| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Date: Mon, 9 Aug 2021 13:07:18 +0530
From: Puranjay Mohan <puranjay12@...il.com>
To: Jonathan Cameron <jic23@...nel.org>
Cc: "Hennerich, Michael" <Michael.Hennerich@...log.com>,
devicetree <devicetree@...r.kernel.org>,
linux-iio <linux-iio@...r.kernel.org>,
Linux Kernel Mailing List <linux-kernel@...r.kernel.org>,
Lars-Peter Clausen <lars@...afoo.de>,
"Bogdan, Dragos" <Dragos.Bogdan@...log.com>,
"Berghe, Darius" <Darius.Berghe@...log.com>, robh+dt@...nel.org
Subject: Re: [PATCH v8 1/3] dt-bindings: iio: accel: Add DT binding doc for ADXL355
On Sun, Aug 8, 2021 at 9:10 PM Jonathan Cameron <jic23@...nel.org> wrote:
>
> On Sun, 8 Aug 2021 16:06:28 +0100
> Jonathan Cameron <jic23@...nel.org> wrote:
>
> > On Wed, 4 Aug 2021 19:33:07 +0530
> > Puranjay Mohan <puranjay12@...il.com> wrote:
> >
> > > Add devicetree binding document for ADXL355, a 3-Axis MEMS Accelerometer.
> > >
> > > Signed-off-by: Puranjay Mohan <puranjay12@...il.com>
> >
> > Looks good to me. I'll pick this up once Rob and anyone else interested
> > has had time to take a look assuming they don't ask for any changes.
> >
> > Thanks,
> >
> > Jonathan
> >
> >
> > > ---
> > > .../bindings/iio/accel/adi,adxl355.yaml | 88 +++++++++++++++++++
> > > 1 file changed, 88 insertions(+)
> > > create mode 100644 Documentation/devicetree/bindings/iio/accel/adi,adxl355.yaml
> > >
> > > diff --git a/Documentation/devicetree/bindings/iio/accel/adi,adxl355.yaml b/Documentation/devicetree/bindings/iio/accel/adi,adxl355.yaml
> > > new file mode 100644
> > > index 000000000..5da3fd5ad
> > > --- /dev/null
> > > +++ b/Documentation/devicetree/bindings/iio/accel/adi,adxl355.yaml
> > > @@ -0,0 +1,88 @@
> > > +# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
> > > +%YAML 1.2
> > > +---
> > > +$id: http://devicetree.org/schemas/iio/accel/adi,adxl355.yaml#
> > > +$schema: http://devicetree.org/meta-schemas/core.yaml#
> > > +
> > > +title: Analog Devices ADXL355 3-Axis, Low noise MEMS Accelerometer
> > > +
> > > +maintainers:
> > > + - Puranjay Mohan <puranjay12@...il.com>
> > > +
> > > +description: |
> > > + Analog Devices ADXL355 3-Axis, Low noise MEMS Accelerometer that supports
> > > + both I2C & SPI interfaces
> > > + https://www.analog.com/en/products/adxl355.html
> > > +
> > > +properties:
> > > + compatible:
> > > + enum:
> > > + - adi,adxl355
> > > +
> > > + reg:
> > > + maxItems: 1
> > > +
> > > + interrupts:
> > > + minItems: 1
> > > + maxItems: 3
> > > + description: |
> > > + Type should be IRQ_TYPE_LEVEL_HIGH.
> > > + Three configurable interrupt lines exist.
>
> I just noticed from the datasheet, that INT1 and INT2 have controllable
> polarity on the device. We should look to support that rather than
> stating all 3 interrupts are LEVEL_HIGH. For now, I'd just not
> state the type here, or make that statement only for the dataready pin.
>
Hi Jonathan,
I will be sending v9 of this series where I will state this only for
the DRDY pin. I will also make the scale defines inline for the other
patch.
Also, I will not send the third patch: trigger support in v9 because
it needs a lot of work.
It would be great if the base driver gets accepted and I will keep
working on the trigger support separately and not as a part of this
patch series.
I am also interested in looking into fwnode_get_irq_byname() for the
trigger patch.
> Once you enable these interrupts, you will want to handle the polarity setting
> in a similar fashion to the bmi160.
>
> It is a bit messy to combine the interrupt polarity at the interrupt controller
> with that at the device, but that is how we've handled these in the past.
>
> Jonathan
>
> > > +
> > > + interrupt-names:
> > > + description: Specify which interrupt line is in use.
> > > + items:
> > > + enum:
> > > + - INT1
> > > + - INT2
> > > + - DRDY
> > > + minItems: 1
> > > + maxItems: 3
> > > +
> > > + vdd-supply:
> > > + description: Regulator that provides power to the sensor
> > > +
> > > + vddio-supply:
> > > + description: Regulator that provides power to the bus
> > > +
> > > + spi-max-frequency: true
> > > +
> > > +required:
> > > + - compatible
> > > + - reg
> > > +
> > > +additionalProperties: false
> > > +
> > > +examples:
> > > + - |
> > > + #include <dt-bindings/gpio/gpio.h>
> > > + #include <dt-bindings/interrupt-controller/irq.h>
> > > + i2c {
> > > + #address-cells = <1>;
> > > + #size-cells = <0>;
> > > +
> > > + /* Example for a I2C device node */
> > > + accelerometer@1d {
> > > + compatible = "adi,adxl355";
> > > + reg = <0x1d>;
> > > + interrupt-parent = <&gpio>;
> > > + interrupts = <25 IRQ_TYPE_EDGE_RISING>;
> > > + interrupt-names = "DRDY";
> > > + };
> > > + };
> > > + - |
> > > + #include <dt-bindings/gpio/gpio.h>
> > > + #include <dt-bindings/interrupt-controller/irq.h>
> > > + spi {
> > > + #address-cells = <1>;
> > > + #size-cells = <0>;
> > > +
> > > + accelerometer@0 {
> > > + compatible = "adi,adxl355";
> > > + reg = <0>;
> > > + spi-max-frequency = <1000000>;
> > > + interrupt-parent = <&gpio>;
> > > + interrupts = <25 IRQ_TYPE_EDGE_RISING>;
> > > + interrupt-names = "DRDY";
> > > + };
> > > + };
> >
>
--
Thanks and Regards
Yours Truly,
Puranjay Mohan
Powered by blists - more mailing lists