| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <CANk7y0gXwMPqAXDTcB-w9MiM=fwjQrSWauXnw9G-V2QohF=CAg@mail.gmail.com>
Date: Mon, 9 Aug 2021 13:16:58 +0530
From: Puranjay Mohan <puranjay12@...il.com>
To: "Hennerich, Michael" <Michael.Hennerich@...log.com>,
Jonathan Cameron <jic23@...nel.org>,
devicetree <devicetree@...r.kernel.org>,
linux-iio <linux-iio@...r.kernel.org>,
Linux Kernel Mailing List <linux-kernel@...r.kernel.org>,
Lars-Peter Clausen <lars@...afoo.de>,
"Bogdan, Dragos" <Dragos.Bogdan@...log.com>,
"Berghe, Darius" <Darius.Berghe@...log.com>
Subject: Re: [PATCH v9 2/2] iio: accel: adxl355: Add triggered buffer support
Please ignore this patch.
It was sent by mistake, it is not supposed to be a part of this series.
On Mon, Aug 9, 2021 at 1:15 PM Puranjay Mohan <puranjay12@...il.com> wrote:
>
> Provide a way for continuous data capture by setting up buffer support. The
> data ready signal exposed at the DRDY pin of the ADXL355 is exploited as
> a hardware interrupt which triggers to fill the buffer.
>
> Signed-off-by: Puranjay Mohan <puranjay12@...il.com>
> ---
> drivers/iio/accel/Kconfig | 4 ++
> drivers/iio/accel/adxl355.h | 2 +-
> drivers/iio/accel/adxl355_core.c | 102 ++++++++++++++++++++++++++++++-
> drivers/iio/accel/adxl355_i2c.c | 3 +-
> drivers/iio/accel/adxl355_spi.c | 2 +-
> 5 files changed, 108 insertions(+), 5 deletions(-)
>
> diff --git a/drivers/iio/accel/Kconfig b/drivers/iio/accel/Kconfig
> index d0c45c809..9c16c1841 100644
> --- a/drivers/iio/accel/Kconfig
> +++ b/drivers/iio/accel/Kconfig
> @@ -69,6 +69,8 @@ config ADXL355_I2C
> depends on I2C
> select ADXL355
> select REGMAP_I2C
> + select IIO_BUFFER
> + select IIO_TRIGGERED_BUFFER
> help
> Say Y here if you want to build i2c support for the Analog Devices
> ADXL355 3-axis digital accelerometer.
> @@ -82,6 +84,8 @@ config ADXL355_SPI
> depends on SPI
> select ADXL355
> select REGMAP_SPI
> + select IIO_BUFFER
> + select IIO_TRIGGERED_BUFFER
> help
> Say Y here if you want to build spi support for the Analog Devices
> ADXL355 3-axis digital accelerometer.
> diff --git a/drivers/iio/accel/adxl355.h b/drivers/iio/accel/adxl355.h
> index 322b0abb8..f0a376e6d 100644
> --- a/drivers/iio/accel/adxl355.h
> +++ b/drivers/iio/accel/adxl355.h
> @@ -15,5 +15,5 @@ extern const struct regmap_access_table adxl355_readable_regs_tbl;
> extern const struct regmap_access_table adxl355_writeable_regs_tbl;
>
> int adxl355_core_probe(struct device *dev, struct regmap *regmap,
> - const char *name);
> + const char *name, int irq);
> #endif /* _ADXL355_H_ */
> diff --git a/drivers/iio/accel/adxl355_core.c b/drivers/iio/accel/adxl355_core.c
> index d1163cde1..45397dcce 100644
> --- a/drivers/iio/accel/adxl355_core.c
> +++ b/drivers/iio/accel/adxl355_core.c
> @@ -9,6 +9,10 @@
>
> #include <asm/unaligned.h>
> #include <linux/bitfield.h>
> +#include <linux/iio/buffer.h>
> +#include <linux/iio/trigger.h>
> +#include <linux/iio/triggered_buffer.h>
> +#include <linux/iio/trigger_consumer.h>
> #include <linux/iio/iio.h>
> #include <linux/limits.h>
> #include <linux/math64.h>
> @@ -153,6 +157,7 @@ static const struct adxl355_chan_info adxl355_chans[] = {
> };
>
> struct adxl355_data {
> + int irq;
> struct regmap *regmap;
> struct device *dev;
> struct mutex lock; /* lock to protect op_mode */
> @@ -162,6 +167,12 @@ struct adxl355_data {
> int calibbias[3];
> int adxl355_hpf_3db_table[7][2];
> u8 transf_buf[3] ____cacheline_aligned;
> + struct iio_trigger *dready_trig;
> + /* Ensure correct alignment of timestamp when present */
> + struct {
> + __be32 channels[3];
> + s64 ts;
> + } buffer ____cacheline_aligned;
> };
>
> static int adxl355_set_op_mode(struct adxl355_data *data,
> @@ -493,12 +504,46 @@ static int adxl355_read_avail(struct iio_dev *indio_dev,
> }
> }
>
> +static const unsigned long adxl355_avail_scan_masks[] = {
> + GENMASK(3, 0),
> + 0
> +};
> +
> static const struct iio_info adxl355_info = {
> .read_raw = adxl355_read_raw,
> .write_raw = adxl355_write_raw,
> .read_avail = &adxl355_read_avail
> };
>
> +static const struct iio_trigger_ops adxl355_trigger_ops = {
> + .validate_device = &iio_trigger_validate_own_device,
> +};
> +
> +static irqreturn_t adxl355_trigger_handler(int irq, void *p)
> +{
> + struct iio_poll_func *pf = p;
> + struct iio_dev *indio_dev = pf->indio_dev;
> + struct adxl355_data *data = iio_priv(indio_dev);
> + int ret;
> +
> + mutex_lock(&data->lock);
> +
> + ret = regmap_bulk_read(data->regmap, ADXL355_XDATA3_REG,
> + data->buffer.channels,
> + 9);
> + if (ret)
> + goto out_unlock_notify;
> +
> + iio_push_to_buffers_with_timestamp(indio_dev, &data->buffer,
> + pf->timestamp);
> +
> +out_unlock_notify:
> + mutex_unlock(&data->lock);
> + iio_trigger_notify_done(indio_dev->trig);
> +
> + return IRQ_HANDLED;
> +}
> +
> #define ADXL355_ACCEL_CHANNEL(index, reg, axis) { \
> .type = IIO_ACCEL, \
> .address = reg, \
> @@ -512,6 +557,7 @@ static const struct iio_info adxl355_info = {
> .info_mask_shared_by_type_available = \
> BIT(IIO_CHAN_INFO_SAMP_FREQ) | \
> BIT(IIO_CHAN_INFO_HIGH_PASS_FILTER_3DB_FREQUENCY), \
> + .scan_index = index, \
> .scan_type = { \
> .sign = 's', \
> .realbits = 20, \
> @@ -531,17 +577,56 @@ static const struct iio_chan_spec adxl355_channels[] = {
> .info_mask_separate = BIT(IIO_CHAN_INFO_RAW) |
> BIT(IIO_CHAN_INFO_SCALE) |
> BIT(IIO_CHAN_INFO_OFFSET),
> + .scan_index = 3,
> .scan_type = {
> .sign = 's',
> .realbits = 12,
> .storagebits = 16,
> .endianness = IIO_BE,
> },
> - }
> + },
> + IIO_CHAN_SOFT_TIMESTAMP(4)
> };
>
> +static int adxl355_probe_trigger(struct iio_dev *indio_dev)
> +{
> + struct adxl355_data *data = iio_priv(indio_dev);
> + int ret;
> +
> + if (!data->irq) {
> + dev_info(data->dev, "no irq, using polling\n");
> + return 0;
> + }
> +
> + data->dready_trig = devm_iio_trigger_alloc(data->dev, "%s-dev%d",
> + indio_dev->name,
> + indio_dev->id);
> + if (!data->dready_trig)
> + return -ENOMEM;
> +
> + data->dready_trig->ops = &adxl355_trigger_ops;
> + iio_trigger_set_drvdata(data->dready_trig, indio_dev);
> +
> + ret = devm_request_irq(data->dev, data->irq,
> + &iio_trigger_generic_data_rdy_poll,
> + IRQF_ONESHOT, "adxl355_irq", data->dready_trig);
> + if (ret < 0)
> + return dev_err_probe(data->dev, ret, "request irq %d failed\n",
> + data->irq);
> +
> + ret = devm_iio_trigger_register(data->dev, data->dready_trig);
> + if (ret) {
> + dev_err(data->dev, "iio trigger register failed\n");
> + return ret;
> + }
> +
> + indio_dev->trig = iio_trigger_get(data->dready_trig);
> +
> + return 0;
> +}
> +
> int adxl355_core_probe(struct device *dev, struct regmap *regmap,
> - const char *name)
> + const char *name, int irq)
> {
> struct adxl355_data *data;
> struct iio_dev *indio_dev;
> @@ -554,6 +639,7 @@ int adxl355_core_probe(struct device *dev, struct regmap *regmap,
> data = iio_priv(indio_dev);
> data->regmap = regmap;
> data->dev = dev;
> + data->irq = irq;
> data->op_mode = ADXL355_STANDBY;
> mutex_init(&data->lock);
>
> @@ -562,6 +648,7 @@ int adxl355_core_probe(struct device *dev, struct regmap *regmap,
> indio_dev->modes = INDIO_DIRECT_MODE;
> indio_dev->channels = adxl355_channels;
> indio_dev->num_channels = ARRAY_SIZE(adxl355_channels);
> + indio_dev->available_scan_masks = adxl355_avail_scan_masks;
>
> ret = adxl355_setup(data);
> if (ret < 0) {
> @@ -569,6 +656,17 @@ int adxl355_core_probe(struct device *dev, struct regmap *regmap,
> return ret;
> }
>
> + ret = devm_iio_triggered_buffer_setup(dev, indio_dev,
> + &iio_pollfunc_store_time,
> + &adxl355_trigger_handler, NULL);
> + if (ret < 0)
> + return dev_err_probe(dev, ret,
> + "iio triggered buffer setup failed\n");
> +
> + ret = adxl355_probe_trigger(indio_dev);
> + if (ret < 0)
> + return ret;
> +
> return devm_iio_device_register(dev, indio_dev);
> }
> EXPORT_SYMBOL_GPL(adxl355_core_probe);
> diff --git a/drivers/iio/accel/adxl355_i2c.c b/drivers/iio/accel/adxl355_i2c.c
> index e3070ee81..c18521819 100644
> --- a/drivers/iio/accel/adxl355_i2c.c
> +++ b/drivers/iio/accel/adxl355_i2c.c
> @@ -31,7 +31,8 @@ static int adxl355_i2c_probe(struct i2c_client *client)
> return PTR_ERR(regmap);
> }
>
> - return adxl355_core_probe(&client->dev, regmap, client->name);
> + return adxl355_core_probe(&client->dev, regmap, client->name,
> + client->irq);
> }
>
> static const struct i2c_device_id adxl355_i2c_id[] = {
> diff --git a/drivers/iio/accel/adxl355_spi.c b/drivers/iio/accel/adxl355_spi.c
> index a16bd1407..f9ba153f6 100644
> --- a/drivers/iio/accel/adxl355_spi.c
> +++ b/drivers/iio/accel/adxl355_spi.c
> @@ -34,7 +34,7 @@ static int adxl355_spi_probe(struct spi_device *spi)
> return PTR_ERR(regmap);
> }
>
> - return adxl355_core_probe(&spi->dev, regmap, id->name);
> + return adxl355_core_probe(&spi->dev, regmap, id->name, spi->irq);
> }
>
> static const struct spi_device_id adxl355_spi_id[] = {
> --
> 2.30.1
>
--
Thanks and Regards
Yours Truly,
Puranjay Mohan
Powered by blists - more mailing lists