| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <7f36b8b7-b770-6c29-b69f-f0e8ca06ff7d@roeck-us.net>
Date: Thu, 29 Jul 2021 23:31:18 -0700
From: Guenter Roeck <linux@...ck-us.net>
To: Kyle Tso <kyletso@...gle.com>, heikki.krogerus@...ux.intel.com,
gregkh@...uxfoundation.org, robh+dt@...nel.org
Cc: badhri@...gle.com, linux-usb@...r.kernel.org,
linux-kernel@...r.kernel.org, devicetree@...r.kernel.org
Subject: Re: [PATCH v4 2/2] usb: typec: tcpm: Support non-PD mode
On 7/29/21 11:18 PM, Kyle Tso wrote:
> Even if the Type-C controller supports PD, it is doable to disable PD
> capabilities with the current state machine in TCPM. Without enabling RX
> in low-level drivers and with skipping the power negotiation, the port
> is eligible to be a non-PD Type-C port. Use new flags whose values are
> populated from the device tree to decide the port PD capability. Adding
> "pd-unsupported" property in device tree indicates that the port does
> not support PD. If PD is not supported, the device tree property
> "typec-power-opmode" shall be added to specify the advertised Rp value
> if the port supports SRC role.
>
> Signed-off-by: Kyle Tso <kyletso@...gle.com>
Reviewed-by: Guenter Roeck <linux@...ck-us.net>
> ---
> changes since v3:
> - commit msg updated
> - removed unnecessary empty lines
> - re-factored the code of reading device tree properties and the error
> handling
> - removed unnecessay variable initialization
> - modified the comments
>
> drivers/usb/typec/tcpm/tcpm.c | 87 +++++++++++++++++++++++++++--------
> 1 file changed, 68 insertions(+), 19 deletions(-)
>
> diff --git a/drivers/usb/typec/tcpm/tcpm.c b/drivers/usb/typec/tcpm/tcpm.c
> index 5b22a1c931a9..faea1bf9dce0 100644
> --- a/drivers/usb/typec/tcpm/tcpm.c
> +++ b/drivers/usb/typec/tcpm/tcpm.c
> @@ -316,6 +316,7 @@ struct tcpm_port {
> struct typec_partner *partner;
>
> enum typec_cc_status cc_req;
> + enum typec_cc_status src_rp; /* work only if pd_supported == false */
>
> enum typec_cc_status cc1;
> enum typec_cc_status cc2;
> @@ -323,6 +324,7 @@ struct tcpm_port {
>
> bool attached;
> bool connected;
> + bool pd_supported;
> enum typec_port_type port_type;
>
> /*
> @@ -815,6 +817,9 @@ static enum typec_cc_status tcpm_rp_cc(struct tcpm_port *port)
> int nr_pdo = port->nr_src_pdo;
> int i;
>
> + if (!port->pd_supported)
> + return port->src_rp;
> +
> /*
> * Search for first entry with matching voltage.
> * It should report the maximum supported current.
> @@ -3568,9 +3573,11 @@ static int tcpm_src_attach(struct tcpm_port *port)
> if (ret < 0)
> return ret;
>
> - ret = port->tcpc->set_pd_rx(port->tcpc, true);
> - if (ret < 0)
> - goto out_disable_mux;
> + if (port->pd_supported) {
> + ret = port->tcpc->set_pd_rx(port->tcpc, true);
> + if (ret < 0)
> + goto out_disable_mux;
> + }
>
> /*
> * USB Type-C specification, version 1.2,
> @@ -3600,7 +3607,8 @@ static int tcpm_src_attach(struct tcpm_port *port)
> out_disable_vconn:
> tcpm_set_vconn(port, false);
> out_disable_pd:
> - port->tcpc->set_pd_rx(port->tcpc, false);
> + if (port->pd_supported)
> + port->tcpc->set_pd_rx(port->tcpc, false);
> out_disable_mux:
> tcpm_mux_set(port, TYPEC_STATE_SAFE, USB_ROLE_NONE,
> TYPEC_ORIENTATION_NONE);
> @@ -3804,6 +3812,20 @@ static enum typec_pwr_opmode tcpm_get_pwr_opmode(enum typec_cc_status cc)
> }
> }
>
> +static enum typec_cc_status tcpm_pwr_opmode_to_rp(enum typec_pwr_opmode opmode)
> +{
> + switch (opmode) {
> + case TYPEC_PWR_MODE_USB:
> + return TYPEC_CC_RP_DEF;
> + case TYPEC_PWR_MODE_1_5A:
> + return TYPEC_CC_RP_1_5;
> + case TYPEC_PWR_MODE_3_0A:
> + case TYPEC_PWR_MODE_PD:
> + default:
> + return TYPEC_CC_RP_3_0;
> + }
> +}
> +
> static void run_state_machine(struct tcpm_port *port)
> {
> int ret;
> @@ -3914,6 +3936,10 @@ static void run_state_machine(struct tcpm_port *port)
> if (port->ams == POWER_ROLE_SWAP ||
> port->ams == FAST_ROLE_SWAP)
> tcpm_ams_finish(port);
> + if (!port->pd_supported) {
> + tcpm_set_state(port, SRC_READY, 0);
> + break;
> + }
> port->upcoming_state = SRC_SEND_CAPABILITIES;
> tcpm_ams_start(port, POWER_NEGOTIATION);
> break;
> @@ -4161,7 +4187,10 @@ static void run_state_machine(struct tcpm_port *port)
> current_lim = PD_P_SNK_STDBY_MW / 5;
> tcpm_set_current_limit(port, current_lim, 5000);
> tcpm_set_charge(port, true);
> - tcpm_set_state(port, SNK_WAIT_CAPABILITIES, 0);
> + if (!port->pd_supported)
> + tcpm_set_state(port, SNK_READY, 0);
> + else
> + tcpm_set_state(port, SNK_WAIT_CAPABILITIES, 0);
> break;
> }
> /*
> @@ -4389,7 +4418,8 @@ static void run_state_machine(struct tcpm_port *port)
> tcpm_set_vbus(port, true);
> if (port->ams == HARD_RESET)
> tcpm_ams_finish(port);
> - port->tcpc->set_pd_rx(port->tcpc, true);
> + if (port->pd_supported)
> + port->tcpc->set_pd_rx(port->tcpc, true);
> tcpm_set_attached_state(port, true);
> tcpm_set_state(port, SRC_UNATTACHED, PD_T_PS_SOURCE_ON);
> break;
> @@ -5898,6 +5928,7 @@ EXPORT_SYMBOL_GPL(tcpm_tcpc_reset);
> static int tcpm_fw_get_caps(struct tcpm_port *port,
> struct fwnode_handle *fwnode)
> {
> + const char *opmode_str;
> const char *cap_str;
> int ret;
> u32 mw, frs_current;
> @@ -5932,22 +5963,37 @@ static int tcpm_fw_get_caps(struct tcpm_port *port,
> return ret;
> port->typec_caps.type = ret;
> port->port_type = port->typec_caps.type;
> + port->pd_supported = !fwnode_property_read_bool(fwnode, "pd-unsupported");
>
> port->slow_charger_loop = fwnode_property_read_bool(fwnode, "slow-charger-loop");
> if (port->port_type == TYPEC_PORT_SNK)
> goto sink;
>
> - /* Get source pdos */
> - ret = fwnode_property_count_u32(fwnode, "source-pdos");
> - if (ret <= 0)
> - return -EINVAL;
> + /* Get Source PDOs for the PD port or Source Rp value for the non-PD port */
> + if (port->pd_supported) {
> + ret = fwnode_property_count_u32(fwnode, "source-pdos");
> + if (ret == 0)
> + return -EINVAL;
> + else if (ret < 0)
> + return ret;
>
> - port->nr_src_pdo = min(ret, PDO_MAX_OBJECTS);
> - ret = fwnode_property_read_u32_array(fwnode, "source-pdos",
> - port->src_pdo, port->nr_src_pdo);
> - if ((ret < 0) || tcpm_validate_caps(port, port->src_pdo,
> - port->nr_src_pdo))
> - return -EINVAL;
> + port->nr_src_pdo = min(ret, PDO_MAX_OBJECTS);
> + ret = fwnode_property_read_u32_array(fwnode, "source-pdos",
> + port->src_pdo, port->nr_src_pdo);
> + if (ret)
> + return ret;
> + ret = tcpm_validate_caps(port, port->src_pdo, port->nr_src_pdo);
> + if (ret)
> + return ret;
> + } else {
> + ret = fwnode_property_read_string(fwnode, "typec-power-opmode", &opmode_str);
> + if (ret)
> + return ret;
> + ret = typec_find_pwr_opmode(opmode_str);
> + if (ret < 0)
> + return ret;
> + port->src_rp = tcpm_pwr_opmode_to_rp(ret);
> + }
>
> if (port->port_type == TYPEC_PORT_SRC)
> return 0;
> @@ -5961,6 +6007,11 @@ static int tcpm_fw_get_caps(struct tcpm_port *port,
> if (port->typec_caps.prefer_role < 0)
> return -EINVAL;
> sink:
> + port->self_powered = fwnode_property_read_bool(fwnode, "self-powered");
> +
> + if (!port->pd_supported)
> + return 0;
> +
> /* Get sink pdos */
> ret = fwnode_property_count_u32(fwnode, "sink-pdos");
> if (ret <= 0)
> @@ -5977,9 +6028,7 @@ static int tcpm_fw_get_caps(struct tcpm_port *port,
> return -EINVAL;
> port->operating_snk_mw = mw / 1000;
>
> - port->self_powered = fwnode_property_read_bool(fwnode, "self-powered");
> -
> - /* FRS can only be supported byb DRP ports */
> + /* FRS can only be supported by DRP ports */
> if (port->port_type == TYPEC_PORT_DRP) {
> ret = fwnode_property_read_u32(fwnode, "new-source-frs-typec-current",
> &frs_current);
>
Powered by blists - more mailing lists