[ 0.000000] printk: debug: ignoring loglevel setting. [ 0.000000] Total memory = 512MB; using 1024kB for hash table [ 0.000000] Activating Kernel Userspace Execution Prevention [ 0.000000] Activating Kernel Userspace Access Protection [ 0.000000] Linux version 5.12.0-pmac (johnson@ThinkPad) (powerpc-linux-gnu-gcc (Debian 8.3.0-2) 8.3.0, GNU ld (GNU Binutils for Debian) 2.31.1) #6 SMP Sat Jul 24 11:49:36 MDT 2021 [ 0.000000] ioremap() called early from probe_one_macio+0x130/0x268. Use early_ioremap() instead [ 0.000000] Found a Gatwick mac-io controller, rev: 1, mapped at 0x(ptrval) [ 0.000000] ioremap() called early from probe_one_macio+0x130/0x268. Use early_ioremap() instead [ 0.000000] Found a Heathrow mac-io controller, rev: 1, mapped at 0x(ptrval) [ 0.000000] PowerMac motherboard: PowerBook Wallstreet [ 0.000000] ioremap() called early from find_via_pmu+0x244/0x56c. Use early_ioremap() instead [ 0.000000] PMU driver v2 initialized for PowerBook G3 Series, firmware: 0a [ 0.000000] Using PowerMac machine description [ 0.000000] printk: bootconsole [udbg0] enabled [ 0.000000] CPU maps initialized for 1 thread per core [ 0.000000] (thread shift is 0) [ 0.000000] ----------------------------------------------------- [ 0.000000] phys_mem_size = 0x20000000 [ 0.000000] dcache_bsize = 0x20 [ 0.000000] icache_bsize = 0x20 [ 0.000000] cpu_features = 0x000000000501a008 [ 0.000000] possible = 0x00000000277de14a [ 0.000000] always = 0x0000000001000000 [ 0.000000] cpu_user_features = 0x8c000001 0x00000000 [ 0.000000] mmu_features = 0x00000001 [ 0.000000] Hash_size = 0x100000 [ 0.000000] Hash_mask = 0x3fff [ 0.000000] ----------------------------------------------------- [ 0.000000] ioremap() called early from pmac_setup_arch+0x10c/0x294. Use early_ioremap() instead [ 0.000000] nvram: OF partition at 0x1800 [ 0.000000] nvram: XP partition at 0x1300 [ 0.000000] nvram: NR partition at 0x1400 [ 0.000000] Top of RAM: 0x20000000, Total RAM: 0x20000000 [ 0.000000] Memory hole size: 0MB [ 0.000000] Zone ranges: [ 0.000000] DMA [mem 0x0000000000000000-0x000000001fffffff] [ 0.000000] Normal empty [ 0.000000] HighMem empty [ 0.000000] Movable zone start for each node [ 0.000000] Early memory node ranges [ 0.000000] node 0: [mem 0x0000000000000000-0x000000001fffffff] [ 0.000000] Initmem setup node 0 [mem 0x0000000000000000-0x000000001fffffff] [ 0.000000] On node 0 totalpages: 131072 [ 0.000000] DMA zone: 1024 pages used for memmap [ 0.000000] DMA zone: 0 pages reserved [ 0.000000] DMA zone: 131072 pages, LIFO batch:31 [ 0.000000] percpu: Embedded 13 pages/cpu s21644 r8192 d23412 u53248 [ 0.000000] pcpu-alloc: s21644 r8192 d23412 u53248 alloc=13*4096 [ 0.000000] pcpu-alloc: [0] 0 [0] 1 [ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 130048 [ 0.000000] Kernel command line: root=/dev/sdb12 console=tty printk.time earlyprintk ignore_loglevel video=ofonly [ 0.000000] Dentry cache hash table entries: 65536 (order: 6, 262144 bytes, linear) [ 0.000000] Inode-cache hash table entries: 32768 (order: 5, 131072 bytes, linear) [ 0.000000] mem auto-init: stack:off, heap alloc:off, heap free:off [ 0.000000] Memory: 498904K/524288K available (6756K kernel code, 352K rwdata, 1276K rodata, 1232K init, 176K bss, 25384K reserved, 0K cma-reserved, 0K highmem) [ 0.000000] Kernel virtual memory layout: [ 0.000000] * 0xffbbf000..0xfffff000 : fixmap [ 0.000000] * 0xff400000..0xff800000 : highmem PTEs [ 0.000000] * 0xff2fd000..0xff400000 : early ioremap [ 0.000000] * 0xe1000000..0xff2fd000 : vmalloc & ioremap [ 0.000000] rcu: Hierarchical RCU implementation. [ 0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 10 jiffies. [ 0.000000] NR_IRQS: 512, nr_irqs: 512, preallocated irqs: 16 [ 0.000000] irq: Found primary Apple PIC /pci/mac-io for 64 irqs [ 0.000000] irq: Found slave Apple PIC /pci/mac-io for 64 irqs cascade: 27 [ 0.000000] irq: System has 128 possible interrupts [ 0.000000] GMT Delta read from XPRAM: -360 minutes, DST: on [ 0.000000] random: get_random_u32 called from start_kernel+0x36c/0x4d8 with crng_init=0 [ 0.000000] time_init: decrementer frequency = 16.673600 MHz [ 0.000000] time_init: processor frequency = 297.000000 MHz [ 0.000032] clocksource: timebase: mask: 0xffffffffffffffff max_cycles: 0x3d86ef1dd, max_idle_ns: 440795202338 ns [ 0.000087] clocksource: timebase mult[3bf99ce7] shift[24] registered [ 0.000185] clockevent: decrementer mult[444b897] shift[32] cpu[0] [ 0.001267] Console: colour dummy device 80x25 [ 0.001331] printk: console [tty0] enabled [ 0.001377] printk: bootconsole [udbg0] disabled [ 0.001736] pmac_zilog: serial modem detected [ 0.001879] pid_max: default: 32768 minimum: 301 [ 0.002339] Mount-cache hash table entries: 1024 (order: 0, 4096 bytes, linear) [ 0.002417] Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes, linear) [ 0.006910] rcu: Hierarchical SRCU implementation. [ 0.007931] smp: Bringing up secondary CPUs ... [ 0.007979] smp: Brought up 1 node, 1 CPU [ 0.009098] devtmpfs: initialized [ 0.009636] Duplicate name in PowerPC,750, renamed to "l2-cache#1" [ 0.012469] Duplicate name in pci, renamed to "mac-io#1" [ 0.013986] Duplicate name in pci, renamed to "pccard#1" [ 0.016681] Found Grackle (MPC106) PCI host bridge at 0x0000000080000000. Firmware bus number: 0->0 [ 0.016754] PCI host bridge /pci (primary) ranges: [ 0.016840] IO 0x00000000fe000000..0x00000000fe7fffff -> 0x0000000000000000 [ 0.017325] MEM 0x00000000fd000000..0x00000000fdffffff -> 0x0000000000000000 [ 0.017374] MEM 0x0000000080000000..0x00000000fcffffff -> 0x0000000080000000 [ 0.018235] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns [ 0.018361] futex hash table entries: 512 (order: 2, 16384 bytes, linear) [ 0.019228] NET: Registered protocol family 16 [ 0.022308] PMU i2c /pci/mac-io/via-pmu [ 0.022399] channel 1 bus [ 0.022441] channel 2 bus [ 0.031459] PCI: Probing PCI hardware [ 0.034359] PCI host bridge to bus 0000:00 [ 0.034439] pci_bus 0000:00: root bus resource [io 0x0000-0x7fffff] [ 0.034504] pci_bus 0000:00: root bus resource [mem 0xfd000000-0xfdffffff] (bus address [0x00000000-0x00ffffff]) [ 0.034567] pci_bus 0000:00: root bus resource [mem 0x80000000-0xfcffffff] [ 0.034622] pci_bus 0000:00: root bus resource [bus 00-ff] [ 0.034676] pci_bus 0000:00: busn_res: [bus 00-ff] end is updated to ff [ 0.034869] pci 0000:00:00.0: [1057:0002] type 00 class 0x060000 [ 0.036260] pci 0000:00:0d.0: [106b:0010] type 00 class 0xff0000 [ 0.036357] pci 0000:00:0d.0: reg 0x10: [mem 0xf4000000-0xf407ffff] [ 0.037562] pci 0000:00:10.0: [106b:0010] type 00 class 0xff0000 [ 0.037655] pci 0000:00:10.0: reg 0x10: [mem 0xf3000000-0xf307ffff] [ 0.039108] pci 0000:00:11.0: [1002:4c47] type 00 class 0x030000 [ 0.039203] pci 0000:00:11.0: reg 0x10: [mem 0x82000000-0x82ffffff] [ 0.039262] pci 0000:00:11.0: reg 0x14: [io 0x0400-0x04ff] [ 0.039317] pci 0000:00:11.0: reg 0x18: [mem 0x82fff000-0x82ffffff] [ 0.039400] pci 0000:00:11.0: reg 0x30: [mem 0xfd000000-0xfd01ffff pref] [ 0.040692] pci 0000:00:13.0: [104c:ac15] type 02 class 0x060700 [ 0.040792] pci 0000:00:13.0: reg 0x10: [mem 0x81803000-0x81803fff] [ 0.041404] pci 0000:00:13.1: [104c:ac15] type 02 class 0x060700 [ 0.041497] pci 0000:00:13.1: reg 0x10: [mem 0x81802000-0x81802fff] [ 0.043150] pci_bus 0000:01: extended config space not accessible [ 0.044205] pci_bus 0000:01: busn_res: [bus 01-ff] end is updated to 04 [ 0.044335] pci_bus 0000:05: extended config space not accessible [ 0.044734] pci_bus 0000:05: busn_res: [bus 05-ff] end is updated to 08 [ 0.044818] pci_bus 0000:00: busn_res: [bus 00-ff] end is updated to 08 [ 0.045347] PCI: Cannot allocate resource region 2 of device 0000:00:11.0, will remap [ 0.045449] PCI 0000:00 Cannot reserve Legacy IO [io 0x0000-0x0fff] [ 0.045618] pci 0000:00:13.0: BAR 9: assigned [mem 0x84000000-0x87ffffff pref] [ 0.045687] pci 0000:00:13.0: BAR 10: assigned [mem 0x88000000-0x8bffffff] [ 0.045741] pci 0000:00:13.1: BAR 9: assigned [mem 0x8c000000-0x8fffffff pref] [ 0.045801] pci 0000:00:13.1: BAR 10: assigned [mem 0x90000000-0x93ffffff] [ 0.045853] pci 0000:00:11.0: BAR 6: assigned [mem 0xfd000000-0xfd01ffff pref] [ 0.045914] pci 0000:00:11.0: BAR 2: assigned [mem 0xfd020000-0xfd020fff] [ 0.045969] pci 0000:00:13.0: BAR 7: assigned [io 0x1000-0x10ff] [ 0.046018] pci 0000:00:13.0: BAR 8: assigned [io 0x1100-0x11ff] [ 0.046066] pci 0000:00:13.1: BAR 7: assigned [io 0x1200-0x12ff] [ 0.046114] pci 0000:00:13.1: BAR 8: assigned [io 0x1300-0x13ff] [ 0.046181] pci 0000:00:13.0: CardBus bridge to [bus 01-04] [ 0.046225] pci 0000:00:13.0: bridge window [io 0x1000-0x10ff] [ 0.046272] pci 0000:00:13.0: bridge window [io 0x1100-0x11ff] [ 0.046319] pci 0000:00:13.0: bridge window [mem 0x84000000-0x87ffffff pref] [ 0.046376] pci 0000:00:13.0: bridge window [mem 0x88000000-0x8bffffff] [ 0.046426] pci 0000:00:13.1: CardBus bridge to [bus 05-08] [ 0.046468] pci 0000:00:13.1: bridge window [io 0x1200-0x12ff] [ 0.046514] pci 0000:00:13.1: bridge window [io 0x1300-0x13ff] [ 0.046561] pci 0000:00:13.1: bridge window [mem 0x8c000000-0x8fffffff pref] [ 0.046617] pci 0000:00:13.1: bridge window [mem 0x90000000-0x93ffffff] [ 0.046669] pci_bus 0000:00: resource 4 [io 0x0000-0x7fffff] [ 0.046714] pci_bus 0000:00: resource 5 [mem 0xfd000000-0xfdffffff] [ 0.046761] pci_bus 0000:00: resource 6 [mem 0x80000000-0xfcffffff] [ 0.046808] pci_bus 0000:01: resource 0 [io 0x1000-0x10ff] [ 0.046852] pci_bus 0000:01: resource 1 [io 0x1100-0x11ff] [ 0.046897] pci_bus 0000:01: resource 2 [mem 0x84000000-0x87ffffff pref] [ 0.046944] pci_bus 0000:01: resource 3 [mem 0x88000000-0x8bffffff] [ 0.046991] pci_bus 0000:05: resource 0 [io 0x1200-0x12ff] [ 0.047036] pci_bus 0000:05: resource 1 [io 0x1300-0x13ff] [ 0.047080] pci_bus 0000:05: resource 2 [mem 0x8c000000-0x8fffffff pref] [ 0.047128] pci_bus 0000:05: resource 3 [mem 0x90000000-0x93ffffff] [ 0.156520] pci 0000:00:11.0: vgaarb: VGA device added: decodes=io+mem,owns=mem,locks=none [ 0.156743] pci 0000:00:11.0: vgaarb: bridge control possible [ 0.156787] pci 0000:00:11.0: vgaarb: setting as boot device (VGA legacy resources not available) [ 0.156844] vgaarb: loaded [ 0.157644] SCSI subsystem initialized [ 0.159269] libata version 3.00 loaded. [ 0.160004] usbcore: registered new interface driver usbfs [ 0.160378] usbcore: registered new interface driver hub [ 0.160563] usbcore: registered new device driver usb [ 0.173112] clocksource: Switched to clocksource timebase [ 0.233400] NET: Registered protocol family 2 [ 0.237243] tcp_listen_portaddr_hash hash table entries: 512 (order: 0, 6144 bytes, linear) [ 0.237414] TCP established hash table entries: 4096 (order: 2, 16384 bytes, linear) [ 0.237671] TCP bind hash table entries: 4096 (order: 3, 32768 bytes, linear) [ 0.238089] TCP: Hash tables configured (established 4096 bind 4096) [ 0.238461] UDP hash table entries: 256 (order: 1, 8192 bytes, linear) [ 0.238673] UDP-Lite hash table entries: 256 (order: 1, 8192 bytes, linear) [ 0.239189] NET: Registered protocol family 1 [ 0.240533] RPC: Registered named UNIX socket transport module. [ 0.240596] RPC: Registered udp transport module. [ 0.240629] RPC: Registered tcp transport module. [ 0.240662] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 0.240889] PCI: CLS 32 bytes, default 32 [ 0.242427] Thermal assist unit using workqueue, shrink_timer: 2000 ms [ 0.249006] workingset: timestamp_bits=30 max_order=17 bucket_order=0 [ 0.250608] squashfs: version 4.0 (2009/01/31) Phillip Lougher [ 0.252176] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253) [ 0.252264] io scheduler mq-deadline registered [ 0.252949] pci 0000:00:11.0: enabling device (0086 -> 0087) [ 0.253051] Using unsupported 1024x768 (null) at 82801000, depth=32, pitch=4096 [ 0.377574] Console: switching to colour frame buffer device 128x48 [ 0.499489] fb0: Open Firmware frame buffer device on /pci/ATY,264LT-G [ 0.501705] pmac_zilog: 0.6 (Benjamin Herrenschmidt ) [ 0.504638] Non-volatile memory driver v1.3 [ 0.515907] brd: module loaded [ 0.543225] loop: module loaded [ 0.544361] MacIO PCI driver attached to Gatwick chipset [ 0.546794] MacIO PCI driver attached to Heathrow chipset [ 0.557252] swim3 0.00015000:floppy: [fd0] SWIM3 floppy controller in media bay [ 0.563152] 0.00013020:ch-a: ttyS0 at MMIO 0xf3013020 (irq = 16, base_baud = 230400) is a Z85c30 ESCC - Serial port [ 0.569131] 0.00013000:ch-b: ttyS1 at MMIO 0xf3013000 (irq = 17, base_baud = 230400) is a Z85c30 ESCC - Infrared port [ 0.575476] macio: fixed media-bay irq on gatwick [ 0.579140] macio: fixed left floppy irqs [ 0.580767] swim3 1.00015000:floppy: [fd1] Couldn't request interrupt [ 0.582575] swim3: probe of 1.00015000:floppy failed with error -16 [ 0.584335] macio: fixed left ide irqs [ 0.586482] macio: fixed SCC irqs on gatwick [ 0.587900] 1.00013020:ch-a: ttyS2 at MMIO 0xf4013020 (irq = 79, base_baud = 230400) is a Z85c30 ESCC - Internal modem [ 0.592911] mediabay0: Registered Heathrow media-bay [ 0.804902] mediabay1: Registered Heathrow media-bay [ 0.806224] mediabay0: Bay contains an ATA device [ 1.025793] PMU Backlight initialized (pmubl) [ 1.029207] mesh: configured for synchronous 5 MB/s [ 1.254583] mesh: performing initial bus reset... [ 3.195944] random: fast init done [ 3.290995] adb device [2]: 2 0xC3 [ 3.347336] adb device [3]: 3 0x1 [ 3.400714] adb device [7]: 7 0x1F [ 3.463552] ADB keyboard at 2 has handler 0xC3 [ 3.511986] Detected ADB keyboard, type ANSI. [ 3.560497] input: ADB keyboard as /devices/virtual/input/input0 [ 3.609689] input: ADB Powerbook buttons as /devices/virtual/input/input1 [ 3.722584] ADB mouse (trackpad) at 3 has handler 0x4 [ 3.771117] input: ADB mouse as /devices/virtual/input/input2 [ 5.364576] scsi host0: MESH [ 8.724472] pata-macio 0.00020000:ata0: Activating pata-macio chipset Heathrow ATA, Apple bus ID 0 [ 8.779313] scsi host1: pata_macio [ 8.831149] ata1: PATA max MWDMA2 irq 30 [ 9.924466] pata-macio 0.00021000:ata1: Activating pata-macio chipset Heathrow ATA, Apple bus ID 1 [ 9.980224] scsi host2: pata_macio [ 10.032486] ata2: PATA max MWDMA2 irq 36 [ 10.114463] pata-macio 1.00021000:ata4: Activating pata-macio chipset Heathrow ATA, Apple bus ID 4 [ 10.166763] genirq: Flags mismatch irq 36. 00000000 (pata-macio[1.00021000:ata4]) vs. 00000000 (pata-macio[0.00021000:ata1]) [ 10.220504] pata-macio: probe of 1.00021000:ata4 failed with error -16 [ 10.606748] ata1.00: ATA-8: WDC WD1600BEVE-00A0HT0, 11.01A11, max UDMA/100 [ 10.661056] ata1.00: 312581808 sectors, multi 8: LBA48 [ 10.715245] ata2.00: ATA-6: ST9160821A, 3.ALD, max UDMA/100 [ 10.768566] ata2.00: 312581808 sectors, multi 0: LBA48 [ 10.825560] eth0: BMAC at 00:05:02:f5:57:58 [ 10.930610] scsi 1:0:0:0: Direct-Access ATA WDC WD1600BEVE-0 1A11 PQ: 0 ANSI: 5 [ 10.986639] sd 1:0:0:0: [sda] 312581808 512-byte logical blocks: (160 GB/149 GiB) [ 11.040331] sd 1:0:0:0: Attached scsi generic sg0 type 0 [ 11.095816] sd 1:0:0:0: [sda] Write Protect is off [ 11.148687] sd 1:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 11.205012] scsi 2:0:0:0: Direct-Access ATA ST9160821A D PQ: 0 ANSI: 5 [ 11.267578] aoe: AoE v85 initialised. [ 11.319759] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 11.375839] sd 2:0:0:0: [sdb] 312581808 512-byte logical blocks: (160 GB/149 GiB) [ 11.429638] sd 2:0:0:0: Attached scsi generic sg1 type 0 [ 11.484293] sd 2:0:0:0: [sdb] Write Protect is off [ 11.536730] sd 2:0:0:0: [sdb] Mode Sense: 00 3a 00 00 [ 11.588802] sd 1:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 11.642679] ehci-pci: EHCI PCI platform driver [ 11.699032] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 11.753403] sda: [mac] sda1 sda2 sda3 sda4 sda5 sda6 sda7 sda8 sda9 sda10 sda11 sda12 sda13 sda14 sda15 [ 11.807159] sd 2:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 11.862419] ohci-pci: OHCI PCI platform driver [ 11.934299] sd 1:0:0:0: [sda] Attached SCSI disk [ 11.990608] sdb: [mac] sdb1 sdb2 sdb3 sdb4 sdb5 sdb6 sdb7 sdb8 sdb9 sdb10 sdb11 sdb12 sdb13 sdb14 [ 12.048173] usbcore: registered new interface driver uas [ 12.111529] usbcore: registered new interface driver usb-storage [ 12.173362] sd 2:0:0:0: [sdb] Attached SCSI disk [ 12.238200] mousedev: PS/2 mouse device common for all mice [ 12.302805] rtc-generic rtc-generic: registered as rtc0 [ 12.363292] i2c /dev entries driver [ 12.423501] PowerMac i2c bus pmu 2 registered [ 12.484024] PowerMac i2c bus pmu 1 registered [ 12.549243] usbcore: registered new interface driver usbhid [ 12.606916] usbhid: USB HID core driver [ 12.668663] NET: Registered protocol family 17 [ 12.725878] drmem: No dynamic reconfiguration memory found [ 12.796110] EXT4-fs (sdb12): mounting ext3 file system using the ext4 subsystem [ 12.955153] EXT4-fs (sdb12): mounted filesystem with ordered data mode. Opts: (null). Quota mode: disabled. [ 13.012617] VFS: Mounted root (ext3 filesystem) readonly on device 8:28. [ 13.082266] Freeing unused kernel memory: 1232K [ 13.139944] Kernel memory protection not selected by kernel config. [ 13.197395] Run /sbin/init as init process [ 13.254024] with arguments: [ 13.309652] /sbin/init [ 13.363193] earlyprintk [ 13.414832] with environment: [ 13.465701] HOME=/ [ 13.515750] TERM=linux [ 22.135191] random: crng init done [ 23.690771] phy registers: [ 23.690835] 0000 0000 0000 0000 0000 0000 0000 0000 [ 23.751555] 0000 0000 0000 0000 0000 0000 0000 0000 [ 23.812050] 0000 0000 0000 0000 0000 0000 0000 0000 [ 23.871588] 0000 0000 0000 0000 0000 0000 0000 0000 [ 31.018674] Adding 1048572k swap on /dev/sdb13. Priority:-2 extents:1 across:1048572k [ 31.301625] EXT4-fs (sdb12): re-mounted. Opts: (null). Quota mode: disabled. [ 32.111538] EXT4-fs (sdb12): re-mounted. Opts: errors=remount-ro. Quota mode: disabled. [ 36.546444] EXT4-fs (sdb14): mounting ext3 file system using the ext4 subsystem [ 36.935732] EXT4-fs (sdb14): mounted filesystem with ordered data mode. Opts: (null). Quota mode: disabled. [ 52.979218] phy registers: [ 52.979284] 0000 0000 0000 0000 0000 0000 0000 0000 [ 52.989778] 0000 0000 0000 0000 0000 0000 0000 0000 [ 53.000220] 0000 0000 0000 0000 0000 0000 0000 0000 [ 53.010662] 0000 0000 0000 0000 0000 0000 0000 0000 [ 0.000000] printk: debug: ignoring loglevel setting. [ 0.000000] Total memory = 512MB; using 1024kB for hash table [ 0.000000] Activating Kernel Userspace Execution Prevention [ 0.000000] Activating Kernel Userspace Access Protection [ 0.000000] Linux version 5.13.0-pmac (johnson@ThinkPad) (powerpc-linux-gnu-gcc (Debian 8.3.0-2) 8.3.0, GNU ld (GNU Binutils for Debian) 2.31.1) #5 SMP Sat Jul 24 11:00:06 MDT 2021 [ 0.000000] ioremap() called early from probe_one_macio+0x130/0x268. Use early_ioremap() instead [ 0.000000] Found a Gatwick mac-io controller, rev: 1, mapped at 0x(ptrval) [ 0.000000] ioremap() called early from probe_one_macio+0x130/0x268. Use early_ioremap() instead [ 0.000000] Found a Heathrow mac-io controller, rev: 1, mapped at 0x(ptrval) [ 0.000000] PowerMac motherboard: PowerBook Wallstreet [ 0.000000] ioremap() called early from find_via_pmu+0x244/0x56c. Use early_ioremap() instead [ 0.000000] PMU driver v2 initialized for PowerBook G3 Series, firmware: 0a [ 0.000000] Using PowerMac machine description [ 0.000000] printk: bootconsole [udbg0] enabled [ 0.000000] CPU maps initialized for 1 thread per core [ 0.000000] (thread shift is 0) [ 0.000000] ----------------------------------------------------- [ 0.000000] phys_mem_size = 0x20000000 [ 0.000000] dcache_bsize = 0x20 [ 0.000000] icache_bsize = 0x20 [ 0.000000] cpu_features = 0x000000000501a008 [ 0.000000] possible = 0x00000000277de14a [ 0.000000] always = 0x0000000001000000 [ 0.000000] cpu_user_features = 0x8c000001 0x00000000 [ 0.000000] mmu_features = 0x00000001 [ 0.000000] Hash_size = 0x100000 [ 0.000000] Hash_mask = 0x3fff [ 0.000000] ----------------------------------------------------- [ 0.000000] ioremap() called early from pmac_setup_arch+0x10c/0x294. Use early_ioremap() instead [ 0.000000] nvram: OF partition at 0x1800 [ 0.000000] nvram: XP partition at 0x1300 [ 0.000000] nvram: NR partition at 0x1400 [ 0.000000] Top of RAM: 0x20000000, Total RAM: 0x20000000 [ 0.000000] Memory hole size: 0MB [ 0.000000] Zone ranges: [ 0.000000] DMA [mem 0x0000000000000000-0x000000001fffffff] [ 0.000000] Normal empty [ 0.000000] HighMem empty [ 0.000000] Movable zone start for each node [ 0.000000] Early memory node ranges [ 0.000000] node 0: [mem 0x0000000000000000-0x000000001fffffff] [ 0.000000] Initmem setup node 0 [mem 0x0000000000000000-0x000000001fffffff] [ 0.000000] On node 0 totalpages: 131072 [ 0.000000] DMA zone: 1024 pages used for memmap [ 0.000000] DMA zone: 0 pages reserved [ 0.000000] DMA zone: 131072 pages, LIFO batch:31 [ 0.000000] percpu: Embedded 13 pages/cpu s21644 r8192 d23412 u53248 [ 0.000000] pcpu-alloc: s21644 r8192 d23412 u53248 alloc=13*4096 [ 0.000000] pcpu-alloc: [0] 0 [0] 1 [ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 130048 [ 0.000000] Kernel command line: root=/dev/sdb12 console=tty printk.time earlyprintk ignore_loglevel video=ofonly [ 0.000000] Dentry cache hash table entries: 65536 (order: 6, 262144 bytes, linear) [ 0.000000] Inode-cache hash table entries: 32768 (order: 5, 131072 bytes, linear) [ 0.000000] mem auto-init: stack:off, heap alloc:off, heap free:off [ 0.000000] Kernel virtual memory layout: [ 0.000000] * 0xffbbf000..0xfffff000 : fixmap [ 0.000000] * 0xff400000..0xff800000 : highmem PTEs [ 0.000000] * 0xff2fd000..0xff400000 : early ioremap [ 0.000000] * 0xe1000000..0xff2fd000 : vmalloc & ioremap [ 0.000000] Memory: 498896K/524288K available (6836K kernel code, 360K rwdata, 1288K rodata, 1140K init, 172K bss, 25392K reserved, 0K cma-reserved, 0K highmem) [ 0.000000] rcu: Hierarchical RCU implementation. [ 0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 10 jiffies. [ 0.000000] NR_IRQS: 512, nr_irqs: 512, preallocated irqs: 16 [ 0.000000] irq: Found primary Apple PIC /pci/mac-io for 64 irqs [ 0.000000] irq: Found slave Apple PIC /pci/mac-io for 64 irqs cascade: 27 [ 0.000000] irq: System has 128 possible interrupts [ 0.000000] GMT Delta read from XPRAM: -360 minutes, DST: on [ 0.000000] random: get_random_u32 called from start_kernel+0x370/0x4dc with crng_init=0 [ 0.000000] time_init: decrementer frequency = 16.673750 MHz [ 0.000000] time_init: processor frequency = 297.000000 MHz [ 0.000034] clocksource: timebase: mask: 0xffffffffffffffff max_cycles: 0x3d8713646, max_idle_ns: 440795202574 ns [ 0.000085] clocksource: timebase mult[3bf9798b] shift[24] registered [ 0.000181] clockevent: decrementer mult[444bb1b] shift[32] cpu[0] [ 0.001233] Console: colour dummy device 80x25 [ 0.001291] printk: console [tty0] enabled [ 0.001333] printk: bootconsole [udbg0] disabled [ 0.001686] pmac_zilog: serial modem detected [ 0.001830] pid_max: default: 32768 minimum: 301 [ 0.002280] Mount-cache hash table entries: 1024 (order: 0, 4096 bytes, linear) [ 0.002355] Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes, linear) [ 0.006873] rcu: Hierarchical SRCU implementation. [ 0.007895] smp: Bringing up secondary CPUs ... [ 0.007938] smp: Brought up 1 node, 1 CPU [ 0.009038] devtmpfs: initialized [ 0.009585] Duplicate name in PowerPC,750, renamed to "l2-cache#1" [ 0.012405] Duplicate name in pci, renamed to "mac-io#1" [ 0.013898] Duplicate name in pci, renamed to "pccard#1" [ 0.016597] Found Grackle (MPC106) PCI host bridge at 0x0000000080000000. Firmware bus number: 0->0 [ 0.016679] PCI host bridge /pci (primary) ranges: [ 0.016767] IO 0x00000000fe000000..0x00000000fe7fffff -> 0x0000000000000000 [ 0.017251] MEM 0x00000000fd000000..0x00000000fdffffff -> 0x0000000000000000 [ 0.017299] MEM 0x0000000080000000..0x00000000fcffffff -> 0x0000000080000000 [ 0.018163] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns [ 0.018274] futex hash table entries: 512 (order: 2, 16384 bytes, linear) [ 0.019186] NET: Registered protocol family 16 [ 0.022323] PMU i2c /pci/mac-io/via-pmu [ 0.022425] channel 1 bus [ 0.022461] channel 2 bus [ 0.026482] wait_for_initramfs() called before rootfs_initcalls [ 0.031514] PCI: Probing PCI hardware [ 0.034512] PCI host bridge to bus 0000:00 [ 0.034587] pci_bus 0000:00: root bus resource [io 0x0000-0x7fffff] [ 0.034653] pci_bus 0000:00: root bus resource [mem 0xfd000000-0xfdffffff] (bus address [0x00000000-0x00ffffff]) [ 0.034716] pci_bus 0000:00: root bus resource [mem 0x80000000-0xfcffffff] [ 0.034772] pci_bus 0000:00: root bus resource [bus 00-ff] [ 0.034825] pci_bus 0000:00: busn_res: [bus 00-ff] end is updated to ff [ 0.035009] pci 0000:00:00.0: [1057:0002] type 00 class 0x060000 [ 0.036405] pci 0000:00:0d.0: [106b:0010] type 00 class 0xff0000 [ 0.036499] pci 0000:00:0d.0: reg 0x10: [mem 0xf4000000-0xf407ffff] [ 0.037714] pci 0000:00:10.0: [106b:0010] type 00 class 0xff0000 [ 0.037805] pci 0000:00:10.0: reg 0x10: [mem 0xf3000000-0xf307ffff] [ 0.039252] pci 0000:00:11.0: [1002:4c47] type 00 class 0x030000 [ 0.039347] pci 0000:00:11.0: reg 0x10: [mem 0x82000000-0x82ffffff] [ 0.039406] pci 0000:00:11.0: reg 0x14: [io 0x0400-0x04ff] [ 0.039460] pci 0000:00:11.0: reg 0x18: [mem 0x82fff000-0x82ffffff] [ 0.039543] pci 0000:00:11.0: reg 0x30: [mem 0xfd000000-0xfd01ffff pref] [ 0.040820] pci 0000:00:13.0: [104c:ac15] type 02 class 0x060700 [ 0.040916] pci 0000:00:13.0: reg 0x10: [mem 0x81803000-0x81803fff] [ 0.041543] pci 0000:00:13.1: [104c:ac15] type 02 class 0x060700 [ 0.041634] pci 0000:00:13.1: reg 0x10: [mem 0x81802000-0x81802fff] [ 0.043273] pci_bus 0000:01: extended config space not accessible [ 0.044296] pci_bus 0000:01: busn_res: [bus 01-ff] end is updated to 04 [ 0.044434] pci_bus 0000:05: extended config space not accessible [ 0.044831] pci_bus 0000:05: busn_res: [bus 05-ff] end is updated to 08 [ 0.044915] pci_bus 0000:00: busn_res: [bus 00-ff] end is updated to 08 [ 0.045401] PCI: Cannot allocate resource region 2 of device 0000:00:11.0, will remap [ 0.045500] PCI 0000:00 Cannot reserve Legacy IO [io 0x0000-0x0fff] [ 0.045689] pci 0000:00:13.0: BAR 9: assigned [mem 0x84000000-0x87ffffff pref] [ 0.045758] pci 0000:00:13.0: BAR 10: assigned [mem 0x88000000-0x8bffffff] [ 0.045811] pci 0000:00:13.1: BAR 9: assigned [mem 0x8c000000-0x8fffffff pref] [ 0.045872] pci 0000:00:13.1: BAR 10: assigned [mem 0x90000000-0x93ffffff] [ 0.045924] pci 0000:00:11.0: BAR 6: assigned [mem 0xfd000000-0xfd01ffff pref] [ 0.045988] pci 0000:00:11.0: BAR 2: assigned [mem 0xfd020000-0xfd020fff] [ 0.046044] pci 0000:00:13.0: BAR 7: assigned [io 0x1000-0x10ff] [ 0.046093] pci 0000:00:13.0: BAR 8: assigned [io 0x1100-0x11ff] [ 0.046142] pci 0000:00:13.1: BAR 7: assigned [io 0x1200-0x12ff] [ 0.046190] pci 0000:00:13.1: BAR 8: assigned [io 0x1300-0x13ff] [ 0.046256] pci 0000:00:13.0: CardBus bridge to [bus 01-04] [ 0.046299] pci 0000:00:13.0: bridge window [io 0x1000-0x10ff] [ 0.046346] pci 0000:00:13.0: bridge window [io 0x1100-0x11ff] [ 0.046393] pci 0000:00:13.0: bridge window [mem 0x84000000-0x87ffffff pref] [ 0.046450] pci 0000:00:13.0: bridge window [mem 0x88000000-0x8bffffff] [ 0.046499] pci 0000:00:13.1: CardBus bridge to [bus 05-08] [ 0.046542] pci 0000:00:13.1: bridge window [io 0x1200-0x12ff] [ 0.046588] pci 0000:00:13.1: bridge window [io 0x1300-0x13ff] [ 0.046634] pci 0000:00:13.1: bridge window [mem 0x8c000000-0x8fffffff pref] [ 0.046690] pci 0000:00:13.1: bridge window [mem 0x90000000-0x93ffffff] [ 0.046742] pci_bus 0000:00: resource 4 [io 0x0000-0x7fffff] [ 0.046787] pci_bus 0000:00: resource 5 [mem 0xfd000000-0xfdffffff] [ 0.046833] pci_bus 0000:00: resource 6 [mem 0x80000000-0xfcffffff] [ 0.046880] pci_bus 0000:01: resource 0 [io 0x1000-0x10ff] [ 0.046924] pci_bus 0000:01: resource 1 [io 0x1100-0x11ff] [ 0.046968] pci_bus 0000:01: resource 2 [mem 0x84000000-0x87ffffff pref] [ 0.047016] pci_bus 0000:01: resource 3 [mem 0x88000000-0x8bffffff] [ 0.047063] pci_bus 0000:05: resource 0 [io 0x1200-0x12ff] [ 0.047107] pci_bus 0000:05: resource 1 [io 0x1300-0x13ff] [ 0.047152] pci_bus 0000:05: resource 2 [mem 0x8c000000-0x8fffffff pref] [ 0.047199] pci_bus 0000:05: resource 3 [mem 0x90000000-0x93ffffff] [ 0.156401] pci 0000:00:11.0: vgaarb: VGA device added: decodes=io+mem,owns=mem,locks=none [ 0.156619] pci 0000:00:11.0: vgaarb: bridge control possible [ 0.156662] pci 0000:00:11.0: vgaarb: setting as boot device (VGA legacy resources not available) [ 0.156719] vgaarb: loaded [ 0.157518] SCSI subsystem initialized [ 0.159169] libata version 3.00 loaded. [ 0.159881] usbcore: registered new interface driver usbfs [ 0.160260] usbcore: registered new interface driver hub [ 0.160440] usbcore: registered new device driver usb [ 0.173159] clocksource: Switched to clocksource timebase [ 0.233026] NET: Registered protocol family 2 [ 0.233806] IP idents hash table entries: 8192 (order: 4, 65536 bytes, linear) [ 0.238482] tcp_listen_portaddr_hash hash table entries: 512 (order: 0, 6144 bytes, linear) [ 0.238662] TCP established hash table entries: 4096 (order: 2, 16384 bytes, linear) [ 0.238916] TCP bind hash table entries: 4096 (order: 3, 32768 bytes, linear) [ 0.239333] TCP: Hash tables configured (established 4096 bind 4096) [ 0.239709] UDP hash table entries: 256 (order: 1, 8192 bytes, linear) [ 0.239894] UDP-Lite hash table entries: 256 (order: 1, 8192 bytes, linear) [ 0.240408] NET: Registered protocol family 1 [ 0.241638] RPC: Registered named UNIX socket transport module. [ 0.241708] RPC: Registered udp transport module. [ 0.241742] RPC: Registered tcp transport module. [ 0.241775] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 0.241996] PCI: CLS 32 bytes, default 32 [ 0.242696] Thermal assist unit using workqueue, shrink_timer: 2000 ms [ 0.249648] workingset: timestamp_bits=30 max_order=17 bucket_order=0 [ 0.250959] squashfs: version 4.0 (2009/01/31) Phillip Lougher [ 0.252540] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253) [ 0.252640] io scheduler mq-deadline registered [ 0.253325] pci 0000:00:11.0: enabling device (0086 -> 0087) [ 0.253429] Using unsupported 1024x768 (null) at 82801000, depth=32, pitch=4096 [ 0.377418] Console: switching to colour frame buffer device 128x48 [ 0.499601] fb0: Open Firmware frame buffer device on /pci/ATY,264LT-G [ 0.501857] pmac_zilog: 0.6 (Benjamin Herrenschmidt ) [ 0.504513] Non-volatile memory driver v1.3 [ 0.516023] brd: module loaded [ 0.543336] loop: module loaded [ 0.544438] MacIO PCI driver attached to Gatwick chipset [ 0.547038] MacIO PCI driver attached to Heathrow chipset [ 0.557091] swim3 0.00015000:floppy: [fd0] SWIM3 floppy controller in media bay [ 0.563332] 0.00013020:ch-a: ttyS0 at MMIO 0xf3013020 (irq = 16, base_baud = 230400) is a Z85c30 ESCC - Serial port [ 0.569282] 0.00013000:ch-b: ttyS1 at MMIO 0xf3013000 (irq = 17, base_baud = 230400) is a Z85c30 ESCC - Infrared port [ 0.575535] macio: fixed media-bay irq on gatwick [ 0.579201] macio: fixed left floppy irqs [ 0.580941] swim3 1.00015000:floppy: [fd1] Couldn't request interrupt [ 0.582761] swim3: probe of 1.00015000:floppy failed with error -16 [ 0.584526] macio: fixed left ide irqs [ 0.586668] macio: fixed SCC irqs on gatwick [ 0.588108] 1.00013020:ch-a: ttyS2 at MMIO 0xf4013020 (irq = 79, base_baud = 230400) is a Z85c30 ESCC - Internal modem [ 0.593065] mediabay0: Registered Heathrow media-bay [ 0.805299] mediabay1: Registered Heathrow media-bay [ 0.806640] mediabay0: Bay contains an ATA device [ 1.026262] PMU Backlight initialized (pmubl) [ 1.029692] mesh: configured for synchronous 5 MB/s [ 1.254966] mesh: performing initial bus reset... [ 3.196111] random: fast init done [ 3.295079] adb device [2]: 2 0xC3 [ 3.351225] adb device [3]: 3 0x1 [ 3.404284] adb device [7]: 7 0x1F [ 3.466910] ADB keyboard at 2 has handler 0xC3 [ 3.515129] Detected ADB keyboard, type ANSI. [ 3.563373] input: ADB keyboard as /devices/virtual/input/input0 [ 3.612380] input: ADB Powerbook buttons as /devices/virtual/input/input1 [ 3.724963] ADB mouse (trackpad) at 3 has handler 0x4 [ 3.773250] input: ADB mouse as /devices/virtual/input/input2 [ 5.364978] scsi host0: MESH [ 8.724851] pata-macio 0.00020000:ata0: Activating pata-macio chipset Heathrow ATA, Apple bus ID 0 [ 8.779621] scsi host1: pata_macio [ 8.831363] ata1: PATA max MWDMA2 irq 30 [ 9.924860] pata-macio 0.00021000:ata1: Activating pata-macio chipset Heathrow ATA, Apple bus ID 1 [ 9.980602] scsi host2: pata_macio [ 10.032859] ata2: PATA max MWDMA2 irq 36 [ 10.114843] pata-macio 1.00021000:ata4: Activating pata-macio chipset Heathrow ATA, Apple bus ID 4 [ 10.167007] genirq: Flags mismatch irq 36. 00000000 (pata-macio[1.00021000:ata4]) vs. 00000000 (pata-macio[0.00021000:ata1]) [ 10.220626] pata-macio: probe of 1.00021000:ata4 failed with error -16 [ 10.606751] ata1.00: ATA-8: WDC WD1600BEVE-00A0HT0, 11.01A11, max UDMA/100 [ 10.660936] ata1.00: 312581808 sectors, multi 8: LBA48 [ 10.715040] ata2.00: ATA-6: ST9160821A, 3.ALD, max UDMA/100 [ 10.768261] ata2.00: 312581808 sectors, multi 0: LBA48 [ 10.825254] eth0: BMAC at 00:05:02:f5:57:58 [ 10.930241] scsi 1:0:0:0: Direct-Access ATA WDC WD1600BEVE-0 1A11 PQ: 0 ANSI: 5 [ 10.986425] sd 1:0:0:0: [sda] 312581808 512-byte logical blocks: (160 GB/149 GiB) [ 11.040154] sd 1:0:0:0: Attached scsi generic sg0 type 0 [ 11.095697] sd 1:0:0:0: [sda] Write Protect is off [ 11.148585] sd 1:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 11.211093] scsi 2:0:0:0: Direct-Access ATA ST9160821A D PQ: 0 ANSI: 5 [ 11.268492] aoe: AoE v85 initialised. [ 11.320372] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 11.376693] sd 2:0:0:0: [sdb] 312581808 512-byte logical blocks: (160 GB/149 GiB) [ 11.430565] sd 2:0:0:0: Attached scsi generic sg1 type 0 [ 11.485464] sd 1:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 11.539846] sd 2:0:0:0: [sdb] Write Protect is off [ 11.593116] sd 2:0:0:0: [sdb] Mode Sense: 00 3a 00 00 [ 11.646111] ehci-pci: EHCI PCI platform driver [ 11.702263] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 11.757172] sd 2:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 11.811185] ohci-pci: OHCI PCI platform driver [ 11.865189] sda: [mac] sda1 sda2 sda3 sda4 sda5 sda6 sda7 sda8 sda9 sda10 sda11 sda12 sda13 sda14 sda15 [ 11.928195] usbcore: registered new interface driver uas [ 11.985164] sdb: [mac] sdb1 sdb2 sdb3 sdb4 sdb5 sdb6 sdb7 sdb8 sdb9 sdb10 sdb11 sdb12 sdb13 sdb14 [ 12.054742] sd 1:0:0:0: [sda] Attached SCSI disk [ 12.112684] usbcore: registered new interface driver usb-storage [ 12.180307] sd 2:0:0:0: [sdb] Attached SCSI disk [ 12.247495] mousedev: PS/2 mouse device common for all mice [ 12.312807] rtc-generic rtc-generic: registered as rtc0 [ 12.375823] i2c /dev entries driver [ 12.437317] PowerMac i2c bus pmu 2 registered [ 12.499202] PowerMac i2c bus pmu 1 registered [ 12.566367] usbcore: registered new interface driver usbhid [ 12.625365] usbhid: USB HID core driver [ 12.688244] NET: Registered protocol family 17 [ 12.746808] drmem: No dynamic reconfiguration memory found [ 12.823618] EXT4-fs (sdb12): mounting ext3 file system using the ext4 subsystem [ 12.982958] EXT4-fs (sdb12): mounted filesystem with ordered data mode. Opts: (null). Quota mode: disabled. [ 13.041732] VFS: Mounted root (ext3 filesystem) readonly on device 8:28. [ 13.111616] Freeing unused kernel memory: 1140K [ 13.170549] Kernel memory protection not selected by kernel config. [ 13.229192] Run /sbin/init as init process [ 13.287081] with arguments: [ 13.343949] /sbin/init [ 13.398714] earlyprintk [ 13.451536] with environment: [ 13.503594] HOME=/ [ 13.554840] TERM=linux [ 23.076944] random: crng init done [ 24.633995] phy registers: [ 24.634056] 0000 0000 0000 0000 0000 0000 0000 0000 [ 24.695940] 0000 0000 0000 0000 0000 0000 0000 0000 [ 24.757624] 0000 0000 0000 0000 0000 0000 0000 0000 [ 24.818369] 0000 0000 0000 0000 0000 0000 0000 0000 [ 32.389414] Adding 1048572k swap on /dev/sdb13. Priority:-2 extents:1 across:1048572k [ 32.684653] EXT4-fs (sdb12): re-mounted. Opts: (null). Quota mode: disabled. [ 33.482574] EXT4-fs (sdb12): re-mounted. Opts: errors=remount-ro. Quota mode: disabled. [ 38.150203] EXT4-fs (sdb14): mounting ext3 file system using the ext4 subsystem [ 38.517897] EXT4-fs (sdb14): mounted filesystem with ordered data mode. Opts: (null). Quota mode: disabled. [ 63.511965] phy registers: [ 63.512022] 0000 0000 0000 0000 0000 0000 0000 0000 [ 63.522496] 0000 0000 0000 0000 0000 0000 0000 0000 [ 63.532925] 0000 0000 0000 0000 0000 0000 0000 0000 [ 63.543355] 0000 0000 0000 0000 0000 0000 0000 0000 [ 105.900581] ------------[ cut here ]------------ [ 105.900680] kernel BUG at arch/powerpc/kernel/interrupt.c:49! [ 105.900989] Oops: Exception in kernel mode, sig: 5 [#1] [ 105.901013] BE PAGE_SIZE=4K MMU=Hash SMP NR_CPUS=2 PowerMac [ 105.901043] Modules linked in: [ 105.901082] CPU: 0 PID: 1886 Comm: gdbus Not tainted 5.13.0-pmac #5 [ 105.901118] NIP: c00115e4 LR: c00115d4 CTR: a66ba840 [ 105.901143] REGS: e2f59e40 TRAP: 0700 Not tainted (5.13.0-pmac) [ 105.901171] MSR: 00021032 CR: 40002424 XER: 00000000 [ 105.901258] GPR00: c001604c e2f59f00 ce113440 0061f840 00000081 00000001 00000000 00653e68 GPR08: 00000000 00000001 501b6b89 00000000 ce1139f0 005cf50c 00801000 a64cf308 GPR16: a64cd2a8 00000000 0060bb70 a6951eb0 0060bb90 a64cf300 00000000 00000000 GPR24: 0061f840 00000000 00653e68 00000000 00000001 00000081 e2f59f40 000000dd [ 105.901637] NIP [c00115e4] system_call_exception+0x60/0x164 [ 105.901701] LR [c00115d4] system_call_exception+0x50/0x164 [ 105.901736] Call Trace: [ 105.901754] [e2f59f00] [c01587c4] ksys_read+0x70/0x118 (unreliable) [ 105.901823] [e2f59f30] [c001604c] ret_from_syscall+0x0/0x28 [ 105.901875] --- interrupt: c00 at 0xa66ba860 [ 105.901901] NIP: a66ba860 LR: a695203c CTR: a68cb1c0 [ 105.901924] REGS: e2f59f40 TRAP: 0c00 Not tainted (5.13.0-pmac) [ 105.901948] MSR: 0000d032 CR: 40002424 XER: 00000000 [ 105.902050] GPR00: 000000dd a39fe9f0 a3a066e0 0061f840 00000081 00000001 00000000 00653e68 GPR08: 00000000 43300000 a695cea0 ffffffff 24004844 005cf50c 00801000 a64cf308 GPR16: a64cd2a8 00000000 0060bb70 a6951eb0 0060bb90 a64cf300 00000000 00000000 GPR24: a68ddae0 00000001 a39fea28 7fffffff 00000000 0061f840 a6a13a94 a39fea2c [ 105.902429] NIP [a66ba860] 0xa66ba860 [ 105.902452] LR [a695203c] 0xa695203c [ 105.902475] --- interrupt: c00 [ 105.902495] Instruction dump: [ 105.902525] 7cdb3378 93810020 7cbc2b78 93a10024 7c9d2378 93e1002c 7d3f4b78 4800d4b9 [ 105.902624] 817e0084 931e0088 69690002 5529fffe <0f090000> 69694000 552997fe 0f090000 [ 105.902733] ---[ end trace f97d1faeb66ae718 ]--- [ 120.441070] Kernel attempted to write user page (a2f66000) - exploit attempt? (uid: 1000) [ 120.441225] BUG: Unable to handle kernel data access on write at 0xa2f66000 [ 120.441251] Faulting instruction address: 0xa6f38ec8 [ 120.441469] Oops: Kernel access of bad area, sig: 11 [#2] [ 120.441493] BE PAGE_SIZE=4K MMU=Hash SMP NR_CPUS=2 PowerMac [ 120.441526] Modules linked in: [ 120.441570] CPU: 0 PID: 1894 Comm: xfdesktop Tainted: G D 5.13.0-pmac #5 [ 120.441606] NIP: a6f38ec8 LR: 004ffc9c CTR: 00005180 [ 120.441630] REGS: e2f65f40 TRAP: 0300 Tainted: G D (5.13.0-pmac) [ 120.441662] MSR: 0000d032 CR: 48422200 XER: 20000000 [ 120.441768] DAR: a2f66000 DSISR: 42000000 GPR00: 00006000 afb31150 a59dd4e0 a2ef2000 00000000 00000000 a2f66000 00000020 GPR08: ffffffc0 ffffffe0 00000000 a6f38d64 88422200 00c7f34c 00e96168 00c4b594 GPR16: afb3123c 00000000 afb3124c 00c4b6b0 00cae040 00e1e080 00c4ace8 00ca9008 GPR24: 00cd44b0 00ecac00 00e6d220 00000300 00000400 00000000 005b5714 00ee2760 [ 120.442163] NIP [a6f38ec8] 0xa6f38ec8 [ 120.442197] LR [004ffc9c] 0x4ffc9c [ 120.442224] Call Trace: [ 120.442260] ---[ end trace f97d1faeb66ae719 ]--- [ 122.607972] ------------[ cut here ]------------ [ 122.608078] kernel BUG at arch/powerpc/kernel/interrupt.c:49! [ 122.608322] Oops: Exception in kernel mode, sig: 5 [#3] [ 122.608346] BE PAGE_SIZE=4K MMU=Hash SMP NR_CPUS=2 PowerMac [ 122.608376] Modules linked in: [ 122.608417] CPU: 0 PID: 1895 Comm: gmain Tainted: G D 5.13.0-pmac #5 [ 122.608453] NIP: c00115e4 LR: c00115d4 CTR: a6fae83c [ 122.608478] REGS: e2f59e40 TRAP: 0700 Tainted: G D (5.13.0-pmac) [ 122.608507] MSR: 00021032 CR: 48004444 XER: 00000000 [ 122.608594] GPR00: c001604c e2f59f00 ce113440 0000000d 00d44580 01002fce 00000000 a4c02ef0 GPR08: a4c02ef0 00000001 501d9c29 00000000 ce1139f0 00c7f34c 00801000 a70cb308 GPR16: a70c92a8 00000000 00cc1af0 00000000 a7135680 00000000 00dfff00 a555aa34 GPR24: 0000000d a4c02ef0 a4c02ef0 00000000 01002fce 00d44580 e2f59f40 00000114 [ 122.608975] NIP [c00115e4] system_call_exception+0x60/0x164 [ 122.609042] LR [c00115d4] system_call_exception+0x50/0x164 [ 122.609077] Call Trace: [ 122.609096] [e2f59f00] [c01587c4] ksys_read+0x70/0x118 (unreliable) [ 122.609166] [e2f59f30] [c001604c] ret_from_syscall+0x0/0x28 [ 122.609219] --- interrupt: c00 at 0xa6fae844 [ 122.609245] NIP: a6fae844 LR: 002ed3cc CTR: 00000000 [ 122.609268] REGS: e2f59f40 TRAP: 0c00 Tainted: G D (5.13.0-pmac) [ 122.609293] MSR: 0000d032 CR: 48004444 XER: 20000000 [ 122.609395] GPR00: 00000114 a555a970 a55626e0 0000000d 00d44580 01002fce 00000000 a4c02ef0 GPR08: a4c02ef0 00000055 a4c03fd8 a6f32520 2400442c 00c7f34c 00801000 a70cb308 GPR16: a70c92a8 00000000 00cc1af0 00000000 a7135680 00000000 00dfff00 a555aa34 GPR24: a555aa38 00000000 003cc310 003cd370 00000000 a555a9a8 003d2ebc 00da0780 [ 122.609774] NIP [a6fae844] 0xa6fae844 [ 122.609798] LR [002ed3cc] 0x2ed3cc [ 122.609820] --- interrupt: c00 [ 122.609841] Instruction dump: [ 122.609870] 7cdb3378 93810020 7cbc2b78 93a10024 7c9d2378 93e1002c 7d3f4b78 4800d4b9 [ 122.609969] 817e0084 931e0088 69690002 5529fffe <0f090000> 69694000 552997fe 0f090000 [ 122.610079] ---[ end trace f97d1faeb66ae71a ]--- [ 0.000000] printk: debug: ignoring loglevel setting. [ 0.000000] Total memory = 512MB; using 1024kB for hash table [ 0.000000] Activating Kernel Userspace Execution Prevention [ 0.000000] Activating Kernel Userspace Access Protection [ 0.000000] Linux version 5.14.0-rc2-pmac-00323-gd8079fac1681 (johnson@ThinkPad) (powerpc-linux-gnu-gcc (Debian 8.3.0-2) 8.3.0, GNU ld (GNU Binutils for Debian) 2.31.1) #7 SMP Sun Jul 25 09:14:32 MDT 2021 [ 0.000000] ioremap() called early from probe_one_macio+0x134/0x26c. Use early_ioremap() instead [ 0.000000] Found a Gatwick mac-io controller, rev: 1, mapped at 0x(ptrval) [ 0.000000] ioremap() called early from probe_one_macio+0x134/0x26c. Use early_ioremap() instead [ 0.000000] Found a Heathrow mac-io controller, rev: 1, mapped at 0x(ptrval) [ 0.000000] PowerMac motherboard: PowerBook Wallstreet [ 0.000000] ioremap() called early from find_via_pmu+0x244/0x56c. Use early_ioremap() instead [ 0.000000] PMU driver v2 initialized for PowerBook G3 Series, firmware: 0a [ 0.000000] Using PowerMac machine description [ 0.000000] printk: bootconsole [udbg0] enabled [ 0.000000] CPU maps initialized for 1 thread per core [ 0.000000] (thread shift is 0) [ 0.000000] ----------------------------------------------------- [ 0.000000] phys_mem_size = 0x20000000 [ 0.000000] dcache_bsize = 0x20 [ 0.000000] icache_bsize = 0x20 [ 0.000000] cpu_features = 0x000000000501a008 [ 0.000000] possible = 0x00000000277de14a [ 0.000000] always = 0x0000000001000000 [ 0.000000] cpu_user_features = 0x8c000001 0x00000000 [ 0.000000] mmu_features = 0x00000001 [ 0.000000] Hash_size = 0x100000 [ 0.000000] Hash_mask = 0x3fff [ 0.000000] ----------------------------------------------------- [ 0.000000] ioremap() called early from pmac_setup_arch+0x10c/0x294. Use early_ioremap() instead [ 0.000000] nvram: OF partition at 0x1800 [ 0.000000] nvram: XP partition at 0x1300 [ 0.000000] nvram: NR partition at 0x1400 [ 0.000000] Top of RAM: 0x20000000, Total RAM: 0x20000000 [ 0.000000] Memory hole size: 0MB [ 0.000000] Zone ranges: [ 0.000000] DMA [mem 0x0000000000000000-0x000000001fffffff] [ 0.000000] Normal empty [ 0.000000] HighMem empty [ 0.000000] Movable zone start for each node [ 0.000000] Early memory node ranges [ 0.000000] node 0: [mem 0x0000000000000000-0x000000001fffffff] [ 0.000000] Initmem setup node 0 [mem 0x0000000000000000-0x000000001fffffff] [ 0.000000] percpu: Embedded 13 pages/cpu s21772 r8192 d23284 u53248 [ 0.000000] pcpu-alloc: s21772 r8192 d23284 u53248 alloc=13*4096 [ 0.000000] pcpu-alloc: [0] 0 [0] 1 [ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 130048 [ 0.000000] Kernel command line: root=/dev/sdb12 console=tty printk.time earlyprintk ignore_loglevel video=ofonly [ 0.000000] Unknown command line parameters: earlyprintk [ 0.000000] Dentry cache hash table entries: 65536 (order: 6, 262144 bytes, linear) [ 0.000000] Inode-cache hash table entries: 32768 (order: 5, 131072 bytes, linear) [ 0.000000] mem auto-init: stack:off, heap alloc:off, heap free:off [ 0.000000] Kernel virtual memory layout: [ 0.000000] * 0xffbbf000..0xfffff000 : fixmap [ 0.000000] * 0xff400000..0xff800000 : highmem PTEs [ 0.000000] * 0xff2f9000..0xff400000 : early ioremap [ 0.000000] * 0xe1000000..0xff2f9000 : vmalloc & ioremap [ 0.000000] * 0xb0000000..0xc0000000 : modules [ 0.000000] Memory: 498880K/524288K available (6840K kernel code, 356K rwdata, 1292K rodata, 1132K init, 184K bss, 25408K reserved, 0K cma-reserved, 0K highmem) [ 0.000000] rcu: Hierarchical RCU implementation. [ 0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 10 jiffies. [ 0.000000] NR_IRQS: 512, nr_irqs: 512, preallocated irqs: 16 [ 0.000000] irq: Found primary Apple PIC /pci/mac-io for 64 irqs [ 0.000000] irq: Found slave Apple PIC /pci/mac-io for 64 irqs cascade: 27 [ 0.000000] irq: System has 128 possible interrupts [ 0.000000] GMT Delta read from XPRAM: -360 minutes, DST: on [ 0.000000] random: get_random_u32 called from start_kernel+0x4b4/0x628 with crng_init=0 [ 0.000000] time_init: decrementer frequency = 16.673800 MHz [ 0.000000] time_init: processor frequency = 297.000000 MHz [ 0.000035] clocksource: timebase: mask: 0xffffffffffffffff max_cycles: 0x3d871f7c9, max_idle_ns: 440795202594 ns [ 0.000091] clocksource: timebase mult[3bf96dc1] shift[24] registered [ 0.000188] clockevent: decrementer mult[444bbf2] shift[32] cpu[0] [ 0.001251] Console: colour dummy device 80x25 [ 0.001311] printk: console [tty0] enabled [ 0.001356] printk: bootconsole [udbg0] disabled [ 0.001715] pmac_zilog: serial modem detected [ 0.001865] pid_max: default: 32768 minimum: 301 [ 0.002315] Mount-cache hash table entries: 1024 (order: 0, 4096 bytes, linear) [ 0.002388] Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes, linear) [ 0.006936] rcu: Hierarchical SRCU implementation. [ 0.007974] smp: Bringing up secondary CPUs ... [ 0.008019] smp: Brought up 1 node, 1 CPU [ 0.009116] devtmpfs: initialized [ 0.009663] Duplicate name in PowerPC,750, renamed to "l2-cache#1" [ 0.012497] Duplicate name in pci, renamed to "mac-io#1" [ 0.014004] Duplicate name in pci, renamed to "pccard#1" [ 0.016649] Found Grackle (MPC106) PCI host bridge at 0x0000000080000000. Firmware bus number: 0->0 [ 0.016720] PCI host bridge /pci (primary) ranges: [ 0.016807] IO 0x00000000fe000000..0x00000000fe7fffff -> 0x0000000000000000 [ 0.017297] MEM 0x00000000fd000000..0x00000000fdffffff -> 0x0000000000000000 [ 0.017347] MEM 0x0000000080000000..0x00000000fcffffff -> 0x0000000080000000 [ 0.018174] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns [ 0.018293] futex hash table entries: 512 (order: 2, 16384 bytes, linear) [ 0.019202] NET: Registered PF_NETLINK/PF_ROUTE protocol family [ 0.022254] PMU i2c /pci/mac-io/via-pmu [ 0.022346] channel 1 bus [ 0.022382] channel 2 bus [ 0.026405] wait_for_initramfs() called before rootfs_initcalls [ 0.031466] PCI: Probing PCI hardware [ 0.034505] PCI host bridge to bus 0000:00 [ 0.034580] pci_bus 0000:00: root bus resource [io 0x0000-0x7fffff] [ 0.034645] pci_bus 0000:00: root bus resource [mem 0xfd000000-0xfdffffff] (bus address [0x00000000-0x00ffffff]) [ 0.034708] pci_bus 0000:00: root bus resource [mem 0x80000000-0xfcffffff] [ 0.034767] pci_bus 0000:00: root bus resource [bus 00-ff] [ 0.034821] pci_bus 0000:00: busn_res: [bus 00-ff] end is updated to ff [ 0.035010] pci 0000:00:00.0: [1057:0002] type 00 class 0x060000 [ 0.036441] pci 0000:00:0d.0: [106b:0010] type 00 class 0xff0000 [ 0.036536] pci 0000:00:0d.0: reg 0x10: [mem 0xf4000000-0xf407ffff] [ 0.037842] pci 0000:00:10.0: [106b:0010] type 00 class 0xff0000 [ 0.037954] pci 0000:00:10.0: reg 0x10: [mem 0xf3000000-0xf307ffff] [ 0.039498] pci 0000:00:11.0: [1002:4c47] type 00 class 0x030000 [ 0.039606] pci 0000:00:11.0: reg 0x10: [mem 0x82000000-0x82ffffff] [ 0.039666] pci 0000:00:11.0: reg 0x14: [io 0x0400-0x04ff] [ 0.039722] pci 0000:00:11.0: reg 0x18: [mem 0x82fff000-0x82ffffff] [ 0.039806] pci 0000:00:11.0: reg 0x30: [mem 0xfd000000-0xfd01ffff pref] [ 0.041140] pci 0000:00:13.0: [104c:ac15] type 02 class 0x060700 [ 0.041243] pci 0000:00:13.0: reg 0x10: [mem 0x81803000-0x81803fff] [ 0.041923] pci 0000:00:13.1: [104c:ac15] type 02 class 0x060700 [ 0.042017] pci 0000:00:13.1: reg 0x10: [mem 0x81802000-0x81802fff] [ 0.043740] pci_bus 0000:01: extended config space not accessible [ 0.044779] pci_bus 0000:01: busn_res: [bus 01-ff] end is updated to 04 [ 0.044916] pci_bus 0000:05: extended config space not accessible [ 0.045342] pci_bus 0000:05: busn_res: [bus 05-ff] end is updated to 08 [ 0.045427] pci_bus 0000:00: busn_res: [bus 00-ff] end is updated to 08 [ 0.045951] PCI: Cannot allocate resource region 2 of device 0000:00:11.0, will remap [ 0.046051] PCI 0000:00 Cannot reserve Legacy IO [io 0x0000-0x0fff] [ 0.046241] pci 0000:00:13.0: BAR 9: assigned [mem 0x84000000-0x87ffffff pref] [ 0.046312] pci 0000:00:13.0: BAR 10: assigned [mem 0x88000000-0x8bffffff] [ 0.046366] pci 0000:00:13.1: BAR 9: assigned [mem 0x8c000000-0x8fffffff pref] [ 0.046427] pci 0000:00:13.1: BAR 10: assigned [mem 0x90000000-0x93ffffff] [ 0.046480] pci 0000:00:11.0: BAR 6: assigned [mem 0xfd000000-0xfd01ffff pref] [ 0.046545] pci 0000:00:11.0: BAR 2: assigned [mem 0xfd020000-0xfd020fff] [ 0.046602] pci 0000:00:13.0: BAR 7: assigned [io 0x1000-0x10ff] [ 0.046653] pci 0000:00:13.0: BAR 8: assigned [io 0x1100-0x11ff] [ 0.046701] pci 0000:00:13.1: BAR 7: assigned [io 0x1200-0x12ff] [ 0.046750] pci 0000:00:13.1: BAR 8: assigned [io 0x1300-0x13ff] [ 0.046816] pci 0000:00:13.0: CardBus bridge to [bus 01-04] [ 0.046860] pci 0000:00:13.0: bridge window [io 0x1000-0x10ff] [ 0.046908] pci 0000:00:13.0: bridge window [io 0x1100-0x11ff] [ 0.046955] pci 0000:00:13.0: bridge window [mem 0x84000000-0x87ffffff pref] [ 0.047013] pci 0000:00:13.0: bridge window [mem 0x88000000-0x8bffffff] [ 0.047064] pci 0000:00:13.1: CardBus bridge to [bus 05-08] [ 0.047106] pci 0000:00:13.1: bridge window [io 0x1200-0x12ff] [ 0.047153] pci 0000:00:13.1: bridge window [io 0x1300-0x13ff] [ 0.047199] pci 0000:00:13.1: bridge window [mem 0x8c000000-0x8fffffff pref] [ 0.047257] pci 0000:00:13.1: bridge window [mem 0x90000000-0x93ffffff] [ 0.047310] pci_bus 0000:00: resource 4 [io 0x0000-0x7fffff] [ 0.047356] pci_bus 0000:00: resource 5 [mem 0xfd000000-0xfdffffff] [ 0.047403] pci_bus 0000:00: resource 6 [mem 0x80000000-0xfcffffff] [ 0.047451] pci_bus 0000:01: resource 0 [io 0x1000-0x10ff] [ 0.047496] pci_bus 0000:01: resource 1 [io 0x1100-0x11ff] [ 0.047541] pci_bus 0000:01: resource 2 [mem 0x84000000-0x87ffffff pref] [ 0.047589] pci_bus 0000:01: resource 3 [mem 0x88000000-0x8bffffff] [ 0.047637] pci_bus 0000:05: resource 0 [io 0x1200-0x12ff] [ 0.047682] pci_bus 0000:05: resource 1 [io 0x1300-0x13ff] [ 0.047726] pci_bus 0000:05: resource 2 [mem 0x8c000000-0x8fffffff pref] [ 0.047774] pci_bus 0000:05: resource 3 [mem 0x90000000-0x93ffffff] [ 0.157887] pci 0000:00:11.0: vgaarb: VGA device added: decodes=io+mem,owns=mem,locks=none [ 0.158096] pci 0000:00:11.0: vgaarb: bridge control possible [ 0.158138] pci 0000:00:11.0: vgaarb: setting as boot device (VGA legacy resources not available) [ 0.158195] vgaarb: loaded [ 0.158978] SCSI subsystem initialized [ 0.160793] libata version 3.00 loaded. [ 0.162231] usbcore: registered new interface driver usbfs [ 0.162627] usbcore: registered new interface driver hub [ 0.162817] usbcore: registered new device driver usb [ 0.174905] clocksource: Switched to clocksource timebase [ 0.237350] NET: Registered PF_INET protocol family [ 0.238033] IP idents hash table entries: 8192 (order: 4, 65536 bytes, linear) [ 0.241929] tcp_listen_portaddr_hash hash table entries: 512 (order: 0, 6144 bytes, linear) [ 0.242105] TCP established hash table entries: 4096 (order: 2, 16384 bytes, linear) [ 0.242360] TCP bind hash table entries: 4096 (order: 3, 32768 bytes, linear) [ 0.242784] TCP: Hash tables configured (established 4096 bind 4096) [ 0.243164] UDP hash table entries: 256 (order: 1, 8192 bytes, linear) [ 0.243347] UDP-Lite hash table entries: 256 (order: 1, 8192 bytes, linear) [ 0.243824] NET: Registered PF_UNIX/PF_LOCAL protocol family [ 0.245153] RPC: Registered named UNIX socket transport module. [ 0.245217] RPC: Registered udp transport module. [ 0.245249] RPC: Registered tcp transport module. [ 0.245281] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 0.245506] PCI: CLS 32 bytes, default 32 [ 0.246227] Thermal assist unit using workqueue, shrink_timer: 2000 ms [ 0.252618] workingset: timestamp_bits=30 max_order=17 bucket_order=0 [ 0.253825] squashfs: version 4.0 (2009/01/31) Phillip Lougher [ 0.257591] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253) [ 0.257682] io scheduler mq-deadline registered [ 0.258395] pci 0000:00:11.0: enabling device (0086 -> 0087) [ 0.258498] Using unsupported 1024x768 (null) at 82801000, depth=32, pitch=4096 [ 0.381405] Console: switching to colour frame buffer device 128x48 [ 0.503544] fb0: Open Firmware frame buffer device on /pci/ATY,264LT-G [ 0.505750] pmac_zilog: 0.6 (Benjamin Herrenschmidt ) [ 0.508664] Non-volatile memory driver v1.3 [ 0.520215] brd: module loaded [ 0.547655] loop: module loaded [ 0.548767] MacIO PCI driver attached to Gatwick chipset [ 0.551460] MacIO PCI driver attached to Heathrow chipset [ 0.561630] swim3 0.00015000:floppy: [fd0] SWIM3 floppy controller in media bay [ 0.568173] 0.00013020:ch-a: ttyS0 at MMIO 0xf3013020 (irq = 16, base_baud = 230400) is a Z85c30 ESCC - Serial port [ 0.573859] 0.00013000:ch-b: ttyS1 at MMIO 0xf3013000 (irq = 17, base_baud = 230400) is a Z85c30 ESCC - Infrared port [ 0.580315] macio: fixed media-bay irq on gatwick [ 0.583976] macio: fixed left floppy irqs [ 0.585650] swim3 1.00015000:floppy: [fd1] Couldn't request interrupt [ 0.588069] swim3: probe of 1.00015000:floppy failed with error -16 [ 0.589879] macio: fixed left ide irqs [ 0.591363] macio: fixed SCC irqs on gatwick [ 0.592791] 1.00013020:ch-a: ttyS2 at MMIO 0xf4013020 (irq = 79, base_baud = 230400) is a Z85c30 ESCC - Internal modem [ 0.598130] mediabay0: Registered Heathrow media-bay [ 0.816991] mediabay1: Registered Heathrow media-bay [ 0.818206] mediabay0: Bay contains an ATA device [ 1.038085] PMU Backlight initialized (pmubl) [ 1.041368] mesh: configured for synchronous 5 MB/s [ 1.266499] mesh: performing initial bus reset... [ 3.199447] random: fast init done [ 3.298428] adb device [2]: 2 0xC3 [ 3.354766] adb device [3]: 3 0x1 [ 3.407954] adb device [7]: 7 0x1F [ 3.470502] ADB keyboard at 2 has handler 0xC3 [ 3.518878] Detected ADB keyboard, type ANSI. [ 3.567361] input: ADB keyboard as /devices/virtual/input/input0 [ 3.616623] input: ADB Powerbook buttons as /devices/virtual/input/input1 [ 3.731454] ADB mouse (trackpad) at 3 has handler 0x4 [ 3.779957] input: ADB mouse as /devices/virtual/input/input2 [ 5.366526] scsi host0: MESH [ 8.726396] pata-macio 0.00020000:ata0: Activating pata-macio chipset Heathrow ATA, Apple bus ID 0 [ 8.781358] scsi host1: pata_macio [ 8.833148] ata1: PATA max MWDMA2 irq 30 [ 9.926394] pata-macio 0.00021000:ata1: Activating pata-macio chipset Heathrow ATA, Apple bus ID 1 [ 9.982160] scsi host2: pata_macio [ 10.034353] ata2: PATA max MWDMA2 irq 36 [ 10.116390] pata-macio 1.00021000:ata4: Activating pata-macio chipset Heathrow ATA, Apple bus ID 4 [ 10.168592] genirq: Flags mismatch irq 36. 00000000 (pata-macio[1.00021000:ata4]) vs. 00000000 (pata-macio[0.00021000:ata1]) [ 10.222068] pata-macio: probe of 1.00021000:ata4 failed with error -16 [ 10.608318] ata1.00: ATA-8: WDC WD1600BEVE-00A0HT0, 11.01A11, max UDMA/100 [ 10.662528] ata1.00: 312581808 sectors, multi 8: LBA48 [ 10.716674] ata2.00: ATA-6: ST9160821A, 3.ALD, max UDMA/100 [ 10.769899] ata2.00: 312581808 sectors, multi 0: LBA48 [ 10.826852] eth0: BMAC at 00:05:02:f5:57:58 [ 10.932578] scsi 1:0:0:0: Direct-Access ATA WDC WD1600BEVE-0 1A11 PQ: 0 ANSI: 5 [ 10.988620] sd 1:0:0:0: [sda] 312581808 512-byte logical blocks: (160 GB/149 GiB) [ 11.042227] sd 1:0:0:0: Attached scsi generic sg0 type 0 [ 11.097669] sd 1:0:0:0: [sda] Write Protect is off [ 11.150509] sd 1:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 11.206875] scsi 2:0:0:0: Direct-Access ATA ST9160821A D PQ: 0 ANSI: 5 [ 11.269674] aoe: AoE v85 initialised. [ 11.321580] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 11.377508] sd 2:0:0:0: [sdb] 312581808 512-byte logical blocks: (160 GB/149 GiB) [ 11.431432] sd 2:0:0:0: Attached scsi generic sg1 type 0 [ 11.486179] sd 2:0:0:0: [sdb] Write Protect is off [ 11.538598] sd 2:0:0:0: [sdb] Mode Sense: 00 3a 00 00 [ 11.590563] sd 1:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 11.644399] ehci-pci: EHCI PCI platform driver [ 11.701603] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 11.755880] sda: [mac] sda1 sda2 sda3 sda4 sda5 sda6 sda7 sda8 sda9 sda10 sda11 sda12 sda13 sda14 sda15 [ 11.809666] sd 2:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 11.866204] ohci-pci: OHCI PCI platform driver [ 11.933042] sd 1:0:0:0: [sda] Attached SCSI disk [ 11.994515] usbcore: registered new interface driver uas [ 12.050805] sdb: [mac] sdb1 sdb2 sdb3 sdb4 sdb5 sdb6 sdb7 sdb8 sdb9 sdb10 sdb11 sdb12 sdb13 sdb14 [ 12.109970] usbcore: registered new interface driver usb-storage [ 12.176715] sd 2:0:0:0: [sdb] Attached SCSI disk [ 12.242703] mousedev: PS/2 mouse device common for all mice [ 12.307555] rtc-generic rtc-generic: registered as rtc0 [ 12.368896] i2c /dev entries driver [ 12.429731] PowerMac i2c bus pmu 2 registered [ 12.491051] PowerMac i2c bus pmu 1 registered [ 12.557142] usbcore: registered new interface driver usbhid [ 12.615436] usbhid: USB HID core driver [ 12.678048] NET: Registered PF_PACKET protocol family [ 12.736476] drmem: No dynamic reconfiguration memory found [ 12.809444] EXT4-fs (sdb12): mounting ext3 file system using the ext4 subsystem [ 12.887972] EXT4-fs (sdb12): INFO: recovery required on readonly filesystem [ 12.945058] EXT4-fs (sdb12): write access will be enabled during recovery [ 13.246194] EXT4-fs (sdb12): recovery complete [ 13.345587] EXT4-fs (sdb12): mounted filesystem with ordered data mode. Opts: (null). Quota mode: disabled. [ 13.402880] VFS: Mounted root (ext3 filesystem) readonly on device 8:28. [ 13.470620] Freeing unused kernel image (initmem) memory: 1132K [ 13.528247] Kernel memory protection not selected by kernel config. [ 13.584308] Run /sbin/init as init process [ 13.638602] with arguments: [ 13.691954] /sbin/init [ 13.744579] earlyprintk [ 13.796699] with environment: [ 13.848516] HOME=/ [ 13.899994] TERM=linux [ 23.119423] random: crng init done [ 24.348217] phy registers: [ 24.348281] 0000 0000 0000 0000 0000 0000 0000 0000 [ 24.409357] 0000 0000 0000 0000 0000 0000 0000 0000 [ 24.469985] 0000 0000 0000 0000 0000 0000 0000 0000 [ 24.529579] 0000 0000 0000 0000 0000 0000 0000 0000 [ 32.431004] Adding 1048572k swap on /dev/sdb13. Priority:-2 extents:1 across:1048572k [ 32.715209] EXT4-fs (sdb12): re-mounted. Opts: (null). Quota mode: disabled. [ 33.524214] EXT4-fs (sdb12): re-mounted. Opts: errors=remount-ro. Quota mode: disabled. [ 37.748278] EXT4-fs (sdb14): mounting ext3 file system using the ext4 subsystem [ 38.176853] EXT4-fs (sdb14): mounted filesystem with ordered data mode. Opts: (null). Quota mode: disabled. [ 63.681181] phy registers: [ 63.681247] 0000 0000 0000 0000 0000 0000 0000 0000 [ 63.691738] 0000 0000 0000 0000 0000 0000 0000 0000 [ 63.702180] 0000 0000 0000 0000 0000 0000 0000 0000 [ 63.712619] 0000 0000 0000 0000 0000 0000 0000 0000 [ 91.150956] xfce4-session[1792]: segfault (11) at 404cd4fc nip a6aed794 lr a6aed930 code 1 in libc-2.31.so[a6aa9000+1ce000] [ 91.151194] xfce4-session[1792]: code: 2c170000 41820050 83f70004 3bb70008 57ff2036 3bfffff8 7ff7fa14 7c1df840 [ 91.151233] xfce4-session[1792]: code: 41810028 60000000 60000000 41920150 <813f000c> 7c09d800 41820144 3bfffff0 [ 115.700631] xfwm4[1978]: segfault (11) at 766d3243 nip a6c4af84 lr a6e07724 code 1 in libc-2.31.so[a6c0b000+1ce000] [ 115.700948] xfwm4[1978]: code: 60420000 8121000c 5069063e 9121000c 60420000 c8010008 fdfe058e 38210010 [ 115.700995] xfwm4[1978]: code: 4e800020 7c250b78 80c28ff4 7cc52a78 <90a30000> 7c0802a6 91c3000c d9c30058