Message-Id: <20210810172956.693269846@linuxfoundation.org>
Date:   Tue, 10 Aug 2021 19:29:24 +0200
From:   Greg Kroah-Hartman <gregkh@...uxfoundation.org>
To:     linux-kernel@...r.kernel.org
Cc:     Greg Kroah-Hartman <gregkh@...uxfoundation.org>,
        stable@...r.kernel.org, Alex Forster <aforster@...udflare.com>,
        Jakub Sitnicki <jakub@...udflare.com>,
        "David S. Miller" <davem@...emloft.net>,
        Sasha Levin <sashal@...nel.org>
Subject: [PATCH 5.10 030/135] net, gro: Set inner transport header offset in tcp/udp GRO hook

From: Jakub Sitnicki <jakub@...udflare.com>

[ Upstream commit d51c5907e9809a803b276883d203f45849abd4d6 ]

GSO expects inner transport header offset to be valid when
skb->encapsulation flag is set. GSO uses this value to calculate the length
of an individual segment of a GSO packet in skb_gso_transport_seglen().

However, tcp/udp gro_complete callbacks don't update the
skb->inner_transport_header when processing an encapsulated TCP/UDP
segment. As a result a GRO skb has ->inner_transport_header set to a value
carried over from earlier skb processing.

This can have mild to tragic consequences. From miscalculating the GSO
segment length to triggering a page fault [1], when trying to read TCP/UDP
header at an address past the skb->data page.

The latter scenario leads to an oops report like so:

  BUG: unable to handle page fault for address: ffff9fa7ec00d008
  #PF: supervisor read access in kernel mode
  #PF: error_code(0x0000) - not-present page
  PGD 123f201067 P4D 123f201067 PUD 123f209067 PMD 0
  Oops: 0000 [#1] SMP NOPTI
  CPU: 44 PID: 0 Comm: swapper/44 Not tainted 5.4.53-cloudflare-2020.7.21 #1
  Hardware name: HYVE EDGE-METAL-GEN10/HS-1811DLite1, BIOS V2.15 02/21/2020
  RIP: 0010:skb_gso_transport_seglen+0x44/0xa0
  Code: c0 41 83 e0 11 f6 87 81 00 00 00 20 74 30 0f b7 87 aa 00 00 00 0f [...]
  RSP: 0018:ffffad8640bacbb8 EFLAGS: 00010202
  RAX: 000000000000feda RBX: ffff9fcc8d31bc00 RCX: ffff9fa7ec00cffc
  RDX: ffff9fa7ebffdec0 RSI: 000000000000feda RDI: 0000000000000122
  RBP: 00000000000005c4 R08: 0000000000000001 R09: 0000000000000000
  R10: ffff9fe588ae3800 R11: ffff9fe011fc92f0 R12: ffff9fcc8d31bc00
  R13: ffff9fe0119d4300 R14: 00000000000005c4 R15: ffff9fba57d70900
  FS:  0000000000000000(0000) GS:ffff9fe68df00000(0000) knlGS:0000000000000000
  CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
  CR2: ffff9fa7ec00d008 CR3: 0000003e99b1c000 CR4: 0000000000340ee0
  Call Trace:
   <IRQ>
   skb_gso_validate_network_len+0x11/0x70
   __ip_finish_output+0x109/0x1c0
   ip_sublist_rcv_finish+0x57/0x70
   ip_sublist_rcv+0x2aa/0x2d0
   ? ip_rcv_finish_core.constprop.0+0x390/0x390
   ip_list_rcv+0x12b/0x14f
   __netif_receive_skb_list_core+0x2a9/0x2d0
   netif_receive_skb_list_internal+0x1b5/0x2e0
   napi_complete_done+0x93/0x140
   veth_poll+0xc0/0x19f [veth]
   ? mlx5e_napi_poll+0x221/0x610 [mlx5_core]
   net_rx_action+0x1f8/0x790
   __do_softirq+0xe1/0x2bf
   irq_exit+0x8e/0xc0
   do_IRQ+0x58/0xe0
   common_interrupt+0xf/0xf
   </IRQ>

The bug can be observed in a simple setup where we send IP/GRE/IP/TCP
packets into a netns over a veth pair. Inside the netns, packets are
forwarded to dummy device:

  trafgen -> [veth A]--[veth B] -forward-> [dummy]

For veth B to GRO aggregate packets on receive, it needs to have an XDP
program attached (for example, a trivial XDP_PASS). Additionally, for UDP,
we need to enable GSO_UDP_L4 feature on the device:

  ip netns exec A ethtool -K AB rx-udp-gro-forwarding on

The last component is an artificial delay to increase the chances of GRO
batching happening:

  ip netns exec A tc qdisc add dev AB root \
     netem delay 200us slot 5ms 10ms packets 2 bytes 64k

With such a setup in place, the bug can be observed by tracing the skb
outer and inner offsets when GSO skb is transmitted from the dummy device:

tcp:

FUNC              DEV   SKB_LEN  NH  TH ENC INH ITH GSO_SIZE GSO_TYPE
ip_finish_output  dumB     2830 270 290   1 294 254     1383 (tcpv4,gre,)
                                                ^^^
udp:

FUNC              DEV   SKB_LEN  NH  TH ENC INH ITH GSO_SIZE GSO_TYPE
ip_finish_output  dumB     2818 270 290   1 294 254     1383 (gre,udp_l4,)
                                                ^^^

Fix it by updating the inner transport header offset in tcp/udp
gro_complete callbacks, similar to how {inet,ipv6}_gro_complete callbacks
update the inner network header offset, when skb->encapsulation flag is
set.

[1] https://lore.kernel.org/netdev/CAKxSbF01cLpZem2GFaUaifh0S-5WYViZemTicAg7FCHOnh6kug@mail.gmail.com/

Fixes: bf296b125b21 ("tcp: Add GRO support")
Fixes: f993bc25e519 ("net: core: handle encapsulation offloads when computing segment lengths")
Fixes: e20cf8d3f1f7 ("udp: implement GRO for plain UDP sockets.")
Reported-by: Alex Forster <aforster@...udflare.com>
Signed-off-by: Jakub Sitnicki <jakub@...udflare.com>
Signed-off-by: David S. Miller <davem@...emloft.net>
Signed-off-by: Sasha Levin <sashal@...nel.org>
---
 net/ipv4/tcp_offload.c | 3 +++
 net/ipv4/udp_offload.c | 4 ++++
 2 files changed, 7 insertions(+)

diff --git a/net/ipv4/tcp_offload.c b/net/ipv4/tcp_offload.c
index e09147ac9a99..fc61cd3fea65 100644
--- a/net/ipv4/tcp_offload.c
+++ b/net/ipv4/tcp_offload.c
@@ -298,6 +298,9 @@ int tcp_gro_complete(struct sk_buff *skb)
 	if (th->cwr)
 		skb_shinfo(skb)->gso_type |= SKB_GSO_TCP_ECN;
 
+	if (skb->encapsulation)
+		skb->inner_transport_header = skb->transport_header;
+
 	return 0;
 }
 EXPORT_SYMBOL(tcp_gro_complete);
diff --git a/net/ipv4/udp_offload.c b/net/ipv4/udp_offload.c
index 6e2b02cf7841..f4b8e56068e0 100644
--- a/net/ipv4/udp_offload.c
+++ b/net/ipv4/udp_offload.c
@@ -615,6 +615,10 @@ static int udp_gro_complete_segment(struct sk_buff *skb)
 
 	skb_shinfo(skb)->gso_segs = NAPI_GRO_CB(skb)->count;
 	skb_shinfo(skb)->gso_type |= SKB_GSO_UDP_L4;
+
+	if (skb->encapsulation)
+		skb->inner_transport_header = skb->transport_header;
+
 	return 0;
 }
 
-- 
2.30.2

Powered by blists - more mailing lists