[<prev] [next>] [thread-next>] [day] [month] [year] [list]
Message-ID: <20210805230956.7379-1-grygorii.strashko@ti.com>
Date: Fri, 6 Aug 2021 02:09:56 +0300
From: Grygorii Strashko <grygorii.strashko@...com>
To: Tony Lindgren <tony@...mide.com>, <linux-omap@...r.kernel.org>
CC: Lokesh Vutla <lokeshvutla@...com>,
Paul Barker <paul.barker@...cloud.com>,
<linux-kernel@...r.kernel.org>,
Vignesh Raghavendra <vigneshr@...com>,
Grygorii Strashko <grygorii.strashko@...com>
Subject: [PATCH v2] ARM: dts: am335x-bone: switch to new cpsw switch drv
The dual_mac mode has been preserved the same way between legacy and new
driver, and one port devices works the same as 1 dual_mac port - it's safe
to switch drivers.
So, Switch BeagleBone boards to use new cpsw switch driver. Those boards
have or 2 Ext. port wired and configured in dual_mac mode by default, or
only 1 Ext. port.
For am335x-sancloud-bbe-common.dtsi also removed duplicated davinci_mdio DT
nodes which already defined in am335x-bone-common.dtsi.
Signed-off-by: Grygorii Strashko <grygorii.strashko@...com>
---
changes in v2:
- commit message updated to indicate duplicated nodes removal in am335x-sancloud-bbe-common.dtsi
- dropped phy-handle for cpsw port in am335x-sancloud-bbe-common.dtsi
arch/arm/boot/dts/am335x-bone-common.dtsi | 13 ++++---
.../boot/dts/am335x-boneblack-wireless.dts | 2 +-
.../boot/dts/am335x-bonegreen-wireless.dts | 2 +-
.../boot/dts/am335x-sancloud-bbe-common.dtsi | 34 ++-----------------
4 files changed, 12 insertions(+), 39 deletions(-)
diff --git a/arch/arm/boot/dts/am335x-bone-common.dtsi b/arch/arm/boot/dts/am335x-bone-common.dtsi
index 34a0045b5f65..0ccdc7cd463b 100644
--- a/arch/arm/boot/dts/am335x-bone-common.dtsi
+++ b/arch/arm/boot/dts/am335x-bone-common.dtsi
@@ -353,24 +353,27 @@
};
};
-&cpsw_emac0 {
+&cpsw_port1 {
phy-handle = <ðphy0>;
phy-mode = "mii";
+ ti,dual-emac-pvid = <1>;
};
-&mac {
- slaves = <1>;
+&cpsw_port2 {
+ status = "disabled";
+};
+
+&mac_sw {
pinctrl-names = "default", "sleep";
pinctrl-0 = <&cpsw_default>;
pinctrl-1 = <&cpsw_sleep>;
status = "okay";
};
-&davinci_mdio {
+&davinci_mdio_sw {
pinctrl-names = "default", "sleep";
pinctrl-0 = <&davinci_mdio_default>;
pinctrl-1 = <&davinci_mdio_sleep>;
- status = "okay";
ethphy0: ethernet-phy@0 {
reg = <0>;
diff --git a/arch/arm/boot/dts/am335x-boneblack-wireless.dts b/arch/arm/boot/dts/am335x-boneblack-wireless.dts
index 8b2b24c80670..c72b09ab8da0 100644
--- a/arch/arm/boot/dts/am335x-boneblack-wireless.dts
+++ b/arch/arm/boot/dts/am335x-boneblack-wireless.dts
@@ -63,7 +63,7 @@
};
};
-&mac {
+&mac_sw {
status = "disabled";
};
diff --git a/arch/arm/boot/dts/am335x-bonegreen-wireless.dts b/arch/arm/boot/dts/am335x-bonegreen-wireless.dts
index 74db0fc39397..215f279e476b 100644
--- a/arch/arm/boot/dts/am335x-bonegreen-wireless.dts
+++ b/arch/arm/boot/dts/am335x-bonegreen-wireless.dts
@@ -62,7 +62,7 @@
};
};
-&mac {
+&mac_sw {
status = "disabled";
};
diff --git a/arch/arm/boot/dts/am335x-sancloud-bbe-common.dtsi b/arch/arm/boot/dts/am335x-sancloud-bbe-common.dtsi
index bd9c21813192..627c18d23f94 100644
--- a/arch/arm/boot/dts/am335x-sancloud-bbe-common.dtsi
+++ b/arch/arm/boot/dts/am335x-sancloud-bbe-common.dtsi
@@ -40,22 +40,6 @@
>;
};
- davinci_mdio_default: davinci_mdio_default {
- pinctrl-single,pins = <
- /* MDIO */
- AM33XX_PADCONF(AM335X_PIN_MDIO, PIN_INPUT_PULLUP | SLEWCTRL_FAST, MUX_MODE0)
- AM33XX_PADCONF(AM335X_PIN_MDC, PIN_OUTPUT_PULLUP, MUX_MODE0)
- >;
- };
-
- davinci_mdio_sleep: davinci_mdio_sleep {
- pinctrl-single,pins = <
- /* MDIO reset value */
- AM33XX_PADCONF(AM335X_PIN_MDIO, PIN_INPUT_PULLDOWN, MUX_MODE7)
- AM33XX_PADCONF(AM335X_PIN_MDC, PIN_INPUT_PULLDOWN, MUX_MODE7)
- >;
- };
-
usb_hub_ctrl: usb_hub_ctrl {
pinctrl-single,pins = <
AM33XX_PADCONF(AM335X_PIN_RMII1_REF_CLK, PIN_OUTPUT_PULLUP, MUX_MODE7) /* rmii1_refclk.gpio0_29 */
@@ -63,26 +47,12 @@
};
};
-&mac {
- pinctrl-names = "default", "sleep";
+&mac_sw {
pinctrl-0 = <&cpsw_default>;
pinctrl-1 = <&cpsw_sleep>;
- status = "okay";
-};
-
-&davinci_mdio {
- pinctrl-names = "default", "sleep";
- pinctrl-0 = <&davinci_mdio_default>;
- pinctrl-1 = <&davinci_mdio_sleep>;
- status = "okay";
-
- ethphy0: ethernet-phy@0 {
- reg = <0>;
- };
};
-&cpsw_emac0 {
- phy-handle = <ðphy0>;
+&cpsw_port1 {
phy-mode = "rgmii-id";
};
--
2.17.1
Powered by blists - more mailing lists