[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-Id: <20210817005507.1507580-9-dmitry.baryshkov@linaro.org>
Date: Tue, 17 Aug 2021 03:55:00 +0300
From: Dmitry Baryshkov <dmitry.baryshkov@...aro.org>
To: Andy Gross <agross@...nel.org>,
Bjorn Andersson <bjorn.andersson@...aro.org>,
Ulf Hansson <ulf.hansson@...aro.org>,
Marcel Holtmann <marcel@...tmann.org>,
Johan Hedberg <johan.hedberg@...il.com>,
Luiz Augusto von Dentz <luiz.dentz@...il.com>,
Kalle Valo <kvalo@...eaurora.org>,
"David S. Miller" <davem@...emloft.net>,
Jakub Kicinski <kuba@...nel.org>,
Stanimir Varbanov <svarbanov@...sol.com>
Cc: linux-arm-msm@...r.kernel.org, linux-mmc@...r.kernel.org,
linux-kernel@...r.kernel.org, linux-bluetooth@...r.kernel.org,
ath10k@...ts.infradead.org, linux-wireless@...r.kernel.org,
netdev@...r.kernel.org
Subject: [RFC PATCH 08/15] Bluetooth: hci_qca: futher rework of power on/off handling
Further rework of power on/off handling. Move bt_en and sw_ctl handling
close to regulator enable/disable, so that this code can be easily
extended with pwrseq support.
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@...aro.org>
---
drivers/bluetooth/hci_qca.c | 126 +++++++++++++++++++-----------------
1 file changed, 66 insertions(+), 60 deletions(-)
diff --git a/drivers/bluetooth/hci_qca.c b/drivers/bluetooth/hci_qca.c
index ad7e8cdc94f3..2d23e8a3ca14 100644
--- a/drivers/bluetooth/hci_qca.c
+++ b/drivers/bluetooth/hci_qca.c
@@ -1590,7 +1590,6 @@ static int qca_power_on(struct hci_dev *hdev)
struct qca_serdev *qcadev;
struct qca_data *qca = hu->priv;
int ret;
- bool sw_ctrl_state;
/* Non-serdev device usually is powered by external power
* and don't need additional action in driver for power on
@@ -1602,29 +1601,15 @@ static int qca_power_on(struct hci_dev *hdev)
* off the voltage regulator.
*/
qcadev = serdev_device_get_drvdata(hu->serdev);
- if (!qcadev->vregs_on) {
- serdev_device_close(hu->serdev);
- ret = qca_regulator_enable(qcadev);
- if (ret)
- return ret;
-
- ret = serdev_device_open(hu->serdev);
- if (ret) {
- bt_dev_err(hu->hdev, "failed to open port");
- return ret;
- }
- }
+ serdev_device_close(hu->serdev);
+ ret = qca_regulator_enable(qcadev);
+ if (ret)
+ return ret;
- /* For wcn6750 need to enable gpio bt_en */
- if (qcadev->bt_en) {
- gpiod_set_value_cansleep(qcadev->bt_en, 0);
- msleep(50);
- gpiod_set_value_cansleep(qcadev->bt_en, 1);
- msleep(150);
- if (qcadev->sw_ctrl) {
- sw_ctrl_state = gpiod_get_value_cansleep(qcadev->sw_ctrl);
- bt_dev_dbg(hu->hdev, "SW_CTRL is %d", sw_ctrl_state);
- }
+ ret = serdev_device_open(hu->serdev);
+ if (ret) {
+ bt_dev_err(hu->hdev, "failed to open port");
+ return ret;
}
if (qca_is_wcn399x(soc_type)) {
@@ -1856,7 +1841,6 @@ static void qca_power_shutdown(struct hci_uart *hu)
struct qca_data *qca = hu->priv;
unsigned long flags;
enum qca_btsoc_type soc_type = qca_soc_type(hu);
- bool sw_ctrl_state;
/* From this point we go into power off state. But serial port is
* still open, stop queueing the IBS data and flush all the buffered
@@ -1878,18 +1862,8 @@ static void qca_power_shutdown(struct hci_uart *hu)
if (qca_is_wcn399x(soc_type)) {
host_set_baudrate(hu, 2400);
qca_send_power_pulse(hu, false);
- qca_regulator_disable(qcadev);
- } else if (soc_type == QCA_WCN6750) {
- gpiod_set_value_cansleep(qcadev->bt_en, 0);
- msleep(100);
- qca_regulator_disable(qcadev);
- if (qcadev->sw_ctrl) {
- sw_ctrl_state = gpiod_get_value_cansleep(qcadev->sw_ctrl);
- bt_dev_dbg(hu->hdev, "SW_CTRL is %d", sw_ctrl_state);
- }
- } else if (qcadev->bt_en) {
- gpiod_set_value_cansleep(qcadev->bt_en, 0);
}
+ qca_regulator_disable(qcadev);
set_bit(QCA_BT_OFF, &qca->flags);
}
@@ -1919,20 +1893,39 @@ static int qca_regulator_enable(struct qca_serdev *qcadev)
int ret;
/* Already enabled */
- if (qcadev->vregs_on)
- return 0;
+ if (!qcadev->vregs_on) {
+ BT_DBG("enabling %d regulators)", qcadev->num_vregs);
- BT_DBG("enabling %d regulators)", qcadev->num_vregs);
+ ret = regulator_bulk_enable(qcadev->num_vregs, qcadev->vreg_bulk);
+ if (ret)
+ return ret;
- ret = regulator_bulk_enable(qcadev->num_vregs, qcadev->vreg_bulk);
- if (ret)
- return ret;
+ qcadev->vregs_on = true;
- qcadev->vregs_on = true;
+ if (qca_is_wcn399x(qcadev->btsoc_type) ||
+ qca_is_wcn6750(qcadev->btsoc_type)) {
+ ret = clk_prepare_enable(qcadev->susclk);
+ if (ret) {
+ regulator_bulk_disable(qcadev->num_vregs, qcadev->vreg_bulk);
+ return ret;
+ }
+ }
+ }
- ret = clk_prepare_enable(qcadev->susclk);
- if (ret)
- qca_regulator_disable(qcadev);
+ /* For wcn6750 need to enable gpio bt_en */
+ if (qcadev->bt_en) {
+ gpiod_set_value_cansleep(qcadev->bt_en, 0);
+ msleep(50);
+ gpiod_set_value_cansleep(qcadev->bt_en, 1);
+ msleep(150);
+ }
+
+ if (qcadev->sw_ctrl) {
+ bool sw_ctrl_state;
+
+ sw_ctrl_state = gpiod_get_value_cansleep(qcadev->sw_ctrl);
+ bt_dev_dbg(qcadev->serdev_hu.hdev, "SW_CTRL is %d", sw_ctrl_state);
+ }
return ret;
}
@@ -1942,14 +1935,27 @@ static void qca_regulator_disable(struct qca_serdev *qcadev)
if (!qcadev)
return;
+ if (qcadev->bt_en) {
+ gpiod_set_value_cansleep(qcadev->bt_en, 0);
+ msleep(100);
+ }
+
/* Already disabled? */
- if (!qcadev->vregs_on)
- return;
+ if (qcadev->vregs_on) {
+ regulator_bulk_disable(qcadev->num_vregs, qcadev->vreg_bulk);
+ qcadev->vregs_on = false;
- regulator_bulk_disable(qcadev->num_vregs, qcadev->vreg_bulk);
- qcadev->vregs_on = false;
+ if (qca_is_wcn399x(qcadev->btsoc_type) ||
+ qca_is_wcn6750(qcadev->btsoc_type))
+ clk_disable_unprepare(qcadev->susclk);
+ }
+
+ if (qcadev->sw_ctrl) {
+ bool sw_ctrl_state;
- clk_disable_unprepare(qcadev->susclk);
+ sw_ctrl_state = gpiod_get_value_cansleep(qcadev->sw_ctrl);
+ bt_dev_dbg(qcadev->serdev_hu.hdev, "SW_CTRL is %d", sw_ctrl_state);
+ }
}
static int qca_init_regulators(struct qca_serdev *qcadev, struct device *dev,
@@ -2018,17 +2024,17 @@ static int qca_serdev_probe(struct serdev_device *serdev)
}
qcadev->vregs_on = false;
- }
- qcadev->bt_en = devm_gpiod_get_optional(&serdev->dev, "enable",
- GPIOD_OUT_LOW);
- if (!qcadev->bt_en) {
- if (qca_is_wcn6750(data->soc_type)) {
- dev_err(&serdev->dev, "failed to acquire BT_EN gpio\n");
- power_ctrl_enabled = false;
- } else if (!qca_is_wcn399x(data->soc_type)) {
- dev_warn(&serdev->dev, "failed to acquire enable gpio\n");
- power_ctrl_enabled = false;
+ qcadev->bt_en = devm_gpiod_get_optional(&serdev->dev, "enable",
+ GPIOD_OUT_LOW);
+ if (!qcadev->bt_en) {
+ if (qca_is_wcn6750(data->soc_type)) {
+ dev_err(&serdev->dev, "failed to acquire BT_EN gpio\n");
+ power_ctrl_enabled = false;
+ } else if (!qca_is_wcn399x(data->soc_type)) {
+ dev_warn(&serdev->dev, "failed to acquire enable gpio\n");
+ power_ctrl_enabled = false;
+ }
}
}
--
2.30.2
Powered by blists - more mailing lists