Message-ID: <CAMty3ZD5rpYHtW-Rs4i=XvBmiVEaeWNu1j=QE3mFJTjSPJTpxQ@mail.gmail.com>
Date:   Tue, 27 Jul 2021 15:12:09 +0530
From:   Jagan Teki <jagan@...rulasolutions.com>
To:     Maxime Ripard <maxime@...no.tech>
Cc:     Robert Foss <robert.foss@...aro.org>,
        Andrzej Hajda <a.hajda@...sung.com>,
        Daniel Vetter <daniel.vetter@...el.com>,
        David Airlie <airlied@...ux.ie>,
        Sam Ravnborg <sam@...nborg.org>,
        Maarten Lankhorst <maarten.lankhorst@...ux.intel.com>,
        Thomas Zimmermann <tzimmermann@...e.de>,
        Neil Armstrong <narmstrong@...libre.com>,
        Jonas Karlman <jonas@...boo.se>,
        Jernej Skrabec <jernej.skrabec@...il.com>,
        Thierry Reding <thierry.reding@...il.com>,
        Laurent Pinchart <Laurent.pinchart@...asonboard.com>,
        linux-kernel <linux-kernel@...r.kernel.org>,
        dri-devel <dri-devel@...ts.freedesktop.org>
Subject: Re: [PATCH 04/10] drm/bridge: Document the probe issue with MIPI-DSI bridges

On Tue, Jul 20, 2021 at 7:15 PM Maxime Ripard <maxime@...no.tech> wrote:
>
> Interactions between bridges, panels, MIPI-DSI host and the component
> framework are not trivial and can lead to probing issues when
> implementing a display driver. Let's document the various cases we need
> too consider, and the solution to support all the cases.
>
> Signed-off-by: Maxime Ripard <maxime@...no.tech>
> ---
>  Documentation/gpu/drm-kms-helpers.rst |  6 +++
>  drivers/gpu/drm/drm_bridge.c          | 60 +++++++++++++++++++++++++++
>  2 files changed, 66 insertions(+)
>
> diff --git a/Documentation/gpu/drm-kms-helpers.rst b/Documentation/gpu/drm-kms-helpers.rst
> index 10f8df7aecc0..ec2f65b31930 100644
> --- a/Documentation/gpu/drm-kms-helpers.rst
> +++ b/Documentation/gpu/drm-kms-helpers.rst
> @@ -157,6 +157,12 @@ Display Driver Integration
>  .. kernel-doc:: drivers/gpu/drm/drm_bridge.c
>     :doc: display driver integration
>
> +Special Care with MIPI-DSI bridges
> +----------------------------------
> +
> +.. kernel-doc:: drivers/gpu/drm/drm_bridge.c
> +   :doc: special care dsi
> +
>  Bridge Operations
>  -----------------
>
> diff --git a/drivers/gpu/drm/drm_bridge.c b/drivers/gpu/drm/drm_bridge.c
> index c9a950bfdfe5..81f8dac12367 100644
> --- a/drivers/gpu/drm/drm_bridge.c
> +++ b/drivers/gpu/drm/drm_bridge.c
> @@ -95,6 +95,66 @@
>   * documentation of bridge operations for more details).
>   */
>
> +/**
> + * DOC: special care dsi
> + *
> + * The interaction between the bridges and other frameworks involved in
> + * the probing of the display driver and the bridge driver can be
> + * challenging. Indeed, there's multiple cases that needs to be
> + * considered:
> + *
> + * - The display driver doesn't use the component framework and isn't a
> + *   MIPI-DSI host. In this case, the bridge driver will probe at some
> + *   point and the display driver should try to probe again by returning
> + *   EPROBE_DEFER as long as the bridge driver hasn't probed.
> + *
> + * - The display driver doesn't use the component framework, but is a
> + *   MIPI-DSI host. The bridge device uses the MIPI-DCS commands to be
> + *   controlled. In this case, the bridge device is a child of the
> + *   display device and when it will probe it's assured that the display
> + *   device (and MIPI-DSI host) is present. The display driver will be
> + *   assured that the bridge driver is connected between the
> + *   &mipi_dsi_host_ops.attach and &mipi_dsi_host_ops.detach operations.
> + *   Therefore, it must run mipi_dsi_host_register() in its probe
> + *   function, and then run drm_bridge_attach() in its
> + *   &mipi_dsi_host_ops.attach hook.
> + *
> + * - The display driver uses the component framework and is a MIPI-DSI
> + *   host. The bridge device uses the MIPI-DCS commands to be
> + *   controlled. This is the same situation than above, and can run
> + *   mipi_dsi_host_register() in either its probe or bind hooks.
> + *
> + * - The display driver uses the component framework and is a MIPI-DSI
> + *   host. The bridge device uses a separate bus (such as I2C) to be
> + *   controlled. In this case, there's no correlation between the probe
> + *   of the bridge and display drivers, so care must be taken to avoid
> + *   an endless EPROBE_DEFER loop, with each driver waiting for the
> + *   other to probe.
> + *
> + * The ideal pattern to cover the last item (and all the others in the
> + * display driver case) is to split the operations like this:
> + *
> + * - In the display driver must run mipi_dsi_host_register() and
> + *   component_add in its probe hook. It will make sure that the
> + *   MIPI-DSI host sticks around, and that the driver's bind can be
> + *   called.
> + *
> + * - In its probe hook, the bridge driver must not try to find its
> + *   MIPI-DSI host or register as a MIPI-DSI device. As far as the
> + *   framework is concerned, it must only call drm_bridge_add().
> + *
> + * - In its bind hook, the display driver must try to find the bridge
> + *   and return -EPROBE_DEFER if it doesn't find it. If it's there, it
> + *   must call drm_bridge_attach(). The MIPI-DSI host is now functional.

There is an another problem occur for this scenario in the case of kms
hotplug driver, sun6i_mipi_dsi.c. When host attach wait till drm
device pointer found and drm device pointer would found only when bind
done, and bind would complete only when &drm_bridge_funcs.attach hooks
are complete. But, If DSI driver is fully bridge driven then this
attach in bind will trigger panel_bridge hook attach and at this point
we cannot get panel_bridge at all which indeed second attach would
would failed.

This is one of the reason I'm trying to use drm_bridge_attach host
attach itself instead of component bind, not yet succeeded.

Thanks,
Jagan.

Powered by blists - more mailing lists