+void SwLedOff(struct adapter *padapter, struct LED_871x *pLed);
+
+#endif
diff --git a/drivers/staging/r8188eu/include/rtl8188e_recv.h b/drivers/staging/r8188eu/include/rtl8188e_recv.h
new file mode 100644
index 000000000000..e2ef281c2c44
--- /dev/null
+++ b/drivers/staging/r8188eu/include/rtl8188e_recv.h
@@ -0,0 +1,69 @@
+/******************************************************************************
+ *
+ * Copyright(c) 2007 - 2011 Realtek Corporation. All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of version 2 of the GNU General Public License as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
+ * more details.
+ *
+ * You should have received a copy of the GNU General Public License along with
+ * this program; if not, write to the Free Software Foundation, Inc.,
+ * 51 Franklin Street, Fifth Floor, Boston, MA 02110, USA
+ *
+ *
+ ******************************************************************************/
+#ifndef __RTL8188E_RECV_H__
+#define __RTL8188E_RECV_H__
+
+#define TX_RPT1_PKT_LEN 8
+
+#define RECV_BLK_SZ 512
+#define RECV_BLK_CNT 16
+#define RECV_BLK_TH RECV_BLK_CNT
+#define RECV_BULK_IN_ADDR 0x80
+#define RECV_INT_IN_ADDR 0x81
+
+#define NR_PREALLOC_RECV_SKB (8)
+
+#define NR_RECVBUFF (4)
+
+#define MAX_RECVBUF_SZ (15360) /* 15k < 16k */
+
+struct phy_stat {
+ unsigned int phydw0;
+ unsigned int phydw1;
+ unsigned int phydw2;
+ unsigned int phydw3;
+ unsigned int phydw4;
+ unsigned int phydw5;
+ unsigned int phydw6;
+ unsigned int phydw7;
+};
+
+/* Rx smooth factor */
+#define Rx_Smooth_Factor (20)
+
+enum rx_packet_type {
+ NORMAL_RX,/* Normal rx packet */
+ TX_REPORT1,/* CCX */
+ TX_REPORT2,/* TX RPT */
+ HIS_REPORT,/* USB HISR RPT */
+};
+
+#define INTERRUPT_MSG_FORMAT_LEN 60
+void rtl8188eu_init_recvbuf(struct adapter *padapter, struct recv_buf *buf);
+s32 rtl8188eu_init_recv_priv(struct adapter *padapter);
+void rtl8188eu_free_recv_priv(struct adapter * padapter);
+void rtl8188eu_recv_hdl(struct adapter * padapter, struct recv_buf *precvbuf);
+void rtl8188eu_recv_tasklet(void *priv);
+void rtl8188e_query_rx_phy_status(struct recv_frame *fr, struct phy_stat *phy);
+void rtl8188e_process_phy_info(struct adapter * padapter, void *prframe);
+void update_recvframe_phyinfo_88e(struct recv_frame *fra, struct phy_stat *phy);
+void update_recvframe_attrib_88e(struct recv_frame *fra, struct recv_stat *stat);
+
+#endif
diff --git a/drivers/staging/r8188eu/include/rtl8188e_rf.h b/drivers/staging/r8188eu/include/rtl8188e_rf.h
new file mode 100644
index 000000000000..0ebdc369b542
--- /dev/null
+++ b/drivers/staging/r8188eu/include/rtl8188e_rf.h
@@ -0,0 +1,35 @@
+/******************************************************************************
+ *
+ * Copyright(c) 2007 - 2011 Realtek Corporation. All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of version 2 of the GNU General Public License as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
+ * more details.
+ *
+ * You should have received a copy of the GNU General Public License along with
+ * this program; if not, write to the Free Software Foundation, Inc.,
+ * 51 Franklin Street, Fifth Floor, Boston, MA 02110, USA
+ *
+ *
+ ******************************************************************************/
+#ifndef __RTL8188E_RF_H__
+#define __RTL8188E_RF_H__
+
+#define RF6052_MAX_TX_PWR 0x3F
+#define RF6052_MAX_REG 0x3F
+#define RF6052_MAX_PATH 2
+
+int PHY_RF6052_Config8188E(struct adapter *Adapter);
+void rtl8188e_RF_ChangeTxPath(struct adapter *Adapter, u16 DataRate);
+void rtl8188e_PHY_RF6052SetBandwidth(struct adapter *Adapter,
+ enum ht_channel_width Bandwidth);
+void rtl8188e_PHY_RF6052SetCckTxPower(struct adapter *Adapter, u8 *level);
+void rtl8188e_PHY_RF6052SetOFDMTxPower(struct adapter *Adapter, u8 *ofdm,
+ u8 *pwrbw20, u8 *pwrbw40, u8 channel);
+
+#endif/* __RTL8188E_RF_H__ */
diff --git a/drivers/staging/r8188eu/include/rtl8188e_spec.h b/drivers/staging/r8188eu/include/rtl8188e_spec.h
new file mode 100644
index 000000000000..3956f770a951
--- /dev/null
+++ b/drivers/staging/r8188eu/include/rtl8188e_spec.h
@@ -0,0 +1,1438 @@
+/******************************************************************************
+ *
+ * Copyright(c) 2007 - 2011 Realtek Corporation. All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of version 2 of the GNU General Public License as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
+ * more details.
+ *
+ * You should have received a copy of the GNU General Public License along with
+ * this program; if not, write to the Free Software Foundation, Inc.,
+ * 51 Franklin Street, Fifth Floor, Boston, MA 02110, USA
+ *
+ *******************************************************************************/
+#ifndef __RTL8188E_SPEC_H__
+#define __RTL8188E_SPEC_H__
+
+#ifndef BIT
+#define BIT(x) (1 << (x))
+#endif
+
+#define BIT0 0x00000001
+#define BIT1 0x00000002
+#define BIT2 0x00000004
+#define BIT3 0x00000008
+#define BIT4 0x00000010
+#define BIT5 0x00000020
+#define BIT6 0x00000040
+#define BIT7 0x00000080
+#define BIT8 0x00000100
+#define BIT9 0x00000200
+#define BIT10 0x00000400
+#define BIT11 0x00000800
+#define BIT12 0x00001000
+#define BIT13 0x00002000
+#define BIT14 0x00004000
+#define BIT15 0x00008000
+#define BIT16 0x00010000
+#define BIT17 0x00020000
+#define BIT18 0x00040000
+#define BIT19 0x00080000
+#define BIT20 0x00100000
+#define BIT21 0x00200000
+#define BIT22 0x00400000
+#define BIT23 0x00800000
+#define BIT24 0x01000000
+#define BIT25 0x02000000
+#define BIT26 0x04000000
+#define BIT27 0x08000000
+#define BIT28 0x10000000
+#define BIT29 0x20000000
+#define BIT30 0x40000000
+#define BIT31 0x80000000
+
+/* 8192C Regsiter offset definition */
+
+#define HAL_PS_TIMER_INT_DELAY 50 /* 50 microseconds */
+#define HAL_92C_NAV_UPPER_UNIT 128 /* micro-second */
+
+#define MAC_ADDR_LEN 6
+/* 8188E PKT_BUFF_ACCESS_CTRL value */
+#define TXPKT_BUF_SELECT 0x69
+#define RXPKT_BUF_SELECT 0xA5
+#define DISABLE_TRXPKT_BUF_ACCESS 0x0
+
+/* 0x0000h ~ 0x00FFh System Configuration */
+#define REG_SYS_ISO_CTRL 0x0000
+#define REG_SYS_FUNC_EN 0x0002
+#define REG_APS_FSMCO 0x0004
+#define REG_SYS_CLKR 0x0008
+#define REG_9346CR 0x000A
+#define REG_EE_VPD 0x000C
+#define REG_AFE_MISC 0x0010
+#define REG_SPS0_CTRL 0x0011
+#define REG_SPS_OCP_CFG 0x0018
+#define REG_RSV_CTRL 0x001C
+#define REG_RF_CTRL 0x001F
+#define REG_LDOA15_CTRL 0x0020
+#define REG_LDOV12D_CTRL 0x0021
+#define REG_LDOHCI12_CTRL 0x0022
+#define REG_LPLDO_CTRL 0x0023
+#define REG_AFE_XTAL_CTRL 0x0024
+#define REG_AFE_PLL_CTRL 0x0028
+#define REG_APE_PLL_CTRL_EXT 0x002c
+#define REG_EFUSE_CTRL 0x0030
+#define REG_EFUSE_TEST 0x0034
+#define REG_GPIO_MUXCFG 0x0040
+#define REG_GPIO_IO_SEL 0x0042
+#define REG_MAC_PINMUX_CFG 0x0043
+#define REG_GPIO_PIN_CTRL 0x0044
+#define REG_GPIO_INTM 0x0048
+#define REG_LEDCFG0 0x004C
+#define REG_LEDCFG1 0x004D
+#define REG_LEDCFG2 0x004E
+#define REG_LEDCFG3 0x004F
+#define REG_FSIMR 0x0050
+#define REG_FSISR 0x0054
+#define REG_HSIMR 0x0058
+#define REG_HSISR 0x005c
+#define REG_GPIO_PIN_CTRL_2 0x0060 /* RTL8723 WIFI/BT/GPS
+ * Multi-Function GPIO Pin Control. */
+#define REG_GPIO_IO_SEL_2 0x0062 /* RTL8723 WIFI/BT/GPS
+ * Multi-Function GPIO Select. */
+#define REG_BB_PAD_CTRL 0x0064
+#define REG_MULTI_FUNC_CTRL 0x0068 /* RTL8723 WIFI/BT/GPS
+ * Multi-Function control source. */
+#define REG_GPIO_OUTPUT 0x006c
+#define REG_AFE_XTAL_CTRL_EXT 0x0078 /* RTL8188E */
+#define REG_XCK_OUT_CTRL 0x007c /* RTL8188E */
+#define REG_MCUFWDL 0x0080
+#define REG_WOL_EVENT 0x0081 /* RTL8188E */
+#define REG_MCUTSTCFG 0x0084
+#define REG_HMEBOX_E0 0x0088
+#define REG_HMEBOX_E1 0x008A
+#define REG_HMEBOX_E2 0x008C
+#define REG_HMEBOX_E3 0x008E
+#define REG_HMEBOX_EXT_0 0x01F0
+#define REG_HMEBOX_EXT_1 0x01F4
+#define REG_HMEBOX_EXT_2 0x01F8
+#define REG_HMEBOX_EXT_3 0x01FC
+#define REG_HIMR_88E 0x00B0
+#define REG_HISR_88E 0x00B4
+#define REG_HIMRE_88E 0x00B8
+#define REG_HISRE_88E 0x00BC
+#define REG_EFUSE_ACCESS 0x00CF /* Efuse access protection
+ * for RTL8723 */
+#define REG_BIST_SCAN 0x00D0
+#define REG_BIST_RPT 0x00D4
+#define REG_BIST_ROM_RPT 0x00D8
+#define REG_USB_SIE_INTF 0x00E0
+#define REG_PCIE_MIO_INTF 0x00E4
+#define REG_PCIE_MIO_INTD 0x00E8
+#define REG_HPON_FSM 0x00EC
+#define REG_SYS_CFG 0x00F0
+#define REG_GPIO_OUTSTS 0x00F4 /* For RTL8723 only. */
+#define REG_TYPE_ID 0x00FC
+
+#define REG_MAC_PHY_CTRL_NORMAL 0x00f8
+
+/* 0x0100h ~ 0x01FFh MACTOP General Configuration */
+#define REG_CR 0x0100
+#define REG_PBP 0x0104
+#define REG_PKT_BUFF_ACCESS_CTRL 0x0106
+#define REG_TRXDMA_CTRL 0x010C
+#define REG_TRXFF_BNDY 0x0114
+#define REG_TRXFF_STATUS 0x0118
+#define REG_RXFF_PTR 0x011C
+/* define REG_HIMR 0x0120 */
+/* define REG_HISR 0x0124 */
+#define REG_HIMRE 0x0128
+#define REG_HISRE 0x012C
+#define REG_CPWM 0x012F
+#define REG_FWIMR 0x0130
+#define REG_FTIMR 0x0138
+#define REG_FWISR 0x0134
+#define REG_PKTBUF_DBG_CTRL 0x0140
+#define REG_PKTBUF_DBG_ADDR (REG_PKTBUF_DBG_CTRL)
+#define REG_RXPKTBUF_DBG (REG_PKTBUF_DBG_CTRL+2)
+#define REG_TXPKTBUF_DBG (REG_PKTBUF_DBG_CTRL+3)
+#define REG_RXPKTBUF_CTRL (REG_PKTBUF_DBG_CTRL+2)
+#define REG_PKTBUF_DBG_DATA_L 0x0144
+#define REG_PKTBUF_DBG_DATA_H 0x0148
+
+#define REG_TC0_CTRL 0x0150
+#define REG_TC1_CTRL 0x0154
+#define REG_TC2_CTRL 0x0158
+#define REG_TC3_CTRL 0x015C
+#define REG_TC4_CTRL 0x0160
+#define REG_TCUNIT_BASE 0x0164
+#define REG_MBIST_START 0x0174
+#define REG_MBIST_DONE 0x0178
+#define REG_MBIST_FAIL 0x017C
+#define REG_32K_CTRL 0x0194 /* RTL8188E */
+#define REG_C2HEVT_MSG_NORMAL 0x01A0
+#define REG_C2HEVT_CLEAR 0x01AF
+#define REG_MCUTST_1 0x01c0
+#define REG_FMETHR 0x01C8
+#define REG_HMETFR 0x01CC
+#define REG_HMEBOX_0 0x01D0
+#define REG_HMEBOX_1 0x01D4
+#define REG_HMEBOX_2 0x01D8
+#define REG_HMEBOX_3 0x01DC
+
+#define REG_LLT_INIT 0x01E0
+
+/* 0x0200h ~ 0x027Fh TXDMA Configuration */
+#define REG_RQPN 0x0200
+#define REG_FIFOPAGE 0x0204
+#define REG_TDECTRL 0x0208
+#define REG_TXDMA_OFFSET_CHK 0x020C
+#define REG_TXDMA_STATUS 0x0210
+#define REG_RQPN_NPQ 0x0214
+
+/* 0x0280h ~ 0x02FFh RXDMA Configuration */
+#define REG_RXDMA_AGG_PG_TH 0x0280
+#define REG_RXPKT_NUM 0x0284
+#define REG_RXDMA_STATUS 0x0288
+
+/* 0x0300h ~ 0x03FFh PCIe */
+#define REG_PCIE_CTRL_REG 0x0300
+#define REG_INT_MIG 0x0304 /* Interrupt Migration */
+#define REG_BCNQ_DESA 0x0308 /* TX Beacon Descr Address */
+#define REG_HQ_DESA 0x0310 /* TX High Queue Descr Addr */
+#define REG_MGQ_DESA 0x0318 /* TX Manage Queue Descr Addr*/
+#define REG_VOQ_DESA 0x0320 /* TX VO Queue Descr Addr */
+#define REG_VIQ_DESA 0x0328 /* TX VI Queue Descr Addr */
+#define REG_BEQ_DESA 0x0330 /* TX BE Queue Descr Addr */
+#define REG_BKQ_DESA 0x0338 /* TX BK Queue Descr Addr */
+#define REG_RX_DESA 0x0340 /* RX Queue Descr Addr */
+#define REG_MDIO 0x0354 /* MDIO for Access PCIE PHY */
+#define REG_DBG_SEL 0x0360 /* Debug Selection Register */
+#define REG_PCIE_HRPWM 0x0361 /* PCIe RPWM */
+#define REG_PCIE_HCPWM 0x0363 /* PCIe CPWM */
+#define REG_WATCH_DOG 0x0368
+
+/* RTL8723 series ------------------------------ */
+#define REG_PCIE_HISR 0x03A0
+
+/* spec version 11 */
+/* 0x0400h ~ 0x047Fh Protocol Configuration */
+#define REG_VOQ_INFORMATION 0x0400
+#define REG_VIQ_INFORMATION 0x0404
+#define REG_BEQ_INFORMATION 0x0408
+#define REG_BKQ_INFORMATION 0x040C
+#define REG_MGQ_INFORMATION 0x0410
+#define REG_HGQ_INFORMATION 0x0414
+#define REG_BCNQ_INFORMATION 0x0418
+#define REG_TXPKT_EMPTY 0x041A
+
+#define REG_CPU_MGQ_INFORMATION 0x041C
+#define REG_FWHW_TXQ_CTRL 0x0420
+#define REG_HWSEQ_CTRL 0x0423
+#define REG_TXPKTBUF_BCNQ_BDNY 0x0424
+#define REG_TXPKTBUF_MGQ_BDNY 0x0425
+#define REG_LIFETIME_EN 0x0426
+#define REG_MULTI_BCNQ_OFFSET 0x0427
+#define REG_SPEC_SIFS 0x0428
+#define REG_RL 0x042A
+#define REG_DARFRC 0x0430
+#define REG_RARFRC 0x0438
+#define REG_RRSR 0x0440
+#define REG_ARFR0 0x0444
+#define REG_ARFR1 0x0448
+#define REG_ARFR2 0x044C
+#define REG_ARFR3 0x0450
+#define REG_AGGLEN_LMT 0x0458
+#define REG_AMPDU_MIN_SPACE 0x045C
+#define REG_TXPKTBUF_WMAC_LBK_BF_HD 0x045D
+#define REG_FAST_EDCA_CTRL 0x0460
+#define REG_RD_RESP_PKT_TH 0x0463
+#define REG_INIRTS_RATE_SEL 0x0480
+/* define REG_INIDATA_RATE_SEL 0x0484 */
+#define REG_POWER_STATUS 0x04A4
+#define REG_POWER_STAGE1 0x04B4
+#define REG_POWER_STAGE2 0x04B8
+#define REG_PKT_VO_VI_LIFE_TIME 0x04C0
+#define REG_PKT_BE_BK_LIFE_TIME 0x04C2
+#define REG_STBC_SETTING 0x04C4
+#define REG_PROT_MODE_CTRL 0x04C8
+#define REG_MAX_AGGR_NUM 0x04CA
+#define REG_RTS_MAX_AGGR_NUM 0x04CB
+#define REG_BAR_MODE_CTRL 0x04CC
+#define REG_RA_TRY_RATE_AGG_LMT 0x04CF
+#define REG_EARLY_MODE_CONTROL 0x4D0
+#define REG_NQOS_SEQ 0x04DC
+#define REG_QOS_SEQ 0x04DE
+#define REG_NEED_CPU_HANDLE 0x04E0
+#define REG_PKT_LOSE_RPT 0x04E1
+#define REG_PTCL_ERR_STATUS 0x04E2
+#define REG_TX_RPT_CTRL 0x04EC
+#define REG_TX_RPT_TIME 0x04F0 /* 2 byte */
+#define REG_DUMMY 0x04FC
+
+/* 0x0500h ~ 0x05FFh EDCA Configuration */
+#define REG_EDCA_VO_PARAM 0x0500
+#define REG_EDCA_VI_PARAM 0x0504
+#define REG_EDCA_BE_PARAM 0x0508
+#define REG_EDCA_BK_PARAM 0x050C
+#define REG_BCNTCFG 0x0510
+#define REG_PIFS 0x0512
+#define REG_RDG_PIFS 0x0513
+#define REG_SIFS_CTX 0x0514
+#define REG_SIFS_TRX 0x0516
+#define REG_TSFTR_SYN_OFFSET 0x0518
+#define REG_AGGR_BREAK_TIME 0x051A
+#define REG_SLOT 0x051B
+#define REG_TX_PTCL_CTRL 0x0520
+#define REG_TXPAUSE 0x0522
+#define REG_DIS_TXREQ_CLR 0x0523
+#define REG_RD_CTRL 0x0524
+/* Format for offset 540h-542h: */
+/* [3:0]: TBTT prohibit setup in unit of 32us. The time for HW getting
+ * beacon content before TBTT. */
+/* [7:4]: Reserved. */
+/* [19:8]: TBTT prohibit hold in unit of 32us. The time for HW holding
+ * to send the beacon packet. */
+/* [23:20]: Reserved */
+/* Description: */
+/* | */
+/* |<--Setup--|--Hold------------>| */
+/* --------------|---------------------- */
+/* | */
+/* TBTT */
+/* Note: We cannot update beacon content to HW or send any AC packets during
+ * the time between Setup and Hold. */
+#define REG_TBTT_PROHIBIT 0x0540
+#define REG_RD_NAV_NXT 0x0544
+#define REG_NAV_PROT_LEN 0x0546
+#define REG_BCN_CTRL 0x0550
+#define REG_BCN_CTRL_1 0x0551
+#define REG_MBID_NUM 0x0552
+#define REG_DUAL_TSF_RST 0x0553
+#define REG_BCN_INTERVAL 0x0554
+#define REG_DRVERLYINT 0x0558
+#define REG_BCNDMATIM 0x0559
+#define REG_ATIMWND 0x055A
+#define REG_BCN_MAX_ERR 0x055D
+#define REG_RXTSF_OFFSET_CCK 0x055E
+#define REG_RXTSF_OFFSET_OFDM 0x055F
+#define REG_TSFTR 0x0560
+#define REG_TSFTR1 0x0568
+#define REG_ATIMWND_1 0x0570
+#define REG_PSTIMER 0x0580
+#define REG_TIMER0 0x0584
+#define REG_TIMER1 0x0588
+#define REG_ACMHWCTRL 0x05C0
+
+/* define REG_FW_TSF_SYNC_CNT 0x04A0 */
+#define REG_FW_RESET_TSF_CNT_1 0x05FC
+#define REG_FW_RESET_TSF_CNT_0 0x05FD
+#define REG_FW_BCN_DIS_CNT 0x05FE
+
+/* 0x0600h ~ 0x07FFh WMAC Configuration */
+#define REG_APSD_CTRL 0x0600
+#define REG_BWOPMODE 0x0603
+#define REG_TCR 0x0604
+#define REG_RCR 0x0608
+#define REG_RX_PKT_LIMIT 0x060C
+#define REG_RX_DLK_TIME 0x060D
+#define REG_RX_DRVINFO_SZ 0x060F
+
+#define REG_MACID 0x0610
+#define REG_BSSID 0x0618
+#define REG_MAR 0x0620
+#define REG_MBIDCAMCFG 0x0628
+
+#define REG_USTIME_EDCA 0x0638
+#define REG_MAC_SPEC_SIFS 0x063A
+
+/* 20100719 Joseph: Hardware register definition change. (HW datasheet v54) */
+/* [15:8]SIFS_R2T_OFDM, [7:0]SIFS_R2T_CCK */
+#define REG_R2T_SIFS 0x063C
+/* [15:8]SIFS_T2T_OFDM, [7:0]SIFS_T2T_CCK */
+#define REG_T2T_SIFS 0x063E
+#define REG_ACKTO 0x0640
+#define REG_CTS2TO 0x0641
+#define REG_EIFS 0x0642
+
+/* RXERR_RPT */
+#define RXERR_TYPE_OFDM_PPDU 0
+#define RXERR_TYPE_OFDM_false_ALARM 1
+#define RXERR_TYPE_OFDM_MPDU_OK 2
+#define RXERR_TYPE_OFDM_MPDU_FAIL 3
+#define RXERR_TYPE_CCK_PPDU 4
+#define RXERR_TYPE_CCK_false_ALARM 5
+#define RXERR_TYPE_CCK_MPDU_OK 6
+#define RXERR_TYPE_CCK_MPDU_FAIL 7
+#define RXERR_TYPE_HT_PPDU 8
+#define RXERR_TYPE_HT_false_ALARM 9
+#define RXERR_TYPE_HT_MPDU_TOTAL 10
+#define RXERR_TYPE_HT_MPDU_OK 11
+#define RXERR_TYPE_HT_MPDU_FAIL 12
+#define RXERR_TYPE_RX_FULL_DROP 15
+
+#define RXERR_COUNTER_MASK 0xFFFFF
+#define RXERR_RPT_RST BIT(27)
+#define _RXERR_RPT_SEL(type) ((type) << 28)
+
+/* Note: */
+/* The NAV upper value is very important to WiFi 11n 5.2.3 NAV test.
+ * The default value is always too small, but the WiFi TestPlan test
+ * by 25,000 microseconds of NAV through sending CTS in the air.
+ * We must update this value greater than 25,000 microseconds to pass
+ * the item. The offset of NAV_UPPER in 8192C Spec is incorrect, and
+ * the offset should be 0x0652. */
+#define REG_NAV_UPPER 0x0652 /* unit of 128 */
+
+/* WMA, BA, CCX */
+/* define REG_NAV_CTRL 0x0650 */
+#define REG_BACAMCMD 0x0654
+#define REG_BACAMCONTENT 0x0658
+#define REG_LBDLY 0x0660
+#define REG_FWDLY 0x0661
+#define REG_RXERR_RPT 0x0664
+#define REG_WMAC_TRXPTCL_CTL 0x0668
+
+/* Security */
+#define REG_CAMCMD 0x0670
+#define REG_CAMWRITE 0x0674
+#define REG_CAMREAD 0x0678
+#define REG_CAMDBG 0x067C
+#define REG_SECCFG 0x0680
+
+/* Power */
+#define REG_WOW_CTRL 0x0690
+#define REG_PS_RX_INFO 0x0692
+#define REG_UAPSD_TID 0x0693
+#define REG_WKFMCAM_CMD 0x0698
+#define REG_WKFMCAM_NUM_88E 0x698
+#define REG_RXFLTMAP0 0x06A0
+#define REG_RXFLTMAP1 0x06A2
+#define REG_RXFLTMAP2 0x06A4
+#define REG_BCN_PSR_RPT 0x06A8
+#define REG_BT_COEX_TABLE 0x06C0
+
+/* Hardware Port 2 */
+#define REG_MACID1 0x0700
+#define REG_BSSID1 0x0708
+
+/* 0xFE00h ~ 0xFE55h USB Configuration */
+#define REG_USB_INFO 0xFE17
+#define REG_USB_SPECIAL_OPTION 0xFE55
+#define REG_USB_DMA_AGG_TO 0xFE5B
+#define REG_USB_AGG_TO 0xFE5C
+#define REG_USB_AGG_TH 0xFE5D
+
+/* For normal chip */
+#define REG_NORMAL_SIE_VID 0xFE60 /* 0xFE60~0xFE61 */
+#define REG_NORMAL_SIE_PID 0xFE62 /* 0xFE62~0xFE63 */
+#define REG_NORMAL_SIE_OPTIONAL 0xFE64
+#define REG_NORMAL_SIE_EP 0xFE65 /* 0xFE65~0xFE67 */
+#define REG_NORMAL_SIE_PHY 0xFE68 /* 0xFE68~0xFE6B */
+#define REG_NORMAL_SIE_OPTIONAL2 0xFE6C
+#define REG_NORMAL_SIE_GPS_EP 0xFE6D /* 0xFE6D, for RTL8723 only. */
+#define REG_NORMAL_SIE_MAC_ADDR 0xFE70 /* 0xFE70~0xFE75 */
+#define REG_NORMAL_SIE_STRING 0xFE80 /* 0xFE80~0xFEDF */
+
+/* TODO: use these definition when using REG_xxx naming rule. */
+/* NOTE: DO NOT Remove these definition. Use later. */
+
+#define EFUSE_CTRL REG_EFUSE_CTRL /* E-Fuse Control. */
+#define EFUSE_TEST REG_EFUSE_TEST /* E-Fuse Test. */
+#define MSR (REG_CR + 2) /* Media Status reg */
+#define ISR REG_HISR_88E
+/* Timing Sync Function Timer Register. */
+#define TSFR REG_TSFTR
+
+#define PBP REG_PBP
+
+/* Redifine MACID register, to compatible prior ICs. */
+/* MAC ID Register, Offset 0x0050-0x0053 */
+#define IDR0 REG_MACID
+/* MAC ID Register, Offset 0x0054-0x0055 */
+#define IDR4 (REG_MACID + 4)
+
+/* 9. Security Control Registers (Offset: ) */
+/* IN 8190 Data Sheet is called CAMcmd */
+#define RWCAM REG_CAMCMD
+/* Software write CAM input content */
+#define WCAMI REG_CAMWRITE
+/* Software read/write CAM config */
+#define RCAMO REG_CAMREAD
+#define CAMDBG REG_CAMDBG
+/* Security Configuration Register */
+#define SECR REG_SECCFG
+
+/* Unused register */
+#define UnusedRegister 0x1BF
+#define DCAM UnusedRegister
+#define PSR UnusedRegister
+#define BBAddr UnusedRegister
+#define PhyDataR UnusedRegister
+
+/* Min Spacing related settings. */
+#define MAX_MSS_DENSITY_2T 0x13
+#define MAX_MSS_DENSITY_1T 0x0A
+
+/* EEPROM enable when set 1 */
+#define CmdEEPROM_En BIT5
+/* System EEPROM select, 0: boot from E-FUSE, 1: The EEPROM used is 9346 */
+#define CmdEERPOMSEL BIT4
+#define Cmd9346CR_9356SEL BIT4
+
+/* 8192C GPIO MUX Configuration Register (offset 0x40, 4 byte) */
+#define GPIOSEL_GPIO 0
+#define GPIOSEL_ENBT BIT5
+
+/* 8192C GPIO PIN Control Register (offset 0x44, 4 byte) */
+/* GPIO pins input value */
+#define GPIO_IN REG_GPIO_PIN_CTRL
+/* GPIO pins output value */
+#define GPIO_OUT (REG_GPIO_PIN_CTRL+1)
+/* GPIO pins output enable when a bit is set to "1"; otherwise,
+ * input is configured. */
+#define GPIO_IO_SEL (REG_GPIO_PIN_CTRL+2)
+#define GPIO_MOD (REG_GPIO_PIN_CTRL+3)
+
+/* 8723/8188E Host System Interrupt Mask Register (offset 0x58, 32 byte) */
+#define HSIMR_GPIO12_0_INT_EN BIT0
+#define HSIMR_SPS_OCP_INT_EN BIT5
+#define HSIMR_RON_INT_EN BIT6
+#define HSIMR_PDN_INT_EN BIT7
+#define HSIMR_GPIO9_INT_EN BIT25
+
+/* 8723/8188E Host System Interrupt Status Register (offset 0x5C, 32 byte) */
+#define HSISR_GPIO12_0_INT BIT0
+#define HSISR_SPS_OCP_INT BIT5
+#define HSISR_RON_INT_EN BIT6
+#define HSISR_PDNINT BIT7
+#define HSISR_GPIO9_INT BIT25
+
+/* 8192C (MSR) Media Status Register (Offset 0x4C, 8 bits) */
+/*
+Network Type
+00: No link
+01: Link in ad hoc network
+10: Link in infrastructure network
+11: AP mode
+Default: 00b.
+*/
+#define MSR_NOLINK 0x00
+#define MSR_ADHOC 0x01
+#define MSR_INFRA 0x02
+#define MSR_AP 0x03
+
+/* 88EU (MSR) Media Status Register (Offset 0x4C, 8 bits) */
+#define USB_INTR_CONTENT_C2H_OFFSET 0
+#define USB_INTR_CONTENT_CPWM1_OFFSET 16
+#define USB_INTR_CONTENT_CPWM2_OFFSET 20
+#define USB_INTR_CONTENT_HISR_OFFSET 48
+#define USB_INTR_CONTENT_HISRE_OFFSET 52
+
+/* 88E Driver Initialization Offload REG_FDHM0(Offset 0x88, 8 bits) */
+/* IOL config for REG_FDHM0(Reg0x88) */
+#define CMD_INIT_LLT BIT0
+#define CMD_READ_EFUSE_MAP BIT1
+#define CMD_EFUSE_PATCH BIT2
+#define CMD_IOCONFIG BIT3
+#define CMD_INIT_LLT_ERR BIT4
+#define CMD_READ_EFUSE_MAP_ERR BIT5
+#define CMD_EFUSE_PATCH_ERR BIT6
+#define CMD_IOCONFIG_ERR BIT7
+
+/* 6. Adaptive Control Registers (Offset: 0x0160 - 0x01CF) */
+/* 8192C Response Rate Set Register (offset 0x181, 24bits) */
+#define RRSR_1M BIT0
+#define RRSR_2M BIT1
+#define RRSR_5_5M BIT2
+#define RRSR_11M BIT3
+#define RRSR_6M BIT4
+#define RRSR_9M BIT5
+#define RRSR_12M BIT6
+#define RRSR_18M BIT7
+#define RRSR_24M BIT8
+#define RRSR_36M BIT9
+#define RRSR_48M BIT10
+#define RRSR_54M BIT11
+#define RRSR_MCS0 BIT12
+#define RRSR_MCS1 BIT13
+#define RRSR_MCS2 BIT14
+#define RRSR_MCS3 BIT15
+#define RRSR_MCS4 BIT16
+#define RRSR_MCS5 BIT17
+#define RRSR_MCS6 BIT18
+#define RRSR_MCS7 BIT19
+
+/* 8192C Response Rate Set Register (offset 0x1BF, 8bits) */
+/* WOL bit information */
+#define HAL92C_WOL_PTK_UPDATE_EVENT BIT0
+#define HAL92C_WOL_GTK_UPDATE_EVENT BIT1
+
+/* 8192C BW_OPMODE bits (Offset 0x203, 8bit) */
+#define BW_OPMODE_20MHZ BIT2
+#define BW_OPMODE_5G BIT1
+
+/* 8192C CAM Config Setting (offset 0x250, 1 byte) */
+#define CAM_VALID BIT15
+#define CAM_NOTVALID 0x0000
+#define CAM_USEDK BIT5
+
+#define CAM_CONTENT_COUNT 8
+
+#define CAM_NONE 0x0
+#define CAM_WEP40 0x01
+#define CAM_TKIP 0x02
+#define CAM_AES 0x04
+#define CAM_WEP104 0x05
+#define CAM_SMS4 0x6
+
+#define TOTAL_CAM_ENTRY 32
+#define HALF_CAM_ENTRY 16
+
+#define CAM_CONFIG_USEDK true
+#define CAM_CONFIG_NO_USEDK false
+
+#define CAM_WRITE BIT16
+#define CAM_READ 0x00000000
+#define CAM_POLLINIG BIT31
+
+#define SCR_UseDK 0x01
+#define SCR_TxSecEnable 0x02
+#define SCR_RxSecEnable 0x04
+
+/* 10. Power Save Control Registers (Offset: 0x0260 - 0x02DF) */
+#define WOW_PMEN BIT0 /* Power management Enable. */
+#define WOW_WOMEN BIT1 /* WoW function on or off. */
+#define WOW_MAGIC BIT2 /* Magic packet */
+#define WOW_UWF BIT3 /* Unicast Wakeup frame. */
+
+/* 12. Host Interrupt Status Registers (Offset: 0x0300 - 0x030F) */
+/* 8188 IMR/ISR bits */
+#define IMR_DISABLED_88E 0x0
+/* IMR DW0(0x0060-0063) Bit 0-31 */
+#define IMR_TXCCK_88E BIT30 /* TXRPT interrupt when CCX bit of the packet is set */
+#define IMR_PSTIMEOUT_88E BIT29 /* Power Save Time Out Interrupt */
+#define IMR_GTINT4_88E BIT28 /* When GTIMER4 expires, this bit is set to 1 */
+#define IMR_GTINT3_88E BIT27 /* When GTIMER3 expires, this bit is set to 1 */
+#define IMR_TBDER_88E BIT26 /* Transmit Beacon0 Error */
+#define IMR_TBDOK_88E BIT25 /* Transmit Beacon0 OK */
+#define IMR_TSF_BIT32_TOGGLE_88E BIT24 /* TSF Timer BIT32 toggle indication interrupt */
+#define IMR_BCNDMAINT0_88E BIT20 /* Beacon DMA Interrupt 0 */
+#define IMR_BCNDERR0_88E BIT16 /* Beacon Queue DMA Error 0 */
+#define IMR_HSISR_IND_ON_INT_88E BIT15 /* HSISR Indicator (HSIMR & HSISR is true, this bit is set to 1) */
+#define IMR_BCNDMAINT_E_88E BIT14 /* Beacon DMA Interrupt Extension for Win7 */
+#define IMR_ATIMEND_88E BIT12 /* CTWidnow End or ATIM Window End */
+#define IMR_HISR1_IND_INT_88E BIT11 /* HISR1 Indicator (HISR1 & HIMR1 is true, this bit is set to 1) */
+#define IMR_C2HCMD_88E BIT10 /* CPU to Host Command INT Status, Write 1 clear */
+#define IMR_CPWM2_88E BIT9 /* CPU power Mode exchange INT Status, Write 1 clear */
+#define IMR_CPWM_88E BIT8 /* CPU power Mode exchange INT Status, Write 1 clear */
+#define IMR_HIGHDOK_88E BIT7 /* High Queue DMA OK */
+#define IMR_MGNTDOK_88E BIT6 /* Management Queue DMA OK */
+#define IMR_BKDOK_88E BIT5 /* AC_BK DMA OK */
+#define IMR_BEDOK_88E BIT4 /* AC_BE DMA OK */
+#define IMR_VIDOK_88E BIT3 /* AC_VI DMA OK */
+#define IMR_VODOK_88E BIT2 /* AC_VO DMA OK */
+#define IMR_RDU_88E BIT1 /* Rx Descriptor Unavailable */
+#define IMR_ROK_88E BIT0 /* Receive DMA OK */
+
+/* IMR DW1(0x00B4-00B7) Bit 0-31 */
+#define IMR_BCNDMAINT7_88E BIT27 /* Beacon DMA Interrupt 7 */
+#define IMR_BCNDMAINT6_88E BIT26 /* Beacon DMA Interrupt 6 */
+#define IMR_BCNDMAINT5_88E BIT25 /* Beacon DMA Interrupt 5 */
+#define IMR_BCNDMAINT4_88E BIT24 /* Beacon DMA Interrupt 4 */
+#define IMR_BCNDMAINT3_88E BIT23 /* Beacon DMA Interrupt 3 */
+#define IMR_BCNDMAINT2_88E BIT22 /* Beacon DMA Interrupt 2 */
+#define IMR_BCNDMAINT1_88E BIT21 /* Beacon DMA Interrupt 1 */
+#define IMR_BCNDERR7_88E BIT20 /* Beacon DMA Error Int 7 */
+#define IMR_BCNDERR6_88E BIT19 /* Beacon DMA Error Int 6 */
+#define IMR_BCNDERR5_88E BIT18 /* Beacon DMA Error Int 5 */
+#define IMR_BCNDERR4_88E BIT17 /* Beacon DMA Error Int 4 */
+#define IMR_BCNDERR3_88E BIT16 /* Beacon DMA Error Int 3 */
+#define IMR_BCNDERR2_88E BIT15 /* Beacon DMA Error Int 2 */
+#define IMR_BCNDERR1_88E BIT14 /* Beacon DMA Error Int 1 */
+#define IMR_ATIMEND_E_88E BIT13 /* ATIM Window End Ext for Win7 */
+#define IMR_TXERR_88E BIT11 /* Tx Err Flag Int Status, write 1 clear. */
+#define IMR_RXERR_88E BIT10 /* Rx Err Flag INT Status, Write 1 clear */
+#define IMR_TXFOVW_88E BIT9 /* Transmit FIFO Overflow */
+#define IMR_RXFOVW_88E BIT8 /* Receive FIFO Overflow */
+
+#define HAL_NIC_UNPLUG_ISR 0xFFFFFFFF /* The value when the NIC is unplugged for PCI. */
+
+/* 8192C EFUSE */
+#define HWSET_MAX_SIZE 256
+#define HWSET_MAX_SIZE_88E 512
+
+/*===================================================================
+=====================================================================
+Here the register defines are for 92C. When the define is as same with 92C,
+we will use the 92C's define for the consistency
+So the following defines for 92C is not entire!!!!!!
+=====================================================================
+=====================================================================*/
+/*
+Based on Datasheet V33---090401
+Register Summary
+Current IOREG MAP
+0x0000h ~ 0x00FFh System Configuration (256 Bytes)
+0x0100h ~ 0x01FFh MACTOP General Configuration (256 Bytes)
+0x0200h ~ 0x027Fh TXDMA Configuration (128 Bytes)
+0x0280h ~ 0x02FFh RXDMA Configuration (128 Bytes)
+0x0300h ~ 0x03FFh PCIE EMAC Reserved Region (256 Bytes)
+0x0400h ~ 0x04FFh Protocol Configuration (256 Bytes)
+0x0500h ~ 0x05FFh EDCA Configuration (256 Bytes)
+0x0600h ~ 0x07FFh WMAC Configuration (512 Bytes)
+0x2000h ~ 0x3FFFh 8051 FW Download Region (8196 Bytes)
+*/
+/* 8192C (TXPAUSE) transmission pause (Offset 0x522, 8 bits) */
+/* Note: */
+/* The bits of stopping AC(VO/VI/BE/BK) queue in datasheet
+ * RTL8192S/RTL8192C are wrong, */
+/* the correct arragement is VO - Bit0, VI - Bit1, BE - Bit2,
+ * and BK - Bit3. */
+/* 8723 and 88E may be not correct either in the earlier version. */
+#define StopBecon BIT6
+#define StopHigh BIT5
+#define StopMgt BIT4
+#define StopBK BIT3
+#define StopBE BIT2
+#define StopVI BIT1
+#define StopVO BIT0
+
+/* 8192C (RCR) Receive Configuration Register(Offset 0x608, 32 bits) */
+#define RCR_APPFCS BIT31 /* WMAC append FCS after payload */
+#define RCR_APP_MIC BIT30
+#define RCR_APP_PHYSTS BIT28
+#define RCR_APP_ICV BIT29
+#define RCR_APP_PHYST_RXFF BIT28
+#define RCR_APP_BA_SSN BIT27 /* Accept BA SSN */
+#define RCR_ENMBID BIT24 /* Enable Multiple BssId. */
+#define RCR_LSIGEN BIT23
+#define RCR_MFBEN BIT22
+#define RCR_HTC_LOC_CTRL BIT14 /* MFC<--HTC=1 MFC-->HTC=0 */
+#define RCR_AMF BIT13 /* Accept management type frame */
+#define RCR_ACF BIT12 /* Accept control type frame */
+#define RCR_ADF BIT11 /* Accept data type frame */
+#define RCR_AICV BIT9 /* Accept ICV error packet */
+#define RCR_ACRC32 BIT8 /* Accept CRC32 error packet */
+#define RCR_CBSSID_BCN BIT7 /* Accept BSSID match packet
+ * (Rx beacon, probe rsp) */
+#define RCR_CBSSID_DATA BIT6 /* Accept BSSID match (Data)*/
+#define RCR_CBSSID RCR_CBSSID_DATA /* Accept BSSID match */
+#define RCR_APWRMGT BIT5 /* Accept power management pkt*/
+#define RCR_ADD3 BIT4 /* Accept address 3 match pkt */
+#define RCR_AB BIT3 /* Accept broadcast packet */
+#define RCR_AM BIT2 /* Accept multicast packet */
+#define RCR_APM BIT1 /* Accept physical match pkt */
+#define RCR_AAP BIT0 /* Accept all unicast packet */
+#define RCR_MXDMA_OFFSET 8
+#define RCR_FIFO_OFFSET 13
+
+/* 0xFE00h ~ 0xFE55h USB Configuration */
+#define REG_USB_INFO 0xFE17
+#define REG_USB_SPECIAL_OPTION 0xFE55
+#define REG_USB_DMA_AGG_TO 0xFE5B
+#define REG_USB_AGG_TO 0xFE5C
+#define REG_USB_AGG_TH 0xFE5D
+
+#define REG_USB_HRPWM 0xFE58
+#define REG_USB_HCPWM 0xFE57
+/* 8192C Regsiter Bit and Content definition */
+/* 0x0000h ~ 0x00FFh System Configuration */
+
+/* 2 SYS_ISO_CTRL */
+#define ISO_MD2PP BIT(0)
+#define ISO_UA2USB BIT(1)
+#define ISO_UD2CORE BIT(2)
+#define ISO_PA2PCIE BIT(3)
+#define ISO_PD2CORE BIT(4)
+#define ISO_IP2MAC BIT(5)
+#define ISO_DIOP BIT(6)
+#define ISO_DIOE BIT(7)
+#define ISO_EB2CORE BIT(8)
+#define ISO_DIOR BIT(9)
+#define PWC_EV12V BIT(15)
+
+/* 2 SYS_FUNC_EN */
+#define FEN_BBRSTB BIT(0)
+#define FEN_BB_GLB_RSTn BIT(1)
+#define FEN_USBA BIT(2)
+#define FEN_UPLL BIT(3)
+#define FEN_USBD BIT(4)
+#define FEN_DIO_PCIE BIT(5)
+#define FEN_PCIEA BIT(6)
+#define FEN_PPLL BIT(7)
+#define FEN_PCIED BIT(8)
+#define FEN_DIOE BIT(9)
+#define FEN_CPUEN BIT(10)
+#define FEN_DCORE BIT(11)
+#define FEN_ELDR BIT(12)
+#define FEN_DIO_RF BIT(13)
+#define FEN_HWPDN BIT(14)
+#define FEN_MREGEN BIT(15)
+
+/* 2 APS_FSMCO */
+#define PFM_LDALL BIT(0)
+#define PFM_ALDN BIT(1)
+#define PFM_LDKP BIT(2)
+#define PFM_WOWL BIT(3)
+#define EnPDN BIT(4)
+#define PDN_PL BIT(5)
+#define APFM_ONMAC BIT(8)
+#define APFM_OFF BIT(9)
+#define APFM_RSM BIT(10)
+#define AFSM_HSUS BIT(11)
+#define AFSM_PCIE BIT(12)
+#define APDM_MAC BIT(13)
+#define APDM_HOST BIT(14)
+#define APDM_HPDN BIT(15)
+#define RDY_MACON BIT(16)
+#define SUS_HOST BIT(17)
+#define ROP_ALD BIT(20)
+#define ROP_PWR BIT(21)
+#define ROP_SPS BIT(22)
+#define SOP_MRST BIT(25)
+#define SOP_FUSE BIT(26)
+#define SOP_ABG BIT(27)
+#define SOP_AMB BIT(28)
+#define SOP_RCK BIT(29)
+#define SOP_A8M BIT(30)
+#define XOP_BTCK BIT(31)
+
+/* 2 SYS_CLKR */
+#define ANAD16V_EN BIT(0)
+#define ANA8M BIT(1)
+#define MACSLP BIT(4)
+#define LOADER_CLK_EN BIT(5)
+
+/* 2 9346CR */
+
+#define BOOT_FROM_EEPROM BIT(4)
+#define EEPROM_EN BIT(5)
+
+/* 2 SPS0_CTRL */
+
+/* 2 SPS_OCP_CFG */
+
+/* 2 RF_CTRL */
+#define RF_EN BIT(0)
+#define RF_RSTB BIT(1)
+#define RF_SDMRSTB BIT(2)
+
+/* 2 LDOV12D_CTRL */
+#define LDV12_EN BIT(0)
+#define LDV12_SDBY BIT(1)
+#define LPLDO_HSM BIT(2)
+#define LPLDO_LSM_DIS BIT(3)
+#define _LDV12_VADJ(x) (((x) & 0xF) << 4)
+
+/* 2EFUSE_CTRL */
+#define ALD_EN BIT(18)
+#define EF_PD BIT(19)
+#define EF_FLAG BIT(31)
+
+/* 2 EFUSE_TEST (For RTL8723 partially) */
+#define EF_TRPT BIT(7)
+/* 00: Wifi Efuse, 01: BT Efuse0, 10: BT Efuse1, 11: BT Efuse2 */
+#define EF_CELL_SEL (BIT(8)|BIT(9))
+#define LDOE25_EN BIT(31)
+#define EFUSE_SEL(x) (((x) & 0x3) << 8)
+#define EFUSE_SEL_MASK 0x300
+#define EFUSE_WIFI_SEL_0 0x0
+#define EFUSE_BT_SEL_0 0x1
+#define EFUSE_BT_SEL_1 0x2
+#define EFUSE_BT_SEL_2 0x3
+
+#define EFUSE_ACCESS_ON 0x69 /* For RTL8723 only. */
+#define EFUSE_ACCESS_OFF 0x00 /* For RTL8723 only. */
+
+/* 2 8051FWDL */
+/* 2 MCUFWDL */
+#define MCUFWDL_EN BIT(0)
+#define MCUFWDL_RDY BIT(1)
+#define FWDL_ChkSum_rpt BIT(2)
+#define MACINI_RDY BIT(3)
+#define BBINI_RDY BIT(4)
+#define RFINI_RDY BIT(5)
+#define WINTINI_RDY BIT(6)
+#define RAM_DL_SEL BIT(7) /* 1:RAM, 0:ROM */
+#define ROM_DLEN BIT(19)
+#define CPRST BIT(23)
+
+/* 2 REG_SYS_CFG */
+#define XCLK_VLD BIT(0)
+#define ACLK_VLD BIT(1)
+#define UCLK_VLD BIT(2)
+#define PCLK_VLD BIT(3)
+#define PCIRSTB BIT(4)
+#define V15_VLD BIT(5)
+#define SW_OFFLOAD_EN BIT(7)
+#define SIC_IDLE BIT(8)
+#define BD_MAC2 BIT(9)
+#define BD_MAC1 BIT(10)
+#define IC_MACPHY_MODE BIT(11)
+#define CHIP_VER (BIT(12)|BIT(13)|BIT(14)|BIT(15))
+#define BT_FUNC BIT(16)
+#define VENDOR_ID BIT(19)
+#define PAD_HWPD_IDN BIT(22)
+#define TRP_VAUX_EN BIT(23) /* RTL ID */
+#define TRP_BT_EN BIT(24)
+#define BD_PKG_SEL BIT(25)
+#define BD_HCI_SEL BIT(26)
+#define TYPE_ID BIT(27)
+
+#define CHIP_VER_RTL_MASK 0xF000 /* Bit 12 ~ 15 */
+#define CHIP_VER_RTL_SHIFT 12
+
+/* 2REG_GPIO_OUTSTS (For RTL8723 only) */
+#define EFS_HCI_SEL (BIT(0)|BIT(1))
+#define PAD_HCI_SEL (BIT(2)|BIT(3))
+#define HCI_SEL (BIT(4)|BIT(5))
+#define PKG_SEL_HCI BIT(6)
+#define FEN_GPS BIT(7)
+#define FEN_BT BIT(8)
+#define FEN_WL BIT(9)
+#define FEN_PCI BIT(10)
+#define FEN_USB BIT(11)
+#define BTRF_HWPDN_N BIT(12)
+#define WLRF_HWPDN_N BIT(13)
+#define PDN_BT_N BIT(14)
+#define PDN_GPS_N BIT(15)
+#define BT_CTL_HWPDN BIT(16)
+#define GPS_CTL_HWPDN BIT(17)
+#define PPHY_SUSB BIT(20)
+#define UPHY_SUSB BIT(21)
+#define PCI_SUSEN BIT(22)
+#define USB_SUSEN BIT(23)
+#define RF_RL_ID (BIT(31)|BIT(30)|BIT(29)|BIT(28))
+
+/* 2SYS_CFG */
+#define RTL_ID BIT(23) /* TestChip ID, 1:Test(RLE); 0:MP(RL) */
+
+/* 0x0100h ~ 0x01FFh MACTOP General Configuration */
+
+/* 2 Function Enable Registers */
+/* 2 CR */
+
+#define HCI_TXDMA_EN BIT(0)
+#define HCI_RXDMA_EN BIT(1)
+#define TXDMA_EN BIT(2)
+#define RXDMA_EN BIT(3)
+#define PROTOCOL_EN BIT(4)
+#define SCHEDULE_EN BIT(5)
+#define MACTXEN BIT(6)
+#define MACRXEN BIT(7)
+#define ENSWBCN BIT(8)
+#define ENSEC BIT(9)
+#define CALTMR_EN BIT(10) /* 32k CAL TMR enable */
+
+/* Network type */
+#define _NETTYPE(x) (((x) & 0x3) << 16)
+#define MASK_NETTYPE 0x30000
+#define NT_NO_LINK 0x0
+#define NT_LINK_AD_HOC 0x1
+#define NT_LINK_AP 0x2
+#define NT_AS_AP 0x3
+
+/* 2 PBP - Page Size Register */
+#define GET_RX_PAGE_SIZE(value) ((value) & 0xF)
+#define GET_TX_PAGE_SIZE(value) (((value) & 0xF0) >> 4)
+#define _PSRX_MASK 0xF
+#define _PSTX_MASK 0xF0
+#define _PSRX(x) (x)
+#define _PSTX(x) ((x) << 4)
+
+#define PBP_64 0x0
+#define PBP_128 0x1
+#define PBP_256 0x2
+#define PBP_512 0x3
+#define PBP_1024 0x4
+
+/* 2 TX/RXDMA */
+#define RXDMA_ARBBW_EN BIT(0)
+#define RXSHFT_EN BIT(1)
+#define RXDMA_AGG_EN BIT(2)
+#define QS_VO_QUEUE BIT(8)
+#define QS_VI_QUEUE BIT(9)
+#define QS_BE_QUEUE BIT(10)
+#define QS_BK_QUEUE BIT(11)
+#define QS_MANAGER_QUEUE BIT(12)
+#define QS_HIGH_QUEUE BIT(13)
+
+#define HQSEL_VOQ BIT(0)
+#define HQSEL_VIQ BIT(1)
+#define HQSEL_BEQ BIT(2)
+#define HQSEL_BKQ BIT(3)
+#define HQSEL_MGTQ BIT(4)
+#define HQSEL_HIQ BIT(5)
+
+/* For normal driver, 0x10C */
+#define _TXDMA_HIQ_MAP(x) (((x)&0x3) << 14)
+#define _TXDMA_MGQ_MAP(x) (((x)&0x3) << 12)
+#define _TXDMA_BKQ_MAP(x) (((x)&0x3) << 10)
+#define _TXDMA_BEQ_MAP(x) (((x)&0x3) << 8 )
+#define _TXDMA_VIQ_MAP(x) (((x)&0x3) << 6 )
+#define _TXDMA_VOQ_MAP(x) (((x)&0x3) << 4 )
+
+#define QUEUE_LOW 1
+#define QUEUE_NORMAL 2
+#define QUEUE_HIGH 3
+
+/* 2 TRXFF_BNDY */
+
+/* 2 LLT_INIT */
+#define _LLT_NO_ACTIVE 0x0
+#define _LLT_WRITE_ACCESS 0x1
+#define _LLT_READ_ACCESS 0x2
+
+#define _LLT_INIT_DATA(x) ((x) & 0xFF)
+#define _LLT_INIT_ADDR(x) (((x) & 0xFF) << 8)
+#define _LLT_OP(x) (((x) & 0x3) << 30)
+#define _LLT_OP_VALUE(x) (((x) >> 30) & 0x3)
+
+/* 0x0200h ~ 0x027Fh TXDMA Configuration */
+/* 2RQPN */
+#define _HPQ(x) ((x) & 0xFF)
+#define _LPQ(x) (((x) & 0xFF) << 8)
+#define _PUBQ(x) (((x) & 0xFF) << 16)
+/* NOTE: in RQPN_NPQ register */
+#define _NPQ(x) ((x) & 0xFF)
+
+#define HPQ_PUBLIC_DIS BIT(24)
+#define LPQ_PUBLIC_DIS BIT(25)
+#define LD_RQPN BIT(31)
+
+/* 2TDECTRL */
+#define BCN_VALID BIT(16)
+#define BCN_HEAD(x) (((x) & 0xFF) << 8)
+#define BCN_HEAD_MASK 0xFF00
+
+/* 2 TDECTL */
+#define BLK_DESC_NUM_SHIFT 4
+#define BLK_DESC_NUM_MASK 0xF
+
+/* 2 TXDMA_OFFSET_CHK */
+#define DROP_DATA_EN BIT(9)
+
+/* 0x0280h ~ 0x028Bh RX DMA Configuration */
+
+/* REG_RXDMA_CONTROL, 0x0286h */
+
+/* 2 REG_RXPKT_NUM, 0x0284 */
+#define RXPKT_RELEASE_POLL BIT(16)
+#define RXDMA_IDLE BIT(17)
+#define RW_RELEASE_EN BIT(18)
+
+/* 0x0400h ~ 0x047Fh Protocol Configuration */
+/* 2 FWHW_TXQ_CTRL */
+#define EN_AMPDU_RTY_NEW BIT(7)
+
+/* 2 SPEC SIFS */
+#define _SPEC_SIFS_CCK(x) ((x) & 0xFF)
+#define _SPEC_SIFS_OFDM(x) (((x) & 0xFF) << 8)
+
+/* 2 RL */
+#define RETRY_LIMIT_SHORT_SHIFT 8
+#define RETRY_LIMIT_LONG_SHIFT 0
+
+/* 0x0500h ~ 0x05FFh EDCA Configuration */
+
+/* 2 EDCA setting */
+#define AC_PARAM_TXOP_LIMIT_OFFSET 16
+#define AC_PARAM_ECW_MAX_OFFSET 12
+#define AC_PARAM_ECW_MIN_OFFSET 8
+#define AC_PARAM_AIFS_OFFSET 0
+
+#define _LRL(x) ((x) & 0x3F)
+#define _SRL(x) (((x) & 0x3F) << 8)
+
+/* 2 BCN_CTRL */
+#define EN_MBSSID BIT(1)
+#define EN_TXBCN_RPT BIT(2)
+#define EN_BCN_FUNCTION BIT(3)
+#define DIS_TSF_UPDATE BIT(3)
+
+/* The same function but different bit field. */
+#define DIS_TSF_UDT0_NORMAL_CHIP BIT(4)
+#define DIS_TSF_UDT0_TEST_CHIP BIT(5)
+#define STOP_BCNQ BIT(6)
+
+/* 2 ACMHWCTRL */
+#define AcmHw_HwEn BIT(0)
+#define AcmHw_BeqEn BIT(1)
+#define AcmHw_ViqEn BIT(2)
+#define AcmHw_VoqEn BIT(3)
+#define AcmHw_BeqStatus BIT(4)
+#define AcmHw_ViqStatus BIT(5)
+#define AcmHw_VoqStatus BIT(6)
+
+/* 0x0600h ~ 0x07FFh WMAC Configuration */
+/* 2APSD_CTRL */
+#define APSDOFF BIT(6)
+#define APSDOFF_STATUS BIT(7)
+
+#define RATE_BITMAP_ALL 0xFFFFF
+
+/* Only use CCK 1M rate for ACK */
+#define RATE_RRSR_CCK_ONLY_1M 0xFFFF1
+
+/* 2 TCR */
+#define TSFRST BIT(0)
+#define DIS_GCLK BIT(1)
+#define PAD_SEL BIT(2)
+#define PWR_ST BIT(6)
+#define PWRBIT_OW_EN BIT(7)
+#define ACRC BIT(8)
+#define CFENDFORM BIT(9)
+#define ICV BIT(10)
+
+/* 2 RCR */
+#define AAP BIT(0)
+#define APM BIT(1)
+#define AM BIT(2)
+#define AB BIT(3)
+#define ADD3 BIT(4)
+#define APWRMGT BIT(5)
+#define CBSSID BIT(6)
+#define CBSSID_DATA BIT(6)
+#define CBSSID_BCN BIT(7)
+#define ACRC32 BIT(8)
+#define AICV BIT(9)
+#define ADF BIT(11)
+#define ACF BIT(12)
+#define AMF BIT(13)
+#define HTC_LOC_CTRL BIT(14)
+#define UC_DATA_EN BIT(16)
+#define BM_DATA_EN BIT(17)
+#define MFBEN BIT(22)
+#define LSIGEN BIT(23)
+#define EnMBID BIT(24)
+#define APP_BASSN BIT(27)
+#define APP_PHYSTS BIT(28)
+#define APP_ICV BIT(29)
+#define APP_MIC BIT(30)
+#define APP_FCS BIT(31)
+
+/* 2 SECCFG */
+#define SCR_TxUseDK BIT(0) /* Force Tx Use Default Key */
+#define SCR_RxUseDK BIT(1) /* Force Rx Use Default Key */
+#define SCR_TxEncEnable BIT(2) /* Enable Tx Encryption */
+#define SCR_RxDecEnable BIT(3) /* Enable Rx Decryption */
+#define SCR_SKByA2 BIT(4) /* Search kEY BY A2 */
+#define SCR_NoSKMC BIT(5) /* No Key Search Multicast */
+#define SCR_TXBCUSEDK BIT(6) /* Force Tx Bcast pkt Use Default Key */
+#define SCR_RXBCUSEDK BIT(7) /* Force Rx Bcast pkt Use Default Key */
+
+/* RTL8188E SDIO Configuration */
+
+/* I/O bus domain address mapping */
+#define SDIO_LOCAL_BASE 0x10250000
+#define WLAN_IOREG_BASE 0x10260000
+#define FIRMWARE_FIFO_BASE 0x10270000
+#define TX_HIQ_BASE 0x10310000
+#define TX_MIQ_BASE 0x10320000
+#define TX_LOQ_BASE 0x10330000
+#define RX_RX0FF_BASE 0x10340000
+
+/* SDIO host local register space mapping. */
+#define SDIO_LOCAL_MSK 0x0FFF
+#define WLAN_IOREG_MSK 0x7FFF
+#define WLAN_FIFO_MSK 0x1FFF /* Aggregation Length[12:0] */
+#define WLAN_RX0FF_MSK 0x0003
+
+/* Without ref to the SDIO Device ID */
+#define SDIO_WITHOUT_REF_DEVICE_ID 0
+#define SDIO_LOCAL_DEVICE_ID 0 /* 0b[16], 000b[15:13] */
+#define WLAN_TX_HIQ_DEVICE_ID 4 /* 0b[16], 100b[15:13] */
+#define WLAN_TX_MIQ_DEVICE_ID 5 /* 0b[16], 101b[15:13] */
+#define WLAN_TX_LOQ_DEVICE_ID 6 /* 0b[16], 110b[15:13] */
+#define WLAN_RX0FF_DEVICE_ID 7 /* 0b[16], 111b[15:13] */
+#define WLAN_IOREG_DEVICE_ID 8 /* 1b[16] */
+
+/* SDIO Tx Free Page Index */
+#define HI_QUEUE_IDX 0
+#define MID_QUEUE_IDX 1
+#define LOW_QUEUE_IDX 2
+#define PUBLIC_QUEUE_IDX 3
+
+#define SDIO_MAX_TX_QUEUE 3 /* HIQ, MIQ and LOQ */
+#define SDIO_MAX_RX_QUEUE 1
+
+/* SDIO Tx Control */
+#define SDIO_REG_TX_CTRL 0x0000
+/* SDIO Host Interrupt Mask */
+#define SDIO_REG_HIMR 0x0014
+/* SDIO Host Interrupt Service Routine */
+#define SDIO_REG_HISR 0x0018
+/* HCI Current Power Mode */
+#define SDIO_REG_HCPWM 0x0019
+/* RXDMA Request Length */
+#define SDIO_REG_RX0_REQ_LEN 0x001C
+/* Free Tx Buffer Page */
+#define SDIO_REG_FREE_TXPG 0x0020
+/* HCI Current Power Mode 1 */
+#define SDIO_REG_HCPWM1 0x0024
+/* HCI Current Power Mode 2 */
+#define SDIO_REG_HCPWM2 0x0026
+/* HTSF Informaion */
+#define SDIO_REG_HTSFR_INFO 0x0030
+/* HCI Request Power Mode 1 */
+#define SDIO_REG_HRPWM1 0x0080
+/* HCI Request Power Mode 2 */
+#define SDIO_REG_HRPWM2 0x0082
+/* HCI Power Save Clock */
+#define SDIO_REG_HPS_CLKR 0x0084
+/* SDIO HCI Suspend Control */
+#define SDIO_REG_HSUS_CTRL 0x0086
+/* SDIO Host Extension Interrupt Mask Always */
+#define SDIO_REG_HIMR_ON 0x0090
+/* SDIO Host Extension Interrupt Status Always */
+#define SDIO_REG_HISR_ON 0x0091
+
+#define SDIO_HIMR_DISABLED 0
+
+/* RTL8188E SDIO Host Interrupt Mask Register */
+#define SDIO_HIMR_RX_REQUEST_MSK BIT0
+#define SDIO_HIMR_AVAL_MSK BIT1
+#define SDIO_HIMR_TXERR_MSK BIT2
+#define SDIO_HIMR_RXERR_MSK BIT3
+#define SDIO_HIMR_TXFOVW_MSK BIT4
+#define SDIO_HIMR_RXFOVW_MSK BIT5
+#define SDIO_HIMR_TXBCNOK_MSK BIT6
+#define SDIO_HIMR_TXBCNERR_MSK BIT7
+#define SDIO_HIMR_BCNERLY_INT_MSK BIT16
+#define SDIO_HIMR_C2HCMD_MSK BIT17
+#define SDIO_HIMR_CPWM1_MSK BIT18
+#define SDIO_HIMR_CPWM2_MSK BIT19
+#define SDIO_HIMR_HSISR_IND_MSK BIT20
+#define SDIO_HIMR_GTINT3_IND_MSK BIT21
+#define SDIO_HIMR_GTINT4_IND_MSK BIT22
+#define SDIO_HIMR_PSTIMEOUT_MSK BIT23
+#define SDIO_HIMR_OCPINT_MSK BIT24
+#define SDIO_HIMR_ATIMEND_MSK BIT25
+#define SDIO_HIMR_ATIMEND_E_MSK BIT26
+#define SDIO_HIMR_CTWEND_MSK BIT27
+
+/* RTL8188E SDIO Specific */
+#define SDIO_HIMR_MCU_ERR_MSK BIT28
+#define SDIO_HIMR_TSF_BIT32_TOGGLE_MSK BIT29
+
+/* SDIO Host Interrupt Service Routine */
+#define SDIO_HISR_RX_REQUEST BIT0
+#define SDIO_HISR_AVAL BIT1
+#define SDIO_HISR_TXERR BIT2
+#define SDIO_HISR_RXERR BIT3
+#define SDIO_HISR_TXFOVW BIT4
+#define SDIO_HISR_RXFOVW BIT5
+#define SDIO_HISR_TXBCNOK BIT6
+#define SDIO_HISR_TXBCNERR BIT7
+#define SDIO_HISR_BCNERLY_INT BIT16
+#define SDIO_HISR_C2HCMD BIT17
+#define SDIO_HISR_CPWM1 BIT18
+#define SDIO_HISR_CPWM2 BIT19
+#define SDIO_HISR_HSISR_IND BIT20
+#define SDIO_HISR_GTINT3_IND BIT21
+#define SDIO_HISR_GTINT4_IND BIT22
+#define SDIO_HISR_PSTIME BIT23
+#define SDIO_HISR_OCPINT BIT24
+#define SDIO_HISR_ATIMEND BIT25
+#define SDIO_HISR_ATIMEND_E BIT26
+#define SDIO_HISR_CTWEND BIT27
+
+/* RTL8188E SDIO Specific */
+#define SDIO_HISR_MCU_ERR BIT28
+#define SDIO_HISR_TSF_BIT32_TOGGLE BIT29
+
+#define MASK_SDIO_HISR_CLEAR \
+ (SDIO_HISR_TXERR | SDIO_HISR_RXERR | SDIO_HISR_TXFOVW |\
+ SDIO_HISR_RXFOVW | SDIO_HISR_TXBCNOK | SDIO_HISR_TXBCNERR |\
+ SDIO_HISR_C2HCMD | SDIO_HISR_CPWM1 | SDIO_HISR_CPWM2 |\
+ SDIO_HISR_HSISR_IND | SDIO_HISR_GTINT3_IND | SDIO_HISR_GTINT4_IND |\
+ SDIO_HISR_PSTIMEOUT | SDIO_HISR_OCPINT)
+
+/* SDIO HCI Suspend Control Register */
+#define HCI_RESUME_PWR_RDY BIT1
+#define HCI_SUS_CTRL BIT0
+
+/* SDIO Tx FIFO related */
+/* The number of Tx FIFO free page */
+#define SDIO_TX_FREE_PG_QUEUE 4
+#define SDIO_TX_FIFO_PAGE_SZ 128
+
+/* 0xFE00h ~ 0xFE55h USB Configuration */
+
+/* 2 USB Information (0xFE17) */
+#define USB_IS_HIGH_SPEED 0
+#define USB_IS_FULL_SPEED 1
+#define USB_SPEED_MASK BIT(5)
+
+#define USB_NORMAL_SIE_EP_MASK 0xF
+#define USB_NORMAL_SIE_EP_SHIFT 4
+
+/* 2 Special Option */
+#define USB_AGG_EN BIT(3)
+
+/* 0; Use interrupt endpoint to upload interrupt pkt */
+/* 1; Use bulk endpoint to upload interrupt pkt, */
+#define INT_BULK_SEL BIT(4)
+
+/* 2REG_C2HEVT_CLEAR */
+/* Set by driver and notify FW that the driver has read
+ * the C2H command message */
+#define C2H_EVT_HOST_CLOSE 0x00
+/* Set by FW indicating that FW had set the C2H command
+ * message and it's not yet read by driver. */
+#define C2H_EVT_FW_CLOSE 0xFF
+
+/* 2REG_MULTI_FUNC_CTRL(For RTL8723 Only) */
+/* Enable GPIO[9] as WiFi HW PDn source */
+#define WL_HWPDN_EN BIT0
+/* WiFi HW PDn polarity control */
+#define WL_HWPDN_SL BIT1
+/* WiFi function enable */
+#define WL_FUNC_EN BIT2
+/* Enable GPIO[9] as WiFi RF HW PDn source */
+#define WL_HWROF_EN BIT3
+/* Enable GPIO[11] as BT HW PDn source */
+#define BT_HWPDN_EN BIT16
+/* BT HW PDn polarity control */
+#define BT_HWPDN_SL BIT17
+/* BT function enable */
+#define BT_FUNC_EN BIT18
+/* Enable GPIO[11] as BT/GPS RF HW PDn source */
+#define BT_HWROF_EN BIT19
+/* Enable GPIO[10] as GPS HW PDn source */
+#define GPS_HWPDN_EN BIT20
+/* GPS HW PDn polarity control */
+#define GPS_HWPDN_SL BIT21
+/* GPS function enable */
+#define GPS_FUNC_EN BIT22
+
+/* 3 REG_LIFECTRL_CTRL */
+#define HAL92C_EN_PKT_LIFE_TIME_BK BIT3
+#define HAL92C_EN_PKT_LIFE_TIME_BE BIT2
+#define HAL92C_EN_PKT_LIFE_TIME_VI BIT1
+#define HAL92C_EN_PKT_LIFE_TIME_VO BIT0
+
+#define HAL92C_MSDU_LIFE_TIME_UNIT 128 /* in us */
+
+/* General definitions */
+#define LAST_ENTRY_OF_TX_PKT_BUFFER 176 /* 22k 22528 bytes */
+
+#define POLLING_LLT_THRESHOLD 20
+#define POLLING_READY_TIMEOUT_COUNT 1000
+/* GPIO BIT */
+#define HAL_8192C_HW_GPIO_WPS_BIT BIT2
+
+/* 8192C EEPROM/EFUSE share register definition. */
+
+/* EEPROM/Efuse PG Offset for 88EE/88EU/88ES */
+#define EEPROM_TX_PWR_INX_88E 0x10
+
+#define EEPROM_ChannelPlan_88E 0xB8
+#define EEPROM_XTAL_88E 0xB9
+#define EEPROM_THERMAL_METER_88E 0xBA
+#define EEPROM_IQK_LCK_88E 0xBB
+
+#define EEPROM_RF_BOARD_OPTION_88E 0xC1
+#define EEPROM_RF_FEATURE_OPTION_88E 0xC2
+#define EEPROM_RF_BT_SETTING_88E 0xC3
+#define EEPROM_VERSION_88E 0xC4
+#define EEPROM_CUSTOMERID_88E 0xC5
+#define EEPROM_RF_ANTENNA_OPT_88E 0xC9
+
+/* RTL88EE */
+#define EEPROM_MAC_ADDR_88EE 0xD0
+#define EEPROM_VID_88EE 0xD6
+#define EEPROM_DID_88EE 0xD8
+#define EEPROM_SVID_88EE 0xDA
+#define EEPROM_SMID_88EE 0xDC
+
+/* RTL88EU */
+#define EEPROM_MAC_ADDR_88EU 0xD7
+#define EEPROM_VID_88EU 0xD0
+#define EEPROM_PID_88EU 0xD2
+#define EEPROM_USB_OPTIONAL_FUNCTION0 0xD4
+
+/* RTL88ES */
+#define EEPROM_MAC_ADDR_88ES 0x11A
+
+/* EEPROM/Efuse Value Type */
+#define EETYPE_TX_PWR 0x0
+
+/* Default Value for EEPROM or EFUSE!!! */
+#define EEPROM_Default_TSSI 0x0
+#define EEPROM_Default_TxPowerDiff 0x0
+#define EEPROM_Default_CrystalCap 0x5
+/* Default: 2X2, RTL8192CE(QFPN68) */
+#define EEPROM_Default_BoardType 0x02
+#define EEPROM_Default_TxPower 0x1010
+#define EEPROM_Default_HT2T_TxPwr 0x10
+
+#define EEPROM_Default_LegacyHTTxPowerDiff 0x3
+#define EEPROM_Default_ThermalMeter 0x12
+
+#define EEPROM_Default_AntTxPowerDiff 0x0
+#define EEPROM_Default_TxPwDiff_CrystalCap 0x5
+#define EEPROM_Default_TxPowerLevel 0x2A
+
+#define EEPROM_Default_HT40_2SDiff 0x0
+/* HT20<->40 default Tx Power Index Difference */
+#define EEPROM_Default_HT20_Diff 2
+#define EEPROM_Default_LegacyHTTxPowerDiff 0x3
+#define EEPROM_Default_HT40_PwrMaxOffset 0
+#define EEPROM_Default_HT20_PwrMaxOffset 0
+
+#define EEPROM_Default_CrystalCap_88E 0x20
+#define EEPROM_Default_ThermalMeter_88E 0x18
+
+/* New EFUSE deafult value */
+#define EEPROM_DEFAULT_24G_INDEX 0x2D
+#define EEPROM_DEFAULT_24G_HT20_DIFF 0X02
+#define EEPROM_DEFAULT_24G_OFDM_DIFF 0X04
+
+#define EEPROM_DEFAULT_5G_INDEX 0X2A
+#define EEPROM_DEFAULT_5G_HT20_DIFF 0X00
+#define EEPROM_DEFAULT_5G_OFDM_DIFF 0X04
+
+#define EEPROM_DEFAULT_DIFF 0XFE
+#define EEPROM_DEFAULT_CHANNEL_PLAN 0x7F
+#define EEPROM_DEFAULT_BOARD_OPTION 0x00
+#define EEPROM_DEFAULT_FEATURE_OPTION 0x00
+#define EEPROM_DEFAULT_BT_OPTION 0x10
+
+/* For debug */
+#define EEPROM_Default_PID 0x1234
+#define EEPROM_Default_VID 0x5678
+#define EEPROM_Default_CustomerID 0xAB
+#define EEPROM_Default_CustomerID_8188E 0x00
+#define EEPROM_Default_SubCustomerID 0xCD
+#define EEPROM_Default_Version 0
+
+#define EEPROM_CHANNEL_PLAN_FCC 0x0
+#define EEPROM_CHANNEL_PLAN_IC 0x1
+#define EEPROM_CHANNEL_PLAN_ETSI 0x2
+#define EEPROM_CHANNEL_PLAN_SPA 0x3
+#define EEPROM_CHANNEL_PLAN_FRANCE 0x4
+#define EEPROM_CHANNEL_PLAN_MKK 0x5
+#define EEPROM_CHANNEL_PLAN_MKK1 0x6
+#define EEPROM_CHANNEL_PLAN_ISRAEL 0x7
+#define EEPROM_CHANNEL_PLAN_TELEC 0x8
+#define EEPROM_CHANNEL_PLAN_GLOBAL_DOMA 0x9
+#define EEPROM_CHANNEL_PLAN_WORLD_WIDE_13 0xA
+#define EEPROM_CHANNEL_PLAN_NCC 0xB
+#define EEPROM_USB_OPTIONAL1 0xE
+#define EEPROM_CHANNEL_PLAN_BY_HW_MASK 0x80
+
+#define EEPROM_CID_DEFAULT 0x0
+#define EEPROM_CID_TOSHIBA 0x4
+#define EEPROM_CID_CCX 0x10 /* CCX test. */
+#define EEPROM_CID_QMI 0x0D
+#define EEPROM_CID_WHQL 0xFE
+#define RTL_EEPROM_ID 0x8129
+
+#endif /* __RTL8188E_SPEC_H__ */
diff --git a/drivers/staging/r8188eu/include/rtl8188e_sreset.h b/drivers/staging/r8188eu/include/rtl8188e_sreset.h
new file mode 100644
index 000000000000..a29e69519794
--- /dev/null
+++ b/drivers/staging/r8188eu/include/rtl8188e_sreset.h
@@ -0,0 +1,31 @@
+/******************************************************************************
+ *
+ * Copyright(c) 2007 - 2011 Realtek Corporation. All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of version 2 of the GNU General Public License as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
+ * more details.
+ *
+ * You should have received a copy of the GNU General Public License along with
+ * this program; if not, write to the Free Software Foundation, Inc.,
+ * 51 Franklin Street, Fifth Floor, Boston, MA 02110, USA
+ *
+ *
+ ******************************************************************************/
+#ifndef _RTL8188E_SRESET_H_
+#define _RTL8188E_SRESET_H_
+
+#include <osdep_service.h>
+#include <drv_types.h>
+#include <rtw_sreset.h>
+
+void rtl8188e_silentreset_for_specific_platform(struct adapter *padapter);
+void rtl8188e_sreset_xmit_status_check(struct adapter *padapter);
+void rtl8188e_sreset_linked_status_check(struct adapter *padapter);
+
+#endif
diff --git a/drivers/staging/r8188eu/include/rtl8188e_xmit.h b/drivers/staging/r8188eu/include/rtl8188e_xmit.h
new file mode 100644
index 000000000000..5e586058826d
--- /dev/null
+++ b/drivers/staging/r8188eu/include/rtl8188e_xmit.h
@@ -0,0 +1,177 @@
+/******************************************************************************
+ *
+ * Copyright(c) 2007 - 2011 Realtek Corporation. All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of version 2 of the GNU General Public License as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
+ * more details.
+ *
+ * You should have received a copy of the GNU General Public License along with
+ * this program; if not, write to the Free Software Foundation, Inc.,
+ * 51 Franklin Street, Fifth Floor, Boston, MA 02110, USA
+ *
+ *
+ ******************************************************************************/
+#ifndef __RTL8188E_XMIT_H__
+#define __RTL8188E_XMIT_H__
+
+#define MAX_TX_AGG_PACKET_NUMBER 0xFF
+/* */
+/* Queue Select Value in TxDesc */
+/* */
+#define QSLT_BK 0x2/* 0x01 */
+#define QSLT_BE 0x0
+#define QSLT_VI 0x5/* 0x4 */
+#define QSLT_VO 0x7/* 0x6 */
+#define QSLT_BEACON 0x10
+#define QSLT_HIGH 0x11
+#define QSLT_MGNT 0x12
+#define QSLT_CMD 0x13
+
+/* For 88e early mode */
+#define SET_EARLYMODE_PKTNUM(__pAddr, __Value) \
+ SET_BITS_TO_LE_4BYTE(__pAddr, 0, 3, __Value)
+#define SET_EARLYMODE_LEN0(__pAddr, __Value) \
+ SET_BITS_TO_LE_4BYTE(__pAddr, 4, 12, __Value)
+#define SET_EARLYMODE_LEN1(__pAddr, __Value) \
+ SET_BITS_TO_LE_4BYTE(__pAddr, 16, 12, __Value)
+#define SET_EARLYMODE_LEN2_1(__pAddr, __Value) \
+ SET_BITS_TO_LE_4BYTE(__pAddr, 28, 4, __Value)
+#define SET_EARLYMODE_LEN2_2(__pAddr, __Value) \
+ SET_BITS_TO_LE_4BYTE(__pAddr+4, 0, 8, __Value)
+#define SET_EARLYMODE_LEN3(__pAddr, __Value) \
+ SET_BITS_TO_LE_4BYTE(__pAddr+4, 8, 12, __Value)
+#define SET_EARLYMODE_LEN4(__pAddr, __Value) \
+ SET_BITS_TO_LE_4BYTE(__pAddr+4, 20, 12, __Value)
+
+/* */
+/* defined for TX DESC Operation */
+/* */
+
+#define MAX_TID (15)
+
+/* OFFSET 0 */
+#define OFFSET_SZ 0
+#define OFFSET_SHT 16
+#define BMC BIT(24)
+#define LSG BIT(26)
+#define FSG BIT(27)
+#define OWN BIT(31)
+
+/* OFFSET 4 */
+#define PKT_OFFSET_SZ 0
+#define QSEL_SHT 8
+#define RATE_ID_SHT 16
+#define NAVUSEHDR BIT(20)
+#define SEC_TYPE_SHT 22
+#define PKT_OFFSET_SHT 26
+
+/* OFFSET 8 */
+#define AGG_EN BIT(12)
+#define AGG_BK BIT(16)
+#define AMPDU_DENSITY_SHT 20
+#define ANTSEL_A BIT(24)
+#define ANTSEL_B BIT(25)
+#define TX_ANT_CCK_SHT 26
+#define TX_ANTL_SHT 28
+#define TX_ANT_HT_SHT 30
+
+/* OFFSET 12 */
+#define SEQ_SHT 16
+#define EN_HWSEQ BIT(31)
+
+/* OFFSET 16 */
+#define QOS BIT(6)
+#define HW_SSN BIT(7)
+#define USERATE BIT(8)
+#define DISDATAFB BIT(10)
+#define CTS_2_SELF BIT(11)
+#define RTS_EN BIT(12)
+#define HW_RTS_EN BIT(13)
+#define DATA_SHORT BIT(24)
+#define PWR_STATUS_SHT 15
+#define DATA_SC_SHT 20
+#define DATA_BW BIT(25)
+
+/* OFFSET 20 */
+#define RTY_LMT_EN BIT(17)
+
+enum TXDESC_SC {
+ SC_DONT_CARE = 0x00,
+ SC_UPPER = 0x01,
+ SC_LOWER = 0x02,
+ SC_DUPLICATE = 0x03
+};
+/* OFFSET 20 */
+#define SGI BIT(6)
+#define USB_TXAGG_NUM_SHT 24
+
+#define txdesc_set_ccx_sw_88e(txdesc, value) \
+ do { \
+ ((struct txdesc_88e *)(txdesc))->sw1 = (((value)>>8) & 0x0f); \
+ ((struct txdesc_88e *)(txdesc))->sw0 = ((value) & 0xff); \
+ } while (0)
+
+struct txrpt_ccx_88e {
+ /* offset 0 */
+ u8 tag1:1;
+ u8 pkt_num:3;
+ u8 txdma_underflow:1;
+ u8 int_bt:1;
+ u8 int_tri:1;
+ u8 int_ccx:1;
+
+ /* offset 1 */
+ u8 mac_id:6;
+ u8 pkt_ok:1;
+ u8 bmc:1;
+
+ /* offset 2 */
+ u8 retry_cnt:6;
+ u8 lifetime_over:1;
+ u8 retry_over:1;
+
+ /* offset 3 */
+ u8 ccx_qtime0;
+ u8 ccx_qtime1;
+
+ /* offset 5 */
+ u8 final_data_rate;
+
+ /* offset 6 */
+ u8 sw1:4;
+ u8 qsel:4;
+
+ /* offset 7 */
+ u8 sw0;
+};
+
+#define txrpt_ccx_sw_88e(txrpt_ccx) ((txrpt_ccx)->sw0 + ((txrpt_ccx)->sw1<<8))
+#define txrpt_ccx_qtime_88e(txrpt_ccx) \
+ ((txrpt_ccx)->ccx_qtime0+((txrpt_ccx)->ccx_qtime1<<8))
+
+void rtl8188e_fill_fake_txdesc(struct adapter *padapter, u8 *pDesc,
+ u32 BufferLen, u8 IsPsPoll, u8 IsBTQosNull);
+s32 rtl8188eu_init_xmit_priv(struct adapter *padapter);
+void rtl8188eu_free_xmit_priv(struct adapter *padapter);
+s32 rtl8188eu_hal_xmit(struct adapter *padapter, struct xmit_frame *frame);
+s32 rtl8188eu_mgnt_xmit(struct adapter *padapter, struct xmit_frame *frame);
+s32 rtl8188eu_xmit_buf_handler(struct adapter *padapter);
+#define hal_xmit_handler rtl8188eu_xmit_buf_handler
+void rtl8188eu_xmit_tasklet(void *priv);
+s32 rtl8188eu_xmitframe_complete(struct adapter *padapter,
+ struct xmit_priv *pxmitpriv,
+ struct xmit_buf *pxmitbuf);
+
+void dump_txrpt_ccx_88e(void *buf);
+void handle_txrpt_ccx_88e(struct adapter *adapter, u8 *buf);
+
+void _dbg_dump_tx_info(struct adapter *padapter, int frame_tag,
+ struct tx_desc *ptxdesc);
+
+#endif /* __RTL8188E_XMIT_H__ */
diff --git a/drivers/staging/r8188eu/include/rtw_android.h b/drivers/staging/r8188eu/include/rtw_android.h
new file mode 100644
index 000000000000..e85bf1ff01f8
--- /dev/null
+++ b/drivers/staging/r8188eu/include/rtw_android.h
@@ -0,0 +1,64 @@
+/******************************************************************************
+ *
+ * Copyright(c) 2007 - 2011 Realtek Corporation. All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of version 2 of the GNU General Public License as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
+ * more details.
+ *
+ * You should have received a copy of the GNU General Public License along with
+ * this program; if not, write to the Free Software Foundation, Inc.,
+ * 51 Franklin Street, Fifth Floor, Boston, MA 02110, USA
+ *
+ *
+ ******************************************************************************/
+
+#ifndef __RTW_ANDROID_H__
+#define __RTW_ANDROID_H__
+
+#include <linux/module.h>
+#include <linux/netdevice.h>
+
+enum ANDROID_WIFI_CMD {
+ ANDROID_WIFI_CMD_START,
+ ANDROID_WIFI_CMD_STOP,
+ ANDROID_WIFI_CMD_SCAN_ACTIVE,
+ ANDROID_WIFI_CMD_SCAN_PASSIVE,
+ ANDROID_WIFI_CMD_RSSI,
+ ANDROID_WIFI_CMD_LINKSPEED,
+ ANDROID_WIFI_CMD_RXFILTER_START,
+ ANDROID_WIFI_CMD_RXFILTER_STOP,
+ ANDROID_WIFI_CMD_RXFILTER_ADD,
+ ANDROID_WIFI_CMD_RXFILTER_REMOVE,
+ ANDROID_WIFI_CMD_BTCOEXSCAN_START,
+ ANDROID_WIFI_CMD_BTCOEXSCAN_STOP,
+ ANDROID_WIFI_CMD_BTCOEXMODE,
+ ANDROID_WIFI_CMD_SETSUSPENDOPT,
+ ANDROID_WIFI_CMD_P2P_DEV_ADDR,
+ ANDROID_WIFI_CMD_SETFWPATH,
+ ANDROID_WIFI_CMD_SETBAND,
+ ANDROID_WIFI_CMD_GETBAND,
+ ANDROID_WIFI_CMD_COUNTRY,
+ ANDROID_WIFI_CMD_P2P_SET_NOA,
+ ANDROID_WIFI_CMD_P2P_GET_NOA,
+ ANDROID_WIFI_CMD_P2P_SET_PS,
+ ANDROID_WIFI_CMD_SET_AP_WPS_P2P_IE,
+ ANDROID_WIFI_CMD_MACADDR,
+ ANDROID_WIFI_CMD_BLOCK,
+ ANDROID_WIFI_CMD_WFD_ENABLE,
+ ANDROID_WIFI_CMD_WFD_DISABLE,
+ ANDROID_WIFI_CMD_WFD_SET_TCPPORT,
+ ANDROID_WIFI_CMD_WFD_SET_MAX_TPUT,
+ ANDROID_WIFI_CMD_WFD_SET_DEVTYPE,
+ ANDROID_WIFI_CMD_MAX
+};
+
+int rtw_android_cmdstr_to_num(char *cmdstr);
+int rtw_android_priv_cmd(struct net_device *net, struct ifreq *ifr, int cmd);
+
+#endif /* __RTW_ANDROID_H__ */
diff --git a/drivers/staging/r8188eu/include/rtw_ap.h b/drivers/staging/r8188eu/include/rtw_ap.h
new file mode 100644
index 000000000000..bf3c9fb60153
--- /dev/null
+++ b/drivers/staging/r8188eu/include/rtw_ap.h
@@ -0,0 +1,67 @@
+/******************************************************************************
+ *
+ * Copyright(c) 2007 - 2012 Realtek Corporation. All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of version 2 of the GNU General Public License as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
+ * more details.
+ *
+ * You should have received a copy of the GNU General Public License along with
+ * this program; if not, write to the Free Software Foundation, Inc.,
+ * 51 Franklin Street, Fifth Floor, Boston, MA 02110, USA
+ *
+ *
+ ******************************************************************************/
+#ifndef __RTW_AP_H_
+#define __RTW_AP_H_
+
+#include <osdep_service.h>
+#include <drv_types.h>
+
+#ifdef CONFIG_88EU_AP_MODE
+
+/* external function */
+void rtw_indicate_sta_assoc_event(struct adapter *padapter,
+ struct sta_info *psta);
+void rtw_indicate_sta_disassoc_event(struct adapter *padapter,
+ struct sta_info *psta);
+void init_mlme_ap_info(struct adapter *padapter);
+void free_mlme_ap_info(struct adapter *padapter);
+void rtw_add_bcn_ie(struct adapter *padapter, struct wlan_bssid_ex *pnetwork,
+ u8 index, u8 *data, u8 len);
+void rtw_remove_bcn_ie(struct adapter *padapter,
+ struct wlan_bssid_ex *pnetwork, u8 index);
+void update_beacon(struct adapter *padapter, u8 ie_id,
+ u8 *oui, u8 tx);
+void add_RATid(struct adapter *padapter, struct sta_info *psta,
+ u8 rssi_level);
+void expire_timeout_chk(struct adapter *padapter);
+void update_sta_info_apmode(struct adapter *padapter, struct sta_info *psta);
+int rtw_check_beacon_data(struct adapter *padapter, u8 *pbuf, int len);
+void rtw_ap_restore_network(struct adapter *padapter);
+void rtw_set_macaddr_acl(struct adapter *padapter, int mode);
+int rtw_acl_add_sta(struct adapter *padapter, u8 *addr);
+int rtw_acl_remove_sta(struct adapter *padapter, u8 *addr);
+
+#ifdef CONFIG_88EU_AP_MODE
+void associated_clients_update(struct adapter *padapter, u8 updated);
+void bss_cap_update_on_sta_join(struct adapter *padapter, struct sta_info *psta);
+u8 bss_cap_update_on_sta_leave(struct adapter *padapter, struct sta_info *psta);
+void sta_info_update(struct adapter *padapter, struct sta_info *psta);
+void ap_sta_info_defer_update(struct adapter *padapter, struct sta_info *psta);
+u8 ap_free_sta(struct adapter *padapter, struct sta_info *psta,
+ bool active, u16 reason);
+int rtw_sta_flush(struct adapter *padapter);
+int rtw_ap_inform_ch_switch(struct adapter *padapter, u8 new_ch, u8 ch_offset);
+void start_ap_mode(struct adapter *padapter);
+void stop_ap_mode(struct adapter *padapter);
+#endif
+#endif /* end of CONFIG_88EU_AP_MODE */
+void update_bmc_sta(struct adapter *padapter);
+
+#endif
diff --git a/drivers/staging/r8188eu/include/rtw_br_ext.h b/drivers/staging/r8188eu/include/rtw_br_ext.h
new file mode 100644
index 000000000000..f21e7a4515d0
--- /dev/null
+++ b/drivers/staging/r8188eu/include/rtw_br_ext.h
@@ -0,0 +1,66 @@
+/******************************************************************************
+ *
+ * Copyright(c) 2007 - 2011 Realtek Corporation. All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of version 2 of the GNU General Public License as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
+ * more details.
+ *
+ * You should have received a copy of the GNU General Public License along with
+ * this program; if not, write to the Free Software Foundation, Inc.,
+ * 51 Franklin Street, Fifth Floor, Boston, MA 02110, USA
+ *
+ *
+ ******************************************************************************/
+#ifndef _RTW_BR_EXT_H_
+#define _RTW_BR_EXT_H_
+
+#define MACADDRLEN 6
+#define _DEBUG_ERR DBG_88E
+#define _DEBUG_INFO DBG_88E
+#define DEBUG_WARN DBG_88E
+#define DEBUG_INFO DBG_88E
+#define DEBUG_ERR DBG_88E
+#define GET_MY_HWADDR(padapter) ((padapter)->eeprompriv.mac_addr)
+
+#define NAT25_HASH_BITS 4
+#define NAT25_HASH_SIZE (1 << NAT25_HASH_BITS)
+#define NAT25_AGEING_TIME 300
+
+#define MAX_NETWORK_ADDR_LEN 17
+
+struct nat25_network_db_entry {
+ struct nat25_network_db_entry *next_hash;
+ struct nat25_network_db_entry **pprev_hash;
+ atomic_t use_count;
+ unsigned char macAddr[6];
+ unsigned long ageing_timer;
+ unsigned char networkAddr[MAX_NETWORK_ADDR_LEN];
+};
+
+enum NAT25_METHOD {
+ NAT25_MIN,
+ NAT25_CHECK,
+ NAT25_INSERT,
+ NAT25_LOOKUP,
+ NAT25_PARSE,
+ NAT25_MAX
+};
+
+struct br_ext_info {
+ unsigned int nat25_disable;
+ unsigned int macclone_enable;
+ unsigned int dhcp_bcst_disable;
+ int addPPPoETag; /* 1: Add PPPoE relay-SID, 0: disable */
+ unsigned char nat25_dmzMac[MACADDRLEN];
+ unsigned int nat25sc_disable;
+};
+
+void nat25_db_cleanup(struct adapter *priv);
+
+#endif /* _RTW_BR_EXT_H_ */
diff --git a/drivers/staging/r8188eu/include/rtw_cmd.h b/drivers/staging/r8188eu/include/rtw_cmd.h
new file mode 100644
index 000000000000..357e732ac046
--- /dev/null
+++ b/drivers/staging/r8188eu/include/rtw_cmd.h
@@ -0,0 +1,991 @@
+/******************************************************************************
+ *
+ * Copyright(c) 2007 - 2011 Realtek Corporation. All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of version 2 of the GNU General Public License as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
+ * more details.
+ *
+ * You should have received a copy of the GNU General Public License along with
+ * this program; if not, write to the Free Software Foundation, Inc.,
+ * 51 Franklin Street, Fifth Floor, Boston, MA 02110, USA
+ *
+ *
+ ******************************************************************************/
+#ifndef __RTW_CMD_H_
+#define __RTW_CMD_H_
+
+#include <wlan_bssdef.h>
+#include <rtw_rf.h>
+#include <rtw_led.h>
+
+#define C2H_MEM_SZ (16*1024)
+
+#include <osdep_service.h>
+#include <ieee80211.h> /* <ieee80211/ieee80211.h> */
+
+#define FREE_CMDOBJ_SZ 128
+
+#define MAX_CMDSZ 1024
+#define MAX_RSPSZ 512
+#define MAX_EVTSZ 1024
+
+#define CMDBUFF_ALIGN_SZ 512
+
+struct cmd_obj {
+ struct adapter *padapter;
+ u16 cmdcode;
+ u8 res;
+ u8 *parmbuf;
+ u32 cmdsz;
+ u8 *rsp;
+ u32 rspsz;
+ struct list_head list;
+};
+
+struct cmd_priv {
+ struct semaphore cmd_queue_sema;
+ struct semaphore terminate_cmdthread_sema;
+ struct __queue cmd_queue;
+ u8 cmd_seq;
+ u8 *cmd_buf; /* shall be non-paged, and 4 bytes aligned */
+ u8 *cmd_allocated_buf;
+ u8 *rsp_buf; /* shall be non-paged, and 4 bytes aligned */
+ u8 *rsp_allocated_buf;
+ u32 cmd_issued_cnt;
+ u32 cmd_done_cnt;
+ u32 rsp_cnt;
+ u8 cmdthd_running;
+ struct adapter *padapter;
+};
+
+struct evt_priv {
+ struct work_struct c2h_wk;
+ bool c2h_wk_alive;
+ struct rtw_cbuf *c2h_queue;
+ #define C2H_QUEUE_MAX_LEN 10
+ ATOMIC_T event_seq;
+ u8 *evt_buf; /* shall be non-paged, and 4 bytes aligned */
+ u8 *evt_allocated_buf;
+ u32 evt_done_cnt;
+};
+
+#define init_h2fwcmd_w_parm_no_rsp(pcmd, pparm, code) \
+do {\
+ INIT_LIST_HEAD(&pcmd->list);\
+ pcmd->cmdcode = code;\
+ pcmd->parmbuf = (u8 *)(pparm);\
+ pcmd->cmdsz = sizeof(*pparm);\
+ pcmd->rsp = NULL;\
+ pcmd->rspsz = 0;\
+} while (0)
+
+struct c2h_evt_hdr {
+ u8 id:4;
+ u8 plen:4;
+ u8 seq;
+ u8 payload[0];
+};
+
+#define c2h_evt_exist(c2h_evt) ((c2h_evt)->id || (c2h_evt)->plen)
+
+u32 rtw_enqueue_cmd(struct cmd_priv *pcmdpriv, struct cmd_obj *obj);
+struct cmd_obj *rtw_dequeue_cmd(struct cmd_priv *pcmdpriv);
+void rtw_free_cmd_obj(struct cmd_obj *pcmd);
+
+int rtw_cmd_thread(void *context);
+
+u32 rtw_init_cmd_priv(struct cmd_priv *pcmdpriv);
+void rtw_free_cmd_priv(struct cmd_priv *pcmdpriv);
+
+u32 rtw_init_evt_priv(struct evt_priv *pevtpriv);
+void rtw_free_evt_priv(struct evt_priv *pevtpriv);
+void rtw_cmd_clr_isr(struct cmd_priv *pcmdpriv);
+void rtw_evt_notify_isr(struct evt_priv *pevtpriv);
+#ifdef CONFIG_88EU_P2P
+u8 p2p_protocol_wk_cmd(struct adapter *padapter, int intCmdType);
+#endif /* CONFIG_88EU_P2P */
+
+enum rtw_drvextra_cmd_id {
+ NONE_WK_CID,
+ DYNAMIC_CHK_WK_CID,
+ DM_CTRL_WK_CID,
+ PBC_POLLING_WK_CID,
+ POWER_SAVING_CTRL_WK_CID,/* IPS,AUTOSuspend */
+ LPS_CTRL_WK_CID,
+ ANT_SELECT_WK_CID,
+ P2P_PS_WK_CID,
+ P2P_PROTO_WK_CID,
+ CHECK_HIQ_WK_CID,/* for softap mode, check hi queue if empty */
+ INTEl_WIDI_WK_CID,
+ C2H_WK_CID,
+ RTP_TIMER_CFG_WK_CID,
+ MAX_WK_CID
+};
+
+enum LPS_CTRL_TYPE {
+ LPS_CTRL_SCAN = 0,
+ LPS_CTRL_JOINBSS = 1,
+ LPS_CTRL_CONNECT = 2,
+ LPS_CTRL_DISCONNECT = 3,
+ LPS_CTRL_SPECIAL_PACKET = 4,
+ LPS_CTRL_LEAVE = 5,
+};
+
+enum RFINTFS {
+ SWSI,
+ HWSI,
+ HWPI,
+};
+
+/*
+Caller Mode: Infra, Ad-HoC(C)
+
+Notes: To enter USB suspend mode
+
+Command Mode
+
+*/
+struct usb_suspend_parm {
+ u32 action;/* 1: sleep, 0:resume */
+};
+
+/*
+Caller Mode: Infra, Ad-HoC
+
+Notes: To join a known BSS.
+
+Command-Event Mode
+
+*/
+
+/*
+Caller Mode: Infra, Ad-Hoc
+
+Notes: To join the specified bss
+
+Command Event Mode
+
+*/
+struct joinbss_parm {
+ struct wlan_bssid_ex network;
+};
+
+/*
+Caller Mode: Infra, Ad-HoC(C)
+
+Notes: To disconnect the current associated BSS
+
+Command Mode
+
+*/
+struct disconnect_parm {
+ u32 deauth_timeout_ms;
+};
+
+/*
+Caller Mode: AP, Ad-HoC(M)
+
+Notes: To create a BSS
+
+Command Mode
+*/
+struct createbss_parm {
+ struct wlan_bssid_ex network;
+};
+
+struct setopmode_parm {
+ u8 mode;
+ u8 rsvd[3];
+};
+
+/*
+Caller Mode: AP, Ad-HoC, Infra
+
+Notes: To ask RTL8711 performing site-survey
+
+Command-Event Mode
+
+*/
+
+#define RTW_SSID_SCAN_AMOUNT 9 /* for WEXT_CSCAN_AMOUNT 9 */
+#define RTW_CHANNEL_SCAN_AMOUNT (14+37)
+struct sitesurvey_parm {
+ int scan_mode; /* active: 1, passive: 0 */
+ u8 ssid_num;
+ u8 ch_num;
+ struct ndis_802_11_ssid ssid[RTW_SSID_SCAN_AMOUNT];
+ struct rtw_ieee80211_channel ch[RTW_CHANNEL_SCAN_AMOUNT];
+};
+
+/*
+Caller Mode: Any
+
+Notes: To set the auth type of RTL8711. open/shared/802.1x
+
+Command Mode
+
+*/
+struct setauth_parm {
+ u8 mode; /* 0: legacy open, 1: legacy shared 2: 802.1x */
+ u8 _1x; /* 0: PSK, 1: TLS */
+ u8 rsvd[2];
+};
+
+/*
+Caller Mode: Infra
+
+a. algorithm: wep40, wep104, tkip & aes
+b. keytype: grp key/unicast key
+c. key contents
+
+when shared key ==> keyid is the camid
+when 802.1x ==> keyid [0:1] ==> grp key
+when 802.1x ==> keyid > 2 ==> unicast key
+
+*/
+struct setkey_parm {
+ u8 algorithm; /* could be none, wep40, TKIP, CCMP, wep104 */
+ u8 keyid;
+ u8 grpkey; /* 1: this is the grpkey for 802.1x.
+ * 0: this is the unicast key for 802.1x */
+ u8 set_tx; /* 1: main tx key for wep. 0: other key. */
+ u8 key[16]; /* this could be 40 or 104 */
+};
+
+/*
+When in AP or Ad-Hoc mode, this is used to
+allocate an sw/hw entry for a newly associated sta.
+
+Command
+
+when shared key ==> algorithm/keyid
+
+*/
+struct set_stakey_parm {
+ u8 addr[ETH_ALEN];
+ u8 algorithm;
+ u8 id;/* currently for erasing cam entry if
+ * algorithm == _NO_PRIVACY_ */
+ u8 key[16];
+};
+
+struct set_stakey_rsp {
+ u8 addr[ETH_ALEN];
+ u8 keyid;
+ u8 rsvd;
+};
+
+/*
+Caller Ad-Hoc/AP
+
+Command -Rsp(AID == CAMID) mode
+
+This is to force fw to add an sta_data entry per driver's request.
+
+FW will write an cam entry associated with it.
+
+*/
+struct set_assocsta_parm {
+ u8 addr[ETH_ALEN];
+};
+
+struct set_assocsta_rsp {
+ u8 cam_id;
+ u8 rsvd[3];
+};
+
+/*
+ Caller Ad-Hoc/AP
+
+ Command mode
+
+ This is to force fw to del an sta_data entry per driver's request
+
+ FW will invalidate the cam entry associated with it.
+
+*/
+struct del_assocsta_parm {
+ u8 addr[ETH_ALEN];
+};
+
+/*
+Caller Mode: AP/Ad-HoC(M)
+
+Notes: To notify fw that given staid has changed its power state
+
+Command Mode
+
+*/
+struct setstapwrstate_parm {
+ u8 staid;
+ u8 status;
+ u8 hwaddr[6];
+};
+
+/*
+Caller Mode: Any
+
+Notes: To setup the basic rate of RTL8711
+
+Command Mode
+
+*/
+struct setbasicrate_parm {
+ u8 basicrates[NumRates];
+};
+
+/*
+Caller Mode: Any
+
+Notes: To read the current basic rate
+
+Command-Rsp Mode
+
+*/
+struct getbasicrate_parm {
+ u32 rsvd;
+};
+
+struct getbasicrate_rsp {
+ u8 basicrates[NumRates];
+};
+
+/*
+Caller Mode: Any
+
+Notes: To setup the data rate of RTL8711
+
+Command Mode
+
+*/
+struct setdatarate_parm {
+ u8 mac_id;
+ u8 datarates[NumRates];
+};
+
+/*
+Caller Mode: Any
+
+Notes: To read the current data rate
+
+Command-Rsp Mode
+
+*/
+struct getdatarate_parm {
+ u32 rsvd;
+
+};
+struct getdatarate_rsp {
+ u8 datarates[NumRates];
+};
+
+/*
+Caller Mode: Any
+AP: AP can use the info for the contents of beacon frame
+Infra: STA can use the info when sitesurveying
+Ad-HoC(M): Like AP
+Ad-HoC(C): Like STA
+
+Notes: To set the phy capability of the NIC
+
+Command Mode
+
+*/
+
+struct setphyinfo_parm {
+ struct regulatory_class class_sets[NUM_REGULATORYS];
+ u8 status;
+};
+
+struct getphyinfo_parm {
+ u32 rsvd;
+};
+
+struct getphyinfo_rsp {
+ struct regulatory_class class_sets[NUM_REGULATORYS];
+ u8 status;
+};
+
+/*
+Caller Mode: Any
+
+Notes: To set the channel/modem/band
+This command will be used when channel/modem/band is changed.
+
+Command Mode
+
+*/
+struct setphy_parm {
+ u8 rfchannel;
+ u8 modem;
+};
+
+/*
+Caller Mode: Any
+
+Notes: To get the current setting of channel/modem/band
+
+Command-Rsp Mode
+
+*/
+struct getphy_parm {
+ u32 rsvd;
+
+};
+struct getphy_rsp {
+ u8 rfchannel;
+ u8 modem;
+};
+
+struct readBB_parm {
+ u8 offset;
+};
+struct readBB_rsp {
+ u8 value;
+};
+
+struct readTSSI_parm {
+ u8 offset;
+};
+struct readTSSI_rsp {
+ u8 value;
+};
+
+struct writeBB_parm {
+ u8 offset;
+ u8 value;
+};
+
+struct readRF_parm {
+ u8 offset;
+};
+struct readRF_rsp {
+ u32 value;
+};
+
+struct writeRF_parm {
+ u32 offset;
+ u32 value;
+};
+
+struct getrfintfs_parm {
+ u8 rfintfs;
+};
+
+struct Tx_Beacon_param
+{
+ struct wlan_bssid_ex network;
+};
+
+/*
+ Notes: This command is used for H2C/C2H loopback testing
+
+ mac[0] == 0
+ ==> CMD mode, return H2C_SUCCESS.
+ The following condition must be ture under CMD mode
+ mac[1] == mac[4], mac[2] == mac[3], mac[0]=mac[5]= 0;
+ s0 == 0x1234, s1 == 0xabcd, w0 == 0x78563412, w1 == 0x5aa5def7;
+ s2 == (b1 << 8 | b0);
+
+ mac[0] == 1
+ ==> CMD_RSP mode, return H2C_SUCCESS_RSP
+
+ The rsp layout shall be:
+ rsp: parm:
+ mac[0] = mac[5];
+ mac[1] = mac[4];
+ mac[2] = mac[3];
+ mac[3] = mac[2];
+ mac[4] = mac[1];
+ mac[5] = mac[0];
+ s0 = s1;
+ s1 = swap16(s0);
+ w0 = swap32(w1);
+ b0 = b1
+ s2 = s0 + s1
+ b1 = b0
+ w1 = w0
+
+ mac[0] == 2
+ ==> CMD_EVENT mode, return H2C_SUCCESS
+ The event layout shall be:
+ event: parm:
+ mac[0] = mac[5];
+ mac[1] = mac[4];
+ mac[2] = event's seq no, starting from 1 to parm's marc[3]
+ mac[3] = mac[2];
+ mac[4] = mac[1];
+ mac[5] = mac[0];
+ s0 = swap16(s0) - event.mac[2];
+ s1 = s1 + event.mac[2];
+ w0 = swap32(w0);
+ b0 = b1
+ s2 = s0 + event.mac[2]
+ b1 = b0
+ w1 = swap32(w1) - event.mac[2];
+
+ parm->mac[3] is the total event counts that host requested.
+ event will be the same with the cmd's param.
+*/
+
+/* CMD param Format for driver extra cmd handler */
+struct drvextra_cmd_parm {
+ int ec_id; /* extra cmd id */
+ int type_size; /* Can use this field as the type id or command size */
+ unsigned char *pbuf;
+};
+
+/*------------------- Below are used for RF/BB tunning ---------------------*/
+
+struct setantenna_parm {
+ u8 tx_antset;
+ u8 rx_antset;
+ u8 tx_antenna;
+ u8 rx_antenna;
+};
+
+struct enrateadaptive_parm {
+ u32 en;
+};
+
+struct settxagctbl_parm {
+ u32 txagc[MAX_RATES_LENGTH];
+};
+
+struct gettxagctbl_parm {
+ u32 rsvd;
+};
+struct gettxagctbl_rsp {
+ u32 txagc[MAX_RATES_LENGTH];
+};
+
+struct setagcctrl_parm {
+ u32 agcctrl; /* 0: pure hw, 1: fw */
+};
+
+struct setssup_parm {
+ u32 ss_ForceUp[MAX_RATES_LENGTH];
+};
+
+struct getssup_parm {
+ u32 rsvd;
+};
+
+struct getssup_rsp {
+ u8 ss_ForceUp[MAX_RATES_LENGTH];
+};
+
+struct setssdlevel_parm {
+ u8 ss_DLevel[MAX_RATES_LENGTH];
+};
+
+struct getssdlevel_parm {
+ u32 rsvd;
+};
+
+struct getssdlevel_rsp {
+ u8 ss_DLevel[MAX_RATES_LENGTH];
+};
+
+struct setssulevel_parm {
+ u8 ss_ULevel[MAX_RATES_LENGTH];
+};
+
+struct getssulevel_parm {
+ u32 rsvd;
+};
+
+struct getssulevel_rsp {
+ u8 ss_ULevel[MAX_RATES_LENGTH];
+};
+
+struct setcountjudge_parm {
+ u8 count_judge[MAX_RATES_LENGTH];
+};
+
+struct getcountjudge_parm {
+ u32 rsvd;
+};
+
+struct getcountjudge_rsp {
+ u8 count_judge[MAX_RATES_LENGTH];
+};
+
+struct setratable_parm {
+ u8 ss_ForceUp[NumRates];
+ u8 ss_ULevel[NumRates];
+ u8 ss_DLevel[NumRates];
+ u8 count_judge[NumRates];
+};
+
+struct getratable_parm {
+ uint rsvd;
+};
+
+struct getratable_rsp {
+ u8 ss_ForceUp[NumRates];
+ u8 ss_ULevel[NumRates];
+ u8 ss_DLevel[NumRates];
+ u8 count_judge[NumRates];
+};
+
+/* to get TX,RX retry count */
+
+struct gettxretrycnt_parm {
+ unsigned int rsvd;
+};
+
+struct gettxretrycnt_rsp {
+ unsigned long tx_retrycnt;
+};
+
+struct getrxretrycnt_parm {
+ unsigned int rsvd;
+};
+
+struct getrxretrycnt_rsp {
+ unsigned long rx_retrycnt;
+};
+
+/* to get BCNOK,BCNERR count */
+struct getbcnokcnt_parm {
+ unsigned int rsvd;
+};
+
+struct getbcnokcnt_rsp {
+ unsigned long bcnokcnt;
+};
+
+struct getbcnerrcnt_parm {
+ unsigned int rsvd;
+};
+
+struct getbcnerrcnt_rsp {
+ unsigned long bcnerrcnt;
+};
+
+/* to get current TX power level */
+struct getcurtxpwrlevel_parm {
+ unsigned int rsvd;
+};
+struct getcurtxpwrlevel_rspi {
+ unsigned short tx_power;
+};
+
+struct setprobereqextraie_parm {
+ unsigned char e_id;
+ unsigned char ie_len;
+ unsigned char ie[0];
+};
+
+struct setassocreqextraie_parm {
+ unsigned char e_id;
+ unsigned char ie_len;
+ unsigned char ie[0];
+};
+
+struct setproberspextraie_parm {
+ unsigned char e_id;
+ unsigned char ie_len;
+ unsigned char ie[0];
+};
+
+struct setassocrspextraie_parm {
+ unsigned char e_id;
+ unsigned char ie_len;
+ unsigned char ie[0];
+};
+
+struct addBaReq_parm {
+ unsigned int tid;
+ u8 addr[ETH_ALEN];
+};
+
+/*H2C Handler index: 46 */
+struct set_ch_parm {
+ u8 ch;
+ u8 bw;
+ u8 ch_offset;
+};
+
+/*H2C Handler index: 59 */
+struct SetChannelPlan_param
+{
+ u8 channel_plan;
+};
+
+/*H2C Handler index: 60 */
+struct LedBlink_param
+{
+ struct LED_871x *pLed;
+};
+
+/*H2C Handler index: 61 */
+struct SetChannelSwitch_param
+{
+ u8 new_ch_no;
+};
+
+/*H2C Handler index: 62 */
+struct TDLSoption_param
+{
+ u8 addr[ETH_ALEN];
+ u8 option;
+};
+
+#define GEN_CMD_CODE(cmd) cmd ## _CMD_
+
+/*
+
+Result:
+0x00: success
+0x01: success, and check Response.
+0x02: cmd ignored due to duplicated sequcne number
+0x03: cmd dropped due to invalid cmd code
+0x04: reserved.
+
+*/
+
+#define H2C_RSP_OFFSET 512
+
+#define H2C_SUCCESS 0x00
+#define H2C_SUCCESS_RSP 0x01
+#define H2C_DUPLICATED 0x02
+#define H2C_DROPPED 0x03
+#define H2C_PARAMETERS_ERROR 0x04
+#define H2C_REJECTED 0x05
+#define H2C_CMD_OVERFLOW 0x06
+#define H2C_RESERVED 0x07
+
+u8 rtw_setassocsta_cmd(struct adapter *padapter, u8 *mac_addr);
+u8 rtw_setstandby_cmd(struct adapter *padapter, uint action);
+u8 rtw_sitesurvey_cmd(struct adapter *padapter, struct ndis_802_11_ssid *ssid,
+ int ssid_num, struct rtw_ieee80211_channel *ch,
+ int ch_num);
+u8 rtw_createbss_cmd(struct adapter *padapter);
+u8 rtw_createbss_cmd_ex(struct adapter *padapter, unsigned char *pbss,
+ unsigned int sz);
+u8 rtw_setphy_cmd(struct adapter *padapter, u8 modem, u8 ch);
+u8 rtw_setstakey_cmd(struct adapter *padapter, u8 *psta, u8 unicast_key);
+u8 rtw_clearstakey_cmd(struct adapter *padapter, u8 *psta, u8 entry, u8 enqueue);
+u8 rtw_joinbss_cmd(struct adapter *padapter, struct wlan_network* pnetwork);
+u8 rtw_disassoc_cmd(struct adapter *padapter, u32 deauth_timeout_ms, bool enqueue);
+u8 rtw_setopmode_cmd(struct adapter *padapter, enum ndis_802_11_network_infra networktype);
+u8 rtw_setdatarate_cmd(struct adapter *padapter, u8 *rateset);
+u8 rtw_setbasicrate_cmd(struct adapter *padapter, u8 *rateset);
+u8 rtw_setbbreg_cmd(struct adapter * padapter, u8 offset, u8 val);
+u8 rtw_setrfreg_cmd(struct adapter * padapter, u8 offset, u32 val);
+u8 rtw_getbbreg_cmd(struct adapter * padapter, u8 offset, u8 * pval);
+u8 rtw_getrfreg_cmd(struct adapter * padapter, u8 offset, u8 * pval);
+u8 rtw_setrfintfs_cmd(struct adapter *padapter, u8 mode);
+u8 rtw_setrttbl_cmd(struct adapter *padapter, struct setratable_parm *prate_table);
+u8 rtw_getrttbl_cmd(struct adapter *padapter, struct getratable_rsp *pval);
+
+u8 rtw_gettssi_cmd(struct adapter *padapter, u8 offset,u8 *pval);
+u8 rtw_setfwdig_cmd(struct adapter*padapter, u8 type);
+u8 rtw_setfwra_cmd(struct adapter*padapter, u8 type);
+
+u8 rtw_addbareq_cmd(struct adapter*padapter, u8 tid, u8 *addr);
+
+u8 rtw_dynamic_chk_wk_cmd(struct adapter *adapter);
+
+u8 rtw_lps_ctrl_wk_cmd(struct adapter*padapter, u8 lps_ctrl_type, u8 enqueue);
+u8 rtw_rpt_timer_cfg_cmd(struct adapter*padapter, u16 minRptTime);
+
+ u8 rtw_antenna_select_cmd(struct adapter*padapter, u8 antenna,u8 enqueue);
+u8 rtw_ps_cmd(struct adapter*padapter);
+
+#ifdef CONFIG_88EU_AP_MODE
+u8 rtw_chk_hi_queue_cmd(struct adapter*padapter);
+#endif
+
+u8 rtw_set_ch_cmd(struct adapter*padapter, u8 ch, u8 bw, u8 ch_offset, u8 enqueue);
+u8 rtw_set_chplan_cmd(struct adapter*padapter, u8 chplan, u8 enqueue);
+u8 rtw_led_blink_cmd(struct adapter*padapter, struct LED_871x * pLed);
+u8 rtw_set_csa_cmd(struct adapter*padapter, u8 new_ch_no);
+u8 rtw_tdls_cmd(struct adapter *padapter, u8 *addr, u8 option);
+
+u8 rtw_c2h_wk_cmd(struct adapter *padapter, u8 *c2h_evt);
+
+u8 rtw_drvextra_cmd_hdl(struct adapter *padapter, unsigned char *pbuf);
+
+void rtw_survey_cmd_callback(struct adapter *padapter, struct cmd_obj *pcmd);
+void rtw_disassoc_cmd_callback(struct adapter *padapter, struct cmd_obj *pcmd);
+void rtw_joinbss_cmd_callback(struct adapter *padapter, struct cmd_obj *pcmd);
+void rtw_createbss_cmd_callback(struct adapter *adapt, struct cmd_obj *pcmd);
+void rtw_getbbrfreg_cmdrsp_callback(struct adapter *adapt, struct cmd_obj *cmd);
+void rtw_readtssi_cmdrsp_callback(struct adapter *adapt, struct cmd_obj *cmd);
+
+void rtw_setstaKey_cmdrsp_callback(struct adapter *adapt, struct cmd_obj *cmd);
+void rtw_setassocsta_cmdrsp_callback(struct adapter *adapt, struct cmd_obj *cm);
+void rtw_getrttbl_cmdrsp_callback(struct adapter *adapt, struct cmd_obj *cmd);
+
+struct _cmd_callback {
+ u32 cmd_code;
+ void (*callback)(struct adapter *padapter, struct cmd_obj *cmd);
+};
+
+enum rtw_h2c_cmd {
+ GEN_CMD_CODE(_Read_MACREG), /*0*/
+ GEN_CMD_CODE(_Write_MACREG),
+ GEN_CMD_CODE(_Read_BBREG),
+ GEN_CMD_CODE(_Write_BBREG),
+ GEN_CMD_CODE(_Read_RFREG),
+ GEN_CMD_CODE(_Write_RFREG), /*5*/
+ GEN_CMD_CODE(_Read_EEPROM),
+ GEN_CMD_CODE(_Write_EEPROM),
+ GEN_CMD_CODE(_Read_EFUSE),
+ GEN_CMD_CODE(_Write_EFUSE),
+
+ GEN_CMD_CODE(_Read_CAM), /*10*/
+ GEN_CMD_CODE(_Write_CAM),
+ GEN_CMD_CODE(_setBCNITV),
+ GEN_CMD_CODE(_setMBIDCFG),
+ GEN_CMD_CODE(_JoinBss), /*14*/
+ GEN_CMD_CODE(_DisConnect), /*15*/
+ GEN_CMD_CODE(_CreateBss),
+ GEN_CMD_CODE(_SetOpMode),
+ GEN_CMD_CODE(_SiteSurvey), /*18*/
+ GEN_CMD_CODE(_SetAuth),
+
+ GEN_CMD_CODE(_SetKey), /*20*/
+ GEN_CMD_CODE(_SetStaKey),
+ GEN_CMD_CODE(_SetAssocSta),
+ GEN_CMD_CODE(_DelAssocSta),
+ GEN_CMD_CODE(_SetStaPwrState),
+ GEN_CMD_CODE(_SetBasicRate), /*25*/
+ GEN_CMD_CODE(_GetBasicRate),
+ GEN_CMD_CODE(_SetDataRate),
+ GEN_CMD_CODE(_GetDataRate),
+ GEN_CMD_CODE(_SetPhyInfo),
+
+ GEN_CMD_CODE(_GetPhyInfo), /*30*/
+ GEN_CMD_CODE(_SetPhy),
+ GEN_CMD_CODE(_GetPhy),
+ GEN_CMD_CODE(_readRssi),
+ GEN_CMD_CODE(_readGain),
+ GEN_CMD_CODE(_SetAtim), /*35*/
+ GEN_CMD_CODE(_SetPwrMode),
+ GEN_CMD_CODE(_JoinbssRpt),
+ GEN_CMD_CODE(_SetRaTable),
+ GEN_CMD_CODE(_GetRaTable),
+
+ GEN_CMD_CODE(_GetCCXReport), /*40*/
+ GEN_CMD_CODE(_GetDTMReport),
+ GEN_CMD_CODE(_GetTXRateStatistics),
+ GEN_CMD_CODE(_SetUsbSuspend),
+ GEN_CMD_CODE(_SetH2cLbk),
+ GEN_CMD_CODE(_AddBAReq), /*45*/
+ GEN_CMD_CODE(_SetChannel), /*46*/
+ GEN_CMD_CODE(_SetTxPower),
+ GEN_CMD_CODE(_SwitchAntenna),
+ GEN_CMD_CODE(_SetCrystalCap),
+ GEN_CMD_CODE(_SetSingleCarrierTx), /*50*/
+
+ GEN_CMD_CODE(_SetSingleToneTx),/*51*/
+ GEN_CMD_CODE(_SetCarrierSuppressionTx),
+ GEN_CMD_CODE(_SetContinuousTx),
+ GEN_CMD_CODE(_SwitchBandwidth), /*54*/
+ GEN_CMD_CODE(_TX_Beacon), /*55*/
+
+ GEN_CMD_CODE(_Set_MLME_EVT), /*56*/
+ GEN_CMD_CODE(_Set_Drv_Extra), /*57*/
+ GEN_CMD_CODE(_Set_H2C_MSG), /*58*/
+
+ GEN_CMD_CODE(_SetChannelPlan), /*59*/
+ GEN_CMD_CODE(_LedBlink), /*60*/
+
+ GEN_CMD_CODE(_SetChannelSwitch), /*61*/
+ GEN_CMD_CODE(_TDLS), /*62*/
+
+ MAX_H2CCMD
+};
+
+#define _GetBBReg_CMD_ _Read_BBREG_CMD_
+#define _SetBBReg_CMD_ _Write_BBREG_CMD_
+#define _GetRFReg_CMD_ _Read_RFREG_CMD_
+#define _SetRFReg_CMD_ _Write_RFREG_CMD_
+
+#ifdef _RTW_CMD_C_
+static struct _cmd_callback rtw_cmd_callback[] =
+{
+ {GEN_CMD_CODE(_Read_MACREG), NULL}, /*0*/
+ {GEN_CMD_CODE(_Write_MACREG), NULL},
+ {GEN_CMD_CODE(_Read_BBREG), &rtw_getbbrfreg_cmdrsp_callback},
+ {GEN_CMD_CODE(_Write_BBREG), NULL},
+ {GEN_CMD_CODE(_Read_RFREG), &rtw_getbbrfreg_cmdrsp_callback},
+ {GEN_CMD_CODE(_Write_RFREG), NULL}, /*5*/
+ {GEN_CMD_CODE(_Read_EEPROM), NULL},
+ {GEN_CMD_CODE(_Write_EEPROM), NULL},
+ {GEN_CMD_CODE(_Read_EFUSE), NULL},
+ {GEN_CMD_CODE(_Write_EFUSE), NULL},
+
+ {GEN_CMD_CODE(_Read_CAM), NULL}, /*10*/
+ {GEN_CMD_CODE(_Write_CAM), NULL},
+ {GEN_CMD_CODE(_setBCNITV), NULL},
+ {GEN_CMD_CODE(_setMBIDCFG), NULL},
+ {GEN_CMD_CODE(_JoinBss), &rtw_joinbss_cmd_callback}, /*14*/
+ {GEN_CMD_CODE(_DisConnect), &rtw_disassoc_cmd_callback}, /*15*/
+ {GEN_CMD_CODE(_CreateBss), &rtw_createbss_cmd_callback},
+ {GEN_CMD_CODE(_SetOpMode), NULL},
+ {GEN_CMD_CODE(_SiteSurvey), &rtw_survey_cmd_callback}, /*18*/
+ {GEN_CMD_CODE(_SetAuth), NULL},
+
+ {GEN_CMD_CODE(_SetKey), NULL}, /*20*/
+ {GEN_CMD_CODE(_SetStaKey), &rtw_setstaKey_cmdrsp_callback},
+ {GEN_CMD_CODE(_SetAssocSta), &rtw_setassocsta_cmdrsp_callback},
+ {GEN_CMD_CODE(_DelAssocSta), NULL},
+ {GEN_CMD_CODE(_SetStaPwrState), NULL},
+ {GEN_CMD_CODE(_SetBasicRate), NULL}, /*25*/
+ {GEN_CMD_CODE(_GetBasicRate), NULL},
+ {GEN_CMD_CODE(_SetDataRate), NULL},
+ {GEN_CMD_CODE(_GetDataRate), NULL},
+ {GEN_CMD_CODE(_SetPhyInfo), NULL},
+
+ {GEN_CMD_CODE(_GetPhyInfo), NULL}, /*30*/
+ {GEN_CMD_CODE(_SetPhy), NULL},
+ {GEN_CMD_CODE(_GetPhy), NULL},
+ {GEN_CMD_CODE(_readRssi), NULL},
+ {GEN_CMD_CODE(_readGain), NULL},
+ {GEN_CMD_CODE(_SetAtim), NULL}, /*35*/
+ {GEN_CMD_CODE(_SetPwrMode), NULL},
+ {GEN_CMD_CODE(_JoinbssRpt), NULL},
+ {GEN_CMD_CODE(_SetRaTable), NULL},
+ {GEN_CMD_CODE(_GetRaTable), NULL},
+
+ {GEN_CMD_CODE(_GetCCXReport), NULL}, /*40*/
+ {GEN_CMD_CODE(_GetDTMReport), NULL},
+ {GEN_CMD_CODE(_GetTXRateStatistics), NULL},
+ {GEN_CMD_CODE(_SetUsbSuspend), NULL},
+ {GEN_CMD_CODE(_SetH2cLbk), NULL},
+ {GEN_CMD_CODE(_AddBAReq), NULL}, /*45*/
+ {GEN_CMD_CODE(_SetChannel), NULL}, /*46*/
+ {GEN_CMD_CODE(_SetTxPower), NULL},
+ {GEN_CMD_CODE(_SwitchAntenna), NULL},
+ {GEN_CMD_CODE(_SetCrystalCap), NULL},
+ {GEN_CMD_CODE(_SetSingleCarrierTx), NULL}, /*50*/
+
+ {GEN_CMD_CODE(_SetSingleToneTx), NULL}, /*51*/
+ {GEN_CMD_CODE(_SetCarrierSuppressionTx), NULL},
+ {GEN_CMD_CODE(_SetContinuousTx), NULL},
+ {GEN_CMD_CODE(_SwitchBandwidth), NULL}, /*54*/
+ {GEN_CMD_CODE(_TX_Beacon), NULL},/*55*/
+
+ {GEN_CMD_CODE(_Set_MLME_EVT), NULL},/*56*/
+ {GEN_CMD_CODE(_Set_Drv_Extra), NULL},/*57*/
+ {GEN_CMD_CODE(_Set_H2C_MSG), NULL},/*58*/
+ {GEN_CMD_CODE(_SetChannelPlan), NULL},/*59*/
+ {GEN_CMD_CODE(_LedBlink), NULL},/*60*/
+
+ {GEN_CMD_CODE(_SetChannelSwitch), NULL},/*61*/
+ {GEN_CMD_CODE(_TDLS), NULL},/*62*/
+};
+#endif
+
+#endif /* _CMD_H_ */
diff --git a/drivers/staging/r8188eu/include/rtw_debug.h b/drivers/staging/r8188eu/include/rtw_debug.h
new file mode 100644
index 000000000000..d94639a8dc63
--- /dev/null
+++ b/drivers/staging/r8188eu/include/rtw_debug.h
@@ -0,0 +1,274 @@
+/******************************************************************************
+ *
+ * Copyright(c) 2007 - 2011 Realtek Corporation. All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of version 2 of the GNU General Public License as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
+ * more details.
+ *
+ * You should have received a copy of the GNU General Public License along with
+ * this program; if not, write to the Free Software Foundation, Inc.,
+ * 51 Franklin Street, Fifth Floor, Boston, MA 02110, USA
+ *
+ *
+ ******************************************************************************/
+#ifndef __RTW_DEBUG_H__
+#define __RTW_DEBUG_H__
+
+#include <osdep_service.h>
+#include <drv_types.h>
+
+#define _drv_always_ 1
+#define _drv_emerg_ 2
+#define _drv_alert_ 3
+#define _drv_crit_ 4
+#define _drv_err_ 5
+#define _drv_warning_ 6
+#define _drv_notice_ 7
+#define _drv_info_ 8
+#define _drv_debug_ 9
+
+#define _module_rtl871x_xmit_c_ BIT(0)
+#define _module_xmit_osdep_c_ BIT(1)
+#define _module_rtl871x_recv_c_ BIT(2)
+#define _module_recv_osdep_c_ BIT(3)
+#define _module_rtl871x_mlme_c_ BIT(4)
+#define _module_mlme_osdep_c_ BIT(5)
+#define _module_rtl871x_sta_mgt_c_ BIT(6)
+#define _module_rtl871x_cmd_c_ BIT(7)
+#define _module_cmd_osdep_c_ BIT(8)
+#define _module_rtl871x_io_c_ BIT(9)
+#define _module_io_osdep_c_ BIT(10)
+#define _module_os_intfs_c_ BIT(11)
+#define _module_rtl871x_security_c_ BIT(12)
+#define _module_rtl871x_eeprom_c_ BIT(13)
+#define _module_hal_init_c_ BIT(14)
+#define _module_hci_hal_init_c_ BIT(15)
+#define _module_rtl871x_ioctl_c_ BIT(16)
+#define _module_rtl871x_ioctl_set_c_ BIT(17)
+#define _module_rtl871x_ioctl_query_c_ BIT(18)
+#define _module_rtl871x_pwrctrl_c_ BIT(19)
+#define _module_hci_intfs_c_ BIT(20)
+#define _module_hci_ops_c_ BIT(21)
+#define _module_osdep_service_c_ BIT(22)
+#define _module_mp_ BIT(23)
+#define _module_hci_ops_os_c_ BIT(24)
+#define _module_rtl871x_ioctl_os_c BIT(25)
+#define _module_rtl8712_cmd_c_ BIT(26)
+#define _module_rtl8192c_xmit_c_ BIT(27)
+#define _module_hal_xmit_c_ BIT(28)
+#define _module_efuse_ BIT(29)
+#define _module_rtl8712_recv_c_ BIT(30)
+#define _module_rtl8712_led_c_ BIT(31)
+
+#define DRIVER_PREFIX "R8188EU: "
+
+extern u32 GlobalDebugLevel;
+
+#define DBG_88E_LEVEL(_level, fmt, arg...) \
+ do { \
+ if (_level <= GlobalDebugLevel) \
+ pr_info(DRIVER_PREFIX"INFO " fmt, ##arg); \
+ } while (0)
+
+#define DBG_88E(...) \
+ do { \
+ if (_drv_err_ <= GlobalDebugLevel) \
+ pr_info(DRIVER_PREFIX __VA_ARGS__); \
+ } while (0)
+
+#define MSG_88E(...) \
+ do { \
+ if (_drv_err_ <= GlobalDebugLevel) \
+ pr_info(DRIVER_PREFIX __VA_ARGS__); \
+ } while (0)
+
+#define RT_TRACE(_comp, _level, fmt) \
+ do { \
+ if (_level <= GlobalDebugLevel) { \
+ pr_info("%s [0x%08x,%d]", DRIVER_PREFIX, \
+ (unsigned int)_comp, _level); \
+ pr_info fmt; \
+ } \
+ } while (0)
+
+#define RT_PRINT_DATA(_comp, _level, _titlestring, _hexdata, _hexdatalen)\
+ do { \
+ if (_level <= GlobalDebugLevel) { \
+ int __i; \
+ u8 *ptr = (u8 *)_hexdata; \
+ pr_info("%s", DRIVER_PREFIX); \
+ pr_info(_titlestring); \
+ for (__i = 0; __i < (int)_hexdatalen; __i++ ) { \
+ pr_info("%02X%s", ptr[__i], \
+ (((__i + 1) % 4) == 0) ? \
+ " " : " "); \
+ if (((__i + 1) % 16) == 0) \
+ printk("\n"); \
+ } \
+ printk("\n"); \
+ } \
+ } while (0)
+
+int proc_get_drv_version(char *page, char **start,
+ off_t offset, int count,
+ int *eof, void *data);
+
+int proc_get_write_reg(char *page, char **start,
+ off_t offset, int count,
+ int *eof, void *data);
+
+int proc_set_write_reg(struct file *file, const char __user *buffer,
+ unsigned long count, void *data);
+int proc_get_read_reg(char *page, char **start,
+ off_t offset, int count,
+ int *eof, void *data);
+
+int proc_set_read_reg(struct file *file, const char __user *buffer,
+ unsigned long count, void *data);
+
+int proc_get_fwstate(char *page, char **start,
+ off_t offset, int count,
+ int *eof, void *data);
+int proc_get_sec_info(char *page, char **start,
+ off_t offset, int count,
+ int *eof, void *data);
+int proc_get_mlmext_state(char *page, char **start,
+ off_t offset, int count,
+ int *eof, void *data);
+
+int proc_get_qos_option(char *page, char **start,
+ off_t offset, int count,
+ int *eof, void *data);
+int proc_get_ht_option(char *page, char **start,
+ off_t offset, int count,
+ int *eof, void *data);
+int proc_get_rf_info(char *page, char **start,
+ off_t offset, int count,
+ int *eof, void *data);
+int proc_get_ap_info(char *page, char **start,
+ off_t offset, int count,
+ int *eof, void *data);
+
+int proc_get_adapter_state(char *page, char **start,
+ off_t offset, int count,
+ int *eof, void *data);
+
+int proc_get_trx_info(char *page, char **start,
+ off_t offset, int count,
+ int *eof, void *data);
+
+int proc_get_mac_reg_dump1(char *page, char **start,
+ off_t offset, int count,
+ int *eof, void *data);
+
+int proc_get_mac_reg_dump2(char *page, char **start,
+ off_t offset, int count,
+ int *eof, void *data);
+
+int proc_get_mac_reg_dump3(char *page, char **start,
+ off_t offset, int count,
+ int *eof, void *data);
+
+int proc_get_bb_reg_dump1(char *page, char **start,
+ off_t offset, int count,
+ int *eof, void *data);
+
+int proc_get_bb_reg_dump2(char *page, char **start,
+ off_t offset, int count,
+ int *eof, void *data);
+
+int proc_get_bb_reg_dump3(char *page, char **start,
+ off_t offset, int count,
+ int *eof, void *data);
+
+int proc_get_rf_reg_dump1(char *page, char **start,
+ off_t offset, int count,
+ int *eof, void *data);
+
+int proc_get_rf_reg_dump2(char *page, char **start,
+ off_t offset, int count,
+ int *eof, void *data);
+
+int proc_get_rf_reg_dump3(char *page, char **start,
+ off_t offset, int count,
+ int *eof, void *data);
+
+int proc_get_rf_reg_dump4(char *page, char **start,
+ off_t offset, int count,
+ int *eof, void *data);
+
+#ifdef CONFIG_88EU_AP_MODE
+
+int proc_get_all_sta_info(char *page, char **start,
+ off_t offset, int count,
+ int *eof, void *data);
+
+#endif
+
+int proc_get_best_channel(char *page, char **start,
+ off_t offset, int count,
+ int *eof, void *data);
+
+int proc_get_rx_signal(char *page, char **start,
+ off_t offset, int count,
+ int *eof, void *data);
+
+int proc_set_rx_signal(struct file *file, const char __user *buffer,
+ unsigned long count, void *data);
+
+int proc_get_ht_enable(char *page, char **start,
+ off_t offset, int count,
+ int *eof, void *data);
+
+int proc_set_ht_enable(struct file *file, const char __user *buffer,
+ unsigned long count, void *data);
+
+int proc_get_cbw40_enable(char *page, char **start,
+ off_t offset, int count,
+ int *eof, void *data);
+
+int proc_set_cbw40_enable(struct file *file, const char __user *buffer,
+ unsigned long count, void *data);
+
+int proc_get_ampdu_enable(char *page, char **start,
+ off_t offset, int count,
+ int *eof, void *data);
+
+int proc_set_ampdu_enable(struct file *file, const char __user *buffer,
+ unsigned long count, void *data);
+
+int proc_get_rx_stbc(char *page, char **start,
+ off_t offset, int count,
+ int *eof, void *data);
+
+int proc_set_rx_stbc(struct file *file, const char __user *buffer,
+ unsigned long count, void *data);
+
+int proc_get_two_path_rssi(char *page, char **start,
+ off_t offset, int count,
+ int *eof, void *data);
+
+int proc_get_rssi_disp(char *page, char **start,
+ off_t offset, int count,
+ int *eof, void *data);
+
+int proc_set_rssi_disp(struct file *file, const char __user *buffer,
+ unsigned long count, void *data);
+
+#ifdef CONFIG_BT_COEXIST
+int proc_get_btcoex_dbg(char *page, char **start,
+ off_t offset, int count,
+ int *eof, void *data);
+
+int proc_set_btcoex_dbg(struct file *file, const char *buffer,
+ signed long count, void *data);
+
+#endif /* CONFIG_BT_COEXIST */
+
+#endif /* __RTW_DEBUG_H__ */
diff --git a/drivers/staging/r8188eu/include/rtw_eeprom.h b/drivers/staging/r8188eu/include/rtw_eeprom.h
new file mode 100644
index 000000000000..0b27eb7325c5
--- /dev/null
+++ b/drivers/staging/r8188eu/include/rtw_eeprom.h
@@ -0,0 +1,130 @@
+/******************************************************************************
+ *
+ * Copyright(c) 2007 - 2011 Realtek Corporation. All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of version 2 of the GNU General Public License as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
+ * more details.
+ *
+ * You should have received a copy of the GNU General Public License along with
+ * this program; if not, write to the Free Software Foundation, Inc.,
+ * 51 Franklin Street, Fifth Floor, Boston, MA 02110, USA
+ *
+ *
+ ******************************************************************************/
+#ifndef __RTW_EEPROM_H__
+#define __RTW_EEPROM_H__
+
+#include <osdep_service.h>
+#include <drv_types.h>
+
+#define RTL8712_EEPROM_ID 0x8712
+
+#define HWSET_MAX_SIZE_512 512
+#define EEPROM_MAX_SIZE HWSET_MAX_SIZE_512
+
+#define CLOCK_RATE 50 /* 100us */
+
+/* EEPROM opcodes */
+#define EEPROM_READ_OPCODE 06
+#define EEPROM_WRITE_OPCODE 05
+#define EEPROM_ERASE_OPCODE 07
+#define EEPROM_EWEN_OPCODE 19 /* Erase/write enable */
+#define EEPROM_EWDS_OPCODE 16 /* Erase/write disable */
+
+/* Country codes */
+#define USA 0x555320
+#define EUROPE 0x1 /* temp, should be provided later */
+#define JAPAN 0x2 /* temp, should be provided later */
+
+#define EEPROM_CID_DEFAULT 0x0
+#define EEPROM_CID_ALPHA 0x1
+#define EEPROM_CID_Senao 0x3
+#define EEPROM_CID_NetCore 0x5
+#define EEPROM_CID_CAMEO 0X8
+#define EEPROM_CID_SITECOM 0x9
+#define EEPROM_CID_COREGA 0xB
+#define EEPROM_CID_EDIMAX_BELK 0xC
+#define EEPROM_CID_SERCOMM_BELK 0xE
+#define EEPROM_CID_CAMEO1 0xF
+#define EEPROM_CID_WNC_COREGA 0x12
+#define EEPROM_CID_CLEVO 0x13
+#define EEPROM_CID_WHQL 0xFE
+
+/* Customer ID, note that: */
+/* This variable is initiailzed through EEPROM or registry, */
+/* however, its definition may be different with that in EEPROM for */
+/* EEPROM size consideration. So, we have to perform proper translation
+ * between them. */
+/* Besides, CustomerID of registry has precedence of that of EEPROM. */
+/* defined below. 060703, by rcnjko. */
+enum RT_CUSTOMER_ID {
+ RT_CID_DEFAULT = 0,
+ RT_CID_8187_ALPHA0 = 1,
+ RT_CID_8187_SERCOMM_PS = 2,
+ RT_CID_8187_HW_LED = 3,
+ RT_CID_8187_NETGEAR = 4,
+ RT_CID_WHQL = 5,
+ RT_CID_819x_CAMEO = 6,
+ RT_CID_819x_RUNTOP = 7,
+ RT_CID_819x_Senao = 8,
+ RT_CID_TOSHIBA = 9, /* Merge by Jacken, 2008/01/31. */
+ RT_CID_819x_Netcore = 10,
+ RT_CID_Nettronix = 11,
+ RT_CID_DLINK = 12,
+ RT_CID_PRONET = 13,
+ RT_CID_COREGA = 14,
+ RT_CID_CHINA_MOBILE = 15,
+ RT_CID_819x_ALPHA = 16,
+ RT_CID_819x_Sitecom = 17,
+ RT_CID_CCX = 18, /* It's set under CCX logo test and isn't demanded
+ * for CCX functions, but for test behavior like retry
+ * limit and tx report. By Bruce, 2009-02-17. */
+ RT_CID_819x_Lenovo = 19,
+ RT_CID_819x_QMI = 20,
+ RT_CID_819x_Edimax_Belkin = 21,
+ RT_CID_819x_Sercomm_Belkin = 22,
+ RT_CID_819x_CAMEO1 = 23,
+ RT_CID_819x_MSI = 24,
+ RT_CID_819x_Acer = 25,
+ RT_CID_819x_AzWave_ASUS = 26,
+ RT_CID_819x_AzWave = 27, /* For AzWave in PCIe,i
+ * The ID is AzWave use and not only Asus */
+ RT_CID_819x_HP = 28,
+ RT_CID_819x_WNC_COREGA = 29,
+ RT_CID_819x_Arcadyan_Belkin = 30,
+ RT_CID_819x_SAMSUNG = 31,
+ RT_CID_819x_CLEVO = 32,
+ RT_CID_819x_DELL = 33,
+ RT_CID_819x_PRONETS = 34,
+ RT_CID_819x_Edimax_ASUS = 35,
+ RT_CID_819x_CAMEO_NETGEAR = 36,
+ RT_CID_PLANEX = 37,
+ RT_CID_CC_C = 38,
+ RT_CID_819x_Xavi = 39,
+ RT_CID_819x_FUNAI_TV = 40,
+ RT_CID_819x_ALPHA_WD=41,
+};
+
+struct eeprom_priv {
+ u8 bautoload_fail_flag;
+ u8 bloadfile_fail_flag;
+ u8 bloadmac_fail_flag;
+ u8 mac_addr[6]; /* PermanentAddress */
+ u16 channel_plan;
+ u8 EepromOrEfuse;
+ u8 efuse_eeprom_data[HWSET_MAX_SIZE_512] __aligned(4);
+};
+
+void eeprom_write16(struct adapter *padapter, u16 reg, u16 data);
+u16 eeprom_read16(struct adapter *padapter, u16 reg);
+void read_eeprom_content(struct adapter *padapter);
+void eeprom_read_sz(struct adapter *adapt, u16 reg, u8 *data, u32 sz);
+void read_eeprom_content_by_attrib(struct adapter *padapter);
+
+#endif /* __RTL871X_EEPROM_H__ */
diff --git a/drivers/staging/r8188eu/include/rtw_efuse.h b/drivers/staging/r8188eu/include/rtw_efuse.h
new file mode 100644
index 000000000000..cee6b5e8b070
--- /dev/null
+++ b/drivers/staging/r8188eu/include/rtw_efuse.h
@@ -0,0 +1,150 @@
+/******************************************************************************
+ *
+ * Copyright(c) 2007 - 2011 Realtek Corporation. All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of version 2 of the GNU General Public License as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
+ * more details.
+ *
+ * You should have received a copy of the GNU General Public License along with
+ * this program; if not, write to the Free Software Foundation, Inc.,
+ * 51 Franklin Street, Fifth Floor, Boston, MA 02110, USA
+ *
+ *
+ ******************************************************************************/
+#ifndef __RTW_EFUSE_H__
+#define __RTW_EFUSE_H__
+
+#include <osdep_service.h>
+
+#define EFUSE_ERROE_HANDLE 1
+
+#define PG_STATE_HEADER 0x01
+#define PG_STATE_WORD_0 0x02
+#define PG_STATE_WORD_1 0x04
+#define PG_STATE_WORD_2 0x08
+#define PG_STATE_WORD_3 0x10
+#define PG_STATE_DATA 0x20
+
+#define PG_SWBYTE_H 0x01
+#define PG_SWBYTE_L 0x02
+
+#define PGPKT_DATA_SIZE 8
+
+#define EFUSE_WIFI 0
+#define EFUSE_BT 1
+
+enum _EFUSE_DEF_TYPE {
+ TYPE_EFUSE_MAX_SECTION = 0,
+ TYPE_EFUSE_REAL_CONTENT_LEN = 1,
+ TYPE_AVAILABLE_EFUSE_BYTES_BANK = 2,
+ TYPE_AVAILABLE_EFUSE_BYTES_TOTAL = 3,
+ TYPE_EFUSE_MAP_LEN = 4,
+ TYPE_EFUSE_PROTECT_BYTES_BANK = 5,
+ TYPE_EFUSE_CONTENT_LEN_BANK = 6,
+};
+
+/* E-Fuse */
+#define EFUSE_MAP_SIZE 512
+#define EFUSE_MAX_SIZE 256
+/* end of E-Fuse */
+
+#define EFUSE_MAX_MAP_LEN 512
+#define EFUSE_MAX_HW_SIZE 512
+#define EFUSE_MAX_SECTION_BASE 16
+
+#define EXT_HEADER(header) ((header & 0x1F) == 0x0F)
+#define ALL_WORDS_DISABLED(wde) ((wde & 0x0F) == 0x0F)
+#define GET_HDR_OFFSET_2_0(header) ((header & 0xE0) >> 5)
+
+#define EFUSE_REPEAT_THRESHOLD_ 3
+
+/* The following is for BT Efuse definition */
+#define EFUSE_BT_MAX_MAP_LEN 1024
+#define EFUSE_MAX_BANK 4
+#define EFUSE_MAX_BT_BANK (EFUSE_MAX_BANK-1)
+/*--------------------------Define Parameters-------------------------------*/
+#define EFUSE_MAX_WORD_UNIT 4
+
+/*------------------------------Define structure----------------------------*/
+struct pgpkt {
+ u8 offset;
+ u8 word_en;
+ u8 data[8];
+ u8 word_cnts;
+};
+
+/*------------------------------Define structure----------------------------*/
+struct efuse_hal {
+ u8 fakeEfuseBank;
+ u32 fakeEfuseUsedBytes;
+ u8 fakeEfuseContent[EFUSE_MAX_HW_SIZE];
+ u8 fakeEfuseInitMap[EFUSE_MAX_MAP_LEN];
+ u8 fakeEfuseModifiedMap[EFUSE_MAX_MAP_LEN];
+
+ u16 BTEfuseUsedBytes;
+ u8 BTEfuseUsedPercentage;
+ u8 BTEfuseContent[EFUSE_MAX_BT_BANK][EFUSE_MAX_HW_SIZE];
+ u8 BTEfuseInitMap[EFUSE_BT_MAX_MAP_LEN];
+ u8 BTEfuseModifiedMap[EFUSE_BT_MAX_MAP_LEN];
+
+ u16 fakeBTEfuseUsedBytes;
+ u8 fakeBTEfuseContent[EFUSE_MAX_BT_BANK][EFUSE_MAX_HW_SIZE];
+ u8 fakeBTEfuseInitMap[EFUSE_BT_MAX_MAP_LEN];
+ u8 fakeBTEfuseModifiedMap[EFUSE_BT_MAX_MAP_LEN];
+};
+
+/*------------------------Export global variable----------------------------*/
+extern u8 fakeEfuseBank;
+extern u32 fakeEfuseUsedBytes;
+extern u8 fakeEfuseContent[];
+extern u8 fakeEfuseInitMap[];
+extern u8 fakeEfuseModifiedMap[];
+
+extern u32 BTEfuseUsedBytes;
+extern u8 BTEfuseContent[EFUSE_MAX_BT_BANK][EFUSE_MAX_HW_SIZE];
+extern u8 BTEfuseInitMap[];
+extern u8 BTEfuseModifiedMap[];
+
+extern u32 fakeBTEfuseUsedBytes;
+extern u8 fakeBTEfuseContent[EFUSE_MAX_BT_BANK][EFUSE_MAX_HW_SIZE];
+extern u8 fakeBTEfuseInitMap[];
+extern u8 fakeBTEfuseModifiedMap[];
+/*------------------------Export global variable----------------------------*/
+
+u8 efuse_GetCurrentSize(struct adapter *adapter, u16 *size);
+u16 efuse_GetMaxSize(struct adapter *adapter);
+u8 rtw_efuse_access(struct adapter *adapter, u8 read, u16 start_addr,
+ u16 cnts, u8 *data);
+u8 rtw_efuse_map_read(struct adapter *adapter, u16 addr, u16 cnts, u8 *data);
+u8 rtw_efuse_map_write(struct adapter *adapter, u16 addr, u16 cnts, u8 *data);
+u8 rtw_BT_efuse_map_read(struct adapter *adapter, u16 addr,
+ u16 cnts, u8 *data);
+u8 rtw_BT_efuse_map_write(struct adapter *adapter, u16 addr,
+ u16 cnts, u8 *data);
+u16 Efuse_GetCurrentSize(struct adapter *adapter, u8 efusetype, bool test);
+u8 Efuse_CalculateWordCnts(u8 word_en);
+void ReadEFuseByte(struct adapter *adapter, u16 _offset, u8 *pbuf, bool test);
+void EFUSE_GetEfuseDefinition(struct adapter *adapt, u8 type, u8 type1,
+ void *out, bool bPseudoTest);
+u8 efuse_OneByteRead(struct adapter *adapter, u16 addr, u8 *data, bool test);
+u8 efuse_OneByteWrite(struct adapter *adapter, u16 addr, u8 data, bool test);
+
+void Efuse_PowerSwitch(struct adapter *adapt,u8 bWrite,u8 PwrState);
+int Efuse_PgPacketRead(struct adapter *adapt, u8 offset, u8 *data, bool test);
+int Efuse_PgPacketWrite(struct adapter *adapter, u8 offset, u8 word, u8 *data,
+ bool test);
+void efuse_WordEnableDataRead(u8 word_en, u8 *sourdata, u8 *targetdata);
+u8 Efuse_WordEnableDataWrite(struct adapter *adapter, u16 efuse_addr,
+ u8 word_en, u8 *data, bool test);
+
+u8 EFUSE_Read1Byte(struct adapter *adapter, u16 address);
+void EFUSE_ShadowMapUpdate(struct adapter *adapter, u8 efusetype, bool test);
+void EFUSE_ShadowRead(struct adapter *adapt, u8 type, u16 offset, u32 *val);
+
+#endif
diff --git a/drivers/staging/r8188eu/include/rtw_event.h b/drivers/staging/r8188eu/include/rtw_event.h
new file mode 100644
index 000000000000..f7004d6a3bbb
--- /dev/null
+++ b/drivers/staging/r8188eu/include/rtw_event.h
@@ -0,0 +1,113 @@
+/******************************************************************************
+ *
+ * Copyright(c) 2007 - 2011 Realtek Corporation. All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of version 2 of the GNU General Public License as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
+ * more details.
+ *
+ * You should have received a copy of the GNU General Public License along with
+ * this program; if not, write to the Free Software Foundation, Inc.,
+ * 51 Franklin Street, Fifth Floor, Boston, MA 02110, USA
+ *
+ *
+ ******************************************************************************/
+#ifndef _RTW_EVENT_H_
+#define _RTW_EVENT_H_
+
+#include <osdep_service.h>
+
+#include <wlan_bssdef.h>
+#include <linux/semaphore.h>
+#include <linux/sem.h>
+
+/*
+Used to report a bss has been scanned
+*/
+struct survey_event {
+ struct wlan_bssid_ex bss;
+};
+
+/*
+Used to report that the requested site survey has been done.
+
+bss_cnt indicates the number of bss that has been reported.
+
+*/
+struct surveydone_event {
+ unsigned int bss_cnt;
+
+};
+
+/*
+Used to report the link result of joinning the given bss
+
+join_res:
+-1: authentication fail
+-2: association fail
+> 0: TID
+
+*/
+struct joinbss_event {
+ struct wlan_network network;
+};
+
+/*
+Used to report a given STA has joinned the created BSS.
+It is used in AP/Ad-HoC(M) mode.
+*/
+
+struct stassoc_event {
+ unsigned char macaddr[6];
+ unsigned char rsvd[2];
+ int cam_id;
+};
+
+struct stadel_event {
+ unsigned char macaddr[6];
+ unsigned char rsvd[2]; /* for reason */
+ int mac_id;
+};
+
+struct addba_event {
+ unsigned int tid;
+};
+
+#define GEN_EVT_CODE(event) event ## _EVT_
+
+struct fwevent {
+ u32 parmsize;
+ void (*event_callback)(struct adapter *dev, u8 *pbuf);
+};
+
+#define C2HEVENT_SZ 32
+
+struct event_node {
+ unsigned char *node;
+ unsigned char evt_code;
+ unsigned short evt_sz;
+ int *caller_ff_tail;
+ int caller_ff_sz;
+};
+
+struct c2hevent_queue {
+ int head;
+ int tail;
+ struct event_node nodes[C2HEVENT_SZ];
+ unsigned char seq;
+};
+
+#define NETWORK_QUEUE_SZ 4
+
+struct network_queue {
+ int head;
+ int tail;
+ struct wlan_bssid_ex networks[NETWORK_QUEUE_SZ];
+};
+
+#endif /* _WLANEVENT_H_ */
diff --git a/drivers/staging/r8188eu/include/rtw_ht.h b/drivers/staging/r8188eu/include/rtw_ht.h
new file mode 100644
index 000000000000..80154224af92
--- /dev/null
+++ b/drivers/staging/r8188eu/include/rtw_ht.h
@@ -0,0 +1,44 @@
+/******************************************************************************
+ *
+ * Copyright(c) 2007 - 2011 Realtek Corporation. All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of version 2 of the GNU General Public License as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
+ * more details.
+ *
+ * You should have received a copy of the GNU General Public License along with
+ * this program; if not, write to the Free Software Foundation, Inc.,
+ * 51 Franklin Street, Fifth Floor, Boston, MA 02110, USA
+ *
+ *
+ ******************************************************************************/
+#ifndef _RTW_HT_H_
+#define _RTW_HT_H_
+
+#include <osdep_service.h>
+#include "wifi.h"
+
+struct ht_priv {
+ u32 ht_option;
+ u32 ampdu_enable;/* for enable Tx A-MPDU */
+ u32 tx_amsdu_enable;/* for enable Tx A-MSDU */
+ u32 tx_amdsu_maxlen; /* 1: 8k, 0:4k ; default:8k, for tx */
+ u32 rx_ampdu_maxlen; /* for rx reordering ctrl win_sz,
+ * updated when join_callback. */
+ u8 bwmode;/* */
+ u8 ch_offset;/* PRIME_CHNL_OFFSET */
+ u8 sgi;/* short GI */
+
+ /* for processing Tx A-MPDU */
+ u8 agg_enable_bitmap;
+ u8 candidate_tid_bitmap;
+
+ struct ieee80211_ht_cap ht_cap;
+};
+
+#endif /* _RTL871X_HT_H_ */
diff --git a/drivers/staging/r8188eu/include/rtw_io.h b/drivers/staging/r8188eu/include/rtw_io.h
new file mode 100644
index 000000000000..d7dee537c252
--- /dev/null
+++ b/drivers/staging/r8188eu/include/rtw_io.h
@@ -0,0 +1,387 @@
+/******************************************************************************
+ *
+ * Copyright(c) 2007 - 2011 Realtek Corporation. All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of version 2 of the GNU General Public License as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
+ * more details.
+ *
+ * You should have received a copy of the GNU General Public License along with
+ * this program; if not, write to the Free Software Foundation, Inc.,
+ * 51 Franklin Street, Fifth Floor, Boston, MA 02110, USA
+ *
+ *
+ ******************************************************************************/
+
+#ifndef _RTW_IO_H_
+#define _RTW_IO_H_
+
+#include <osdep_service.h>
+#include <osdep_intf.h>
+
+#include <asm/byteorder.h>
+#include <linux/semaphore.h>
+#include <linux/list.h>
+#include <linux/spinlock.h>
+#include <asm/atomic.h>
+
+#include <linux/usb.h>
+#include <linux/usb/ch9.h>
+
+#define rtw_usb_buffer_alloc(dev, size, dma) \
+ usb_alloc_coherent((dev), (size), (in_interrupt() ? \
+ GFP_ATOMIC : GFP_KERNEL), (dma))
+#define rtw_usb_buffer_free(dev, size, addr, dma) \
+ usb_free_coherent((dev), (size), (addr), (dma))
+
+#define NUM_IOREQ 8
+
+#define MAX_PROT_SZ (64-16)
+
+#define _IOREADY 0
+#define _IO_WAIT_COMPLETE 1
+#define _IO_WAIT_RSP 2
+
+/* IO COMMAND TYPE */
+#define _IOSZ_MASK_ (0x7F)
+#define _IO_WRITE_ BIT(7)
+#define _IO_FIXED_ BIT(8)
+#define _IO_BURST_ BIT(9)
+#define _IO_BYTE_ BIT(10)
+#define _IO_HW_ BIT(11)
+#define _IO_WORD_ BIT(12)
+#define _IO_SYNC_ BIT(13)
+#define _IO_CMDMASK_ (0x1F80)
+
+/*
+ For prompt mode accessing, caller shall free io_req
+ Otherwise, io_handler will free io_req
+*/
+
+/* IO STATUS TYPE */
+#define _IO_ERR_ BIT(2)
+#define _IO_SUCCESS_ BIT(1)
+#define _IO_DONE_ BIT(0)
+
+#define IO_RD32 (_IO_SYNC_ | _IO_WORD_)
+#define IO_RD16 (_IO_SYNC_ | _IO_HW_)
+#define IO_RD8 (_IO_SYNC_ | _IO_BYTE_)
+
+#define IO_RD32_ASYNC (_IO_WORD_)
+#define IO_RD16_ASYNC (_IO_HW_)
+#define IO_RD8_ASYNC (_IO_BYTE_)
+
+#define IO_WR32 (_IO_WRITE_ | _IO_SYNC_ | _IO_WORD_)
+#define IO_WR16 (_IO_WRITE_ | _IO_SYNC_ | _IO_HW_)
+#define IO_WR8 (_IO_WRITE_ | _IO_SYNC_ | _IO_BYTE_)
+
+#define IO_WR32_ASYNC (_IO_WRITE_ | _IO_WORD_)
+#define IO_WR16_ASYNC (_IO_WRITE_ | _IO_HW_)
+#define IO_WR8_ASYNC (_IO_WRITE_ | _IO_BYTE_)
+
+/*
+ Only Sync. burst accessing is provided.
+*/
+
+#define IO_WR_BURST(x) \
+ (_IO_WRITE_ | _IO_SYNC_ | _IO_BURST_ | ((x) & _IOSZ_MASK_))
+#define IO_RD_BURST(x) \
+ (_IO_SYNC_ | _IO_BURST_ | ((x) & _IOSZ_MASK_))
+
+/* below is for the intf_option bit defition... */
+
+#define _INTF_ASYNC_ BIT(0) /* support async io */
+
+struct intf_priv;
+struct intf_hdl;
+struct io_queue;
+
+struct _io_ops {
+ u8 (*_read8)(struct intf_hdl *pintfhdl, u32 addr);
+ u16 (*_read16)(struct intf_hdl *pintfhdl, u32 addr);
+ u32 (*_read32)(struct intf_hdl *pintfhdl, u32 addr);
+ int (*_write8)(struct intf_hdl *pintfhdl, u32 addr, u8 val);
+ int (*_write16)(struct intf_hdl *pintfhdl, u32 addr, u16 val);
+ int (*_write32)(struct intf_hdl *pintfhdl, u32 addr, u32 val);
+ int (*_writeN)(struct intf_hdl *pintfhdl, u32 addr, u32 length,
+ u8 *pdata);
+ int (*_write8_async)(struct intf_hdl *pintfhdl, u32 addr, u8 val);
+ int (*_write16_async)(struct intf_hdl *pintfhdl, u32 addr, u16 val);
+ int (*_write32_async)(struct intf_hdl *pintfhdl, u32 addr, u32 val);
+ void (*_read_mem)(struct intf_hdl *pintfhdl, u32 addr, u32 cnt,
+ u8 *pmem);
+ void (*_write_mem)(struct intf_hdl *pintfhdl, u32 addr, u32 cnt,
+ u8 *pmem);
+ void (*_sync_irp_protocol_rw)(struct io_queue *pio_q);
+ u32 (*_read_interrupt)(struct intf_hdl *pintfhdl, u32 addr);
+ u32 (*_read_port)(struct intf_hdl *pintfhdl, u32 addr, u32 cnt,
+ u8 *pmem);
+ u32 (*_write_port)(struct intf_hdl *pintfhdl, u32 addr, u32 cnt,
+ u8 *pmem);
+ u32 (*_write_scsi)(struct intf_hdl *pintfhdl,u32 cnt, u8 *pmem);
+ void (*_read_port_cancel)(struct intf_hdl *pintfhdl);
+ void (*_write_port_cancel)(struct intf_hdl *pintfhdl);
+};
+
+struct io_req {
+ struct list_head list;
+ u32 addr;
+ u32 val;
+ u32 command;
+ u32 status;
+ u8 *pbuf;
+ struct semaphore sema;
+
+ void (*_async_io_callback)(struct adapter *padater,
+ struct io_req *pio_req, u8 *cnxt);
+ u8 *cnxt;
+};
+
+struct intf_hdl {
+ struct adapter *padapter;
+ struct dvobj_priv *pintf_dev;
+ struct _io_ops io_ops;
+};
+
+struct reg_protocol_rd {
+#ifdef __LITTLE_ENDIAN
+ /* DW1 */
+ u32 NumOfTrans:4;
+ u32 Reserved1:4;
+ u32 Reserved2:24;
+ /* DW2 */
+ u32 ByteCount:7;
+ u32 WriteEnable:1; /* 0:read, 1:write */
+ u32 FixOrContinuous:1; /* 0:continuous, 1: Fix */
+ u32 BurstMode:1;
+ u32 Byte1Access:1;
+ u32 Byte2Access:1;
+ u32 Byte4Access:1;
+ u32 Reserved3:3;
+ u32 Reserved4:16;
+ /* DW3 */
+ u32 BusAddress;
+ /* DW4 */
+ /* u32 Value; */
+#else
+/* DW1 */
+ u32 Reserved1:4;
+ u32 NumOfTrans:4;
+ u32 Reserved2:24;
+ /* DW2 */
+ u32 WriteEnable:1;
+ u32 ByteCount:7;
+ u32 Reserved3:3;
+ u32 Byte4Access:1;
+
+ u32 Byte2Access:1;
+ u32 Byte1Access:1;
+ u32 BurstMode:1;
+ u32 FixOrContinuous:1;
+ u32 Reserved4:16;
+ /* DW3 */
+ u32 BusAddress;
+
+ /* DW4 */
+#endif
+};
+
+struct reg_protocol_wt {
+#ifdef __LITTLE_ENDIAN
+ /* DW1 */
+ u32 NumOfTrans:4;
+ u32 Reserved1:4;
+ u32 Reserved2:24;
+ /* DW2 */
+ u32 ByteCount:7;
+ u32 WriteEnable:1; /* 0:read, 1:write */
+ u32 FixOrContinuous:1; /* 0:continuous, 1: Fix */
+ u32 BurstMode:1;
+ u32 Byte1Access:1;
+ u32 Byte2Access:1;
+ u32 Byte4Access:1;
+ u32 Reserved3:3;
+ u32 Reserved4:16;
+ /* DW3 */
+ u32 BusAddress;
+ /* DW4 */
+ u32 Value;
+#else
+ /* DW1 */
+ u32 Reserved1 :4;
+ u32 NumOfTrans:4;
+ u32 Reserved2:24;
+ /* DW2 */
+ u32 WriteEnable:1;
+ u32 ByteCount:7;
+ u32 Reserved3:3;
+ u32 Byte4Access:1;
+ u32 Byte2Access:1;
+ u32 Byte1Access:1;
+ u32 BurstMode:1;
+ u32 FixOrContinuous:1;
+ u32 Reserved4:16;
+ /* DW3 */
+ u32 BusAddress;
+ /* DW4 */
+ u32 Value;
+#endif
+};
+
+/*
+Below is the data structure used by _io_handler
+*/
+
+struct io_queue {
+ spinlock_t lock;
+ struct list_head free_ioreqs;
+ struct list_head pending; /* The io_req list that will be served
+ * in the single protocol read/write.*/
+ struct list_head processing;
+ u8 *free_ioreqs_buf; /* 4-byte aligned */
+ u8 *pallocated_free_ioreqs_buf;
+ struct intf_hdl intf;
+};
+
+struct io_priv {
+ struct adapter *padapter;
+ struct intf_hdl intf;
+};
+
+uint ioreq_flush(struct adapter *adapter, struct io_queue *ioqueue);
+void sync_ioreq_enqueue(struct io_req *preq,struct io_queue *ioqueue);
+uint sync_ioreq_flush(struct adapter *adapter, struct io_queue *ioqueue);
+uint free_ioreq(struct io_req *preq, struct io_queue *pio_queue);
+struct io_req *alloc_ioreq(struct io_queue *pio_q);
+
+uint register_intf_hdl(u8 *dev, struct intf_hdl *pintfhdl);
+void unregister_intf_hdl(struct intf_hdl *pintfhdl);
+
+void _rtw_attrib_read(struct adapter *adapter, u32 addr, u32 cnt, u8 *pmem);
+void _rtw_attrib_write(struct adapter *adapter, u32 addr, u32 cnt, u8 *pmem);
+
+u8 _rtw_read8(struct adapter *adapter, u32 addr);
+u16 _rtw_read16(struct adapter *adapter, u32 addr);
+u32 _rtw_read32(struct adapter *adapter, u32 addr);
+void _rtw_read_mem(struct adapter *adapter, u32 addr, u32 cnt, u8 *pmem);
+void _rtw_read_port(struct adapter *adapter, u32 addr, u32 cnt, u8 *pmem);
+void _rtw_read_port_cancel(struct adapter *adapter);
+
+int _rtw_write8(struct adapter *adapter, u32 addr, u8 val);
+int _rtw_write16(struct adapter *adapter, u32 addr, u16 val);
+int _rtw_write32(struct adapter *adapter, u32 addr, u32 val);
+int _rtw_writeN(struct adapter *adapter, u32 addr, u32 length, u8 *pdata);
+
+int _rtw_write8_async(struct adapter *adapter, u32 addr, u8 val);
+int _rtw_write16_async(struct adapter *adapter, u32 addr, u16 val);
+int _rtw_write32_async(struct adapter *adapter, u32 addr, u32 val);
+
+void _rtw_write_mem(struct adapter *adapter, u32 addr, u32 cnt, u8 *pmem);
+u32 _rtw_write_port(struct adapter *adapter, u32 addr, u32 cnt, u8 *pmem);
+u32 _rtw_write_port_and_wait(struct adapter *adapter, u32 addr, u32 cnt,
+ u8 *pmem, int timeout_ms);
+void _rtw_write_port_cancel(struct adapter *adapter);
+
+#define rtw_read8(adapter, addr) _rtw_read8((adapter), (addr))
+#define rtw_read16(adapter, addr) _rtw_read16((adapter), (addr))
+#define rtw_read32(adapter, addr) _rtw_read32((adapter), (addr))
+#define rtw_read_mem(adapter, addr, cnt, mem) \
+ _rtw_read_mem((adapter), (addr), (cnt), (mem))
+#define rtw_read_port(adapter, addr, cnt, mem) \
+ _rtw_read_port((adapter), (addr), (cnt), (mem))
+#define rtw_read_port_cancel(adapter) _rtw_read_port_cancel((adapter))
+
+#define rtw_write8(adapter, addr, val) \
+ _rtw_write8((adapter), (addr), (val))
+#define rtw_write16(adapter, addr, val) \
+ _rtw_write16((adapter), (addr), (val))
+#define rtw_write32(adapter, addr, val) \
+ _rtw_write32((adapter), (addr), (val))
+#define rtw_writeN(adapter, addr, length, data) \
+ _rtw_writeN((adapter), (addr), (length), (data))
+#define rtw_write8_async(adapter, addr, val) \
+ _rtw_write8_async((adapter), (addr), (val))
+#define rtw_write16_async(adapter, addr, val) \
+ _rtw_write16_async((adapter), (addr), (val))
+#define rtw_write32_async(adapter, addr, val) \
+ _rtw_write32_async((adapter), (addr), (val))
+#define rtw_write_mem(adapter, addr, cnt, mem) \
+ _rtw_write_mem((adapter), (addr), (cnt), (mem))
+#define rtw_write_port(adapter, addr, cnt, mem) \
+ _rtw_write_port((adapter), (addr), (cnt), (mem))
+#define rtw_write_port_and_wait(adapter, addr, cnt, mem, timeout_ms) \
+ _rtw_write_port_and_wait((adapter), (addr), (cnt), (mem), (timeout_ms))
+#define rtw_write_port_cancel(adapter) _rtw_write_port_cancel((adapter))
+
+void rtw_write_scsi(struct adapter *adapter, u32 cnt, u8 *pmem);
+
+/* ioreq */
+void ioreq_read8(struct adapter *adapter, u32 addr, u8 *pval);
+void ioreq_read16(struct adapter *adapter, u32 addr, u16 *pval);
+void ioreq_read32(struct adapter *adapter, u32 addr, u32 *pval);
+void ioreq_write8(struct adapter *adapter, u32 addr, u8 val);
+void ioreq_write16(struct adapter *adapter, u32 addr, u16 val);
+void ioreq_write32(struct adapter *adapter, u32 addr, u32 val);
+
+uint async_read8(struct adapter *adapter, u32 addr, u8 *pbuff,
+ void (*_async_io_callback)(struct adapter *padater,
+ struct io_req *pio_req,
+ u8 *cnxt), u8 *cnxt);
+uint async_read16(struct adapter *adapter, u32 addr, u8 *pbuff,
+ void (*_async_io_callback)(struct adapter *padater,
+ struct io_req *pio_req,
+ u8 *cnxt), u8 *cnxt);
+uint async_read32(struct adapter *adapter, u32 addr, u8 *pbuff,
+ void (*_async_io_callback)(struct adapter *padater,
+ struct io_req *pio_req,
+ u8 *cnxt), u8 *cnxt);
+
+void async_read_mem(struct adapter *adapter, u32 addr, u32 cnt, u8 *pmem);
+void async_read_port(struct adapter *adapter, u32 addr, u32 cnt, u8 *pmem);
+
+void async_write8(struct adapter *adapter, u32 addr, u8 val,
+ void (*_async_io_callback)(struct adapter *padater,
+ struct io_req *pio_req,
+ u8 *cnxt), u8 *cnxt);
+void async_write16(struct adapter *adapter, u32 addr, u16 val,
+ void (*_async_io_callback)(struct adapter *padater,
+ struct io_req *pio_req,
+ u8 *cnxt), u8 *cnxt);
+void async_write32(struct adapter *adapter, u32 addr, u32 val,
+ void (*_async_io_callback)(struct adapter *padater,
+ struct io_req *pio_req,
+ u8 *cnxt), u8 *cnxt);
+
+void async_write_mem(struct adapter *adapter, u32 addr, u32 cnt, u8 *pmem);
+void async_write_port(struct adapter *adapter, u32 addr, u32 cnt, u8 *pmem);
+
+int rtw_init_io_priv(struct adapter *padapter,
+ void (*set_intf_ops)(struct _io_ops *pops));
+
+uint alloc_io_queue(struct adapter *adapter);
+void free_io_queue(struct adapter *adapter);
+void async_bus_io(struct io_queue *pio_q);
+void bus_sync_io(struct io_queue *pio_q);
+u32 _ioreq2rwmem(struct io_queue *pio_q);
+void dev_power_down(struct adapter * Adapter, u8 bpwrup);
+
+#define PlatformEFIOWrite1Byte(_a,_b,_c) \
+ rtw_write8(_a,_b,_c)
+#define PlatformEFIOWrite2Byte(_a,_b,_c) \
+ rtw_write16(_a,_b,_c)
+#define PlatformEFIOWrite4Byte(_a,_b,_c) \
+ rtw_write32(_a,_b,_c)
+
+#define PlatformEFIORead1Byte(_a,_b) \
+ rtw_read8(_a,_b)
+#define PlatformEFIORead2Byte(_a,_b) \
+ rtw_read16(_a,_b)
+#define PlatformEFIORead4Byte(_a,_b) \
+ rtw_read32(_a,_b)
+
+#endif /* _RTL8711_IO_H_ */
diff --git a/drivers/staging/r8188eu/include/rtw_ioctl.h b/drivers/staging/r8188eu/include/rtw_ioctl.h
new file mode 100644
index 000000000000..8ffa73239819
--- /dev/null
+++ b/drivers/staging/r8188eu/include/rtw_ioctl.h
@@ -0,0 +1,120 @@
+/******************************************************************************
+ *
+ * Copyright(c) 2007 - 2011 Realtek Corporation. All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of version 2 of the GNU General Public License as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
+ * more details.
+ *
+ * You should have received a copy of the GNU General Public License along with
+ * this program; if not, write to the Free Software Foundation, Inc.,
+ * 51 Franklin Street, Fifth Floor, Boston, MA 02110, USA
+ *
+ *
+ ******************************************************************************/
+#ifndef _RTW_IOCTL_H_
+#define _RTW_IOCTL_H_
+
+#include <osdep_service.h>
+#include <drv_types.h>
+
+#ifndef OID_802_11_CAPABILITY
+ #define OID_802_11_CAPABILITY 0x0d010122
+#endif
+
+#ifndef OID_802_11_PMKID
+ #define OID_802_11_PMKID 0x0d010123
+#endif
+
+/* For DDK-defined OIDs */
+#define OID_NDIS_SEG1 0x00010100
+#define OID_NDIS_SEG2 0x00010200
+#define OID_NDIS_SEG3 0x00020100
+#define OID_NDIS_SEG4 0x01010100
+#define OID_NDIS_SEG5 0x01020100
+#define OID_NDIS_SEG6 0x01020200
+#define OID_NDIS_SEG7 0xFD010100
+#define OID_NDIS_SEG8 0x0D010100
+#define OID_NDIS_SEG9 0x0D010200
+#define OID_NDIS_SEG10 0x0D020200
+
+#define SZ_OID_NDIS_SEG1 23
+#define SZ_OID_NDIS_SEG2 3
+#define SZ_OID_NDIS_SEG3 6
+#define SZ_OID_NDIS_SEG4 6
+#define SZ_OID_NDIS_SEG5 4
+#define SZ_OID_NDIS_SEG6 8
+#define SZ_OID_NDIS_SEG7 7
+#define SZ_OID_NDIS_SEG8 36
+#define SZ_OID_NDIS_SEG9 24
+#define SZ_OID_NDIS_SEG10 19
+
+/* For Realtek-defined OIDs */
+#define OID_MP_SEG1 0xFF871100
+#define OID_MP_SEG2 0xFF818000
+
+#define OID_MP_SEG3 0xFF818700
+#define OID_MP_SEG4 0xFF011100
+
+#define DEBUG_OID(dbg, str) \
+ if ((!dbg)) { \
+ RT_TRACE(_module_rtl871x_ioctl_c_, _drv_info_, \
+ ("%s(%d): %s", __func__, __line__, str)); \
+ }
+
+enum oid_type {
+ QUERY_OID,
+ SET_OID
+};
+
+struct oid_funs_node {
+ unsigned int oid_start; /* the starting number for OID */
+ unsigned int oid_end; /* the ending number for OID */
+ struct oid_obj_priv *node_array;
+ unsigned int array_sz; /* the size of node_array */
+ int query_counter; /* count the number of query hits for this segment */
+ int set_counter; /* count the number of set hits for this segment */
+};
+
+struct oid_par_priv {
+ void *adapter_context;
+ NDIS_OID oid;
+ void *information_buf;
+ u32 information_buf_len;
+ u32 *bytes_rw;
+ u32 *bytes_needed;
+ enum oid_type type_of_oid;
+ u32 dbg;
+};
+
+struct oid_obj_priv {
+ unsigned char dbg; /* 0: without OID debug message
+ * 1: with OID debug message */
+ int (*oidfuns)(struct oid_par_priv *poid_par_priv);
+};
+
+#if defined(_RTW_MP_IOCTL_C_)
+static int oid_null_function(struct oid_par_priv *poid_par_priv) {
+ return NDIS_STATUS_SUCCESS;
+}
+#endif
+
+extern struct iw_handler_def rtw_handlers_def;
+
+int drv_query_info(struct net_device *miniportadaptercontext, NDIS_OID oid,
+ void *informationbuffer, u32 informationbufferlength,
+ u32 *byteswritten, u32 *bytesneeded);
+
+int drv_set_info(struct net_device *MiniportAdapterContext,
+ NDIS_OID oid, void *informationbuffer,
+ u32 informationbufferlength, u32 *bytesread,
+ u32 *bytesneeded);
+
+extern int ui_pid[3];
+
+#endif /* #ifndef __INC_CEINFO_ */
diff --git a/drivers/staging/r8188eu/include/rtw_ioctl_rtl.h b/drivers/staging/r8188eu/include/rtw_ioctl_rtl.h
new file mode 100644
index 000000000000..8fa3858cb776
--- /dev/null
+++ b/drivers/staging/r8188eu/include/rtw_ioctl_rtl.h
@@ -0,0 +1,79 @@
+/******************************************************************************
+ *
+ * Copyright(c) 2007 - 2011 Realtek Corporation. All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of version 2 of the GNU General Public License as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
+ * more details.
+ *
+ * You should have received a copy of the GNU General Public License along with
+ * this program; if not, write to the Free Software Foundation, Inc.,
+ * 51 Franklin Street, Fifth Floor, Boston, MA 02110, USA
+ *
+ *
+ ******************************************************************************/
+#ifndef _RTW_IOCTL_RTL_H_
+#define _RTW_IOCTL_RTL_H_
+
+#include <osdep_service.h>
+#include <drv_types.h>
+
+/* oid_rtl_seg_01_01 ************** */
+int oid_rt_get_signal_quality_hdl(struct oid_par_priv *poid_par_priv);/* 84 */
+int oid_rt_get_small_packet_crc_hdl(struct oid_par_priv *poid_par_priv);
+int oid_rt_get_middle_packet_crc_hdl(struct oid_par_priv *poid_par_priv);
+int oid_rt_get_large_packet_crc_hdl(struct oid_par_priv *poid_par_priv);
+int oid_rt_get_tx_retry_hdl(struct oid_par_priv *poid_par_priv);
+int oid_rt_get_rx_retry_hdl(struct oid_par_priv *poid_par_priv);
+int oid_rt_get_rx_total_packet_hdl(struct oid_par_priv *poid_par_priv);
+int oid_rt_get_tx_beacon_ok_hdl(struct oid_par_priv *poid_par_priv);
+int oid_rt_get_tx_beacon_err_hdl(struct oid_par_priv *poid_par_priv);
+
+int oid_rt_pro_set_fw_dig_state_hdl(struct oid_par_priv *poid_par_priv);/* 8a */
+int oid_rt_pro_set_fw_ra_state_hdl(struct oid_par_priv *poid_par_priv); /* 8b */
+
+int oid_rt_get_rx_icv_err_hdl(struct oid_par_priv *poid_par_priv);/* 93 */
+int oid_rt_set_encryption_algorithm_hdl(struct oid_par_priv *poid_par_priv);
+int oid_rt_get_preamble_mode_hdl(struct oid_par_priv *poid_par_priv);
+int oid_rt_get_ap_ip_hdl(struct oid_par_priv *poid_par_priv);
+int oid_rt_get_channelplan_hdl(struct oid_par_priv *poid_par_priv);
+int oid_rt_set_channelplan_hdl(struct oid_par_priv *poid_par_priv);
+int oid_rt_set_preamble_mode_hdl(struct oid_par_priv *poid_par_priv);
+int oid_rt_set_bcn_intvl_hdl(struct oid_par_priv *poid_par_priv);
+int oid_rt_dedicate_probe_hdl(struct oid_par_priv *poid_par_priv);
+int oid_rt_get_total_tx_bytes_hdl(struct oid_par_priv *poid_par_priv);
+int oid_rt_get_total_rx_bytes_hdl(struct oid_par_priv *poid_par_priv);
+int oid_rt_current_tx_power_level_hdl(struct oid_par_priv *poid_par_priv);
+int oid_rt_get_enc_key_mismatch_count_hdl(struct oid_par_priv *poid_par_priv);
+int oid_rt_get_enc_key_match_count_hdl(struct oid_par_priv *poid_par_priv);
+int oid_rt_get_channel_hdl(struct oid_par_priv *poid_par_priv);
+int oid_rt_get_hardware_radio_off_hdl(struct oid_par_priv *poid_par_priv);
+int oid_rt_get_key_mismatch_hdl(struct oid_par_priv *poid_par_priv);
+int oid_rt_supported_wireless_mode_hdl(struct oid_par_priv *poid_par_priv);
+int oid_rt_get_channel_list_hdl(struct oid_par_priv *poid_par_priv);
+int oid_rt_get_scan_in_progress_hdl(struct oid_par_priv *poid_par_priv);
+int oid_rt_forced_data_rate_hdl(struct oid_par_priv *poid_par_priv);
+int oid_rt_wireless_mode_for_scan_list_hdl(struct oid_par_priv *poid_par_priv);
+int oid_rt_get_bss_wireless_mode_hdl(struct oid_par_priv *poid_par_priv);
+int oid_rt_scan_with_magic_packet_hdl(struct oid_par_priv *poid_par_priv);
+
+/* oid_rtl_seg_01_03 section start ************** */
+int oid_rt_ap_get_associated_station_list_hdl(struct oid_par_priv *priv);
+int oid_rt_ap_switch_into_ap_mode_hdl(struct oid_par_priv *poid_par_priv);
+int oid_rt_ap_supported_hdl(struct oid_par_priv *poid_par_priv);
+int oid_rt_ap_set_passphrase_hdl(struct oid_par_priv *poid_par_priv);
+
+/* oid_rtl_seg_01_11 */
+int oid_rt_pro_rf_write_registry_hdl(struct oid_par_priv *poid_par_priv);
+int oid_rt_pro_rf_read_registry_hdl(struct oid_par_priv *poid_par_priv);
+
+/* oid_rtl_seg_03_00 section start ************** */
+int oid_rt_get_connect_state_hdl(struct oid_par_priv *poid_par_priv);
+int oid_rt_set_default_key_id_hdl(struct oid_par_priv *poid_par_priv);
+
+#endif
diff --git a/drivers/staging/r8188eu/include/rtw_ioctl_set.h b/drivers/staging/r8188eu/include/rtw_ioctl_set.h
new file mode 100644
index 000000000000..794f98167c3c
--- /dev/null
+++ b/drivers/staging/r8188eu/include/rtw_ioctl_set.h
@@ -0,0 +1,49 @@
+/******************************************************************************
+ *
+ * Copyright(c) 2007 - 2011 Realtek Corporation. All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of version 2 of the GNU General Public License as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
+ * more details.
+ *
+ * You should have received a copy of the GNU General Public License along with
+ * this program; if not, write to the Free Software Foundation, Inc.,
+ * 51 Franklin Street, Fifth Floor, Boston, MA 02110, USA
+ *
+ *
+ ******************************************************************************/
+#ifndef __RTW_IOCTL_SET_H_
+#define __RTW_IOCTL_SET_H_
+
+#include <drv_types.h>
+
+typedef u8 NDIS_802_11_PMKID_VALUE[16];
+
+u8 rtw_set_802_11_add_key(struct adapter *adapt, struct ndis_802_11_key *key);
+u8 rtw_set_802_11_authentication_mode(struct adapter *adapt,
+ enum ndis_802_11_auth_mode authmode);
+u8 rtw_set_802_11_bssid(struct adapter*adapter, u8 *bssid);
+u8 rtw_set_802_11_add_wep(struct adapter *adapter, struct ndis_802_11_wep *wep);
+u8 rtw_set_802_11_disassociate(struct adapter *adapter);
+u8 rtw_set_802_11_bssid_list_scan(struct adapter*adapter,
+ struct ndis_802_11_ssid *pssid,
+ int ssid_max_num);
+u8 rtw_set_802_11_infrastructure_mode(struct adapter *adapter,
+ enum ndis_802_11_network_infra type);
+u8 rtw_set_802_11_remove_wep(struct adapter *adapter, u32 keyindex);
+u8 rtw_set_802_11_ssid(struct adapter *adapt, struct ndis_802_11_ssid *ssid);
+u8 rtw_set_802_11_remove_key(struct adapter *adapt,
+ struct ndis_802_11_remove_key *key);
+u8 rtw_validate_ssid(struct ndis_802_11_ssid *ssid);
+u16 rtw_get_cur_max_rate(struct adapter *adapter);
+int rtw_set_scan_mode(struct adapter *adapter, enum rt_scan_type scan_mode);
+int rtw_set_channel_plan(struct adapter *adapter, u8 channel_plan);
+int rtw_set_country(struct adapter *adapter, const char *country_code);
+int rtw_change_ifname(struct adapter *padapter, const char *ifname);
+
+#endif
diff --git a/drivers/staging/r8188eu/include/rtw_iol.h b/drivers/staging/r8188eu/include/rtw_iol.h
new file mode 100644
index 000000000000..6949922baa65
--- /dev/null
+++ b/drivers/staging/r8188eu/include/rtw_iol.h
@@ -0,0 +1,84 @@
+/******************************************************************************
+ *
+ * Copyright(c) 2007 - 2011 Realtek Corporation. All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of version 2 of the GNU General Public License as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
+ * more details.
+ *
+ * You should have received a copy of the GNU General Public License along with
+ * this program; if not, write to the Free Software Foundation, Inc.,
+ * 51 Franklin Street, Fifth Floor, Boston, MA 02110, USA
+ *
+ *
+ ******************************************************************************/
+#ifndef __RTW_IOL_H_
+#define __RTW_IOL_H_
+
+#include <osdep_service.h>
+#include <drv_types.h>
+
+#define IOREG_CMD_END_LEN 4
+
+struct ioreg_cfg {
+ u8 length;
+ u8 cmd_id;
+ __le16 address;
+ __le32 data;
+ __le32 mask;
+};
+
+enum ioreg_cmd {
+ IOREG_CMD_LLT = 0x01,
+ IOREG_CMD_REFUSE = 0x02,
+ IOREG_CMD_EFUSE_PATH = 0x03,
+ IOREG_CMD_WB_REG = 0x04,
+ IOREG_CMD_WW_REG = 0x05,
+ IOREG_CMD_WD_REG = 0x06,
+ IOREG_CMD_W_RF = 0x07,
+ IOREG_CMD_DELAY_US = 0x10,
+ IOREG_CMD_DELAY_MS = 0x11,
+ IOREG_CMD_END = 0xFF,
+};
+
+struct xmit_frame *rtw_IOL_accquire_xmit_frame(struct adapter *adapter);
+int rtw_IOL_append_cmds(struct xmit_frame *xmit_frame, u8 *IOL_cmds,
+ u32 cmd_len);
+int rtw_IOL_append_LLT_cmd(struct xmit_frame *xmit_frame, u8 page_boundary);
+int rtw_IOL_exec_cmds_sync(struct adapter *adapter,
+ struct xmit_frame *xmit_frame, u32 max_wating_ms,
+ u32 bndy_cnt);
+bool rtw_IOL_applied(struct adapter *adapter);
+int rtw_IOL_append_DELAY_US_cmd(struct xmit_frame *xmit_frame, u16 us);
+int rtw_IOL_append_DELAY_MS_cmd(struct xmit_frame *xmit_frame, u16 ms);
+int rtw_IOL_append_END_cmd(struct xmit_frame *xmit_frame);
+
+void read_efuse_from_txpktbuf(struct adapter *adapter, int bcnhead,
+ u8 *content, u16 *size);
+
+int _rtw_IOL_append_WB_cmd(struct xmit_frame *xmit_frame, u16 addr,
+ u8 value, u8 mask);
+int _rtw_IOL_append_WW_cmd(struct xmit_frame *xmit_frame, u16 addr,
+ u16 value, u16 mask);
+int _rtw_IOL_append_WD_cmd(struct xmit_frame *xmit_frame, u16 addr,
+ u32 value, u32 mask);
+int _rtw_IOL_append_WRF_cmd(struct xmit_frame *xmit_frame, u8 rf_path,
+ u16 addr, u32 value, u32 mask);
+#define rtw_IOL_append_WB_cmd(xmit_frame, addr, value, mask) \
+ _rtw_IOL_append_WB_cmd((xmit_frame), (addr), (value) ,(mask))
+#define rtw_IOL_append_WW_cmd(xmit_frame, addr, value, mask) \
+ _rtw_IOL_append_WW_cmd((xmit_frame), (addr), (value),(mask))
+#define rtw_IOL_append_WD_cmd(xmit_frame, addr, value, mask) \
+ _rtw_IOL_append_WD_cmd((xmit_frame), (addr), (value), (mask))
+#define rtw_IOL_append_WRF_cmd(xmit_frame, rf_path, addr, value, mask) \
+ _rtw_IOL_append_WRF_cmd((xmit_frame),(rf_path), (addr), (value), (mask))
+
+u8 rtw_IOL_cmd_boundary_handle(struct xmit_frame *pxmit_frame);
+void rtw_IOL_cmd_buf_dump(struct adapter *Adapter,int buf_len,u8 *pbuf);
+
+#endif /* __RTW_IOL_H_ */
diff --git a/drivers/staging/r8188eu/include/rtw_led.h b/drivers/staging/r8188eu/include/rtw_led.h
new file mode 100644
index 000000000000..1e6a8090a753
--- /dev/null
+++ b/drivers/staging/r8188eu/include/rtw_led.h
@@ -0,0 +1,201 @@
+/******************************************************************************
+ *
+ * Copyright(c) 2007 - 2011 Realtek Corporation. All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of version 2 of the GNU General Public License as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
+ * more details.
+ *
+ * You should have received a copy of the GNU General Public License along with
+ * this program; if not, write to the Free Software Foundation, Inc.,
+ * 51 Franklin Street, Fifth Floor, Boston, MA 02110, USA
+ *
+ *
+ ******************************************************************************/
+#ifndef __RTW_LED_H_
+#define __RTW_LED_H_
+
+#include <osdep_service.h>
+#include <drv_types.h>
+
+#define MSECS(t) (HZ * ((t) / 1000) + (HZ * ((t) % 1000)) / 1000)
+
+#define LED_BLINK_NORMAL_INTERVAL 100
+#define LED_BLINK_SLOWLY_INTERVAL 200
+#define LED_BLINK_LONG_INTERVAL 400
+
+#define LED_BLINK_NO_LINK_INTERVAL_ALPHA 1000
+#define LED_BLINK_LINK_INTERVAL_ALPHA 500 /* 500 */
+#define LED_BLINK_SCAN_INTERVAL_ALPHA 180 /* 150 */
+#define LED_BLINK_FASTER_INTERVAL_ALPHA 50
+#define LED_BLINK_WPS_SUCESS_INTERVAL_ALPHA 5000
+
+#define LED_BLINK_NORMAL_INTERVAL_NETTRONIX 100
+#define LED_BLINK_SLOWLY_INTERVAL_NETTRONIX 2000
+
+#define LED_BLINK_SLOWLY_INTERVAL_PORNET 1000
+#define LED_BLINK_NORMAL_INTERVAL_PORNET 100
+
+#define LED_BLINK_FAST_INTERVAL_BITLAND 30
+
+/* 060403, rcnjko: Customized for AzWave. */
+#define LED_CM2_BLINK_ON_INTERVAL 250
+#define LED_CM2_BLINK_OFF_INTERVAL 4750
+
+#define LED_CM8_BLINK_INTERVAL 500 /* for QMI */
+#define LED_CM8_BLINK_OFF_INTERVAL 3750 /* for QMI */
+
+/* 080124, lanhsin: Customized for RunTop */
+#define LED_RunTop_BLINK_INTERVAL 300
+
+/* 060421, rcnjko: Customized for Sercomm Printer Server case. */
+#define LED_CM3_BLINK_INTERVAL 1500
+
+enum LED_CTL_MODE {
+ LED_CTL_POWER_ON = 1,
+ LED_CTL_LINK = 2,
+ LED_CTL_NO_LINK = 3,
+ LED_CTL_TX = 4,
+ LED_CTL_RX = 5,
+ LED_CTL_SITE_SURVEY = 6,
+ LED_CTL_POWER_OFF = 7,
+ LED_CTL_START_TO_LINK = 8,
+ LED_CTL_START_WPS = 9,
+ LED_CTL_STOP_WPS = 10,
+ LED_CTL_START_WPS_BOTTON = 11, /* added for runtop */
+ LED_CTL_STOP_WPS_FAIL = 12, /* added for ALPHA */
+ LED_CTL_STOP_WPS_FAIL_OVERLAP = 13, /* added for BELKIN */
+ LED_CTL_CONNECTION_NO_TRANSFER = 14,
+};
+
+enum LED_STATE_871x {
+ LED_UNKNOWN = 0,
+ RTW_LED_ON = 1,
+ RTW_LED_OFF = 2,
+ LED_BLINK_NORMAL = 3,
+ LED_BLINK_SLOWLY = 4,
+ LED_BLINK_POWER_ON = 5,
+ LED_BLINK_SCAN = 6, /* LED is blinking during scanning period,
+ * the # of times to blink is depend on time
+ * for scanning. */
+ LED_BLINK_NO_LINK = 7, /* LED is blinking during no link state. */
+ LED_BLINK_StartToBlink = 8,/* Customzied for Sercomm Printer
+ * Server case */
+ LED_BLINK_TXRX = 9,
+ LED_BLINK_WPS = 10, /* LED is blinkg during WPS communication */
+ LED_BLINK_WPS_STOP = 11, /* for ALPHA */
+ LED_BLINK_WPS_STOP_OVERLAP = 12, /* for BELKIN */
+ LED_BLINK_RUNTOP = 13, /* Customized for RunTop */
+ LED_BLINK_CAMEO = 14,
+ LED_BLINK_XAVI = 15,
+ LED_BLINK_ALWAYS_ON = 16,
+};
+
+enum LED_PIN_871x {
+ LED_PIN_NULL = 0,
+ LED_PIN_LED0 = 1,
+ LED_PIN_LED1 = 2,
+ LED_PIN_LED2 = 3,
+ LED_PIN_GPIO0 = 4,
+};
+
+struct LED_871x {
+ struct adapter *padapter;
+
+ enum LED_PIN_871x LedPin; /* Identify how to implement this
+ * SW led. */
+ enum LED_STATE_871x CurrLedState; /* Current LED state. */
+ enum LED_STATE_871x BlinkingLedState; /* Next state for blinking,
+ * either RTW_LED_ON or RTW_LED_OFF are. */
+
+ u8 bLedOn; /* true if LED is ON, false if LED is OFF. */
+
+ u8 bLedBlinkInProgress; /* true if it is blinking, false o.w.. */
+
+ u8 bLedWPSBlinkInProgress;
+
+ u32 BlinkTimes; /* Number of times to toggle led state for blinking. */
+
+ struct timer_list BlinkTimer; /* Timer object for led blinking. */
+
+ u8 bSWLedCtrl;
+
+ /* ALPHA, added by chiyoko, 20090106 */
+ u8 bLedNoLinkBlinkInProgress;
+ u8 bLedLinkBlinkInProgress;
+ u8 bLedStartToLinkBlinkInProgress;
+ u8 bLedScanBlinkInProgress;
+ struct work_struct BlinkWorkItem; /* Workitem used by BlinkTimer to
+ * manipulate H/W to blink LED. */
+};
+
+#define IS_LED_WPS_BLINKING(_LED_871x) \
+ (((struct LED_871x *)_LED_871x)->CurrLedState == LED_BLINK_WPS || \
+ ((struct LED_871x *)_LED_871x)->CurrLedState == LED_BLINK_WPS_STOP || \
+ ((struct LED_871x *)_LED_871x)->bLedWPSBlinkInProgress)
+
+#define IS_LED_BLINKING(_LED_871x) \
+ (((struct LED_871x *)_LED_871x)->bLedWPSBlinkInProgress || \
+ ((struct LED_871x *)_LED_871x)->bLedScanBlinkInProgress)
+
+/* LED customization. */
+
+enum LED_STRATEGY_871x {
+ SW_LED_MODE0 = 0, /* SW control 1 LED via GPIO0. It is default option.*/
+ SW_LED_MODE1= 1, /* 2 LEDs, through LED0 and LED1. For ALPHA. */
+ SW_LED_MODE2 = 2, /* SW control 1 LED via GPIO0, customized for AzWave
+ * 8187 minicard. */
+ SW_LED_MODE3 = 3, /* SW control 1 LED via GPIO0, customized for Sercomm
+ * Printer Server case. */
+ SW_LED_MODE4 = 4, /* for Edimax / Belkin */
+ SW_LED_MODE5 = 5, /* for Sercomm / Belkin */
+ SW_LED_MODE6 = 6, /* for 88CU minicard, porting from ce SW_LED_MODE7 */
+ HW_LED = 50, /* HW control 2 LEDs, LED0 and LED1 (there are 4
+ * different control modes, see MAC.CONFIG1 for details.)*/
+ LED_ST_NONE = 99,
+};
+
+void LedControl8188eu(struct adapter *padapter, enum LED_CTL_MODE LedAction);
+
+struct led_priv{
+ /* add for led control */
+ struct LED_871x SwLed0;
+ struct LED_871x SwLed1;
+ enum LED_STRATEGY_871x LedStrategy;
+ u8 bRegUseLed;
+ void (*LedControlHandler)(struct adapter *padapter,
+ enum LED_CTL_MODE LedAction);
+ /* add for led control */
+};
+
+#define rtw_led_control(adapt, action) \
+ do { \
+ if ((adapt)->ledpriv.LedControlHandler) \
+ (adapt)->ledpriv.LedControlHandler((adapt), (action)); \
+ } while (0)
+
+#if LINUX_VERSION_CODE >= KERNEL_VERSION(4, 15, 0)
+void BlinkTimerCallback(struct timer_list *t);
+#else
+void BlinkTimerCallback(void *data);
+#endif
+void BlinkWorkItemCallback(struct work_struct *work);
+
+void ResetLedStatus(struct LED_871x * pLed);
+
+void InitLed871x(struct adapter *padapter, struct LED_871x *pLed,
+ enum LED_PIN_871x LedPin);
+
+void DeInitLed871x(struct LED_871x *pLed);
+
+/* hal... */
+void BlinkHandler(struct LED_871x * pLed);
+void SwLedOn(struct adapter *padapter, struct LED_871x *pLed);
+void SwLedOff(struct adapter *padapter, struct LED_871x *pLed);
+
+#endif /* __RTW_LED_H_ */
diff --git a/drivers/staging/r8188eu/include/rtw_mlme.h b/drivers/staging/r8188eu/include/rtw_mlme.h
new file mode 100644
index 000000000000..a53a567b2960
--- /dev/null
+++ b/drivers/staging/r8188eu/include/rtw_mlme.h
@@ -0,0 +1,649 @@
+/******************************************************************************
+ *
+ * Copyright(c) 2007 - 2011 Realtek Corporation. All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of version 2 of the GNU General Public License as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
+ * more details.
+ *
+ * You should have received a copy of the GNU General Public License along with
+ * this program; if not, write to the Free Software Foundation, Inc.,
+ * 51 Franklin Street, Fifth Floor, Boston, MA 02110, USA
+ *
+ *
+ ******************************************************************************/
+#ifndef __RTW_MLME_H_
+#define __RTW_MLME_H_
+
+#include <osdep_service.h>
+#include <mlme_osdep.h>
+#include <drv_types.h>
+#include <wlan_bssdef.h>
+
+#define MAX_BSS_CNT 128
+#define MAX_JOIN_TIMEOUT 6500
+
+/* Increase the scanning timeout because of increasing the SURVEY_TO value. */
+
+#define SCANNING_TIMEOUT 8000
+
+#define SCAN_INTERVAL (30) /* unit:2sec, 30*2=60sec */
+
+#define SCANQUEUE_LIFETIME 20 /* unit:sec */
+
+#define WIFI_NULL_STATE 0x00000000
+
+#define WIFI_ASOC_STATE 0x00000001 /* Under Linked state */
+#define WIFI_REASOC_STATE 0x00000002
+#define WIFI_SLEEP_STATE 0x00000004
+#define WIFI_STATION_STATE 0x00000008
+
+#define WIFI_AP_STATE 0x00000010
+#define WIFI_ADHOC_STATE 0x00000020
+#define WIFI_ADHOC_MASTER_STATE 0x00000040
+#define WIFI_UNDER_LINKING 0x00000080
+
+#define WIFI_UNDER_WPS 0x00000100
+#define WIFI_STA_ALIVE_CHK_STATE 0x00000400
+#define WIFI_SITE_MONITOR 0x00000800 /* to indicate the station is under site surveying */
+
+#define WIFI_MP_STATE 0x00010000
+#define WIFI_MP_CTX_BACKGROUND 0x00020000 /* in continuous tx background */
+#define WIFI_MP_CTX_ST 0x00040000 /* in continuous tx with single-tone */
+#define WIFI_MP_CTX_BACKGROUND_PENDING 0x00080000 /* pending in continuous tx background due to out of skb */
+#define WIFI_MP_CTX_CCK_HW 0x00100000 /* in continuous tx */
+#define WIFI_MP_CTX_CCK_CS 0x00200000 /* in continuous tx with carrier suppression */
+#define WIFI_MP_LPBK_STATE 0x00400000
+
+#define _FW_UNDER_LINKING WIFI_UNDER_LINKING
+#define _FW_LINKED WIFI_ASOC_STATE
+#define _FW_UNDER_SURVEY WIFI_SITE_MONITOR
+
+enum dot11AuthAlgrthmNum {
+ dot11AuthAlgrthm_Open = 0,
+ dot11AuthAlgrthm_Shared,
+ dot11AuthAlgrthm_8021X,
+ dot11AuthAlgrthm_Auto,
+ dot11AuthAlgrthm_WAPI,
+ dot11AuthAlgrthm_MaxNum
+};
+
+/* Scan type including active and passive scan. */
+enum rt_scan_type {
+ SCAN_PASSIVE,
+ SCAN_ACTIVE,
+ SCAN_MIX,
+};
+
+enum SCAN_RESULT_TYPE {
+ SCAN_RESULT_P2P_ONLY = 0, /* Will return all the P2P devices. */
+ SCAN_RESULT_ALL = 1, /* Will return all the scanned device,
+ * include AP. */
+ SCAN_RESULT_WFD_TYPE = 2 /* Will just return the correct WFD
+ * device. */
+ /* If this device is Miracast sink
+ * device, it will just return all the
+ * Miracast source devices. */
+};
+
+/*
+there are several "locks" in mlme_priv,
+since mlme_priv is a shared resource between many threads,
+like ISR/Call-Back functions, the OID handlers, and even timer functions.
+
+Each _queue has its own locks, already.
+Other items are protected by mlme_priv.lock.
+
+To avoid possible dead lock, any thread trying to modifiying mlme_priv
+SHALL not lock up more than one lock at a time!
+*/
+
+#define traffic_threshold 10
+#define traffic_scan_period 500
+
+struct sitesurvey_ctrl {
+ u64 last_tx_pkts;
+ uint last_rx_pkts;
+ int traffic_busy;
+ struct timer_list sitesurvey_ctrl_timer;
+};
+
+struct rt_link_detect {
+ u32 NumTxOkInPeriod;
+ u32 NumRxOkInPeriod;
+ u32 NumRxUnicastOkInPeriod;
+ bool bBusyTraffic;
+ bool bTxBusyTraffic;
+ bool bRxBusyTraffic;
+ bool bHigherBusyTraffic; /* For interrupt migration purpose. */
+ bool bHigherBusyRxTraffic; /* We may disable Tx interrupt according
+ * to Rx traffic. */
+ bool bHigherBusyTxTraffic; /* We may disable Tx interrupt according
+ * to Tx traffic. */
+};
+
+struct profile_info {
+ u8 ssidlen;
+ u8 ssid[ WLAN_SSID_MAXLEN ];
+ u8 peermac[ ETH_ALEN ];
+};
+
+struct tx_invite_req_info {
+ u8 token;
+ u8 benable;
+ u8 go_ssid[ WLAN_SSID_MAXLEN ];
+ u8 ssidlen;
+ u8 go_bssid[ ETH_ALEN ];
+ u8 peer_macaddr[ ETH_ALEN ];
+ u8 operating_ch; /* This information will be set by using the
+ * p2p_set op_ch=x */
+ u8 peer_ch; /* The listen channel for peer P2P device */
+};
+
+struct tx_invite_resp_info {
+ u8 token; /* Used to record the dialog token of p2p invitation
+ * request frame. */
+};
+
+struct tx_provdisc_req_info {
+ u16 wps_config_method_request; /* Used when sending the
+ * provisioning request frame*/
+ u16 peer_channel_num[2]; /* The channel number which the
+ * receiver stands. */
+ struct ndis_802_11_ssid ssid;
+ u8 peerDevAddr[ETH_ALEN]; /* Peer device address */
+ u8 peerIFAddr[ETH_ALEN]; /* Peer interface address */
+ u8 benable; /* This provision discovery
+ * request frame is trigger
+ * to send or not */
+};
+
+/* When peer device issue prov_disc_req first, we should store the following
+ * information */
+/* The UI must know this information to know which config method the
+ * remote p2p device needs. */
+struct rx_provdisc_req_info {
+ u8 peerDevAddr[ETH_ALEN]; /* Peer device address */
+ u8 strconfig_method_desc_of_prov_disc_req[4]; /* description
+ * for the config method located in the provisioning
+ * discovery request frame. */
+};
+
+struct tx_nego_req_info {
+ u16 peer_channel_num[2]; /* The channel number. */
+ u8 peerDevAddr[ETH_ALEN]; /* Peer device address */
+ u8 benable; /* This negotiation request frame is
+ * trigger to send or not */
+};
+
+struct group_id_info {
+ u8 go_device_addr[ ETH_ALEN ]; /* The GO's device address of
+ * this P2P group */
+ u8 ssid[ WLAN_SSID_MAXLEN ]; /* The SSID of this P2P group */
+};
+
+struct scan_limit_info {
+ u8 scan_op_ch_only; /* When this flag is set, the driver
+ * should only scan the op. channel */
+ u8 operation_ch[2]; /* Store the op. chan of invitation */
+};
+
+struct wifidirect_info {
+ struct adapter *padapter;
+ struct timer_list find_phase_timer;
+ struct timer_list restore_p2p_state_timer;
+
+ /* Used to do the scanning. After confirming the peer is availalble,
+ * the driver transmits the P2P frame to peer. */
+ struct timer_list pre_tx_scan_timer;
+ struct timer_list reset_ch_sitesurvey;
+ struct timer_list reset_ch_sitesurvey2; /* Just for resetting the scan
+ * limit function by using p2p nego */
+ struct tx_provdisc_req_info tx_prov_disc_info;
+ struct rx_provdisc_req_info rx_prov_disc_info;
+ struct tx_invite_req_info invitereq_info;
+ /* Store the profile information of persistent group */
+ struct profile_info profileinfo[P2P_MAX_PERSISTENT_GROUP_NUM];
+ struct tx_invite_resp_info inviteresp_info;
+ struct tx_nego_req_info nego_req_info;
+ /* Store the group id info when doing the group negot handshake. */
+ struct group_id_info groupid_info;
+ /* Used for get the limit scan channel from the Invitation procedure */
+ struct scan_limit_info rx_invitereq_info;
+ /* Used for get the limit scan chan from the P2P negotiation handshake*/
+ struct scan_limit_info p2p_info;
+ enum P2P_ROLE role;
+ enum P2P_STATE pre_p2p_state;
+ enum P2P_STATE p2p_state;
+ /* The device address should be the mac address of this device. */
+ u8 device_addr[ETH_ALEN];
+ u8 interface_addr[ETH_ALEN];
+ u8 social_chan[4];
+ u8 listen_channel;
+ u8 operating_channel;
+ u8 listen_dwell; /* This value should be between 1 and 3 */
+ u8 support_rate[8];
+ u8 p2p_wildcard_ssid[P2P_WILDCARD_SSID_LEN];
+ u8 intent; /* should only include the intent value. */
+ u8 p2p_peer_interface_addr[ETH_ALEN];
+ u8 p2p_peer_device_addr[ETH_ALEN];
+ u8 peer_intent; /* Included the intent value and tie breaker value. */
+ /* Device name for displaying on searching device screen */
+ u8 device_name[WPS_MAX_DEVICE_NAME_LEN];
+ u8 device_name_len;
+ u8 profileindex; /* Used to point to the index of profileinfo array */
+ u8 peer_operating_ch;
+ u8 find_phase_state_exchange_cnt;
+ /* The device password ID for group negotiation */
+ u16 device_password_id_for_nego;
+ u8 negotiation_dialog_token;
+ /* SSID information for group negotitation */
+ u8 nego_ssid[WLAN_SSID_MAXLEN];
+ u8 nego_ssidlen;
+ u8 p2p_group_ssid[WLAN_SSID_MAXLEN];
+ u8 p2p_group_ssid_len;
+ /* Flag to know if the persistent function should be supported or not.*/
+ u8 persistent_supported;
+ /* In the Sigma test, the Sigma will provide this enable from the
+ * sta_set_p2p CAPI. */
+ /* 0: disable */
+ /* 1: enable */
+ u8 session_available; /* Flag to set the WFD session available to
+ * enable or disable "by Sigma" */
+ /* In the Sigma test, the Sigma will disable the session available
+ * by using the sta_preset CAPI. */
+ /* 0: disable */
+ /* 1: enable */
+ u8 wfd_tdls_enable; /* Flag to enable or disable the TDLS by WFD Sigma*/
+ /* 0: disable */
+ /* 1: enable */
+ u8 wfd_tdls_weaksec; /* Flag to enable or disable the weak security
+ * function for TDLS by WFD Sigma */
+ /* 0: disable */
+ /* In this case, the driver can't issue the tdsl
+ * setup request frame. */
+ /* 1: enable */
+ /* In this case, the driver can issue the tdls
+ * setup request frame */
+ /* even the current security is weak security. */
+
+ /* This field will store the WPS value (PIN value or PBC) that UI had
+ * got from the user. */
+ enum P2P_WPSINFO ui_got_wps_info;
+ u16 supported_wps_cm; /* This field describes the WPS config method
+ * which this driver supported. */
+ /* The value should be the combination of config
+ * method defined in page104 of WPS v2.0 spec.*/
+ /* This field will contain the length of body of P2P Channel List
+ * attribute of group negotiation response frame. */
+ uint channel_list_attr_len;
+ /* This field will contain the body of P2P Channel List attribute of
+ * group negotitation response frame. */
+ /* We will use the channel_cnt and channel_list fields when constructing
+ * the group negotiation confirm frame. */
+ u8 channel_list_attr[100];
+ enum P2P_PS_MODE p2p_ps_mode; /* indicate p2p ps mode */
+ enum P2P_PS_STATE p2p_ps_state; /* indicate p2p ps state */
+ u8 noa_index; /* Identifies and instance of Notice of Absence timing. */
+ u8 ctwindow; /* Client traffic window. A period of time in TU after TBTT. */
+ u8 opp_ps; /* opportunistic power save. */
+ u8 noa_num; /* number of NoA descriptor in P2P IE. */
+ u8 noa_count[P2P_MAX_NOA_NUM]; /* Count for owner, Type of client. */
+ /* Max duration for owner, preferred or min acceptable duration for
+ * client. */
+ u32 noa_duration[P2P_MAX_NOA_NUM];
+ /* Length of interval for owner, preferred or max acceptable interval
+ * of client. */
+ u32 noa_interval[P2P_MAX_NOA_NUM];
+ /* schedule expressed in terms of the lower 4 bytes of the TSF timer. */
+ u32 noa_start_time[P2P_MAX_NOA_NUM];
+};
+
+struct tdls_ss_record { /* signal strength record */
+ u8 macaddr[ETH_ALEN];
+ u8 RxPWDBAll;
+ u8 is_tdls_sta; /* true: direct link sta, false: else */
+};
+
+struct tdls_info {
+ u8 ap_prohibited;
+ uint setup_state;
+ u8 sta_cnt;
+ u8 sta_maximum; /* 1:tdls sta is equal (NUM_STA-1), reach max direct link number; 0: else; */
+ struct tdls_ss_record ss_record;
+ u8 macid_index; /* macid entry that is ready to write */
+ u8 clear_cam; /* cam entry that is trying to clear, using it in direct link teardown */
+ u8 ch_sensing;
+ u8 cur_channel;
+ u8 candidate_ch;
+ u8 collect_pkt_num[MAX_CHANNEL_NUM];
+ spinlock_t cmd_lock;
+ spinlock_t hdl_lock;
+ u8 watchdog_count;
+ u8 dev_discovered; /* WFD_TDLS: for sigma test */
+ u8 enable;
+};
+
+struct mlme_priv {
+ spinlock_t lock;
+ int fw_state; /* shall we protect this variable? maybe not necessarily... */
+ u8 bScanInProcess;
+ u8 to_join; /* flag */
+ u8 to_roaming; /* roaming trying times */
+
+ u8 *nic_hdl;
+
+ u8 not_indic_disco;
+ struct list_head *pscanned;
+ struct __queue free_bss_pool;
+ struct __queue scanned_queue;
+ u8 *free_bss_buf;
+ u8 key_mask; /* use to restore wep key after hal_init */
+ u32 num_of_scanned;
+
+ struct ndis_802_11_ssid assoc_ssid;
+ u8 assoc_bssid[6];
+
+ struct wlan_network cur_network;
+ struct wlan_network *cur_network_scanned;
+
+ u32 scan_interval;
+
+ struct timer_list assoc_timer;
+
+ uint assoc_by_bssid;
+ uint assoc_by_rssi;
+
+ struct timer_list scan_to_timer; /* driver itself handles scan_timeout status. */
+ u32 scan_start_time; /* used to evaluate the time spent in scanning */
+
+ struct qos_priv qospriv;
+
+ /* Number of non-HT AP/stations */
+ int num_sta_no_ht;
+
+ /* Number of HT AP/stations 20 MHz */
+ /* int num_sta_ht_20mhz; */
+
+ int num_FortyMHzIntolerant;
+ struct ht_priv htpriv;
+ struct rt_link_detect LinkDetectInfo;
+ struct timer_list dynamic_chk_timer; /* dynamic/periodic check timer */
+
+ u8 acm_mask; /* for wmm acm mask */
+ u8 ChannelPlan;
+ enum rt_scan_type scan_mode; /* active: 1, passive: 0 */
+
+ /* u8 probereq_wpsie[MAX_WPS_IE_LEN];added in probe req */
+ /* int probereq_wpsie_len; */
+ u8 *wps_probe_req_ie;
+ u32 wps_probe_req_ie_len;
+
+ u8 *assoc_req;
+ u32 assoc_req_len;
+ u8 *assoc_rsp;
+ u32 assoc_rsp_len;
+
+#if defined (CONFIG_88EU_AP_MODE)
+ /* Number of associated Non-ERP stations (i.e., stations using 802.11b
+ * in 802.11g BSS) */
+ int num_sta_non_erp;
+
+ /* Number of associated stations that do not support Short Slot Time */
+ int num_sta_no_short_slot_time;
+
+ /* Number of associated stations that do not support Short Preamble */
+ int num_sta_no_short_preamble;
+
+ int olbc; /* Overlapping Legacy BSS Condition */
+
+ /* Number of HT assoc sta that do not support greenfield */
+ int num_sta_ht_no_gf;
+
+ /* Number of associated non-HT stations */
+ /* int num_sta_no_ht; */
+
+ /* Number of HT associated stations 20 MHz */
+ int num_sta_ht_20mhz;
+
+ /* Overlapping BSS information */
+ int olbc_ht;
+
+ u16 ht_op_mode;
+
+ u8 *wps_beacon_ie;
+ /* u8 *wps_probe_req_ie; */
+ u8 *wps_probe_resp_ie;
+ u8 *wps_assoc_resp_ie;
+
+ u32 wps_beacon_ie_len;
+ u32 wps_probe_resp_ie_len;
+ u32 wps_assoc_resp_ie_len;
+
+ u8 *p2p_beacon_ie;
+ u8 *p2p_probe_req_ie;
+ u8 *p2p_probe_resp_ie;
+ u8 *p2p_go_probe_resp_ie; /* for GO */
+ u8 *p2p_assoc_req_ie;
+
+ u32 p2p_beacon_ie_len;
+ u32 p2p_probe_req_ie_len;
+ u32 p2p_probe_resp_ie_len;
+ u32 p2p_go_probe_resp_ie_len; /* for GO */
+ u32 p2p_assoc_req_ie_len;
+ spinlock_t bcn_update_lock;
+ u8 update_bcn;
+#endif /* if defined (CONFIG_88EU_AP_MODE) */
+};
+
+#ifdef CONFIG_88EU_AP_MODE
+
+struct hostapd_priv {
+ struct adapter *padapter;
+};
+
+int hostapd_mode_init(struct adapter *padapter);
+void hostapd_mode_unload(struct adapter *padapter);
+#endif
+
+extern unsigned char WPA_TKIP_CIPHER[4];
+extern unsigned char RSN_TKIP_CIPHER[4];
+extern unsigned char REALTEK_96B_IE[];
+extern unsigned char MCS_rate_2R[16];
+extern unsigned char MCS_rate_1R[16];
+
+void rtw_joinbss_event_prehandle(struct adapter *adapter, u8 *pbuf);
+void rtw_survey_event_callback(struct adapter *adapter, u8 *pbuf);
+void rtw_surveydone_event_callback(struct adapter *adapter, u8 *pbuf);
+void rtw_joinbss_event_callback(struct adapter *adapter, u8 *pbuf);
+void rtw_stassoc_event_callback(struct adapter *adapter, u8 *pbuf);
+void rtw_stadel_event_callback(struct adapter *adapter, u8 *pbuf);
+void rtw_atimdone_event_callback(struct adapter *adapter, u8 *pbuf);
+void rtw_cpwm_event_callback(struct adapter *adapter, u8 *pbuf);
+void indicate_wx_scan_complete_event(struct adapter *padapter);
+void rtw_indicate_wx_assoc_event(struct adapter *padapter);
+void rtw_indicate_wx_disassoc_event(struct adapter *padapter);
+int event_thread(void *context);
+#if LINUX_VERSION_CODE < KERNEL_VERSION(4, 15, 0)
+void rtw_join_timeout_handler (void *FunctionContext);
+void _rtw_scan_timeout_handler(void *FunctionContext);
+#else
+void rtw_join_timeout_handler (struct timer_list *t);
+void _rtw_scan_timeout_handler (struct timer_list *t);
+#endif
+void rtw_free_network_queue(struct adapter *adapter, u8 isfreeall);
+int rtw_init_mlme_priv(struct adapter *adapter);
+void rtw_free_mlme_priv (struct mlme_priv *pmlmepriv);
+int rtw_select_and_join_from_scanned_queue(struct mlme_priv *pmlmepriv);
+int rtw_set_key(struct adapter *adapter, struct security_priv *psecuritypriv,
+ int keyid, u8 set_tx);
+int rtw_set_auth(struct adapter *adapter, struct security_priv *psecuritypriv);
+
+static inline u8 *get_bssid(struct mlme_priv *pmlmepriv)
+{ /* if sta_mode:pmlmepriv->cur_network.network.MacAddress=> bssid */
+ /* if adhoc_mode:pmlmepriv->cur_network.network.MacAddress=> ibss mac address */
+ return pmlmepriv->cur_network.network.MacAddress;
+}
+
+static inline int check_fwstate(struct mlme_priv *pmlmepriv, int state)
+{
+ if (pmlmepriv->fw_state & state)
+ return true;
+
+ return false;
+}
+
+static inline int get_fwstate(struct mlme_priv *pmlmepriv)
+{
+ return pmlmepriv->fw_state;
+}
+
+/*
+ * No Limit on the calling context,
+ * therefore set it to be the critical section...
+ *
+ * ### NOTE:#### (!!!!)
+ * MUST TAKE CARE THAT BEFORE CALLING THIS FUNC, YOU SHOULD HAVE LOCKED pmlmepriv->lock
+ */
+static inline void set_fwstate(struct mlme_priv *pmlmepriv, int state)
+{
+ pmlmepriv->fw_state |= state;
+ /* FOR HW integration */
+ if (_FW_UNDER_SURVEY==state)
+ pmlmepriv->bScanInProcess = true;
+}
+
+static inline void _clr_fwstate_(struct mlme_priv *pmlmepriv, int state)
+{
+ pmlmepriv->fw_state &= ~state;
+ /* FOR HW integration */
+ if (_FW_UNDER_SURVEY==state)
+ pmlmepriv->bScanInProcess = false;
+}
+
+/*
+ * No Limit on the calling context,
+ * therefore set it to be the critical section...
+ */
+static inline void clr_fwstate(struct mlme_priv *pmlmepriv, int state)
+{
+ spin_lock_bh(&pmlmepriv->lock);
+ if (check_fwstate(pmlmepriv, state) == true)
+ pmlmepriv->fw_state ^= state;
+ spin_unlock_bh(&pmlmepriv->lock);
+}
+
+static inline void clr_fwstate_ex(struct mlme_priv *pmlmepriv, int state)
+{
+ spin_lock_bh(&pmlmepriv->lock);
+ _clr_fwstate_(pmlmepriv, state);
+ spin_unlock_bh(&pmlmepriv->lock);
+}
+
+static inline void up_scanned_network(struct mlme_priv *pmlmepriv)
+{
+ spin_lock_bh(&pmlmepriv->lock);
+ pmlmepriv->num_of_scanned++;
+ spin_unlock_bh(&pmlmepriv->lock);
+}
+
+static inline void down_scanned_network(struct mlme_priv *pmlmepriv)
+{
+ spin_lock_bh(&pmlmepriv->lock);
+ pmlmepriv->num_of_scanned--;
+ spin_unlock_bh(&pmlmepriv->lock);
+}
+
+static inline void set_scanned_network_val(struct mlme_priv *pmlmepriv, int val)
+{
+ spin_lock_bh(&pmlmepriv->lock);
+ pmlmepriv->num_of_scanned = val;
+ spin_unlock_bh(&pmlmepriv->lock);
+}
+
+u16 rtw_get_capability(struct wlan_bssid_ex *bss);
+void rtw_update_scanned_network(struct adapter *adapter,
+ struct wlan_bssid_ex *target);
+void rtw_disconnect_hdl_under_linked(struct adapter *adapter,
+ struct sta_info *psta, u8 free_assoc);
+void rtw_generate_random_ibss(u8 *pibss);
+struct wlan_network *rtw_find_network(struct __queue *scanned_queue, u8 *addr);
+struct wlan_network *rtw_get_oldest_wlan_network(struct __queue *scanned_queue);
+
+void rtw_free_assoc_resources(struct adapter *adapter, int lock_scanned_queue);
+void rtw_indicate_disconnect(struct adapter *adapter);
+void rtw_indicate_connect(struct adapter *adapter);
+void rtw_indicate_scan_done( struct adapter *padapter, bool aborted);
+void rtw_scan_abort(struct adapter *adapter);
+
+int rtw_restruct_sec_ie(struct adapter *adapter, u8 *in_ie, u8 *out_ie,
+ uint in_len);
+int rtw_restruct_wmm_ie(struct adapter *adapter, u8 *in_ie, u8 *out_ie,
+ uint in_len, uint initial_out_len);
+void rtw_init_registrypriv_dev_network(struct adapter *adapter);
+
+void rtw_update_registrypriv_dev_network(struct adapter *adapter);
+
+void rtw_get_encrypt_decrypt_from_registrypriv(struct adapter *adapter);
+
+void _rtw_join_timeout_handler(struct adapter *adapter);
+void rtw_scan_timeout_handler(struct adapter *adapter);
+
+ void rtw_dynamic_check_timer_handlder(struct adapter *adapter);
+#define rtw_is_scan_deny(adapter) false
+#define rtw_clear_scan_deny(adapter) do {} while (0)
+#define rtw_set_scan_deny_timer_hdl(adapter) do {} while (0)
+#define rtw_set_scan_deny(adapter, ms) do {} while (0)
+
+int _rtw_init_mlme_priv(struct adapter *padapter);
+
+void rtw_free_mlme_priv_ie_data(struct mlme_priv *pmlmepriv);
+
+void _rtw_free_mlme_priv(struct mlme_priv *pmlmepriv);
+
+int _rtw_enqueue_network(struct __queue *queue, struct wlan_network *pnetwork);
+
+struct wlan_network *_rtw_dequeue_network(struct __queue *queue);
+
+ struct wlan_network *_rtw_alloc_network(struct mlme_priv *pmlmepriv);
+
+void _rtw_free_network(struct mlme_priv *pmlmepriv,
+ struct wlan_network *pnetwork, u8 isfreeall);
+void _rtw_free_network_nolock(struct mlme_priv *pmlmepriv,
+ struct wlan_network *pnetwork);
+
+struct wlan_network* _rtw_find_network(struct __queue *scanned_queue, u8 *addr);
+
+void _rtw_free_network_queue(struct adapter *padapter, u8 isfreeall);
+
+int rtw_if_up(struct adapter *padapter);
+
+u8 *rtw_get_capability_from_ie(u8 *ie);
+u8 *rtw_get_timestampe_from_ie(u8 *ie);
+u8 *rtw_get_beacon_interval_from_ie(u8 *ie);
+
+void rtw_joinbss_reset(struct adapter *padapter);
+
+unsigned int rtw_restructure_ht_ie(struct adapter *padapter, u8 *in_ie,
+ u8 *out_ie, uint in_len, uint *pout_len);
+void rtw_update_ht_cap(struct adapter *padapter, u8 *pie, uint ie_len);
+void rtw_issue_addbareq_cmd(struct adapter *padapter,
+ struct xmit_frame *pxmitframe);
+
+int rtw_is_same_ibss(struct adapter *adapter, struct wlan_network *pnetwork);
+int is_same_network(struct wlan_bssid_ex *src, struct wlan_bssid_ex *dst);
+
+void rtw_roaming(struct adapter *padapter, struct wlan_network *tgt_network);
+void _rtw_roaming(struct adapter *padapter, struct wlan_network *tgt_network);
+void rtw_set_roaming(struct adapter *adapter, u8 to_roaming);
+u8 rtw_to_roaming(struct adapter *adapter);
+
+void rtw_sta_media_status_rpt(struct adapter *adapter, struct sta_info *psta,
+ u32 mstatus);
+
+#endif /* __RTL871X_MLME_H_ */
diff --git a/drivers/staging/r8188eu/include/rtw_mlme_ext.h b/drivers/staging/r8188eu/include/rtw_mlme_ext.h
new file mode 100644
index 000000000000..fdb79587762e
--- /dev/null
+++ b/drivers/staging/r8188eu/include/rtw_mlme_ext.h
@@ -0,0 +1,874 @@
+/******************************************************************************
+ *
+ * Copyright(c) 2007 - 2011 Realtek Corporation. All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of version 2 of the GNU General Public License as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
+ * more details.
+ *
+ * You should have received a copy of the GNU General Public License along with
+ * this program; if not, write to the Free Software Foundation, Inc.,
+ * 51 Franklin Street, Fifth Floor, Boston, MA 02110, USA
+ *
+ *
+ ******************************************************************************/
+#ifndef __RTW_MLME_EXT_H_
+#define __RTW_MLME_EXT_H_
+
+#include <osdep_service.h>
+#include <drv_types.h>
+#include <wlan_bssdef.h>
+
+/* Commented by Albert 20101105 */
+/* Increase the SURVEY_TO value from 100 to 150 ( 100ms to 150ms ) */
+/* The Realtek 8188CE SoftAP will spend around 100ms to send the probe response after receiving the probe request. */
+/* So, this driver tried to extend the dwell time for each scanning channel. */
+/* This will increase the chance to receive the probe response from SoftAP. */
+
+#define SURVEY_TO (100)
+#define REAUTH_TO (300) /* 50) */
+#define REASSOC_TO (300) /* 50) */
+/* define DISCONNECT_TO (3000) */
+#define ADDBA_TO (2000)
+
+#define LINKED_TO (1) /* unit:2 sec, 1x2=2 sec */
+
+#define REAUTH_LIMIT (4)
+#define REASSOC_LIMIT (4)
+#define READDBA_LIMIT (2)
+
+#define ROAMING_LIMIT 8
+
+#define DYNAMIC_FUNC_DISABLE (0x0)
+
+/* ====== ODM_ABILITY_E ======== */
+/* BB ODM section BIT 0-15 */
+#define DYNAMIC_BB_DIG BIT(0)
+#define DYNAMIC_BB_RA_MASK BIT(1)
+#define DYNAMIC_BB_DYNAMIC_TXPWR BIT(2)
+#define DYNAMIC_BB_BB_FA_CNT BIT(3)
+
+#define DYNAMIC_BB_RSSI_MONITOR BIT(4)
+#define DYNAMIC_BB_CCK_PD BIT(5)
+#define DYNAMIC_BB_ANT_DIV BIT(6)
+#define DYNAMIC_BB_PWR_SAVE BIT(7)
+#define DYNAMIC_BB_PWR_TRA BIT(8)
+#define DYNAMIC_BB_RATE_ADAPTIVE BIT(9)
+#define DYNAMIC_BB_PATH_DIV BIT(10)
+#define DYNAMIC_BB_PSD BIT(11)
+
+/* MAC DM section BIT 16-23 */
+#define DYNAMIC_MAC_EDCA_TURBO BIT(16)
+#define DYNAMIC_MAC_EARLY_MODE BIT(17)
+
+/* RF ODM section BIT 24-31 */
+#define DYNAMIC_RF_TX_PWR_TRACK BIT(24)
+#define DYNAMIC_RF_RX_GAIN_TRACK BIT(25)
+#define DYNAMIC_RF_CALIBRATION BIT(26)
+
+#define DYNAMIC_ALL_FUNC_ENABLE 0xFFFFFFF
+
+#define _HW_STATE_NOLINK_ 0x00
+#define _HW_STATE_ADHOC_ 0x01
+#define _HW_STATE_STATION_ 0x02
+#define _HW_STATE_AP_ 0x03
+
+#define _1M_RATE_ 0
+#define _2M_RATE_ 1
+#define _5M_RATE_ 2
+#define _11M_RATE_ 3
+#define _6M_RATE_ 4
+#define _9M_RATE_ 5
+#define _12M_RATE_ 6
+#define _18M_RATE_ 7
+#define _24M_RATE_ 8
+#define _36M_RATE_ 9
+#define _48M_RATE_ 10
+#define _54M_RATE_ 11
+
+extern unsigned char RTW_WPA_OUI[];
+extern unsigned char WMM_OUI[];
+extern unsigned char WPS_OUI[];
+extern unsigned char WFD_OUI[];
+extern unsigned char P2P_OUI[];
+
+extern unsigned char WMM_INFO_OUI[];
+extern unsigned char WMM_PARA_OUI[];
+
+/* Channel Plan Type. */
+/* Note: */
+/* We just add new channel plan when the new channel plan is different
+ * from any of the following channel plan. */
+/* If you just want to customize the actions(scan period or join actions)
+ * about one of the channel plan, */
+/* customize them in struct rt_channel_info in the RT_CHANNEL_LIST. */
+enum RT_CHANNEL_DOMAIN {
+ /* old channel plan mapping ===== */
+ RT_CHANNEL_DOMAIN_FCC = 0x00,
+ RT_CHANNEL_DOMAIN_IC = 0x01,
+ RT_CHANNEL_DOMAIN_ETSI = 0x02,
+ RT_CHANNEL_DOMAIN_SPAIN = 0x03,
+ RT_CHANNEL_DOMAIN_FRANCE = 0x04,
+ RT_CHANNEL_DOMAIN_MKK = 0x05,
+ RT_CHANNEL_DOMAIN_MKK1 = 0x06,
+ RT_CHANNEL_DOMAIN_ISRAEL = 0x07,
+ RT_CHANNEL_DOMAIN_TELEC = 0x08,
+ RT_CHANNEL_DOMAIN_GLOBAL_DOAMIN = 0x09,
+ RT_CHANNEL_DOMAIN_WORLD_WIDE_13 = 0x0A,
+ RT_CHANNEL_DOMAIN_TAIWAN = 0x0B,
+ RT_CHANNEL_DOMAIN_CHINA = 0x0C,
+ RT_CHANNEL_DOMAIN_SINGAPORE_INDIA_MEXICO = 0x0D,
+ RT_CHANNEL_DOMAIN_KOREA = 0x0E,
+ RT_CHANNEL_DOMAIN_TURKEY = 0x0F,
+ RT_CHANNEL_DOMAIN_JAPAN = 0x10,
+ RT_CHANNEL_DOMAIN_FCC_NO_DFS = 0x11,
+ RT_CHANNEL_DOMAIN_JAPAN_NO_DFS = 0x12,
+ RT_CHANNEL_DOMAIN_WORLD_WIDE_5G = 0x13,
+ RT_CHANNEL_DOMAIN_TAIWAN_NO_DFS = 0x14,
+
+ /* new channel plan mapping, (2GDOMAIN_5GDOMAIN) ===== */
+ RT_CHANNEL_DOMAIN_WORLD_NULL = 0x20,
+ RT_CHANNEL_DOMAIN_ETSI1_NULL = 0x21,
+ RT_CHANNEL_DOMAIN_FCC1_NULL = 0x22,
+ RT_CHANNEL_DOMAIN_MKK1_NULL = 0x23,
+ RT_CHANNEL_DOMAIN_ETSI2_NULL = 0x24,
+ RT_CHANNEL_DOMAIN_FCC1_FCC1 = 0x25,
+ RT_CHANNEL_DOMAIN_WORLD_ETSI1 = 0x26,
+ RT_CHANNEL_DOMAIN_MKK1_MKK1 = 0x27,
+ RT_CHANNEL_DOMAIN_WORLD_KCC1 = 0x28,
+ RT_CHANNEL_DOMAIN_WORLD_FCC2 = 0x29,
+ RT_CHANNEL_DOMAIN_WORLD_FCC3 = 0x30,
+ RT_CHANNEL_DOMAIN_WORLD_FCC4 = 0x31,
+ RT_CHANNEL_DOMAIN_WORLD_FCC5 = 0x32,
+ RT_CHANNEL_DOMAIN_WORLD_FCC6 = 0x33,
+ RT_CHANNEL_DOMAIN_FCC1_FCC7 = 0x34,
+ RT_CHANNEL_DOMAIN_WORLD_ETSI2 = 0x35,
+ RT_CHANNEL_DOMAIN_WORLD_ETSI3 = 0x36,
+ RT_CHANNEL_DOMAIN_MKK1_MKK2 = 0x37,
+ RT_CHANNEL_DOMAIN_MKK1_MKK3 = 0x38,
+ RT_CHANNEL_DOMAIN_FCC1_NCC1 = 0x39,
+ RT_CHANNEL_DOMAIN_FCC1_NCC2 = 0x40,
+ RT_CHANNEL_DOMAIN_GLOBAL_DOAMIN_2G = 0x41,
+ /* Add new channel plan above this line=============== */
+ RT_CHANNEL_DOMAIN_MAX,
+ RT_CHANNEL_DOMAIN_REALTEK_DEFINE = 0x7F,
+};
+
+enum RT_CHANNEL_DOMAIN_2G {
+ RT_CHANNEL_DOMAIN_2G_WORLD = 0x00, /* Worldwide 13 */
+ RT_CHANNEL_DOMAIN_2G_ETSI1 = 0x01, /* Europe */
+ RT_CHANNEL_DOMAIN_2G_FCC1 = 0x02, /* US */
+ RT_CHANNEL_DOMAIN_2G_MKK1 = 0x03, /* Japan */
+ RT_CHANNEL_DOMAIN_2G_ETSI2 = 0x04, /* France */
+ RT_CHANNEL_DOMAIN_2G_NULL = 0x05,
+ /* Add new channel plan above this line=============== */
+ RT_CHANNEL_DOMAIN_2G_MAX,
+};
+
+#define rtw_is_channel_plan_valid(chplan) \
+ (chplan < RT_CHANNEL_DOMAIN_MAX || \
+ chplan == RT_CHANNEL_DOMAIN_REALTEK_DEFINE)
+
+struct rt_channel_plan {
+ unsigned char Channel[MAX_CHANNEL_NUM];
+ unsigned char Len;
+};
+
+struct rt_channel_plan_2g {
+ unsigned char Channel[MAX_CHANNEL_NUM_2G];
+ unsigned char Len;
+};
+
+struct rt_channel_plan_map {
+ unsigned char Index2G;
+};
+
+enum Associated_AP {
+ atherosAP = 0,
+ broadcomAP = 1,
+ ciscoAP = 2,
+ marvellAP = 3,
+ ralinkAP = 4,
+ realtekAP = 5,
+ airgocapAP = 6,
+ unknownAP = 7,
+ maxAP,
+};
+
+enum HT_IOT_PEER {
+ HT_IOT_PEER_UNKNOWN = 0,
+ HT_IOT_PEER_REALTEK = 1,
+ HT_IOT_PEER_REALTEK_92SE = 2,
+ HT_IOT_PEER_BROADCOM = 3,
+ HT_IOT_PEER_RALINK = 4,
+ HT_IOT_PEER_ATHEROS = 5,
+ HT_IOT_PEER_CISCO = 6,
+ HT_IOT_PEER_MERU = 7,
+ HT_IOT_PEER_MARVELL = 8,
+ HT_IOT_PEER_REALTEK_SOFTAP = 9,/* peer is RealTek SOFT_AP */
+ HT_IOT_PEER_SELF_SOFTAP = 10, /* Self is SoftAP */
+ HT_IOT_PEER_AIRGO = 11,
+ HT_IOT_PEER_INTEL = 12,
+ HT_IOT_PEER_RTK_APCLIENT = 13,
+ HT_IOT_PEER_REALTEK_81XX = 14,
+ HT_IOT_PEER_REALTEK_WOW = 15,
+ HT_IOT_PEER_TENDA = 16,
+ HT_IOT_PEER_MAX = 17
+};
+
+enum SCAN_STATE {
+ SCAN_DISABLE = 0,
+ SCAN_START = 1,
+ SCAN_TXNULL = 2,
+ SCAN_PROCESS = 3,
+ SCAN_COMPLETE = 4,
+ SCAN_STATE_MAX,
+};
+
+struct mlme_handler {
+ unsigned int num;
+ char *str;
+ unsigned int (*func)(struct adapter *adapt, struct recv_frame *frame);
+};
+
+struct action_handler {
+ unsigned int num;
+ char* str;
+ unsigned int (*func)(struct adapter *adapt, struct recv_frame *frame);
+};
+
+struct ss_res {
+ int state;
+ int bss_cnt;
+ int channel_idx;
+ int scan_mode;
+ u8 ssid_num;
+ u8 ch_num;
+ struct ndis_802_11_ssid ssid[RTW_SSID_SCAN_AMOUNT];
+ struct rtw_ieee80211_channel ch[RTW_CHANNEL_SCAN_AMOUNT];
+};
+
+/* define AP_MODE 0x0C */
+/* define STATION_MODE 0x08 */
+/* define AD_HOC_MODE 0x04 */
+/* define NO_LINK_MODE 0x00 */
+
+#define WIFI_FW_NULL_STATE _HW_STATE_NOLINK_
+#define WIFI_FW_STATION_STATE _HW_STATE_STATION_
+#define WIFI_FW_AP_STATE _HW_STATE_AP_
+#define WIFI_FW_ADHOC_STATE _HW_STATE_ADHOC_
+
+#define WIFI_FW_AUTH_NULL 0x00000100
+#define WIFI_FW_AUTH_STATE 0x00000200
+#define WIFI_FW_AUTH_SUCCESS 0x00000400
+
+#define WIFI_FW_ASSOC_STATE 0x00002000
+#define WIFI_FW_ASSOC_SUCCESS 0x00004000
+
+#define WIFI_FW_LINKING_STATE (WIFI_FW_AUTH_NULL | \
+ WIFI_FW_AUTH_STATE | \
+ WIFI_FW_AUTH_SUCCESS | \
+ WIFI_FW_ASSOC_STATE)
+
+struct FW_Sta_Info {
+ struct sta_info *psta;
+ u32 status;
+ u32 rx_pkt;
+ u32 retry;
+ unsigned char SupportedRates[NDIS_802_11_LENGTH_RATES_EX];
+};
+
+/*
+ * Usage:
+ * When one iface acted as AP mode and the other iface is STA mode and scanning,
+ * it should switch back to AP's operating channel periodically.
+ * Parameters info:
+ * When the driver scanned RTW_SCAN_NUM_OF_CH channels, it would switch back to
+ * AP's operating channel for
+ * RTW_STAY_AP_CH_MILLISECOND * SURVEY_TO milliseconds.
+ * Example:
+ * For chip supports 2.4G + 5GHz and AP mode is operating in channel 1,
+ * RTW_SCAN_NUM_OF_CH is 8, RTW_STAY_AP_CH_MS is 3 and SURVEY_TO is 100.
+ * When it's STA mode gets set_scan command,
+ * it would
+ * 1. Doing the scan on channel 1.2.3.4.5.6.7.8
+ * 2. Back to channel 1 for 300 milliseconds
+ * 3. Go through doing site survey on channel 9.10.11.36.40.44.48.52
+ * 4. Back to channel 1 for 300 milliseconds
+ * 5. ... and so on, till survey done.
+ */
+
+struct mlme_ext_info {
+ u32 state;
+ u32 reauth_count;
+ u32 reassoc_count;
+ u32 link_count;
+ u32 auth_seq;
+ u32 auth_algo; /* 802.11 auth, could be open, shared, auto */
+ u32 authModeToggle;
+ u32 enc_algo;/* encrypt algorithm; */
+ u32 key_index; /* this is only valid for legacy wep,
+ * 0~3 for key id. */
+ u32 iv;
+ u8 chg_txt[128];
+ u16 aid;
+ u16 bcn_interval;
+ u16 capability;
+ u8 assoc_AP_vendor;
+ u8 slotTime;
+ u8 preamble_mode;
+ u8 WMM_enable;
+ u8 ERP_enable;
+ u8 ERP_IE;
+ u8 HT_enable;
+ u8 HT_caps_enable;
+ u8 HT_info_enable;
+ u8 HT_protection;
+ u8 turboMode_cts2self;
+ u8 turboMode_rtsen;
+ u8 SM_PS;
+ u8 agg_enable_bitmap;
+ u8 ADDBA_retry_count;
+ u8 candidate_tid_bitmap;
+ u8 dialogToken;
+ /* Accept ADDBA Request */
+ bool bAcceptAddbaReq;
+ u8 bwmode_updated;
+ u8 hidden_ssid_mode;
+
+ struct ADDBA_request ADDBA_req;
+ struct WMM_para_element WMM_param;
+ struct HT_caps_element HT_caps;
+ struct HT_info_element HT_info;
+ struct wlan_bssid_ex network;/* join network or bss_network,
+ * if in ap mode, it is the same
+ * as cur_network.network */
+ struct FW_Sta_Info FW_sta_info[NUM_STA];
+};
+
+/* The channel information about this channel including joining,
+ * scanning, and power constraints. */
+struct rt_channel_info {
+ u8 ChannelNum; /* The channel number. */
+ enum rt_scan_type ScanType; /* Scan type such as passive
+ * or active scan. */
+ u32 rx_count;
+};
+
+int rtw_ch_set_search_ch(struct rt_channel_info *ch_set, const u32 ch);
+
+/* P2P_MAX_REG_CLASSES - Maximum number of regulatory classes */
+#define P2P_MAX_REG_CLASSES 10
+
+/* P2P_MAX_REG_CLASS_CHANNELS - Maximum number of chan per regulatory class */
+#define P2P_MAX_REG_CLASS_CHANNELS 20
+
+/* struct p2p_channels - List of supported channels */
+struct p2p_channels {
+ /* struct p2p_reg_class - Supported regulatory class */
+ struct p2p_reg_class {
+ /* reg_class - Regulatory class (IEEE 802.11-2007, Annex J) */
+ u8 reg_class;
+
+ /* channel - Supported channels */
+ u8 channel[P2P_MAX_REG_CLASS_CHANNELS];
+
+ /* channels - Number of channel entries in use */
+ size_t channels;
+ } reg_class[P2P_MAX_REG_CLASSES];
+
+ /* reg_classes - Number of reg_class entries in use */
+ size_t reg_classes;
+};
+
+struct p2p_oper_class_map {
+ enum hw_mode {IEEE80211G} mode;
+ u8 op_class;
+ u8 min_chan;
+ u8 max_chan;
+ u8 inc;
+ enum {BW20, BW40PLUS, BW40MINUS} bw;
+};
+
+struct mlme_ext_priv {
+ struct adapter *padapter;
+ u8 mlmeext_init;
+ ATOMIC_T event_seq;
+ u16 mgnt_seq;
+
+ unsigned char cur_channel;
+ unsigned char cur_bwmode;
+ unsigned char cur_ch_offset;/* PRIME_CHNL_OFFSET */
+ unsigned char cur_wireless_mode; /* NETWORK_TYPE */
+
+ unsigned char oper_channel; /* saved chan info when call
+ * set_channel_bw */
+ unsigned char oper_bwmode;
+ unsigned char oper_ch_offset;/* PRIME_CHNL_OFFSET */
+
+ unsigned char max_chan_nums;
+ struct rt_channel_info channel_set[MAX_CHANNEL_NUM];
+ struct p2p_channels channel_list;
+ unsigned char basicrate[NumRates];
+ unsigned char datarate[NumRates];
+
+ struct ss_res sitesurvey_res;
+ struct mlme_ext_info mlmext_info;/* for sta/adhoc mode, including
+ * current scan/connecting/connected
+ * related info. For ap mode,
+ * network includes ap's cap_info*/
+ struct timer_list survey_timer;
+ struct timer_list link_timer;
+ u16 chan_scan_time;
+
+ u8 scan_abort;
+ u8 tx_rate; /* TXRATE when USERATE is set. */
+
+ u32 retry; /* retry for issue probereq */
+
+ u64 TSFValue;
+
+#ifdef CONFIG_88EU_AP_MODE
+ unsigned char bstart_bss;
+#endif
+ u8 update_channel_plan_by_ap_done;
+ /* recv_decache check for Action_public frame */
+ u8 action_public_dialog_token;
+ u16 action_public_rxseq;
+ u8 active_keep_alive_check;
+};
+
+int init_mlme_ext_priv(struct adapter *adapter);
+int init_hw_mlme_ext(struct adapter *padapter);
+void free_mlme_ext_priv (struct mlme_ext_priv *pmlmeext);
+extern void init_mlme_ext_timer(struct adapter *padapter);
+extern void init_addba_retry_timer(struct adapter *adapt, struct sta_info *sta);
+extern struct xmit_frame *alloc_mgtxmitframe(struct xmit_priv *pxmitpriv);
+
+unsigned char networktype_to_raid(unsigned char network_type);
+u8 judge_network_type(struct adapter *padapter, unsigned char *rate, int len);
+void get_rate_set(struct adapter *padapter, unsigned char *pbssrate, int *len);
+void UpdateBrateTbl(struct adapter *padapter, u8 *mBratesOS);
+void UpdateBrateTblForSoftAP(u8 *bssrateset, u32 bssratelen);
+
+void Save_DM_Func_Flag(struct adapter *padapter);
+void Restore_DM_Func_Flag(struct adapter *padapter);
+void Switch_DM_Func(struct adapter *padapter, u32 mode, u8 enable);
+
+void Set_MSR(struct adapter *padapter, u8 type);
+
+u8 rtw_get_oper_ch(struct adapter *adapter);
+void rtw_set_oper_ch(struct adapter *adapter, u8 ch);
+u8 rtw_get_oper_bw(struct adapter *adapter);
+void rtw_set_oper_bw(struct adapter *adapter, u8 bw);
+u8 rtw_get_oper_choffset(struct adapter *adapter);
+void rtw_set_oper_choffset(struct adapter *adapter, u8 offset);
+
+void set_channel_bwmode(struct adapter *padapter, unsigned char channel,
+ unsigned char channel_offset, unsigned short bwmode);
+void SelectChannel(struct adapter *padapter, unsigned char channel);
+void SetBWMode(struct adapter *padapter, unsigned short bwmode,
+ unsigned char channel_offset);
+
+unsigned int decide_wait_for_beacon_timeout(unsigned int bcn_interval);
+
+void write_cam(struct adapter *padapter, u8 entry, u16 ctrl, u8 *mac, u8 *key);
+void clear_cam_entry(struct adapter *padapter, u8 entry);
+
+void invalidate_cam_all(struct adapter *padapter);
+void CAM_empty_entry(struct adapter * Adapter, u8 ucIndex);
+
+int allocate_fw_sta_entry(struct adapter *padapter);
+void flush_all_cam_entry(struct adapter *padapter);
+
+void site_survey(struct adapter *padapter);
+u8 collect_bss_info(struct adapter *padapter, struct recv_frame *precv_frame,
+ struct wlan_bssid_ex *bssid);
+void update_network(struct wlan_bssid_ex *dst, struct wlan_bssid_ex *src,
+ struct adapter *adapter, bool update_ie);
+
+int get_bsstype(unsigned short capability);
+u8 *get_my_bssid(struct wlan_bssid_ex *pnetwork);
+u16 get_beacon_interval(struct wlan_bssid_ex *bss);
+
+int is_client_associated_to_ap(struct adapter *padapter);
+int is_client_associated_to_ibss(struct adapter *padapter);
+int is_IBSS_empty(struct adapter *padapter);
+
+unsigned char check_assoc_AP(u8 *pframe, uint len);
+
+int WMM_param_handler(struct adapter *padapter, struct ndis_802_11_var_ie *pIE);
+void WMMOnAssocRsp(struct adapter *padapter);
+
+void HT_caps_handler(struct adapter *padapter, struct ndis_802_11_var_ie *pIE);
+void HT_info_handler(struct adapter *padapter, struct ndis_802_11_var_ie *pIE);
+void HTOnAssocRsp(struct adapter *padapter);
+
+void ERP_IE_handler(struct adapter *padapter, struct ndis_802_11_var_ie *pIE);
+void VCS_update(struct adapter *padapter, struct sta_info *psta);
+
+void update_beacon_info(struct adapter *padapter, u8 *pframe, uint len,
+ struct sta_info *psta);
+int rtw_check_bcn_info(struct adapter *Adapter, u8 *pframe, u32 packet_len);
+void update_IOT_info(struct adapter *padapter);
+void update_capinfo(struct adapter *adapter, u16 updatecap);
+void update_wireless_mode(struct adapter *padapter);
+void update_tx_basic_rate(struct adapter *padapter, u8 modulation);
+void update_bmc_sta_support_rate(struct adapter *padapter, u32 mac_id);
+int update_sta_support_rate(struct adapter *padapter, u8 *pvar_ie,
+ uint var_ie_len, int cam_idx);
+
+/* for sta/adhoc mode */
+void update_sta_info(struct adapter *padapter, struct sta_info *psta);
+unsigned int update_basic_rate(unsigned char *ptn, unsigned int ptn_sz);
+unsigned int update_supported_rate(unsigned char *ptn, unsigned int ptn_sz);
+unsigned int update_MSC_rate(struct HT_caps_element *pHT_caps);
+void Update_RA_Entry(struct adapter *padapter, u32 mac_id);
+void set_sta_rate(struct adapter *padapter, struct sta_info *psta);
+
+unsigned int receive_disconnect(struct adapter *padapter,
+ unsigned char *macaddr, unsigned short reason);
+
+unsigned char get_highest_rate_idx(u32 mask);
+int support_short_GI(struct adapter *padapter, struct HT_caps_element *caps);
+unsigned int is_ap_in_tkip(struct adapter *padapter);
+unsigned int is_ap_in_wep(struct adapter *padapter);
+unsigned int should_forbid_n_rate(struct adapter *padapter);
+
+void report_join_res(struct adapter *padapter, int res);
+void report_survey_event(struct adapter *padapter, struct recv_frame *precv_frame);
+void report_surveydone_event(struct adapter *padapter);
+void report_del_sta_event(struct adapter *padapter,
+ unsigned char *addr, unsigned short reason);
+void report_add_sta_event(struct adapter *padapter, unsigned char* addr,
+ int cam_idx);
+
+void beacon_timing_control(struct adapter *padapter);
+extern u8 set_tx_beacon_cmd(struct adapter*padapter);
+unsigned int setup_beacon_frame(struct adapter *padapter,
+ unsigned char *beacon_frame);
+void update_mgnt_tx_rate(struct adapter *padapter, u8 rate);
+void update_mgntframe_attrib(struct adapter *padapter,
+ struct pkt_attrib *pattrib);
+void dump_mgntframe(struct adapter *padapter, struct xmit_frame *pmgntframe);
+s32 dump_mgntframe_and_wait(struct adapter *padapter,
+ struct xmit_frame *pmgntframe, int timeout_ms);
+s32 dump_mgntframe_and_wait_ack(struct adapter *padapter,
+ struct xmit_frame *pmgntframe);
+
+#ifdef CONFIG_88EU_P2P
+void issue_probersp_p2p(struct adapter *padapter, unsigned char *da);
+void issue_p2p_provision_request(struct adapter *padapter, u8 *pssid,
+ u8 ussidlen, u8 *pdev_raddr);
+void issue_p2p_GO_request(struct adapter *padapter, u8 *raddr);
+void issue_probereq_p2p(struct adapter *padapter, u8 *da);
+int issue_probereq_p2p_ex(struct adapter *adapter, u8 *da, int try_cnt,
+ int wait_ms);
+void issue_p2p_invitation_response(struct adapter *padapter, u8 *raddr,
+ u8 dialogToken, u8 success);
+void issue_p2p_invitation_request(struct adapter *padapter, u8* raddr);
+#endif /* CONFIG_88EU_P2P */
+void issue_beacon(struct adapter *padapter, int timeout_ms);
+void issue_probersp(struct adapter *padapter, unsigned char *da,
+ u8 is_valid_p2p_probereq);
+void issue_assocreq(struct adapter *padapter);
+void issue_asocrsp(struct adapter *padapter, unsigned short status,
+ struct sta_info *pstat, int pkt_type);
+void issue_auth(struct adapter *padapter, struct sta_info *psta,
+ unsigned short status);
+void issue_probereq(struct adapter *padapter, struct ndis_802_11_ssid *pssid,
+ u8 *da);
+s32 issue_probereq_ex(struct adapter *adapter, struct ndis_802_11_ssid *pssid,
+ u8* da, int try_cnt, int wait_ms);
+int issue_nulldata(struct adapter *padapter, unsigned char *da,
+ unsigned int power_mode, int try_cnt, int wait_ms);
+int issue_qos_nulldata(struct adapter *padapter, unsigned char *da,
+ u16 tid, int try_cnt, int wait_ms);
+int issue_deauth(struct adapter *padapter, unsigned char *da,
+ unsigned short reason);
+int issue_deauth_ex(struct adapter *padapter, u8 *da, unsigned short reason,
+ int try_cnt, int wait_ms);
+void issue_action_spct_ch_switch(struct adapter *padapter, u8 *ra, u8 new_ch,
+ u8 ch_offset);
+void issue_action_BA(struct adapter *padapter, unsigned char *raddr,
+ unsigned char action, unsigned short status);
+unsigned int send_delba(struct adapter *padapter, u8 initiator, u8 *addr);
+unsigned int send_beacon(struct adapter *padapter);
+
+void start_clnt_assoc(struct adapter *padapter);
+void start_clnt_auth(struct adapter *padapter);
+void start_clnt_join(struct adapter *padapter);
+void start_create_ibss(struct adapter *padapter);
+
+unsigned int OnAssocReq(struct adapter *padapter,
+ struct recv_frame *precv_frame);
+unsigned int OnAssocRsp(struct adapter *padapter,
+ struct recv_frame *precv_frame);
+unsigned int OnProbeReq(struct adapter *padapter,
+ struct recv_frame *precv_frame);
+unsigned int OnProbeRsp(struct adapter *padapter,
+ struct recv_frame *precv_frame);
+unsigned int DoReserved(struct adapter *padapter,
+ struct recv_frame *precv_frame);
+unsigned int OnBeacon(struct adapter *padapter,
+ struct recv_frame *precv_frame);
+unsigned int OnAtim(struct adapter *padapter,
+ struct recv_frame *precv_frame);
+unsigned int OnDisassoc(struct adapter *padapter,
+ struct recv_frame *precv_frame);
+unsigned int OnAuth(struct adapter *padapter,
+ struct recv_frame *precv_frame);
+unsigned int OnAuthClient(struct adapter *padapter,
+ struct recv_frame *precv_frame);
+unsigned int OnDeAuth(struct adapter *padapter,
+ struct recv_frame *precv_frame);
+unsigned int OnAction(struct adapter *padapter,
+ struct recv_frame *precv_frame);
+
+unsigned int on_action_spct(struct adapter *padapter,
+ struct recv_frame *precv_frame);
+unsigned int OnAction_qos(struct adapter *padapter,
+ struct recv_frame *precv_frame);
+unsigned int OnAction_dls(struct adapter *padapter,
+ struct recv_frame *precv_frame);
+unsigned int OnAction_back(struct adapter *padapter,
+ struct recv_frame *precv_frame);
+unsigned int on_action_public(struct adapter *padapter,
+ struct recv_frame *precv_frame);
+unsigned int OnAction_ht(struct adapter *padapter,
+ struct recv_frame *precv_frame);
+unsigned int OnAction_wmm(struct adapter *padapter,
+ struct recv_frame *precv_frame);
+unsigned int OnAction_p2p(struct adapter *padapter,
+ struct recv_frame *precv_frame);
+
+void mlmeext_joinbss_event_callback(struct adapter *padapter, int join_res);
+void mlmeext_sta_del_event_callback(struct adapter *padapter);
+void mlmeext_sta_add_event_callback(struct adapter *padapter,
+ struct sta_info *psta);
+
+void linked_status_chk(struct adapter *padapter);
+
+void survey_timer_hdl (struct adapter *padapter);
+void link_timer_hdl (struct adapter *padapter);
+void addba_timer_hdl(struct sta_info *psta);
+
+#define set_survey_timer(mlmeext, ms) \
+ do { \
+ _set_timer(&(mlmeext)->survey_timer, (ms)); \
+ } while (0)
+
+#define set_link_timer(mlmeext, ms) \
+ do { \
+ _set_timer(&(mlmeext)->link_timer, (ms)); \
+ } while (0)
+
+int cckrates_included(unsigned char *rate, int ratelen);
+int cckratesonly_included(unsigned char *rate, int ratelen);
+
+void process_addba_req(struct adapter *padapter, u8 *paddba_req, u8 *addr);
+
+void update_TSF(struct mlme_ext_priv *pmlmeext, u8 *pframe, uint len);
+void correct_TSF(struct adapter *padapter, struct mlme_ext_priv *pmlmeext);
+
+struct cmd_hdl {
+ uint parmsize;
+ u8 (*h2cfuns)(struct adapter *padapter, u8 *pbuf);
+};
+
+u8 read_macreg_hdl(struct adapter *padapter, u8 *pbuf);
+u8 write_macreg_hdl(struct adapter *padapter, u8 *pbuf);
+u8 read_bbreg_hdl(struct adapter *padapter, u8 *pbuf);
+u8 write_bbreg_hdl(struct adapter *padapter, u8 *pbuf);
+u8 read_rfreg_hdl(struct adapter *padapter, u8 *pbuf);
+u8 write_rfreg_hdl(struct adapter *padapter, u8 *pbuf);
+u8 NULL_hdl(struct adapter *padapter, u8 *pbuf);
+u8 join_cmd_hdl(struct adapter *padapter, u8 *pbuf);
+u8 disconnect_hdl(struct adapter *padapter, u8 *pbuf);
+u8 createbss_hdl(struct adapter *padapter, u8 *pbuf);
+u8 setopmode_hdl(struct adapter *padapter, u8 *pbuf);
+u8 sitesurvey_cmd_hdl(struct adapter *padapter, u8 *pbuf);
+u8 setauth_hdl(struct adapter *padapter, u8 *pbuf);
+u8 setkey_hdl(struct adapter *padapter, u8 *pbuf);
+u8 set_stakey_hdl(struct adapter *padapter, u8 *pbuf);
+u8 set_assocsta_hdl(struct adapter *padapter, u8 *pbuf);
+u8 del_assocsta_hdl(struct adapter *padapter, u8 *pbuf);
+u8 add_ba_hdl(struct adapter *padapter, unsigned char *pbuf);
+
+u8 mlme_evt_hdl(struct adapter *padapter, unsigned char *pbuf);
+u8 h2c_msg_hdl(struct adapter *padapter, unsigned char *pbuf);
+u8 tx_beacon_hdl(struct adapter *padapter, unsigned char *pbuf);
+u8 set_ch_hdl(struct adapter *padapter, u8 *pbuf);
+u8 set_chplan_hdl(struct adapter *padapter, unsigned char *pbuf);
+u8 led_blink_hdl(struct adapter *padapter, unsigned char *pbuf);
+/* Handling DFS channel switch announcement ie. */
+u8 set_csa_hdl(struct adapter *padapter, unsigned char *pbuf);
+u8 tdls_hdl(struct adapter *padapter, unsigned char *pbuf);
+
+#define GEN_DRV_CMD_HANDLER(size, cmd) {size, &cmd ## _hdl},
+#define GEN_MLME_EXT_HANDLER(size, cmd) {size, cmd},
+
+#ifdef _RTW_CMD_C_
+
+static struct cmd_hdl wlancmds[] = {
+ GEN_DRV_CMD_HANDLER(0, NULL) /*0*/
+ GEN_DRV_CMD_HANDLER(0, NULL)
+ GEN_DRV_CMD_HANDLER(0, NULL)
+ GEN_DRV_CMD_HANDLER(0, NULL)
+ GEN_DRV_CMD_HANDLER(0, NULL)
+ GEN_DRV_CMD_HANDLER(0, NULL)
+ GEN_MLME_EXT_HANDLER(0, NULL)
+ GEN_MLME_EXT_HANDLER(0, NULL)
+ GEN_MLME_EXT_HANDLER(0, NULL)
+ GEN_MLME_EXT_HANDLER(0, NULL)
+ GEN_MLME_EXT_HANDLER(0, NULL) /*10*/
+ GEN_MLME_EXT_HANDLER(0, NULL)
+ GEN_MLME_EXT_HANDLER(0, NULL)
+ GEN_MLME_EXT_HANDLER(0, NULL)
+ GEN_MLME_EXT_HANDLER(sizeof (struct joinbss_parm), join_cmd_hdl) /*14*/
+ GEN_MLME_EXT_HANDLER(sizeof (struct disconnect_parm), disconnect_hdl)
+ GEN_MLME_EXT_HANDLER(sizeof (struct createbss_parm), createbss_hdl)
+ GEN_MLME_EXT_HANDLER(sizeof (struct setopmode_parm), setopmode_hdl)
+ GEN_MLME_EXT_HANDLER(sizeof (struct sitesurvey_parm),
+ sitesurvey_cmd_hdl) /*18*/
+ GEN_MLME_EXT_HANDLER(sizeof (struct setauth_parm), setauth_hdl)
+ GEN_MLME_EXT_HANDLER(sizeof (struct setkey_parm), setkey_hdl) /*20*/
+ GEN_MLME_EXT_HANDLER(sizeof (struct set_stakey_parm), set_stakey_hdl)
+ GEN_MLME_EXT_HANDLER(sizeof (struct set_assocsta_parm), NULL)
+ GEN_MLME_EXT_HANDLER(sizeof (struct del_assocsta_parm), NULL)
+ GEN_MLME_EXT_HANDLER(sizeof (struct setstapwrstate_parm), NULL)
+ GEN_MLME_EXT_HANDLER(sizeof (struct setbasicrate_parm), NULL)
+ GEN_MLME_EXT_HANDLER(sizeof (struct getbasicrate_parm), NULL)
+ GEN_MLME_EXT_HANDLER(sizeof (struct setdatarate_parm), NULL)
+ GEN_MLME_EXT_HANDLER(sizeof (struct getdatarate_parm), NULL)
+ GEN_MLME_EXT_HANDLER(sizeof (struct setphyinfo_parm), NULL)
+ GEN_MLME_EXT_HANDLER(sizeof (struct getphyinfo_parm), NULL) /*30*/
+ GEN_MLME_EXT_HANDLER(sizeof (struct setphy_parm), NULL)
+ GEN_MLME_EXT_HANDLER(sizeof (struct getphy_parm), NULL)
+ GEN_MLME_EXT_HANDLER(0, NULL)
+ GEN_MLME_EXT_HANDLER(0, NULL)
+ GEN_MLME_EXT_HANDLER(0, NULL)
+ GEN_MLME_EXT_HANDLER(0, NULL)
+ GEN_MLME_EXT_HANDLER(0, NULL)
+ GEN_MLME_EXT_HANDLER(0, NULL)
+ GEN_MLME_EXT_HANDLER(0, NULL)
+ GEN_MLME_EXT_HANDLER(0, NULL) /*40*/
+ GEN_MLME_EXT_HANDLER(0, NULL)
+ GEN_MLME_EXT_HANDLER(0, NULL)
+ GEN_MLME_EXT_HANDLER(0, NULL)
+ GEN_MLME_EXT_HANDLER(0, NULL)
+ GEN_MLME_EXT_HANDLER(sizeof(struct addBaReq_parm), add_ba_hdl)
+ GEN_MLME_EXT_HANDLER(sizeof(struct set_ch_parm), set_ch_hdl) /* 46 */
+ GEN_MLME_EXT_HANDLER(0, NULL)
+ GEN_MLME_EXT_HANDLER(0, NULL)
+ GEN_MLME_EXT_HANDLER(0, NULL)
+ GEN_MLME_EXT_HANDLER(0, NULL) /*50*/
+ GEN_MLME_EXT_HANDLER(0, NULL)
+ GEN_MLME_EXT_HANDLER(0, NULL)
+ GEN_MLME_EXT_HANDLER(0, NULL)
+ GEN_MLME_EXT_HANDLER(0, NULL)
+ GEN_MLME_EXT_HANDLER(sizeof(struct Tx_Beacon_param),
+ tx_beacon_hdl) /*55*/
+
+ GEN_MLME_EXT_HANDLER(0, mlme_evt_hdl) /*56*/
+ GEN_MLME_EXT_HANDLER(0, rtw_drvextra_cmd_hdl) /*57*/
+
+ GEN_MLME_EXT_HANDLER(0, h2c_msg_hdl) /*58*/
+ GEN_MLME_EXT_HANDLER(sizeof(struct SetChannelPlan_param),
+ set_chplan_hdl) /*59*/
+ GEN_MLME_EXT_HANDLER(sizeof(struct LedBlink_param),
+ led_blink_hdl) /*60*/
+
+ GEN_MLME_EXT_HANDLER(sizeof(struct SetChannelSwitch_param),
+ set_csa_hdl) /*61*/
+ GEN_MLME_EXT_HANDLER(sizeof(struct TDLSoption_param),
+ tdls_hdl) /*62*/
+};
+
+#endif
+
+struct C2HEvent_Header {
+#ifdef __LITTLE_ENDIAN
+ unsigned int len:16;
+ unsigned int ID:8;
+ unsigned int seq:8;
+#elif defined(__BIG_ENDIAN)
+ unsigned int seq:8;
+ unsigned int ID:8;
+ unsigned int len:16;
+#endif
+ unsigned int rsvd;
+};
+
+void rtw_dummy_event_callback(struct adapter *adapter, u8 *pbuf);
+void rtw_fwdbg_event_callback(struct adapter *adapter, u8 *pbuf);
+
+enum rtw_c2h_event {
+ GEN_EVT_CODE(_Read_MACREG) = 0, /*0*/
+ GEN_EVT_CODE(_Read_BBREG),
+ GEN_EVT_CODE(_Read_RFREG),
+ GEN_EVT_CODE(_Read_EEPROM),
+ GEN_EVT_CODE(_Read_EFUSE),
+ GEN_EVT_CODE(_Read_CAM), /*5*/
+ GEN_EVT_CODE(_Get_BasicRate),
+ GEN_EVT_CODE(_Get_DataRate),
+ GEN_EVT_CODE(_Survey), /*8*/
+ GEN_EVT_CODE(_SurveyDone), /*9*/
+
+ GEN_EVT_CODE(_JoinBss) , /*10*/
+ GEN_EVT_CODE(_AddSTA),
+ GEN_EVT_CODE(_DelSTA),
+ GEN_EVT_CODE(_AtimDone),
+ GEN_EVT_CODE(_TX_Report),
+ GEN_EVT_CODE(_CCX_Report), /*15*/
+ GEN_EVT_CODE(_DTM_Report),
+ GEN_EVT_CODE(_TX_Rate_Statistics),
+ GEN_EVT_CODE(_C2HLBK),
+ GEN_EVT_CODE(_FWDBG),
+ GEN_EVT_CODE(_C2HFEEDBACK), /*20*/
+ GEN_EVT_CODE(_ADDBA),
+ GEN_EVT_CODE(_C2HBCN),
+ GEN_EVT_CODE(_ReportPwrState), /* filen: only for PCIE, USB */
+ GEN_EVT_CODE(_CloseRF), /* filen: only for PCIE,
+ * work around ASPM */
+ MAX_C2HEVT
+};
+
+#ifdef _RTW_MLME_EXT_C_
+
+static struct fwevent wlanevents[] = {
+ {0, rtw_dummy_event_callback}, /*0*/
+ {0, NULL},
+ {0, NULL},
+ {0, NULL},
+ {0, NULL},
+ {0, NULL},
+ {0, NULL},
+ {0, NULL},
+ {0, &rtw_survey_event_callback}, /*8*/
+ {sizeof (struct surveydone_event), &rtw_surveydone_event_callback},/*9*/
+ {0, &rtw_joinbss_event_callback}, /*10*/
+ {sizeof(struct stassoc_event), &rtw_stassoc_event_callback},
+ {sizeof(struct stadel_event), &rtw_stadel_event_callback},
+ {0, &rtw_atimdone_event_callback},
+ {0, rtw_dummy_event_callback},
+ {0, NULL}, /*15*/
+ {0, NULL},
+ {0, NULL},
+ {0, NULL},
+ {0, rtw_fwdbg_event_callback},
+ {0, NULL}, /*20*/
+ {0, NULL},
+ {0, NULL},
+ {0, &rtw_cpwm_event_callback},
+ {0, NULL},
+};
+
+#endif/* _RTL_MLME_EXT_C_ */
+
+#endif /* __RTW_MLME_EXT_H_ */
diff --git a/drivers/staging/r8188eu/include/rtw_mp.h b/drivers/staging/r8188eu/include/rtw_mp.h
new file mode 100644
index 000000000000..9111e58e0598
--- /dev/null
+++ b/drivers/staging/r8188eu/include/rtw_mp.h
@@ -0,0 +1,492 @@
+/******************************************************************************
+ *
+ * Copyright(c) 2007 - 2011 Realtek Corporation. All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of version 2 of the GNU General Public License as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
+ * more details.
+ *
+ * You should have received a copy of the GNU General Public License along with
+ * this program; if not, write to the Free Software Foundation, Inc.,
+ * 51 Franklin Street, Fifth Floor, Boston, MA 02110, USA
+ *
+ *
+ ******************************************************************************/
+#ifndef _RTW_MP_H_
+#define _RTW_MP_H_
+
+/* 00 - Success */
+/* 11 - Error */
+#define STATUS_SUCCESS (0x00000000L)
+#define STATUS_PENDING (0x00000103L)
+
+#define STATUS_UNSUCCESSFUL (0xC0000001L)
+#define STATUS_INSUFFICIENT_RESOURCES (0xC000009AL)
+#define STATUS_NOT_SUPPORTED (0xC00000BBL)
+
+#define NDIS_STATUS_SUCCESS ((int)STATUS_SUCCESS)
+#define NDIS_STATUS_PENDING ((int)STATUS_PENDING)
+#define NDIS_STATUS_NOT_RECOGNIZED ((int)0x00010001L)
+#define NDIS_STATUS_NOT_COPIED ((int)0x00010002L)
+#define NDIS_STATUS_NOT_ACCEPTED ((int)0x00010003L)
+#define NDIS_STATUS_CALL_ACTIVE ((int)0x00010007L)
+
+#define NDIS_STATUS_FAILURE ((int)STATUS_UNSUCCESSFUL)
+#define NDIS_STATUS_RESOURCES ((int)STATUS_INSUFFICIENT_RESOURCES)
+#define NDIS_STATUS_CLOSING ((int)0xC0010002L)
+#define NDIS_STATUS_BAD_VERSION ((int)0xC0010004L)
+#define NDIS_STATUS_BAD_CHARACTERISTICS ((int)0xC0010005L)
+#define NDIS_STATUS_ADAPTER_NOT_FOUND ((int)0xC0010006L)
+#define NDIS_STATUS_OPEN_FAILED ((int)0xC0010007L)
+#define NDIS_STATUS_DEVICE_FAILED ((int)0xC0010008L)
+#define NDIS_STATUS_MULTICAST_FULL ((int)0xC0010009L)
+#define NDIS_STATUS_MULTICAST_EXISTS ((int)0xC001000AL)
+#define NDIS_STATUS_MULTICAST_NOT_FOUND ((int)0xC001000BL)
+#define NDIS_STATUS_REQUEST_ABORTED ((int)0xC001000CL)
+#define NDIS_STATUS_RESET_IN_PROGRESS ((int)0xC001000DL)
+#define NDIS_STATUS_CLOSING_INDICATING ((int)0xC001000EL)
+#define NDIS_STATUS_NOT_SUPPORTED ((int)STATUS_NOT_SUPPORTED)
+#define NDIS_STATUS_INVALID_PACKET ((int)0xC001000FL)
+#define NDIS_STATUS_OPEN_LIST_FULL ((int)0xC0010010L)
+#define NDIS_STATUS_ADAPTER_NOT_READY ((int)0xC0010011L)
+#define NDIS_STATUS_ADAPTER_NOT_OPEN ((int)0xC0010012L)
+#define NDIS_STATUS_NOT_INDICATING ((int)0xC0010013L)
+#define NDIS_STATUS_INVALID_LENGTH ((int)0xC0010014L)
+#define NDIS_STATUS_INVALID_DATA ((int)0xC0010015L)
+#define NDIS_STATUS_BUFFER_TOO_SHORT ((int)0xC0010016L)
+#define NDIS_STATUS_INVALID_OID ((int)0xC0010017L)
+#define NDIS_STATUS_ADAPTER_REMOVED ((int)0xC0010018L)
+#define NDIS_STATUS_UNSUPPORTED_MEDIA ((int)0xC0010019L)
+#define NDIS_STATUS_GROUP_ADDRESS_IN_USE ((int)0xC001001AL)
+#define NDIS_STATUS_FILE_NOT_FOUND ((int)0xC001001BL)
+#define NDIS_STATUS_ERROR_READING_FILE ((int)0xC001001CL)
+#define NDIS_STATUS_ALREADY_MAPPED ((int)0xC001001DL)
+#define NDIS_STATUS_RESOURCE_CONFLICT ((int)0xC001001EL)
+#define NDIS_STATUS_NO_CABLE ((int)0xC001001FL)
+
+#define NDIS_STATUS_INVALID_SAP ((int)0xC0010020L)
+#define NDIS_STATUS_SAP_IN_USE ((int)0xC0010021L)
+#define NDIS_STATUS_INVALID_ADDRESS ((int)0xC0010022L)
+#define NDIS_STATUS_VC_NOT_ACTIVATED ((int)0xC0010023L)
+#define NDIS_STATUS_DEST_OUT_OF_ORDER ((int)0xC0010024L) /*cause 27*/
+#define NDIS_STATUS_VC_NOT_AVAILABLE ((int)0xC0010025L) /*cause 35,45 */
+#define NDIS_STATUS_CELLRATE_NOT_AVAILABLE ((int)0xC0010026L) /*cause 37*/
+#define NDIS_STATUS_INCOMPATABLE_QOS ((int)0xC0010027L) /*cause 49*/
+#define NDIS_STATUS_AAL_PARAMS_UNSUPPORTED ((int)0xC0010028L) /*cause 93*/
+#define NDIS_STATUS_NO_ROUTE_TO_DESTINATION ((int)0xC0010029L) /*cause 3 */
+
+enum antenna_path {
+ ANTENNA_NONE = 0x00,
+ ANTENNA_D,
+ ANTENNA_C,
+ ANTENNA_CD,
+ ANTENNA_B,
+ ANTENNA_BD,
+ ANTENNA_BC,
+ ANTENNA_BCD,
+ ANTENNA_A,
+ ANTENNA_AD,
+ ANTENNA_AC,
+ ANTENNA_ACD,
+ ANTENNA_AB,
+ ANTENNA_ABD,
+ ANTENNA_ABC,
+ ANTENNA_ABCD
+};
+
+#define MAX_MP_XMITBUF_SZ 2048
+#define NR_MP_XMITFRAME 8
+
+struct mp_xmit_frame {
+ struct list_head list;
+ struct pkt_attrib attrib;
+ struct sk_buff *pkt;
+ int frame_tag;
+ struct adapter *padapter;
+ struct urb *pxmit_urb[8];
+ /* insert urb, irp, and irpcnt info below... */
+ u8 *mem_addr;
+ u32 sz[8];
+ u8 bpending[8];
+ int ac_tag[8];
+ int last[8];
+ uint irpcnt;
+ uint fragcnt;
+ uint mem[(MAX_MP_XMITBUF_SZ >> 2)];
+};
+
+struct mp_wiparam {
+ u32 bcompleted;
+ u32 act_type;
+ u32 io_offset;
+ u32 io_value;
+};
+
+typedef void(*wi_act_func)(void *padapter);
+
+struct mp_tx {
+ u8 stop;
+ u32 count, sended;
+ u8 payload;
+ struct pkt_attrib attrib;
+ struct tx_desc desc;
+ u8 *pallocated_buf;
+ u8 *buf;
+ u32 buf_size, write_size;
+ void *PktTxThread;
+};
+
+#include <Hal8188EPhyCfg.h>
+
+#define MP_MAX_LINES 1000
+#define MP_MAX_LINES_BYTES 256
+
+typedef void (*MPT_WORK_ITEM_HANDLER)(void *Adapter);
+
+struct mpt_context {
+ /* Indicate if we have started Mass Production Test. */
+ bool bMassProdTest;
+
+ /* Indicate if the driver is unloading or unloaded. */
+ bool bMptDrvUnload;
+
+ struct semaphore MPh2c_Sema;
+ struct timer_list MPh2c_timeout_timer;
+/* Event used to sync H2c for BT control */
+
+ bool MptH2cRspEvent;
+ bool MptBtC2hEvent;
+ bool bMPh2c_timeout;
+
+ /* 8190 PCI does not support NDIS_WORK_ITEM. */
+ /* Work Item for Mass Production Test. */
+ /* Event used to sync the case unloading driver and MptWorkItem
+ * is still in progress. */
+ /* Indicate a MptWorkItem is scheduled and not yet finished. */
+ bool bMptWorkItemInProgress;
+ /* An instance which implements function and context of MptWorkItem. */
+ MPT_WORK_ITEM_HANDLER CurrMptAct;
+
+ /* 1=Start, 0=Stop from UI. */
+ u32 MptTestStart;
+ /* _TEST_MODE, defined in MPT_Req2.h */
+ u32 MptTestItem;
+ /* Variable needed in each implementation of CurrMptAct. */
+ u32 MptActType; /* Type of action performed in CurrMptAct. */
+ /* The Offset of IO operation is depend of MptActType. */
+ u32 MptIoOffset;
+ /* The Value of IO operation is depend of MptActType. */
+ u32 MptIoValue;
+ /* The RfPath of IO operation is depend of MptActType. */
+ u32 MptRfPath;
+
+ enum wireless_mode MptWirelessModeToSw; /* Wireless mode to switch. */
+ u8 MptChannelToSw; /* Channel to switch. */
+ u8 MptInitGainToSet; /* Initial gain to set. */
+ u32 MptBandWidth; /* bandwidth to switch. */
+ u32 MptRateIndex; /* rate index. */
+ /* Register value kept for Single Carrier Tx test. */
+ u8 btMpCckTxPower;
+ /* Register value kept for Single Carrier Tx test. */
+ u8 btMpOfdmTxPower;
+ /* For MP Tx Power index */
+ u8 TxPwrLevel[2]; /* rf-A, rf-B */
+
+ /* Content of RCR Regsiter for Mass Production Test. */
+ u32 MptRCR;
+ /* true if we only receive packets with specific pattern. */
+ bool bMptFilterPattern;
+ /* Rx OK count, statistics used in Mass Production Test. */
+ u32 MptRxOkCnt;
+ /* Rx CRC32 error count, statistics used in Mass Production Test. */
+ u32 MptRxCrcErrCnt;
+
+ bool bCckContTx; /* true if we are in CCK Continuous Tx test. */
+ bool bOfdmContTx; /* true if we are in OFDM Continuous Tx test. */
+ bool bStartContTx; /* true if we have start Continuous Tx test. */
+ /* true if we are in Single Carrier Tx test. */
+ bool bSingleCarrier;
+ /* true if we are in Carrier Suppression Tx Test. */
+ bool bCarrierSuppression;
+ /* true if we are in Single Tone Tx test. */
+ bool bSingleTone;
+
+ /* ACK counter asked by K.Y.. */
+ bool bMptEnableAckCounter;
+ u32 MptAckCounter;
+
+ u8 APK_bound[2]; /* for APK path A/path B */
+ bool bMptIndexEven;
+
+ u8 backup0xc50;
+ u8 backup0xc58;
+ u8 backup0xc30;
+ u8 backup0x52_RF_A;
+ u8 backup0x52_RF_B;
+
+ u8 h2cReqNum;
+ u8 c2hBuf[20];
+
+ u8 btInBuf[100];
+ u32 mptOutLen;
+ u8 mptOutBuf[100];
+};
+
+enum {
+ WRITE_REG = 1,
+ READ_REG,
+ WRITE_RF,
+ READ_RF,
+ MP_START,
+ MP_STOP,
+ MP_RATE,
+ MP_CHANNEL,
+ MP_BANDWIDTH,
+ MP_TXPOWER,
+ MP_ANT_TX,
+ MP_ANT_RX,
+ MP_CTX,
+ MP_QUERY,
+ MP_ARX,
+ MP_PSD,
+ MP_PWRTRK,
+ MP_THER,
+ MP_IOCTL,
+ EFUSE_GET,
+ EFUSE_SET,
+ MP_RESET_STATS,
+ MP_DUMP,
+ MP_PHYPARA,
+ MP_SetRFPathSwh,
+ MP_QueryDrvStats,
+ MP_SetBT,
+ CTA_TEST,
+ MP_NULL,
+};
+
+struct mp_priv {
+ struct adapter *papdater;
+
+ /* Testing Flag */
+ /* 0 for normal type packet, 1 for loopback packet (16bytes TXCMD) */
+ u32 mode;
+
+ u32 prev_fw_state;
+
+ /* OID cmd handler */
+ struct mp_wiparam workparam;
+
+ /* Tx Section */
+ u8 TID;
+ u32 tx_pktcount;
+ struct mp_tx tx;
+
+ /* Rx Section */
+ u32 rx_pktcount;
+ u32 rx_crcerrpktcount;
+ u32 rx_pktloss;
+
+ struct recv_stat rxstat;
+
+ /* RF/BB relative */
+ u8 channel;
+ u8 bandwidth;
+ u8 prime_channel_offset;
+ u8 txpoweridx;
+ u8 txpoweridx_b;
+ u8 rateidx;
+ u32 preamble;
+ u32 CrystalCap;
+
+ u16 antenna_tx;
+ u16 antenna_rx;
+
+ u8 check_mp_pkt;
+
+ u8 bSetTxPower;
+
+ struct wlan_network mp_network;
+ unsigned char network_macaddr[ETH_ALEN];
+
+ u8 *pallocated_mp_xmitframe_buf;
+ u8 *pmp_xmtframe_buf;
+ struct __queue free_mp_xmitqueue;
+ u32 free_mp_xmitframe_cnt;
+
+ struct mpt_context MptCtx;
+};
+
+struct iocmd_struct {
+ u8 cmdclass;
+ u16 value;
+ u8 index;
+};
+
+struct rf_reg_param {
+ u32 path;
+ u32 offset;
+ u32 value;
+};
+
+struct bb_reg_param {
+ u32 offset;
+ u32 value;
+};
+/* */
+
+#define LOWER true
+#define RAISE false
+
+/* Hardware Registers */
+#define BB_REG_BASE_ADDR 0x800
+
+/* MP variables */
+enum mp_mode_{
+ MP_OFF,
+ MP_ON,
+ MP_ERR,
+ MP_CONTINUOUS_TX,
+ MP_SINGLE_CARRIER_TX,
+ MP_CARRIER_SUPPRISSION_TX,
+ MP_SINGLE_TONE_TX,
+ MP_PACKET_TX,
+ MP_PACKET_RX
+};
+
+extern u8 mpdatarate[NumRates];
+
+/* MP set force data rate base on the definition. */
+enum mpt_rate_index {
+ /* CCK rate. */
+ MPT_RATE_1M, /* 0 */
+ MPT_RATE_2M,
+ MPT_RATE_55M,
+ MPT_RATE_11M, /* 3 */
+
+ /* OFDM rate. */
+ MPT_RATE_6M, /* 4 */
+ MPT_RATE_9M,
+ MPT_RATE_12M,
+ MPT_RATE_18M,
+ MPT_RATE_24M,
+ MPT_RATE_36M,
+ MPT_RATE_48M,
+ MPT_RATE_54M, /* 11 */
+
+ /* HT rate. */
+ MPT_RATE_MCS0, /* 12 */
+ MPT_RATE_MCS1,
+ MPT_RATE_MCS2,
+ MPT_RATE_MCS3,
+ MPT_RATE_MCS4,
+ MPT_RATE_MCS5,
+ MPT_RATE_MCS6,
+ MPT_RATE_MCS7, /* 19 */
+ MPT_RATE_MCS8,
+ MPT_RATE_MCS9,
+ MPT_RATE_MCS10,
+ MPT_RATE_MCS11,
+ MPT_RATE_MCS12,
+ MPT_RATE_MCS13,
+ MPT_RATE_MCS14,
+ MPT_RATE_MCS15, /* 27 */
+ MPT_RATE_LAST
+};
+
+#define MAX_TX_PWR_INDEX_N_MODE 64 /* 0x3F */
+
+enum power_mode {
+ POWER_LOW = 0,
+ POWER_NORMAL
+};
+
+#define RX_PKT_BROADCAST 1
+#define RX_PKT_DEST_ADDR 2
+#define RX_PKT_PHY_MATCH 3
+
+enum encry_ctrl_state {
+ HW_CONTROL, /* hw encryption& decryption */
+ SW_CONTROL, /* sw encryption& decryption */
+ HW_ENCRY_SW_DECRY, /* hw encryption & sw decryption */
+ SW_ENCRY_HW_DECRY /* sw encryption & hw decryption */
+};
+
+s32 init_mp_priv(struct adapter *padapter);
+void free_mp_priv(struct mp_priv *pmp_priv);
+s32 MPT_InitializeAdapter(struct adapter *padapter, u8 Channel);
+void MPT_DeInitAdapter(struct adapter *padapter);
+s32 mp_start_test(struct adapter *padapter);
+void mp_stop_test(struct adapter *padapter);
+
+u32 _read_rfreg(struct adapter *padapter, u8 rfpath, u32 addr, u32 bitmask);
+void _write_rfreg(struct adapter *padapter, u8 rfpath, u32 addr, u32 bitmask, u32 val);
+
+u32 read_macreg(struct adapter *padapter, u32 addr, u32 sz);
+void write_macreg(struct adapter *padapter, u32 addr, u32 val, u32 sz);
+u32 read_bbreg(struct adapter *padapter, u32 addr, u32 bitmask);
+void write_bbreg(struct adapter *padapter, u32 addr, u32 bitmask, u32 val);
+u32 read_rfreg(struct adapter *padapter, u8 rfpath, u32 addr);
+void write_rfreg(struct adapter *padapter, u8 rfpath, u32 addr, u32 val);
+
+void SetChannel(struct adapter *pAdapter);
+void SetBandwidth(struct adapter *pAdapter);
+void SetTxPower(struct adapter *pAdapter);
+void SetAntennaPathPower(struct adapter *pAdapter);
+void SetDataRate(struct adapter *pAdapter);
+
+void SetAntenna(struct adapter *pAdapter);
+
+s32 SetThermalMeter(struct adapter *pAdapter, u8 target_ther);
+void GetThermalMeter(struct adapter *pAdapter, u8 *value);
+
+void SetContinuousTx(struct adapter *pAdapter, u8 bStart);
+void SetSingleCarrierTx(struct adapter *pAdapter, u8 bStart);
+void SetSingleToneTx(struct adapter *pAdapter, u8 bStart);
+void SetCarrierSuppressionTx(struct adapter *pAdapter, u8 bStart);
+void PhySetTxPowerLevel(struct adapter *pAdapter);
+
+void fill_txdesc_for_mp(struct adapter *padapter, struct tx_desc *ptxdesc);
+void SetPacketTx(struct adapter *padapter);
+void SetPacketRx(struct adapter *pAdapter, u8 bStartRx);
+
+void ResetPhyRxPktCount(struct adapter *pAdapter);
+u32 GetPhyRxPktReceived(struct adapter *pAdapter);
+u32 GetPhyRxPktCRC32Error(struct adapter *pAdapter);
+
+s32 SetPowerTracking(struct adapter *padapter, u8 enable);
+void GetPowerTracking(struct adapter *padapter, u8 *enable);
+u32 mp_query_psd(struct adapter *pAdapter, u8 *data);
+void Hal_SetAntenna(struct adapter *pAdapter);
+void Hal_SetBandwidth(struct adapter *pAdapter);
+void Hal_SetTxPower(struct adapter *pAdapter);
+void Hal_SetCarrierSuppressionTx(struct adapter *pAdapter, u8 bStart);
+void Hal_SetSingleToneTx(struct adapter *pAdapter, u8 bStart);
+void Hal_SetSingleCarrierTx (struct adapter *pAdapter, u8 bStart);
+void Hal_SetContinuousTx (struct adapter *pAdapter, u8 bStart);
+void Hal_SetBandwidth(struct adapter *pAdapter);
+void Hal_SetDataRate(struct adapter *pAdapter);
+void Hal_SetChannel(struct adapter *pAdapter);
+void Hal_SetAntennaPathPower(struct adapter *pAdapter);
+s32 Hal_SetThermalMeter(struct adapter *pAdapter, u8 target_ther);
+s32 Hal_SetPowerTracking(struct adapter *padapter, u8 enable);
+void Hal_GetPowerTracking(struct adapter *padapter, u8 * enable);
+void Hal_GetThermalMeter(struct adapter *pAdapter, u8 *value);
+void Hal_mpt_SwitchRfSetting(struct adapter *pAdapter);
+void Hal_MPT_CCKTxPowerAdjust(struct adapter * Adapter, bool bInCH14);
+void Hal_MPT_CCKTxPowerAdjustbyIndex(struct adapter *pAdapter, bool beven);
+void Hal_SetCCKTxPower(struct adapter *pAdapter, u8 * TxPower);
+void Hal_SetOFDMTxPower(struct adapter *pAdapter, u8 * TxPower);
+void Hal_TriggerRFThermalMeter(struct adapter *pAdapter);
+u8 Hal_ReadRFThermalMeter(struct adapter *pAdapter);
+void Hal_SetCCKContinuousTx(struct adapter *pAdapter, u8 bStart);
+void Hal_SetOFDMContinuousTx(struct adapter *pAdapter, u8 bStart);
+void Hal_ProSetCrystalCap (struct adapter *pAdapter , u32 CrystalCapVal);
+void _rtw_mp_xmit_priv(struct xmit_priv *pxmitpriv);
+void MP_PHY_SetRFPathSwitch(struct adapter *pAdapter ,bool bMain);
+
+#endif /* _RTW_MP_H_ */
diff --git a/drivers/staging/r8188eu/include/rtw_mp_ioctl.h b/drivers/staging/r8188eu/include/rtw_mp_ioctl.h
new file mode 100644
index 000000000000..12835e448d80
--- /dev/null
+++ b/drivers/staging/r8188eu/include/rtw_mp_ioctl.h
@@ -0,0 +1,339 @@
+/******************************************************************************
+ *
+ * Copyright(c) 2007 - 2011 Realtek Corporation. All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of version 2 of the GNU General Public License as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
+ * more details.
+ *
+ * You should have received a copy of the GNU General Public License along with
+ * this program; if not, write to the Free Software Foundation, Inc.,
+ * 51 Franklin Street, Fifth Floor, Boston, MA 02110, USA
+ *
+ *
+ ******************************************************************************/
+#ifndef _RTW_MP_IOCTL_H_
+#define _RTW_MP_IOCTL_H_
+
+#include <drv_types.h>
+#include <mp_custom_oid.h>
+#include <rtw_ioctl.h>
+#include <rtw_ioctl_rtl.h>
+#include <rtw_efuse.h>
+#include <rtw_mp.h>
+
+/* */
+struct cfg_dbg_msg_struct {
+ u32 DebugLevel;
+ u32 DebugComponent_H32;
+ u32 DebugComponent_L32;
+};
+
+struct mp_rw_reg {
+ u32 offset;
+ u32 width;
+ u32 value;
+};
+
+struct efuse_access_struct {
+ u16 start_addr;
+ u16 cnts;
+ u8 data[0];
+};
+
+struct burst_rw_reg {
+ u32 offset;
+ u32 len;
+ u8 Data[256];
+};
+
+struct usb_vendor_req {
+ u8 bRequest;
+ u16 wValue;
+ u16 wIndex;
+ u16 wLength;
+ u8 u8Dir;/* 0:OUT, 1:IN */
+ u8 u8InData;
+};
+
+struct dr_variable_struct {
+ u8 offset;
+ u32 variable;
+};
+
+#define _irqlevel_changed_(a, b)
+
+/* rtl8188eu_oid_rtl_seg_81_80_00 */
+int rtl8188eu_oid_rt_pro_set_data_rate_hdl(struct oid_par_priv *poid_par_priv);
+int rtl8188eu_oid_rt_pro_start_test_hdl(struct oid_par_priv *poid_par_priv);
+int rtl8188eu_oid_rt_pro_stop_test_hdl(struct oid_par_priv *poid_par_priv);
+int rtl8188eu_oid_rt_pro_set_channel_direct_call_hdl(struct oid_par_priv *poid_par_priv);
+int rtl8188eu_oid_rt_pro_set_antenna_bb_hdl(struct oid_par_priv *poid_par_priv);
+int rtl8188eu_oid_rt_pro_set_tx_power_control_hdl(struct oid_par_priv *poid_par_priv);
+
+/* rtl8188eu_oid_rtl_seg_81_80_20 */
+int rtl8188eu_oid_rt_pro_query_tx_packet_sent_hdl(struct oid_par_priv *poid_par_priv);
+int rtl8188eu_oid_rt_pro_query_rx_packet_received_hdl(struct oid_par_priv *poid_par_priv);
+int rtl8188eu_oid_rt_pro_query_rx_packet_crc32_error_hdl(struct oid_par_priv *par_priv);
+int rtl8188eu_oid_rt_pro_reset_tx_packet_sent_hdl(struct oid_par_priv *poid_par_priv);
+int rtl8188eu_oid_rt_pro_reset_rx_packet_received_hdl(struct oid_par_priv *par_priv);
+int rtl8188eu_oid_rt_pro_set_modulation_hdl(struct oid_par_priv *poid_par_priv);
+int rtl8188eu_oid_rt_pro_set_continuous_tx_hdl(struct oid_par_priv *poid_par_priv);
+int rtl8188eu_oid_rt_pro_set_single_carrier_tx_hdl(struct oid_par_priv *poid_par_priv);
+int rtl8188eu_oid_rt_pro_set_carrier_suppression_tx_hdl(struct oid_par_priv *par_priv);
+int rtl8188eu_oid_rt_pro_set_single_tone_tx_hdl(struct oid_par_priv *poid_par_priv);
+
+/* rtl8188eu_oid_rtl_seg_81_87 */
+int rtl8188eu_oid_rt_pro_write_bb_reg_hdl(struct oid_par_priv *poid_par_priv);
+int rtl8188eu_oid_rt_pro_read_bb_reg_hdl(struct oid_par_priv *poid_par_priv);
+int rtl8188eu_oid_rt_pro_write_rf_reg_hdl(struct oid_par_priv *poid_par_priv);
+int rtl8188eu_oid_rt_pro_read_rf_reg_hdl(struct oid_par_priv *poid_par_priv);
+
+/* rtl8188eu_oid_rtl_seg_81_85 */
+int rtl8188eu_oid_rt_wireless_mode_hdl(struct oid_par_priv *poid_par_priv);
+
+/* rtl8188eu_oid_rtl_seg_87_11_00 */
+int rtl8188eu_oid_rt_pro8711_join_bss_hdl(struct oid_par_priv *poid_par_priv);
+int rtl8188eu_oid_rt_pro_read_register_hdl(struct oid_par_priv *poid_par_priv);
+int rtl8188eu_oid_rt_pro_write_register_hdl(struct oid_par_priv *poid_par_priv);
+int rtl8188eu_oid_rt_pro_burst_read_register_hdl(struct oid_par_priv *poid_par_priv);
+int rtl8188eu_oid_rt_pro_burst_write_register_hdl(struct oid_par_priv *poid_par_priv);
+int rtl8188eu_oid_rt_pro_write_txcmd_hdl(struct oid_par_priv *poid_par_priv);
+int rtl8188eu_oid_rt_pro_read16_eeprom_hdl(struct oid_par_priv *poid_par_priv);
+int rtl8188eu_oid_rt_pro_write16_eeprom_hdl(struct oid_par_priv *poid_par_priv);
+int rtl8188eu_oid_rt_pro8711_wi_poll_hdl(struct oid_par_priv *poid_par_priv);
+int rtl8188eu_oid_rt_pro8711_pkt_loss_hdl(struct oid_par_priv *poid_par_priv);
+int rtl8188eu_oid_rt_rd_attrib_mem_hdl(struct oid_par_priv *poid_par_priv);
+int rtl8188eu_oid_rt_wr_attrib_mem_hdl (struct oid_par_priv *poid_par_priv);
+int rtl8188eu_oid_rt_pro_set_rf_intfs_hdl(struct oid_par_priv *poid_par_priv);
+int rtl8188eu_oid_rt_poll_rx_status_hdl(struct oid_par_priv *poid_par_priv);
+/* rtl8188eu_oid_rtl_seg_87_11_20 */
+int rtl8188eu_oid_rt_pro_cfg_debug_message_hdl(struct oid_par_priv *poid_par_priv);
+int rtl8188eu_oid_rt_pro_set_data_rate_ex_hdl(struct oid_par_priv *poid_par_priv);
+int rtl8188eu_oid_rt_pro_set_basic_rate_hdl(struct oid_par_priv *poid_par_priv);
+int rtl8188eu_oid_rt_pro_read_tssi_hdl(struct oid_par_priv *poid_par_priv);
+int rtl8188eu_oid_rt_pro_set_power_tracking_hdl(struct oid_par_priv *poid_par_priv);
+/* rtl8188eu_oid_rtl_seg_87_11_50 */
+int rtl8188eu_oid_rt_pro_qry_pwrstate_hdl(struct oid_par_priv *poid_par_priv);
+int rtl8188eu_oid_rt_pro_set_pwrstate_hdl(struct oid_par_priv *poid_par_priv);
+/* rtl8188eu_oid_rtl_seg_87_11_F0 */
+int rtl8188eu_oid_rt_pro_h2c_set_rate_table_hdl(struct oid_par_priv *poid_par_priv);
+int rtl8188eu_oid_rt_pro_h2c_get_rate_table_hdl(struct oid_par_priv *poid_par_priv);
+
+/* rtl8188eu_oid_rtl_seg_87_12_00 */
+int rtl8188eu_oid_rt_pro_encryption_ctrl_hdl(struct oid_par_priv *poid_par_priv);
+int rtl8188eu_oid_rt_pro_add_sta_info_hdl(struct oid_par_priv *poid_par_priv);
+int rtl8188eu_oid_rt_pro_dele_sta_info_hdl(struct oid_par_priv *poid_par_priv);
+int rtl8188eu_oid_rt_pro_query_dr_variable_hdl(struct oid_par_priv *poid_par_priv);
+int rtl8188eu_oid_rt_pro_rx_packet_type_hdl(struct oid_par_priv *poid_par_priv);
+int rtl8188eu_oid_rt_pro_read_efuse_hdl(struct oid_par_priv *poid_par_priv);
+int rtl8188eu_oid_rt_pro_write_efuse_hdl(struct oid_par_priv *poid_par_priv);
+int rtl8188eu_oid_rt_pro_rw_efuse_pgpkt_hdl(struct oid_par_priv *poid_par_priv);
+int rtl8188eu_oid_rt_get_efuse_current_size_hdl(struct oid_par_priv *poid_par_priv);
+int rtl8188eu_oid_rt_pro_efuse_hdl(struct oid_par_priv *poid_par_priv);
+int rtl8188eu_oid_rt_pro_efuse_map_hdl(struct oid_par_priv *poid_par_priv);
+int rtl8188eu_oid_rt_set_bandwidth_hdl(struct oid_par_priv *poid_par_priv);
+int rtl8188eu_oid_rt_set_crystal_cap_hdl(struct oid_par_priv *poid_par_priv);
+int rtl8188eu_oid_rt_set_rx_packet_type_hdl(struct oid_par_priv *poid_par_priv);
+int rtl8188eu_oid_rt_get_efuse_max_size_hdl(struct oid_par_priv *poid_par_priv);
+int rtl8188eu_oid_rt_pro_set_tx_agc_offset_hdl(struct oid_par_priv *poid_par_priv);
+int rtl8188eu_oid_rt_pro_set_pkt_test_mode_hdl(struct oid_par_priv *poid_par_priv);
+int rtl8188eu_oid_rt_get_thermal_meter_hdl(struct oid_par_priv *poid_par_priv);
+int rtl8188eu_oid_rt_reset_phy_rx_packet_count_hdl(struct oid_par_priv *poid_par_priv);
+int rtl8188eu_oid_rt_get_phy_rx_packet_received_hdl(struct oid_par_priv *poid_par_priv);
+int rtl8188eu_oid_rt_get_phy_rx_packet_crc32_error_hdl(struct oid_par_priv *par_priv);
+int rtl8188eu_oid_rt_set_power_down_hdl(struct oid_par_priv *poid_par_priv);
+int rtl8188eu_oid_rt_get_power_mode_hdl(struct oid_par_priv *poid_par_priv);
+int rtl8188eu_oid_rt_pro_trigger_gpio_hdl(struct oid_par_priv *poid_par_priv);
+
+#ifdef _RTW_MP_IOCTL_C_
+
+static const struct oid_obj_priv rtl8188eu_oid_rtl_seg_81_80_00[] = {
+ {1, &oid_null_function}, /* 0x00 OID_RT_PRO_RESET_DUT */
+ {1, &rtl8188eu_oid_rt_pro_set_data_rate_hdl}, /* 0x01 */
+ {1, &rtl8188eu_oid_rt_pro_start_test_hdl}, /* 0x02 */
+ {1, &rtl8188eu_oid_rt_pro_stop_test_hdl}, /* 0x03 */
+ {1, &oid_null_function}, /* 0x04 OID_RT_PRO_SET_PREAMBLE */
+ {1, &oid_null_function}, /* 0x05 OID_RT_PRO_SET_SCRAMBLER */
+ {1, &oid_null_function}, /* 0x06 OID_RT_PRO_SET_FILTER_BB */
+ {1, &oid_null_function},/* 0x07 OID_RT_PRO_SET_MANUAL_DIVERSITY_BB */
+ {1, &rtl8188eu_oid_rt_pro_set_channel_direct_call_hdl}, /* 0x08 */
+ {1, &oid_null_function},/* 0x09 OID_RT_PRO_SET_SLEEP_MODE_DIRECT_CALL */
+ {1, &oid_null_function},/* 0x0A OID_RT_PRO_SET_WAKE_MODE_DIRECT_CALL */
+ {1, &rtl8188eu_oid_rt_pro_set_continuous_tx_hdl}, /* 0x0B OID_RT_PRO_SET_TX_CONTINUOUS_DIRECT_CALL */
+ {1, &rtl8188eu_oid_rt_pro_set_single_carrier_tx_hdl},/* 0x0C OID_RT_PRO_SET_SINGLE_CARRIER_TX_CONTINUOUS */
+ {1, &oid_null_function}, /* 0x0D OID_RT_PRO_SET_TX_ANTENNA_BB */
+ {1, &rtl8188eu_oid_rt_pro_set_antenna_bb_hdl}, /* 0x0E */
+ {1, &oid_null_function}, /* 0x0F OID_RT_PRO_SET_CR_SCRAMBLER */
+ {1, &oid_null_function}, /* 0x10 OID_RT_PRO_SET_CR_NEW_FILTER */
+ {1, &rtl8188eu_oid_rt_pro_set_tx_power_control_hdl},/* 0x11 OID_RT_PRO_SET_TX_POWER_CONTROL */
+ {1, &oid_null_function}, /* 0x12 OID_RT_PRO_SET_CR_TX_CONFIG */
+ {1, &oid_null_function}, /* 0x13 OID_RT_PRO_GET_TX_POWER_CONTROL */
+ {1, &oid_null_function}, /* 0x14 OID_RT_PRO_GET_CR_SIGNAL_QUALITY */
+ {1, &oid_null_function}, /* 0x15 OID_RT_PRO_SET_CR_SETPOINT */
+ {1, &oid_null_function}, /* 0x16 OID_RT_PRO_SET_INTEGRATOR */
+ {1, &oid_null_function}, /* 0x17 OID_RT_PRO_SET_SIGNAL_QUALITY */
+ {1, &oid_null_function}, /* 0x18 OID_RT_PRO_GET_INTEGRATOR */
+ {1, &oid_null_function}, /* 0x19 OID_RT_PRO_GET_SIGNAL_QUALITY */
+ {1, &oid_null_function}, /* 0x1A OID_RT_PRO_QUERY_EEPROM_TYPE */
+ {1, &oid_null_function}, /* 0x1B OID_RT_PRO_WRITE_MAC_ADDRESS */
+ {1, &oid_null_function}, /* 0x1C OID_RT_PRO_READ_MAC_ADDRESS */
+ {1, &oid_null_function}, /* 0x1D OID_RT_PRO_WRITE_CIS_DATA */
+ {1, &oid_null_function}, /* 0x1E OID_RT_PRO_READ_CIS_DATA */
+ {1, &oid_null_function} /* 0x1F OID_RT_PRO_WRITE_POWER_CONTROL */
+};
+
+static const struct oid_obj_priv rtl8188eu_oid_rtl_seg_81_80_20[] = {
+ {1, &oid_null_function}, /* 0x20 OID_RT_PRO_READ_POWER_CONTROL */
+ {1, &oid_null_function}, /* 0x21 OID_RT_PRO_WRITE_EEPROM */
+ {1, &oid_null_function}, /* 0x22 OID_RT_PRO_READ_EEPROM */
+ {1, &rtl8188eu_oid_rt_pro_reset_tx_packet_sent_hdl}, /* 0x23 */
+ {1, &rtl8188eu_oid_rt_pro_query_tx_packet_sent_hdl}, /* 0x24 */
+ {1, &rtl8188eu_oid_rt_pro_reset_rx_packet_received_hdl}, /* 0x25 */
+ {1, &rtl8188eu_oid_rt_pro_query_rx_packet_received_hdl}, /* 0x26 */
+ {1, &rtl8188eu_oid_rt_pro_query_rx_packet_crc32_error_hdl}, /* 0x27 */
+ {1, &oid_null_function}, /* 0x28 OID_RT_PRO_QUERY_CURRENT_ADDRESS */
+ {1, &oid_null_function}, /* 0x29 OID_RT_PRO_QUERY_PERMANENT_ADDRESS */
+ {1, &oid_null_function}, /* 0x2A OID_RT_PRO_SET_PHILIPS_RF_PARAMETERS */
+ {1, &rtl8188eu_oid_rt_pro_set_carrier_suppression_tx_hdl},/* 0x2B OID_RT_PRO_SET_CARRIER_SUPPRESSION_TX */
+ {1, &oid_null_function}, /* 0x2C OID_RT_PRO_RECEIVE_PACKET */
+ {1, &oid_null_function}, /* 0x2D OID_RT_PRO_WRITE_EEPROM_BYTE */
+ {1, &oid_null_function}, /* 0x2E OID_RT_PRO_READ_EEPROM_BYTE */
+ {1, &rtl8188eu_oid_rt_pro_set_modulation_hdl} /* 0x2F */
+};
+
+static const struct oid_obj_priv rtl8188eu_oid_rtl_seg_81_80_40[] = {
+ {1, &oid_null_function}, /* 0x40 */
+ {1, &oid_null_function}, /* 0x41 */
+ {1, &oid_null_function}, /* 0x42 */
+ {1, &rtl8188eu_oid_rt_pro_set_single_tone_tx_hdl}, /* 0x43 */
+ {1, &oid_null_function}, /* 0x44 */
+ {1, &oid_null_function} /* 0x45 */
+};
+
+static const struct oid_obj_priv rtl8188eu_oid_rtl_seg_81_80_80[] = {
+ {1, &oid_null_function}, /* 0x80 OID_RT_DRIVER_OPTION */
+ {1, &oid_null_function}, /* 0x81 OID_RT_RF_OFF */
+ {1, &oid_null_function} /* 0x82 OID_RT_AUTH_STATUS */
+};
+
+static const struct oid_obj_priv rtl8188eu_oid_rtl_seg_81_85[] = {
+ {1, &rtl8188eu_oid_rt_wireless_mode_hdl} /* 0x00 OID_RT_WIRELESS_MODE */
+};
+
+#endif /* _RTL871X_MP_IOCTL_C_ */
+
+struct rwreg_param {
+ u32 offset;
+ u32 width;
+ u32 value;
+};
+
+struct bbreg_param {
+ u32 offset;
+ u32 phymask;
+ u32 value;
+};
+
+struct txpower_param {
+ u32 pwr_index;
+};
+
+struct datarate_param {
+ u32 rate_index;
+};
+
+struct rfintfs_parm {
+ u32 rfintfs;
+};
+
+struct mp_xmit_parm {
+ u8 enable;
+ u32 count;
+ u16 length;
+ u8 payload_type;
+ u8 da[ETH_ALEN];
+};
+
+struct mp_xmit_packet {
+ u32 len;
+ u32 mem[MAX_MP_XMITBUF_SZ >> 2];
+};
+
+struct psmode_param {
+ u32 ps_mode;
+ u32 smart_ps;
+};
+
+/* for OID_RT_PRO_READ16_EEPROM & OID_RT_PRO_WRITE16_EEPROM */
+struct eeprom_rw_param {
+ u32 offset;
+ u16 value;
+};
+
+struct mp_ioctl_handler {
+ u32 paramsize;
+ s32 (*handler)(struct oid_par_priv* poid_par_priv);
+ u32 oid;
+};
+
+struct mp_ioctl_param{
+ u32 subcode;
+ u32 len;
+ u8 data[0];
+};
+
+#define GEN_MP_IOCTL_SUBCODE(code) _MP_IOCTL_ ## code ## _CMD_
+
+enum RTL871X_MP_IOCTL_SUBCODE {
+ GEN_MP_IOCTL_SUBCODE(MP_START), /*0*/
+ GEN_MP_IOCTL_SUBCODE(MP_STOP),
+ GEN_MP_IOCTL_SUBCODE(READ_REG),
+ GEN_MP_IOCTL_SUBCODE(WRITE_REG),
+ GEN_MP_IOCTL_SUBCODE(READ_BB_REG),
+ GEN_MP_IOCTL_SUBCODE(WRITE_BB_REG), /*5*/
+ GEN_MP_IOCTL_SUBCODE(READ_RF_REG),
+ GEN_MP_IOCTL_SUBCODE(WRITE_RF_REG),
+ GEN_MP_IOCTL_SUBCODE(SET_CHANNEL),
+ GEN_MP_IOCTL_SUBCODE(SET_TXPOWER),
+ GEN_MP_IOCTL_SUBCODE(SET_DATARATE), /*10*/
+ GEN_MP_IOCTL_SUBCODE(SET_BANDWIDTH),
+ GEN_MP_IOCTL_SUBCODE(SET_ANTENNA),
+ GEN_MP_IOCTL_SUBCODE(CNTU_TX),
+ GEN_MP_IOCTL_SUBCODE(SC_TX),
+ GEN_MP_IOCTL_SUBCODE(CS_TX), /*15*/
+ GEN_MP_IOCTL_SUBCODE(ST_TX),
+ GEN_MP_IOCTL_SUBCODE(IOCTL_XMIT_PACKET),
+ GEN_MP_IOCTL_SUBCODE(SET_RX_PKT_TYPE),
+ GEN_MP_IOCTL_SUBCODE(RESET_PHY_RX_PKT_CNT),
+ GEN_MP_IOCTL_SUBCODE(GET_PHY_RX_PKT_RECV), /*20*/
+ GEN_MP_IOCTL_SUBCODE(GET_PHY_RX_PKT_ERROR),
+ GEN_MP_IOCTL_SUBCODE(READ16_EEPROM),
+ GEN_MP_IOCTL_SUBCODE(WRITE16_EEPROM),
+ GEN_MP_IOCTL_SUBCODE(EFUSE),
+ GEN_MP_IOCTL_SUBCODE(EFUSE_MAP), /*25*/
+ GEN_MP_IOCTL_SUBCODE(GET_EFUSE_MAX_SIZE),
+ GEN_MP_IOCTL_SUBCODE(GET_EFUSE_CURRENT_SIZE),
+ GEN_MP_IOCTL_SUBCODE(GET_THERMAL_METER),
+ GEN_MP_IOCTL_SUBCODE(SET_PTM),
+ GEN_MP_IOCTL_SUBCODE(SET_POWER_DOWN), /*30*/
+ GEN_MP_IOCTL_SUBCODE(TRIGGER_GPIO),
+ GEN_MP_IOCTL_SUBCODE(SET_DM_BT), /*35*/
+ GEN_MP_IOCTL_SUBCODE(DEL_BA), /*36*/
+ GEN_MP_IOCTL_SUBCODE(GET_WIFI_STATUS), /*37*/
+ MAX_MP_IOCTL_SUBCODE,
+};
+
+s32 rtl8188eu_mp_ioctl_xmit_packet_hdl(struct oid_par_priv *poid_par_priv);
+
+#define GEN_HANDLER(sz, hdl, oid) {sz, hdl, oid},
+
+#define EXT_MP_IOCTL_HANDLER(sz, subcode, oid) \
+ {sz, rtl8188eu_mp_ioctl_##subcode##_hdl, oid},
+
+#endif
diff --git a/drivers/staging/r8188eu/include/rtw_mp_phy_regdef.h b/drivers/staging/r8188eu/include/rtw_mp_phy_regdef.h
new file mode 100644
index 000000000000..ae4c9df7f42a
--- /dev/null
+++ b/drivers/staging/r8188eu/include/rtw_mp_phy_regdef.h
@@ -0,0 +1,1079 @@
+/******************************************************************************
+ *
+ * Copyright(c) 2007 - 2011 Realtek Corporation. All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of version 2 of the GNU General Public License as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
+ * more details.
+ *
+ * You should have received a copy of the GNU General Public License along with
+ * this program; if not, write to the Free Software Foundation, Inc.,
+ * 51 Franklin Street, Fifth Floor, Boston, MA 02110, USA
+ *
+ *
+ ******************************************************************************/
+/*****************************************************************************
+ *
+ * Module: __RTW_MP_PHY_REGDEF_H_
+ *
+ *
+ * Note: 1. Define PMAC/BB register map
+ * 2. Define RF register map
+ * 3. PMAC/BB register bit mask.
+ * 4. RF reg bit mask.
+ * 5. Other BB/RF relative definition.
+ *
+ *
+ * Export: Constants, macro, functions(API), global variables(None).
+ *
+ * Abbrev:
+ *
+ * History:
+ * Data Who Remark
+ * 08/07/2007 MHC 1. Porting from 9x series PHYCFG.h.
+ * 2. Reorganize code architecture.
+ * 09/25/2008 MH 1. Add RL6052 register definition
+ *
+ *****************************************************************************/
+#ifndef __RTW_MP_PHY_REGDEF_H_
+#define __RTW_MP_PHY_REGDEF_H_
+
+/*--------------------------Define Parameters-------------------------------*/
+
+/* */
+/* 8192S Regsiter offset definition */
+/* */
+
+/* */
+/* BB-PHY register PMAC 0x100 PHY 0x800 - 0xEFF */
+/* 1. PMAC duplicate register due to connection: RF_Mode, TRxRN, NumOf L-STF */
+/* 2. 0x800/0x900/0xA00/0xC00/0xD00/0xE00 */
+/* 3. RF register 0x00-2E */
+/* 4. Bit Mask for BB/RF register */
+/* 5. Other definition for BB/RF R/W */
+/* */
+
+/* */
+/* 1. PMAC duplicate register due to connection: RF_Mode, TRxRN, NumOf L-STF */
+/* 1. Page1(0x100) */
+/* */
+#define rPMAC_Reset 0x100
+#define rPMAC_TxStart 0x104
+#define rPMAC_TxLegacySIG 0x108
+#define rPMAC_TxHTSIG1 0x10c
+#define rPMAC_TxHTSIG2 0x110
+#define rPMAC_PHYDebug 0x114
+#define rPMAC_TxPacketNum 0x118
+#define rPMAC_TxIdle 0x11c
+#define rPMAC_TxMACHeader0 0x120
+#define rPMAC_TxMACHeader1 0x124
+#define rPMAC_TxMACHeader2 0x128
+#define rPMAC_TxMACHeader3 0x12c
+#define rPMAC_TxMACHeader4 0x130
+#define rPMAC_TxMACHeader5 0x134
+#define rPMAC_TxDataType 0x138
+#define rPMAC_TxRandomSeed 0x13c
+#define rPMAC_CCKPLCPPreamble 0x140
+#define rPMAC_CCKPLCPHeader 0x144
+#define rPMAC_CCKCRC16 0x148
+#define rPMAC_OFDMRxCRC32OK 0x170
+#define rPMAC_OFDMRxCRC32Er 0x174
+#define rPMAC_OFDMRxParityEr 0x178
+#define rPMAC_OFDMRxCRC8Er 0x17c
+#define rPMAC_CCKCRxRC16Er 0x180
+#define rPMAC_CCKCRxRC32Er 0x184
+#define rPMAC_CCKCRxRC32OK 0x188
+#define rPMAC_TxStatus 0x18c
+
+/* */
+/* 2. Page2(0x200) */
+/* */
+/* The following two definition are only used for USB interface. */
+/* define RF_BB_CMD_ADDR 0x02c0 RF/BB read/write command address. */
+/* define RF_BB_CMD_DATA 0x02c4 RF/BB read/write command data. */
+
+/* */
+/* 3. Page8(0x800) */
+/* */
+#define rFPGA0_RFMOD 0x800 /* RF mode & CCK TxSC RF BW Setting?? */
+
+#define rFPGA0_TxInfo 0x804 /* Status report?? */
+#define rFPGA0_PSDFunction 0x808
+
+#define rFPGA0_TxGainStage 0x80c /* Set TX PWR init gain? */
+
+#define rFPGA0_RFTiming1 0x810 /* Useless now */
+#define rFPGA0_RFTiming2 0x814
+/* define rFPGA0_XC_RFTiming 0x818 */
+/* define rFPGA0_XD_RFTiming 0x81c */
+
+#define rFPGA0_XA_HSSIParameter1 0x820 /* RF 3 wire register */
+#define rFPGA0_XA_HSSIParameter2 0x824
+#define rFPGA0_XB_HSSIParameter1 0x828
+#define rFPGA0_XB_HSSIParameter2 0x82c
+#define rFPGA0_XC_HSSIParameter1 0x830
+#define rFPGA0_XC_HSSIParameter2 0x834
+#define rFPGA0_XD_HSSIParameter1 0x838
+#define rFPGA0_XD_HSSIParameter2 0x83c
+#define rFPGA0_XA_LSSIParameter 0x840
+#define rFPGA0_XB_LSSIParameter 0x844
+#define rFPGA0_XC_LSSIParameter 0x848
+#define rFPGA0_XD_LSSIParameter 0x84c
+
+#define rFPGA0_RFWakeUpParameter 0x850 /* Useless now */
+#define rFPGA0_RFSleepUpParameter 0x854
+
+#define rFPGA0_XAB_SwitchControl 0x858 /* RF Channel switch */
+#define rFPGA0_XCD_SwitchControl 0x85c
+
+#define rFPGA0_XA_RFInterfaceOE 0x860 /* RF Channel switch */
+#define rFPGA0_XB_RFInterfaceOE 0x864
+#define rFPGA0_XC_RFInterfaceOE 0x868
+#define rFPGA0_XD_RFInterfaceOE 0x86c
+
+#define rFPGA0_XAB_RFInterfaceSW 0x870 /* RF Interface Software Control */
+#define rFPGA0_XCD_RFInterfaceSW 0x874
+
+#define rFPGA0_XAB_RFParameter 0x878 /* RF Parameter */
+#define rFPGA0_XCD_RFParameter 0x87c
+
+#define rFPGA0_AnalogParameter1 0x880 /* Crystal cap setting RF-R/W protection for parameter4?? */
+#define rFPGA0_AnalogParameter2 0x884
+#define rFPGA0_AnalogParameter3 0x888 /* Useless now */
+#define rFPGA0_AnalogParameter4 0x88c
+
+#define rFPGA0_XA_LSSIReadBack 0x8a0 /* Tranceiver LSSI Readback */
+#define rFPGA0_XB_LSSIReadBack 0x8a4
+#define rFPGA0_XC_LSSIReadBack 0x8a8
+#define rFPGA0_XD_LSSIReadBack 0x8ac
+
+#define rFPGA0_PSDReport 0x8b4 /* Useless now */
+#define rFPGA0_XAB_RFInterfaceRB 0x8e0 /* Useless now RF Interface Readback Value */
+#define rFPGA0_XCD_RFInterfaceRB 0x8e4 /* Useless now */
+
+/* */
+/* 4. Page9(0x900) */
+/* */
+#define rFPGA1_RFMOD 0x900 /* RF mode & OFDM TxSC RF BW Setting?? */
+
+#define rFPGA1_TxBlock 0x904 /* Useless now */
+#define rFPGA1_DebugSelect 0x908 /* Useless now */
+#define rFPGA1_TxInfo 0x90c /* Useless now Status report?? */
+
+/* */
+/* 5. PageA(0xA00) */
+/* */
+/* Set Control channel to upper or lower. These settings are required only for 40MHz */
+#define rCCK0_System 0xa00
+
+#define rCCK0_AFESetting 0xa04 /* Disable init gain now Select RX path by RSSI */
+#define rCCK0_CCA 0xa08 /* Disable init gain now Init gain */
+
+#define rCCK0_RxAGC1 0xa0c /* AGC default value, saturation level Antenna Diversity, RX AGC, LNA Threshold, RX LNA Threshold useless now. Not the same as 90 series */
+#define rCCK0_RxAGC2 0xa10 /* AGC & DAGC */
+
+#define rCCK0_RxHP 0xa14
+
+#define rCCK0_DSPParameter1 0xa18 /* Timing recovery & Channel estimation threshold */
+#define rCCK0_DSPParameter2 0xa1c /* SQ threshold */
+
+#define rCCK0_TxFilter1 0xa20
+#define rCCK0_TxFilter2 0xa24
+#define rCCK0_DebugPort 0xa28 /* debug port and Tx filter3 */
+#define rCCK0_FalseAlarmReport 0xa2c /* 0xa2d useless now 0xa30-a4f channel report */
+#define rCCK0_TRSSIReport 0xa50
+#define rCCK0_RxReport 0xa54 /* 0xa57 */
+#define rCCK0_FACounterLower 0xa5c /* 0xa5b */
+#define rCCK0_FACounterUpper 0xa58 /* 0xa5c */
+
+/* */
+/* 6. PageC(0xC00) */
+/* */
+#define rOFDM0_LSTF 0xc00
+
+#define rOFDM0_TRxPathEnable 0xc04
+#define rOFDM0_TRMuxPar 0xc08
+#define rOFDM0_TRSWIsolation 0xc0c
+
+#define rOFDM0_XARxAFE 0xc10 /* RxIQ DC offset, Rx digital filter, DC notch filter */
+#define rOFDM0_XARxIQImbalance 0xc14 /* RxIQ imblance matrix */
+#define rOFDM0_XBRxAFE 0xc18
+#define rOFDM0_XBRxIQImbalance 0xc1c
+#define rOFDM0_XCRxAFE 0xc20
+#define rOFDM0_XCRxIQImbalance 0xc24
+#define rOFDM0_XDRxAFE 0xc28
+#define rOFDM0_XDRxIQImbalance 0xc2c
+
+#define rOFDM0_RxDetector1 0xc30 /* PD,BW & SBD DM tune init gain */
+#define rOFDM0_RxDetector2 0xc34 /* SBD & Fame Sync. */
+#define rOFDM0_RxDetector3 0xc38 /* Frame Sync. */
+#define rOFDM0_RxDetector4 0xc3c /* PD, SBD, Frame Sync & Short-GI */
+
+#define rOFDM0_RxDSP 0xc40 /* Rx Sync Path */
+#define rOFDM0_CFOandDAGC 0xc44 /* CFO & DAGC */
+#define rOFDM0_CCADropThreshold 0xc48 /* CCA Drop threshold */
+#define rOFDM0_ECCAThreshold 0xc4c /* energy CCA */
+
+#define rOFDM0_XAAGCCore1 0xc50 /* DIG */
+#define rOFDM0_XAAGCCore2 0xc54
+#define rOFDM0_XBAGCCore1 0xc58
+#define rOFDM0_XBAGCCore2 0xc5c
+#define rOFDM0_XCAGCCore1 0xc60
+#define rOFDM0_XCAGCCore2 0xc64
+#define rOFDM0_XDAGCCore1 0xc68
+#define rOFDM0_XDAGCCore2 0xc6c
+
+#define rOFDM0_AGCParameter1 0xc70
+#define rOFDM0_AGCParameter2 0xc74
+#define rOFDM0_AGCRSSITable 0xc78
+#define rOFDM0_HTSTFAGC 0xc7c
+
+#define rOFDM0_XATxIQImbalance 0xc80 /* TX PWR TRACK and DIG */
+#define rOFDM0_XATxAFE 0xc84
+#define rOFDM0_XBTxIQImbalance 0xc88
+#define rOFDM0_XBTxAFE 0xc8c
+#define rOFDM0_XCTxIQImbalance 0xc90
+#define rOFDM0_XCTxAFE 0xc94
+#define rOFDM0_XDTxIQImbalance 0xc98
+#define rOFDM0_XDTxAFE 0xc9c
+#define rOFDM0_RxIQExtAnta 0xca0
+
+#define rOFDM0_RxHPParameter 0xce0
+#define rOFDM0_TxPseudoNoiseWgt 0xce4
+#define rOFDM0_FrameSync 0xcf0
+#define rOFDM0_DFSReport 0xcf4
+#define rOFDM0_TxCoeff1 0xca4
+#define rOFDM0_TxCoeff2 0xca8
+#define rOFDM0_TxCoeff3 0xcac
+#define rOFDM0_TxCoeff4 0xcb0
+#define rOFDM0_TxCoeff5 0xcb4
+#define rOFDM0_TxCoeff6 0xcb8
+
+/* 7. PageD(0xD00) */
+#define rOFDM1_LSTF 0xd00
+#define rOFDM1_TRxPathEnable 0xd04
+
+#define rOFDM1_CFO 0xd08 /* No setting now */
+#define rOFDM1_CSI1 0xd10
+#define rOFDM1_SBD 0xd14
+#define rOFDM1_CSI2 0xd18
+#define rOFDM1_CFOTracking 0xd2c
+#define rOFDM1_TRxMesaure1 0xd34
+#define rOFDM1_IntfDet 0xd3c
+#define rOFDM1_PseudoNoiseStateAB 0xd50
+#define rOFDM1_PseudoNoiseStateCD 0xd54
+#define rOFDM1_RxPseudoNoiseWgt 0xd58
+
+#define rOFDM_PHYCounter1 0xda0 /* cca, parity fail */
+#define rOFDM_PHYCounter2 0xda4 /* rate illegal, crc8 fail */
+#define rOFDM_PHYCounter3 0xda8 /* MCS not support */
+
+#define rOFDM_ShortCFOAB 0xdac /* No setting now */
+#define rOFDM_ShortCFOCD 0xdb0
+#define rOFDM_LongCFOAB 0xdb4
+#define rOFDM_LongCFOCD 0xdb8
+#define rOFDM_TailCFOAB 0xdbc
+#define rOFDM_TailCFOCD 0xdc0
+#define rOFDM_PWMeasure1 0xdc4
+#define rOFDM_PWMeasure2 0xdc8
+#define rOFDM_BWReport 0xdcc
+#define rOFDM_AGCReport 0xdd0
+#define rOFDM_RxSNR 0xdd4
+#define rOFDM_RxEVMCSI 0xdd8
+#define rOFDM_SIGReport 0xddc
+
+/* */
+/* 8. PageE(0xE00) */
+/* */
+#define rTxAGC_Rate18_06 0xe00
+#define rTxAGC_Rate54_24 0xe04
+#define rTxAGC_CCK_Mcs32 0xe08
+#define rTxAGC_Mcs03_Mcs00 0xe10
+#define rTxAGC_Mcs07_Mcs04 0xe14
+#define rTxAGC_Mcs11_Mcs08 0xe18
+#define rTxAGC_Mcs15_Mcs12 0xe1c
+
+/* Analog- control in RX_WAIT_CCA : REG: EE0 [Analog- Power & Control Register] */
+#define rRx_Wait_CCCA 0xe70
+#define rAnapar_Ctrl_BB 0xee0
+
+/* */
+/* 7. RF Register 0x00-0x2E (RF 8256) */
+/* RF-0222D 0x00-3F */
+/* */
+/* Zebra1 */
+#define RTL92SE_FPGA_VERIFY 0
+#define rZebra1_HSSIEnable 0x0 /* Useless now */
+#define rZebra1_TRxEnable1 0x1
+#define rZebra1_TRxEnable2 0x2
+#define rZebra1_AGC 0x4
+#define rZebra1_ChargePump 0x5
+/* if (RTL92SE_FPGA_VERIFY == 1) */
+#define rZebra1_Channel 0x7 /* RF channel switch */
+/* else */
+
+/* endif */
+#define rZebra1_TxGain 0x8 /* Useless now */
+#define rZebra1_TxLPF 0x9
+#define rZebra1_RxLPF 0xb
+#define rZebra1_RxHPFCorner 0xc
+
+/* Zebra4 */
+#define rGlobalCtrl 0 /* Useless now */
+#define rRTL8256_TxLPF 19
+#define rRTL8256_RxLPF 11
+
+/* RTL8258 */
+#define rRTL8258_TxLPF 0x11 /* Useless now */
+#define rRTL8258_RxLPF 0x13
+#define rRTL8258_RSSILPF 0xa
+
+/* */
+/* RL6052 Register definition */
+#define RF_AC 0x00 /* */
+
+#define RF_IQADJ_G1 0x01 /* */
+#define RF_IQADJ_G2 0x02 /* */
+#define RF_POW_TRSW 0x05 /* */
+
+#define RF_GAIN_RX 0x06 /* */
+#define RF_GAIN_TX 0x07 /* */
+
+#define RF_TXM_IDAC 0x08 /* */
+#define RF_BS_IQGEN 0x0F /* */
+
+#define RF_MODE1 0x10 /* */
+#define RF_MODE2 0x11 /* */
+
+#define RF_RX_AGC_HP 0x12 /* */
+#define RF_TX_AGC 0x13 /* */
+#define RF_BIAS 0x14 /* */
+#define RF_IPA 0x15 /* */
+#define RF_TXBIAS 0x16 /* */
+#define RF_POW_ABILITY 0x17 /* */
+#define RF_MODE_AG 0x18 /* */
+#define rRfChannel 0x18 /* RF channel and BW switch */
+#define RF_CHNLBW 0x18 /* RF channel and BW switch */
+#define RF_TOP 0x19 /* */
+
+#define RF_RX_G1 0x1A /* */
+#define RF_RX_G2 0x1B /* */
+
+#define RF_RX_BB2 0x1C /* */
+#define RF_RX_BB1 0x1D /* */
+
+#define RF_RCK1 0x1E /* */
+#define RF_RCK2 0x1F /* */
+
+#define RF_TX_G1 0x20 /* */
+#define RF_TX_G2 0x21 /* */
+#define RF_TX_G3 0x22 /* */
+
+#define RF_TX_BB1 0x23 /* */
+
+#define RF_T_METER 0x24 /* */
+
+#define RF_SYN_G1 0x25 /* RF TX Power control */
+#define RF_SYN_G2 0x26 /* RF TX Power control */
+#define RF_SYN_G3 0x27 /* RF TX Power control */
+#define RF_SYN_G4 0x28 /* RF TX Power control */
+#define RF_SYN_G5 0x29 /* RF TX Power control */
+#define RF_SYN_G6 0x2A /* RF TX Power control */
+#define RF_SYN_G7 0x2B /* RF TX Power control */
+#define RF_SYN_G8 0x2C /* RF TX Power control */
+
+#define RF_RCK_OS 0x30 /* RF TX PA control */
+#define RF_TXPA_G1 0x31 /* RF TX PA control */
+#define RF_TXPA_G2 0x32 /* RF TX PA control */
+#define RF_TXPA_G3 0x33 /* RF TX PA control */
+
+/* */
+/* Bit Mask */
+/* */
+/* 1. Page1(0x100) */
+#define bBBResetB 0x100 /* Useless now? */
+#define bGlobalResetB 0x200
+#define bOFDMTxStart 0x4
+#define bCCKTxStart 0x8
+#define bCRC32Debug 0x100
+#define bPMACLoopback 0x10
+#define bTxLSIG 0xffffff
+#define bOFDMTxRate 0xf
+#define bOFDMTxReserved 0x10
+#define bOFDMTxLength 0x1ffe0
+#define bOFDMTxParity 0x20000
+#define bTxHTSIG1 0xffffff
+#define bTxHTMCSRate 0x7f
+#define bTxHTBW 0x80
+#define bTxHTLength 0xffff00
+#define bTxHTSIG2 0xffffff
+#define bTxHTSmoothing 0x1
+#define bTxHTSounding 0x2
+#define bTxHTReserved 0x4
+#define bTxHTAggreation 0x8
+#define bTxHTSTBC 0x30
+#define bTxHTAdvanceCoding 0x40
+#define bTxHTShortGI 0x80
+#define bTxHTNumberHT_LTF 0x300
+#define bTxHTCRC8 0x3fc00
+#define bCounterReset 0x10000
+#define bNumOfOFDMTx 0xffff
+#define bNumOfCCKTx 0xffff0000
+#define bTxIdleInterval 0xffff
+#define bOFDMService 0xffff0000
+#define bTxMACHeader 0xffffffff
+#define bTxDataInit 0xff
+#define bTxHTMode 0x100
+#define bTxDataType 0x30000
+#define bTxRandomSeed 0xffffffff
+#define bCCKTxPreamble 0x1
+#define bCCKTxSFD 0xffff0000
+#define bCCKTxSIG 0xff
+#define bCCKTxService 0xff00
+#define bCCKLengthExt 0x8000
+#define bCCKTxLength 0xffff0000
+#define bCCKTxCRC16 0xffff
+#define bCCKTxStatus 0x1
+#define bOFDMTxStatus 0x2
+
+#define IS_BB_REG_OFFSET_92S(_Offset) ((_Offset >= 0x800) && (_Offset <= 0xfff))
+
+/* 2. Page8(0x800) */
+#define bRFMOD 0x1 /* Reg 0x800 rFPGA0_RFMOD */
+#define bJapanMode 0x2
+#define bCCKTxSC 0x30
+#define bCCKEn 0x1000000
+#define bOFDMEn 0x2000000
+
+#define bOFDMRxADCPhase 0x10000 /* Useless now */
+#define bOFDMTxDACPhase 0x40000
+#define bXATxAGC 0x3f
+
+#define bXBTxAGC 0xf00 /* Reg 80c rFPGA0_TxGainStage */
+#define bXCTxAGC 0xf000
+#define bXDTxAGC 0xf0000
+
+#define bPAStart 0xf0000000 /* Useless now */
+#define bTRStart 0x00f00000
+#define bRFStart 0x0000f000
+#define bBBStart 0x000000f0
+#define bBBCCKStart 0x0000000f
+#define bPAEnd 0xf /* Reg0x814 */
+#define bTREnd 0x0f000000
+#define bRFEnd 0x000f0000
+#define bCCAMask 0x000000f0 /* T2R */
+#define bR2RCCAMask 0x00000f00
+#define bHSSI_R2TDelay 0xf8000000
+#define bHSSI_T2RDelay 0xf80000
+#define bContTxHSSI 0x400 /* chane gain at continue Tx */
+#define bIGFromCCK 0x200
+#define bAGCAddress 0x3f
+#define bRxHPTx 0x7000
+#define bRxHPT2R 0x38000
+#define bRxHPCCKIni 0xc0000
+#define bAGCTxCode 0xc00000
+#define bAGCRxCode 0x300000
+
+#define b3WireDataLength 0x800 /* Reg 0x820~84f rFPGA0_XA_HSSIParameter1 */
+#define b3WireAddressLength 0x400
+
+#define b3WireRFPowerDown 0x1 /* Useless now */
+/* define bHWSISelect 0x8 */
+#define b5GPAPEPolarity 0x40000000
+#define b2GPAPEPolarity 0x80000000
+#define bRFSW_TxDefaultAnt 0x3
+#define bRFSW_TxOptionAnt 0x30
+#define bRFSW_RxDefaultAnt 0x300
+#define bRFSW_RxOptionAnt 0x3000
+#define bRFSI_3WireData 0x1
+#define bRFSI_3WireClock 0x2
+#define bRFSI_3WireLoad 0x4
+#define bRFSI_3WireRW 0x8
+#define bRFSI_3Wire 0xf
+
+#define bRFSI_RFENV 0x10 /* Reg 0x870 rFPGA0_XAB_RFInterfaceSW */
+
+#define bRFSI_TRSW 0x20 /* Useless now */
+#define bRFSI_TRSWB 0x40
+#define bRFSI_ANTSW 0x100
+#define bRFSI_ANTSWB 0x200
+#define bRFSI_PAPE 0x400
+#define bRFSI_PAPE5G 0x800
+#define bBandSelect 0x1
+#define bHTSIG2_GI 0x80
+#define bHTSIG2_Smoothing 0x01
+#define bHTSIG2_Sounding 0x02
+#define bHTSIG2_Aggreaton 0x08
+#define bHTSIG2_STBC 0x30
+#define bHTSIG2_AdvCoding 0x40
+#define bHTSIG2_NumOfHTLTF 0x300
+#define bHTSIG2_CRC8 0x3fc
+#define bHTSIG1_MCS 0x7f
+#define bHTSIG1_BandWidth 0x80
+#define bHTSIG1_HTLength 0xffff
+#define bLSIG_Rate 0xf
+#define bLSIG_Reserved 0x10
+#define bLSIG_Length 0x1fffe
+#define bLSIG_Parity 0x20
+#define bCCKRxPhase 0x4
+#if (RTL92SE_FPGA_VERIFY == 1)
+#define bLSSIReadAddress 0x3f000000 /* LSSI "Read" Address
+ Reg 0x824 rFPGA0_XA_HSSIParameter2 */
+#else
+#define bLSSIReadAddress 0x7f800000 /* T65 RF */
+#endif
+#define bLSSIReadEdge 0x80000000 /* LSSI "Read" edge signal */
+#if (RTL92SE_FPGA_VERIFY == 1)
+#define bLSSIReadBackData 0xfff /* Reg 0x8a0
+ rFPGA0_XA_LSSIReadBack */
+#else
+#define bLSSIReadBackData 0xfffff /* T65 RF */
+#endif
+#define bLSSIReadOKFlag 0x1000 /* Useless now */
+#define bCCKSampleRate 0x8 /* 0: 44MHz, 1:88MHz */
+#define bRegulator0Standby 0x1
+#define bRegulatorPLLStandby 0x2
+#define bRegulator1Standby 0x4
+#define bPLLPowerUp 0x8
+#define bDPLLPowerUp 0x10
+#define bDA10PowerUp 0x20
+#define bAD7PowerUp 0x200
+#define bDA6PowerUp 0x2000
+#define bXtalPowerUp 0x4000
+#define b40MDClkPowerUP 0x8000
+#define bDA6DebugMode 0x20000
+#define bDA6Swing 0x380000
+
+#define bADClkPhase 0x4000000 /* Reg 0x880
+ rFPGA0_AnalogParameter1 20/40 CCK support switch 40/80 BB MHZ */
+
+#define b80MClkDelay 0x18000000 /* Useless */
+#define bAFEWatchDogEnable 0x20000000
+
+#define bXtalCap01 0xc0000000 /* Reg 0x884
+ rFPGA0_AnalogParameter2 Crystal cap */
+#define bXtalCap23 0x3
+#define bXtalCap92x 0x0f000000
+#define bXtalCap 0x0f000000
+
+#define bIntDifClkEnable 0x400 /* Useless */
+#define bExtSigClkEnable 0x800
+#define bBandgapMbiasPowerUp 0x10000
+#define bAD11SHGain 0xc0000
+#define bAD11InputRange 0x700000
+#define bAD11OPCurrent 0x3800000
+#define bIPathLoopback 0x4000000
+#define bQPathLoopback 0x8000000
+#define bAFELoopback 0x10000000
+#define bDA10Swing 0x7e0
+#define bDA10Reverse 0x800
+#define bDAClkSource 0x1000
+#define bAD7InputRange 0x6000
+#define bAD7Gain 0x38000
+#define bAD7OutputCMMode 0x40000
+#define bAD7InputCMMode 0x380000
+#define bAD7Current 0xc00000
+#define bRegulatorAdjust 0x7000000
+#define bAD11PowerUpAtTx 0x1
+#define bDA10PSAtTx 0x10
+#define bAD11PowerUpAtRx 0x100
+#define bDA10PSAtRx 0x1000
+#define bCCKRxAGCFormat 0x200
+#define bPSDFFTSamplepPoint 0xc000
+#define bPSDAverageNum 0x3000
+#define bIQPathControl 0xc00
+#define bPSDFreq 0x3ff
+#define bPSDAntennaPath 0x30
+#define bPSDIQSwitch 0x40
+#define bPSDRxTrigger 0x400000
+#define bPSDTxTrigger 0x80000000
+#define bPSDSineToneScale 0x7f000000
+#define bPSDReport 0xffff
+
+/* 3. Page9(0x900) */
+#define bOFDMTxSC 0x30000000 /* Useless */
+#define bCCKTxOn 0x1
+#define bOFDMTxOn 0x2
+#define bDebugPage 0xfff /* reset debug page and HWord,
+ * LWord */
+#define bDebugItem 0xff /* reset debug page and LWord */
+#define bAntL 0x10
+#define bAntNonHT 0x100
+#define bAntHT1 0x1000
+#define bAntHT2 0x10000
+#define bAntHT1S1 0x100000
+#define bAntNonHTS1 0x1000000
+
+/* 4. PageA(0xA00) */
+#define bCCKBBMode 0x3 /* Useless */
+#define bCCKTxPowerSaving 0x80
+#define bCCKRxPowerSaving 0x40
+
+#define bCCKSideBand 0x10 /* Reg 0xa00 rCCK0 20/40 sw */
+
+#define bCCKScramble 0x8 /* Useless */
+#define bCCKAntDiversity 0x8000
+#define bCCKCarrierRecovery 0x4000
+#define bCCKTxRate 0x3000
+#define bCCKDCCancel 0x0800
+#define bCCKISICancel 0x0400
+#define bCCKMatchFilter 0x0200
+#define bCCKEqualizer 0x0100
+#define bCCKPreambleDetect 0x800000
+#define bCCKFastFalseCCA 0x400000
+#define bCCKChEstStart 0x300000
+#define bCCKCCACount 0x080000
+#define bCCKcs_lim 0x070000
+#define bCCKBistMode 0x80000000
+#define bCCKCCAMask 0x40000000
+#define bCCKTxDACPhase 0x4
+#define bCCKRxADCPhase 0x20000000 /* r_rx_clk */
+#define bCCKr_cp_mode0 0x0100
+#define bCCKTxDCOffset 0xf0
+#define bCCKRxDCOffset 0xf
+#define bCCKCCAMode 0xc000
+#define bCCKFalseCS_lim 0x3f00
+#define bCCKCS_ratio 0xc00000
+#define bCCKCorgBit_sel 0x300000
+#define bCCKPD_lim 0x0f0000
+#define bCCKNewCCA 0x80000000
+#define bCCKRxHPofIG 0x8000
+#define bCCKRxIG 0x7f00
+#define bCCKLNAPolarity 0x800000
+#define bCCKRx1stGain 0x7f0000
+#define bCCKRFExtend 0x20000000 /* CCK Rx init gain polar */
+#define bCCKRxAGCSatLevel 0x1f000000
+#define bCCKRxAGCSatCount 0xe0
+#define bCCKRxRFSettle 0x1f /* AGCsamp_dly */
+#define bCCKFixedRxAGC 0x8000
+#define bCCKAntennaPolarity 0x2000
+#define bCCKTxFilterType 0x0c00
+#define bCCKRxAGCReportType 0x0300
+#define bCCKRxDAGCEn 0x80000000
+#define bCCKRxDAGCPeriod 0x20000000
+#define bCCKRxDAGCSatLevel 0x1f000000
+#define bCCKTimingRecovery 0x800000
+#define bCCKTxC0 0x3f0000
+#define bCCKTxC1 0x3f000000
+#define bCCKTxC2 0x3f
+#define bCCKTxC3 0x3f00
+#define bCCKTxC4 0x3f0000
+#define bCCKTxC5 0x3f000000
+#define bCCKTxC6 0x3f
+#define bCCKTxC7 0x3f00
+#define bCCKDebugPort 0xff0000
+#define bCCKDACDebug 0x0f000000
+#define bCCKFalseAlarmEnable 0x8000
+#define bCCKFalseAlarmRead 0x4000
+#define bCCKTRSSI 0x7f
+#define bCCKRxAGCReport 0xfe
+#define bCCKRxReport_AntSel 0x80000000
+#define bCCKRxReport_MFOff 0x40000000
+#define bCCKRxRxReport_SQLoss 0x20000000
+#define bCCKRxReport_Pktloss 0x10000000
+#define bCCKRxReport_Lockedbit 0x08000000
+#define bCCKRxReport_RateError 0x04000000
+#define bCCKRxReport_RxRate 0x03000000
+#define bCCKRxFACounterLower 0xff
+#define bCCKRxFACounterUpper 0xff000000
+#define bCCKRxHPAGCStart 0xe000
+#define bCCKRxHPAGCFinal 0x1c00
+#define bCCKRxFalseAlarmEnable 0x8000
+#define bCCKFACounterFreeze 0x4000
+#define bCCKTxPathSel 0x10000000
+#define bCCKDefaultRxPath 0xc000000
+#define bCCKOptionRxPath 0x3000000
+
+/* 5. PageC(0xC00) */
+#define bNumOfSTF 0x3 /* Useless */
+#define bShift_L 0xc0
+#define bGI_TH 0xc
+#define bRxPathA 0x1
+#define bRxPathB 0x2
+#define bRxPathC 0x4
+#define bRxPathD 0x8
+#define bTxPathA 0x1
+#define bTxPathB 0x2
+#define bTxPathC 0x4
+#define bTxPathD 0x8
+#define bTRSSIFreq 0x200
+#define bADCBackoff 0x3000
+#define bDFIRBackoff 0xc000
+#define bTRSSILatchPhase 0x10000
+#define bRxIDCOffset 0xff
+#define bRxQDCOffset 0xff00
+#define bRxDFIRMode 0x1800000
+#define bRxDCNFType 0xe000000
+#define bRXIQImb_A 0x3ff
+#define bRXIQImb_B 0xfc00
+#define bRXIQImb_C 0x3f0000
+#define bRXIQImb_D 0xffc00000
+#define bDC_dc_Notch 0x60000
+#define bRxNBINotch 0x1f000000
+#define bPD_TH 0xf
+#define bPD_TH_Opt2 0xc000
+#define bPWED_TH 0x700
+#define bIfMF_Win_L 0x800
+#define bPD_Option 0x1000
+#define bMF_Win_L 0xe000
+#define bBW_Search_L 0x30000
+#define bwin_enh_L 0xc0000
+#define bBW_TH 0x700000
+#define bED_TH2 0x3800000
+#define bBW_option 0x4000000
+#define bRatio_TH 0x18000000
+#define bWindow_L 0xe0000000
+#define bSBD_Option 0x1
+#define bFrame_TH 0x1c
+#define bFS_Option 0x60
+#define bDC_Slope_check 0x80
+#define bFGuard_Counter_DC_L 0xe00
+#define bFrame_Weight_Short 0x7000
+#define bSub_Tune 0xe00000
+#define bFrame_DC_Length 0xe000000
+#define bSBD_start_offset 0x30000000
+#define bFrame_TH_2 0x7
+#define bFrame_GI2_TH 0x38
+#define bGI2_Sync_en 0x40
+#define bSarch_Short_Early 0x300
+#define bSarch_Short_Late 0xc00
+#define bSarch_GI2_Late 0x70000
+#define bCFOAntSum 0x1
+#define bCFOAcc 0x2
+#define bCFOStartOffset 0xc
+#define bCFOLookBack 0x70
+#define bCFOSumWeight 0x80
+#define bDAGCEnable 0x10000
+#define bTXIQImb_A 0x3ff
+#define bTXIQImb_B 0xfc00
+#define bTXIQImb_C 0x3f0000
+#define bTXIQImb_D 0xffc00000
+#define bTxIDCOffset 0xff
+#define bTxQDCOffset 0xff00
+#define bTxDFIRMode 0x10000
+#define bTxPesudoNoiseOn 0x4000000
+#define bTxPesudoNoise_A 0xff
+#define bTxPesudoNoise_B 0xff00
+#define bTxPesudoNoise_C 0xff0000
+#define bTxPesudoNoise_D 0xff000000
+#define bCCADropOption 0x20000
+#define bCCADropThres 0xfff00000
+#define bEDCCA_H 0xf
+#define bEDCCA_L 0xf0
+#define bLambda_ED 0x300
+#define bRxInitialGain 0x7f
+#define bRxAntDivEn 0x80
+#define bRxAGCAddressForLNA 0x7f00
+#define bRxHighPowerFlow 0x8000
+#define bRxAGCFreezeThres 0xc0000
+#define bRxFreezeStep_AGC1 0x300000
+#define bRxFreezeStep_AGC2 0xc00000
+#define bRxFreezeStep_AGC3 0x3000000
+#define bRxFreezeStep_AGC0 0xc000000
+#define bRxRssi_Cmp_En 0x10000000
+#define bRxQuickAGCEn 0x20000000
+#define bRxAGCFreezeThresMode 0x40000000
+#define bRxOverFlowCheckType 0x80000000
+#define bRxAGCShift 0x7f
+#define bTRSW_Tri_Only 0x80
+#define bPowerThres 0x300
+#define bRxAGCEn 0x1
+#define bRxAGCTogetherEn 0x2
+#define bRxAGCMin 0x4
+#define bRxHP_Ini 0x7
+#define bRxHP_TRLNA 0x70
+#define bRxHP_RSSI 0x700
+#define bRxHP_BBP1 0x7000
+#define bRxHP_BBP2 0x70000
+#define bRxHP_BBP3 0x700000
+#define bRSSI_H 0x7f0000 /* thresh for hi power */
+#define bRSSI_Gen 0x7f000000 /* thresh for ant div */
+#define bRxSettle_TRSW 0x7
+#define bRxSettle_LNA 0x38
+#define bRxSettle_RSSI 0x1c0
+#define bRxSettle_BBP 0xe00
+#define bRxSettle_RxHP 0x7000
+#define bRxSettle_AntSW_RSSI 0x38000
+#define bRxSettle_AntSW 0xc0000
+#define bRxProcessTime_DAGC 0x300000
+#define bRxSettle_HSSI 0x400000
+#define bRxProcessTime_BBPPW 0x800000
+#define bRxAntennaPowerShift 0x3000000
+#define bRSSITableSelect 0xc000000
+#define bRxHP_Final 0x7000000
+#define bRxHTSettle_BBP 0x7
+#define bRxHTSettle_HSSI 0x8
+#define bRxHTSettle_RxHP 0x70
+#define bRxHTSettle_BBPPW 0x80
+#define bRxHTSettle_Idle 0x300
+#define bRxHTSettle_Reserved 0x1c00
+#define bRxHTRxHPEn 0x8000
+#define bRxHTAGCFreezeThres 0x30000
+#define bRxHTAGCTogetherEn 0x40000
+#define bRxHTAGCMin 0x80000
+#define bRxHTAGCEn 0x100000
+#define bRxHTDAGCEn 0x200000
+#define bRxHTRxHP_BBP 0x1c00000
+#define bRxHTRxHP_Final 0xe0000000
+#define bRxPWRatioTH 0x3
+#define bRxPWRatioEn 0x4
+#define bRxMFHold 0x3800
+#define bRxPD_Delay_TH1 0x38
+#define bRxPD_Delay_TH2 0x1c0
+#define bRxPD_DC_COUNT_MAX 0x600
+/* define bRxMF_Hold 0x3800 */
+#define bRxPD_Delay_TH 0x8000
+#define bRxProcess_Delay 0xf0000
+#define bRxSearchrange_GI2_Early 0x700000
+#define bRxFrame_Guard_Counter_L 0x3800000
+#define bRxSGI_Guard_L 0xc000000
+#define bRxSGI_Search_L 0x30000000
+#define bRxSGI_TH 0xc0000000
+#define bDFSCnt0 0xff
+#define bDFSCnt1 0xff00
+#define bDFSFlag 0xf0000
+#define bMFWeightSum 0x300000
+#define bMinIdxTH 0x7f000000
+#define bDAFormat 0x40000
+#define bTxChEmuEnable 0x01000000
+#define bTRSWIsolation_A 0x7f
+#define bTRSWIsolation_B 0x7f00
+#define bTRSWIsolation_C 0x7f0000
+#define bTRSWIsolation_D 0x7f000000
+#define bExtLNAGain 0x7c00
+
+/* 6. PageE(0xE00) */
+#define bSTBCEn 0x4 /* Useless */
+#define bAntennaMapping 0x10
+#define bNss 0x20
+#define bCFOAntSumD 0x200
+#define bPHYCounterReset 0x8000000
+#define bCFOReportGet 0x4000000
+#define bOFDMContinueTx 0x10000000
+#define bOFDMSingleCarrier 0x20000000
+#define bOFDMSingleTone 0x40000000
+/* define bRxPath1 0x01 */
+/* define bRxPath2 0x02 */
+/* define bRxPath3 0x04 */
+/* define bRxPath4 0x08 */
+/* define bTxPath1 0x10 */
+/* define bTxPath2 0x20 */
+#define bHTDetect 0x100
+#define bCFOEn 0x10000
+#define bCFOValue 0xfff00000
+#define bSigTone_Re 0x3f
+#define bSigTone_Im 0x7f00
+#define bCounter_CCA 0xffff
+#define bCounter_ParityFail 0xffff0000
+#define bCounter_RateIllegal 0xffff
+#define bCounter_CRC8Fail 0xffff0000
+#define bCounter_MCSNoSupport 0xffff
+#define bCounter_FastSync 0xffff
+#define bShortCFO 0xfff
+#define bShortCFOTLength 12 /* total */
+#define bShortCFOFLength 11 /* fraction */
+#define bLongCFO 0x7ff
+#define bLongCFOTLength 11
+#define bLongCFOFLength 11
+#define bTailCFO 0x1fff
+#define bTailCFOTLength 13
+#define bTailCFOFLength 12
+#define bmax_en_pwdB 0xffff
+#define bCC_power_dB 0xffff0000
+#define bnoise_pwdB 0xffff
+#define bPowerMeasTLength 10
+#define bPowerMeasFLength 3
+#define bRx_HT_BW 0x1
+#define bRxSC 0x6
+#define bRx_HT 0x8
+#define bNB_intf_det_on 0x1
+#define bIntf_win_len_cfg 0x30
+#define bNB_Intf_TH_cfg 0x1c0
+#define bRFGain 0x3f
+#define bTableSel 0x40
+#define bTRSW 0x80
+#define bRxSNR_A 0xff
+#define bRxSNR_B 0xff00
+#define bRxSNR_C 0xff0000
+#define bRxSNR_D 0xff000000
+#define bSNREVMTLength 8
+#define bSNREVMFLength 1
+#define bCSI1st 0xff
+#define bCSI2nd 0xff00
+#define bRxEVM1st 0xff0000
+#define bRxEVM2nd 0xff000000
+#define bSIGEVM 0xff
+#define bPWDB 0xff00
+#define bSGIEN 0x10000
+
+#define bSFactorQAM1 0xf /* Useless */
+#define bSFactorQAM2 0xf0
+#define bSFactorQAM3 0xf00
+#define bSFactorQAM4 0xf000
+#define bSFactorQAM5 0xf0000
+#define bSFactorQAM6 0xf0000
+#define bSFactorQAM7 0xf00000
+#define bSFactorQAM8 0xf000000
+#define bSFactorQAM9 0xf0000000
+#define bCSIScheme 0x100000
+
+#define bNoiseLvlTopSet 0x3 /* Useless */
+#define bChSmooth 0x4
+#define bChSmoothCfg1 0x38
+#define bChSmoothCfg2 0x1c0
+#define bChSmoothCfg3 0xe00
+#define bChSmoothCfg4 0x7000
+#define bMRCMode 0x800000
+#define bTHEVMCfg 0x7000000
+
+#define bLoopFitType 0x1 /* Useless */
+#define bUpdCFO 0x40
+#define bUpdCFOOffData 0x80
+#define bAdvUpdCFO 0x100
+#define bAdvTimeCtrl 0x800
+#define bUpdClko 0x1000
+#define bFC 0x6000
+#define bTrackingMode 0x8000
+#define bPhCmpEnable 0x10000
+#define bUpdClkoLTF 0x20000
+#define bComChCFO 0x40000
+#define bCSIEstiMode 0x80000
+#define bAdvUpdEqz 0x100000
+#define bUChCfg 0x7000000
+#define bUpdEqz 0x8000000
+
+#define bTxAGCRate18_06 0x7f7f7f7f /* Useless */
+#define bTxAGCRate54_24 0x7f7f7f7f
+#define bTxAGCRateMCS32 0x7f
+#define bTxAGCRateCCK 0x7f00
+#define bTxAGCRateMCS3_MCS0 0x7f7f7f7f
+#define bTxAGCRateMCS7_MCS4 0x7f7f7f7f
+#define bTxAGCRateMCS11_MCS8 0x7f7f7f7f
+#define bTxAGCRateMCS15_MCS12 0x7f7f7f7f
+
+/* Rx Pseduo noise */
+#define bRxPesudoNoiseOn 0x20000000 /* Useless */
+#define bRxPesudoNoise_A 0xff
+#define bRxPesudoNoise_B 0xff00
+#define bRxPesudoNoise_C 0xff0000
+#define bRxPesudoNoise_D 0xff000000
+#define bPesudoNoiseState_A 0xffff
+#define bPesudoNoiseState_B 0xffff0000
+#define bPesudoNoiseState_C 0xffff
+#define bPesudoNoiseState_D 0xffff0000
+
+/* 7. RF Register */
+/* Zebra1 */
+#define bZebra1_HSSIEnable 0x8 /* Useless */
+#define bZebra1_TRxControl 0xc00
+#define bZebra1_TRxGainSetting 0x07f
+#define bZebra1_RxCorner 0xc00
+#define bZebra1_TxChargePump 0x38
+#define bZebra1_RxChargePump 0x7
+#define bZebra1_ChannelNum 0xf80
+#define bZebra1_TxLPFBW 0x400
+#define bZebra1_RxLPFBW 0x600
+
+/* Zebra4 */
+#define bRTL8256RegModeCtrl1 0x100 /* Useless */
+#define bRTL8256RegModeCtrl0 0x40
+#define bRTL8256_TxLPFBW 0x18
+#define bRTL8256_RxLPFBW 0x600
+
+/* RTL8258 */
+#define bRTL8258_TxLPFBW 0xc /* Useless */
+#define bRTL8258_RxLPFBW 0xc00
+#define bRTL8258_RSSILPFBW 0xc0
+
+/* */
+/* Other Definition */
+/* */
+
+/* byte endable for sb_write */
+#define bByte0 0x1 /* Useless */
+#define bByte1 0x2
+#define bByte2 0x4
+#define bByte3 0x8
+#define bWord0 0x3
+#define bWord1 0xc
+#define bDWord 0xf
+
+/* for PutRegsetting & GetRegSetting BitMask */
+#define bMaskByte0 0xff /* Reg 0xc50 rOFDM0_XAAGCCore~0xC6f */
+#define bMaskByte1 0xff00
+#define bMaskByte2 0xff0000
+#define bMaskByte3 0xff000000
+#define bMaskHWord 0xffff0000
+#define bMaskLWord 0x0000ffff
+#define bMaskDWord 0xffffffff
+#define bMaskH4Bits 0xf0000000
+#define bMaskOFDM_D 0xffc00000
+#define bMaskCCK 0x3f3f3f3f
+#define bMask12Bits 0xfff
+
+/* for PutRFRegsetting & GetRFRegSetting BitMask */
+#if (RTL92SE_FPGA_VERIFY == 1)
+#define bRFRegOffsetMask 0xfff
+#else
+#define bRFRegOffsetMask 0xfffff
+#endif
+#define bEnable 0x1 /* Useless */
+#define bDisabl 0x0
+
+#define LeftAntenna 0x0 /* Useless */
+#define RightAntenna 0x1
+
+#define tCheckTxStatus 500 /* 500ms Useless */
+#define tUpdateRxCounter 100 /* 100ms */
+
+#define rateCCK 0 /* Useless */
+#define rateOFDM 1
+#define rateHT 2
+
+/* define Register-End */
+#define bPMAC_End 0x1ff /* Useless */
+#define bFPGAPHY0_End 0x8ff
+#define bFPGAPHY1_End 0x9ff
+#define bCCKPHY0_End 0xaff
+#define bOFDMPHY0_End 0xcff
+#define bOFDMPHY1_End 0xdff
+
+/* define max debug item in each debug page */
+/* define bMaxItem_FPGA_PHY0 0x9 */
+/* define bMaxItem_FPGA_PHY1 0x3 */
+/* define bMaxItem_PHY_11B 0x16 */
+/* define bMaxItem_OFDM_PHY0 0x29 */
+/* define bMaxItem_OFDM_PHY1 0x0 */
+
+#define bPMACControl 0x0 /* Useless */
+#define bWMACControl 0x1
+#define bWNICControl 0x2
+
+#define RCR_AAP BIT(0) /* accept all physical address */
+#define RCR_APM BIT(1) /* accept physical match */
+#define RCR_AM BIT(2) /* accept multicast */
+#define RCR_AB BIT(3) /* accept broadcast */
+#define RCR_ACRC32 BIT(5) /* accept error packet */
+#define RCR_9356SEL BIT(6)
+#define RCR_AICV BIT(12) /* Accept ICV error packet */
+#define RCR_RXFTH0 (BIT(13)|BIT(14)|BIT(15)) /* Rx FIFO threshold */
+#define RCR_ADF BIT(18) /* Accept Data(frame type) frame */
+#define RCR_ACF BIT(19) /* Accept control frame */
+#define RCR_AMF BIT(20) /* Accept management frame */
+#define RCR_ADD3 BIT(21)
+#define RCR_APWRMGT BIT(22) /* Accept power management packet */
+#define RCR_CBSSID BIT(23) /* Accept BSSID match packet */
+#define RCR_ENMARP BIT(28) /* enable mac auto reset phy */
+#define RCR_EnCS1 BIT(29) /* enable carrier sense method 1 */
+#define RCR_EnCS2 BIT(30) /* enable carrier sense method 2 */
+#define RCR_OnlyErlPkt BIT(31) /* Rx Early mode is performed for
+ * packet size greater than 1536 */
+
+/*--------------------------Define Parameters-------------------------------*/
+
+#endif /* __INC_HAL8192SPHYREG_H */
diff --git a/drivers/staging/r8188eu/include/rtw_p2p.h b/drivers/staging/r8188eu/include/rtw_p2p.h
new file mode 100644
index 000000000000..a3e3adc92b99
--- /dev/null
+++ b/drivers/staging/r8188eu/include/rtw_p2p.h
@@ -0,0 +1,135 @@
+/******************************************************************************
+ *
+ * Copyright(c) 2007 - 2011 Realtek Corporation. All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of version 2 of the GNU General Public License as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
+ * more details.
+ *
+ * You should have received a copy of the GNU General Public License along with
+ * this program; if not, write to the Free Software Foundation, Inc.,
+ * 51 Franklin Street, Fifth Floor, Boston, MA 02110, USA
+ *
+ *
+ ******************************************************************************/
+#ifndef __RTW_P2P_H_
+#define __RTW_P2P_H_
+
+#include <drv_types.h>
+
+u32 build_beacon_p2p_ie(struct wifidirect_info *pwdinfo, u8 *pbuf);
+u32 build_probe_resp_p2p_ie(struct wifidirect_info *pwdinfo, u8 *pbuf);
+u32 build_prov_disc_request_p2p_ie(struct wifidirect_info *pwdinfo,
+ u8 *pbuf, u8 *pssid, u8 ussidlen,
+ u8 *pdev_raddr);
+u32 build_assoc_resp_p2p_ie(struct wifidirect_info *pwdinfo,
+ u8 *pbuf, u8 status_code);
+u32 build_deauth_p2p_ie(struct wifidirect_info *pwdinfo, u8 *pbuf);
+u32 process_probe_req_p2p_ie(struct wifidirect_info *pwdinfo,
+ u8 *pframe, uint len);
+u32 process_assoc_req_p2p_ie(struct wifidirect_info *pwdinfo,
+ u8 *pframe, uint len, struct sta_info *psta);
+u32 process_p2p_devdisc_req(struct wifidirect_info *pwdinfo,
+ u8 *pframe, uint len);
+u32 process_p2p_devdisc_resp(struct wifidirect_info *pwdinfo,
+ u8 *pframe, uint len);
+u8 process_p2p_provdisc_req(struct wifidirect_info *pwdinfo,
+ u8 *pframe, uint len);
+u8 process_p2p_provdisc_resp(struct wifidirect_info *pwdinfo, u8 *pframe);
+u8 process_p2p_group_negotation_req(struct wifidirect_info *pwdinfo,
+ u8 *pframe, uint len);
+u8 process_p2p_group_negotation_resp(struct wifidirect_info *pwdinfo,
+ u8 *pframe, uint len);
+u8 process_p2p_group_negotation_confirm(struct wifidirect_info *pwdinfo,
+ u8 *pframe, uint len);
+u8 process_p2p_presence_req(struct wifidirect_info *pwdinfo, u8 *pframe,
+ uint len);
+void p2p_protocol_wk_hdl(struct adapter *padapter, int intcmdtype);
+void process_p2p_ps_ie(struct adapter *padapter, u8 *ies, u32 ielength);
+void p2p_ps_wk_hdl(struct adapter *padapter, u8 p2p_ps_state);
+u8 p2p_ps_wk_cmd(struct adapter *padapter, u8 p2p_ps_state, u8 enqueue);
+void reset_global_wifidirect_info(struct adapter *padapter);
+int rtw_init_wifi_display_info(struct adapter *padapter);
+void rtw_init_wifidirect_timers(struct adapter *padapter);
+void rtw_init_wifidirect_addrs(struct adapter *padapter, u8 *dev_addr,
+ u8 *iface_addr);
+void init_wifidirect_info(struct adapter *padapter, enum P2P_ROLE role);
+int rtw_p2p_enable(struct adapter *padapter, enum P2P_ROLE role);
+
+static inline void _rtw_p2p_set_state(struct wifidirect_info *wdinfo,
+ enum P2P_STATE state)
+{
+ if (wdinfo->p2p_state != state)
+ wdinfo->p2p_state = state;
+}
+
+static inline void _rtw_p2p_set_pre_state(struct wifidirect_info *wdinfo,
+ enum P2P_STATE state)
+{
+ if (wdinfo->pre_p2p_state != state)
+ wdinfo->pre_p2p_state = state;
+}
+
+static inline void _rtw_p2p_set_role(struct wifidirect_info *wdinfo,
+ enum P2P_ROLE role)
+{
+ if (wdinfo->role != role)
+ wdinfo->role = role;
+}
+
+static inline int _rtw_p2p_state(struct wifidirect_info *wdinfo)
+{
+ return wdinfo->p2p_state;
+}
+
+static inline int _rtw_p2p_pre_state(struct wifidirect_info *wdinfo)
+{
+ return wdinfo->pre_p2p_state;
+}
+
+static inline int _rtw_p2p_role(struct wifidirect_info *wdinfo)
+{
+ return wdinfo->role;
+}
+
+static inline bool _rtw_p2p_chk_state(struct wifidirect_info *wdinfo,
+ enum P2P_STATE state)
+{
+ return wdinfo->p2p_state == state;
+}
+
+static inline bool _rtw_p2p_chk_role(struct wifidirect_info *wdinfo,
+ enum P2P_ROLE role)
+{
+ return wdinfo->role == role;
+}
+
+#define rtw_p2p_set_state(wdinfo, state) _rtw_p2p_set_state(wdinfo, state)
+#define rtw_p2p_set_pre_state(wdinfo, state) \
+ _rtw_p2p_set_pre_state(wdinfo, state)
+#define rtw_p2p_set_role(wdinfo, role) _rtw_p2p_set_role(wdinfo, role)
+
+#define rtw_p2p_state(wdinfo) _rtw_p2p_state(wdinfo)
+#define rtw_p2p_pre_state(wdinfo) _rtw_p2p_pre_state(wdinfo)
+#define rtw_p2p_role(wdinfo) _rtw_p2p_role(wdinfo)
+#define rtw_p2p_chk_state(wdinfo, state) _rtw_p2p_chk_state(wdinfo, state)
+#define rtw_p2p_chk_role(wdinfo, role) _rtw_p2p_chk_role(wdinfo, role)
+
+#define rtw_p2p_findphase_ex_set(wdinfo, value) \
+ ((wdinfo)->find_phase_state_exchange_cnt = (value))
+
+/* is this find phase exchange for social channel scan? */
+#define rtw_p2p_findphase_ex_is_social(wdinfo) \
+((wdinfo)->find_phase_state_exchange_cnt >= P2P_FINDPHASE_EX_SOCIAL_FIRST)
+
+/* should we need find phase exchange anymore? */
+#define rtw_p2p_findphase_ex_is_needed(wdinfo) \
+ ((wdinfo)->find_phase_state_exchange_cnt < P2P_FINDPHASE_EX_MAX && \
+ (wdinfo)->find_phase_state_exchange_cnt != P2P_FINDPHASE_EX_NONE)
+
+#endif
diff --git a/drivers/staging/r8188eu/include/rtw_pwrctrl.h b/drivers/staging/r8188eu/include/rtw_pwrctrl.h
new file mode 100644
index 000000000000..3db33cd9fee7
--- /dev/null
+++ b/drivers/staging/r8188eu/include/rtw_pwrctrl.h
@@ -0,0 +1,282 @@
+/******************************************************************************
+ *
+ * Copyright(c) 2007 - 2012 Realtek Corporation. All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of version 2 of the GNU General Public License as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
+ * more details.
+ *
+ * You should have received a copy of the GNU General Public License along with
+ * this program; if not, write to the Free Software Foundation, Inc.,
+ * 51 Franklin Street, Fifth Floor, Boston, MA 02110, USA
+ *
+ *
+ ******************************************************************************/
+#ifndef __RTW_PWRCTRL_H_
+#define __RTW_PWRCTRL_H_
+
+#include <osdep_service.h>
+#include <drv_types.h>
+
+#define FW_PWR0 0
+#define FW_PWR1 1
+#define FW_PWR2 2
+#define FW_PWR3 3
+#define HW_PWR0 7
+#define HW_PWR1 6
+#define HW_PWR2 2
+#define HW_PWR3 0
+#define HW_PWR4 8
+
+#define FW_PWRMSK 0x7
+
+#define XMIT_ALIVE BIT(0)
+#define RECV_ALIVE BIT(1)
+#define CMD_ALIVE BIT(2)
+#define EVT_ALIVE BIT(3)
+
+enum power_mgnt {
+ PS_MODE_ACTIVE = 0,
+ PS_MODE_MIN,
+ PS_MODE_MAX,
+ PS_MODE_DTIM,
+ PS_MODE_VOIP,
+ PS_MODE_UAPSD_WMM,
+ PS_MODE_UAPSD,
+ PS_MODE_IBSS,
+ PS_MODE_WWLAN,
+ PM_Radio_Off,
+ PM_Card_Disable,
+ PS_MODE_NUM
+};
+
+/*
+ BIT[2:0] = HW state
+ BIT[3] = Protocol PS state, 0: register active state,
+ 1: register sleep state
+ BIT[4] = sub-state
+*/
+
+#define PS_DPS BIT(0)
+#define PS_LCLK (PS_DPS)
+#define PS_RF_OFF BIT(1)
+#define PS_ALL_ON BIT(2)
+#define PS_ST_ACTIVE BIT(3)
+
+#define PS_ISR_ENABLE BIT(4)
+#define PS_IMR_ENABLE BIT(5)
+#define PS_ACK BIT(6)
+#define PS_TOGGLE BIT(7)
+
+#define PS_STATE_MASK (0x0F)
+#define PS_STATE_HW_MASK (0x07)
+#define PS_SEQ_MASK (0xc0)
+
+#define PS_STATE(x) (PS_STATE_MASK & (x))
+#define PS_STATE_HW(x) (PS_STATE_HW_MASK & (x))
+#define PS_SEQ(x) (PS_SEQ_MASK & (x))
+
+#define PS_STATE_S0 (PS_DPS)
+#define PS_STATE_S1 (PS_LCLK)
+#define PS_STATE_S2 (PS_RF_OFF)
+#define PS_STATE_S3 (PS_ALL_ON)
+#define PS_STATE_S4 ((PS_ST_ACTIVE) | (PS_ALL_ON))
+
+#define PS_IS_RF_ON(x) ((x) & (PS_ALL_ON))
+#define PS_IS_ACTIVE(x) ((x) & (PS_ST_ACTIVE))
+#define CLR_PS_STATE(x) ((x) = ((x) & (0xF0)))
+
+struct reportpwrstate_parm {
+ unsigned char mode;
+ unsigned char state; /* the CPWM value */
+ unsigned short rsvd;
+};
+
+static inline void _init_pwrlock(struct semaphore *plock)
+{
+ sema_init(plock, 1);
+}
+
+static inline void _free_pwrlock(struct semaphore *plock)
+{
+}
+
+static inline void _enter_pwrlock(struct semaphore *plock)
+{
+ _rtw_down_sema(plock);
+}
+
+static inline void _exit_pwrlock(struct semaphore *plock)
+{
+ up(plock);
+}
+
+#define LPS_DELAY_TIME 1*HZ /* 1 sec */
+
+#define EXE_PWR_NONE 0x01
+#define EXE_PWR_IPS 0x02
+#define EXE_PWR_LPS 0x04
+
+/* RF state. */
+enum rt_rf_power_state {
+ rf_on, /* RF is on after RFSleep or RFOff */
+ rf_sleep, /* 802.11 Power Save mode */
+ rf_off, /* HW/SW Radio OFF or Inactive Power Save */
+ /* Add the new RF state above this line===== */
+ rf_max
+};
+
+/* RF Off Level for IPS or HW/SW radio off */
+#define RT_RF_OFF_LEVL_ASPM BIT(0) /* PCI ASPM */
+#define RT_RF_OFF_LEVL_CLK_REQ BIT(1) /* PCI clock request */
+#define RT_RF_OFF_LEVL_PCI_D3 BIT(2) /* PCI D3 mode */
+#define RT_RF_OFF_LEVL_HALT_NIC BIT(3) /* NIC halt, re-init hw param*/
+#define RT_RF_OFF_LEVL_FREE_FW BIT(4) /* FW free, re-download the FW*/
+#define RT_RF_OFF_LEVL_FW_32K BIT(5) /* FW in 32k */
+#define RT_RF_PS_LEVEL_ALWAYS_ASPM BIT(6) /* Always enable ASPM and Clock
+ * Req in initialization. */
+#define RT_RF_LPS_DISALBE_2R BIT(30) /* When LPS is on, disable 2R
+ * if no packet is RX or TX. */
+#define RT_RF_LPS_LEVEL_ASPM BIT(31) /* LPS with ASPM */
+
+#define RT_IN_PS_LEVEL(ppsc, _PS_FLAG) \
+ ((ppsc->cur_ps_level & _PS_FLAG) ? true : false)
+#define RT_CLEAR_PS_LEVEL(ppsc, _PS_FLAG) \
+ (ppsc->cur_ps_level &= (~(_PS_FLAG)))
+#define RT_SET_PS_LEVEL(ppsc, _PS_FLAG) \
+ (ppsc->cur_ps_level |= _PS_FLAG)
+
+enum _PS_BBRegBackup_ {
+ PSBBREG_RF0 = 0,
+ PSBBREG_RF1,
+ PSBBREG_RF2,
+ PSBBREG_AFE0,
+ PSBBREG_TOTALCNT
+};
+
+enum { /* for ips_mode */
+ IPS_NONE = 0,
+ IPS_NORMAL,
+ IPS_LEVEL_2,
+};
+
+struct pwrctrl_priv {
+ struct semaphore lock;
+ volatile u8 rpwm; /* requested power state for fw */
+ volatile u8 cpwm; /* fw current power state. updated when
+ * 1. read from HCPWM 2. driver lowers power level */
+ volatile u8 tog; /* toggling */
+ volatile u8 cpwm_tog; /* toggling */
+
+ u8 pwr_mode;
+ u8 smart_ps;
+ u8 bcn_ant_mode;
+
+ u32 alives;
+ struct work_struct cpwm_event;
+ u8 bpower_saving;
+
+ u8 b_hw_radio_off;
+ u8 reg_rfoff;
+ u8 reg_pdnmode; /* powerdown mode */
+ u32 rfoff_reason;
+
+ /* RF OFF Level */
+ u32 cur_ps_level;
+ u32 reg_rfps_level;
+ uint ips_enter_cnts;
+ uint ips_leave_cnts;
+
+ u8 ips_mode;
+ u8 ips_mode_req; /* used to accept the mode setting request,
+ * will update to ipsmode later */
+ uint bips_processing;
+ u32 ips_deny_time; /* will deny IPS when system time less than this */
+ u8 ps_processing; /* temp used to mark whether in rtw_ps_processor */
+
+ u8 bLeisurePs;
+ u8 LpsIdleCount;
+ u8 power_mgnt;
+ u8 bFwCurrentInPSMode;
+ u32 DelayLPSLastTimeStamp;
+ u8 btcoex_rfon;
+ s32 pnp_current_pwr_state;
+ u8 pnp_bstop_trx;
+
+ u8 bInternalAutoSuspend;
+ u8 bInSuspend;
+#ifdef CONFIG_BT_COEXIST
+ u8 bAutoResume;
+ u8 autopm_cnt;
+#endif
+ u8 bSupportRemoteWakeup;
+ struct timer_list pwr_state_check_timer;
+ int pwr_state_check_interval;
+ u8 pwr_state_check_cnts;
+
+ int ps_flag;
+
+ enum rt_rf_power_state rf_pwrstate;/* cur power state */
+ enum rt_rf_power_state change_rfpwrstate;
+
+ u8 wepkeymask;
+ u8 bHWPowerdown;/* if support hw power down */
+ u8 bHWPwrPindetect;
+ u8 bkeepfwalive;
+ u8 brfoffbyhw;
+ unsigned long PS_BBRegBackup[PSBBREG_TOTALCNT];
+};
+
+#define rtw_get_ips_mode_req(pwrctrlpriv) \
+ (pwrctrlpriv)->ips_mode_req
+
+#define rtw_ips_mode_req(pwrctrlpriv, ips_mode) \
+ ((pwrctrlpriv)->ips_mode_req = (ips_mode))
+
+#define RTW_PWR_STATE_CHK_INTERVAL 2000
+
+#define _rtw_set_pwr_state_check_timer(pwrctrlpriv, ms) \
+ do { \
+ _set_timer(&(pwrctrlpriv)->pwr_state_check_timer, (ms)); \
+ } while (0)
+
+#define rtw_set_pwr_state_check_timer(pwrctrl) \
+ _rtw_set_pwr_state_check_timer((pwrctrl), \
+ (pwrctrl)->pwr_state_check_interval)
+
+void rtw_init_pwrctrl_priv(struct adapter *adapter);
+void rtw_free_pwrctrl_priv(struct adapter *adapter);
+
+void rtw_set_ps_mode(struct adapter *adapter, u8 ps_mode, u8 smart_ps,
+ u8 bcn_ant_mode);
+void rtw_set_rpwm(struct adapter *adapter, u8 val8);
+void LeaveAllPowerSaveMode(struct adapter *adapter);
+void ips_enter(struct adapter *padapter);
+int ips_leave(struct adapter *padapter);
+
+void rtw_ps_processor(struct adapter *padapter);
+
+enum rt_rf_power_state RfOnOffDetect(struct adapter *iadapter);
+
+s32 LPS_RF_ON_check(struct adapter *adapter, u32 delay_ms);
+void LPS_Enter(struct adapter *adapter);
+void LPS_Leave(struct adapter *adapter);
+
+u8 rtw_interface_ps_func(struct adapter *adapter,
+ enum hal_intf_ps_func efunc_id, u8 *val);
+void rtw_set_ips_deny(struct adapter *adapter, u32 ms);
+int _rtw_pwr_wakeup(struct adapter *adapter, u32 ips_defer_ms,
+ const char *caller);
+#define rtw_pwr_wakeup(adapter) \
+ _rtw_pwr_wakeup(adapter, RTW_PWR_STATE_CHK_INTERVAL, __func__)
+#define rtw_pwr_wakeup_ex(adapter, ips_deffer_ms) \
+ _rtw_pwr_wakeup(adapter, ips_deffer_ms, __func__)
+int rtw_pm_set_ips(struct adapter *adapter, u8 mode);
+int rtw_pm_set_lps(struct adapter *adapter, u8 mode);
+
+#endif /* __RTL871X_PWRCTRL_H_ */
diff --git a/drivers/staging/r8188eu/include/rtw_qos.h b/drivers/staging/r8188eu/include/rtw_qos.h
new file mode 100644
index 000000000000..bbee1ddc00bb
--- /dev/null
+++ b/drivers/staging/r8188eu/include/rtw_qos.h
@@ -0,0 +1,30 @@
+/******************************************************************************
+ *
+ * Copyright(c) 2007 - 2011 Realtek Corporation. All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of version 2 of the GNU General Public License as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
+ * more details.
+ *
+ * You should have received a copy of the GNU General Public License along with
+ * this program; if not, write to the Free Software Foundation, Inc.,
+ * 51 Franklin Street, Fifth Floor, Boston, MA 02110, USA
+ *
+ *
+ ******************************************************************************/
+#ifndef _RTW_QOS_H_
+#define _RTW_QOS_H_
+
+#include <osdep_service.h>
+
+struct qos_priv {
+ unsigned int qos_option; /* bit mask option: u-apsd,
+ * s-apsd, ts, block ack... */
+};
+
+#endif /* _RTL871X_QOS_H_ */
diff --git a/drivers/staging/r8188eu/include/rtw_recv.h b/drivers/staging/r8188eu/include/rtw_recv.h
new file mode 100644
index 000000000000..bc097ed7f966
--- /dev/null
+++ b/drivers/staging/r8188eu/include/rtw_recv.h
@@ -0,0 +1,473 @@
+/******************************************************************************
+ *
+ * Copyright(c) 2007 - 2012 Realtek Corporation. All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of version 2 of the GNU General Public License as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
+ * more details.
+ *
+ * You should have received a copy of the GNU General Public License along with
+ * this program; if not, write to the Free Software Foundation, Inc.,
+ * 51 Franklin Street, Fifth Floor, Boston, MA 02110, USA
+ *
+ *
+ ******************************************************************************/
+#ifndef _RTW_RECV_H_
+#define _RTW_RECV_H_
+
+#include <osdep_service.h>
+#include <drv_types.h>
+
+#define NR_RECVFRAME 256
+
+#define RXFRAME_ALIGN 8
+#define RXFRAME_ALIGN_SZ (1<<RXFRAME_ALIGN)
+
+#define MAX_RXFRAME_CNT 512
+#define MAX_RX_NUMBLKS (32)
+#define RECVFRAME_HDR_ALIGN 128
+
+#define SNAP_SIZE sizeof(struct ieee80211_snap_hdr)
+
+#define MAX_SUBFRAME_COUNT 64
+
+/* for Rx reordering buffer control */
+struct recv_reorder_ctrl {
+ struct adapter *padapter;
+ u8 enable;
+ u16 indicate_seq;/* wstart_b, init_value=0xffff */
+ u16 wend_b;
+ u8 wsize_b;
+ struct __queue pending_recvframe_queue;
+ struct timer_list reordering_ctrl_timer;
+};
+
+struct stainfo_rxcache {
+ u16 tid_rxseq[16];
+/*
+ unsigned short tid0_rxseq;
+ unsigned short tid1_rxseq;
+ unsigned short tid2_rxseq;
+ unsigned short tid3_rxseq;
+ unsigned short tid4_rxseq;
+ unsigned short tid5_rxseq;
+ unsigned short tid6_rxseq;
+ unsigned short tid7_rxseq;
+ unsigned short tid8_rxseq;
+ unsigned short tid9_rxseq;
+ unsigned short tid10_rxseq;
+ unsigned short tid11_rxseq;
+ unsigned short tid12_rxseq;
+ unsigned short tid13_rxseq;
+ unsigned short tid14_rxseq;
+ unsigned short tid15_rxseq;
+*/
+};
+
+struct smooth_rssi_data {
+ u32 elements[100]; /* array to store values */
+ u32 index; /* index to current array to store */
+ u32 total_num; /* num of valid elements */
+ u32 total_val; /* sum of valid elements */
+};
+
+struct signal_stat {
+ u8 update_req; /* used to indicate */
+ u8 avg_val; /* avg of valid elements */
+ u32 total_num; /* num of valid elements */
+ u32 total_val; /* sum of valid elements */
+};
+#define MAX_PATH_NUM_92CS 3
+struct phy_info {
+ u8 RxPWDBAll;
+ u8 SignalQuality; /* in 0-100 index. */
+ u8 RxMIMOSignalQuality[MAX_PATH_NUM_92CS]; /* EVM */
+ u8 RxMIMOSignalStrength[MAX_PATH_NUM_92CS];/* in 0~100 index */
+ s8 RxPower; /* in dBm Translate from PWdB */
+/* Real power in dBm for this packet, no beautification and aggregation.
+ * Keep this raw info to be used for the other procedures. */
+ s8 recvpower;
+ u8 BTRxRSSIPercentage;
+ u8 SignalStrength; /* in 0-100 index. */
+ u8 RxPwr[MAX_PATH_NUM_92CS];/* per-path's pwdb */
+ u8 RxSNR[MAX_PATH_NUM_92CS];/* per-path's SNR */
+};
+
+struct rx_pkt_attrib {
+ u16 pkt_len;
+ u8 physt;
+ u8 drvinfo_sz;
+ u8 shift_sz;
+ u8 hdrlen; /* the WLAN Header Len */
+ u8 to_fr_ds;
+ u8 amsdu;
+ u8 qos;
+ u8 priority;
+ u8 pw_save;
+ u8 mdata;
+ u16 seq_num;
+ u8 frag_num;
+ u8 mfrag;
+ u8 order;
+ u8 privacy; /* in frame_ctrl field */
+ u8 bdecrypted;
+ u8 encrypt; /* when 0 indicate no encrypt. when non-zero,
+ * indicate the encrypt algorith */
+ u8 iv_len;
+ u8 icv_len;
+ u8 crc_err;
+ u8 icv_err;
+
+ u16 eth_type;
+
+ u8 dst[ETH_ALEN];
+ u8 src[ETH_ALEN];
+ u8 ta[ETH_ALEN];
+ u8 ra[ETH_ALEN];
+ u8 bssid[ETH_ALEN];
+
+ u8 ack_policy;
+
+ u8 key_index;
+
+ u8 mcs_rate;
+ u8 rxht;
+ u8 sgi;
+ u8 pkt_rpt_type;
+ u32 MacIDValidEntry[2]; /* 64 bits present 64 entry. */
+
+ struct phy_info phy_info;
+};
+
+/* These definition is used for Rx packet reordering. */
+#define SN_LESS(a, b) (((a - b) & 0x800) != 0)
+#define SN_EQUAL(a, b) (a == b)
+#define REORDER_WAIT_TIME (50) /* (ms) */
+
+#define RECVBUFF_ALIGN_SZ 8
+
+#define RXDESC_SIZE 24
+#define RXDESC_OFFSET RXDESC_SIZE
+
+struct recv_stat {
+ __le32 rxdw0;
+ __le32 rxdw1;
+ __le32 rxdw2;
+ __le32 rxdw3;
+ __le32 rxdw4;
+ __le32 rxdw5;
+};
+
+#define EOR BIT(30)
+
+/*
+accesser of recv_priv: rtw_recv_entry(dispatch / passive level);
+recv_thread(passive) ; returnpkt(dispatch)
+; halt(passive) ;
+
+using enter_critical section to protect
+*/
+struct recv_priv {
+ spinlock_t lock;
+ struct __queue free_recv_queue;
+ struct __queue recv_pending_queue;
+ struct __queue uc_swdec_pending_queue;
+ u8 *pallocated_frame_buf;
+ u8 *precv_frame_buf;
+ uint free_recvframe_cnt;
+ struct adapter *adapter;
+ u32 bIsAnyNonBEPkts;
+ u64 rx_bytes;
+ u64 rx_pkts;
+ u64 rx_drop;
+ u64 last_rx_bytes;
+
+ uint rx_icv_err;
+ uint rx_largepacket_crcerr;
+ uint rx_smallpacket_crcerr;
+ uint rx_middlepacket_crcerr;
+ struct semaphore allrxreturnevt;
+ uint ff_hwaddr;
+ u8 rx_pending_cnt;
+
+ struct tasklet_struct irq_prepare_beacon_tasklet;
+ struct tasklet_struct recv_tasklet;
+ struct sk_buff_head free_recv_skb_queue;
+ struct sk_buff_head rx_skb_queue;
+ u8 *pallocated_recv_buf;
+ u8 *precv_buf; /* 4 alignment */
+ struct __queue free_recv_buf_queue;
+ u32 free_recv_buf_queue_cnt;
+ /* For display the phy informatiom */
+ u8 is_signal_dbg; /* for debug */
+ u8 signal_strength_dbg; /* for debug */
+ s8 rssi;
+ s8 rxpwdb;
+ u8 signal_strength;
+ u8 signal_qual;
+ u8 noise;
+ int RxSNRdB[2];
+ s8 RxRssi[2];
+ int FalseAlmCnt_all;
+
+ struct timer_list signal_stat_timer;
+ u32 signal_stat_sampling_interval;
+ struct signal_stat signal_qual_data;
+ struct signal_stat signal_strength_data;
+};
+
+#define rtw_set_signal_stat_timer(recvpriv) \
+ _set_timer(&(recvpriv)->signal_stat_timer, \
+ (recvpriv)->signal_stat_sampling_interval)
+
+struct sta_recv_priv {
+ spinlock_t lock;
+ int option;
+ struct __queue defrag_q; /* keeping the fragment frame until defrag */
+ struct stainfo_rxcache rxcache;
+};
+
+struct recv_buf {
+ struct list_head list;
+ spinlock_t recvbuf_lock;
+ u32 ref_cnt;
+ struct adapter *adapter;
+ u8 *pbuf;
+ u8 *pallocated_buf;
+ u32 len;
+ u8 *phead;
+ u8 *pdata;
+ u8 *ptail;
+ u8 *pend;
+ struct urb *purb;
+ dma_addr_t dma_transfer_addr; /* (in) dma addr for transfer_buffer */
+ u32 alloc_sz;
+ u8 irp_pending;
+ int transfer_len;
+ struct sk_buff *pskb;
+ u8 reuse;
+};
+
+/*
+ head ----->
+
+ data ----->
+
+ payload
+
+ tail ----->
+
+ end ----->
+
+ len = (unsigned int )(tail - data);
+
+*/
+struct recv_frame {
+ struct list_head list;
+ struct sk_buff *pkt;
+ struct sk_buff *pkt_newalloc;
+ struct adapter *adapter;
+ u8 fragcnt;
+ int frame_tag;
+ struct rx_pkt_attrib attrib;
+ uint len;
+ u8 *rx_head;
+ u8 *rx_data;
+ u8 *rx_tail;
+ u8 *rx_end;
+ void *precvbuf;
+ struct sta_info *psta;
+ /* for A-MPDU Rx reordering buffer control */
+ struct recv_reorder_ctrl *preorder_ctrl;
+};
+
+struct recv_frame *_rtw_alloc_recvframe(struct __queue *pfree_recv_queue);
+struct recv_frame *rtw_alloc_recvframe(struct __queue *pfree_recv_queue);
+void rtw_init_recvframe(struct recv_frame *precvframe,
+ struct recv_priv *precvpriv);
+int rtw_free_recvframe(struct recv_frame *precvframe,
+ struct __queue *pfree_recv_queue);
+#define rtw_dequeue_recvframe(queue) rtw_alloc_recvframe(queue)
+int _rtw_enqueue_recvframe(struct recv_frame *precvframe, struct __queue *queue);
+int rtw_enqueue_recvframe(struct recv_frame *precvframe, struct __queue *queue);
+void rtw_free_recvframe_queue(struct __queue *pframequeue,
+ struct __queue *pfree_recv_queue);
+u32 rtw_free_uc_swdec_pending_queue(struct adapter *adapter);
+int rtw_enqueue_recvbuf_to_head(struct recv_buf *buf, struct __queue *queue);
+int rtw_enqueue_recvbuf(struct recv_buf *precvbuf, struct __queue *queue);
+struct recv_buf *rtw_dequeue_recvbuf(struct __queue *queue);
+
+void rtw_reordering_ctrl_timeout_handler(void *pcontext);
+
+static inline u8 *get_rxmem(struct recv_frame *precvframe)
+{
+ /* always return rx_head... */
+ if (precvframe == NULL)
+ return NULL;
+ return precvframe->rx_head;
+}
+
+static inline u8 *get_rx_status(struct recv_frame *precvframe)
+{
+ return get_rxmem(precvframe);
+}
+
+static inline u8 *get_recvframe_data(struct recv_frame *precvframe)
+{
+ /* always return rx_data */
+ if (precvframe == NULL)
+ return NULL;
+
+ return precvframe->rx_data;
+}
+
+static inline u8 *recvframe_push(struct recv_frame *precvframe, int sz)
+{
+ /* append data before rx_data */
+
+ /* add data to the start of recv_frame
+ *
+ * This function extends the used data area of the recv_frame at the buffer
+ * start. rx_data must be still larger than rx_head, after pushing.
+ */
+ if (precvframe == NULL)
+ return NULL;
+ precvframe->rx_data -= sz ;
+ if (precvframe->rx_data < precvframe->rx_head) {
+ precvframe->rx_data += sz;
+ return NULL;
+ }
+ precvframe->len += sz;
+ return precvframe->rx_data;
+}
+
+static inline u8 *recvframe_pull(struct recv_frame *precvframe, int sz)
+{
+ /* rx_data += sz; move rx_data sz bytes hereafter */
+
+ /* used for extract sz bytes from rx_data, update rx_data and return
+ * the updated rx_data to the caller */
+
+ if (precvframe == NULL)
+ return NULL;
+ precvframe->rx_data += sz;
+ if (precvframe->rx_data > precvframe->rx_tail) {
+ precvframe->rx_data -= sz;
+ return NULL;
+ }
+ precvframe->len -= sz;
+ return precvframe->rx_data;
+}
+
+static inline u8 *recvframe_put(struct recv_frame *precvframe, int sz)
+{
+ /* used for append sz bytes from ptr to rx_tail, update rx_tail
+ * and return the updated rx_tail to the caller */
+ /* after putting, rx_tail must be still larger than rx_end. */
+
+ if (precvframe == NULL)
+ return NULL;
+
+ precvframe->rx_tail += sz;
+
+ if (precvframe->rx_tail > precvframe->rx_end) {
+ precvframe->rx_tail -= sz;
+ return NULL;
+ }
+ precvframe->len += sz;
+ return precvframe->rx_tail;
+}
+
+static inline u8 *recvframe_pull_tail(struct recv_frame *precvframe, int sz)
+{
+ /* rmv data from rx_tail (by yitsen) */
+
+ /* used for extract sz bytes from rx_end, update rx_end and return
+ * the updated rx_end to the caller */
+ /* after pulling, rx_end must be still larger than rx_data. */
+
+ if (precvframe == NULL)
+ return NULL;
+ precvframe->rx_tail -= sz;
+ if (precvframe->rx_tail < precvframe->rx_data) {
+ precvframe->rx_tail += sz;
+ return NULL;
+ }
+ precvframe->len -= sz;
+ return precvframe->rx_tail;
+}
+
+static inline unsigned char *get_rxbuf_desc(struct recv_frame *precvframe)
+{
+ unsigned char *buf_desc;
+
+ if (precvframe == NULL)
+ return NULL;
+ return buf_desc;
+}
+
+static inline struct recv_frame *rxmem_to_recvframe(u8 *rxmem)
+{
+ /* due to the design of 2048 bytes alignment of recv_frame,
+ * we can reference the struct recv_frame */
+ /* from any given member of recv_frame. */
+ /* rxmem indicates the any member/address in recv_frame */
+
+ return (struct recv_frame *)(((size_t)rxmem >> RXFRAME_ALIGN) << RXFRAME_ALIGN);
+}
+
+static inline struct recv_frame *pkt_to_recvframe(struct sk_buff *pkt)
+{
+ u8 *buf_star;
+ struct recv_frame *precv_frame;
+ precv_frame = rxmem_to_recvframe((unsigned char *)buf_star);
+
+ return precv_frame;
+}
+
+static inline u8 *pkt_to_recvmem(struct sk_buff *pkt)
+{
+ /* return the rx_head */
+
+ struct recv_frame *precv_frame = pkt_to_recvframe(pkt);
+
+ return precv_frame->rx_head;
+}
+
+static inline u8 *pkt_to_recvdata(struct sk_buff *pkt)
+{
+ /* return the rx_data */
+
+ struct recv_frame *precv_frame = pkt_to_recvframe(pkt);
+
+ return precv_frame->rx_data;
+}
+
+static inline int get_recvframe_len(struct recv_frame *precvframe)
+{
+ return precvframe->len;
+}
+
+static inline s32 translate_percentage_to_dbm(u32 sig_stren_index)
+{
+ s32 power; /* in dBm. */
+
+ /* Translate to dBm (x=0.5y-95). */
+ power = (s32)((sig_stren_index + 1) >> 1);
+ power -= 95;
+
+ return power;
+}
+
+struct sta_info;
+
+void _rtw_init_sta_recv_priv(struct sta_recv_priv *psta_recvpriv);
+
+void mgt_dispatcher(struct adapter *padapter, struct recv_frame *precv_frame);
+
+#endif
diff --git a/drivers/staging/r8188eu/include/rtw_rf.h b/drivers/staging/r8188eu/include/rtw_rf.h
new file mode 100644
index 000000000000..d4415e8115b2
--- /dev/null
+++ b/drivers/staging/r8188eu/include/rtw_rf.h
@@ -0,0 +1,145 @@
+/******************************************************************************
+ *
+ * Copyright(c) 2007 - 2011 Realtek Corporation. All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of version 2 of the GNU General Public License as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
+ * more details.
+ *
+ * You should have received a copy of the GNU General Public License along with
+ * this program; if not, write to the Free Software Foundation, Inc.,
+ * 51 Franklin Street, Fifth Floor, Boston, MA 02110, USA
+ *
+ *
+ ******************************************************************************/
+#ifndef __RTW_RF_H_
+#define __RTW_RF_H_
+
+#include <rtw_cmd.h>
+
+#define OFDM_PHY 1
+#define MIXED_PHY 2
+#define CCK_PHY 3
+
+#define NumRates (13)
+
+/* slot time for 11g */
+#define SHORT_SLOT_TIME 9
+#define NON_SHORT_SLOT_TIME 20
+
+#define RTL8711_RF_MAX_SENS 6
+#define RTL8711_RF_DEF_SENS 4
+
+/* We now define the following channels as the max channels in each
+ * channel plan. */
+/* 2G, total 14 chnls */
+/* {1,2,3,4,5,6,7,8,9,10,11,12,13,14} */
+#define MAX_CHANNEL_NUM_2G 14
+#define MAX_CHANNEL_NUM 14 /* 2.4 GHz only */
+
+#define NUM_REGULATORYS 1
+
+/* Country codes */
+#define USA 0x555320
+#define EUROPE 0x1 /* temp, should be provided later */
+#define JAPAN 0x2 /* temp, should be provided later */
+
+struct regulatory_class {
+ u32 starting_freq; /* MHz, */
+ u8 channel_set[MAX_CHANNEL_NUM];
+ u8 channel_cck_power[MAX_CHANNEL_NUM]; /* dbm */
+ u8 channel_ofdm_power[MAX_CHANNEL_NUM]; /* dbm */
+ u8 txpower_limit; /* dbm */
+ u8 channel_spacing; /* MHz */
+ u8 modem;
+};
+
+enum capability {
+ cESS = 0x0001,
+ cIBSS = 0x0002,
+ cPollable = 0x0004,
+ cPollReq = 0x0008,
+ cPrivacy = 0x0010,
+ cShortPreamble = 0x0020,
+ cPBCC = 0x0040,
+ cChannelAgility = 0x0080,
+ cSpectrumMgnt = 0x0100,
+ cQos = 0x0200, /* For HCCA, use with CF-Pollable
+ * and CF-PollReq */
+ cShortSlotTime = 0x0400,
+ cAPSD = 0x0800,
+ cRM = 0x1000, /* RRM (Radio Request Measurement) */
+ cDSSS_OFDM = 0x2000,
+ cDelayedBA = 0x4000,
+ cImmediateBA = 0x8000,
+};
+
+enum _REG_PREAMBLE_MODE {
+ PREAMBLE_LONG = 1,
+ PREAMBLE_AUTO = 2,
+ PREAMBLE_SHORT = 3,
+};
+
+enum _RTL8712_RF_MIMO_CONFIG_ {
+ RTL8712_RFCONFIG_1T = 0x10,
+ RTL8712_RFCONFIG_2T = 0x20,
+ RTL8712_RFCONFIG_1R = 0x01,
+ RTL8712_RFCONFIG_2R = 0x02,
+ RTL8712_RFCONFIG_1T1R = 0x11,
+ RTL8712_RFCONFIG_1T2R = 0x12,
+ RTL8712_RFCONFIG_TURBO = 0x92,
+ RTL8712_RFCONFIG_2T2R = 0x22
+};
+
+enum rf90_radio_path {
+ RF90_PATH_A = 0, /* Radio Path A */
+ RF90_PATH_B = 1, /* Radio Path B */
+ RF90_PATH_C = 2, /* Radio Path C */
+ RF90_PATH_D = 3 /* Radio Path D */
+};
+
+/* Bandwidth Offset */
+#define HAL_PRIME_CHNL_OFFSET_DONT_CARE 0
+#define HAL_PRIME_CHNL_OFFSET_LOWER 1
+#define HAL_PRIME_CHNL_OFFSET_UPPER 2
+
+/* Represent Channel Width in HT Capabilities */
+/* */
+enum ht_channel_width {
+ HT_CHANNEL_WIDTH_20 = 0,
+ HT_CHANNEL_WIDTH_40 = 1,
+ HT_CHANNEL_WIDTH_80 = 2,
+ HT_CHANNEL_WIDTH_160 = 3,
+ HT_CHANNEL_WIDTH_10 = 4,
+};
+
+/* */
+/* Represent Extension Channel Offset in HT Capabilities */
+/* This is available only in 40Mhz mode. */
+/* */
+enum ht_extchnl_offset {
+ HT_EXTCHNL_OFFSET_NO_EXT = 0,
+ HT_EXTCHNL_OFFSET_UPPER = 1,
+ HT_EXTCHNL_OFFSET_NO_DEF = 2,
+ HT_EXTCHNL_OFFSET_LOWER = 3,
+};
+
+/* 2007/11/15 MH Define different RF type. */
+enum rt_rf_type_def {
+ RF_1T2R = 0,
+ RF_2T4R = 1,
+ RF_2T2R = 2,
+ RF_1T1R = 3,
+ RF_2T2R_GREEN = 4,
+ RF_819X_MAX_TYPE = 5,
+};
+
+u32 rtw_ch2freq(u32 ch);
+u32 rtw_freq2ch(u32 freq);
+
+#endif /* _RTL8711_RF_H_ */
diff --git a/drivers/staging/r8188eu/include/rtw_security.h b/drivers/staging/r8188eu/include/rtw_security.h
new file mode 100644
index 000000000000..c720ed1117db
--- /dev/null
+++ b/drivers/staging/r8188eu/include/rtw_security.h
@@ -0,0 +1,382 @@
+/******************************************************************************
+ *
+ * Copyright(c) 2007 - 2011 Realtek Corporation. All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of version 2 of the GNU General Public License as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
+ * more details.
+ *
+ * You should have received a copy of the GNU General Public License along with
+ * this program; if not, write to the Free Software Foundation, Inc.,
+ * 51 Franklin Street, Fifth Floor, Boston, MA 02110, USA
+ *
+ *
+ ******************************************************************************/
+#ifndef __RTW_SECURITY_H_
+#define __RTW_SECURITY_H_
+
+#include <osdep_service.h>
+#include <drv_types.h>
+
+#define _NO_PRIVACY_ 0x0
+#define _WEP40_ 0x1
+#define _TKIP_ 0x2
+#define _TKIP_WTMIC_ 0x3
+#define _AES_ 0x4
+#define _WEP104_ 0x5
+#define _WEP_WPA_MIXED_ 0x07 /* WEP + WPA */
+#define _SMS4_ 0x06
+
+#define is_wep_enc(alg) (((alg) == _WEP40_) || ((alg) == _WEP104_))
+
+#define _WPA_IE_ID_ 0xdd
+#define _WPA2_IE_ID_ 0x30
+
+#define SHA256_MAC_LEN 32
+#define AES_BLOCK_SIZE 16
+#define AES_PRIV_SIZE (4 * 44)
+
+enum {
+ ENCRYP_PROTOCOL_OPENSYS, /* open system */
+ ENCRYP_PROTOCOL_WEP, /* WEP */
+ ENCRYP_PROTOCOL_WPA, /* WPA */
+ ENCRYP_PROTOCOL_WPA2, /* WPA2 */
+ ENCRYP_PROTOCOL_WAPI, /* WAPI: Not support in this version */
+ ENCRYP_PROTOCOL_MAX
+};
+
+#ifndef Ndis802_11AuthModeWPA2
+#define Ndis802_11AuthModeWPA2 (Ndis802_11AuthModeWPANone + 1)
+#endif
+
+#ifndef Ndis802_11AuthModeWPA2PSK
+#define Ndis802_11AuthModeWPA2PSK (Ndis802_11AuthModeWPANone + 2)
+#endif
+
+union pn48 {
+ u64 val;
+
+#ifdef __LITTLE_ENDIAN
+ struct {
+ u8 TSC0;
+ u8 TSC1;
+ u8 TSC2;
+ u8 TSC3;
+ u8 TSC4;
+ u8 TSC5;
+ u8 TSC6;
+ u8 TSC7;
+ } _byte_;
+
+#elif defined(__BIG_ENDIAN)
+
+ struct {
+ u8 TSC7;
+ u8 TSC6;
+ u8 TSC5;
+ u8 TSC4;
+ u8 TSC3;
+ u8 TSC2;
+ u8 TSC1;
+ u8 TSC0;
+ } _byte_;
+#endif
+};
+
+union Keytype {
+ u8 skey[16];
+ u32 lkey[4];
+};
+
+struct rt_pmkid_list {
+ u8 bUsed;
+ u8 Bssid[6];
+ u8 PMKID[16];
+ u8 SsidBuf[33];
+ u8 *ssid_octet;
+ u16 ssid_length;
+};
+
+struct security_priv {
+ u32 dot11AuthAlgrthm; /* 802.11 auth, could be open,
+ * shared, 8021x and authswitch */
+ u32 dot11PrivacyAlgrthm; /* This specify the privacy for
+ * shared auth. algorithm. */
+ /* WEP */
+ u32 dot11PrivacyKeyIndex; /* this is only valid for legendary
+ * wep, 0~3 for key id.(tx key index) */
+ union Keytype dot11DefKey[4]; /* this is only valid for def. key */
+ u32 dot11DefKeylen[4];
+ u32 dot118021XGrpPrivacy; /* This specify the privacy algthm.
+ * used for Grp key */
+ u32 dot118021XGrpKeyid; /* key id used for Grp Key
+ * ( tx key index) */
+ union Keytype dot118021XGrpKey[4]; /* 802.1x Group Key,
+ * for inx0 and inx1 */
+ union Keytype dot118021XGrptxmickey[4];
+ union Keytype dot118021XGrprxmickey[4];
+ union pn48 dot11Grptxpn; /* PN48 used for Grp Key xmit.*/
+ union pn48 dot11Grprxpn; /* PN48 used for Grp Key recv.*/
+#ifdef CONFIG_88EU_AP_MODE
+ /* extend security capabilities for AP_MODE */
+ unsigned int dot8021xalg;/* 0:disable, 1:psk, 2:802.1x */
+ unsigned int wpa_psk;/* 0:disable, bit(0): WPA, bit(1):WPA2 */
+ unsigned int wpa_group_cipher;
+ unsigned int wpa2_group_cipher;
+ unsigned int wpa_pairwise_cipher;
+ unsigned int wpa2_pairwise_cipher;
+#endif
+ u8 wps_ie[MAX_WPS_IE_LEN];/* added in assoc req */
+ int wps_ie_len;
+ u8 binstallGrpkey;
+ u8 busetkipkey;
+ u8 bcheck_grpkey;
+ u8 bgrpkey_handshake;
+ s32 sw_encrypt;/* from registry_priv */
+ s32 sw_decrypt;/* from registry_priv */
+ s32 hw_decrypted;/* if the rx packets is hw_decrypted==false,i
+ * it means the hw has not been ready. */
+
+ /* keeps the auth_type & enc_status from upper layer
+ * ioctl(wpa_supplicant or wzc) */
+ u32 ndisauthtype; /* NDIS_802_11_AUTHENTICATION_MODE */
+ u32 ndisencryptstatus; /* NDIS_802_11_ENCRYPTION_STATUS */
+ struct wlan_bssid_ex sec_bss; /* for joinbss (h2c buffer) usage */
+ struct ndis_802_11_wep ndiswep;
+ u8 assoc_info[600];
+ u8 szofcapability[256]; /* for wpa2 usage */
+ u8 oidassociation[512]; /* for wpa/wpa2 usage */
+ u8 authenticator_ie[256]; /* store ap security information element */
+ u8 supplicant_ie[256]; /* store sta security information element */
+
+ /* for tkip countermeasure */
+ u32 last_mic_err_time;
+ u8 btkip_countermeasure;
+ u8 btkip_wait_report;
+ u32 btkip_countermeasure_time;
+
+ /* */
+ /* For WPA2 Pre-Authentication. */
+ /* */
+ struct rt_pmkid_list PMKIDList[NUM_PMKID_CACHE];
+ u8 PMKIDIndex;
+ u8 bWepDefaultKeyIdxSet;
+};
+
+#if LINUX_VERSION_CODE <= KERNEL_VERSION(5, 8, 0)
+struct sha256_state {
+ u64 length;
+ u32 state[8], curlen;
+ u8 buf[64];
+};
+#endif
+
+#define GET_ENCRY_ALGO(psecuritypriv, psta, encry_algo, bmcst) \
+do { \
+ switch (psecuritypriv->dot11AuthAlgrthm) { \
+ case dot11AuthAlgrthm_Open: \
+ case dot11AuthAlgrthm_Shared: \
+ case dot11AuthAlgrthm_Auto: \
+ encry_algo = (u8)psecuritypriv->dot11PrivacyAlgrthm; \
+ break; \
+ case dot11AuthAlgrthm_8021X: \
+ if (bmcst) \
+ encry_algo = (u8)psecuritypriv->dot118021XGrpPrivacy;\
+ else \
+ encry_algo = (u8)psta->dot118021XPrivacy; \
+ break; \
+ case dot11AuthAlgrthm_WAPI: \
+ encry_algo = (u8)psecuritypriv->dot11PrivacyAlgrthm; \
+ break; \
+ } \
+} while (0)
+
+#define SET_ICE_IV_LEN(iv_len, icv_len, encrypt) \
+do { \
+ switch (encrypt) { \
+ case _WEP40_: \
+ case _WEP104_: \
+ iv_len = 4; \
+ icv_len = 4; \
+ break; \
+ case _TKIP_: \
+ iv_len = 8; \
+ icv_len = 4; \
+ break; \
+ case _AES_: \
+ iv_len = 8; \
+ icv_len = 8; \
+ break; \
+ case _SMS4_: \
+ iv_len = 18; \
+ icv_len = 16; \
+ break; \
+ default: \
+ iv_len = 0; \
+ icv_len = 0; \
+ break; \
+ } \
+} while (0)
+
+#define GET_TKIP_PN(iv, dot11txpn) \
+do { \
+ dot11txpn._byte_.TSC0 = iv[2]; \
+ dot11txpn._byte_.TSC1 = iv[0]; \
+ dot11txpn._byte_.TSC2 = iv[4]; \
+ dot11txpn._byte_.TSC3 = iv[5]; \
+ dot11txpn._byte_.TSC4 = iv[6]; \
+ dot11txpn._byte_.TSC5 = iv[7]; \
+} while (0)
+
+#define ROL32(A, n) (((A) << (n)) | (((A)>>(32-(n))) & ((1UL << (n)) - 1)))
+#define ROR32(A, n) ROL32((A), 32-(n))
+
+struct mic_data {
+ u32 K0, K1; /* Key */
+ u32 L, R; /* Current state */
+ u32 M; /* Message accumulator (single word) */
+ u32 nBytesInM; /* # bytes in M */
+};
+
+extern const u32 Te0[256];
+extern const u32 Te1[256];
+extern const u32 Te2[256];
+extern const u32 Te3[256];
+extern const u32 Te4[256];
+extern const u32 Td0[256];
+extern const u32 Td1[256];
+extern const u32 Td2[256];
+extern const u32 Td3[256];
+extern const u32 Td4[256];
+extern const u32 rcon[10];
+extern const u8 Td4s[256];
+extern const u8 rcons[10];
+
+#define RCON(i) (rcons[(i)] << 24)
+
+static inline u32 rotr(u32 val, int bits)
+{
+ return (val >> bits) | (val << (32 - bits));
+}
+
+#define TE0(i) Te0[((i) >> 24) & 0xff]
+#define TE1(i) rotr(Te0[((i) >> 16) & 0xff], 8)
+#define TE2(i) rotr(Te0[((i) >> 8) & 0xff], 16)
+#define TE3(i) rotr(Te0[(i) & 0xff], 24)
+#define TE41(i) ((Te0[((i) >> 24) & 0xff] << 8) & 0xff000000)
+#define TE42(i) (Te0[((i) >> 16) & 0xff] & 0x00ff0000)
+#define TE43(i) (Te0[((i) >> 8) & 0xff] & 0x0000ff00)
+#define TE44(i) ((Te0[(i) & 0xff] >> 8) & 0x000000ff)
+#define TE421(i) ((Te0[((i) >> 16) & 0xff] << 8) & 0xff000000)
+#define TE432(i) (Te0[((i) >> 8) & 0xff] & 0x00ff0000)
+#define TE443(i) (Te0[(i) & 0xff] & 0x0000ff00)
+#define TE414(i) ((Te0[((i) >> 24) & 0xff] >> 8) & 0x000000ff)
+#define TE4(i) ((Te0[(i)] >> 8) & 0x000000ff)
+
+#define TD0(i) Td0[((i) >> 24) & 0xff]
+#define TD1(i) rotr(Td0[((i) >> 16) & 0xff], 8)
+#define TD2(i) rotr(Td0[((i) >> 8) & 0xff], 16)
+#define TD3(i) rotr(Td0[(i) & 0xff], 24)
+#define TD41(i) (Td4s[((i) >> 24) & 0xff] << 24)
+#define TD42(i) (Td4s[((i) >> 16) & 0xff] << 16)
+#define TD43(i) (Td4s[((i) >> 8) & 0xff] << 8)
+#define TD44(i) (Td4s[(i) & 0xff])
+#define TD0_(i) Td0[(i) & 0xff]
+#define TD1_(i) rotr(Td0[(i) & 0xff], 8)
+#define TD2_(i) rotr(Td0[(i) & 0xff], 16)
+#define TD3_(i) rotr(Td0[(i) & 0xff], 24)
+
+#define GETU32(pt) (((u32)(pt)[0] << 24) ^ ((u32)(pt)[1] << 16) ^ \
+ ((u32)(pt)[2] << 8) ^ ((u32)(pt)[3]))
+
+#define PUTU32(ct, st) { \
+(ct)[0] = (u8)((st) >> 24); (ct)[1] = (u8)((st) >> 16); \
+(ct)[2] = (u8)((st) >> 8); (ct)[3] = (u8)(st); }
+
+#define WPA_GET_BE32(a) ((((u32)(a)[0]) << 24) | (((u32)(a)[1]) << 16) | \
+ (((u32)(a)[2]) << 8) | ((u32)(a)[3]))
+
+#define WPA_PUT_LE16(a, val) \
+ do { \
+ (a)[1] = ((u16)(val)) >> 8; \
+ (a)[0] = ((u16)(val)) & 0xff; \
+ } while (0)
+
+#define WPA_PUT_BE32(a, val) \
+ do { \
+ (a)[0] = (u8)((((u32)(val)) >> 24) & 0xff); \
+ (a)[1] = (u8)((((u32)(val)) >> 16) & 0xff); \
+ (a)[2] = (u8)((((u32)(val)) >> 8) & 0xff); \
+ (a)[3] = (u8)(((u32)(val)) & 0xff); \
+ } while (0)
+
+#define WPA_PUT_BE64(a, val) \
+ do { \
+ (a)[0] = (u8)(((u64)(val)) >> 56); \
+ (a)[1] = (u8)(((u64)(val)) >> 48); \
+ (a)[2] = (u8)(((u64)(val)) >> 40); \
+ (a)[3] = (u8)(((u64)(val)) >> 32); \
+ (a)[4] = (u8)(((u64)(val)) >> 24); \
+ (a)[5] = (u8)(((u64)(val)) >> 16); \
+ (a)[6] = (u8)(((u64)(val)) >> 8); \
+ (a)[7] = (u8)(((u64)(val)) & 0xff); \
+ } while (0)
+
+/* ===== start - public domain SHA256 implementation ===== */
+
+/* This is based on SHA256 implementation in LibTomCrypt that was released into
+ * public domain by Tom St Denis. */
+
+/* the K array */
+static const unsigned long K[64] = {
+ 0x428a2f98UL, 0x71374491UL, 0xb5c0fbcfUL, 0xe9b5dba5UL, 0x3956c25bUL,
+ 0x59f111f1UL, 0x923f82a4UL, 0xab1c5ed5UL, 0xd807aa98UL, 0x12835b01UL,
+ 0x243185beUL, 0x550c7dc3UL, 0x72be5d74UL, 0x80deb1feUL, 0x9bdc06a7UL,
+ 0xc19bf174UL, 0xe49b69c1UL, 0xefbe4786UL, 0x0fc19dc6UL, 0x240ca1ccUL,
+ 0x2de92c6fUL, 0x4a7484aaUL, 0x5cb0a9dcUL, 0x76f988daUL, 0x983e5152UL,
+ 0xa831c66dUL, 0xb00327c8UL, 0xbf597fc7UL, 0xc6e00bf3UL, 0xd5a79147UL,
+ 0x06ca6351UL, 0x14292967UL, 0x27b70a85UL, 0x2e1b2138UL, 0x4d2c6dfcUL,
+ 0x53380d13UL, 0x650a7354UL, 0x766a0abbUL, 0x81c2c92eUL, 0x92722c85UL,
+ 0xa2bfe8a1UL, 0xa81a664bUL, 0xc24b8b70UL, 0xc76c51a3UL, 0xd192e819UL,
+ 0xd6990624UL, 0xf40e3585UL, 0x106aa070UL, 0x19a4c116UL, 0x1e376c08UL,
+ 0x2748774cUL, 0x34b0bcb5UL, 0x391c0cb3UL, 0x4ed8aa4aUL, 0x5b9cca4fUL,
+ 0x682e6ff3UL, 0x748f82eeUL, 0x78a5636fUL, 0x84c87814UL, 0x8cc70208UL,
+ 0x90befffaUL, 0xa4506cebUL, 0xbef9a3f7UL, 0xc67178f2UL
+};
+
+/* Various logical functions */
+#define RORc(x, y) \
+ (((((unsigned long)(x) & 0xFFFFFFFFUL) >> (unsigned long)((y)&31)) | \
+ ((unsigned long)(x) << (unsigned long)(32-((y)&31)))) & 0xFFFFFFFFUL)
+#define Ch(x, y ,z) (z ^ (x & (y ^ z)))
+#define Maj(x, y, z) (((x | y) & z) | (x & y))
+#define S(x, n) RORc((x), (n))
+#define R(x, n) (((x)&0xFFFFFFFFUL)>>(n))
+#define Sigma0(x) (S(x, 2) ^ S(x, 13) ^ S(x, 22))
+#define Sigma1(x) (S(x, 6) ^ S(x, 11) ^ S(x, 25))
+#define Gamma0(x) (S(x, 7) ^ S(x, 18) ^ R(x, 3))
+#define Gamma1(x) (S(x, 17) ^ S(x, 19) ^ R(x, 10))
+#ifndef MIN
+#define MIN(x, y) (((x) < (y)) ? (x) : (y))
+#endif
+
+void rtw_secmicsetkey(struct mic_data *pmicdata, u8 *key);
+void rtw_secmicappendbyte(struct mic_data *pmicdata, u8 b);
+void rtw_secmicappend(struct mic_data *pmicdata, u8 *src, u32 nBytes);
+void rtw_secgetmic(struct mic_data *pmicdata, u8 *dst);
+void rtw_seccalctkipmic(u8 *key, u8 *header, u8 *data, u32 data_len,
+ u8 *Miccode, u8 priority);
+u32 rtw_aes_encrypt(struct adapter *padapter, u8 *pxmitframe);
+u32 rtw_tkip_encrypt(struct adapter *padapter, u8 *pxmitframe);
+void rtw_wep_encrypt(struct adapter *padapter, u8 *pxmitframe);
+u32 rtw_aes_decrypt(struct adapter *padapter, u8 *precvframe);
+u32 rtw_tkip_decrypt(struct adapter *padapter, u8 *precvframe);
+void rtw_wep_decrypt(struct adapter *padapter, u8 *precvframe);
+void rtw_use_tkipkey_handler(void *FunctionContext);
+
+#endif /* __RTL871X_SECURITY_H_ */
diff --git a/drivers/staging/r8188eu/include/rtw_sreset.h b/drivers/staging/r8188eu/include/rtw_sreset.h
new file mode 100644
index 000000000000..2a1244f75790
--- /dev/null
+++ b/drivers/staging/r8188eu/include/rtw_sreset.h
@@ -0,0 +1,50 @@
+/******************************************************************************
+ *
+ * Copyright(c) 2007 - 2012 Realtek Corporation. All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of version 2 of the GNU General Public License as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
+ * more details.
+ *
+ * You should have received a copy of the GNU General Public License along with
+ * this program; if not, write to the Free Software Foundation, Inc.,
+ * 51 Franklin Street, Fifth Floor, Boston, MA 02110, USA
+ *
+ *
+ ******************************************************************************/
+#ifndef _RTW_SRESET_C_
+#define _RTW_SRESET_C_
+
+#include <osdep_service.h>
+#include <drv_types.h>
+
+struct sreset_priv {
+ struct mutex silentreset_mutex;
+ u8 silent_reset_inprogress;
+ u8 Wifi_Error_Status;
+ unsigned long last_tx_time;
+ unsigned long last_tx_complete_time;
+};
+
+#include <rtl8188e_hal.h>
+
+#define WIFI_STATUS_SUCCESS 0
+#define USB_VEN_REQ_CMD_FAIL BIT0
+#define USB_READ_PORT_FAIL BIT1
+#define USB_WRITE_PORT_FAIL BIT2
+#define WIFI_MAC_TXDMA_ERROR BIT3
+#define WIFI_TX_HANG BIT4
+#define WIFI_RX_HANG BIT5
+#define WIFI_IF_NOT_EXIST BIT6
+
+void sreset_init_value(struct adapter *padapter);
+void sreset_reset_value(struct adapter *padapter);
+u8 sreset_get_wifi_status(struct adapter *padapter);
+void sreset_set_wifi_error_status(struct adapter *padapter, u32 status);
+
+#endif
diff --git a/drivers/staging/r8188eu/include/rtw_version.h b/drivers/staging/r8188eu/include/rtw_version.h
new file mode 100644
index 000000000000..6d2d52cbb3d3
--- /dev/null
+++ b/drivers/staging/r8188eu/include/rtw_version.h
@@ -0,0 +1 @@
+#define DRIVERVERSION "v4.1.4_6773.20130222"
diff --git a/drivers/staging/r8188eu/include/rtw_xmit.h b/drivers/staging/r8188eu/include/rtw_xmit.h
new file mode 100644
index 000000000000..5253dd0affd7
--- /dev/null
+++ b/drivers/staging/r8188eu/include/rtw_xmit.h
@@ -0,0 +1,383 @@
+/******************************************************************************
+ *
+ * Copyright(c) 2007 - 2011 Realtek Corporation. All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of version 2 of the GNU General Public License as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
+ * more details.
+ *
+ * You should have received a copy of the GNU General Public License along with
+ * this program; if not, write to the Free Software Foundation, Inc.,
+ * 51 Franklin Street, Fifth Floor, Boston, MA 02110, USA
+ *
+ *
+ ******************************************************************************/
+#ifndef _RTW_XMIT_H_
+#define _RTW_XMIT_H_
+
+#include <osdep_service.h>
+#include <drv_types.h>
+
+#define MAX_XMITBUF_SZ (20480) /* 20k */
+#define NR_XMITBUFF (4)
+
+#define XMITBUF_ALIGN_SZ 4
+
+/* xmit extension buff defination */
+#define MAX_XMIT_EXTBUF_SZ (1536)
+#define NR_XMIT_EXTBUFF (32)
+
+#define MAX_NUMBLKS (1)
+
+#define XMIT_VO_QUEUE (0)
+#define XMIT_VI_QUEUE (1)
+#define XMIT_BE_QUEUE (2)
+#define XMIT_BK_QUEUE (3)
+
+#define VO_QUEUE_INX 0
+#define VI_QUEUE_INX 1
+#define BE_QUEUE_INX 2
+#define BK_QUEUE_INX 3
+#define BCN_QUEUE_INX 4
+#define MGT_QUEUE_INX 5
+#define HIGH_QUEUE_INX 6
+#define TXCMD_QUEUE_INX 7
+
+#define HW_QUEUE_ENTRY 8
+
+#define WEP_IV(pattrib_iv, dot11txpn, keyidx)\
+do {\
+ pattrib_iv[0] = dot11txpn._byte_.TSC0;\
+ pattrib_iv[1] = dot11txpn._byte_.TSC1;\
+ pattrib_iv[2] = dot11txpn._byte_.TSC2;\
+ pattrib_iv[3] = ((keyidx & 0x3)<<6);\
+ dot11txpn.val = (dot11txpn.val == 0xffffff) ? 0 : (dot11txpn.val+1);\
+} while (0)
+
+#define TKIP_IV(pattrib_iv, dot11txpn, keyidx)\
+do {\
+ pattrib_iv[0] = dot11txpn._byte_.TSC1;\
+ pattrib_iv[1] = (dot11txpn._byte_.TSC1 | 0x20) & 0x7f;\
+ pattrib_iv[2] = dot11txpn._byte_.TSC0;\
+ pattrib_iv[3] = BIT(5) | ((keyidx & 0x3)<<6);\
+ pattrib_iv[4] = dot11txpn._byte_.TSC2;\
+ pattrib_iv[5] = dot11txpn._byte_.TSC3;\
+ pattrib_iv[6] = dot11txpn._byte_.TSC4;\
+ pattrib_iv[7] = dot11txpn._byte_.TSC5;\
+ dot11txpn.val = dot11txpn.val == 0xffffffffffffULL ? 0 : (dot11txpn.val+1);\
+} while (0)
+
+#define AES_IV(pattrib_iv, dot11txpn, keyidx)\
+do { \
+ pattrib_iv[0] = dot11txpn._byte_.TSC0; \
+ pattrib_iv[1] = dot11txpn._byte_.TSC1; \
+ pattrib_iv[2] = 0; \
+ pattrib_iv[3] = BIT(5) | ((keyidx & 0x3)<<6); \
+ pattrib_iv[4] = dot11txpn._byte_.TSC2; \
+ pattrib_iv[5] = dot11txpn._byte_.TSC3; \
+ pattrib_iv[6] = dot11txpn._byte_.TSC4; \
+ pattrib_iv[7] = dot11txpn._byte_.TSC5; \
+ dot11txpn.val = dot11txpn.val == 0xffffffffffffULL ? 0 : (dot11txpn.val+1);\
+} while (0)
+
+#define HWXMIT_ENTRY 4
+
+#define TXDESC_SIZE 32
+
+#define PACKET_OFFSET_SZ (8)
+#define TXDESC_OFFSET (TXDESC_SIZE + PACKET_OFFSET_SZ)
+
+struct tx_desc {
+ /* DWORD 0 */
+ __le32 txdw0;
+ __le32 txdw1;
+ __le32 txdw2;
+ __le32 txdw3;
+ __le32 txdw4;
+ __le32 txdw5;
+ __le32 txdw6;
+ __le32 txdw7;
+};
+
+union txdesc {
+ struct tx_desc txdesc;
+ unsigned int value[TXDESC_SIZE>>2];
+};
+
+struct hw_xmit {
+ struct __queue *sta_queue;
+ int accnt;
+};
+
+/* reduce size */
+struct pkt_attrib {
+ u8 type;
+ u8 subtype;
+ u8 bswenc;
+ u8 dhcp_pkt;
+ u16 ether_type;
+ u16 seqnum;
+ u16 pkt_hdrlen; /* the original 802.3 pkt header len */
+ u16 hdrlen; /* the WLAN Header Len */
+ u32 pktlen; /* the original 802.3 pkt raw_data len (not include
+ * ether_hdr data) */
+ u32 last_txcmdsz;
+ u8 nr_frags;
+ u8 encrypt; /* when 0 indicate no encrypt. when non-zero,
+ * indicate the encrypt algorith */
+ u8 iv_len;
+ u8 icv_len;
+ u8 iv[18];
+ u8 icv[16];
+ u8 priority;
+ u8 ack_policy;
+ u8 mac_id;
+ u8 vcs_mode; /* virtual carrier sense method */
+ u8 dst[ETH_ALEN];
+ u8 src[ETH_ALEN];
+ u8 ta[ETH_ALEN];
+ u8 ra[ETH_ALEN];
+ u8 key_idx;
+ u8 qos_en;
+ u8 ht_en;
+ u8 raid;/* rate adpative id */
+ u8 bwmode;
+ u8 ch_offset;/* PRIME_CHNL_OFFSET */
+ u8 sgi;/* short GI */
+ u8 ampdu_en;/* tx ampdu enable */
+ u8 mdata;/* more data bit */
+ u8 pctrl;/* per packet txdesc control enable */
+ u8 triggered;/* for ap mode handling Power Saving sta */
+ u8 qsel;
+ u8 eosp;
+ u8 rate;
+ u8 intel_proxim;
+ u8 retry_ctrl;
+ struct sta_info *psta;
+};
+
+#define WLANHDR_OFFSET 64
+
+#define NULL_FRAMETAG (0x0)
+#define DATA_FRAMETAG 0x01
+#define L2_FRAMETAG 0x02
+#define MGNT_FRAMETAG 0x03
+#define AMSDU_FRAMETAG 0x04
+
+#define EII_FRAMETAG 0x05
+#define IEEE8023_FRAMETAG 0x06
+
+#define MP_FRAMETAG 0x07
+
+#define TXAGG_FRAMETAG 0x08
+
+struct submit_ctx {
+ u32 submit_time; /* */
+ u32 timeout_ms; /* <0: not synchronous, 0: wait forever, >0: up to ms waiting */
+ int status; /* status for operation */
+ struct completion done;
+};
+
+enum {
+ RTW_SCTX_SUBMITTED = -1,
+ RTW_SCTX_DONE_SUCCESS = 0,
+ RTW_SCTX_DONE_UNKNOWN,
+ RTW_SCTX_DONE_TIMEOUT,
+ RTW_SCTX_DONE_BUF_ALLOC,
+ RTW_SCTX_DONE_BUF_FREE,
+ RTW_SCTX_DONE_WRITE_PORT_ERR,
+ RTW_SCTX_DONE_TX_DESC_NA,
+ RTW_SCTX_DONE_TX_DENY,
+ RTW_SCTX_DONE_CCX_PKT_FAIL,
+ RTW_SCTX_DONE_DRV_STOP,
+ RTW_SCTX_DONE_DEV_REMOVE,
+};
+
+void rtw_sctx_init(struct submit_ctx *sctx, int timeout_ms);
+int rtw_sctx_wait(struct submit_ctx *sctx);
+void rtw_sctx_done_err(struct submit_ctx **sctx, int status);
+void rtw_sctx_done(struct submit_ctx **sctx);
+
+struct xmit_buf {
+ struct list_head list;
+ struct adapter *padapter;
+ u8 *pallocated_buf;
+ u8 *pbuf;
+ void *priv_data;
+ u16 ext_tag; /* 0: Normal xmitbuf, 1: extension xmitbuf. */
+ u16 flags;
+ u32 alloc_sz;
+ u32 len;
+ struct submit_ctx *sctx;
+ u32 ff_hwaddr;
+ struct urb *pxmit_urb[8];
+ dma_addr_t dma_transfer_addr; /* (in) dma addr for transfer_buffer */
+ u8 bpending[8];
+ int last[8];
+};
+
+struct xmit_frame {
+ struct list_head list;
+ struct pkt_attrib attrib;
+ struct sk_buff *pkt;
+ int frame_tag;
+ struct adapter *padapter;
+ u8 *buf_addr;
+ struct xmit_buf *pxmitbuf;
+
+ u8 agg_num;
+ s8 pkt_offset;
+ u8 ack_report;
+};
+
+struct tx_servq {
+ struct list_head tx_pending;
+ struct __queue sta_pending;
+ int qcnt;
+};
+
+struct sta_xmit_priv {
+ spinlock_t lock;
+ int option;
+ int apsd_setting; /* When bit mask is on, the associated edca
+ * queue supports APSD. */
+ struct tx_servq be_q; /* priority == 0,3 */
+ struct tx_servq bk_q; /* priority == 1,2 */
+ struct tx_servq vi_q; /* priority == 4,5 */
+ struct tx_servq vo_q; /* priority == 6,7 */
+ struct list_head legacy_dz;
+ struct list_head apsd;
+ u16 txseq_tid[16];
+};
+
+struct hw_txqueue {
+ volatile int head;
+ volatile int tail;
+ volatile int free_sz; /* in units of 64 bytes */
+ volatile int free_cmdsz;
+ volatile int txsz[8];
+ uint ff_hwaddr;
+ uint cmd_hwaddr;
+ int ac_tag;
+};
+
+struct agg_pkt_info {
+ u16 offset;
+ u16 pkt_len;
+};
+
+struct xmit_priv {
+ spinlock_t lock;
+ struct semaphore xmit_sema;
+ struct semaphore terminate_xmitthread_sema;
+ struct __queue be_pending;
+ struct __queue bk_pending;
+ struct __queue vi_pending;
+ struct __queue vo_pending;
+ struct __queue bm_pending;
+ u8 *pallocated_frame_buf;
+ u8 *pxmit_frame_buf;
+ uint free_xmitframe_cnt;
+ struct __queue free_xmit_queue;
+ uint frag_len;
+ struct adapter *adapter;
+ u8 vcs_setting;
+ u8 vcs;
+ u8 vcs_type;
+ u64 tx_bytes;
+ u64 tx_pkts;
+ u64 tx_drop;
+ u64 last_tx_bytes;
+ u64 last_tx_pkts;
+ struct hw_xmit *hwxmits;
+ u8 hwxmit_entry;
+ u8 wmm_para_seq[4];/* sequence for wmm ac parameter strength
+ * from large to small. it's value is 0->vo,
+ * 1->vi, 2->be, 3->bk. */
+ struct semaphore tx_retevt;/* all tx return event; */
+ u8 txirp_cnt;/* */
+ struct tasklet_struct xmit_tasklet;
+ /* per AC pending irp */
+ int beq_cnt;
+ int bkq_cnt;
+ int viq_cnt;
+ int voq_cnt;
+ struct __queue free_xmitbuf_queue;
+ struct __queue pending_xmitbuf_queue;
+ u8 *pallocated_xmitbuf;
+ u8 *pxmitbuf;
+ uint free_xmitbuf_cnt;
+ struct __queue free_xmit_extbuf_queue;
+ u8 *pallocated_xmit_extbuf;
+ u8 *pxmit_extbuf;
+ uint free_xmit_extbuf_cnt;
+ u16 nqos_ssn;
+ int ack_tx;
+ struct mutex ack_tx_mutex;
+ struct submit_ctx ack_tx_ops;
+};
+
+struct xmit_buf *rtw_alloc_xmitbuf_ext(struct xmit_priv *pxmitpriv);
+s32 rtw_free_xmitbuf_ext(struct xmit_priv *pxmitpriv,
+ struct xmit_buf *pxmitbuf);
+struct xmit_buf *rtw_alloc_xmitbuf(struct xmit_priv *pxmitpriv);
+s32 rtw_free_xmitbuf(struct xmit_priv *pxmitpriv,
+ struct xmit_buf *pxmitbuf);
+void rtw_count_tx_stats(struct adapter *padapter,
+ struct xmit_frame *pxmitframe, int sz);
+void rtw_update_protection(struct adapter *padapter, u8 *ie, uint ie_len);
+s32 rtw_make_wlanhdr(struct adapter *padapter, u8 *hdr,
+ struct pkt_attrib *pattrib);
+s32 rtw_put_snap(u8 *data, u16 h_proto);
+
+struct xmit_frame *rtw_alloc_xmitframe(struct xmit_priv *pxmitpriv);
+s32 rtw_free_xmitframe(struct xmit_priv *pxmitpriv,
+ struct xmit_frame *pxmitframe);
+void rtw_free_xmitframe_queue(struct xmit_priv *pxmitpriv,
+ struct __queue *pframequeue);
+struct tx_servq *rtw_get_sta_pending(struct adapter *padapter,
+ struct sta_info *psta, int up, u8 *ac);
+s32 rtw_xmitframe_enqueue(struct adapter *padapter,
+ struct xmit_frame *pxmitframe);
+struct xmit_frame *rtw_dequeue_xframe(struct xmit_priv *pxmitpriv,
+ struct hw_xmit *phwxmit_i, int entry);
+
+s32 rtw_xmit_classifier(struct adapter *padapter,
+ struct xmit_frame *pxmitframe);
+u32 rtw_calculate_wlan_pkt_size_by_attribue(struct pkt_attrib *pattrib);
+#define rtw_wlan_pkt_size(f) rtw_calculate_wlan_pkt_size_by_attribue(&f->attrib)
+s32 rtw_xmitframe_coalesce(struct adapter *padapter, struct sk_buff *pkt,
+ struct xmit_frame *pxmitframe);
+s32 _rtw_init_hw_txqueue(struct hw_txqueue *phw_txqueue, u8 ac_tag);
+void _rtw_init_sta_xmit_priv(struct sta_xmit_priv *psta_xmitpriv);
+s32 rtw_txframes_pending(struct adapter *padapter);
+s32 rtw_txframes_sta_ac_pending(struct adapter *padapter,
+ struct pkt_attrib *pattrib);
+void rtw_init_hwxmits(struct hw_xmit *phwxmit, int entry);
+s32 _rtw_init_xmit_priv(struct xmit_priv *pxmitpriv, struct adapter *padapter);
+void _rtw_free_xmit_priv(struct xmit_priv *pxmitpriv);
+void rtw_alloc_hwxmits(struct adapter *padapter);
+void rtw_free_hwxmits(struct adapter *padapter);
+s32 rtw_xmit(struct adapter *padapter, struct sk_buff **pkt);
+
+#if defined(CONFIG_88EU_AP_MODE)
+int xmitframe_enqueue_for_sleeping_sta(struct adapter *padapter, struct xmit_frame *pxmitframe);
+void stop_sta_xmit(struct adapter *padapter, struct sta_info *psta);
+void wakeup_sta_to_xmit(struct adapter *padapter, struct sta_info *psta);
+void xmit_delivery_enabled_frames(struct adapter *padapter, struct sta_info *psta);
+#endif
+
+u8 qos_acm(u8 acm_mask, u8 priority);
+u32 rtw_get_ff_hwaddr(struct xmit_frame *pxmitframe);
+int rtw_ack_tx_wait(struct xmit_priv *pxmitpriv, u32 timeout_ms);
+void rtw_ack_tx_done(struct xmit_priv *pxmitpriv, int status);
+
+/* include after declaring struct xmit_buf, in order to avoid warning */
+#include <xmit_osdep.h>
+
+#endif /* _RTL871X_XMIT_H_ */
diff --git a/drivers/staging/r8188eu/include/sta_info.h b/drivers/staging/r8188eu/include/sta_info.h
new file mode 100644
index 000000000000..3e909db1d41a
--- /dev/null
+++ b/drivers/staging/r8188eu/include/sta_info.h
@@ -0,0 +1,384 @@
+/******************************************************************************
+ *
+ * Copyright(c) 2007 - 2011 Realtek Corporation. All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of version 2 of the GNU General Public License as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
+ * more details.
+ *
+ * You should have received a copy of the GNU General Public License along with
+ * this program; if not, write to the Free Software Foundation, Inc.,
+ * 51 Franklin Street, Fifth Floor, Boston, MA 02110, USA
+ *
+ *
+ ******************************************************************************/
+#ifndef __STA_INFO_H_
+#define __STA_INFO_H_
+
+#include <osdep_service.h>
+#include <drv_types.h>
+#include <wifi.h>
+
+#define IBSS_START_MAC_ID 2
+#define NUM_STA 32
+#define NUM_ACL 16
+
+/* if mode ==0, then the sta is allowed once the addr is hit. */
+/* if mode ==1, then the sta is rejected once the addr is non-hit. */
+struct rtw_wlan_acl_node {
+ struct list_head list;
+ u8 addr[ETH_ALEN];
+ u8 valid;
+};
+
+/* mode=0, disable */
+/* mode=1, accept unless in deny list */
+/* mode=2, deny unless in accept list */
+struct wlan_acl_pool {
+ int mode;
+ int num;
+ struct rtw_wlan_acl_node aclnode[NUM_ACL];
+ struct __queue acl_node_q;
+};
+
+struct rssi_sta {
+ s32 UndecoratedSmoothedPWDB;
+ s32 UndecoratedSmoothedCCK;
+ s32 UndecoratedSmoothedOFDM;
+ u64 PacketMap;
+ u8 ValidBit;
+};
+
+struct stainfo_stats {
+ u64 rx_mgnt_pkts;
+ u64 rx_beacon_pkts;
+ u64 rx_probereq_pkts;
+ u64 rx_probersp_pkts;
+ u64 rx_probersp_bm_pkts;
+ u64 rx_probersp_uo_pkts;
+ u64 rx_ctrl_pkts;
+ u64 rx_data_pkts;
+
+ u64 last_rx_mgnt_pkts;
+ u64 last_rx_beacon_pkts;
+ u64 last_rx_probereq_pkts;
+ u64 last_rx_probersp_pkts;
+ u64 last_rx_probersp_bm_pkts;
+ u64 last_rx_probersp_uo_pkts;
+ u64 last_rx_ctrl_pkts;
+ u64 last_rx_data_pkts;
+ u64 rx_bytes;
+ u64 rx_drops;
+ u64 tx_pkts;
+ u64 tx_bytes;
+ u64 tx_drops;
+};
+
+struct sta_info {
+ spinlock_t lock;
+ struct list_head list; /* free_sta_queue */
+ struct list_head hash_list; /* sta_hash */
+
+ struct sta_xmit_priv sta_xmitpriv;
+ struct sta_recv_priv sta_recvpriv;
+
+ struct __queue sleep_q;
+ unsigned int sleepq_len;
+
+ uint state;
+ uint aid;
+ uint mac_id;
+ uint qos_option;
+ u8 hwaddr[ETH_ALEN];
+
+ uint ieee8021x_blocked; /* 0: allowed, 1:blocked */
+ uint dot118021XPrivacy; /* aes, tkip... */
+ union Keytype dot11tkiptxmickey;
+ union Keytype dot11tkiprxmickey;
+ union Keytype dot118021x_UncstKey;
+ union pn48 dot11txpn; /* PN48 used for Unicast xmit. */
+ union pn48 dot11rxpn; /* PN48 used for Unicast recv. */
+ u8 bssrateset[16];
+ u32 bssratelen;
+ s32 rssi;
+ s32 signal_quality;
+
+ u8 cts2self;
+ u8 rtsen;
+
+ u8 raid;
+ u8 init_rate;
+ u32 ra_mask;
+ u8 wireless_mode; /* NETWORK_TYPE */
+ struct stainfo_stats sta_stats;
+
+ /* for A-MPDU TX, ADDBA timeout check */
+ struct timer_list addba_retry_timer;
+
+ /* for A-MPDU Rx reordering buffer control */
+ struct recv_reorder_ctrl recvreorder_ctrl[16];
+
+ /* for A-MPDU Tx */
+ /* unsigned char ampdu_txen_bitmap; */
+ u16 BA_starting_seqctrl[16];
+
+ struct ht_priv htpriv;
+
+ /* Notes: */
+ /* STA_Mode: */
+ /* curr_network(mlme_priv/security_priv/qos/ht) +
+ * sta_info: (STA & AP) CAP/INFO */
+ /* scan_q: AP CAP/INFO */
+
+ /* AP_Mode: */
+ /* curr_network(mlme_priv/security_priv/qos/ht) : AP CAP/INFO */
+ /* sta_info: (AP & STA) CAP/INFO */
+
+ struct list_head asoc_list;
+#ifdef CONFIG_88EU_AP_MODE
+ struct list_head auth_list;
+
+ unsigned int expire_to;
+ unsigned int auth_seq;
+ unsigned int authalg;
+ unsigned char chg_txt[128];
+
+ u16 capability;
+ int flags;
+
+ int dot8021xalg;/* 0:disable, 1:psk, 2:802.1x */
+ int wpa_psk;/* 0:disable, bit(0): WPA, bit(1):WPA2 */
+ int wpa_group_cipher;
+ int wpa2_group_cipher;
+ int wpa_pairwise_cipher;
+ int wpa2_pairwise_cipher;
+
+ u8 bpairwise_key_installed;
+
+ u8 wpa_ie[32];
+
+ u8 nonerp_set;
+ u8 no_short_slot_time_set;
+ u8 no_short_preamble_set;
+ u8 no_ht_gf_set;
+ u8 no_ht_set;
+ u8 ht_20mhz_set;
+
+ unsigned int tx_ra_bitmap;
+ u8 qos_info;
+
+ u8 max_sp_len;
+ u8 uapsd_bk;/* BIT(0): Delivery enabled, BIT(1): Trigger enabled */
+ u8 uapsd_be;
+ u8 uapsd_vi;
+ u8 uapsd_vo;
+
+ u8 has_legacy_ac;
+ unsigned int sleepq_ac_len;
+#endif /* CONFIG_88EU_AP_MODE */
+
+#ifdef CONFIG_88EU_P2P
+ /* p2p priv data */
+ u8 is_p2p_device;
+ u8 p2p_status_code;
+
+ /* p2p client info */
+ u8 dev_addr[ETH_ALEN];
+ u8 dev_cap;
+ u16 config_methods;
+ u8 primary_dev_type[8];
+ u8 num_of_secdev_type;
+ u8 secdev_types_list[32];/* 32/8 == 4; */
+ u16 dev_name_len;
+ u8 dev_name[32];
+#endif /* CONFIG_88EU_P2P */
+ u8 under_exist_checking;
+ u8 keep_alive_trycnt;
+
+ /* for DM */
+ struct rssi_sta rssi_stat;
+
+ /* ================ODM Relative Info======================= */
+ /* Please be careful, don't declare too much structure here.
+ * It will cost memory * STA support num. */
+ /* 2011/10/20 MH Add for ODM STA info. */
+ /* Driver Write */
+ u8 bValid; /* record the sta status link or not? */
+ u8 IOTPeer; /* Enum value. HT_IOT_PEER_E */
+ u8 rssi_level; /* for Refresh RA mask */
+ /* ODM Write */
+ /* 1 PHY_STATUS_INFO */
+ u8 RSSI_Path[4]; /* */
+ u8 RSSI_Ave;
+ u8 RXEVM[4];
+ u8 RXSNR[4];
+
+ /* ================ODM Relative Info======================= */
+ /* */
+
+ /* To store the sequence number of received management frame */
+ u16 RxMgmtFrameSeqNum;
+};
+
+#define sta_rx_pkts(sta) \
+ (sta->sta_stats.rx_mgnt_pkts \
+ + sta->sta_stats.rx_ctrl_pkts \
+ + sta->sta_stats.rx_data_pkts)
+
+#define sta_last_rx_pkts(sta) \
+ (sta->sta_stats.last_rx_mgnt_pkts \
+ + sta->sta_stats.last_rx_ctrl_pkts \
+ + sta->sta_stats.last_rx_data_pkts)
+
+#define sta_rx_data_pkts(sta) \
+ (sta->sta_stats.rx_data_pkts)
+
+#define sta_last_rx_data_pkts(sta) \
+ (sta->sta_stats.last_rx_data_pkts)
+
+#define sta_rx_mgnt_pkts(sta) \
+ (sta->sta_stats.rx_mgnt_pkts)
+
+#define sta_last_rx_mgnt_pkts(sta) \
+ (sta->sta_stats.last_rx_mgnt_pkts)
+
+#define sta_rx_beacon_pkts(sta) \
+ (sta->sta_stats.rx_beacon_pkts)
+
+#define sta_last_rx_beacon_pkts(sta) \
+ (sta->sta_stats.last_rx_beacon_pkts)
+
+#define sta_rx_probereq_pkts(sta) \
+ (sta->sta_stats.rx_probereq_pkts)
+
+#define sta_last_rx_probereq_pkts(sta) \
+ (sta->sta_stats.last_rx_probereq_pkts)
+
+#define sta_rx_probersp_pkts(sta) \
+ (sta->sta_stats.rx_probersp_pkts)
+
+#define sta_last_rx_probersp_pkts(sta) \
+ (sta->sta_stats.last_rx_probersp_pkts)
+
+#define sta_rx_probersp_bm_pkts(sta) \
+ (sta->sta_stats.rx_probersp_bm_pkts)
+
+#define sta_last_rx_probersp_bm_pkts(sta) \
+ (sta->sta_stats.last_rx_probersp_bm_pkts)
+
+#define sta_rx_probersp_uo_pkts(sta) \
+ (sta->sta_stats.rx_probersp_uo_pkts)
+
+#define sta_last_rx_probersp_uo_pkts(sta) \
+ (sta->sta_stats.last_rx_probersp_uo_pkts)
+
+#define sta_update_last_rx_pkts(sta) \
+do { \
+ sta->sta_stats.last_rx_mgnt_pkts = sta->sta_stats.rx_mgnt_pkts; \
+ sta->sta_stats.last_rx_beacon_pkts = sta->sta_stats.rx_beacon_pkts; \
+ sta->sta_stats.last_rx_probereq_pkts = sta->sta_stats.rx_probereq_pkts; \
+ sta->sta_stats.last_rx_probersp_pkts = sta->sta_stats.rx_probersp_pkts; \
+ sta->sta_stats.last_rx_probersp_bm_pkts = sta->sta_stats.rx_probersp_bm_pkts; \
+ sta->sta_stats.last_rx_probersp_uo_pkts = sta->sta_stats.rx_probersp_uo_pkts; \
+ sta->sta_stats.last_rx_ctrl_pkts = sta->sta_stats.rx_ctrl_pkts; \
+ sta->sta_stats.last_rx_data_pkts = sta->sta_stats.rx_data_pkts; \
+} while (0)
+
+#define STA_RX_PKTS_ARG(sta) \
+ sta->sta_stats.rx_mgnt_pkts \
+ , sta->sta_stats.rx_ctrl_pkts \
+ , sta->sta_stats.rx_data_pkts
+
+#define STA_LAST_RX_PKTS_ARG(sta) \
+ sta->sta_stats.last_rx_mgnt_pkts \
+ , sta->sta_stats.last_rx_ctrl_pkts \
+ , sta->sta_stats.last_rx_data_pkts
+
+#define STA_RX_PKTS_DIFF_ARG(sta) \
+ sta->sta_stats.rx_mgnt_pkts - sta->sta_stats.last_rx_mgnt_pkts \
+ , sta->sta_stats.rx_ctrl_pkts - sta->sta_stats.last_rx_ctrl_pkts \
+ , sta->sta_stats.rx_data_pkts - sta->sta_stats.last_rx_data_pkts
+
+#define STA_PKTS_FMT "(m:%llu, c:%llu, d:%llu)"
+
+struct sta_priv {
+ u8 *pallocated_stainfo_buf;
+ u8 *pstainfo_buf;
+ struct __queue free_sta_queue;
+
+ spinlock_t sta_hash_lock;
+ struct list_head sta_hash[NUM_STA];
+ int asoc_sta_count;
+ struct __queue sleep_q;
+ struct __queue wakeup_q;
+
+ struct adapter *padapter;
+
+ spinlock_t asoc_list_lock;
+ struct list_head asoc_list;
+
+#ifdef CONFIG_88EU_AP_MODE
+ struct list_head auth_list;
+ spinlock_t auth_list_lock;
+ u8 asoc_list_cnt;
+ u8 auth_list_cnt;
+
+ unsigned int auth_to; /* sec, time to expire in authenticating. */
+ unsigned int assoc_to; /* sec, time to expire before associating. */
+ unsigned int expire_to; /* sec , time to expire after associated. */
+
+ /* pointers to STA info; based on allocated AID or NULL if AID free
+ * AID is in the range 1-2007, so sta_aid[0] corresponders to AID 1
+ * and so on
+ */
+ struct sta_info *sta_aid[NUM_STA];
+
+ u16 sta_dz_bitmap;/* only support 15 stations, station aid bitmap
+ * for sleeping sta. */
+ u16 tim_bitmap; /* only support 15 stations, aid=0~15 mapping
+ * bit0~bit15 */
+
+ u16 max_num_sta;
+
+ struct wlan_acl_pool acl_list;
+#endif
+
+};
+
+static inline u32 wifi_mac_hash(u8 *mac)
+{
+ u32 x;
+
+ x = mac[0];
+ x = (x << 2) ^ mac[1];
+ x = (x << 2) ^ mac[2];
+ x = (x << 2) ^ mac[3];
+ x = (x << 2) ^ mac[4];
+ x = (x << 2) ^ mac[5];
+
+ x ^= x >> 8;
+ x = x & (NUM_STA - 1);
+ return x;
+}
+
+extern u32 _rtw_init_sta_priv(struct sta_priv *pstapriv);
+extern u32 _rtw_free_sta_priv(struct sta_priv *pstapriv);
+
+#define stainfo_offset_valid(offset) (offset < NUM_STA && offset >= 0)
+int rtw_stainfo_offset(struct sta_priv *stapriv, struct sta_info *sta);
+struct sta_info *rtw_get_stainfo_by_offset(struct sta_priv *stapriv, int off);
+
+extern struct sta_info *rtw_alloc_stainfo(struct sta_priv *stapriv, u8 *hwaddr);
+extern u32 rtw_free_stainfo(struct adapter *adapt, struct sta_info *psta);
+extern void rtw_free_all_stainfo(struct adapter *adapt);
+extern struct sta_info *rtw_get_stainfo(struct sta_priv *stapriv, u8 *hwaddr);
+extern u32 rtw_init_bcmc_stainfo(struct adapter *adapt);
+extern struct sta_info *rtw_get_bcmc_stainfo(struct adapter *padapter);
+extern u8 rtw_access_ctrl(struct adapter *padapter, u8 *mac_addr);
+
+#endif /* _STA_INFO_H_ */
diff --git a/drivers/staging/r8188eu/include/usb_hal.h b/drivers/staging/r8188eu/include/usb_hal.h
new file mode 100644
index 000000000000..8a65995d5e48
--- /dev/null
+++ b/drivers/staging/r8188eu/include/usb_hal.h
@@ -0,0 +1,26 @@
+/******************************************************************************
+ *
+ * Copyright(c) 2007 - 2011 Realtek Corporation. All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of version 2 of the GNU General Public License as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
+ * more details.
+ *
+ * You should have received a copy of the GNU General Public License along with
+ * this program; if not, write to the Free Software Foundation, Inc.,
+ * 51 Franklin Street, Fifth Floor, Boston, MA 02110, USA
+ *
+ *
+ ******************************************************************************/
+#ifndef __USB_HAL_H__
+#define __USB_HAL_H__
+
+void rtl8188eu_set_hal_ops(struct adapter *padapter);
+#define hal_set_hal_ops rtl8188eu_set_hal_ops
+
+#endif /* __USB_HAL_H__ */
diff --git a/drivers/staging/r8188eu/include/usb_ops.h b/drivers/staging/r8188eu/include/usb_ops.h
new file mode 100644
index 000000000000..6562082beb7a
--- /dev/null
+++ b/drivers/staging/r8188eu/include/usb_ops.h
@@ -0,0 +1,115 @@
+/******************************************************************************
+ *
+ * Copyright(c) 2007 - 2011 Realtek Corporation. All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of version 2 of the GNU General Public License as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
+ * more details.
+ *
+ * You should have received a copy of the GNU General Public License along with
+ * this program; if not, write to the Free Software Foundation, Inc.,
+ * 51 Franklin Street, Fifth Floor, Boston, MA 02110, USA
+ *
+ *
+ ******************************************************************************/
+#ifndef __USB_OPS_H_
+#define __USB_OPS_H_
+
+#include <linux/version.h>
+#include <osdep_service.h>
+#include <drv_types.h>
+#include <osdep_intf.h>
+
+#define REALTEK_USB_VENQT_READ 0xC0
+#define REALTEK_USB_VENQT_WRITE 0x40
+#define REALTEK_USB_VENQT_CMD_REQ 0x05
+#define REALTEK_USB_VENQT_CMD_IDX 0x00
+
+enum {
+ VENDOR_WRITE = 0x00,
+ VENDOR_READ = 0x01,
+};
+#define ALIGNMENT_UNIT 16
+#define MAX_VENDOR_REQ_CMD_SIZE 254 /* 8188cu SIE Support */
+#define MAX_USB_IO_CTL_SIZE (MAX_VENDOR_REQ_CMD_SIZE + ALIGNMENT_UNIT)
+
+#if (LINUX_VERSION_CODE >= KERNEL_VERSION(2, 6, 12))
+#define rtw_usb_control_msg(dev, pipe, request, requesttype, \
+ value, index, data, size, timeout_ms) \
+ usb_control_msg((dev), (pipe), (request), (requesttype), (value),\
+ (index), (data), (size), (timeout_ms))
+#define rtw_usb_bulk_msg(usb_dev, pipe, data, len, actual_length, timeout_ms) \
+ usb_bulk_msg((usb_dev), (pipe), (data), (len), \
+ (actual_length), (timeout_ms))
+#else
+#define rtw_usb_control_msg(dev, pipe, request, requesttype, \
+ value, index, data, size, timeout_ms) \
+ usb_control_msg((dev), (pipe), (request), (requesttype), \
+ (value), (index), (data), (size), \
+ ((timeout_ms) == 0) || \
+ ((timeout_ms)*HZ/1000 > 0) ? \
+ ((timeout_ms)*HZ/1000) : 1)
+#define rtw_usb_bulk_msg(usb_dev, pipe, data, len, \
+ actual_length, timeout_ms) \
+ usb_bulk_msg((usb_dev), (pipe), (data), (len), (actual_length), \
+ ((timeout_ms) == 0) || ((timeout_ms)*HZ/1000 > 0) ?\
+ ((timeout_ms)*HZ/1000) : 1)
+#endif
+#include <usb_ops_linux.h>
+
+void rtl8188eu_set_hw_type(struct adapter *padapter);
+#define hal_set_hw_type rtl8188eu_set_hw_type
+void rtl8188eu_set_intf_ops(struct _io_ops *pops);
+#define usb_set_intf_ops rtl8188eu_set_intf_ops
+
+/*
+ * Increase and check if the continual_urb_error of this @param dvobjprivei
+ * is larger than MAX_CONTINUAL_URB_ERR
+ * @return true:
+ * @return false:
+ */
+static inline int rtw_inc_and_chk_continual_urb_error(struct dvobj_priv *dvobj)
+{
+ int ret = false;
+ int value;
+ value = ATOMIC_INC_RETURN(&dvobj->continual_urb_error);
+ if (value > MAX_CONTINUAL_URB_ERR) {
+ DBG_88E("[dvobj:%p][ERROR] continual_urb_error:%d > %d\n",
+ dvobj, value, MAX_CONTINUAL_URB_ERR);
+ ret = true;
+ }
+ return ret;
+}
+
+/*
+* Set the continual_urb_error of this @param dvobjprive to 0
+*/
+static inline void rtw_reset_continual_urb_error(struct dvobj_priv *dvobj)
+{
+ ATOMIC_SET(&dvobj->continual_urb_error, 0);
+}
+
+#define USB_HIGH_SPEED_BULK_SIZE 512
+#define USB_FULL_SPEED_BULK_SIZE 64
+
+static inline u8 rtw_usb_bulk_size_boundary(struct adapter *padapter,
+ int buf_len)
+{
+ u8 rst = true;
+ struct dvobj_priv *pdvobjpriv = adapter_to_dvobj(padapter);
+
+ if (pdvobjpriv->ishighspeed)
+ rst = (0 == (buf_len) % USB_HIGH_SPEED_BULK_SIZE) ?
+ true : false;
+ else
+ rst = (0 == (buf_len) % USB_FULL_SPEED_BULK_SIZE) ?
+ true : false;
+ return rst;
+}
+
+#endif /* __USB_OPS_H_ */
diff --git a/drivers/staging/r8188eu/include/usb_ops_linux.h b/drivers/staging/r8188eu/include/usb_ops_linux.h
new file mode 100644
index 000000000000..e5b758a81a5c
--- /dev/null
+++ b/drivers/staging/r8188eu/include/usb_ops_linux.h
@@ -0,0 +1,55 @@
+/******************************************************************************
+ *
+ * Copyright(c) 2007 - 2011 Realtek Corporation. All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of version 2 of the GNU General Public License as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
+ * more details.
+ *
+ * You should have received a copy of the GNU General Public License along with
+ * this program; if not, write to the Free Software Foundation, Inc.,
+ * 51 Franklin Street, Fifth Floor, Boston, MA 02110, USA
+ *
+ *
+ ******************************************************************************/
+#ifndef __USB_OPS_LINUX_H__
+#define __USB_OPS_LINUX_H__
+
+#define VENDOR_CMD_MAX_DATA_LEN 254
+
+#define RTW_USB_CONTROL_MSG_TIMEOUT_TEST 10/* ms */
+#define RTW_USB_CONTROL_MSG_TIMEOUT 500/* ms */
+
+#define MAX_USBCTRL_VENDORREQ_TIMES 10
+
+#define RTW_USB_BULKOUT_TIME 5000/* ms */
+
+#define _usbctrl_vendorreq_async_callback(urb, regs) \
+ _usbctrl_vendorreq_async_callback(urb)
+#define usb_bulkout_zero_complete(purb, regs) \
+ usb_bulkout_zero_complete(purb)
+#define usb_write_mem_complete(purb, regs) \
+ usb_write_mem_complete(purb)
+#define usb_write_port_complete(purb, regs) \
+ usb_write_port_complete(purb)
+#define usb_read_port_complete(purb, regs) \
+ usb_read_port_complete(purb)
+#define usb_read_interrupt_complete(purb, regs) \
+ usb_read_interrupt_complete(purb)
+
+unsigned int ffaddr2pipehdl(struct dvobj_priv *pdvobj, u32 addr);
+
+void usb_read_mem(struct intf_hdl *pintfhdl, u32 addr, u32 cnt, u8 *rmem);
+void usb_write_mem(struct intf_hdl *pintfhdl, u32 addr, u32 cnt, u8 *wmem);
+
+void usb_read_port_cancel(struct intf_hdl *pintfhdl);
+
+u32 usb_write_port(struct intf_hdl *pintfhdl, u32 addr, u32 cnt, u8 *wmem);
+void usb_write_port_cancel(struct intf_hdl *pintfhdl);
+
+#endif
diff --git a/drivers/staging/r8188eu/include/usb_osintf.h b/drivers/staging/r8188eu/include/usb_osintf.h
new file mode 100644
index 000000000000..9de99ca9799a
--- /dev/null
+++ b/drivers/staging/r8188eu/include/usb_osintf.h
@@ -0,0 +1,45 @@
+/******************************************************************************
+ *
+ * Copyright(c) 2007 - 2011 Realtek Corporation. All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of version 2 of the GNU General Public License as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
+ * more details.
+ *
+ * You should have received a copy of the GNU General Public License along with
+ * this program; if not, write to the Free Software Foundation, Inc.,
+ * 51 Franklin Street, Fifth Floor, Boston, MA 02110, USA
+ *
+ *
+ ******************************************************************************/
+#ifndef __USB_OSINTF_H
+#define __USB_OSINTF_H
+
+#include <osdep_service.h>
+#include <drv_types.h>
+#include <usb_vendor_req.h>
+
+extern char *rtw_initmac;
+extern int rtw_mc2u_disable;
+
+#define USBD_HALTED(Status) ((u32)(Status) >> 30 == 3)
+
+u8 usbvendorrequest(struct dvobj_priv *pdvobjpriv, enum bt_usb_request brequest,
+ enum rt_usb_wvalue wvalue, u8 windex, void *data,
+ u8 datalen, u8 isdirectionin);
+int pm_netdev_open(struct net_device *pnetdev, u8 bnormal);
+void netdev_br_init(struct net_device *netdev);
+void dhcp_flag_bcast(struct adapter *priv, struct sk_buff *skb);
+void *scdb_findEntry(struct adapter *priv, unsigned char *macAddr,
+ unsigned char *ipAddr);
+void nat25_db_expire(struct adapter *priv);
+int nat25_db_handle(struct adapter *priv, struct sk_buff *skb, int method);
+
+int rtw_resume_process(struct adapter *padapter);
+
+#endif
diff --git a/drivers/staging/r8188eu/include/usb_vendor_req.h b/drivers/staging/r8188eu/include/usb_vendor_req.h
new file mode 100644
index 000000000000..04f1b9e267e1
--- /dev/null
+++ b/drivers/staging/r8188eu/include/usb_vendor_req.h
@@ -0,0 +1,51 @@
+/******************************************************************************
+ *
+ * Copyright(c) 2007 - 2011 Realtek Corporation. All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of version 2 of the GNU General Public License as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
+ * more details.
+ *
+ * You should have received a copy of the GNU General Public License along with
+ * this program; if not, write to the Free Software Foundation, Inc.,
+ * 51 Franklin Street, Fifth Floor, Boston, MA 02110, USA
+ *
+ *
+ ******************************************************************************/
+#ifndef _USB_VENDOR_REQUEST_H_
+#define _USB_VENDOR_REQUEST_H_
+
+/* 4 Set/Get Register related wIndex/Data */
+#define RT_USB_RESET_MASK_OFF 0
+#define RT_USB_RESET_MASK_ON 1
+#define RT_USB_SLEEP_MASK_OFF 0
+#define RT_USB_SLEEP_MASK_ON 1
+#define RT_USB_LDO_ON 1
+#define RT_USB_LDO_OFF 0
+
+/* 4 Set/Get SYSCLK related wValue or Data */
+#define RT_USB_SYSCLK_32KHZ 0
+#define RT_USB_SYSCLK_40MHZ 1
+#define RT_USB_SYSCLK_60MHZ 2
+
+enum bt_usb_request {
+ RT_USB_SET_REGISTER = 1,
+ RT_USB_SET_SYSCLK = 2,
+ RT_USB_GET_SYSCLK = 3,
+ RT_USB_GET_REGISTER = 4
+};
+
+enum rt_usb_wvalue {
+ RT_USB_RESET_MASK = 1,
+ RT_USB_SLEEP_MASK = 2,
+ RT_USB_USB_HRCPWM = 3,
+ RT_USB_LDO = 4,
+ RT_USB_BOOT_TYPE = 5
+};
+
+#endif
diff --git a/drivers/staging/r8188eu/include/wifi.h b/drivers/staging/r8188eu/include/wifi.h
new file mode 100644
index 000000000000..33a7e6c19d04
--- /dev/null
+++ b/drivers/staging/r8188eu/include/wifi.h
@@ -0,0 +1,1105 @@
+/******************************************************************************
+ *
+ * Copyright(c) 2007 - 2012 Realtek Corporation. All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of version 2 of the GNU General Public License as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
+ * more details.
+ *
+ * You should have received a copy of the GNU General Public License along with
+ * this program; if not, write to the Free Software Foundation, Inc.,
+ * 51 Franklin Street, Fifth Floor, Boston, MA 02110, USA
+ *
+ *
+ ******************************************************************************/
+#ifndef _WIFI_H_
+#define _WIFI_H_
+
+#include <linux/ieee80211.h>
+
+#ifdef BIT
+/* error "BIT define occurred earlier elsewhere!\n" */
+#undef BIT
+#endif
+#define BIT(x) (1 << (x))
+
+#define WLAN_ETHHDR_LEN 14
+#define WLAN_ETHADDR_LEN 6
+#define WLAN_IEEE_OUI_LEN 3
+#define WLAN_ADDR_LEN 6
+#define WLAN_CRC_LEN 4
+#define WLAN_BSSID_LEN 6
+#define WLAN_BSS_TS_LEN 8
+#define WLAN_HDR_A3_LEN 24
+#define WLAN_HDR_A4_LEN 30
+#define WLAN_HDR_A3_QOS_LEN 26
+#define WLAN_HDR_A4_QOS_LEN 32
+#define WLAN_SSID_MAXLEN 32
+#define WLAN_DATA_MAXLEN 2312
+
+#define WLAN_A3_PN_OFFSET 24
+#define WLAN_A4_PN_OFFSET 30
+
+#define WLAN_MIN_ETHFRM_LEN 60
+#define WLAN_MAX_ETHFRM_LEN 1514
+#define WLAN_ETHHDR_LEN 14
+
+#define P80211CAPTURE_VERSION 0x80211001
+
+/* This value is tested by WiFi 11n Test Plan 5.2.3. */
+/* This test verifies the WLAN NIC can update the NAV through sending
+ * the CTS with large duration. */
+#define WiFiNavUpperUs 30000 /* 30 ms */
+
+enum WIFI_FRAME_TYPE {
+ WIFI_MGT_TYPE = (0),
+ WIFI_CTRL_TYPE = (BIT(2)),
+ WIFI_DATA_TYPE = (BIT(3)),
+ WIFI_QOS_DATA_TYPE = (BIT(7)|BIT(3)), /* QoS Data */
+};
+
+enum WIFI_FRAME_SUBTYPE {
+ /* below is for mgt frame */
+ WIFI_ASSOCREQ = (0 | WIFI_MGT_TYPE),
+ WIFI_ASSOCRSP = (BIT(4) | WIFI_MGT_TYPE),
+ WIFI_REASSOCREQ = (BIT(5) | WIFI_MGT_TYPE),
+ WIFI_REASSOCRSP = (BIT(5) | BIT(4) | WIFI_MGT_TYPE),
+ WIFI_PROBEREQ = (BIT(6) | WIFI_MGT_TYPE),
+ WIFI_PROBERSP = (BIT(6) | BIT(4) | WIFI_MGT_TYPE),
+ WIFI_BEACON = (BIT(7) | WIFI_MGT_TYPE),
+ WIFI_ATIM = (BIT(7) | BIT(4) | WIFI_MGT_TYPE),
+ WIFI_DISASSOC = (BIT(7) | BIT(5) | WIFI_MGT_TYPE),
+ WIFI_AUTH = (BIT(7) | BIT(5) | BIT(4) | WIFI_MGT_TYPE),
+ WIFI_DEAUTH = (BIT(7) | BIT(6) | WIFI_MGT_TYPE),
+ WIFI_ACTION = (BIT(7) | BIT(6) | BIT(4) | WIFI_MGT_TYPE),
+
+ /* below is for control frame */
+ WIFI_PSPOLL = (BIT(7) | BIT(5) | WIFI_CTRL_TYPE),
+ WIFI_RTS = (BIT(7) | BIT(5) | BIT(4) | WIFI_CTRL_TYPE),
+ WIFI_CTS = (BIT(7) | BIT(6) | WIFI_CTRL_TYPE),
+ WIFI_ACK = (BIT(7) | BIT(6) | BIT(4) | WIFI_CTRL_TYPE),
+ WIFI_CFEND = (BIT(7) | BIT(6) | BIT(5) | WIFI_CTRL_TYPE),
+ WIFI_CFEND_CFACK = (BIT(7) | BIT(6) | BIT(5) | BIT(4) |
+ WIFI_CTRL_TYPE),
+
+ /* below is for data frame */
+ WIFI_DATA = (0 | WIFI_DATA_TYPE),
+ WIFI_DATA_CFACK = (BIT(4) | WIFI_DATA_TYPE),
+ WIFI_DATA_CFPOLL = (BIT(5) | WIFI_DATA_TYPE),
+ WIFI_DATA_CFACKPOLL = (BIT(5) | BIT(4) | WIFI_DATA_TYPE),
+ WIFI_DATA_NULL = (BIT(6) | WIFI_DATA_TYPE),
+ WIFI_CF_ACK = (BIT(6) | BIT(4) | WIFI_DATA_TYPE),
+ WIFI_CF_POLL = (BIT(6) | BIT(5) | WIFI_DATA_TYPE),
+ WIFI_CF_ACKPOLL = (BIT(6) | BIT(5) | BIT(4) | WIFI_DATA_TYPE),
+ WIFI_QOS_DATA_NULL = (BIT(6) | WIFI_QOS_DATA_TYPE),
+};
+
+enum WIFI_REASON_CODE {
+ _RSON_RESERVED_ = 0,
+ _RSON_UNSPECIFIED_ = 1,
+ _RSON_AUTH_NO_LONGER_VALID_ = 2,
+ _RSON_DEAUTH_STA_LEAVING_ = 3,
+ _RSON_INACTIVITY_ = 4,
+ _RSON_UNABLE_HANDLE_ = 5,
+ _RSON_CLS2_ = 6,
+ _RSON_CLS3_ = 7,
+ _RSON_DISAOC_STA_LEAVING_ = 8,
+ _RSON_ASOC_NOT_AUTH_ = 9,
+
+ /* WPA reason */
+ _RSON_INVALID_IE_ = 13,
+ _RSON_MIC_FAILURE_ = 14,
+ _RSON_4WAY_HNDSHK_TIMEOUT_ = 15,
+ _RSON_GROUP_KEY_UPDATE_TIMEOUT_ = 16,
+ _RSON_DIFF_IE_ = 17,
+ _RSON_MLTCST_CIPHER_NOT_VALID_ = 18,
+ _RSON_UNICST_CIPHER_NOT_VALID_ = 19,
+ _RSON_AKMP_NOT_VALID_ = 20,
+ _RSON_UNSUPPORT_RSNE_VER_ = 21,
+ _RSON_INVALID_RSNE_CAP_ = 22,
+ _RSON_IEEE_802DOT1X_AUTH_FAIL_ = 23,
+
+ /* belowing are Realtek definition */
+ _RSON_PMK_NOT_AVAILABLE_ = 24,
+ _RSON_TDLS_TEAR_TOOFAR_ = 25,
+ _RSON_TDLS_TEAR_UN_RSN_ = 26,
+};
+
+/* Reason codes (IEEE 802.11-2007, 7.3.1.7, Table 7-22)
+
+#define WLAN_REASON_UNSPECIFIED 1
+#define WLAN_REASON_PREV_AUTH_NOT_VALID 2
+#define WLAN_REASON_DEAUTH_LEAVING 3
+#define WLAN_REASON_DISASSOC_DUE_TO_INACTIVITY 4
+#define WLAN_REASON_DISASSOC_AP_BUSY 5
+#define WLAN_REASON_CLASS2_FRAME_FROM_NONAUTH_STA 6
+#define WLAN_REASON_CLASS3_FRAME_FROM_NONASSOC_STA 7
+#define WLAN_REASON_DISASSOC_STA_HAS_LEFT 8
+#define WLAN_REASON_STA_REQ_ASSOC_WITHOUT_AUTH 9 */
+/* IEEE 802.11h */
+#define WLAN_REASON_PWR_CAPABILITY_NOT_VALID 10
+#define WLAN_REASON_SUPPORTED_CHANNEL_NOT_VALID 11
+
+/* IEEE 802.11i
+#define WLAN_REASON_INVALID_IE 13
+#define WLAN_REASON_MICHAEL_MIC_FAILURE 14
+#define WLAN_REASON_4WAY_HANDSHAKE_TIMEOUT 15
+#define WLAN_REASON_GROUP_KEY_UPDATE_TIMEOUT 16
+#define WLAN_REASON_IE_IN_4WAY_DIFFERS 17
+#define WLAN_REASON_GROUP_CIPHER_NOT_VALID 18
+#define WLAN_REASON_PAIRWISE_CIPHER_NOT_VALID 19
+#define WLAN_REASON_AKMP_NOT_VALID 20
+#define WLAN_REASON_UNSUPPORTED_RSN_IE_VERSION 21
+#define WLAN_REASON_INVALID_RSN_IE_CAPAB 22
+#define WLAN_REASON_IEEE_802_1X_AUTH_FAILED 23
+#define WLAN_REASON_CIPHER_SUITE_REJECTED 24 */
+
+enum WIFI_STATUS_CODE {
+ _STATS_SUCCESSFUL_ = 0,
+ _STATS_FAILURE_ = 1,
+ _STATS_CAP_FAIL_ = 10,
+ _STATS_NO_ASOC_ = 11,
+ _STATS_OTHER_ = 12,
+ _STATS_NO_SUPP_ALG_ = 13,
+ _STATS_OUT_OF_AUTH_SEQ_ = 14,
+ _STATS_CHALLENGE_FAIL_ = 15,
+ _STATS_AUTH_TIMEOUT_ = 16,
+ _STATS_UNABLE_HANDLE_STA_ = 17,
+ _STATS_RATE_FAIL_ = 18,
+};
+
+/* Status codes (IEEE 802.11-2007, 7.3.1.9, Table 7-23)
+#define WLAN_STATUS_SUCCESS 0
+#define WLAN_STATUS_UNSPECIFIED_FAILURE 1
+#define WLAN_STATUS_CAPS_UNSUPPORTED 10
+#define WLAN_STATUS_REASSOC_NO_ASSOC 11
+#define WLAN_STATUS_ASSOC_DENIED_UNSPEC 12
+#define WLAN_STATUS_NOT_SUPPORTED_AUTH_ALG 13
+#define WLAN_STATUS_UNKNOWN_AUTH_TRANSACTION 14
+#define WLAN_STATUS_CHALLENGE_FAIL 15
+#define WLAN_STATUS_AUTH_TIMEOUT 16
+#define WLAN_STATUS_AP_UNABLE_TO_HANDLE_NEW_STA 17
+#define WLAN_STATUS_ASSOC_DENIED_RATES 18 */
+
+/* entended */
+/* IEEE 802.11b */
+#define WLAN_STATUS_ASSOC_DENIED_NOSHORT 19
+#define WLAN_STATUS_ASSOC_DENIED_NOPBCC 20
+#define WLAN_STATUS_ASSOC_DENIED_NOAGILITY 21
+/* IEEE 802.11h */
+#define WLAN_STATUS_SPEC_MGMT_REQUIRED 22
+#define WLAN_STATUS_PWR_CAPABILITY_NOT_VALID 23
+#define WLAN_STATUS_SUPPORTED_CHANNEL_NOT_VALID 24
+/* IEEE 802.11g */
+#define WLAN_STATUS_ASSOC_DENIED_NO_SHORT_SLOT_TIME 25
+#define WLAN_STATUS_ASSOC_DENIED_NO_ER_PBCC 26
+#define WLAN_STATUS_ASSOC_DENIED_NO_DSSS_OFDM 27
+/* IEEE 802.11w */
+#define WLAN_STATUS_ASSOC_REJECTED_TEMPORARILY 30
+#define WLAN_STATUS_ROBUST_MGMT_FRAME_POLICY_VIOLATION 31
+/* IEEE 802.11i */
+#define WLAN_STATUS_INVALID_IE 40
+#define WLAN_STATUS_GROUP_CIPHER_NOT_VALID 41
+#define WLAN_STATUS_PAIRWISE_CIPHER_NOT_VALID 42
+#define WLAN_STATUS_AKMP_NOT_VALID 43
+#define WLAN_STATUS_UNSUPPORTED_RSN_IE_VERSION 44
+#define WLAN_STATUS_INVALID_RSN_IE_CAPAB 45
+#define WLAN_STATUS_CIPHER_REJECTED_PER_POLICY 46
+#define WLAN_STATUS_TS_NOT_CREATED 47
+#define WLAN_STATUS_DIRECT_LINK_NOT_ALLOWED 48
+#define WLAN_STATUS_DEST_STA_NOT_PRESENT 49
+#define WLAN_STATUS_DEST_STA_NOT_QOS_STA 50
+#define WLAN_STATUS_ASSOC_DENIED_LISTEN_INT_TOO_LARGE 51
+/* IEEE 802.11r */
+#define WLAN_STATUS_INVALID_FT_ACTION_FRAME_COUNT 52
+#define WLAN_STATUS_INVALID_PMKID 53
+#define WLAN_STATUS_INVALID_MDIE 54
+#define WLAN_STATUS_INVALID_FTIE 55
+
+enum WIFI_REG_DOMAIN {
+ DOMAIN_FCC = 1,
+ DOMAIN_IC = 2,
+ DOMAIN_ETSI = 3,
+ DOMAIN_SPA = 4,
+ DOMAIN_FRANCE = 5,
+ DOMAIN_MKK = 6,
+ DOMAIN_ISRAEL = 7,
+ DOMAIN_MKK1 = 8,
+ DOMAIN_MKK2 = 9,
+ DOMAIN_MKK3 = 10,
+ DOMAIN_MAX
+};
+
+#define _TO_DS_ BIT(8)
+#define _FROM_DS_ BIT(9)
+#define _MORE_FRAG_ BIT(10)
+#define _RETRY_ BIT(11)
+#define _PWRMGT_ BIT(12)
+#define _MORE_DATA_ BIT(13)
+#define _PRIVACY_ BIT(14)
+#define _ORDER_ BIT(15)
+
+#define SetToDs(pbuf) \
+ *(__le16 *)(pbuf) |= cpu_to_le16(_TO_DS_)
+
+#define GetToDs(pbuf) (((*(__le16 *)(pbuf)) & cpu_to_le16(_TO_DS_)) != 0)
+
+#define ClearToDs(pbuf) \
+ *(__le16 *)(pbuf) &= (~cpu_to_le16(_TO_DS_))
+
+#define SetFrDs(pbuf) \
+ *(__le16 *)(pbuf) |= cpu_to_le16(_FROM_DS_)
+
+#define GetFrDs(pbuf) (((*(__le16 *)(pbuf)) & cpu_to_le16(_FROM_DS_)) != 0)
+
+#define ClearFrDs(pbuf) \
+ *(__le16 *)(pbuf) &= (~cpu_to_le16(_FROM_DS_))
+
+#define get_tofr_ds(pframe) ((GetToDs(pframe) << 1) | GetFrDs(pframe))
+
+#define SetMFrag(pbuf) \
+ *(__le16 *)(pbuf) |= cpu_to_le16(_MORE_FRAG_)
+
+#define GetMFrag(pbuf) (((*(__le16 *)(pbuf)) & cpu_to_le16(_MORE_FRAG_)) != 0)
+
+#define ClearMFrag(pbuf) \
+ *(__le16 *)(pbuf) &= (~cpu_to_le16(_MORE_FRAG_))
+
+#define SetRetry(pbuf) \
+ *(__le16 *)(pbuf) |= cpu_to_le16(_RETRY_)
+
+#define GetRetry(pbuf) (((*(__le16 *)(pbuf)) & cpu_to_le16(_RETRY_)) != 0)
+
+#define ClearRetry(pbuf) \
+ *(__le16 *)(pbuf) &= (~cpu_to_le16(_RETRY_))
+
+#define SetPwrMgt(pbuf) \
+ *(__le16 *)(pbuf) |= cpu_to_le16(_PWRMGT_)
+
+#define GetPwrMgt(pbuf) (((*(__le16 *)(pbuf)) & cpu_to_le16(_PWRMGT_)) != 0)
+
+#define ClearPwrMgt(pbuf) \
+ *(__le16 *)(pbuf) &= (~cpu_to_le16(_PWRMGT_))
+
+#define SetMData(pbuf) \
+ *(__le16 *)(pbuf) |= cpu_to_le16(_MORE_DATA_)
+
+#define GetMData(pbuf) (((*(__le16 *)(pbuf)) & cpu_to_le16(_MORE_DATA_)) != 0)
+
+#define ClearMData(pbuf) \
+ *(__le16 *)(pbuf) &= (~cpu_to_le16(_MORE_DATA_))
+
+#define SetPrivacy(pbuf) \
+ *(__le16 *)(pbuf) |= cpu_to_le16(_PRIVACY_)
+
+#define GetPrivacy(pbuf) \
+ (((*(__le16 *)(pbuf)) & cpu_to_le16(_PRIVACY_)) != 0)
+
+#define ClearPrivacy(pbuf) \
+ *(__le16 *)(pbuf) &= (~cpu_to_le16(_PRIVACY_))
+
+#define GetOrder(pbuf) \
+ (((*(__le16 *)(pbuf)) & cpu_to_le16(_ORDER_)) != 0)
+
+#define GetFrameType(pbuf) \
+ (le16_to_cpu(*(__le16 *)(pbuf)) & (BIT(3) | BIT(2)))
+
+#define SetFrameType(pbuf, type) \
+ do { \
+ *(unsigned short *)(pbuf) &= __constant_cpu_to_le16(~(BIT(3) | BIT(2))); \
+ *(unsigned short *)(pbuf) |= __constant_cpu_to_le16(type); \
+ } while (0)
+
+#define GetFrameSubType(pbuf) (le16_to_cpu(*(__le16 *)(pbuf)) & (BIT(7) |\
+ BIT(6) | BIT(5) | BIT(4) | BIT(3) | BIT(2)))
+
+#define SetFrameSubType(pbuf, type) \
+ do { \
+ *(__le16 *)(pbuf) &= cpu_to_le16(~(BIT(7) | BIT(6) | \
+ BIT(5) | BIT(4) | BIT(3) | BIT(2))); \
+ *(__le16 *)(pbuf) |= cpu_to_le16(type); \
+ } while (0)
+
+#define GetSequence(pbuf) \
+ (le16_to_cpu(*(__le16 *)((size_t)(pbuf) + 22)) >> 4)
+
+#define GetFragNum(pbuf) \
+ (le16_to_cpu(*(__le16 *)((size_t)(pbuf) + 22)) & 0x0f)
+
+#define GetTupleCache(pbuf) \
+ (cpu_to_le16(*(unsigned short *)((size_t)(pbuf) + 22)))
+
+#define SetFragNum(pbuf, num) \
+ do { \
+ *(unsigned short *)((size_t)(pbuf) + 22) = \
+ ((*(unsigned short *)((size_t)(pbuf) + 22)) & \
+ le16_to_cpu(~(0x000f))) | \
+ cpu_to_le16(0x0f & (num)); \
+ } while (0)
+
+#define SetSeqNum(pbuf, num) \
+ do { \
+ *(__le16 *)((size_t)(pbuf) + 22) = \
+ ((*(__le16 *)((size_t)(pbuf) + 22)) & cpu_to_le16((unsigned short)0x000f)) | \
+ cpu_to_le16((unsigned short)(0xfff0 & (num << 4))); \
+ } while (0)
+
+#define SetDuration(pbuf, dur) \
+ *(__le16 *)((size_t)(pbuf) + 2) = cpu_to_le16(0xffff & (dur))
+
+#define SetPriority(pbuf, tid) \
+ *(__le16 *)(pbuf) |= cpu_to_le16(tid & 0xf)
+
+#define GetPriority(pbuf) ((le16_to_cpu(*(__le16 *)(pbuf))) & 0xf)
+
+#define SetEOSP(pbuf, eosp) \
+ *(__le16 *)(pbuf) |= cpu_to_le16((eosp & 1) << 4)
+
+#define SetAckpolicy(pbuf, ack) \
+ *(__le16 *)(pbuf) |= cpu_to_le16((ack & 3) << 5)
+
+#define GetAckpolicy(pbuf) (((le16_to_cpu(*(__le16 *)pbuf)) >> 5) & 0x3)
+
+#define GetAMsdu(pbuf) (((le16_to_cpu(*(__le16 *)pbuf)) >> 7) & 0x1)
+
+#define SetAMsdu(pbuf, amsdu) \
+ *(__le16 *)(pbuf) |= cpu_to_le16((amsdu & 1) << 7)
+
+#define GetAid(pbuf) (le16_to_cpu(*(__le16 *)((size_t)(pbuf) + 2)) & 0x3fff)
+
+#define GetTid(pbuf) (le16_to_cpu(*(__le16 *)((size_t)(pbuf) + \
+ (((GetToDs(pbuf)<<1) | GetFrDs(pbuf)) == 3 ? \
+ 30 : 24))) & 0x000f)
+
+#define GetAddr1Ptr(pbuf) ((unsigned char *)((size_t)(pbuf) + 4))
+
+#define GetAddr2Ptr(pbuf) ((unsigned char *)((size_t)(pbuf) + 10))
+
+#define GetAddr3Ptr(pbuf) ((unsigned char *)((size_t)(pbuf) + 16))
+
+#define GetAddr4Ptr(pbuf) ((unsigned char *)((size_t)(pbuf) + 24))
+
+#define MacAddr_isBcst(addr) \
+ ( \
+ ((addr[0] == 0xff) && (addr[1] == 0xff) && \
+ (addr[2] == 0xff) && (addr[3] == 0xff) && \
+ (addr[4] == 0xff) && (addr[5] == 0xff)) ? true : false \
+)
+
+static inline int IS_MCAST(unsigned char *da)
+{
+ if ((*da) & 0x01)
+ return true;
+ else
+ return false;
+}
+
+static inline unsigned char *get_da(unsigned char *pframe)
+{
+ unsigned char *da;
+ unsigned int to_fr_ds = (GetToDs(pframe) << 1) | GetFrDs(pframe);
+
+ switch (to_fr_ds) {
+ case 0x00: /* ToDs=0, FromDs=0 */
+ da = GetAddr1Ptr(pframe);
+ break;
+ case 0x01: /* ToDs=0, FromDs=1 */
+ da = GetAddr1Ptr(pframe);
+ break;
+ case 0x02: /* ToDs=1, FromDs=0 */
+ da = GetAddr3Ptr(pframe);
+ break;
+ default: /* ToDs=1, FromDs=1 */
+ da = GetAddr3Ptr(pframe);
+ break;
+ }
+ return da;
+}
+
+static inline unsigned char *get_sa(unsigned char *pframe)
+{
+ unsigned char *sa;
+ unsigned int to_fr_ds = (GetToDs(pframe) << 1) | GetFrDs(pframe);
+
+ switch (to_fr_ds) {
+ case 0x00: /* ToDs=0, FromDs=0 */
+ sa = GetAddr2Ptr(pframe);
+ break;
+ case 0x01: /* ToDs=0, FromDs=1 */
+ sa = GetAddr3Ptr(pframe);
+ break;
+ case 0x02: /* ToDs=1, FromDs=0 */
+ sa = GetAddr2Ptr(pframe);
+ break;
+ default: /* ToDs=1, FromDs=1 */
+ sa = GetAddr4Ptr(pframe);
+ break;
+ }
+ return sa;
+}
+
+static inline unsigned char *get_hdr_bssid(unsigned char *pframe)
+{
+ unsigned char *sa;
+ unsigned int to_fr_ds = (GetToDs(pframe) << 1) | GetFrDs(pframe);
+
+ switch (to_fr_ds) {
+ case 0x00: /* ToDs=0, FromDs=0 */
+ sa = GetAddr3Ptr(pframe);
+ break;
+ case 0x01: /* ToDs=0, FromDs=1 */
+ sa = GetAddr2Ptr(pframe);
+ break;
+ case 0x02: /* ToDs=1, FromDs=0 */
+ sa = GetAddr1Ptr(pframe);
+ break;
+ case 0x03: /* ToDs=1, FromDs=1 */
+ sa = GetAddr1Ptr(pframe);
+ break;
+ default:
+ sa = NULL; /* */
+ break;
+ }
+ return sa;
+}
+
+static inline int IsFrameTypeCtrl(unsigned char *pframe)
+{
+ if (WIFI_CTRL_TYPE == GetFrameType(pframe))
+ return true;
+ else
+ return false;
+}
+/*-----------------------------------------------------------------------------
+ Below is for the security related definition
+------------------------------------------------------------------------------*/
+#define _RESERVED_FRAME_TYPE_ 0
+#define _SKB_FRAME_TYPE_ 2
+#define _PRE_ALLOCMEM_ 1
+#define _PRE_ALLOCHDR_ 3
+#define _PRE_ALLOCLLCHDR_ 4
+#define _PRE_ALLOCICVHDR_ 5
+#define _PRE_ALLOCMICHDR_ 6
+
+#define _SIFSTIME_ \
+ ((priv->pmib->dot11BssType.net_work_type & WIRELESS_11A) ? 16 : 10)
+#define _ACKCTSLNG_ 14 /* 14 bytes long, including crclng */
+#define _CRCLNG_ 4
+
+#define _ASOCREQ_IE_OFFSET_ 4 /* excluding wlan_hdr */
+#define _ASOCRSP_IE_OFFSET_ 6
+#define _REASOCREQ_IE_OFFSET_ 10
+#define _REASOCRSP_IE_OFFSET_ 6
+#define _PROBEREQ_IE_OFFSET_ 0
+#define _PROBERSP_IE_OFFSET_ 12
+#define _AUTH_IE_OFFSET_ 6
+#define _DEAUTH_IE_OFFSET_ 0
+#define _BEACON_IE_OFFSET_ 12
+#define _PUBLIC_ACTION_IE_OFFSET_ 8
+
+#define _FIXED_IE_LENGTH_ _BEACON_IE_OFFSET_
+
+#define _SSID_IE_ 0
+#define _SUPPORTEDRATES_IE_ 1
+#define _DSSET_IE_ 3
+#define _TIM_IE_ 5
+#define _IBSS_PARA_IE_ 6
+#define _COUNTRY_IE_ 7
+#define _CHLGETXT_IE_ 16
+#define _SUPPORTED_CH_IE_ 36
+#define _CH_SWTICH_ANNOUNCE_ 37 /* Secondary Channel Offset */
+#define _RSN_IE_2_ 48
+#define _SSN_IE_1_ 221
+#define _ERPINFO_IE_ 42
+#define _EXT_SUPPORTEDRATES_IE_ 50
+
+#define _HT_CAPABILITY_IE_ 45
+#define _FTIE_ 55
+#define _TIMEOUT_ITVL_IE_ 56
+#define _SRC_IE_ 59
+#define _HT_EXTRA_INFO_IE_ 61
+#define _HT_ADD_INFO_IE_ 61 /* _HT_EXTRA_INFO_IE_ */
+#define _WAPI_IE_ 68
+
+#define EID_BSSCoexistence 72 /* 20/40 BSS Coexistence */
+#define EID_BSSIntolerantChlReport 73
+#define _RIC_Descriptor_IE_ 75
+
+#define _LINK_ID_IE_ 101
+#define _CH_SWITCH_TIMING_ 104
+#define _PTI_BUFFER_STATUS_ 106
+#define _EXT_CAP_IE_ 127
+#define _VENDOR_SPECIFIC_IE_ 221
+
+#define _RESERVED47_ 47
+
+/* ---------------------------------------------------------------------------
+ Below is the fixed elements...
+-----------------------------------------------------------------------------*/
+#define _AUTH_ALGM_NUM_ 2
+#define _AUTH_SEQ_NUM_ 2
+#define _BEACON_ITERVAL_ 2
+#define _CAPABILITY_ 2
+#define _CURRENT_APADDR_ 6
+#define _LISTEN_INTERVAL_ 2
+#define _RSON_CODE_ 2
+#define _ASOC_ID_ 2
+#define _STATUS_CODE_ 2
+#define _TIMESTAMP_ 8
+
+#define AUTH_ODD_TO 0
+#define AUTH_EVEN_TO 1
+
+#define WLAN_ETHCONV_ENCAP 1
+#define WLAN_ETHCONV_RFC1042 2
+#define WLAN_ETHCONV_8021h 3
+
+#define cap_ESS BIT(0)
+#define cap_IBSS BIT(1)
+#define cap_CFPollable BIT(2)
+#define cap_CFRequest BIT(3)
+#define cap_Privacy BIT(4)
+#define cap_ShortPremble BIT(5)
+#define cap_PBCC BIT(6)
+#define cap_ChAgility BIT(7)
+#define cap_SpecMgmt BIT(8)
+#define cap_QoSi BIT(9)
+#define cap_ShortSlot BIT(10)
+
+/*-----------------------------------------------------------------------------
+ Below is the definition for 802.11i / 802.1x
+------------------------------------------------------------------------------*/
+#define _IEEE8021X_MGT_ 1 /* WPA */
+#define _IEEE8021X_PSK_ 2 /* WPA with pre-shared key */
+
+/*
+#define _NO_PRIVACY_ 0
+#define _WEP_40_PRIVACY_ 1
+#define _TKIP_PRIVACY_ 2
+#define _WRAP_PRIVACY_ 3
+#define _CCMP_PRIVACY_ 4
+#define _WEP_104_PRIVACY_ 5
+#define _WEP_WPA_MIXED_PRIVACY_ 6 WEP + WPA
+*/
+
+/*-----------------------------------------------------------------------------
+ Below is the definition for WMM
+------------------------------------------------------------------------------*/
+#define _WMM_IE_Length_ 7 /* for WMM STA */
+#define _WMM_Para_Element_Length_ 24
+
+/*-----------------------------------------------------------------------------
+ Below is the definition for 802.11n
+------------------------------------------------------------------------------*/
+
+#define SetOrderBit(pbuf) \
+ do { \
+ *(unsigned short *)(pbuf) |= cpu_to_le16(_ORDER_); \
+ } while (0)
+
+#define GetOrderBit(pbuf) \
+ (((*(unsigned short *)(pbuf)) & le16_to_cpu(_ORDER_)) != 0)
+
+/**
+ * struct rtw_ieee80211_bar - HT Block Ack Request
+ *
+ * This structure refers to "HT BlockAckReq" as
+ * described in 802.11n draft section 7.2.1.7.1
+ */
+struct rtw_ieee80211_bar {
+ __le16 frame_control;
+ __le16 duration;
+ unsigned char ra[ETH_ALEN];
+ unsigned char ta[ETH_ALEN];
+ __le16 control;
+ __le16 start_seq_num;
+} __packed;
+
+/* 802.11 BAR control masks */
+#define IEEE80211_BAR_CTRL_ACK_POLICY_NORMAL 0x0000
+#define IEEE80211_BAR_CTRL_CBMTID_COMPRESSED_BA 0x0004
+
+/**
+ * struct ieee80211_ht_cap - HT additional information
+ *
+ * This structure refers to "HT information element" as
+ * described in 802.11n draft section 7.3.2.53
+ */
+struct ieee80211_ht_addt_info {
+ unsigned char control_chan;
+ unsigned char ht_param;
+ __le16 operation_mode;
+ __le16 stbc_param;
+ unsigned char basic_set[16];
+} __packed;
+
+struct HT_caps_element {
+ union {
+ struct {
+ __le16 HT_caps_info;
+ unsigned char AMPDU_para;
+ unsigned char MCS_rate[16];
+ __le16 HT_ext_caps;
+ __le16 Beamforming_caps;
+ unsigned char ASEL_caps;
+ } HT_cap_element;
+ unsigned char HT_cap[26];
+ } u;
+} __packed;
+
+struct HT_info_element {
+ unsigned char primary_channel;
+ unsigned char infos[5];
+ unsigned char MCS_rate[16];
+} __packed;
+
+struct AC_param {
+ unsigned char ACI_AIFSN;
+ unsigned char CW;
+ __le16 TXOP_limit;
+} __packed;
+
+struct WMM_para_element {
+ unsigned char QoS_info;
+ unsigned char reserved;
+ struct AC_param ac_param[4];
+} __packed;
+
+struct ADDBA_request {
+ unsigned char action_code;
+ unsigned char dialog_token;
+ __le16 BA_para_set;
+ __le16 BA_timeout_value;
+ __le16 BA_starting_seqctrl;
+} __packed;
+
+enum ht_cap_ampdu_factor {
+ MAX_AMPDU_FACTOR_8K = 0,
+ MAX_AMPDU_FACTOR_16K = 1,
+ MAX_AMPDU_FACTOR_32K = 2,
+ MAX_AMPDU_FACTOR_64K = 3,
+};
+
+/* 802.11n HT capabilities masks */
+#define IEEE80211_HT_CAP_SUP_WIDTH 0x0002
+#define IEEE80211_HT_CAP_SM_PS 0x000C
+#define IEEE80211_HT_CAP_GRN_FLD 0x0010
+#define IEEE80211_HT_CAP_SGI_20 0x0020
+#define IEEE80211_HT_CAP_SGI_40 0x0040
+#define IEEE80211_HT_CAP_TX_STBC 0x0080
+#define IEEE80211_HT_CAP_RX_STBC 0x0300
+#define IEEE80211_HT_CAP_DELAY_BA 0x0400
+#define IEEE80211_HT_CAP_MAX_AMSDU 0x0800
+#define IEEE80211_HT_CAP_DSSSCCK40 0x1000
+/* 802.11n HT capability AMPDU settings */
+#define IEEE80211_HT_CAP_AMPDU_FACTOR 0x03
+#define IEEE80211_HT_CAP_AMPDU_DENSITY 0x1C
+/* 802.11n HT capability MSC set */
+#define IEEE80211_SUPP_MCS_SET_UEQM 4
+#define IEEE80211_HT_CAP_MAX_STREAMS 4
+#define IEEE80211_SUPP_MCS_SET_LEN 10
+/* maximum streams the spec allows */
+#define IEEE80211_HT_CAP_MCS_TX_DEFINED 0x01
+#define IEEE80211_HT_CAP_MCS_TX_RX_DIFF 0x02
+#define IEEE80211_HT_CAP_MCS_TX_STREAMS 0x0C
+#define IEEE80211_HT_CAP_MCS_TX_UEQM 0x10
+/* 802.11n HT IE masks */
+#define IEEE80211_HT_IE_CHA_SEC_OFFSET 0x03
+#define IEEE80211_HT_IE_CHA_SEC_NONE 0x00
+#define IEEE80211_HT_IE_CHA_SEC_ABOVE 0x01
+#define IEEE80211_HT_IE_CHA_SEC_BELOW 0x03
+#define IEEE80211_HT_IE_CHA_WIDTH 0x04
+#define IEEE80211_HT_IE_HT_PROTECTION 0x0003
+#define IEEE80211_HT_IE_NON_GF_STA_PRSNT 0x0004
+#define IEEE80211_HT_IE_NON_HT_STA_PRSNT 0x0010
+
+/* block-ack parameters */
+#define IEEE80211_ADDBA_PARAM_POLICY_MASK 0x0002
+#define IEEE80211_ADDBA_PARAM_TID_MASK 0x003C
+#define RTW_IEEE80211_ADDBA_PARAM_BUF_SIZE_MASK 0xFFC0
+#define IEEE80211_DELBA_PARAM_TID_MASK 0xF000
+#define IEEE80211_DELBA_PARAM_INITIATOR_MASK 0x0800
+
+/*
+ * A-PMDU buffer sizes
+ * According to IEEE802.11n spec size varies from 8K to 64K (in powers of 2)
+ */
+#define IEEE80211_MIN_AMPDU_BUF 0x8
+#if (LINUX_VERSION_CODE < KERNEL_VERSION(4,19,0))
+#define IEEE80211_MAX_AMPDU_BUF 0x40
+#endif
+
+/* Spatial Multiplexing Power Save Modes */
+#define WLAN_HT_CAP_SM_PS_STATIC 0
+#define WLAN_HT_CAP_SM_PS_DYNAMIC 1
+#define WLAN_HT_CAP_SM_PS_INVALID 2
+#define WLAN_HT_CAP_SM_PS_DISABLED 3
+
+#define OP_MODE_PURE 0
+#define OP_MODE_MAY_BE_LEGACY_STAS 1
+#define OP_MODE_20MHZ_HT_STA_ASSOCED 2
+#define OP_MODE_MIXED 3
+
+#define HT_INFO_HT_PARAM_SECONDARY_CHNL_OFF_MASK ((u8) BIT(0) | BIT(1))
+#define HT_INFO_HT_PARAM_SECONDARY_CHNL_ABOVE ((u8) BIT(0))
+#define HT_INFO_HT_PARAM_SECONDARY_CHNL_BELOW ((u8) BIT(0) | BIT(1))
+#define HT_INFO_HT_PARAM_REC_TRANS_CHNL_WIDTH ((u8) BIT(2))
+#define HT_INFO_HT_PARAM_RIFS_MODE ((u8) BIT(3))
+#define HT_INFO_HT_PARAM_CTRL_ACCESS_ONLY ((u8) BIT(4))
+#define HT_INFO_HT_PARAM_SRV_INTERVAL_GRANULARITY ((u8) BIT(5))
+
+#define HT_INFO_OPERATION_MODE_OP_MODE_MASK \
+ ((u16) (0x0001 | 0x0002))
+#define HT_INFO_OPERATION_MODE_OP_MODE_OFFSET 0
+#define HT_INFO_OPERATION_MODE_NON_GF_DEVS_PRESENT ((u8) BIT(2))
+#define HT_INFO_OPERATION_MODE_TRANSMIT_BURST_LIMIT ((u8) BIT(3))
+#define HT_INFO_OPERATION_MODE_NON_HT_STA_PRESENT ((u8) BIT(4))
+
+#define HT_INFO_STBC_PARAM_DUAL_BEACON ((u16) BIT(6))
+#define HT_INFO_STBC_PARAM_DUAL_STBC_PROTECT ((u16) BIT(7))
+#define HT_INFO_STBC_PARAM_SECONDARY_BC ((u16) BIT(8))
+#define HT_INFO_STBC_PARAM_LSIG_TXOP_PROTECT_ALLOWED ((u16) BIT(9))
+#define HT_INFO_STBC_PARAM_PCO_ACTIVE ((u16) BIT(10))
+#define HT_INFO_STBC_PARAM_PCO_PHASE ((u16) BIT(11))
+
+/* ===============WPS Section=============== */
+/* For WPSv1.0 */
+#define WPSOUI 0x0050f204
+/* WPS attribute ID */
+#define WPS_ATTR_VER1 0x104A
+#define WPS_ATTR_SIMPLE_CONF_STATE 0x1044
+#define WPS_ATTR_RESP_TYPE 0x103B
+#define WPS_ATTR_UUID_E 0x1047
+#define WPS_ATTR_MANUFACTURER 0x1021
+#define WPS_ATTR_MODEL_NAME 0x1023
+#define WPS_ATTR_MODEL_NUMBER 0x1024
+#define WPS_ATTR_SERIAL_NUMBER 0x1042
+#define WPS_ATTR_PRIMARY_DEV_TYPE 0x1054
+#define WPS_ATTR_SEC_DEV_TYPE_LIST 0x1055
+#define WPS_ATTR_DEVICE_NAME 0x1011
+#define WPS_ATTR_CONF_METHOD 0x1008
+#define WPS_ATTR_RF_BANDS 0x103C
+#define WPS_ATTR_DEVICE_PWID 0x1012
+#define WPS_ATTR_REQUEST_TYPE 0x103A
+#define WPS_ATTR_ASSOCIATION_STATE 0x1002
+#define WPS_ATTR_CONFIG_ERROR 0x1009
+#define WPS_ATTR_VENDOR_EXT 0x1049
+#define WPS_ATTR_SELECTED_REGISTRAR 0x1041
+
+/* Value of WPS attribute "WPS_ATTR_DEVICE_NAME */
+#define WPS_MAX_DEVICE_NAME_LEN 32
+
+/* Value of WPS Request Type Attribute */
+#define WPS_REQ_TYPE_ENROLLEE_INFO_ONLY 0x00
+#define WPS_REQ_TYPE_ENROLLEE_OPEN_8021X 0x01
+#define WPS_REQ_TYPE_REGISTRAR 0x02
+#define WPS_REQ_TYPE_WLAN_MANAGER_REGISTRAR 0x03
+
+/* Value of WPS Response Type Attribute */
+#define WPS_RESPONSE_TYPE_INFO_ONLY 0x00
+#define WPS_RESPONSE_TYPE_8021X 0x01
+#define WPS_RESPONSE_TYPE_REGISTRAR 0x02
+#define WPS_RESPONSE_TYPE_AP 0x03
+
+/* Value of WPS WiFi Simple Configuration State Attribute */
+#define WPS_WSC_STATE_NOT_CONFIG 0x01
+#define WPS_WSC_STATE_CONFIG 0x02
+
+/* Value of WPS Version Attribute */
+#define WPS_VERSION_1 0x10
+
+/* Value of WPS Configuration Method Attribute */
+#define WPS_CONFIG_METHOD_FLASH 0x0001
+#define WPS_CONFIG_METHOD_ETHERNET 0x0002
+#define WPS_CONFIG_METHOD_LABEL 0x0004
+#define WPS_CONFIG_METHOD_DISPLAY 0x0008
+#define WPS_CONFIG_METHOD_E_NFC 0x0010
+#define WPS_CONFIG_METHOD_I_NFC 0x0020
+#define WPS_CONFIG_METHOD_NFC 0x0040
+#define WPS_CONFIG_METHOD_PBC 0x0080
+#define WPS_CONFIG_METHOD_KEYPAD 0x0100
+#define WPS_CONFIG_METHOD_VPBC 0x0280
+#define WPS_CONFIG_METHOD_PPBC 0x0480
+#define WPS_CONFIG_METHOD_VDISPLAY 0x2008
+#define WPS_CONFIG_METHOD_PDISPLAY 0x4008
+
+/* Value of Category ID of WPS Primary Device Type Attribute */
+#define WPS_PDT_CID_DISPLAYS 0x0007
+#define WPS_PDT_CID_MULIT_MEDIA 0x0008
+#define WPS_PDT_CID_RTK_WIDI WPS_PDT_CID_MULIT_MEDIA
+
+/* Value of Sub Category ID of WPS Primary Device Type Attribute */
+#define WPS_PDT_SCID_MEDIA_SERVER 0x0005
+#define WPS_PDT_SCID_RTK_DMP WPS_PDT_SCID_MEDIA_SERVER
+
+/* Value of Device Password ID */
+#define WPS_DPID_P 0x0000
+#define WPS_DPID_USER_SPEC 0x0001
+#define WPS_DPID_MACHINE_SPEC 0x0002
+#define WPS_DPID_REKEY 0x0003
+#define WPS_DPID_PBC 0x0004
+#define WPS_DPID_REGISTRAR_SPEC 0x0005
+
+/* Value of WPS RF Bands Attribute */
+#define WPS_RF_BANDS_2_4_GHZ 0x01
+#define WPS_RF_BANDS_5_GHZ 0x02
+
+/* Value of WPS Association State Attribute */
+#define WPS_ASSOC_STATE_NOT_ASSOCIATED 0x00
+#define WPS_ASSOC_STATE_CONNECTION_SUCCESS 0x01
+#define WPS_ASSOC_STATE_CONFIGURATION_FAILURE 0x02
+#define WPS_ASSOC_STATE_ASSOCIATION_FAILURE 0x03
+#define WPS_ASSOC_STATE_IP_FAILURE 0x04
+
+/* =====================P2P Section===================== */
+/* For P2P */
+#define P2POUI 0x506F9A09
+
+/* P2P Attribute ID */
+#define P2P_ATTR_STATUS 0x00
+#define P2P_ATTR_MINOR_REASON_CODE 0x01
+#define P2P_ATTR_CAPABILITY 0x02
+#define P2P_ATTR_DEVICE_ID 0x03
+#define P2P_ATTR_GO_INTENT 0x04
+#define P2P_ATTR_CONF_TIMEOUT 0x05
+#define P2P_ATTR_LISTEN_CH 0x06
+#define P2P_ATTR_GROUP_BSSID 0x07
+#define P2P_ATTR_EX_LISTEN_TIMING 0x08
+#define P2P_ATTR_INTENTED_IF_ADDR 0x09
+#define P2P_ATTR_MANAGEABILITY 0x0A
+#define P2P_ATTR_CH_LIST 0x0B
+#define P2P_ATTR_NOA 0x0C
+#define P2P_ATTR_DEVICE_INFO 0x0D
+#define P2P_ATTR_GROUP_INFO 0x0E
+#define P2P_ATTR_GROUP_ID 0x0F
+#define P2P_ATTR_INTERFACE 0x10
+#define P2P_ATTR_OPERATING_CH 0x11
+#define P2P_ATTR_INVITATION_FLAGS 0x12
+
+/* Value of Status Attribute */
+#define P2P_STATUS_SUCCESS 0x00
+#define P2P_STATUS_FAIL_INFO_UNAVAILABLE 0x01
+#define P2P_STATUS_FAIL_INCOMPATIBLE_PARAM 0x02
+#define P2P_STATUS_FAIL_LIMIT_REACHED 0x03
+#define P2P_STATUS_FAIL_INVALID_PARAM 0x04
+#define P2P_STATUS_FAIL_REQUEST_UNABLE 0x05
+#define P2P_STATUS_FAIL_PREVOUS_PROTO_ERR 0x06
+#define P2P_STATUS_FAIL_NO_COMMON_CH 0x07
+#define P2P_STATUS_FAIL_UNKNOWN_P2PGROUP 0x08
+#define P2P_STATUS_FAIL_BOTH_GOINTENT_15 0x09
+#define P2P_STATUS_FAIL_INCOMPATIBLE_PROVSION 0x0A
+#define P2P_STATUS_FAIL_USER_REJECT 0x0B
+
+/* Value of Inviation Flags Attribute */
+#define P2P_INVITATION_FLAGS_PERSISTENT BIT(0)
+
+#define DMP_P2P_DEVCAP_SUPPORT (P2P_DEVCAP_SERVICE_DISCOVERY | \
+ P2P_DEVCAP_CLIENT_DISCOVERABILITY | \
+ P2P_DEVCAP_CONCURRENT_OPERATION | \
+ P2P_DEVCAP_INVITATION_PROC)
+
+#define DMP_P2P_GRPCAP_SUPPORT (P2P_GRPCAP_INTRABSS)
+
+/* Value of Device Capability Bitmap */
+#define P2P_DEVCAP_SERVICE_DISCOVERY BIT(0)
+#define P2P_DEVCAP_CLIENT_DISCOVERABILITY BIT(1)
+#define P2P_DEVCAP_CONCURRENT_OPERATION BIT(2)
+#define P2P_DEVCAP_INFRA_MANAGED BIT(3)
+#define P2P_DEVCAP_DEVICE_LIMIT BIT(4)
+#define P2P_DEVCAP_INVITATION_PROC BIT(5)
+
+/* Value of Group Capability Bitmap */
+#define P2P_GRPCAP_GO BIT(0)
+#define P2P_GRPCAP_PERSISTENT_GROUP BIT(1)
+#define P2P_GRPCAP_GROUP_LIMIT BIT(2)
+#define P2P_GRPCAP_INTRABSS BIT(3)
+#define P2P_GRPCAP_CROSS_CONN BIT(4)
+#define P2P_GRPCAP_PERSISTENT_RECONN BIT(5)
+#define P2P_GRPCAP_GROUP_FORMATION BIT(6)
+
+/* P2P Public Action Frame (Management Frame) */
+#define P2P_PUB_ACTION_ACTION 0x09
+
+/* P2P Public Action Frame Type */
+#define P2P_GO_NEGO_REQ 0
+#define P2P_GO_NEGO_RESP 1
+#define P2P_GO_NEGO_CONF 2
+#define P2P_INVIT_REQ 3
+#define P2P_INVIT_RESP 4
+#define P2P_DEVDISC_REQ 5
+#define P2P_DEVDISC_RESP 6
+#define P2P_PROVISION_DISC_REQ 7
+#define P2P_PROVISION_DISC_RESP 8
+
+/* P2P Action Frame Type */
+#define P2P_NOTICE_OF_ABSENCE 0
+#define P2P_PRESENCE_REQUEST 1
+#define P2P_PRESENCE_RESPONSE 2
+#define P2P_GO_DISC_REQUEST 3
+
+#define P2P_MAX_PERSISTENT_GROUP_NUM 10
+
+#define P2P_PROVISIONING_SCAN_CNT 3
+
+#define P2P_WILDCARD_SSID_LEN 7
+
+/* default value, used when: (1)p2p disabed or (2)p2p enabled
+ * but only do 1 scan phase */
+#define P2P_FINDPHASE_EX_NONE 0
+/* used when p2p enabled and want to do 1 scan phase and
+ * P2P_FINDPHASE_EX_MAX-1 find phase */
+#define P2P_FINDPHASE_EX_FULL 1
+#define P2P_FINDPHASE_EX_SOCIAL_FIRST (P2P_FINDPHASE_EX_FULL+1)
+#define P2P_FINDPHASE_EX_MAX 4
+#define P2P_FINDPHASE_EX_SOCIAL_LAST P2P_FINDPHASE_EX_MAX
+
+/* 5 seconds timeout for sending the provision discovery request */
+#define P2P_PROVISION_TIMEOUT 5000
+/* 3 seconds timeout for sending the prov disc request concurrent mode */
+#define P2P_CONCURRENT_PROVISION_TIME 3000
+/* 5 seconds timeout for receiving the group negotiation response */
+#define P2P_GO_NEGO_TIMEOUT 5000
+/* 3 seconds timeout for sending the negotiation request under concurrent mode */
+#define P2P_CONCURRENT_GO_NEGO_TIME 3000
+/* 100ms */
+#define P2P_TX_PRESCAN_TIMEOUT 100
+/* 5 seconds timeout for sending the invitation request */
+#define P2P_INVITE_TIMEOUT 5000
+/* 3 seconds timeout for sending the invitation request under concurrent mode */
+#define P2P_CONCURRENT_INVITE_TIME 3000
+/* 25 seconds timeout to reset the scan channel (based on channel plan) */
+#define P2P_RESET_SCAN_CH 25000
+#define P2P_MAX_INTENT 15
+
+#define P2P_MAX_NOA_NUM 2
+
+/* WPS Configuration Method */
+#define WPS_CM_NONE 0x0000
+#define WPS_CM_LABEL 0x0004
+#define WPS_CM_DISPLYA 0x0008
+#define WPS_CM_EXTERNAL_NFC_TOKEN 0x0010
+#define WPS_CM_INTEGRATED_NFC_TOKEN 0x0020
+#define WPS_CM_NFC_INTERFACE 0x0040
+#define WPS_CM_PUSH_BUTTON 0x0080
+#define WPS_CM_KEYPAD 0x0100
+#define WPS_CM_SW_PUHS_BUTTON 0x0280
+#define WPS_CM_HW_PUHS_BUTTON 0x0480
+#define WPS_CM_SW_DISPLAY_P 0x2008
+#define WPS_CM_LCD_DISPLAY_P 0x4008
+
+enum P2P_ROLE {
+ P2P_ROLE_DISABLE = 0,
+ P2P_ROLE_DEVICE = 1,
+ P2P_ROLE_CLIENT = 2,
+ P2P_ROLE_GO = 3
+};
+
+enum P2P_STATE {
+ P2P_STATE_NONE = 0, /* P2P disable */
+ /* P2P had enabled and do nothing */
+ P2P_STATE_IDLE = 1,
+ P2P_STATE_LISTEN = 2, /* In pure listen state */
+ P2P_STATE_SCAN = 3, /* In scan phase */
+ /* In the listen state of find phase */
+ P2P_STATE_FIND_PHASE_LISTEN = 4,
+ /* In the search state of find phase */
+ P2P_STATE_FIND_PHASE_SEARCH = 5,
+ /* In P2P provisioning discovery */
+ P2P_STATE_TX_PROVISION_DIS_REQ = 6,
+ P2P_STATE_RX_PROVISION_DIS_RSP = 7,
+ P2P_STATE_RX_PROVISION_DIS_REQ = 8,
+ /* Doing the group owner negoitation handshake */
+ P2P_STATE_GONEGO_ING = 9,
+ /* finish the group negoitation handshake with success */
+ P2P_STATE_GONEGO_OK = 10,
+ /* finish the group negoitation handshake with failure */
+ P2P_STATE_GONEGO_FAIL = 11,
+ /* receiving the P2P Inviation request and match with the profile. */
+ P2P_STATE_RECV_INVITE_REQ_MATCH = 12,
+ /* Doing the P2P WPS */
+ P2P_STATE_PROVISIONING_ING = 13,
+ /* Finish the P2P WPS */
+ P2P_STATE_PROVISIONING_DONE = 14,
+ /* Transmit the P2P Invitation request */
+ P2P_STATE_TX_INVITE_REQ = 15,
+ /* Receiving the P2P Invitation response */
+ P2P_STATE_RX_INVITE_RESP_OK = 16,
+ /* receiving the P2P Inviation request and dismatch with the profile. */
+ P2P_STATE_RECV_INVITE_REQ_DISMATCH = 17,
+ /* receiving the P2P Inviation request and this wifi is GO. */
+ P2P_STATE_RECV_INVITE_REQ_GO = 18,
+ /* receiving the P2P Inviation request to join an existing P2P Group. */
+ P2P_STATE_RECV_INVITE_REQ_JOIN = 19,
+ /* recveing the P2P Inviation response with failure */
+ P2P_STATE_RX_INVITE_RESP_FAIL = 20,
+ /* receiving p2p negoitation response with information is not available */
+ P2P_STATE_RX_INFOR_NOREADY = 21,
+ /* sending p2p negoitation response with information is not available */
+ P2P_STATE_TX_INFOR_NOREADY = 22,
+};
+
+enum P2P_WPSINFO {
+ P2P_NO_WPSINFO = 0,
+ P2P_GOT_WPSINFO_PEER_DISPLAY_PIN = 1,
+ P2P_GOT_WPSINFO_SELF_DISPLAY_PIN = 2,
+ P2P_GOT_WPSINFO_PBC = 3,
+};
+
+#define P2P_PRIVATE_IOCTL_SET_LEN 64
+
+enum P2P_PROTO_WK_ID {
+ P2P_FIND_PHASE_WK = 0,
+ P2P_RESTORE_STATE_WK = 1,
+ P2P_PRE_TX_PROVDISC_PROCESS_WK = 2,
+ P2P_PRE_TX_NEGOREQ_PROCESS_WK = 3,
+ P2P_PRE_TX_INVITEREQ_PROCESS_WK = 4,
+ P2P_AP_P2P_CH_SWITCH_PROCESS_WK =5,
+ P2P_RO_CH_WK = 6,
+};
+
+enum P2P_PS_STATE {
+ P2P_PS_DISABLE = 0,
+ P2P_PS_ENABLE = 1,
+ P2P_PS_SCAN = 2,
+ P2P_PS_SCAN_DONE = 3,
+ P2P_PS_ALLSTASLEEP = 4, /* for P2P GO */
+};
+
+enum P2P_PS_MODE {
+ P2P_PS_NONE = 0,
+ P2P_PS_CTWINDOW = 1,
+ P2P_PS_NOA = 2,
+ P2P_PS_MIX = 3, /* CTWindow and NoA */
+};
+
+/* =====================WFD Section===================== */
+/* For Wi-Fi Display */
+#define WFD_ATTR_DEVICE_INFO 0x00
+#define WFD_ATTR_ASSOC_BSSID 0x01
+#define WFD_ATTR_COUPLED_SINK_INFO 0x06
+#define WFD_ATTR_LOCAL_IP_ADDR 0x08
+#define WFD_ATTR_SESSION_INFO 0x09
+#define WFD_ATTR_ALTER_MAC 0x0a
+
+/* For WFD Device Information Attribute */
+#define WFD_DEVINFO_SOURCE 0x0000
+#define WFD_DEVINFO_PSINK 0x0001
+#define WFD_DEVINFO_SSINK 0x0002
+#define WFD_DEVINFO_DUAL 0x0003
+
+#define WFD_DEVINFO_SESSION_AVAIL 0x0010
+#define WFD_DEVINFO_WSD 0x0040
+#define WFD_DEVINFO_PC_TDLS 0x0080
+#define WFD_DEVINFO_HDCP_SUPPORT 0x0100
+
+#define IP_MCAST_MAC(mac) \
+ ((mac[0] == 0x01) && (mac[1] == 0x00) && (mac[2] == 0x5e))
+#define ICMPV6_MCAST_MAC(mac) \
+ ((mac[0] == 0x33) && (mac[1] == 0x33) && (mac[2] != 0xff))
+
+#endif /* _WIFI_H_ */
diff --git a/drivers/staging/r8188eu/include/wlan_bssdef.h b/drivers/staging/r8188eu/include/wlan_bssdef.h
new file mode 100644
index 000000000000..eae8bac175b2
--- /dev/null
+++ b/drivers/staging/r8188eu/include/wlan_bssdef.h
@@ -0,0 +1,343 @@
+/******************************************************************************
+ *
+ * Copyright(c) 2007 - 2011 Realtek Corporation. All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of version 2 of the GNU General Public License as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
+ * more details.
+ *
+ * You should have received a copy of the GNU General Public License along with
+ * this program; if not, write to the Free Software Foundation, Inc.,
+ * 51 Franklin Street, Fifth Floor, Boston, MA 02110, USA
+ *
+ *
+ ******************************************************************************/
+#ifndef __WLAN_BSSDEF_H__
+#define __WLAN_BSSDEF_H__
+
+#define MAX_IE_SZ 768
+
+#define NDIS_802_11_LENGTH_SSID 32
+#define NDIS_802_11_LENGTH_RATES 8
+#define NDIS_802_11_LENGTH_RATES_EX 16
+
+#define NDIS_802_11_RSSI long /* in dBm */
+
+struct ndis_802_11_ssid {
+ u32 SsidLength;
+ u8 Ssid[32];
+};
+
+enum NDIS_802_11_NETWORK_TYPE {
+ Ndis802_11FH,
+ Ndis802_11DS,
+ Ndis802_11OFDM5,
+ Ndis802_11OFDM24,
+ Ndis802_11NetworkTypeMax /* dummy upper bound */
+};
+
+struct ndis_802_11_config_fh {
+ u32 Length; /* Length of structure */
+ u32 HopPattern; /* As defined by 802.11, MSB set */
+ u32 HopSet; /* to one if non-802.11 */
+ u32 DwellTime; /* units are Kusec */
+};
+
+/*
+ * FW will only save the channel number in DSConfig.
+ * ODI Handler will convert the channel number to freq. number.
+ */
+struct ndis_802_11_config {
+ u32 Length; /* Length of structure */
+ u32 BeaconPeriod; /* units are Kusec */
+ u32 ATIMWindow; /* units are Kusec */
+ u32 DSConfig; /* Frequency, units are kHz */
+ struct ndis_802_11_config_fh FHConfig;
+};
+
+enum ndis_802_11_network_infra {
+ Ndis802_11IBSS,
+ Ndis802_11Infrastructure,
+ Ndis802_11AutoUnknown,
+ Ndis802_11InfrastructureMax, /* dummy upper bound */
+ Ndis802_11APMode
+};
+
+struct ndis_802_11_fixed_ie {
+ u8 Timestamp[8];
+ u16 BeaconInterval;
+ u16 Capabilities;
+};
+
+struct ndis_802_11_var_ie {
+ u8 ElementID;
+ u8 Length;
+ u8 data[1];
+};
+
+/*
+ * Length is the 4 bytes multiples of the sume of
+ * [ETH_ALEN] + 2 + sizeof (struct ndis_802_11_ssid) + sizeof (u32)
+ * + sizeof (NDIS_802_11_RSSI) + sizeof (enum NDIS_802_11_NETWORK_TYPE)
+ * + sizeof (struct ndis_802_11_config)
+ * + NDIS_802_11_LENGTH_RATES_EX + IELength
+ *
+ * Except the IELength, all other fields are fixed length.
+ * Therefore, we can define a macro to represent the partial sum. */
+
+enum ndis_802_11_auth_mode {
+ Ndis802_11AuthModeOpen,
+ Ndis802_11AuthModeShared,
+ Ndis802_11AuthModeAutoSwitch,
+ Ndis802_11AuthModeWPA,
+ Ndis802_11AuthModeWPAPSK,
+ Ndis802_11AuthModeWPANone,
+ Ndis802_11AuthModeWAPI,
+ Ndis802_11AuthModeMax /* Not a real mode, upper bound */
+};
+
+enum ndis_802_11_wep_status {
+ Ndis802_11WEPEnabled,
+ Ndis802_11Encryption1Enabled = Ndis802_11WEPEnabled,
+ Ndis802_11WEPDisabled,
+ Ndis802_11EncryptionDisabled = Ndis802_11WEPDisabled,
+ Ndis802_11WEPKeyAbsent,
+ Ndis802_11Encryption1KeyAbsent = Ndis802_11WEPKeyAbsent,
+ Ndis802_11WEPNotSupported,
+ Ndis802_11EncryptionNotSupported = Ndis802_11WEPNotSupported,
+ Ndis802_11Encryption2Enabled,
+ Ndis802_11Encryption2KeyAbsent,
+ Ndis802_11Encryption3Enabled,
+ Ndis802_11Encryption3KeyAbsent,
+ Ndis802_11_EncryptionWAPI
+};
+
+#define NDIS_802_11_AI_REQFI_CAPABILITIES 1
+#define NDIS_802_11_AI_REQFI_LISTENINTERVAL 2
+#define NDIS_802_11_AI_REQFI_CURRENTAPADDRESS 4
+
+#define NDIS_802_11_AI_RESFI_CAPABILITIES 1
+#define NDIS_802_11_AI_RESFI_STATUSCODE 2
+#define NDIS_802_11_AI_RESFI_ASSOCIATIONID 4
+
+struct ndis_802_11_ai_reqfi {
+ u16 Capabilities;
+ u16 ListenInterval;
+ unsigned char CurrentAPAddress[ETH_ALEN];
+};
+
+struct ndis_802_11_ai_resfi {
+ u16 Capabilities;
+ u16 StatusCode;
+ u16 AssociationId;
+};
+
+struct ndis_802_11_assoc_info {
+ u32 Length;
+ u16 AvailableRequestFixedIEs;
+ struct ndis_802_11_ai_reqfi RequestFixedIEs;
+ u32 RequestIELength;
+ u32 OffsetRequestIEs;
+ u16 AvailableResponseFixedIEs;
+ struct ndis_802_11_ai_resfi ResponseFixedIEs;
+ u32 ResponseIELength;
+ u32 OffsetResponseIEs;
+};
+
+enum ndis_802_11_reload_def {
+ Ndis802_11ReloadWEPKeys
+};
+
+/* Key mapping keys require a BSSID */
+struct ndis_802_11_key {
+ u32 Length; /* Length of this structure */
+ u32 KeyIndex;
+ u32 KeyLength; /* length of key in bytes */
+ unsigned char BSSID[ETH_ALEN];
+ unsigned long long KeyRSC;
+ u8 KeyMaterial[32]; /* var len depending on above field */
+};
+
+struct ndis_802_11_remove_key {
+ u32 Length; /* Length */
+ u32 KeyIndex;
+ unsigned char BSSID[ETH_ALEN];
+};
+
+struct ndis_802_11_wep {
+ u32 Length; /* Length of this structure */
+ u32 KeyIndex; /* 0 is the per-client key,
+ * 1-N are the global keys */
+ u32 KeyLength; /* length of key in bytes */
+ u8 KeyMaterial[16];/* variable len depending on above field */
+};
+
+struct ndis_802_11_auth_req {
+ u32 Length; /* Length of structure */
+ unsigned char Bssid[ETH_ALEN];
+ u32 Flags;
+};
+
+enum ndis_802_11_status_type {
+ Ndis802_11StatusType_Authentication,
+ Ndis802_11StatusType_MediaStreamMode,
+ Ndis802_11StatusType_PMKID_CandidateList,
+ Ndis802_11StatusTypeMax /* not a real type, defined as
+ * an upper bound */
+};
+
+struct ndis_802_11_status_ind {
+ enum ndis_802_11_status_type StatusType;
+};
+
+/* mask for authentication/integrity fields */
+#define NDIS_802_11_AUTH_REQUEST_AUTH_FIELDS 0x0f
+#define NDIS_802_11_AUTH_REQUEST_REAUTH 0x01
+#define NDIS_802_11_AUTH_REQUEST_KEYUPDATE 0x02
+#define NDIS_802_11_AUTH_REQUEST_PAIRWISE_ERROR 0x06
+#define NDIS_802_11_AUTH_REQUEST_GROUP_ERROR 0x0E
+
+/* MIC check time, 60 seconds. */
+#define MIC_CHECK_TIME 60000000
+
+struct ndis_802_11_auth_evt {
+ struct ndis_802_11_status_ind Status;
+ struct ndis_802_11_auth_req Request[1];
+};
+
+struct ndis_802_11_test {
+ u32 Length;
+ u32 Type;
+ union {
+ struct ndis_802_11_auth_evt AuthenticationEvent;
+ NDIS_802_11_RSSI RssiTrigger;
+ } tt;
+};
+
+#ifndef Ndis802_11APMode
+#define Ndis802_11APMode (Ndis802_11InfrastructureMax+1)
+#endif
+
+struct wlan_phy_info {
+ u8 SignalStrength;/* in percentage) */
+ u8 SignalQuality;/* in percentage) */
+ u8 Optimum_antenna; /* for Antenna diversity */
+ u8 Reserved_0;
+};
+
+struct wlan_bcn_info {
+ /* these infor get from rtw_get_encrypt_info when
+ * * translate scan to UI */
+ u8 encryp_protocol;/* ENCRYP_PROTOCOL_E: OPEN/WEP/WPA/WPA2/WAPI */
+ int group_cipher; /* WPA/WPA2 group cipher */
+ int pairwise_cipher;/* WPA/WPA2/WEP pairwise cipher */
+ int is_8021x;
+
+ /* bwmode 20/40 and ch_offset UP/LOW */
+ unsigned short ht_cap_info;
+ unsigned char ht_info_infos_0;
+};
+
+/* temporally add #pragma pack for structure alignment issue of
+* struct wlan_bssid_ex and get_struct wlan_bssid_ex_sz()
+*/
+struct wlan_bssid_ex {
+ u32 Length;
+ unsigned char MacAddress[ETH_ALEN];
+ u8 Reserved[2];/* 0]: IS beacon frame */
+ struct ndis_802_11_ssid Ssid;
+ u32 Privacy;
+ NDIS_802_11_RSSI Rssi;/* in dBM,raw data ,get from PHY) */
+ enum NDIS_802_11_NETWORK_TYPE NetworkTypeInUse;
+ struct ndis_802_11_config Configuration;
+ enum ndis_802_11_network_infra InfrastructureMode;
+ unsigned char SupportedRates[NDIS_802_11_LENGTH_RATES_EX];
+ struct wlan_phy_info PhyInfo;
+ u32 IELength;
+ u8 IEs[MAX_IE_SZ]; /* timestamp, beacon interval, and
+ * capability information) */
+} __packed;
+
+static inline uint get_wlan_bssid_ex_sz(struct wlan_bssid_ex *bss)
+{
+ return sizeof(struct wlan_bssid_ex) - MAX_IE_SZ + bss->IELength;
+}
+
+struct wlan_network {
+ struct list_head list;
+ int network_type; /* refer to ieee80211.h for WIRELESS_11A/B/G */
+ int fixed; /* set fixed when not to be removed
+ * in site-surveying */
+ unsigned long last_scanned; /* timestamp for the network */
+ int aid; /* will only be valid when a BSS is joinned. */
+ int join_res;
+ struct wlan_bssid_ex network; /* must be the last item */
+ struct wlan_bcn_info BcnInfo;
+};
+
+enum VRTL_CARRIER_SENSE {
+ DISABLE_VCS,
+ ENABLE_VCS,
+ AUTO_VCS
+};
+
+enum VCS_TYPE {
+ NONE_VCS,
+ RTS_CTS,
+ CTS_TO_SELF
+};
+
+#define PWR_CAM 0
+#define PWR_MINPS 1
+#define PWR_MAXPS 2
+#define PWR_UAPSD 3
+#define PWR_VOIP 4
+
+enum UAPSD_MAX_SP {
+ NO_LIMIT,
+ TWO_MSDU,
+ FOUR_MSDU,
+ SIX_MSDU
+};
+
+#define NUM_PRE_AUTH_KEY 16
+#define NUM_PMKID_CACHE NUM_PRE_AUTH_KEY
+
+/*
+* WPA2
+*/
+
+struct pmkid_candidate {
+ unsigned char BSSID[ETH_ALEN];
+ u32 Flags;
+};
+
+struct ndis_802_11_pmkid_list {
+ u32 Version; /* Version of the structure */
+ u32 NumCandidates; /* No. of pmkid candidates */
+ struct pmkid_candidate CandidateList[1];
+};
+
+struct ndis_802_11_auth_encrypt {
+ enum ndis_802_11_auth_mode AuthModeSupported;
+ enum ndis_802_11_wep_status EncryptStatusSupported;
+};
+
+struct ndis_802_11_cap {
+ u32 Length;
+ u32 Version;
+ u32 NoOfPMKIDs;
+ u32 NoOfAuthEncryptPairsSupported;
+ struct ndis_802_11_auth_encrypt AuthenticationEncryptionSupported[1];
+};
+
+u8 key_2char2num(u8 hch, u8 lch);
+u8 key_char2num(u8 ch);
+u8 str_2char2num(u8 hch, u8 lch);
+
+#endif /* ifndef WLAN_BSSDEF_H_ */
diff --git a/drivers/staging/r8188eu/include/xmit_osdep.h b/drivers/staging/r8188eu/include/xmit_osdep.h
new file mode 100644
index 000000000000..2ff622ba24f0
--- /dev/null
+++ b/drivers/staging/r8188eu/include/xmit_osdep.h
@@ -0,0 +1,67 @@
+/******************************************************************************
+ *
+ * Copyright(c) 2007 - 2011 Realtek Corporation. All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of version 2 of the GNU General Public License as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
+ * more details.
+ *
+ * You should have received a copy of the GNU General Public License along with
+ * this program; if not, write to the Free Software Foundation, Inc.,
+ * 51 Franklin Street, Fifth Floor, Boston, MA 02110, USA
+ *
+ *
+ ******************************************************************************/
+#ifndef __XMIT_OSDEP_H_
+#define __XMIT_OSDEP_H_
+
+#include <osdep_service.h>
+#include <drv_types.h>
+
+struct pkt_file {
+ struct sk_buff *pkt;
+ size_t pkt_len; /* the remainder length of the open_file */
+ unsigned char *cur_buffer;
+ u8 *buf_start;
+ u8 *cur_addr;
+ size_t buf_len;
+};
+
+extern int rtw_ht_enable;
+extern int rtw_cbw40_enable;
+extern int rtw_ampdu_enable;/* for enable tx_ampdu */
+
+#define NR_XMITFRAME 256
+
+struct xmit_priv;
+struct pkt_attrib;
+struct sta_xmit_priv;
+struct xmit_frame;
+struct xmit_buf;
+
+int rtw_xmit_entry(struct sk_buff *pkt, struct net_device *pnetdev);
+
+void rtw_os_xmit_schedule(struct adapter *padapter);
+
+int rtw_os_xmit_resource_alloc(struct adapter *padapter,
+ struct xmit_buf *pxmitbuf, u32 alloc_sz);
+void rtw_os_xmit_resource_free(struct adapter *padapter,
+ struct xmit_buf *pxmitbuf, u32 free_sz);
+
+void rtw_set_tx_chksum_offload(struct sk_buff *pkt, struct pkt_attrib *pattrib);
+
+uint rtw_remainder_len(struct pkt_file *pfile);
+void _rtw_open_pktfile(struct sk_buff *pkt, struct pkt_file *pfile);
+uint _rtw_pktfile_read(struct pkt_file *pfile, u8 *rmem, uint rlen);
+int rtw_endofpktfile(struct pkt_file *pfile);
+
+void rtw_os_pkt_complete(struct adapter *padapter, struct sk_buff *pkt);
+void rtw_os_xmit_complete(struct adapter *padapter,
+ struct xmit_frame *pxframe);
+
+#endif /* __XMIT_OSDEP_H_ */
--
2.31.1
Powered by blists - more mailing lists