| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-Id: <20210803131024.40280-11-cristian.marussi@arm.com>
Date: Tue, 3 Aug 2021 14:10:19 +0100
From: Cristian Marussi <cristian.marussi@....com>
To: linux-kernel@...r.kernel.org, linux-arm-kernel@...ts.infradead.org,
virtualization@...ts.linux-foundation.org,
virtio-dev@...ts.oasis-open.org
Cc: sudeep.holla@....com, james.quinlan@...adcom.com,
Jonathan.Cameron@...wei.com, f.fainelli@...il.com,
etienne.carriere@...aro.org, vincent.guittot@...aro.org,
souvik.chakravarty@....com, cristian.marussi@....com,
igor.skalkin@...nsynergy.com, peter.hilber@...nsynergy.com,
alex.bennee@...aro.org, jean-philippe@...aro.org,
mikhail.golubev@...nsynergy.com, anton.yakovlev@...nsynergy.com,
Vasyl.Vavrychuk@...nsynergy.com,
Andriy.Tryshnivskyy@...nsynergy.com
Subject: [PATCH v7 10/15] firmware: arm_scmi: Add method to override max message number
From: Igor Skalkin <igor.skalkin@...nsynergy.com>
The maximum number of simultaneously pending messages is a transport
specific quantity that is usually described statically in struct scmi_desc.
Some transports, though, can calculate such number only at run-time after
some initial transport specific setup and probing is completed; moreover
the resulting max message numbers could also be different between rx and
tx channels.
Add an optional get_max_msg() operation so that a transport can report more
accurate max message numbers for each channel type.
The value in scmi_desc.max_msg is still used as default when transport does
not provide any get_max_msg() method.
Signed-off-by: Igor Skalkin <igor.skalkin@...nsynergy.com>
[ Peter: Adapted patch for submission to upstream. ]
Co-developed-by: Peter Hilber <peter.hilber@...nsynergy.com>
Signed-off-by: Peter Hilber <peter.hilber@...nsynergy.com>
[ Cristian: refactored how get_max_msg() is used to minimize core changes ]
Co-developed-by: Cristian Marussi <cristian.marussi@....com>
Signed-off-by: Cristian Marussi <cristian.marussi@....com>
---
v4 --> v5
- refactored usage of get_max_msg()
---
drivers/firmware/arm_scmi/common.h | 9 +++++--
drivers/firmware/arm_scmi/driver.c | 40 +++++++++++++++++++++++++++---
2 files changed, 43 insertions(+), 6 deletions(-)
diff --git a/drivers/firmware/arm_scmi/common.h b/drivers/firmware/arm_scmi/common.h
index 204cde53a9a7..6320345865e8 100644
--- a/drivers/firmware/arm_scmi/common.h
+++ b/drivers/firmware/arm_scmi/common.h
@@ -351,6 +351,9 @@ struct scmi_chan_info {
* @chan_available: Callback to check if channel is available or not
* @chan_setup: Callback to allocate and setup a channel
* @chan_free: Callback to free a channel
+ * @get_max_msg: Optional callback to provide max_msg dynamically
+ * Returns the maximum number of messages for the channel type
+ * (tx or rx) that can be pending simultaneously in the system
* @send_message: Callback to send a message
* @mark_txdone: Callback to mark tx as done
* @fetch_response: Callback to fetch response
@@ -363,6 +366,7 @@ struct scmi_transport_ops {
int (*chan_setup)(struct scmi_chan_info *cinfo, struct device *dev,
bool tx);
int (*chan_free)(int id, void *p, void *data);
+ unsigned int (*get_max_msg)(struct scmi_chan_info *base_cinfo);
int (*send_message)(struct scmi_chan_info *cinfo,
struct scmi_xfer *xfer);
void (*mark_txdone)(struct scmi_chan_info *cinfo, int ret);
@@ -390,8 +394,9 @@ struct scmi_device *scmi_child_dev_find(struct device *parent,
* de-initialization, so after SCMI core removal.
* @ops: Pointer to the transport specific ops structure
* @max_rx_timeout_ms: Timeout for communication with SoC (in Milliseconds)
- * @max_msg: Maximum number of messages that can be pending
- * simultaneously in the system
+ * @max_msg: Maximum number of messages for a channel type (tx or rx) that can
+ * be pending simultaneously in the system. May be overridden by the
+ * get_max_msg op.
* @max_msg_size: Maximum size of data per message that can be handled.
*/
struct scmi_desc {
diff --git a/drivers/firmware/arm_scmi/driver.c b/drivers/firmware/arm_scmi/driver.c
index d20e6760b488..a907f3fe4c08 100644
--- a/drivers/firmware/arm_scmi/driver.c
+++ b/drivers/firmware/arm_scmi/driver.c
@@ -72,6 +72,7 @@ struct scmi_requested_dev {
* Index of this bitmap table is also used for message
* sequence identifier.
* @xfer_lock: Protection for message allocation
+ * @max_msg: Maximum number of messages that can be pending
* @free_xfers: A free list for available to use xfers. It is initialized with
* a number of xfers equal to the maximum allowed in-flight
* messages.
@@ -81,6 +82,7 @@ struct scmi_requested_dev {
struct scmi_xfers_info {
unsigned long *xfer_alloc_table;
spinlock_t xfer_lock;
+ int max_msg;
struct hlist_head free_xfers;
DECLARE_HASHTABLE(pending_xfers, SCMI_PENDING_XFERS_HT_ORDER_SZ);
};
@@ -1373,10 +1375,10 @@ static int __scmi_xfer_info_init(struct scmi_info *sinfo,
const struct scmi_desc *desc = sinfo->desc;
/* Pre-allocated messages, no more than what hdr.seq can support */
- if (WARN_ON(!desc->max_msg || desc->max_msg > MSG_TOKEN_MAX)) {
+ if (WARN_ON(!info->max_msg || info->max_msg > MSG_TOKEN_MAX)) {
dev_err(dev,
"Invalid maximum messages %d, not in range [1 - %lu]\n",
- desc->max_msg, MSG_TOKEN_MAX);
+ info->max_msg, MSG_TOKEN_MAX);
return -EINVAL;
}
@@ -1394,7 +1396,7 @@ static int __scmi_xfer_info_init(struct scmi_info *sinfo,
* attach all of them to the free list
*/
INIT_HLIST_HEAD(&info->free_xfers);
- for (i = 0; i < desc->max_msg; i++) {
+ for (i = 0; i < info->max_msg; i++) {
xfer = devm_kzalloc(dev, sizeof(*xfer), GFP_KERNEL);
if (!xfer)
return -ENOMEM;
@@ -1417,10 +1419,40 @@ static int __scmi_xfer_info_init(struct scmi_info *sinfo,
return 0;
}
+static int scmi_channels_max_msg_configure(struct scmi_info *sinfo)
+{
+ const struct scmi_desc *desc = sinfo->desc;
+
+ if (!desc->ops->get_max_msg) {
+ sinfo->tx_minfo.max_msg = desc->max_msg;
+ sinfo->rx_minfo.max_msg = desc->max_msg;
+ } else {
+ struct scmi_chan_info *base_cinfo;
+
+ base_cinfo = idr_find(&sinfo->tx_idr, SCMI_PROTOCOL_BASE);
+ if (!base_cinfo)
+ return -EINVAL;
+ sinfo->tx_minfo.max_msg = desc->ops->get_max_msg(base_cinfo);
+
+ /* RX channel is optional so can be skipped */
+ base_cinfo = idr_find(&sinfo->rx_idr, SCMI_PROTOCOL_BASE);
+ if (base_cinfo)
+ sinfo->rx_minfo.max_msg =
+ desc->ops->get_max_msg(base_cinfo);
+ }
+
+ return 0;
+}
+
static int scmi_xfer_info_init(struct scmi_info *sinfo)
{
- int ret = __scmi_xfer_info_init(sinfo, &sinfo->tx_minfo);
+ int ret;
+
+ ret = scmi_channels_max_msg_configure(sinfo);
+ if (ret)
+ return ret;
+ ret = __scmi_xfer_info_init(sinfo, &sinfo->tx_minfo);
if (!ret && idr_find(&sinfo->rx_idr, SCMI_PROTOCOL_BASE))
ret = __scmi_xfer_info_init(sinfo, &sinfo->rx_minfo);
--
2.17.1
Powered by blists - more mailing lists