| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-Id: <20210801160921.233081-1-romain.perier@gmail.com>
Date: Sun, 1 Aug 2021 18:09:18 +0200
From: Romain Perier <romain.perier@...il.com>
To: Alessandro Zummo <a.zummo@...ertech.it>,
Alexandre Belloni <alexandre.belloni@...tlin.com>,
Daniel Palmer <daniel@...f.com>,
Rob Herring <robh+dt@...nel.org>
Cc: linux-rtc@...r.kernel.org, devicetree@...r.kernel.org,
linux-kernel@...r.kernel.org, linux-arm-kernel@...ts.infradead.org
Subject: [PATCH v2 0/3] Add RTC for MStar SoCs
This patches series adds a new driver for the RTC found in the Mstar
MSC313e SoCs and newer. It adds a basic rtc driver, the corresponding
devicetree bindings and its documentation.
The rtctest (from selftests) has been passed on this driver, with the
following output:
$ rtctest
TAP version 13
1..7
# Starting 7 tests from 2 test cases.
# RUN rtc.date_read ...
# rtctest.c:47:date_read:Current RTC date/time is 01/01/1970 00:02:03.
# OK rtc.date_read
ok 1 rtc.date_read
# RUN rtc.uie_read ...
# OK rtc.uie_read
ok 2 rtc.uie_read
# RUN rtc.uie_select ...
# OK rtc.uie_select
ok 3 rtc.uie_select
# RUN rtc.alarm_alm_set ...
# rtctest.c:136:alarm_alm_set:Alarm time now set to 00:02:12.
# rtctest.c:156:alarm_alm_set:data: 1a0
# OK rtc.alarm_alm_set
ok 4 rtc.alarm_alm_set
# RUN rtc.alarm_wkalm_set ...
# rtctest.c:192:alarm_wkalm_set:Alarm time now set to 01/01/1970 00:02:15.
# OK rtc.alarm_wkalm_set
ok 5 rtc.alarm_wkalm_set
# RUN rtc.alarm_alm_set_minute ...
# rtctest.c:238:alarm_alm_set_minute:Alarm time now set to 00:03:00.
# rtctest.c:258:alarm_alm_set_minute:data: 1a0
# OK rtc.alarm_alm_set_minute
ok 6 [ 180.545015] random: fast init done
rtc.alarm_alm_set_minute
# RUN rtc.alarm_wkalm_set_minute ...
# rtctest.c:294:alarm_wkalm_set_minute:Alarm time now set to 01/01/1970 00:04:00.
# OK rtc.alarm_wkalm_set_minute
ok 7 rtc.alarm_wkalm_set_minute
# PASSED: 7 / 7 tests passed.
# Totals: pass:7 fail:0 xfail:0 xpass:0 skip:0 error:0
Changes since v1:
- Fixed the DT bindings documentation and fixed dt_binding_check (an
include was missing)
- Added || COMPILE_TEST to kconfig
- Removed rtc_valid_tm from msc313_rtc_read_time()
- Removed the last write of the msc313_rtc_set_time() function (not
required) and improved comments
- Replaced the relaxed io by normal io in msc313_rtc_interrupt()
- Added checks to be sure that the alarm fired in msc313_rtc_interrupt()
- Removed msc313_rtc_remove() (replaced by devm_add_action_or_reset)
- Removed unnecessary software reset of the IP in the probe function
(the soft reset is never executed, it is a mistake from the initial
refactoring)
- Switched to devm_rtc_allocate_device() and devm_rtc_register_device(),
and dropped the error message related to the rtc device allocation
- Added an RTC range by setting .range_min and .range_max
- Added the "start-year" property to the DT bindings documentation
Daniel Palmer (1):
rtc: Add support for the MSTAR MSC313 RTC
Romain Perier (2):
dt-bindings: rtc: Add Mstar MSC313e RTC devicetree bindings
documentation
ARM: dts: mstar: Add rtc device node
.../bindings/rtc/mstar,msc313-rtc.yaml | 49 ++++
MAINTAINERS | 1 +
arch/arm/boot/dts/mstar-v7.dtsi | 7 +
drivers/rtc/Kconfig | 10 +
drivers/rtc/Makefile | 1 +
drivers/rtc/rtc-msc313.c | 246 ++++++++++++++++++
6 files changed, 314 insertions(+)
create mode 100644 Documentation/devicetree/bindings/rtc/mstar,msc313-rtc.yaml
create mode 100644 drivers/rtc/rtc-msc313.c
--
2.30.2
Powered by blists - more mailing lists