Message-Id: <20210728091245.231043-1-martin.kepplinger@puri.sm>
Date:   Wed, 28 Jul 2021 11:12:42 +0200
From:   Martin Kepplinger <martin.kepplinger@...i.sm>
To:     laurent.pinchart@...asonboard.com, dafna.hirschfeld@...labora.com,
        shawnguo@...nel.org
Cc:     devicetree@...r.kernel.org, festevam@...il.com,
        kernel@...gutronix.de, kernel@...i.sm, krzk@...nel.org,
        linux-arm-kernel@...ts.infradead.org, linux-imx@....com,
        linux-kernel@...r.kernel.org, linux-media@...r.kernel.org,
        linux-staging@...ts.linux.dev, m.felsch@...gutronix.de,
        mchehab@...nel.org, phone-devel@...r.kernel.org, robh@...nel.org,
        slongerbeam@...il.com,
        Martin Kepplinger <martin.kepplinger@...i.sm>
Subject: [PATCH v10 0/3] media: imx: add support for imx8mq MIPI RX

hi,

This patch series adds a driver for the i.MX8MQ CSI MIPI receiver / controller.

It includes the driver, the dt-bindings and the DT addition to the SoC dtsi.
I test it using libcamera. Thanks to Laurent who helped a lot. I'm happy for
any feedback,

                           martin

revision history
----------------
v10: (thank you Dafna)
* improve send_level documentation.
* add some comments to 0x180 and 0x184
* after re-reading I could eliminate the unneeded setting of 0x184 (ignored
  by setting 0x180 to 1).

v9: (thank you Laurent)
* improve getting the esc clock rate for hs_settle
https://lore.kernel.org/linux-media/20210726082117.2423597-1-martin.kepplinger@puri.sm/

v8: (thank you Laurent)
* calculate hs_settle for any clk rate and mode
* add reviewed-by tag
https://lore.kernel.org/linux-media/20210723101217.1954805-1-martin.kepplinger@puri.sm/T/

v7: (thank you Laurent and Rob)
* fix the binding example (include the reset driver)
* use pm_runtime_resume_and_get()
* fix some logic in init_cfg()
* add some useful code comments and fix minor bits found by Laurent in v6
https://lore.kernel.org/linux-media/20210716102244.581182-1-martin.kepplinger@puri.sm/T/#t

v6: (thank you Laurent and Rob)
* add reviewed-by tag to binding
* statically allocate clk_bulk_data
* fix how the hs_settle value is applied
* remove s_power calls
* remove the link_setup() callback implementation and make the link immutable
* more cleanups according to Laurents' review from v5
https://lore.kernel.org/linux-media/20210714111931.324485-1-martin.kepplinger@puri.sm/

v5: (thank you Laurent)
* fix reset usage by using the already supported reset controller driver
* remove clko2 (totally unrelated clock / had been included by accident)
* rename pxl clock to ui
https://lore.kernel.org/linux-media/20210618095753.114557-1-martin.kepplinger@puri.sm/

v4: (thank you Rob and Marco)
* create fsl,mipi-phy-gpr custom dt property instead of confusing "phy"
* add imx8mq-specific compatibile to imx8mq.dtsi for future use
https://lore.kernel.org/linux-media/20210614121522.2944593-1-martin.kepplinger@puri.sm/

v3: (thank you, Rob and Laurent)
among minor other things according to v2 review, changes include:
* better describe the clocks
* rename DT property "phy-reset" to "reset" and "phy-gpr" to "phy"
https://lore.kernel.org/linux-media/20210608104128.1616028-1-martin.kepplinger@puri.sm/T/#t

v2: (thank you, Dan and Guido)
among fixes according to v1 reviews, changes include:
* remove status property from dt-bindings example
* define a few bits in order to have less magic values
* use "imx8mq_mipi_csi_" as local function prefix
* read DT properties only during probe()
* remove dead code (log_status)
* add imx8mq_mipi_csi_release_icc()
* fix imx8mq_mipi_csi_init_icc()
https://lore.kernel.org/linux-media/20210531112326.90094-1-martin.kepplinger@puri.sm/

v1:
https://lore.kernel.org/linux-media/20210527075407.3180744-1-martin.kepplinger@puri.sm/T/#t


Martin Kepplinger (3):
  dt-bindings: media: document the nxp,imx8mq-mipi-csi2 receiver phy and
    controller
  media: imx: add a driver for i.MX8MQ mipi csi rx phy and controller
  arm64: dts: imx8mq: add mipi csi phy and csi bridge descriptions

 .../bindings/media/nxp,imx8mq-mipi-csi2.yaml  | 174 +++
 arch/arm64/boot/dts/freescale/imx8mq.dtsi     | 104 ++
 drivers/staging/media/imx/Makefile            |   1 +
 drivers/staging/media/imx/imx8mq-mipi-csi2.c  | 991 ++++++++++++++++++
 4 files changed, 1270 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/media/nxp,imx8mq-mipi-csi2.yaml
 create mode 100644 drivers/staging/media/imx/imx8mq-mipi-csi2.c

-- 
2.30.2

Powered by blists - more mailing lists