| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <4380bec9-a451-52fe-a49f-e305821f7ee9@monstr.eu>
Date: Fri, 6 Aug 2021 10:23:28 +0200
From: Michal Simek <monstr@...str.eu>
To: Michal Simek <michal.simek@...inx.com>,
linux-kernel@...r.kernel.org, git@...inx.com,
Viresh Kumar <viresh.kumar@...aro.org>
Cc: Amit Kumar Mahapatra <amit.kumar-mahapatra@...inx.com>,
Geert Uytterhoeven <geert+renesas@...der.be>,
Krzysztof Kozlowski <krzk@...nel.org>,
Laurent Pinchart <laurent.pinchart@...asonboard.com>,
Michael Walle <michael@...le.cc>,
Quanyang Wang <quanyang.wang@...driver.com>,
Rob Herring <robh+dt@...nel.org>, devicetree@...r.kernel.org,
linux-arm-kernel@...ts.infradead.org
Subject: Re: [PATCH v2 00/33] arm64: zynqmp: Extend board description
On 6/14/21 5:25 PM, Michal Simek wrote:
> Hi,
>
> over years couple of drivers were upstream and it is time to sync it up.
> On the top of it also adding new Kria boards which are using new overlay
> infrastructure which check if that overlays can be applied to base DT file.
>
> Thanks,
> Michal
>
> Changes in v2:
> - Add reviewed-by from Laurent
> - New patch in the series
> - New patch in the series
> - Use sugar syntax - reported by Geert
> - Update copyright years
> - Fix SD3.0 comment alignment
> - Remove one newline from Makefile
>
> Amit Kumar Mahapatra (1):
> arm64: zynqmp: Do not duplicate flash partition label property
>
> Michal Simek (29):
> arm64: zynqmp: Disable CCI by default
> arm64: zynqmp: Enable fpd_dma for zcu104 platforms
> arm64: zynqmp: Fix irps5401 device nodes
> arm64: zynqmp: Add pinctrl description for all boards
> arm64: zynqmp: Correct zcu111 psgtr description
> arm64: zynqmp: Wire psgtr for zc1751-xm015
> arm64: zynqmp: Correct psgtr description for zcu100-revC
> arm64: zynqmp: Add phy description for usb3.0
> arm64: zynqmp: Disable WP on zcu111
> arm64: zynqmp: Add missing mio-bank properties to dc1 and dc5
> arm64: zynqmp: Wire DP and DPDMA for dc1/dc4
> arm64: zynqmp: Enable nand driver for dc2 and dc3
> arm64: zynqmp: Remove additional newline
> arm64: zynqmp: Move clock node to zynqmp-clk-ccf.dtsi
> arm64: zynqmp: Add nvmem alises for eeproms
> arm64: zynqmp: List reset property for ethernet phy
> arm64: zynqmp: Remove can aliases from zc1751
> arm64: zynqmp: Move DP nodes to the end of file on zcu106
> arm64: zynqmp: Add note about UHS mode on some boards
> arm64: zynqmp: Remove information about dma clock on zcu106
> arm64: zynqmp: Wire qspi on multiple boards
> arm64: zynqmp: Move rtc to different location on zcu104-revA
> arm64: zynqmp: Add reset description for sata
> arm64: zynqmp: Sync psgtr node location with zcu104-revA
> arm64: zynqmp: Remove description for 8T49N287 and si5382 chips
> arm64: zynqmp: Add support for zcu102-rev1.1 board
> arm64: zynqmp: Enable xlnx,zynqmp-dwc3 driver for xilinx boards
> arm64: zynqmp: Add psgtr description to zc1751 dc1 board
> arm64: zynqmp: Add support for Xilinx Kria SOM board
>
> Mounika Grace Akula (1):
> arm64: zynqmp: Add reset-on-timeout to all boards and modify default
> timeout value
>
> Srinivas Neeli (1):
> arm64: zynqmp: Update rtc calibration value
>
> Stefano Stabellini (1):
> arm64: zynqmp: Add missing SMID for pcie to zynqmp.dtsi
>
> .../devicetree/bindings/arm/xilinx.yaml | 32 ++
> arch/arm64/boot/dts/xilinx/Makefile | 11 +
> .../arm64/boot/dts/xilinx/zynqmp-clk-ccf.dtsi | 13 +-
> .../boot/dts/xilinx/zynqmp-sck-kv-g-revA.dts | 335 +++++++++++++++++
> .../boot/dts/xilinx/zynqmp-sck-kv-g-revB.dts | 318 ++++++++++++++++
> .../boot/dts/xilinx/zynqmp-sm-k26-revA.dts | 289 +++++++++++++++
> .../boot/dts/xilinx/zynqmp-smk-k26-revA.dts | 21 ++
> .../boot/dts/xilinx/zynqmp-zc1232-revA.dts | 16 +-
> .../boot/dts/xilinx/zynqmp-zc1254-revA.dts | 16 +-
> .../dts/xilinx/zynqmp-zc1751-xm015-dc1.dts | 298 ++++++++++++++-
> .../dts/xilinx/zynqmp-zc1751-xm016-dc2.dts | 342 +++++++++++++++++-
> .../dts/xilinx/zynqmp-zc1751-xm017-dc3.dts | 23 +-
> .../dts/xilinx/zynqmp-zc1751-xm018-dc4.dts | 24 +-
> .../dts/xilinx/zynqmp-zc1751-xm019-dc5.dts | 330 ++++++++++++++++-
> .../boot/dts/xilinx/zynqmp-zcu100-revC.dts | 264 +++++++++++++-
> .../boot/dts/xilinx/zynqmp-zcu102-rev1.1.dts | 15 +
> .../boot/dts/xilinx/zynqmp-zcu102-revA.dts | 321 +++++++++++++++-
> .../boot/dts/xilinx/zynqmp-zcu102-revB.dts | 3 +-
> .../boot/dts/xilinx/zynqmp-zcu104-revA.dts | 292 ++++++++++++++-
> .../boot/dts/xilinx/zynqmp-zcu104-revC.dts | 250 ++++++++++++-
> .../boot/dts/xilinx/zynqmp-zcu106-revA.dts | 341 ++++++++++++++++-
> .../boot/dts/xilinx/zynqmp-zcu111-revA.dts | 275 +++++++++++++-
> arch/arm64/boot/dts/xilinx/zynqmp.dtsi | 99 +++--
> 23 files changed, 3833 insertions(+), 95 deletions(-)
> create mode 100644 arch/arm64/boot/dts/xilinx/zynqmp-sck-kv-g-revA.dts
> create mode 100644 arch/arm64/boot/dts/xilinx/zynqmp-sck-kv-g-revB.dts
> create mode 100644 arch/arm64/boot/dts/xilinx/zynqmp-sm-k26-revA.dts
> create mode 100644 arch/arm64/boot/dts/xilinx/zynqmp-smk-k26-revA.dts
> create mode 100644 arch/arm64/boot/dts/xilinx/zynqmp-zcu102-rev1.1.dts
>
Applied 1-30, 32.
31 and 33 requires newer version.
Thanks,
Michal
--
Michal Simek, Ing. (M.Eng), OpenPGP -> KeyID: FE3D1F91
w: www.monstr.eu p: +42-0-721842854
Maintainer of Linux kernel - Xilinx Microblaze
Maintainer of Linux kernel - Xilinx Zynq ARM and ZynqMP ARM64 SoCs
U-Boot custodian - Xilinx Microblaze/Zynq/ZynqMP/Versal SoCs
Powered by blists - more mailing lists