linux-kernel - [PATCH v2 1/3] dt-bindings: watchdog: sunxi: Add compatible for R329

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [thread-next>] [day] [month] [year] [list]

Date:   Wed,  4 Aug 2021 23:57:14 -0500
From:   Samuel Holland <samuel@...lland.org>
To:     Wim Van Sebroeck <wim@...ux-watchdog.org>,
        Guenter Roeck <linux@...ck-us.net>,
        Rob Herring <robh+dt@...nel.org>,
        Maxime Ripard <mripard@...nel.org>,
        Chen-Yu Tsai <wens@...e.org>,
        Jernej Skrabec <jernej.skrabec@...il.com>
Cc:     devicetree@...r.kernel.org, linux-arm-kernel@...ts.infradead.org,
        linux-sunxi@...ts.linux.dev, linux-watchdog@...r.kernel.org,
        linux-kernel@...r.kernel.org, Samuel Holland <samuel@...lland.org>
Subject: [PATCH v2 1/3] dt-bindings: watchdog: sunxi: Add compatible for R329

On existing SoCs, the watchdog has a single clock input: HOSC (OSC24M)
divided by 750.  However, starting with R329, LOSC (OSC32k) is added as
an alternative clock source, with a bit to switch between them.

Since 24 MHz / 750 == 32 kHz, not 32.768 kHz, the hardware adjusts the
cycle counts to keep the timeouts independent of the clock source. This
keeps the programming interface backward-compatible.

R329 also adds two new registers, to allow software to immediately drive
the SoC reset signal.

Signed-off-by: Samuel Holland <samuel@...lland.org>
---
Changes v1 to v2:
 - Switch from enum to const
 - Add descriptions to "clocks" items

 .../watchdog/allwinner,sun4i-a10-wdt.yaml     | 32 ++++++++++++++++++-
 1 file changed, 31 insertions(+), 1 deletion(-)

diff --git a/Documentation/devicetree/bindings/watchdog/allwinner,sun4i-a10-wdt.yaml b/Documentation/devicetree/bindings/watchdog/allwinner,sun4i-a10-wdt.yaml
index 9aa3c313c49f..8fa5b0d32381 100644
--- a/Documentation/devicetree/bindings/watchdog/allwinner,sun4i-a10-wdt.yaml
+++ b/Documentation/devicetree/bindings/watchdog/allwinner,sun4i-a10-wdt.yaml
@@ -24,6 +24,7 @@ properties:
               - allwinner,sun50i-a100-wdt
               - allwinner,sun50i-h6-wdt
               - allwinner,sun50i-h616-wdt
+              - allwinner,sun50i-r329-wdt
           - const: allwinner,sun6i-a31-wdt
       - items:
           - const: allwinner,suniv-f1c100s-wdt
@@ -33,7 +34,18 @@ properties:
     maxItems: 1
 
   clocks:
-    maxItems: 1
+    minItems: 1
+    maxItems: 2
+    items:
+      - description: High-frequency oscillator input, divided internally
+      - description: Low-frequency oscillator input, only found on some variants
+
+  clock-names:
+    minItems: 1
+    maxItems: 2
+    items:
+      - const: hosc
+      - const: losc
 
   interrupts:
     maxItems: 1
@@ -44,6 +56,24 @@ required:
   - clocks
   - interrupts
 
+if:
+  properties:
+    compatible:
+      contains:
+        enum:
+          - allwinner,sun50i-r329-wdt
+
+then:
+  properties:
+    clocks:
+      minItems: 2
+
+    clock-names:
+      minItems: 2
+
+  required:
+    - clock-names
+
 unevaluatedProperties: false
 
 examples:
-- 
2.31.1