lists  /  announce  owl-users  owl-dev  john-users  john-dev  passwdqc-users  yescrypt  popa3d-users  /  oss-security  kernel-hardening  musl  sabotage  tlsify  passwords  /  crypt-dev  xvendor  /  Bugtraq  Full-Disclosure  linux-kernel  linux-netdev  linux-ext4  linux-hardening  PHC 
Open Source and information security mailing list archives
Hash Suite for Android: free password hash cracker in your pocket
[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Date:   Tue, 10 Aug 2021 19:29:05 +0200
From:   Greg Kroah-Hartman <>
Cc:     Greg Kroah-Hartman <>,, Marek Vasut <>,
        Alexandre Torgue <>,
        Patrice Chotard <>,
        Patrick Delaunay <>,,
        Sasha Levin <>
Subject: [PATCH 5.13 037/175] ARM: dts: stm32: Disable LAN8710 EDPD on DHCOM

From: Marek Vasut <>

[ Upstream commit 36862c1ebc92a7e6fcc55002965c44b8ad17d4ca ]

The LAN8710 Energy Detect Power Down (EDPD) functionality might cause
unreliable cable detection. There are multiple accounts of this in the
SMSC PHY driver patches which attempted to make EDPD reliable, however
it seems there is always some sort of corner case left. Unfortunatelly,
there is no errata documented which would confirm this to be a silicon
bug on the LAN87xx series of PHYs (LAN8700, LAN8710, LAN8720 at least).

Disable EDPD on the DHCOM SoM, just like multiple other boards already
do as well, to make the cable detection reliable.

Fixes: 34e0c7847dcf ("ARM: dts: stm32: Add DH Electronics DHCOM STM32MP1 SoM and PDK2 board")
Signed-off-by: Marek Vasut <>
Cc: Alexandre Torgue <>
Cc: Patrice Chotard <>
Cc: Patrick Delaunay <>
Signed-off-by: Alexandre Torgue <>
Signed-off-by: Sasha Levin <>
 arch/arm/boot/dts/stm32mp15xx-dhcom-som.dtsi | 1 +
 1 file changed, 1 insertion(+)

diff --git a/arch/arm/boot/dts/stm32mp15xx-dhcom-som.dtsi b/arch/arm/boot/dts/stm32mp15xx-dhcom-som.dtsi
index 8349c9099e30..8c41f819f776 100644
--- a/arch/arm/boot/dts/stm32mp15xx-dhcom-som.dtsi
+++ b/arch/arm/boot/dts/stm32mp15xx-dhcom-som.dtsi
@@ -140,6 +140,7 @@
 			reset-gpios = <&gpioh 3 GPIO_ACTIVE_LOW>;
 			reset-assert-us = <500>;
 			reset-deassert-us = <500>;
+			smsc,disable-energy-detect;
 			interrupt-parent = <&gpioi>;
 			interrupts = <11 IRQ_TYPE_LEVEL_LOW>;

Powered by blists - more mailing lists