| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <cb22a3b2-5021-c246-d52b-dc6df78cd4c9@xs4all.nl>
Date: Mon, 9 Aug 2021 11:09:50 +0200
From: Hans Verkuil <hverkuil-cisco@...all.nl>
To: dillon.minfei@...il.com, mchehab@...nel.org,
mchehab+huawei@...nel.org, ezequiel@...labora.com,
gnurou@...il.com, pihsun@...omium.org, mcoquelin.stm32@...il.com,
alexandre.torgue@...s.st.com, mturquette@...libre.com,
sboyd@...nel.org, robh+dt@...nel.org
Cc: patrice.chotard@...s.st.com, hugues.fruchet@...s.st.com,
linux-media@...r.kernel.org, linux-kernel@...r.kernel.org,
linux-stm32@...md-mailman.stormreply.com,
linux-arm-kernel@...ts.infradead.org, linux-clk@...r.kernel.org,
devicetree@...r.kernel.org
Subject: Re: [PATCH v2 9/9] media: stm32-dma2d: STM32 DMA2D driver
On 15/07/2021 11:24, dillon.minfei@...il.com wrote:
> From: Dillon Min <dillon.minfei@...il.com>
>
> This V4L2 subdev m2m driver enables Chrom-Art Accelerator unit
> of STMicroelectronics STM32 SoC series.
>
> Currently support r2m, m2m, m2m_pfc functions.
> - r2m, Filling a part or the whole of a destination image with a specific
> color.
> - m2m, Copying a part or the whole of a source image into a part or the
> whole of a destination.
> - m2m_pfc, Copying a part or the whole of a source image into a part or the
> whole of a destination image with a pixel format conversion.
>
> Signed-off-by: Dillon Min <dillon.minfei@...il.com>
> ---
> v2: all the changes are based on Hans's review, thanks.
> - update Kconfig, replace ',' to 'and', add '.' at the description end,
> add COMPILE_TEST.
> - fix a lots of warrnings from checkpatch.pl --strict.
> - add const to formats[] and def_frame.
> - chage line_ofs to line_offset.
> - replace ctx->fg to ctx->cap.
> - change implemention of get_frame().
> - move the ioctls definition from the code to stm32-media.h.
> - change "Set to r2m mode" to "Set R2M Mode".
> - add decription for r2m, m2m, m2m_pfc.
>
> drivers/media/platform/Kconfig | 9 +
> drivers/media/platform/Makefile | 1 +
> drivers/media/platform/stm32/Makefile | 2 +
> drivers/media/platform/stm32/dma2d/dma2d-hw.c | 143 +++++
> drivers/media/platform/stm32/dma2d/dma2d-regs.h | 113 ++++
> drivers/media/platform/stm32/dma2d/dma2d.c | 796 ++++++++++++++++++++++++
> drivers/media/platform/stm32/dma2d/dma2d.h | 136 ++++
> 7 files changed, 1200 insertions(+)
> create mode 100644 drivers/media/platform/stm32/dma2d/dma2d-hw.c
> create mode 100644 drivers/media/platform/stm32/dma2d/dma2d-regs.h
> create mode 100644 drivers/media/platform/stm32/dma2d/dma2d.c
> create mode 100644 drivers/media/platform/stm32/dma2d/dma2d.h
>
> diff --git a/drivers/media/platform/Kconfig b/drivers/media/platform/Kconfig
> index 157c924686e4..4df18623e4ad 100644
> --- a/drivers/media/platform/Kconfig
> +++ b/drivers/media/platform/Kconfig
> @@ -473,6 +473,15 @@ config VIDEO_STI_DELTA_DRIVER
>
> endif # VIDEO_STI_DELTA
>
> +config VIDEO_STM32_DMA2D
> + tristate "STM32 Chrom-Art Accelerator (DMA2D)"
> + depends on (VIDEO_DEV && VIDEO_V4L2 && ARCH_STM32) || COMPILE_TEST
> + select VIDEOBUF2_DMA_CONTIG
> + select V4L2_MEM2MEM_DEV
> + help
> + The STM32 DMA2D is a memory-to-memory engine for pixel conversion
> + and specialized DMA dedicated to image manipulation.
> +
> config VIDEO_RENESAS_FDP1
> tristate "Renesas Fine Display Processor"
> depends on VIDEO_DEV && VIDEO_V4L2
> diff --git a/drivers/media/platform/Makefile b/drivers/media/platform/Makefile
> index 73ce083c2fc6..46f1c05bc576 100644
> --- a/drivers/media/platform/Makefile
> +++ b/drivers/media/platform/Makefile
> @@ -70,6 +70,7 @@ obj-$(CONFIG_VIDEO_ATMEL_ISI) += atmel/
> obj-$(CONFIG_VIDEO_ATMEL_XISC) += atmel/
>
> obj-$(CONFIG_VIDEO_STM32_DCMI) += stm32/
> +obj-$(CONFIG_VIDEO_STM32_DMA2D) += stm32/
>
> obj-$(CONFIG_VIDEO_MEDIATEK_VPU) += mtk-vpu/
>
> diff --git a/drivers/media/platform/stm32/Makefile b/drivers/media/platform/stm32/Makefile
> index 48b36db2c2e2..896ef98a73ab 100644
> --- a/drivers/media/platform/stm32/Makefile
> +++ b/drivers/media/platform/stm32/Makefile
> @@ -1,2 +1,4 @@
> # SPDX-License-Identifier: GPL-2.0-only
> obj-$(CONFIG_VIDEO_STM32_DCMI) += stm32-dcmi.o
> +stm32-dma2d-objs := dma2d/dma2d.o dma2d/dma2d-hw.o
> +obj-$(CONFIG_VIDEO_STM32_DMA2D) += stm32-dma2d.o
> diff --git a/drivers/media/platform/stm32/dma2d/dma2d-hw.c b/drivers/media/platform/stm32/dma2d/dma2d-hw.c
> new file mode 100644
> index 000000000000..8c1c664ab13b
> --- /dev/null
> +++ b/drivers/media/platform/stm32/dma2d/dma2d-hw.c
> @@ -0,0 +1,143 @@
> +// SPDX-License-Identifier: GPL-2.0-or-later
> +/*
> + * ST stm32 Chrom-Art - 2D Graphics Accelerator Driver
> + *
> + * Copyright (c) 2021 Dillon Min
> + * Dillon Min, <dillon.minfei@...il.com>
> + *
> + * based on s5p-g2d
> + *
> + * Copyright (c) 2011 Samsung Electronics Co., Ltd.
> + * Kamil Debski, <k.debski@...sung.com>
> + */
> +
> +#include <linux/io.h>
> +
> +#include "dma2d.h"
> +#include "dma2d-regs.h"
> +
> +static inline u32 reg_read(void __iomem *base, u32 reg)
> +{
> + return readl_relaxed(base + reg);
> +}
> +
> +static inline void reg_write(void __iomem *base, u32 reg, u32 val)
> +{
> + writel_relaxed(val, base + reg);
> +}
> +
> +static inline void reg_set(void __iomem *base, u32 reg, u32 mask)
> +{
> + reg_write(base, reg, reg_read(base, reg) | mask);
> +}
> +
> +static inline void reg_clear(void __iomem *base, u32 reg, u32 mask)
> +{
> + reg_write(base, reg, reg_read(base, reg) & ~mask);
> +}
> +
> +static inline void reg_update_bits(void __iomem *base, u32 reg, u32 mask,
> + u32 val)
> +{
> + reg_write(base, reg, (reg_read(base, reg) & ~mask) | val);
> +}
> +
> +void dma2d_start(struct dma2d_dev *d)
> +{
> + reg_update_bits(d->regs, DMA2D_CR_REG, CR_START, CR_START);
> +}
> +
> +u32 dma2d_get_int(struct dma2d_dev *d)
> +{
> + return reg_read(d->regs, DMA2D_ISR_REG);
> +}
> +
> +void dma2d_clear_int(struct dma2d_dev *d)
> +{
> + u32 isr_val = reg_read(d->regs, DMA2D_ISR_REG);
> +
> + reg_write(d->regs, DMA2D_IFCR_REG, isr_val & 0x003f);
> +}
> +
> +void dma2d_config_common(struct dma2d_dev *d, enum dma2d_op_mode op_mode,
> + u16 width, u16 height)
> +{
> + reg_update_bits(d->regs, DMA2D_CR_REG, CR_MODE_MASK,
> + op_mode << CR_MODE_SHIFT);
> +
> + reg_write(d->regs, DMA2D_NLR_REG, (width << 16) | height);
> +}
> +
> +void dma2d_config_out(struct dma2d_dev *d, struct dma2d_frame *frm,
> + dma_addr_t o_addr)
> +{
> + reg_update_bits(d->regs, DMA2D_CR_REG, CR_CEIE, CR_CEIE);
> + reg_update_bits(d->regs, DMA2D_CR_REG, CR_CTCIE, CR_CTCIE);
> + reg_update_bits(d->regs, DMA2D_CR_REG, CR_CAEIE, CR_CAEIE);
> + reg_update_bits(d->regs, DMA2D_CR_REG, CR_TCIE, CR_TCIE);
> + reg_update_bits(d->regs, DMA2D_CR_REG, CR_TEIE, CR_TEIE);
> +
> + if (frm->fmt->cmode >= CM_MODE_ARGB8888 &&
> + frm->fmt->cmode <= CM_MODE_ARGB4444)
> + reg_update_bits(d->regs, DMA2D_OPFCCR_REG, OPFCCR_CM_MASK,
> + frm->fmt->cmode);
> +
> + reg_write(d->regs, DMA2D_OMAR_REG, o_addr);
> +
> + reg_write(d->regs, DMA2D_OCOLR_REG,
> + (frm->a_rgb[3] << 24) |
> + (frm->a_rgb[2] << 16) |
> + (frm->a_rgb[1] << 8) |
> + frm->a_rgb[0]);
> +
> + reg_update_bits(d->regs, DMA2D_OOR_REG, OOR_LO_MASK,
> + frm->line_offset & 0x3fff);
> +}
> +
> +void dma2d_config_fg(struct dma2d_dev *d, struct dma2d_frame *frm,
> + dma_addr_t f_addr)
> +{
> + reg_write(d->regs, DMA2D_FGMAR_REG, f_addr);
> + reg_update_bits(d->regs, DMA2D_FGOR_REG, FGOR_LO_MASK,
> + frm->line_offset);
> +
> + if (frm->fmt->cmode >= CM_MODE_ARGB8888 &&
> + frm->fmt->cmode <= CM_MODE_A4)
> + reg_update_bits(d->regs, DMA2D_FGPFCCR_REG, FGPFCCR_CM_MASK,
> + frm->fmt->cmode);
> +
> + reg_update_bits(d->regs, DMA2D_FGPFCCR_REG, FGPFCCR_AM_MASK,
> + (frm->a_mode << 16) & 0x03);
> +
> + reg_update_bits(d->regs, DMA2D_FGPFCCR_REG, FGPFCCR_ALPHA_MASK,
> + frm->a_rgb[3] << 24);
> +
> + reg_write(d->regs, DMA2D_FGCOLR_REG,
> + (frm->a_rgb[2] << 16) |
> + (frm->a_rgb[1] << 8) |
> + frm->a_rgb[0]);
> +}
> +
> +void dma2d_config_bg(struct dma2d_dev *d, struct dma2d_frame *frm,
> + dma_addr_t b_addr)
> +{
> + reg_write(d->regs, DMA2D_BGMAR_REG, b_addr);
> + reg_update_bits(d->regs, DMA2D_BGOR_REG, BGOR_LO_MASK,
> + frm->line_offset);
> +
> + if (frm->fmt->cmode >= CM_MODE_ARGB8888 &&
> + frm->fmt->cmode <= CM_MODE_A4)
> + reg_update_bits(d->regs, DMA2D_BGPFCCR_REG, BGPFCCR_CM_MASK,
> + frm->fmt->cmode);
> +
> + reg_update_bits(d->regs, DMA2D_BGPFCCR_REG, BGPFCCR_AM_MASK,
> + (frm->a_mode << 16) & 0x03);
> +
> + reg_update_bits(d->regs, DMA2D_BGPFCCR_REG, BGPFCCR_ALPHA_MASK,
> + frm->a_rgb[3] << 24);
> +
> + reg_write(d->regs, DMA2D_BGCOLR_REG,
> + (frm->a_rgb[2] << 16) |
> + (frm->a_rgb[1] << 8) |
> + frm->a_rgb[0]);
> +}
> diff --git a/drivers/media/platform/stm32/dma2d/dma2d-regs.h b/drivers/media/platform/stm32/dma2d/dma2d-regs.h
> new file mode 100644
> index 000000000000..2128364406c8
> --- /dev/null
> +++ b/drivers/media/platform/stm32/dma2d/dma2d-regs.h
> @@ -0,0 +1,113 @@
> +/* SPDX-License-Identifier: GPL-2.0-or-later */
> +/*
> + * ST stm32 Chrom-Art - 2D Graphics Accelerator Driver
> + *
> + * Copyright (c) 2021 Dillon Min
> + * Dillon Min, <dillon.minfei@...il.com>
> + *
> + * based on s5p-g2d
> + *
> + * Copyright (c) 2011 Samsung Electronics Co., Ltd.
> + * Kamil Debski, <k.debski@...sung.com>
> + */
> +
> +#ifndef __DMA2D_REGS_H__
> +#define __DMA2D_REGS_H__
> +
> +#define DMA2D_CR_REG 0x0000
> +#define CR_MODE_MASK GENMASK(17, 16)
> +#define CR_MODE_SHIFT 16
> +#define CR_M2M 0x0000
> +#define CR_M2M_PFC BIT(16)
> +#define CR_M2M_BLEND BIT(17)
> +#define CR_R2M (BIT(17) | BIT(16))
> +#define CR_CEIE BIT(13)
> +#define CR_CTCIE BIT(12)
> +#define CR_CAEIE BIT(11)
> +#define CR_TWIE BIT(10)
> +#define CR_TCIE BIT(9)
> +#define CR_TEIE BIT(8)
> +#define CR_ABORT BIT(2)
> +#define CR_SUSP BIT(1)
> +#define CR_START BIT(0)
> +
> +#define DMA2D_ISR_REG 0x0004
> +#define ISR_CEIF BIT(5)
> +#define ISR_CTCIF BIT(4)
> +#define ISR_CAEIF BIT(3)
> +#define ISR_TWIF BIT(2)
> +#define ISR_TCIF BIT(1)
> +#define ISR_TEIF BIT(0)
> +
> +#define DMA2D_IFCR_REG 0x0008
> +#define IFCR_CCEIF BIT(5)
> +#define IFCR_CCTCIF BIT(4)
> +#define IFCR_CAECIF BIT(3)
> +#define IFCR_CTWIF BIT(2)
> +#define IFCR_CTCIF BIT(1)
> +#define IFCR_CTEIF BIT(0)
> +
> +#define DMA2D_FGMAR_REG 0x000c
> +#define DMA2D_FGOR_REG 0x0010
> +#define FGOR_LO_MASK GENMASK(13, 0)
> +
> +#define DMA2D_BGMAR_REG 0x0014
> +#define DMA2D_BGOR_REG 0x0018
> +#define BGOR_LO_MASK GENMASK(13, 0)
> +
> +#define DMA2D_FGPFCCR_REG 0x001c
> +#define FGPFCCR_ALPHA_MASK GENMASK(31, 24)
> +#define FGPFCCR_AM_MASK GENMASK(17, 16)
> +#define FGPFCCR_CS_MASK GENMASK(15, 8)
> +#define FGPFCCR_START BIT(5)
> +#define FGPFCCR_CCM_RGB888 BIT(4)
> +#define FGPFCCR_CM_MASK GENMASK(3, 0)
> +
> +#define DMA2D_FGCOLR_REG 0x0020
> +#define FGCOLR_REG_MASK GENMASK(23, 16)
> +#define FGCOLR_GREEN_MASK GENMASK(15, 8)
> +#define FGCOLR_BLUE_MASK GENMASK(7, 0)
> +
> +#define DMA2D_BGPFCCR_REG 0x0024
> +#define BGPFCCR_ALPHA_MASK GENMASK(31, 24)
> +#define BGPFCCR_AM_MASK GENMASK(17, 16)
> +#define BGPFCCR_CS_MASK GENMASK(15, 8)
> +#define BGPFCCR_START BIT(5)
> +#define BGPFCCR_CCM_RGB888 BIT(4)
> +#define BGPFCCR_CM_MASK GENMASK(3, 0)
> +
> +#define DMA2D_BGCOLR_REG 0x0028
> +#define BGCOLR_REG_MASK GENMASK(23, 16)
> +#define BGCOLR_GREEN_MASK GENMASK(15, 8)
> +#define BGCOLR_BLUE_MASK GENMASK(7, 0)
> +
> +#define DMA2D_OPFCCR_REG 0x0034
> +#define OPFCCR_CM_MASK GENMASK(2, 0)
> +
> +#define DMA2D_OCOLR_REG 0x0038
> +#define OCOLR_ALPHA_MASK GENMASK(31, 24)
> +#define OCOLR_RED_MASK GENMASK(23, 16)
> +#define OCOLR_GREEN_MASK GENMASK(15, 8)
> +#define OCOLR_BLUE_MASK GENMASK(7, 0)
> +
> +#define DMA2D_OMAR_REG 0x003c
> +
> +#define DMA2D_OOR_REG 0x0040
> +#define OOR_LO_MASK GENMASK(13, 0)
> +
> +#define DMA2D_NLR_REG 0x0044
> +#define NLR_PL_MASK GENMASK(29, 16)
> +#define NLR_NL_MASK GENMASK(15, 0)
> +
> +/* Hardware limits */
> +#define MAX_WIDTH 0x3fff
> +#define MAX_HEIGHT 0xffff
> +
> +#define DEFAULT_WIDTH 240
> +#define DEFAULT_HEIGHT 320
> +#define DEFAULT_SIZE 307200
> +
> +#define CM_MODE_ARGB8888 0x00
> +#define CM_MODE_ARGB4444 0x04
> +#define CM_MODE_A4 0x0a
> +#endif /* __DMA2D_REGS_H__ */
> diff --git a/drivers/media/platform/stm32/dma2d/dma2d.c b/drivers/media/platform/stm32/dma2d/dma2d.c
> new file mode 100644
> index 000000000000..f41f94dfb7b7
> --- /dev/null
> +++ b/drivers/media/platform/stm32/dma2d/dma2d.c
> @@ -0,0 +1,796 @@
> +// SPDX-License-Identifier: GPL-2.0-or-later
> +/*
> + * STM32 DMA2D - 2D Graphics Accelerator Driver
> + *
> + * Copyright (c) 2021 Dillon Min
> + * Dillon Min, <dillon.minfei@...il.com>
> + *
> + * based on s5p-g2d
> + *
> + * Copyright (c) 2011 Samsung Electronics Co., Ltd.
> + * Kamil Debski, <k.debski@...sung.com>
> + */
> +
> +#include <linux/module.h>
> +#include <linux/fs.h>
> +#include <linux/timer.h>
> +#include <linux/sched.h>
> +#include <linux/slab.h>
> +#include <linux/clk.h>
> +#include <linux/interrupt.h>
> +#include <linux/of.h>
> +
> +#include <linux/platform_device.h>
> +#include <media/v4l2-mem2mem.h>
> +#include <media/v4l2-device.h>
> +#include <media/v4l2-ioctl.h>
> +#include <media/v4l2-event.h>
> +#include <media/videobuf2-v4l2.h>
> +#include <media/videobuf2-dma-contig.h>
> +#include <uapi/linux/stm32-media.h>
> +
> +#include "dma2d.h"
> +#include "dma2d-regs.h"
> +
> +/*
> + * This V4L2 subdev m2m driver enables Chrom-Art Accelerator unit
> + * of STMicroelectronics STM32 SoC series.
> + *
> + * Currently support r2m, m2m, m2m_pfc.
> + *
> + * - r2m, Filling a part or the whole of a destination image with a specific
> + * color.
> + * - m2m, Copying a part or the whole of a source image into a part or the
> + * whole of a destination.
> + * - m2m_pfc, Copying a part or the whole of a source image into a part or the
> + * whole of a destination image with a pixel format conversion.
> + */
> +
> +#define fh2ctx(__fh) container_of(__fh, struct dma2d_ctx, fh)
> +
> +static const struct dma2d_fmt formats[] = {
> + {
> + .fourcc = V4L2_PIX_FMT_ARGB32,
> + .cmode = DMA2D_CMODE_ARGB8888,
> + .depth = 32,
> + },
> + {
> + .fourcc = V4L2_PIX_FMT_RGB24,
> + .cmode = DMA2D_CMODE_RGB888,
> + .depth = 24,
> + },
> + {
> + .fourcc = V4L2_PIX_FMT_RGB565,
> + .cmode = DMA2D_CMODE_RGB565,
> + .depth = 16,
> + },
> + {
> + .fourcc = V4L2_PIX_FMT_ARGB555,
> + .cmode = DMA2D_CMODE_ARGB1555,
> + .depth = 16,
> + },
> + {
> + .fourcc = V4L2_PIX_FMT_ARGB444,
> + .cmode = DMA2D_CMODE_ARGB4444,
> + .depth = 16,
> + },
> +};
> +
> +#define NUM_FORMATS ARRAY_SIZE(formats)
> +
> +static const struct dma2d_frame def_frame = {
> + .width = DEFAULT_WIDTH,
> + .height = DEFAULT_HEIGHT,
> + .line_offset = 0,
> + .a_rgb = {0x00, 0x00, 0x00, 0xff},
> + .a_mode = DMA2D_ALPHA_MODE_NO_MODIF,
> + .fmt = (struct dma2d_fmt *)&formats[0],
> + .size = DEFAULT_SIZE,
> +};
> +
> +static struct dma2d_fmt *find_fmt(int pixelformat)
> +{
> + unsigned int i;
> +
> + for (i = 0; i < NUM_FORMATS; i++) {
> + if (formats[i].fourcc == pixelformat)
> + return (struct dma2d_fmt *)&formats[i];
> + }
> +
> + return NULL;
> +}
> +
> +static struct dma2d_frame *get_frame(struct dma2d_ctx *ctx,
> + enum v4l2_buf_type type)
> +{
> + return V4L2_TYPE_IS_OUTPUT(type) ? &ctx->cap : &ctx->out;
> +}
> +
> +static int dma2d_queue_setup(struct vb2_queue *vq,
> + unsigned int *nbuffers, unsigned int *nplanes,
> + unsigned int sizes[], struct device *alloc_devs[])
> +{
> + struct dma2d_ctx *ctx = vb2_get_drv_priv(vq);
> + struct dma2d_frame *f = get_frame(ctx, vq->type);
> +
> + if (IS_ERR(f))
> + return PTR_ERR(f);
Why this check? get_frame() doesn't return an error pointer, it always succeeds.
Just drop this.
> +
> + if (*nplanes)
> + return sizes[0] < f->size ? -EINVAL : 0;
> +
> + sizes[0] = f->size;
> + *nplanes = 1;
> +
> + if (*nbuffers == 0)
> + *nbuffers = 1;
*nbuffers can never be 0, so you can drop this check.
> +
> + return 0;
> +}
> +
> +static int dma2d_buf_out_validate(struct vb2_buffer *vb)
> +{
> + struct vb2_v4l2_buffer *vbuf = to_vb2_v4l2_buffer(vb);
> +
> + if (vbuf->field == V4L2_FIELD_ANY)
> + vbuf->field = V4L2_FIELD_NONE;
> + if (vbuf->field != V4L2_FIELD_NONE)
> + return -EINVAL;
> +
> + return 0;
> +}
> +
> +static int dma2d_buf_prepare(struct vb2_buffer *vb)
> +{
> + struct dma2d_ctx *ctx = vb2_get_drv_priv(vb->vb2_queue);
> + struct dma2d_frame *f = get_frame(ctx, vb->vb2_queue->type);
> +
> + if (IS_ERR(f))
> + return PTR_ERR(f);
Drop this check.
> +
> + if (vb2_plane_size(vb, 0) < f->size)
> + return -EINVAL;
> +
> + vb2_set_plane_payload(vb, 0, f->size);
> +
> + return 0;
> +}
> +
> +static void dma2d_buf_queue(struct vb2_buffer *vb)
> +{
> + struct vb2_v4l2_buffer *vbuf = to_vb2_v4l2_buffer(vb);
> + struct dma2d_ctx *ctx = vb2_get_drv_priv(vb->vb2_queue);
> +
> + v4l2_m2m_buf_queue(ctx->fh.m2m_ctx, vbuf);
> +}
> +
> +static int dma2d_start_streaming(struct vb2_queue *q, unsigned int count)
> +{
> + struct dma2d_ctx *ctx = vb2_get_drv_priv(q);
> + struct dma2d_frame *f = get_frame(ctx, q->type);
> +
> + if (IS_ERR(f))
> + return -EINVAL;
Drop check.
> +
> + f->sequence = 0;
> + return 0;
> +}
> +
> +static void dma2d_stop_streaming(struct vb2_queue *q)
> +{
> + struct dma2d_ctx *ctx = vb2_get_drv_priv(q);
> + struct vb2_v4l2_buffer *vbuf;
> +
> + for (;;) {
> + if (V4L2_TYPE_IS_OUTPUT(q->type))
> + vbuf = v4l2_m2m_src_buf_remove(ctx->fh.m2m_ctx);
> + else
> + vbuf = v4l2_m2m_dst_buf_remove(ctx->fh.m2m_ctx);
> + if (!vbuf)
> + return;
> + v4l2_m2m_buf_done(vbuf, VB2_BUF_STATE_ERROR);
> + }
> +}
> +
> +static const struct vb2_ops dma2d_qops = {
> + .queue_setup = dma2d_queue_setup,
> + .buf_out_validate = dma2d_buf_out_validate,
> + .buf_prepare = dma2d_buf_prepare,
> + .buf_queue = dma2d_buf_queue,
> + .start_streaming = dma2d_start_streaming,
> + .stop_streaming = dma2d_stop_streaming,
> + .wait_prepare = vb2_ops_wait_prepare,
> + .wait_finish = vb2_ops_wait_finish,
> +};
> +
> +static int queue_init(void *priv, struct vb2_queue *src_vq,
> + struct vb2_queue *dst_vq)
> +{
> + struct dma2d_ctx *ctx = priv;
> + int ret;
> +
> + src_vq->type = V4L2_BUF_TYPE_VIDEO_OUTPUT;
> + src_vq->io_modes = VB2_MMAP | VB2_DMABUF;
> + src_vq->drv_priv = ctx;
> + src_vq->ops = &dma2d_qops;
> + src_vq->mem_ops = &vb2_dma_contig_memops;
> + src_vq->buf_struct_size = sizeof(struct v4l2_m2m_buffer);
> + src_vq->timestamp_flags = V4L2_BUF_FLAG_TIMESTAMP_COPY;
> + src_vq->lock = &ctx->dev->mutex;
> + src_vq->dev = ctx->dev->v4l2_dev.dev;
> +
> + ret = vb2_queue_init(src_vq);
> + if (ret)
> + return ret;
> +
> + dst_vq->type = V4L2_BUF_TYPE_VIDEO_CAPTURE;
> + dst_vq->io_modes = VB2_MMAP | VB2_DMABUF;
> + dst_vq->drv_priv = ctx;
> + dst_vq->ops = &dma2d_qops;
> + dst_vq->mem_ops = &vb2_dma_contig_memops;
> + dst_vq->buf_struct_size = sizeof(struct v4l2_m2m_buffer);
> + dst_vq->timestamp_flags = V4L2_BUF_FLAG_TIMESTAMP_COPY;
> + dst_vq->lock = &ctx->dev->mutex;
> + dst_vq->dev = ctx->dev->v4l2_dev.dev;
> +
> + return vb2_queue_init(dst_vq);
> +}
> +
> +static int dma2d_s_ctrl(struct v4l2_ctrl *ctrl)
> +{
> + struct dma2d_frame *frm;
> + struct dma2d_ctx *ctx = container_of(ctrl->handler, struct dma2d_ctx,
> + ctrl_handler);
> + unsigned long flags;
> +
> + spin_lock_irqsave(&ctx->dev->ctrl_lock, flags);
> + switch (ctrl->id) {
> + case V4L2_CID_ALPHA_COMPONENT:
> + /* set the background alpha value*/
> + ctx->alpha_component = (u8)ctrl->val;
It's set here, but is never used?!
> + break;
> + case V4L2_CID_DMA2D_R2M_COLOR:
> + frm = get_frame(ctx, V4L2_BUF_TYPE_VIDEO_CAPTURE);
> + frm->a_rgb[2] = (ctrl->val >> 16) & 0xff;
> + frm->a_rgb[1] = (ctrl->val >> 8) & 0xff;
> + frm->a_rgb[0] = ctrl->val & 0xff;
Hmm, the alpha value isn't copied, but that's documented in V4L2_CID_DMA2D_R2M_COLOR.
Either this code or the documentation is wrong.
> + break;
> + case V4L2_CID_DMA2D_R2M_MODE:
> + if (ctrl->val)
> + ctx->op_mode = DMA2D_MODE_R2M;
> + break;
> + default:
> + v4l2_err(&ctx->dev->v4l2_dev, "Invalid control\n");
> + spin_unlock_irqrestore(&ctx->dev->ctrl_lock, flags);
> + return -EINVAL;
> + }
> + spin_unlock_irqrestore(&ctx->dev->ctrl_lock, flags);
> +
> + return 0;
> +}
> +
> +static const struct v4l2_ctrl_ops dma2d_ctrl_ops = {
> + .s_ctrl = dma2d_s_ctrl,
> +};
> +
> +static const struct v4l2_ctrl_config dma2d_r2m_control[] = {
> + {
> + .ops = &dma2d_ctrl_ops,
> + .id = V4L2_CID_DMA2D_R2M_COLOR,
> + .name = "R2M Alpha/Color Value",
This mentions alpha support as well. Very unclear how this relates to V4L2_CID_ALPHA_COMPONENT.
> + .type = V4L2_CTRL_TYPE_INTEGER,
> + .min = 0xffffffff80000000ULL,
> + .max = 0x7fffffff,
I suggest using TYPE_BITMASK: it's more appropriate for a control like this.
(Yes, there are other color controls that are of type integer, but they predate
the introduction of type bitmask).
> + .def = 0,
> + .step = 1,
> + },
> + {
> + .ops = &dma2d_ctrl_ops,
> + .id = V4L2_CID_DMA2D_R2M_MODE,
> + .name = "Set R2M Mode",
> + .type = V4L2_CTRL_TYPE_BOOLEAN,
> + .min = 0,
> + .max = 1,
> + .def = 0,
> + .step = 1,
> + }
> +};
It's not clear what R2M mode does. Is it just to enable filling the colors? Or will
there be other features in the future?
As it is now, this feature can instead be implemented by adding a new color effect
(see V4L2_CID_COLORFX): V4L2_COLORFX_SET_COLOR_ARGB.
And add a new bitmask control V4L2_CID_COLORFX_ARGB to set the ARGB value.
> +
> +static int dma2d_setup_ctrls(struct dma2d_ctx *ctx)
> +{
> + v4l2_ctrl_handler_init(&ctx->ctrl_handler, 3);
> +
> + v4l2_ctrl_new_std(&ctx->ctrl_handler, &dma2d_ctrl_ops,
> + V4L2_CID_ALPHA_COMPONENT, 0, 255, 1, 255);
> + v4l2_ctrl_new_custom(&ctx->ctrl_handler, &dma2d_r2m_control[0], NULL);
> + v4l2_ctrl_new_custom(&ctx->ctrl_handler, &dma2d_r2m_control[1], NULL);
> +
> + return 0;
> +}
> +
> +static int dma2d_open(struct file *file)
> +{
> + struct dma2d_dev *dev = video_drvdata(file);
> + struct dma2d_ctx *ctx = NULL;
> + int ret = 0;
> +
> + ctx = kzalloc(sizeof(*ctx), GFP_KERNEL);
> + if (!ctx)
> + return -ENOMEM;
> + ctx->dev = dev;
> + /* Set default formats */
> + ctx->cap = def_frame;
> + ctx->bg = def_frame;
> + ctx->out = def_frame;
> + ctx->op_mode = DMA2D_MODE_M2M_FPC;
> + ctx->colorspace = V4L2_COLORSPACE_REC709;
> + ctx->alpha_component = 0x00;
> + if (mutex_lock_interruptible(&dev->mutex)) {
> + kfree(ctx);
> + return -ERESTARTSYS;
> + }
> +
> + ctx->fh.m2m_ctx = v4l2_m2m_ctx_init(dev->m2m_dev, ctx, &queue_init);
> + if (IS_ERR(ctx->fh.m2m_ctx)) {
> + ret = PTR_ERR(ctx->fh.m2m_ctx);
> + mutex_unlock(&dev->mutex);
> + kfree(ctx);
> + return ret;
> + }
> +
> + v4l2_fh_init(&ctx->fh, video_devdata(file));
> + file->private_data = &ctx->fh;
> + v4l2_fh_add(&ctx->fh);
> +
> + dma2d_setup_ctrls(ctx);
> +
> + /* Write the default values to the ctx struct */
> + v4l2_ctrl_handler_setup(&ctx->ctrl_handler);
> +
> + ctx->fh.ctrl_handler = &ctx->ctrl_handler;
> + mutex_unlock(&dev->mutex);
> +
> + return 0;
> +}
> +
> +static int dma2d_release(struct file *file)
> +{
> + struct dma2d_dev *dev = video_drvdata(file);
> + struct dma2d_ctx *ctx = fh2ctx(file->private_data);
> +
> + v4l2_ctrl_handler_free(&ctx->ctrl_handler);
> + v4l2_fh_del(&ctx->fh);
> + v4l2_fh_exit(&ctx->fh);
> + mutex_lock(&dev->mutex);
> + v4l2_m2m_ctx_release(ctx->fh.m2m_ctx);
> + mutex_unlock(&dev->mutex);
> + kfree(ctx);
> +
> + return 0;
> +}
> +
> +static int vidioc_querycap(struct file *file, void *priv,
> + struct v4l2_capability *cap)
> +{
> + strscpy(cap->driver, DMA2D_NAME, sizeof(cap->driver));
> + strscpy(cap->card, DMA2D_NAME, sizeof(cap->card));
> + strscpy(cap->bus_info, BUS_INFO, sizeof(cap->bus_info));
> +
> + return 0;
> +}
> +
> +static int vidioc_enum_fmt(struct file *file, void *prv, struct v4l2_fmtdesc *f)
> +{
> + if (f->index >= NUM_FORMATS)
> + return -EINVAL;
> +
> + f->pixelformat = formats[f->index].fourcc;
> + return 0;
> +}
> +
> +static int vidioc_g_fmt(struct file *file, void *prv, struct v4l2_format *f)
> +{
> + struct dma2d_ctx *ctx = prv;
> + struct vb2_queue *vq;
> + struct dma2d_frame *frm;
> +
> + vq = v4l2_m2m_get_vq(ctx->fh.m2m_ctx, f->type);
> + if (!vq)
> + return -EINVAL;
> +
> + frm = get_frame(ctx, f->type);
> + if (IS_ERR(frm))
> + return PTR_ERR(frm);
> +
> + f->fmt.pix.width = frm->width;
> + f->fmt.pix.height = frm->height;
> + f->fmt.pix.field = V4L2_FIELD_NONE;
> + f->fmt.pix.pixelformat = frm->fmt->fourcc;
> + f->fmt.pix.bytesperline = (frm->width * frm->fmt->depth) >> 3;
> + f->fmt.pix.sizeimage = frm->size;
> + f->fmt.pix.colorspace = ctx->colorspace;
> + f->fmt.pix.xfer_func = ctx->xfer_func;
> + f->fmt.pix.ycbcr_enc = ctx->ycbcr_enc;
> + f->fmt.pix.quantization = ctx->quant;
> +
> + return 0;
> +}
> +
> +static int vidioc_try_fmt(struct file *file, void *prv, struct v4l2_format *f)
> +{
> + struct dma2d_ctx *ctx = prv;
> + struct dma2d_dev *dev = ctx->dev;
> + struct dma2d_fmt *fmt;
> + enum v4l2_field *field;
> + u32 fourcc = f->fmt.pix.pixelformat;
> +
> + fmt = find_fmt(fourcc);
> + if (!fmt) {
> + v4l2_warn(&dev->v4l2_dev,
> + "Format not supported: %c%c%c%c, use the default.\n",
> + (fourcc & 0xff), (fourcc >> 8) & 0xff,
> + (fourcc >> 16) & 0xff, (fourcc >> 24) & 0xff);
> + f->fmt.pix.pixelformat = formats[0].fourcc;
> + fmt = find_fmt(f->fmt.pix.pixelformat);
> + }
> +
> + field = &f->fmt.pix.field;
> + if (*field == V4L2_FIELD_ANY)
> + *field = V4L2_FIELD_NONE;
> + else if (*field != V4L2_FIELD_NONE)
> + return -EINVAL;
> +
> + if (f->fmt.pix.width > MAX_WIDTH)
> + f->fmt.pix.width = MAX_WIDTH;
> + if (f->fmt.pix.height > MAX_HEIGHT)
> + f->fmt.pix.height = MAX_HEIGHT;
> +
> + if (f->fmt.pix.width < 1)
> + f->fmt.pix.width = 1;
> + if (f->fmt.pix.height < 1)
> + f->fmt.pix.height = 1;
> +
> + if (f->type == V4L2_BUF_TYPE_VIDEO_OUTPUT && !f->fmt.pix.colorspace) {
> + f->fmt.pix.colorspace = V4L2_COLORSPACE_REC709;
> + } else if (f->type == V4L2_BUF_TYPE_VIDEO_CAPTURE) {
> + f->fmt.pix.colorspace = ctx->colorspace;
> + f->fmt.pix.xfer_func = ctx->xfer_func;
> + f->fmt.pix.ycbcr_enc = ctx->ycbcr_enc;
> + f->fmt.pix.quantization = ctx->quant;
> + }
> + f->fmt.pix.bytesperline = (f->fmt.pix.width * fmt->depth) >> 3;
> + f->fmt.pix.sizeimage = f->fmt.pix.height * f->fmt.pix.bytesperline;
> +
> + return 0;
> +}
> +
> +static int vidioc_s_fmt(struct file *file, void *prv, struct v4l2_format *f)
> +{
> + struct dma2d_ctx *ctx = prv;
> + struct dma2d_dev *dev = ctx->dev;
> + struct vb2_queue *vq;
> + struct dma2d_frame *frm;
> + struct dma2d_fmt *fmt;
> + int ret = 0;
> +
> + /* Adjust all values accordingly to the hardware capabilities
> + * and chosen format.
> + */
> + ret = vidioc_try_fmt(file, prv, f);
> + if (ret)
> + return ret;
> +
> + vq = v4l2_m2m_get_vq(ctx->fh.m2m_ctx, f->type);
> + if (vb2_is_busy(vq)) {
> + v4l2_err(&dev->v4l2_dev, "queue (%d) bust\n", f->type);
> + return -EBUSY;
> + }
> +
> + frm = get_frame(ctx, f->type);
> + if (IS_ERR(frm))
> + return PTR_ERR(frm);
> +
> + fmt = find_fmt(f->fmt.pix.pixelformat);
> + if (!fmt)
> + return -EINVAL;
> +
> + if (f->type == V4L2_BUF_TYPE_VIDEO_OUTPUT) {
> + ctx->colorspace = f->fmt.pix.colorspace;
> + ctx->xfer_func = f->fmt.pix.xfer_func;
> + ctx->ycbcr_enc = f->fmt.pix.ycbcr_enc;
> + ctx->quant = f->fmt.pix.quantization;
> + }
> +
> + frm->width = f->fmt.pix.width;
> + frm->height = f->fmt.pix.height;
> + frm->size = f->fmt.pix.sizeimage;
> + /* Reset crop settings */
> + frm->o_width = 0;
> + frm->o_height = 0;
> + frm->c_width = frm->width;
> + frm->c_height = frm->height;
Why store crop values when cropping is not supported? Just crop this, this seems to be
copy-and-paste from the samsung driver.
> + frm->right = frm->width;
> + frm->bottom = frm->height;
> + frm->fmt = fmt;
> + frm->line_offset = 0;
> + if (f->fmt.win.global_alpha != 0) {
Huh? There is no f->fmt.win, this v4l2_format struct uses f->fmt.pix.
> + frm->a_rgb[3] = f->fmt.win.global_alpha;
> + frm->a_mode = DMA2D_ALPHA_MODE_REPLACE;
Again perhaps old copy-and-paste code from the samsung driver?
> + }
> +
> + return 0;
> +}
> +
> +static void device_run(void *prv)
> +{
> + struct dma2d_ctx *ctx = prv;
> + struct dma2d_dev *dev = ctx->dev;
> + struct dma2d_frame *frm_out, *frm_cap;
> + struct vb2_v4l2_buffer *src, *dst;
> + unsigned long flags;
> +
> + spin_lock_irqsave(&dev->ctrl_lock, flags);
> + dev->curr = ctx;
> +
> + src = v4l2_m2m_next_src_buf(ctx->fh.m2m_ctx);
> + dst = v4l2_m2m_next_dst_buf(ctx->fh.m2m_ctx);
> + if (!dst || !src)
> + goto end;
> +
> + frm_cap = get_frame(ctx, V4L2_BUF_TYPE_VIDEO_CAPTURE);
> + frm_out = get_frame(ctx, V4L2_BUF_TYPE_VIDEO_OUTPUT);
> + if (!frm_cap || !frm_out)
> + goto end;
> +
> + src->sequence = frm_out->sequence++;
> + dst->sequence = frm_cap->sequence++;
> + v4l2_m2m_buf_copy_metadata(src, dst, true);
> +
> + clk_enable(dev->gate);
> +
> + dma2d_config_fg(dev, frm_out,
> + vb2_dma_contig_plane_dma_addr(&src->vb2_buf, 0));
> +
> + /* TODO: add M2M_BLEND handler here */
> +
> + if (ctx->op_mode != DMA2D_MODE_R2M) {
> + if (frm_out->fmt->fourcc == frm_cap->fmt->fourcc)
> + ctx->op_mode = DMA2D_MODE_M2M;
> + else
> + ctx->op_mode = DMA2D_MODE_M2M_FPC;
> + }
> +
> + dma2d_config_out(dev, frm_cap,
> + vb2_dma_contig_plane_dma_addr(&dst->vb2_buf, 0));
> + dma2d_config_common(dev, ctx->op_mode, frm_cap->width, frm_cap->height);
> +
> + dma2d_start(dev);
> +end:
> + spin_unlock_irqrestore(&dev->ctrl_lock, flags);
> +}
> +
> +static irqreturn_t dma2d_isr(int irq, void *prv)
> +{
> + struct dma2d_dev *dev = prv;
> + struct dma2d_ctx *ctx = dev->curr;
> + struct vb2_v4l2_buffer *src, *dst;
> + u32 s = dma2d_get_int(dev);
> +
> + if (s & ISR_TCIF || s == 0) {
> + dma2d_clear_int(dev);
> + clk_disable(dev->gate);
> +
> + WARN_ON(!ctx);
> +
> + src = v4l2_m2m_src_buf_remove(ctx->fh.m2m_ctx);
> + dst = v4l2_m2m_dst_buf_remove(ctx->fh.m2m_ctx);
> +
> + WARN_ON(!dst);
> + WARN_ON(!src);
> +
> + v4l2_m2m_buf_done(src, VB2_BUF_STATE_DONE);
> + v4l2_m2m_buf_done(dst, VB2_BUF_STATE_DONE);
> + v4l2_m2m_job_finish(dev->m2m_dev, ctx->fh.m2m_ctx);
> +
> + dev->curr = NULL;
> + } else {
> + dma2d_clear_int(dev);
> + }
> +
> + return IRQ_HANDLED;
> +}
> +
> +static const struct v4l2_file_operations dma2d_fops = {
> + .owner = THIS_MODULE,
> + .open = dma2d_open,
> + .release = dma2d_release,
> + .poll = v4l2_m2m_fop_poll,
> + .unlocked_ioctl = video_ioctl2,
> + .mmap = v4l2_m2m_fop_mmap,
> +#ifndef CONFIG_MMU
> + .get_unmapped_area = v4l2_m2m_get_unmapped_area,
> +#endif
> +};
> +
> +static const struct v4l2_ioctl_ops dma2d_ioctl_ops = {
> + .vidioc_querycap = vidioc_querycap,
> +
> + .vidioc_enum_fmt_vid_cap = vidioc_enum_fmt,
> + .vidioc_g_fmt_vid_cap = vidioc_g_fmt,
> + .vidioc_try_fmt_vid_cap = vidioc_try_fmt,
> + .vidioc_s_fmt_vid_cap = vidioc_s_fmt,
> +
> + .vidioc_enum_fmt_vid_out = vidioc_enum_fmt,
> + .vidioc_g_fmt_vid_out = vidioc_g_fmt,
> + .vidioc_try_fmt_vid_out = vidioc_try_fmt,
> + .vidioc_s_fmt_vid_out = vidioc_s_fmt,
> +
> + .vidioc_reqbufs = v4l2_m2m_ioctl_reqbufs,
> + .vidioc_querybuf = v4l2_m2m_ioctl_querybuf,
> + .vidioc_qbuf = v4l2_m2m_ioctl_qbuf,
> + .vidioc_dqbuf = v4l2_m2m_ioctl_dqbuf,
> + .vidioc_prepare_buf = v4l2_m2m_ioctl_prepare_buf,
> + .vidioc_create_bufs = v4l2_m2m_ioctl_create_bufs,
> + .vidioc_expbuf = v4l2_m2m_ioctl_expbuf,
> +
> + .vidioc_streamon = v4l2_m2m_ioctl_streamon,
> + .vidioc_streamoff = v4l2_m2m_ioctl_streamoff,
> +
> + .vidioc_subscribe_event = v4l2_ctrl_subscribe_event,
> + .vidioc_unsubscribe_event = v4l2_event_unsubscribe,
> +};
> +
> +static const struct video_device dma2d_videodev = {
> + .name = DMA2D_NAME,
> + .fops = &dma2d_fops,
> + .ioctl_ops = &dma2d_ioctl_ops,
> + .minor = -1,
> + .release = video_device_release,
> + .vfl_dir = VFL_DIR_M2M,
> +};
> +
> +static const struct v4l2_m2m_ops dma2d_m2m_ops = {
> + .device_run = device_run,
> +};
> +
> +static const struct of_device_id stm32_dma2d_match[];
> +
> +static int dma2d_probe(struct platform_device *pdev)
> +{
> + struct dma2d_dev *dev;
> + struct video_device *vfd;
> + struct resource *res;
> + int ret = 0;
> +
> + dev = devm_kzalloc(&pdev->dev, sizeof(*dev), GFP_KERNEL);
> + if (!dev)
> + return -ENOMEM;
> +
> + spin_lock_init(&dev->ctrl_lock);
> + mutex_init(&dev->mutex);
> + atomic_set(&dev->num_inst, 0);
> +
> + res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
> +
> + dev->regs = devm_ioremap_resource(&pdev->dev, res);
> + if (IS_ERR(dev->regs))
> + return PTR_ERR(dev->regs);
> +
> + dev->gate = clk_get(&pdev->dev, "dma2d");
> + if (IS_ERR(dev->gate)) {
> + dev_err(&pdev->dev, "failed to get dma2d clock gate\n");
> + ret = -ENXIO;
> + return ret;
> + }
> +
> + ret = clk_prepare(dev->gate);
> + if (ret) {
> + dev_err(&pdev->dev, "failed to prepare dma2d clock gate\n");
> + goto put_clk_gate;
> + }
> +
> + res = platform_get_resource(pdev, IORESOURCE_IRQ, 0);
> + if (!res) {
> + dev_err(&pdev->dev, "failed to find IRQ\n");
> + ret = -ENXIO;
> + goto unprep_clk_gate;
> + }
> +
> + dev->irq = res->start;
> +
> + ret = devm_request_irq(&pdev->dev, dev->irq, dma2d_isr,
> + 0, pdev->name, dev);
> + if (ret) {
> + dev_err(&pdev->dev, "failed to install IRQ\n");
> + goto unprep_clk_gate;
> + }
> +
> + ret = v4l2_device_register(&pdev->dev, &dev->v4l2_dev);
> + if (ret)
> + goto unprep_clk_gate;
> +
> + vfd = video_device_alloc();
> + if (!vfd) {
> + v4l2_err(&dev->v4l2_dev, "Failed to allocate video device\n");
> + ret = -ENOMEM;
> + goto unreg_v4l2_dev;
> + }
> +
> + *vfd = dma2d_videodev;
> + set_bit(V4L2_FL_QUIRK_INVERTED_CROP, &vfd->flags);
Drop this quirk! Definitely copy-and-paste from the samsung driver, and not something
you want or need here.
> + vfd->lock = &dev->mutex;
> + vfd->v4l2_dev = &dev->v4l2_dev;
> + vfd->device_caps = V4L2_CAP_VIDEO_M2M | V4L2_CAP_STREAMING;
> + ret = video_register_device(vfd, VFL_TYPE_VIDEO, 0);
This must be done last, so move it to the end of the probe().
> + if (ret) {
> + v4l2_err(&dev->v4l2_dev, "Failed to register video device\n");
> + goto rel_vdev;
> + }
> +
> + video_set_drvdata(vfd, dev);
> + dev->vfd = vfd;
> + v4l2_info(&dev->v4l2_dev, "device registered as /dev/video%d\n",
> + vfd->num);
> + platform_set_drvdata(pdev, dev);
> + dev->m2m_dev = v4l2_m2m_init(&dma2d_m2m_ops);
> + if (IS_ERR(dev->m2m_dev)) {
> + v4l2_err(&dev->v4l2_dev, "Failed to init mem2mem device\n");
> + ret = PTR_ERR(dev->m2m_dev);
> + goto unreg_video_dev;
> + }
> +
> + v4l2_info(&dev->v4l2_dev, "stm32 dma2d initialized\n");
> + return 0;
> +
> +unreg_video_dev:
> + video_unregister_device(dev->vfd);
> +rel_vdev:
> + video_device_release(vfd);
> +unreg_v4l2_dev:
> + v4l2_device_unregister(&dev->v4l2_dev);
> +unprep_clk_gate:
> + clk_unprepare(dev->gate);
> +put_clk_gate:
> + clk_put(dev->gate);
> +
> + return ret;
> +}
> +
> +static int dma2d_remove(struct platform_device *pdev)
> +{
> + struct dma2d_dev *dev = platform_get_drvdata(pdev);
> +
> + v4l2_info(&dev->v4l2_dev, "Removing " DMA2D_NAME);
> + v4l2_m2m_release(dev->m2m_dev);
> + video_unregister_device(dev->vfd);
> + v4l2_device_unregister(&dev->v4l2_dev);
> + vb2_dma_contig_clear_max_seg_size(&pdev->dev);
> + clk_unprepare(dev->gate);
> + clk_put(dev->gate);
> +
> + return 0;
> +}
> +
> +static const struct of_device_id stm32_dma2d_match[] = {
> + {
> + .compatible = "st,stm32-dma2d",
> + .data = NULL,
> + },
> + {},
> +};
> +MODULE_DEVICE_TABLE(of, stm32_dma2d_match);
> +
> +static struct platform_driver dma2d_pdrv = {
> + .probe = dma2d_probe,
> + .remove = dma2d_remove,
> + .driver = {
> + .name = DMA2D_NAME,
> + .of_match_table = stm32_dma2d_match,
> + },
> +};
> +
> +module_platform_driver(dma2d_pdrv);
> +
> +MODULE_AUTHOR("Dillon Min <dillon.minfei@...il.com>");
> +MODULE_DESCRIPTION("STM32 Chrom-Art Accelerator DMA2D driver");
> +MODULE_LICENSE("GPL");
> diff --git a/drivers/media/platform/stm32/dma2d/dma2d.h b/drivers/media/platform/stm32/dma2d/dma2d.h
> new file mode 100644
> index 000000000000..f317cf1dd35a
> --- /dev/null
> +++ b/drivers/media/platform/stm32/dma2d/dma2d.h
> @@ -0,0 +1,136 @@
> +/* SPDX-License-Identifier: GPL-2.0-or-later */
> +/*
> + * ST stm32 DMA2D - 2D Graphics Accelerator Driver
> + *
> + * Copyright (c) 2021 Dillon Min
> + * Dillon Min, <dillon.minfei@...il.com>
> + *
> + * based on s5p-g2d
> + *
> + * Copyright (c) 2011 Samsung Electronics Co., Ltd.
> + * Kamil Debski, <k.debski@...sung.com>
> + */
> +
> +#ifndef __DMA2D_H__
> +#define __DMA2D_H__
> +
> +#include <linux/platform_device.h>
> +#include <media/v4l2-device.h>
> +#include <media/v4l2-ctrls.h>
> +
> +#define DMA2D_NAME "stm-dma2d"
> +#define BUS_INFO "platform:stm-dma2d"
> +enum dma2d_op_mode {
> + DMA2D_MODE_M2M,
> + DMA2D_MODE_M2M_FPC,
> + DMA2D_MODE_M2M_BLEND,
> + DMA2D_MODE_R2M
> +};
> +
> +enum dma2d_cmode {
> + /* output pfc cmode from ARGB888 to ARGB4444 */
> + DMA2D_CMODE_ARGB8888,
> + DMA2D_CMODE_RGB888,
> + DMA2D_CMODE_RGB565,
> + DMA2D_CMODE_ARGB1555,
> + DMA2D_CMODE_ARGB4444,
> + /* bg or fg pfc cmode from L8 to A4 */
> + DMA2D_CMODE_L8,
> + DMA2D_CMODE_AL44,
> + DMA2D_CMODE_AL88,
> + DMA2D_CMODE_L4,
> + DMA2D_CMODE_A8,
> + DMA2D_CMODE_A4
> +};
> +
> +enum dma2d_alpha_mode {
> + DMA2D_ALPHA_MODE_NO_MODIF,
> + DMA2D_ALPHA_MODE_REPLACE,
> + DMA2D_ALPHA_MODE_COMBINE
> +};
> +
> +struct dma2d_fmt {
> + u32 fourcc;
> + int depth;
> + enum dma2d_cmode cmode;
> +};
> +
> +struct dma2d_frame {
> + /* Original dimensions */
> + u32 width;
> + u32 height;
> + /* Crop size */
> + u32 c_width;
> + u32 c_height;
> + /* Offset */
> + u32 o_width;
> + u32 o_height;
> + u32 bottom;
> + u32 right;
> + u16 line_offset;
> + /* Image format */
> + struct dma2d_fmt *fmt;
> + /* [0]: blue
> + * [1]: green
> + * [2]: red
> + * [3]: alpha
> + */
> + u8 a_rgb[4];
> + /*
> + * AM[1:0] of DMA2D_FGPFCCR
> + */
> + enum dma2d_alpha_mode a_mode;
> + u32 size;
> + unsigned int sequence;
> +};
> +
> +struct dma2d_ctx {
> + struct v4l2_fh fh;
> + struct dma2d_dev *dev;
> + struct dma2d_frame cap;
> + struct dma2d_frame out;
> + struct dma2d_frame bg;
> + /* fb_buf always point to bg address */
> + struct v4l2_framebuffer fb_buf;
> + /*
> + * MODE[17:16] of DMA2D_CR
> + */
> + enum dma2d_op_mode op_mode;
> + u8 alpha_component;
> + struct v4l2_ctrl_handler ctrl_handler;
> + enum v4l2_colorspace colorspace;
> + enum v4l2_ycbcr_encoding ycbcr_enc;
> + enum v4l2_xfer_func xfer_func;
> + enum v4l2_quantization quant;
> +};
> +
> +struct dma2d_dev {
> + struct v4l2_device v4l2_dev;
> + struct v4l2_m2m_dev *m2m_dev;
> + struct video_device *vfd;
> + /* for device open/close etc */
> + struct mutex mutex;
> + /* to avoid the conflict with device running and user setting
> + * at the same time
> + */
> + spinlock_t ctrl_lock;
> + atomic_t num_inst;
> + void __iomem *regs;
> + struct clk *gate;
> + struct dma2d_ctx *curr;
> + int irq;
> +};
> +
> +void dma2d_start(struct dma2d_dev *d);
> +u32 dma2d_get_int(struct dma2d_dev *d);
> +void dma2d_clear_int(struct dma2d_dev *d);
> +void dma2d_config_out(struct dma2d_dev *d, struct dma2d_frame *frm,
> + dma_addr_t o_addr);
> +void dma2d_config_fg(struct dma2d_dev *d, struct dma2d_frame *frm,
> + dma_addr_t f_addr);
> +void dma2d_config_bg(struct dma2d_dev *d, struct dma2d_frame *frm,
> + dma_addr_t b_addr);
> +void dma2d_config_common(struct dma2d_dev *d, enum dma2d_op_mode op_mode,
> + u16 width, u16 height);
> +
> +#endif /* __DMA2D_H__ */
>
Regards,
Hans
Powered by blists - more mailing lists