[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <20210812134145.GA4132779@roeck-us.net>
Date: Thu, 12 Aug 2021 06:41:45 -0700
From: Guenter Roeck <linux@...ck-us.net>
To: Akira Tsukamoto <akira.tsukamoto@...il.com>
Cc: Paul Walmsley <paul.walmsley@...ive.com>,
Palmer Dabbelt <palmer@...belt.com>,
Geert Uytterhoeven <geert@...ux-m68k.org>,
Qiu Wenbo <qiuwenbo@...inos.com.cn>,
Albert Ou <aou@...s.berkeley.edu>,
linux-riscv@...ts.infradead.org, linux-kernel@...r.kernel.org
Subject: Re: [PATCH 1/1] riscv: __asm_copy_to-from_user: Improve using word
copy if size < 9*SZREG
On Fri, Jul 30, 2021 at 10:52:44PM +0900, Akira Tsukamoto wrote:
> Reduce the number of slow byte_copy when the size is in between
> 2*SZREG to 9*SZREG by using none unrolled word_copy.
>
> Without it any size smaller than 9*SZREG will be using slow byte_copy
> instead of none unrolled word_copy.
>
> Signed-off-by: Akira Tsukamoto <akira.tsukamoto@...il.com>
Tested-by: Guenter Roeck <linux@...ck-us.net>
> ---
> arch/riscv/lib/uaccess.S | 46 ++++++++++++++++++++++++++++++++++++----
> 1 file changed, 42 insertions(+), 4 deletions(-)
>
> diff --git a/arch/riscv/lib/uaccess.S b/arch/riscv/lib/uaccess.S
> index 63bc691cff91..6a80d5517afc 100644
> --- a/arch/riscv/lib/uaccess.S
> +++ b/arch/riscv/lib/uaccess.S
> @@ -34,8 +34,10 @@ ENTRY(__asm_copy_from_user)
> /*
> * Use byte copy only if too small.
> * SZREG holds 4 for RV32 and 8 for RV64
> + * a3 - 2*SZREG is minimum size for word_copy
> + * 1*SZREG for aligning dst + 1*SZREG for word_copy
> */
> - li a3, 9*SZREG /* size must be larger than size in word_copy */
> + li a3, 2*SZREG
> bltu a2, a3, .Lbyte_copy_tail
>
> /*
> @@ -66,9 +68,40 @@ ENTRY(__asm_copy_from_user)
> andi a3, a1, SZREG-1
> bnez a3, .Lshift_copy
>
> +.Lcheck_size_bulk:
> + /*
> + * Evaluate the size if possible to use unrolled.
> + * The word_copy_unlrolled requires larger than 8*SZREG
> + */
> + li a3, 8*SZREG
> + add a4, a0, a3
> + bltu a4, t0, .Lword_copy_unlrolled
> +
> .Lword_copy:
> - /*
> - * Both src and dst are aligned, unrolled word copy
> + /*
> + * Both src and dst are aligned
> + * None unrolled word copy with every 1*SZREG iteration
> + *
> + * a0 - start of aligned dst
> + * a1 - start of aligned src
> + * t0 - end of aligned dst
> + */
> + bgeu a0, t0, .Lbyte_copy_tail /* check if end of copy */
> + addi t0, t0, -(SZREG) /* not to over run */
> +1:
> + REG_L a5, 0(a1)
> + addi a1, a1, SZREG
> + REG_S a5, 0(a0)
> + addi a0, a0, SZREG
> + bltu a0, t0, 1b
> +
> + addi t0, t0, SZREG /* revert to original value */
> + j .Lbyte_copy_tail
> +
> +.Lword_copy_unlrolled:
> + /*
> + * Both src and dst are aligned
> + * Unrolled word copy with every 8*SZREG iteration
> *
> * a0 - start of aligned dst
> * a1 - start of aligned src
> @@ -97,7 +130,12 @@ ENTRY(__asm_copy_from_user)
> bltu a0, t0, 2b
>
> addi t0, t0, 8*SZREG /* revert to original value */
> - j .Lbyte_copy_tail
> +
> + /*
> + * Remaining might large enough for word_copy to reduce slow byte
> + * copy
> + */
> + j .Lcheck_size_bulk
>
> .Lshift_copy:
>
Powered by blists - more mailing lists