[<prev] [next>] [<thread-prev] [day] [month] [year] [list]
Message-ID: <85a473cb-e688-f457-1320-390619f07033@microchip.com>
Date: Tue, 27 Jul 2021 10:48:52 +0200
From: Nicolas Ferre <nicolas.ferre@...rochip.com>
To: Eugen Hristev <eugen.hristev@...rochip.com>, <robh+dt@...nel.org>
CC: <alexandre.belloni@...tlin.com>, <devicetree@...r.kernel.org>,
<linux-arm-kernel@...ts.infradead.org>,
<linux-kernel@...r.kernel.org>, <ludovic.desroches@...rochip.com>
Subject: Re: [PATCH] ARM: dts: at91: sama5d27_som1_ek: enable ADC node
On 22/06/2021 at 12:17, Eugen Hristev wrote:
> Enable the ADC for AN pins on Mikrobus1 and Mikrobus2 on the board.
> These correspond to channels AD6 and AD7 in the controller.
>
> # cat /sys/bus/iio/devices/iio\:device0/in_voltage6_raw
> 240
> # cat /sys/bus/iio/devices/iio\:device0/in_voltage7_raw
> 16380
>
> Signed-off-by: Eugen Hristev <eugen.hristev@...rochip.com>
Acked-by: Nicolas Ferre <nicolas.ferre@...rochip.com>
Queued on at91-dt for 5.15. Best regards,
Nicolas
> ---
> arch/arm/boot/dts/at91-sama5d27_som1_ek.dts | 4 +++-
> 1 file changed, 3 insertions(+), 1 deletion(-)
>
> diff --git a/arch/arm/boot/dts/at91-sama5d27_som1_ek.dts b/arch/arm/boot/dts/at91-sama5d27_som1_ek.dts
> index a9e6fee55a2a..261a7dbcfdee 100644
> --- a/arch/arm/boot/dts/at91-sama5d27_som1_ek.dts
> +++ b/arch/arm/boot/dts/at91-sama5d27_som1_ek.dts
> @@ -224,8 +224,10 @@ i2c1: i2c@...28000 {
> adc: adc@...30000 {
> vddana-supply = <&vddana>;
> vref-supply = <&advref>;
> + pinctrl-names = "default";
> + pinctrl-0 = <&pinctrl_mikrobus1_an &pinctrl_mikrobus2_an>;
>
> - status = "disabled";
> + status = "okay";
> };
>
> pinctrl@...38000 {
>
--
Nicolas Ferre
Powered by blists - more mailing lists