| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Date: Fri, 6 Aug 2021 18:27:18 +0530
From: Vinod Koul <vkoul@...nel.org>
To: Iskren Chernev <iskren.chernev@...il.com>
Cc: Bjorn Andersson <bjorn.andersson@...aro.org>,
Andy Gross <agross@...nel.org>,
Kishon Vijay Abraham I <kishon@...com>,
Manu Gautam <mgautam@...eaurora.org>,
Rob Herring <robh+dt@...nel.org>, devicetree@...r.kernel.org,
linux-arm-msm@...r.kernel.org, linux-kernel@...r.kernel.org,
linux-phy@...ts.infradead.org, phone-devel@...r.kernel.org,
~postmarketos/upstreaming@...ts.sr.ht
Subject: Re: [PATCH v1 2/2] phy: qcom-qmp: Add support for SM6115 UFS phy
On 05-08-21, 12:17, Iskren Chernev wrote:
> +/* Only for QMP V3 660 PHY - QSERDES COM registers*/
> +#define QSERDES_V3_660_COM_ATB_SEL1 0x000
> +#define QSERDES_V3_660_COM_ATB_SEL2 0x004
> +#define QSERDES_V3_660_COM_FREQ_UPDATE 0x008
> +#define QSERDES_V3_660_COM_BG_TIMER 0x00c
> +#define QSERDES_V3_660_COM_SSC_EN_CENTER 0x010
> +#define QSERDES_V3_660_COM_SSC_ADJ_PER1 0x014
> +#define QSERDES_V3_660_COM_SSC_ADJ_PER2 0x018
> +#define QSERDES_V3_660_COM_SSC_PER1 0x01c
> +#define QSERDES_V3_660_COM_SSC_PER2 0x020
> +#define QSERDES_V3_660_COM_SSC_STEP_SIZE1 0x024
> +#define QSERDES_V3_660_COM_SSC_STEP_SIZE2 0x028
> +#define QSERDES_V3_660_COM_POST_DIV 0x02c
> +#define QSERDES_V3_660_COM_POST_DIV_MUX 0x030
> +#define QSERDES_V3_660_COM_BIAS_EN_CLKBUFLR_EN 0x034
> +#define QSERDES_V3_660_COM_CLK_ENABLE1 0x038
> +#define QSERDES_V3_660_COM_SYS_CLK_CTRL 0x03c
> +#define QSERDES_V3_660_COM_SYSCLK_BUF_ENABLE 0x040
> +#define QSERDES_V3_660_COM_PLL_EN 0x044
> +#define QSERDES_V3_660_COM_PLL_IVCO 0x048
> +#define QSERDES_V3_660_COM_LOCK_CMP1_MODE0 0x04c
> +#define QSERDES_V3_660_COM_LOCK_CMP2_MODE0 0x050
> +#define QSERDES_V3_660_COM_LOCK_CMP3_MODE0 0x054
> +#define QSERDES_V3_660_COM_LOCK_CMP1_MODE1 0x058
> +#define QSERDES_V3_660_COM_LOCK_CMP2_MODE1 0x05c
> +#define QSERDES_V3_660_COM_LOCK_CMP3_MODE1 0x060
> +#define QSERDES_V3_660_COM_CMD_RSVD0 0x064
> +#define QSERDES_V3_660_COM_EP_CLOCK_DETECT_CTRL 0x068
> +#define QSERDES_V3_660_COM_SYSCLK_DET_COMP_STATUS 0x06c
> +#define QSERDES_V3_660_COM_BG_TRIM 0x070
> +#define QSERDES_V3_660_COM_CLK_EP_DIV 0x074
> +#define QSERDES_V3_660_COM_CP_CTRL_MODE0 0x078
> +#define QSERDES_V3_660_COM_CP_CTRL_MODE1 0x07c
> +#define QSERDES_V3_660_COM_CMN_RSVD1 0x080
> +#define QSERDES_V3_660_COM_PLL_RCTRL_MODE0 0x084
> +#define QSERDES_V3_660_COM_PLL_RCTRL_MODE1 0x088
> +#define QSERDES_V3_660_COM_CMN_RSVD2 0x08c
> +#define QSERDES_V3_660_COM_PLL_CCTRL_MODE0 0x090
> +#define QSERDES_V3_660_COM_PLL_CCTRL_MODE1 0x094
> +#define QSERDES_V3_660_COM_CMN_RSVD3 0x098
> +#define QSERDES_V3_660_COM_PLL_CNTRL 0x09c
> +#define QSERDES_V3_660_COM_PHASE_SEL_CTRL 0x0a0
> +#define QSERDES_V3_660_COM_PHASE_SEL_DC 0x0a4
> +#define QSERDES_V3_660_COM_BIAS_EN_CTRL_BY_PSM 0x0a8
> +#define QSERDES_V3_660_COM_SYSCLK_EN_SEL 0x0ac
> +#define QSERDES_V3_660_COM_CML_SYSCLK_SEL 0x0b0
> +#define QSERDES_V3_660_COM_RESETSM_CNTRL 0x0b4
> +#define QSERDES_V3_660_COM_RESETSM_CNTRL2 0x0b8
> +#define QSERDES_V3_660_COM_RESTRIM_CTRL 0x0bc
> +#define QSERDES_V3_660_COM_RESTRIM_CTRL2 0x0c0
> +#define QSERDES_V3_660_COM_LOCK_CMP_EN 0x0c8
> +#define QSERDES_V3_660_COM_LOCK_CMP_CFG 0x0cc
> +#define QSERDES_V3_660_COM_DEC_START_MODE0 0x0d0
> +#define QSERDES_V3_660_COM_DEC_START_MODE1 0x0d4
> +#define QSERDES_V3_660_COM_VCOCAL_DEADMAN_CTRL 0x0d8
> +#define QSERDES_V3_660_COM_DIV_FRAC_START1_MODE0 0x0dc
> +#define QSERDES_V3_660_COM_DIV_FRAC_START2_MODE0 0x0e0
> +#define QSERDES_V3_660_COM_DIV_FRAC_START3_MODE0 0x0e4
> +#define QSERDES_V3_660_COM_DIV_FRAC_START1_MODE1 0x0e8
> +#define QSERDES_V3_660_COM_DIV_FRAC_START2_MODE1 0x0ec
> +#define QSERDES_V3_660_COM_DIV_FRAC_START3_MODE1 0x0f0
> +#define QSERDES_V3_660_COM_VCO_TUNE_MINVAL1 0x0f4
> +#define QSERDES_V3_660_COM_VCO_TUNE_MINVAL2 0x0f8
> +#define QSERDES_V3_660_COM_CMN_RSVD4 0x0fc
> +#define QSERDES_V3_660_COM_INTEGLOOP_INITVAL 0x100
> +#define QSERDES_V3_660_COM_INTEGLOOP_EN 0x104
> +#define QSERDES_V3_660_COM_INTEGLOOP_GAIN0_MODE0 0x108
> +#define QSERDES_V3_660_COM_INTEGLOOP_GAIN1_MODE0 0x10c
> +#define QSERDES_V3_660_COM_INTEGLOOP_GAIN0_MODE1 0x110
> +#define QSERDES_V3_660_COM_INTEGLOOP_GAIN1_MODE1 0x114
> +#define QSERDES_V3_660_COM_VCO_TUNE_MAXVAL1 0x118
> +#define QSERDES_V3_660_COM_VCO_TUNE_MAXVAL2 0x11c
> +#define QSERDES_V3_660_COM_RES_TRIM_CONTROL2 0x120
> +#define QSERDES_V3_660_COM_VCO_TUNE_CTRL 0x124
> +#define QSERDES_V3_660_COM_VCO_TUNE_MAP 0x128
> +#define QSERDES_V3_660_COM_VCO_TUNE1_MODE0 0x12c
> +#define QSERDES_V3_660_COM_VCO_TUNE2_MODE0 0x130
> +#define QSERDES_V3_660_COM_VCO_TUNE1_MODE1 0x134
> +#define QSERDES_V3_660_COM_VCO_TUNE2_MODE1 0x138
> +#define QSERDES_V3_660_COM_VCO_TUNE_INITVAL1 0x13c
> +#define QSERDES_V3_660_COM_VCO_TUNE_INITVAL2 0x140
> +#define QSERDES_V3_660_COM_VCO_TUNE_TIMER1 0x144
> +#define QSERDES_V3_660_COM_VCO_TUNE_TIMER2 0x148
> +#define QSERDES_V3_660_COM_SAR 0x14c
> +#define QSERDES_V3_660_COM_SAR_CLK 0x150
> +#define QSERDES_V3_660_COM_SAR_CODE_OUT_STATUS 0x154
> +#define QSERDES_V3_660_COM_SAR_CODE_READY_STATUS 0x158
> +#define QSERDES_V3_660_COM_CMN_STATUS 0x15c
> +#define QSERDES_V3_660_COM_RESET_SM_STATUS 0x160
> +#define QSERDES_V3_660_COM_RESTRIM_CODE_STATUS 0x164
> +#define QSERDES_V3_660_COM_PLLCAL_CODE1_STATUS 0x168
> +#define QSERDES_V3_660_COM_PLLCAL_CODE2_STATUS 0x16c
> +#define QSERDES_V3_660_COM_BG_CTRL 0x170
> +#define QSERDES_V3_660_COM_CLK_SELECT 0x174
> +#define QSERDES_V3_660_COM_HSCLK_SEL 0x178
> +#define QSERDES_V3_660_COM_INTEGLOOP_BINCODE_STATUS 0x17c
> +#define QSERDES_V3_660_COM_PLL_ANALOG 0x180
> +#define QSERDES_V3_660_COM_CORECLK_DIV 0x184
> +#define QSERDES_V3_660_COM_SW_RESET 0x188
> +#define QSERDES_V3_660_COM_CORE_CLK_EN 0x18c
> +#define QSERDES_V3_660_COM_C_READY_STATUS 0x190
> +#define QSERDES_V3_660_COM_CMN_CONFIG 0x194
> +#define QSERDES_V3_660_COM_CMN_RATE_OVERRIDE 0x198
> +#define QSERDES_V3_660_COM_SVS_MODE_CLK_SEL 0x19c
> +#define QSERDES_V3_660_COM_DEBUG_BUS0 0x1a0
> +#define QSERDES_V3_660_COM_DEBUG_BUS1 0x1a4
> +#define QSERDES_V3_660_COM_DEBUG_BUS2 0x1a8
> +#define QSERDES_V3_660_COM_DEBUG_BUS3 0x1ac
> +#define QSERDES_V3_660_COM_DEBUG_BUS_SEL 0x1b0
> +#define QSERDES_V3_660_COM_CMN_MISC1 0x1b4
> +#define QSERDES_V3_660_COM_CORECLK_DIV_MODE1 0x1bc
> +#define QSERDES_V3_660_COM_CMN_RSVD5 0x1c0
why are these registers 660 specific and not V3 like we have for
other generations..? Quick looks with V3 regs tells me that seem
similar....
--
~Vinod
Powered by blists - more mailing lists