| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <CMEOXQ.F594ZQFPV8PT2@protonmail.com>
Date: Wed, 11 Aug 2021 12:56:57 +0000
From: Yassine Oudjana <y.oudjana@...tonmail.com>
To: Georgi Djakov <djakov@...nel.org>
Cc: Andy Gross <agross@...nel.org>,
Bjorn Andersson <bjorn.andersson@...aro.org>,
Rob Herring <robh+dt@...nel.org>,
AngeloGioacchino Del Regno <kholk11@...il.com>,
linux-arm-msm@...r.kernel.org, linux-pm@...r.kernel.org,
devicetree@...r.kernel.org, linux-kernel@...r.kernel.org,
okukatla@...eaurora.org, mdtipton@...eaurora.org
Subject: Re: [PATCH v3 5/6] interconnect: qcom: Add MSM8996 interconnect provider driver
On Wed, Aug 11 2021 at 14:56:01 +0400, Georgi Djakov
<djakov@...nel.org> wrote:
> Hi Yassine,
>
> Thank you for working on this!
>
> On 11.08.21 7:37, Yassine Oudjana wrote:
>> Add a driver for the MSM8996 NoCs. This chip is similar to SDM660
>> where
>> some busses are controlled by RPM, while others directly by the AP
>> with
>> writes to QoS registers.
>>
>> This driver currently supports all NoCs except a0noc.
>
> Just curious what's the issue with a0noc. Do we need to enable some
> GDSC
> or clock in order to write to the QoS registers?
I'm not sure why, but I get a SError interrupt when writing to its
registers.
I tried enabling AGGRE0_NOC_GDSC but it didn't change anything.
>
>>
>> Signed-off-by: Yassine Oudjana <y.oudjana@...tonmail.com>
>> ---
>> drivers/interconnect/qcom/Kconfig | 9 +
>> drivers/interconnect/qcom/Makefile | 2 +
>> drivers/interconnect/qcom/msm8996.c | 574
>> ++++++++++++++++++++++++++++
>> drivers/interconnect/qcom/msm8996.h | 149 ++++++++
>> 4 files changed, 734 insertions(+)
>> create mode 100644 drivers/interconnect/qcom/msm8996.c
>> create mode 100644 drivers/interconnect/qcom/msm8996.h
>>
>> diff --git a/drivers/interconnect/qcom/Kconfig
>> b/drivers/interconnect/qcom/Kconfig
>> index ad16224f1720..e30ad95e5584 100644
>> --- a/drivers/interconnect/qcom/Kconfig
>> +++ b/drivers/interconnect/qcom/Kconfig
>> @@ -35,6 +35,15 @@ config INTERCONNECT_QCOM_MSM8974
>> This is a driver for the Qualcomm Network-on-Chip on
>> msm8974-based
>> platforms.
>>
>> +config INTERCONNECT_QCOM_MSM8996
>> + tristate "Qualcomm MSM8996 interconnect driver"
>> + depends on INTERCONNECT_QCOM
>> + depends on QCOM_SMD_RPM
>> + select INTERCONNECT_QCOM_SMD_RPM_QOS
>> + help
>> + This is a driver for the Qualcomm Network-on-Chip on
>> msm8996-based
>> + platforms.
>> +
>> config INTERCONNECT_QCOM_OSM_L3
>> tristate "Qualcomm OSM L3 interconnect driver"
>> depends on INTERCONNECT_QCOM || COMPILE_TEST
>> diff --git a/drivers/interconnect/qcom/Makefile
>> b/drivers/interconnect/qcom/Makefile
>> index 2d04d024f46e..8a198b8b7a45 100644
>> --- a/drivers/interconnect/qcom/Makefile
>> +++ b/drivers/interconnect/qcom/Makefile
>> @@ -4,6 +4,7 @@ icc-bcm-voter-objs := bcm-voter.o
>> qnoc-msm8916-objs := msm8916.o
>> qnoc-msm8939-objs := msm8939.o
>> qnoc-msm8974-objs := msm8974.o
>> +qnoc-msm8996-objs := msm8996.o
>> icc-osm-l3-objs := osm-l3.o
>> qnoc-qcs404-objs := qcs404.o
>> icc-rpmh-obj := icc-rpmh.o
>> @@ -22,6 +23,7 @@ obj-$(CONFIG_INTERCONNECT_QCOM_BCM_VOTER) +=
>> icc-bcm-voter.o
>> obj-$(CONFIG_INTERCONNECT_QCOM_MSM8916) += qnoc-msm8916.o
>> obj-$(CONFIG_INTERCONNECT_QCOM_MSM8939) += qnoc-msm8939.o
>> obj-$(CONFIG_INTERCONNECT_QCOM_MSM8974) += qnoc-msm8974.o
>> +obj-$(CONFIG_INTERCONNECT_QCOM_MSM8996) += qnoc-msm8996.o
>> obj-$(CONFIG_INTERCONNECT_QCOM_OSM_L3) += icc-osm-l3.o
>> obj-$(CONFIG_INTERCONNECT_QCOM_QCS404) += qnoc-qcs404.o
>> obj-$(CONFIG_INTERCONNECT_QCOM_RPMH) += icc-rpmh.o
>> diff --git a/drivers/interconnect/qcom/msm8996.c
>> b/drivers/interconnect/qcom/msm8996.c
>> new file mode 100644
>> index 000000000000..0cb93d743f35
>> --- /dev/null
>> +++ b/drivers/interconnect/qcom/msm8996.c
>> @@ -0,0 +1,574 @@
>> +/* SPDX-License-Identifier: GPL-2.0-only */
>
> The // style is preferred for .c files.
Noted.
>
>> +/*
>> + * Qualcomm MSM8996 Network-on-Chip (NoC) QoS driver
>> + *
>> + * Copyright (c) 2021 Yassine Oudjana <y.oudjana@...tonmail.com>
>> + */
>> +
>> +#include <linux/clk.h>
>> +#include <linux/device.h>
>> +#include <linux/interconnect-provider.h>
>> +#include <linux/io.h>
>> +#include <linux/module.h>
>> +#include <linux/of_device.h>
>> +#include <linux/of_platform.h>
>> +#include <linux/platform_device.h>
>> +#include <linux/regmap.h>
>> +
>> +#include <dt-bindings/interconnect/qcom,msm8996.h>
>> +
>> +#include "icc-rpm-qos.h"
>> +#include "smd-rpm.h"
>> +#include "msm8996.h"
>> +
> [..]
>> +DEFINE_QNODE(mas_mdp_p0, MSM8996_MASTER_MDP_PORT0, 32, 8, -1,
>> true, NOC_QOS_MODE_BYPASS, 0, 1, MSM8996_SLAVE_MNOC_BIMC);
>> +DEFINE_QNODE(mas_mdp_p1, MSM8996_MASTER_MDP_PORT1, 32, 61, -1,
>> true, NOC_QOS_MODE_BYPASS, 0, 2, MSM8996_SLAVE_MNOC_BIMC);
>> +DEFINE_QNODE(mas_rotator, MSM8996_MASTER_ROTATOR, 32, 120, -1,
>> true, NOC_QOS_MODE_BYPASS, 0, 0, MSM8996_SLAVE_MNOC_BIMC);
>> +DEFINE_QNODE(mas_venus, MSM8996_MASTER_VIDEO_P0, 32, 9, -1, true,
>> NOC_QOS_MODE_BYPASS, 0, 3 /* TODO: 3 4 ?? */,
>> MSM8996_SLAVE_MNOC_BIMC);
>
> Is the TODO for multiple QoS ports?
I was going to better format that TODO or remove it but it seems that I
forgot.
Downstream has both ports specified.
>
> [..]
>
>> +static const struct regmap_config msm8996_mnoc_regmap_config = {
>> + .reg_bits = 32,
>> + .reg_stride = 4,
>> + .val_bits = 32,
>> + .max_register = 0x20000,
>> + .fast_io = true,
>> +};
>> +
>> +static const struct qcom_icc_desc msm8996_mnoc = {
>> + .nodes = mnoc_nodes,
>> + .num_nodes = ARRAY_SIZE(mnoc_nodes),
>> + .regmap_cfg = &msm8996_mnoc_regmap_config,
>> +};
>> +
>> +
>
> Nit: No multiple blank lines, please.
Noted.
>
>> +static struct qcom_icc_node *pnoc_nodes[] = {
>> + [MASTER_SNOC_PNOC] = &mas_snoc_pnoc,
>> + [MASTER_SDCC_1] = &mas_sdcc_1,
>> + [MASTER_SDCC_2] = &mas_sdcc_2,
>> + [MASTER_SDCC_4] = &mas_sdcc_4,
>> + [MASTER_USB_HS] = &mas_usb_hs,
>> + [MASTER_BLSP_1] = &mas_blsp_1,
>> + [MASTER_BLSP_2] = &mas_blsp_2,
>> + [MASTER_TSIF] = &mas_tsif,
>> + [SLAVE_PNOC_A1NOC] = &slv_pnoc_a1noc,
>> + [SLAVE_USB_HS] = &slv_usb_hs,
>> + [SLAVE_SDCC_2] = &slv_sdcc_2,
>> + [SLAVE_SDCC_4] = &slv_sdcc_4,
>> + [SLAVE_TSIF] = &slv_tsif,
>> + [SLAVE_BLSP_2] = &slv_blsp_2,
>> + [SLAVE_SDCC_1] = &slv_sdcc_1,
>> + [SLAVE_BLSP_1] = &slv_blsp_1,
>> + [SLAVE_PDM] = &slv_pdm,
>> + [SLAVE_AHB2PHY] = &slv_ahb2phy,
>> +};
>> +
>> +static const struct regmap_config msm8996_pnoc_regmap_config = {
>> + .reg_bits = 32,
>> + .reg_stride = 4,
>> + .val_bits = 32,
>> + .max_register = 0x3000,
>> + .fast_io = true,
>> +};
>> +
> [..]
>> + for (i = 0; i < num_nodes; i++) {
>> + size_t j;
>> +
>> + node = icc_node_create(qnodes[i]->id);
>> + if (IS_ERR(node)) {
>> + ret = PTR_ERR(node);
>> + goto err;
>> + }
>> +
>> + node->name = qnodes[i]->name;
>> + node->data = qnodes[i];
>> + icc_node_add(node, provider);
>> +
>> + for (j = 0; j < qnodes[i]->num_links; j++) {
>> + icc_link_create(node, qnodes[i]->links[j]);
>> + }
>
> Nit: No need for braces.
>
> Also please rebase all patches onto linux-next.
>
> Thanks,
> Georgi
Will do.
Thanks,
Yassine
Powered by blists - more mailing lists