[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <20210803144345.jmucndmrflnqlfo3@skbuf>
Date: Tue, 3 Aug 2021 17:43:45 +0300
From: Vladimir Oltean <olteanv@...il.com>
To: DENG Qingfang <dqfext@...il.com>
Cc: Sean Wang <sean.wang@...iatek.com>,
Landen Chao <Landen.Chao@...iatek.com>,
Andrew Lunn <andrew@...n.ch>,
Vivien Didelot <vivien.didelot@...il.com>,
Florian Fainelli <f.fainelli@...il.com>,
"David S. Miller" <davem@...emloft.net>,
Jakub Kicinski <kuba@...nel.org>,
Matthias Brugger <matthias.bgg@...il.com>,
netdev@...r.kernel.org, linux-arm-kernel@...ts.infradead.org,
linux-mediatek@...ts.infradead.org, linux-kernel@...r.kernel.org,
Eric Woudstra <ericwouds@...il.com>,
René van Dorst <opensource@...rst.com>,
Frank Wunderlich <frank-w@...lic-files.de>,
Ilya Lipnitskiy <ilya.lipnitskiy@...il.com>
Subject: Re: [PATCH net-next 3/4] net: dsa: mt7530: set STP state on filter
ID 1
On Tue, Aug 03, 2021 at 08:40:21PM +0800, DENG Qingfang wrote:
> As filter ID 1 is the only one used for bridges, set STP state on it.
>
> Signed-off-by: DENG Qingfang <dqfext@...il.com>
> ---
> RFC -> v1: only set FID 1's state
>
> drivers/net/dsa/mt7530.c | 3 ++-
> drivers/net/dsa/mt7530.h | 4 ++--
> 2 files changed, 4 insertions(+), 3 deletions(-)
>
> diff --git a/drivers/net/dsa/mt7530.c b/drivers/net/dsa/mt7530.c
> index 12f449a54833..8d84d7ddad38 100644
> --- a/drivers/net/dsa/mt7530.c
> +++ b/drivers/net/dsa/mt7530.c
> @@ -1147,7 +1147,8 @@ mt7530_stp_state_set(struct dsa_switch *ds, int port, u8 state)
> break;
> }
>
> - mt7530_rmw(priv, MT7530_SSP_P(port), FID_PST_MASK, stp_state);
> + mt7530_rmw(priv, MT7530_SSP_P(port), FID1_PST_MASK,
> + FID1_PST(stp_state));
> }
>
> static int
> diff --git a/drivers/net/dsa/mt7530.h b/drivers/net/dsa/mt7530.h
> index a308886fdebc..53b7bb1f5368 100644
> --- a/drivers/net/dsa/mt7530.h
> +++ b/drivers/net/dsa/mt7530.h
> @@ -181,8 +181,8 @@ enum mt7530_vlan_egress_attr {
>
> /* Register for port STP state control */
> #define MT7530_SSP_P(x) (0x2000 + ((x) * 0x100))
> -#define FID_PST(x) ((x) & 0x3)
> -#define FID_PST_MASK FID_PST(0x3)
> +#define FID1_PST(x) (((x) & 0x3) << 2)
> +#define FID1_PST_MASK FID1_PST(0x3)
Not a reason to resend, but I still would have expected a macro:
#define FID_PST(fid, state) ((state) & 0x3) << ((fid) * 2)
#define FID_PST_MASK(fid) FID_PST(fid, 0x3)
#define FID_STANDALONE 0
#define FID_BRIDGED 1
and called with:
mt7530_rmw(priv, MT7530_SSP_P(port), FID_PST_MASK(FID_BRIDGED),
FID_PST(FID_BRIDGED, stp_state));
>
> enum mt7530_stp_state {
> MT7530_STP_DISABLED = 0,
> --
> 2.25.1
>
Anyhow.
Reviewed-by: Vladimir Oltean <olteanv@...il.com>
Powered by blists - more mailing lists