| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Date: Mon, 2 Aug 2021 19:26:00 +1000
From: Alistair Francis <alistair23@...il.com>
To: Lee Jones <lee.jones@...aro.org>
Cc: Alistair Francis <alistair@...stair23.me>,
Rob Herring <robh+dt@...nel.org>, lgirdwood@...il.com,
Mark Brown <broonie@...nel.org>,
dl-linux-imx <linux-imx@....com>,
Sascha Hauer <kernel@...gutronix.de>,
devicetree <devicetree@...r.kernel.org>,
Linux Kernel Mailing List <linux-kernel@...r.kernel.org>
Subject: Re: [PATCH v7 1/6] mfd: sy7636a: Initial commit
On Wed, Jul 21, 2021 at 12:53 AM Lee Jones <lee.jones@...aro.org> wrote:
>
> On Thu, 08 Jul 2021, Alistair Francis wrote:
>
> > Initial support for the Silergy SY7636A Power Management chip.
> >
> > Signed-off-by: Alistair Francis <alistair@...stair23.me>
> > ---
> > drivers/mfd/Kconfig | 9 +++++
> > drivers/mfd/Makefile | 1 +
> > drivers/mfd/sy7636a.c | 81 +++++++++++++++++++++++++++++++++++++
> > include/linux/mfd/sy7636a.h | 47 +++++++++++++++++++++
> > 4 files changed, 138 insertions(+)
> > create mode 100644 drivers/mfd/sy7636a.c
> > create mode 100644 include/linux/mfd/sy7636a.h
> >
> > diff --git a/drivers/mfd/Kconfig b/drivers/mfd/Kconfig
> > index 6a3fd2d75f96..7b59aa0fd3f2 100644
> > --- a/drivers/mfd/Kconfig
> > +++ b/drivers/mfd/Kconfig
> > @@ -1352,6 +1352,15 @@ config MFD_SYSCON
> > Select this option to enable accessing system control registers
> > via regmap.
> >
> > +config MFD_SY7636A
> > + tristate "Silergy SY7636A Power Management chip"
>
> s/chip/IC/
>
> > + select MFD_CORE
> > + select REGMAP_I2C
> > + depends on I2C
> > + help
> > + Select this option to enable support for the Silergy SY7636A
> > + Power Management chip.
>
> As above.
>
> > config MFD_DAVINCI_VOICECODEC
> > tristate
> > select MFD_CORE
> > diff --git a/drivers/mfd/Makefile b/drivers/mfd/Makefile
> > index 8116c19d5fd4..cbe581e87fa9 100644
> > --- a/drivers/mfd/Makefile
> > +++ b/drivers/mfd/Makefile
> > @@ -266,6 +266,7 @@ obj-$(CONFIG_MFD_KHADAS_MCU) += khadas-mcu.o
> > obj-$(CONFIG_MFD_ACER_A500_EC) += acer-ec-a500.o
> > obj-$(CONFIG_MFD_QCOM_PM8008) += qcom-pm8008.o
> >
> > +obj-$(CONFIG_MFD_SY7636A) += sy7636a.o
> > obj-$(CONFIG_SGI_MFD_IOC3) += ioc3.o
> > obj-$(CONFIG_MFD_SIMPLE_MFD_I2C) += simple-mfd-i2c.o
> > obj-$(CONFIG_MFD_INTEL_M10_BMC) += intel-m10-bmc.o
> > diff --git a/drivers/mfd/sy7636a.c b/drivers/mfd/sy7636a.c
> > new file mode 100644
> > index 000000000000..345892e11221
> > --- /dev/null
> > +++ b/drivers/mfd/sy7636a.c
> > @@ -0,0 +1,81 @@
> > +// SPDX-License-Identifier: GPL-2.0+
> > +//
> > +// MFD parent driver for SY7636A chip
> > +//
> > +// Copyright (C) 2021 reMarkable AS - http://www.remarkable.com/
> > +//
> > +// Authors: Lars Ivar Miljeteig <lars.ivar.miljeteig@...arkable.com>
> > +// Alistair Francis <alistair@...stair23.me>
>
> Only C++ comments for the SPDX please.
>
> > +// Based on the lp87565 driver by Keerthy <j-keerthy@...com>
> > +
> > +#include <linux/interrupt.h>
> > +#include <linux/mfd/core.h>
> > +#include <linux/module.h>
> > +#include <linux/of_device.h>
> > +
> > +#include <linux/mfd/sy7636a.h>
> > +
> > +static const struct regmap_config sy7636a_regmap_config = {
> > + .reg_bits = 8,
> > + .val_bits = 8,
> > +};
> > +
> > +static const struct mfd_cell sy7636a_cells[] = {
> > + { .name = "sy7636a-regulator", },
> > + { .name = "sy7636a-temperature", },
> > + { .name = "sy7636a-thermal", },
> > +};
>
> If you put these in the Device Tree, you can use "simple-mfd-i2c"
>
> > +static const struct of_device_id of_sy7636a_match_table[] = {
> > + { .compatible = "silergy,sy7636a", },
> > + {}
> > +};
> > +MODULE_DEVICE_TABLE(of, of_sy7636a_match_table);
>
> Place this near the i2c_device_id table please.
>
> > +static int sy7636a_probe(struct i2c_client *client,
> > + const struct i2c_device_id *ids)
> > +{
> > + struct sy7636a *sy7636a;
>
> Please call this ddata.
>
> > + int ret;
> > +
> > + sy7636a = devm_kzalloc(&client->dev, sizeof(*sy7636a), GFP_KERNEL);
> > + if (!sy7636a)
> > + return -ENOMEM;
> > +
> > + sy7636a->dev = &client->dev;
>
> What are you using 'dev' for?
>
> You can normally just use 'dev->parent' from the child device.
I didn't realise that, I have removed `dev`.
>
> > + sy7636a->regmap = devm_regmap_init_i2c(client, &sy7636a_regmap_config);
> > + if (IS_ERR(sy7636a->regmap)) {
> > + ret = PTR_ERR(sy7636a->regmap);
> > + dev_err(sy7636a->dev,
> > + "Failed to initialize register map: %d\n", ret);
> > + return ret;
> > + }
> > +
> > + i2c_set_clientdata(client, sy7636a);
> > +
> > + return devm_mfd_add_devices(sy7636a->dev, PLATFORM_DEVID_AUTO,
> > + sy7636a_cells, ARRAY_SIZE(sy7636a_cells),
> > + NULL, 0, NULL);
> > +}
> > +
> > +static const struct i2c_device_id sy7636a_id_table[] = {
> > + { "sy7636a", 0 },
> > + { },
> > +};
> > +MODULE_DEVICE_TABLE(i2c, sy7636a_id_table);
>
> Use probe_new below, then you can omit this table.
>
> > +static struct i2c_driver sy7636a_driver = {
> > + .driver = {
> > + .name = "sy7636a",
> > + .of_match_table = of_sy7636a_match_table,
> > + },
> > + .probe = sy7636a_probe,
> > + .id_table = sy7636a_id_table,
> > +};
> > +module_i2c_driver(sy7636a_driver);
> > +
> > +MODULE_AUTHOR("Lars Ivar Miljeteig <lars.ivar.miljeteig@...arkable.com>");
> > +MODULE_DESCRIPTION("Silergy SY7636A Multi-Function Device Driver");
> > +MODULE_LICENSE("GPL v2");
> > diff --git a/include/linux/mfd/sy7636a.h b/include/linux/mfd/sy7636a.h
> > new file mode 100644
> > index 000000000000..b6845a3572b8
> > --- /dev/null
> > +++ b/include/linux/mfd/sy7636a.h
> > @@ -0,0 +1,47 @@
> > +/* SPDX-License-Identifier: GPL-2.0-only */
> > +/*
> > + * Functions to access SY3686A power management chip.
> > + *
> > + * Copyright (C) 2021 reMarkable AS - http://www.remarkable.com/
> > + */
> > +
> > +#ifndef __MFD_SY7636A_H
> > +#define __MFD_SY7636A_H
> > +
> > +#include <linux/i2c.h>
> > +#include <linux/regmap.h>
> > +#include <linux/regulator/driver.h>
> > +#include <linux/regulator/machine.h>
> > +
> > +#define SY7636A_REG_OPERATION_MODE_CRL 0x00
> > +#define SY7636A_OPERATION_MODE_CRL_VCOMCTL BIT(6)
> > +#define SY7636A_OPERATION_MODE_CRL_ONOFF BIT(7)
> > +#define SY7636A_REG_VCOM_ADJUST_CTRL_L 0x01
> > +#define SY7636A_REG_VCOM_ADJUST_CTRL_H 0x02
> > +#define SY7636A_REG_VCOM_ADJUST_CTRL_MASK 0x01ff
> > +#define SY7636A_REG_VLDO_VOLTAGE_ADJULST_CTRL 0x03
> > +#define SY7636A_REG_POWER_ON_DELAY_TIME 0x06
> > +#define SY7636A_REG_FAULT_FLAG 0x07
> > +#define SY7636A_FAULT_FLAG_PG BIT(0)
> > +#define SY7636A_REG_TERMISTOR_READOUT 0x08
> > +
> > +#define SY7636A_REG_MAX 0x08
> > +
> > +#define VCOM_MIN 0
> > +#define VCOM_MAX 5000
> > +
> > +#define VCOM_ADJUST_CTRL_MASK 0x1ff
> > +// Used to shift the high byte
> > +#define VCOM_ADJUST_CTRL_SHIFT 8
> > +// Used to scale from VCOM_ADJUST_CTRL to mv
> > +#define VCOM_ADJUST_CTRL_SCAL 10000
> > +
> > +#define FAULT_FLAG_SHIFT 1
> > +
> > +struct sy7636a {
> > + struct device *dev;
> > + struct regmap *regmap;
> > + struct gpio_desc *pgood_gpio;
>
> This looks unused?
It is used in the syy636a-regulator
Alistair
>
> > +};
> > +
> > +#endif /* __LINUX_MFD_SY7636A_H */
>
> --
> Lee Jones [李琼斯]
> Senior Technical Lead - Developer Services
> Linaro.org │ Open source software for Arm SoCs
> Follow Linaro: Facebook | Twitter | Blog
Powered by blists - more mailing lists