linux-kernel - [PATCH 2/4] nvmem: qfprom: Fix up qfprom_disable_fuse

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Message-Id: <20210806085947.22682-3-srinivas.kandagatla@linaro.org>
Date:   Fri,  6 Aug 2021 09:59:45 +0100
From:   Srinivas Kandagatla <srinivas.kandagatla@...aro.org>
To:     gregkh@...uxfoundation.org
Cc:     linux-kernel@...r.kernel.org,
        Rajendra Nayak <rnayak@...eaurora.org>,
        Douglas Anderson <dianders@...omium.org>,
        Srinivas Kandagatla <srinivas.kandagatla@...aro.org>
Subject: [PATCH 2/4] nvmem: qfprom: Fix up qfprom_disable_fuse_blowing() ordering

From: Rajendra Nayak <rnayak@...eaurora.org>

qfprom_disable_fuse_blowing() disables a bunch of resources,
and then does a few register writes in the 'conf' address
space.
It works perhaps because the resources are needed only for the
'raw' register space writes, and that the 'conf' space allows
read/writes regardless.
However that makes the code look confusing, so just move the
register writes before turning off the resources in the
function.

Signed-off-by: Rajendra Nayak <rnayak@...eaurora.org>
Reviewed-by: Douglas Anderson <dianders@...omium.org>
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@...aro.org>
---
 drivers/nvmem/qfprom.c | 6 +++---
 1 file changed, 3 insertions(+), 3 deletions(-)

diff --git a/drivers/nvmem/qfprom.c b/drivers/nvmem/qfprom.c
index 81fbad5e939d..b0ca4c626466 100644
--- a/drivers/nvmem/qfprom.c
+++ b/drivers/nvmem/qfprom.c
@@ -139,6 +139,9 @@ static void qfprom_disable_fuse_blowing(const struct qfprom_priv *priv,
 {
 	int ret;
 
+	writel(old->timer_val, priv->qfpconf + QFPROM_BLOW_TIMER_OFFSET);
+	writel(old->accel_val, priv->qfpconf + QFPROM_ACCEL_OFFSET);
+
 	/*
 	 * This may be a shared rail and may be able to run at a lower rate
 	 * when we're not blowing fuses.  At the moment, the regulator framework
@@ -159,9 +162,6 @@ static void qfprom_disable_fuse_blowing(const struct qfprom_priv *priv,
 			 "Failed to set clock rate for disable (ignoring)\n");
 
 	clk_disable_unprepare(priv->secclk);
-
-	writel(old->timer_val, priv->qfpconf + QFPROM_BLOW_TIMER_OFFSET);
-	writel(old->accel_val, priv->qfpconf + QFPROM_ACCEL_OFFSET);
 }
 
 /**
-- 
2.21.0