linux-kernel - Re: [PATCH v5 1/2] PM / Domains: Add support for 'required-opps' to set default perf state

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives
Hash Suite: Windows password security audit tool. GUI, reports in PDF.
[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <6fe7d326-1822-5a49-cca7-df9a2739dca8@codeaurora.org>
Date:   Wed, 4 Aug 2021 16:38:09 +0530
From:   Rajendra Nayak <rnayak@...eaurora.org>
To:     Ulf Hansson <ulf.hansson@...aro.org>
Cc:     Bjorn Andersson <bjorn.andersson@...aro.org>,
        Viresh Kumar <viresh.kumar@...aro.org>,
        Linux PM <linux-pm@...r.kernel.org>,
        DTML <devicetree@...r.kernel.org>,
        Linux Kernel Mailing List <linux-kernel@...r.kernel.org>,
        linux-arm-msm <linux-arm-msm@...r.kernel.org>,
        Stephen Boyd <swboyd@...omium.org>,
        Roja Rani Yarubandi <rojay@...eaurora.org>,
        Stephan Gerhold <stephan@...hold.net>
Subject: Re: [PATCH v5 1/2] PM / Domains: Add support for 'required-opps' to
 set default perf state


On 8/3/2021 10:08 AM, Rajendra Nayak wrote:
> 
> On 8/2/2021 6:29 PM, Ulf Hansson wrote:
>> On Tue, 20 Jul 2021 at 09:12, Rajendra Nayak <rnayak@...eaurora.org> wrote:
>>>
>>> Some devices within power domains with performance states do not
>>> support DVFS, but still need to vote on a default/static state
>>> while they are active. They can express this using the 'required-opps'
>>> property in device tree, which points to the phandle of the OPP
>>> supported by the corresponding power-domains.
>>>
>>> Add support to parse this information from DT and then set the
>>> specified performance state during attach and drop it on detach.
>>> runtime suspend/resume callbacks already have logic to drop/set
>>> the vote as needed and should take care of dropping the default
>>> perf state vote on runtime suspend and restore it back on runtime
>>> resume.
>>>
>>> Signed-off-by: Rajendra Nayak <rnayak@...eaurora.org>
>>> ---
>>>   drivers/base/power/domain.c | 28 +++++++++++++++++++++++++---
>>>   include/linux/pm_domain.h   |  1 +
>>>   2 files changed, 26 insertions(+), 3 deletions(-)
>>>
>>> diff --git a/drivers/base/power/domain.c b/drivers/base/power/domain.c
>>> index a934c67..f454031 100644
>>> --- a/drivers/base/power/domain.c
>>> +++ b/drivers/base/power/domain.c
>>> @@ -2598,6 +2598,12 @@ static void genpd_dev_pm_detach(struct device *dev, bool power_off)
>>>
>>>          dev_dbg(dev, "removing from PM domain %s\n", pd->name);
>>>
>>> +       /* Drop the default performance state */
>>> +       if (dev_gpd_data(dev)->default_pstate) {
>>> +               dev_pm_genpd_set_performance_state(dev, 0);
>>> +               dev_gpd_data(dev)->default_pstate = 0;
>>> +       }
>>> +
>>>          for (i = 1; i < GENPD_RETRY_MAX_MS; i <<= 1) {
>>>                  ret = genpd_remove_device(pd, dev);
>>>                  if (ret != -EAGAIN)
>>> @@ -2635,9 +2641,10 @@ static void genpd_dev_pm_sync(struct device *dev)
>>>   static int __genpd_dev_pm_attach(struct device *dev, struct device *base_dev,
>>>                                   unsigned int index, bool power_on)
>>>   {
>>> +       struct device_node *np;
>>>          struct of_phandle_args pd_args;
>>>          struct generic_pm_domain *pd;
>>> -       int ret;
>>> +       int ret, pstate;
>>>
>>>          ret = of_parse_phandle_with_args(dev->of_node, "power-domains",
>>>                                  "#power-domain-cells", index, &pd_args);
>>> @@ -2675,10 +2682,25 @@ static int __genpd_dev_pm_attach(struct device *dev, struct device *base_dev,
>>>                  genpd_unlock(pd);
>>>          }
>>>
>>> -       if (ret)
>>> +       if (ret) {
>>>                  genpd_remove_device(pd, dev);
>>> +               return -EPROBE_DEFER;
>>> +       }
>>> +
>>> +       /* Set the default performance state */
>>> +       np = base_dev->of_node;
>>
>> Please use dev->of_node instead (it is set to the same of_node as
>> base_dev by the callers of __genpd_dev_pm_attach) as it's more
>> consistent with existing code.
>>
>>> +       if (of_parse_phandle(np, "required-opps", index)) {
>>> +               pstate = of_get_required_opp_performance_state(np, index);
>>> +               if (pstate < 0) {
>>> +                       ret = pstate;
>>> +                       dev_err(dev, "failed to set required performance state for power-domain %s: %d\n",
>>> +                               pd->name, ret);
>>> +               }
>>> +               dev_pm_genpd_set_performance_state(dev, pstate);
>>> +               dev_gpd_data(dev)->default_pstate = pstate;
>>
>> This doesn't look entirely correct to me. If we fail to translate a
>> required opp to a performance state, we shouldn't try to set it.
> 
> yeah, that does not seem right at all :(
> 
>> Perhaps it's also easier to call
>> of_get_required_opp_performance_state() unconditionally of whether a
>> "required-opps" specifier exists. If it fails with the translation,
>> then we just skip setting a default state and continue with returning
>> 1.
>>
>> Would that work?

Looks like calling of_get_required_opp_performance_state() unconditionally
makes it spit out a pr_err() in case the node is missing "required-opps" property,
so I posted a v6 [1] with the check in place and adding the missing else
condition.

[1] https://lore.kernel.org/patchwork/project/lkml/list/?series=510727

-- 
QUALCOMM INDIA, on behalf of Qualcomm Innovation Center, Inc. is a member
of Code Aurora Forum, hosted by The Linux Foundation