linux-kernel - Re: [PATCH v3] drm/msm/dp: update is_connected status base on sink count at dp_pm

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Message-ID: <ab2a7aadb6ada58246ec972c4938c627@codeaurora.org>
Date:   Wed, 04 Aug 2021 08:48:04 -0700
From:   khsieh@...eaurora.org
To:     Stephen Boyd <swboyd@...omium.org>
Cc:     agross@...nel.org, bjorn.andersson@...aro.org, robdclark@...il.com,
        sean@...rly.run, vkoul@...nel.org, abhinavk@...eaurora.org,
        aravindh@...eaurora.org, freedreno@...ts.freedesktop.org,
        dri-devel@...ts.freedesktop.org, linux-arm-msm@...r.kernel.org,
        linux-kernel@...r.kernel.org
Subject: Re: [PATCH v3] drm/msm/dp: update is_connected status base on sink
 count at dp_pm_resume()

On 2021-08-03 12:05, Stephen Boyd wrote:
> Quoting Kuogee Hsieh (2021-08-03 09:25:13)
>> Currently at dp_pm_resume() is_connected state is decided base on hpd 
>> connection
>> status only. This will put is_connected in wrongly "true" state at the 
>> scenario
>> that dongle attached to DUT but without hmdi cable connecting to it. 
>> Fix this
>> problem by adding read sink count from dongle and decided is_connected 
>> state base
>> on both sink count and hpd connection status.
>> 
>> Changes in v2:
>> -- remove dp_get_sink_count() cand call drm_dp_read_sink_count()
>> 
>> Changes in v3:
>> -- delete status local variable from dp_pm_resume()
>> 
>> Fixes: d9aa6571b28ba ("drm/msm/dp: check sink_count before update 
>> is_connected status")
>> Signed-off-by: Kuogee Hsieh <khsieh@...eaurora.org>
>> ---
>>  drivers/gpu/drm/msm/dp/dp_display.c | 18 +++++++++++++++---
>>  1 file changed, 15 insertions(+), 3 deletions(-)
>> 
>> diff --git a/drivers/gpu/drm/msm/dp/dp_display.c 
>> b/drivers/gpu/drm/msm/dp/dp_display.c
>> index 78c5301..0f39256 100644
>> --- a/drivers/gpu/drm/msm/dp/dp_display.c
>> +++ b/drivers/gpu/drm/msm/dp/dp_display.c
>> @@ -1313,7 +1313,7 @@ static int dp_pm_resume(struct device *dev)
>>         struct platform_device *pdev = to_platform_device(dev);
>>         struct msm_dp *dp_display = platform_get_drvdata(pdev);
>>         struct dp_display_private *dp;
>> -       u32 status;
>> +       int sink_count = 0;
>> 
>>         dp = container_of(dp_display, struct dp_display_private, 
>> dp_display);
>> 
>> @@ -1327,14 +1327,26 @@ static int dp_pm_resume(struct device *dev)
>> 
>>         dp_catalog_ctrl_hpd_config(dp->catalog);
>> 
>> -       status = dp_catalog_link_is_connected(dp->catalog);
>> +       /*
>> +        * set sink to normal operation mode -- D0
>> +        * before dpcd read
>> +        */
>> +       dp_link_psm_config(dp->link, &dp->panel->link_info, false);
>> +
>> +       /* if sink conencted, do dpcd read sink count */
> 
> s/conencted/connected/
> 
> This also just says what the code is doing. Why do we only read the 
> sink
> count if the link is connected? Can we read the sink count even if the
> link isn't connected and then consider sink count as 0 if trying to 
> read
> fails?
> 
yes, we can do that.
But it will suffer aux time out and retry.
i think it is better to avoid this overhead by check connection first.

>> +       if (dp_catalog_link_is_connected(dp->catalog)) {
>> +               sink_count = drm_dp_read_sink_count(dp->aux);
>> +               if (sink_count < 0)
>> +                       sink_count = 0;
>> +       }
>> 
>> +       dp->link->sink_count = sink_count;
>>         /*
>>          * can not declared display is connected unless
>>          * HDMI cable is plugged in and sink_count of
>>          * dongle become 1
>>          */
>> -       if (status && dp->link->sink_count)
>> +       if (dp->link->sink_count)
>>                 dp->dp_display.is_connected = true;
>>         else
>>                 dp->dp_display.is_connected = false;