[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-Id: <20210802211947.19715-11-digetx@gmail.com>
Date: Tue, 3 Aug 2021 00:19:42 +0300
From: Dmitry Osipenko <digetx@...il.com>
To: Thierry Reding <thierry.reding@...il.com>,
Jonathan Hunter <jonathanh@...dia.com>,
Matt Merhar <mattmerhar@...tonmail.com>,
Peter Geis <pgwipeout@...il.com>
Cc: Daniel Lezcano <daniel.lezcano@...aro.org>,
linux-kernel@...r.kernel.org, linux-tegra@...r.kernel.org
Subject: [PATCH v2 10/15] ARM: tegra: jetson-tk1: Correct interrupt trigger type of temperature sensor
The LM90 temperature sensor should use edge-triggered interrupt because
LM90 hardware doesn't deassert interrupt line until temperature is back
to normal state, which results in interrupt storm. Correct the interrupt
trigger type.
Signed-off-by: Dmitry Osipenko <digetx@...il.com>
---
arch/arm/boot/dts/tegra124-jetson-tk1.dts | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/arch/arm/boot/dts/tegra124-jetson-tk1.dts b/arch/arm/boot/dts/tegra124-jetson-tk1.dts
index 414cd1cafa7f..35ab296408e1 100644
--- a/arch/arm/boot/dts/tegra124-jetson-tk1.dts
+++ b/arch/arm/boot/dts/tegra124-jetson-tk1.dts
@@ -1427,7 +1427,7 @@ temperature-sensor@4c {
compatible = "ti,tmp451";
reg = <0x4c>;
interrupt-parent = <&gpio>;
- interrupts = <TEGRA_GPIO(I, 6) IRQ_TYPE_LEVEL_LOW>;
+ interrupts = <TEGRA_GPIO(I, 6) IRQ_TYPE_EDGE_FALLING>;
};
eeprom@56 {
--
2.32.0
Powered by blists - more mailing lists