| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <CAPDyKFp+9Bv3EVSnV683ixNXzukJtmG_QrS5C1ZQqLxv9QJ-bQ@mail.gmail.com>
Date: Wed, 18 Aug 2021 10:35:11 +0200
From: Ulf Hansson <ulf.hansson@...aro.org>
To: Thierry Reding <thierry.reding@...il.com>
Cc: Dmitry Osipenko <digetx@...il.com>,
Jonathan Hunter <jonathanh@...dia.com>,
Viresh Kumar <vireshk@...nel.org>,
Stephen Boyd <sboyd@...nel.org>,
Peter De Schrijver <pdeschrijver@...dia.com>,
Mikko Perttunen <mperttunen@...dia.com>,
Peter Chen <peter.chen@...nel.org>,
Mark Brown <broonie@...nel.org>,
Lee Jones <lee.jones@...aro.org>,
Uwe Kleine-König
<u.kleine-koenig@...gutronix.de>, Nishanth Menon <nm@...com>,
Vignesh Raghavendra <vigneshr@...com>,
Richard Weinberger <richard@....at>,
Miquel Raynal <miquel.raynal@...tlin.com>,
Lucas Stach <dev@...xeye.de>, Stefan Agner <stefan@...er.ch>,
Adrian Hunter <adrian.hunter@...el.com>,
Mauro Carvalho Chehab <mchehab@...nel.org>,
Rob Herring <robh+dt@...nel.org>,
Michael Turquette <mturquette@...libre.com>,
Linux Kernel Mailing List <linux-kernel@...r.kernel.org>,
linux-tegra <linux-tegra@...r.kernel.org>,
Linux PM <linux-pm@...r.kernel.org>,
Linux USB List <linux-usb@...r.kernel.org>,
linux-staging@...ts.linux.dev, linux-spi@...r.kernel.org,
linux-pwm@...r.kernel.org, linux-mtd@...ts.infradead.org,
linux-mmc <linux-mmc@...r.kernel.org>,
Linux Media Mailing List <linux-media@...r.kernel.org>,
dri-devel <dri-devel@...ts.freedesktop.org>,
DTML <devicetree@...r.kernel.org>,
linux-clk <linux-clk@...r.kernel.org>
Subject: Re: [PATCH v8 11/34] gpu: host1x: Add runtime PM and OPP support
On Tue, 17 Aug 2021 at 16:03, Thierry Reding <thierry.reding@...il.com> wrote:
>
> On Tue, Aug 17, 2021 at 02:04:38PM +0200, Ulf Hansson wrote:
> > On Tue, 17 Aug 2021 at 03:30, Dmitry Osipenko <digetx@...il.com> wrote:
> > >
> > > Add runtime PM and OPP support to the Host1x driver. It's required for
> > > enabling system-wide DVFS and supporting dynamic power management using
> > > a generic power domain. For the starter we will keep host1x always-on
> > > because dynamic power management require a major refactoring of the driver
> > > code since lot's of code paths will need the RPM handling and we're going
> > > to remove some of these paths in the future. Host1x doesn't consume much
> > > power so it is good enough, we at least need to resume Host1x in order
> > > to initialize the power state.
> > >
> > > Tested-by: Peter Geis <pgwipeout@...il.com> # Ouya T30
> > > Tested-by: Paul Fertser <fercerpav@...il.com> # PAZ00 T20
> > > Tested-by: Nicolas Chauvet <kwizart@...il.com> # PAZ00 T20 and TK1 T124
> > > Tested-by: Matt Merhar <mattmerhar@...tonmail.com> # Ouya T30
> > > Signed-off-by: Dmitry Osipenko <digetx@...il.com>
> > > ---
> >
> > [...]
> >
> > > +
> > > static int host1x_probe(struct platform_device *pdev)
> > > {
> > > struct host1x *host;
> > > @@ -394,6 +423,10 @@ static int host1x_probe(struct platform_device *pdev)
> > > /* set common host1x device data */
> > > platform_set_drvdata(pdev, host);
> > >
> > > + err = devm_tegra_core_dev_init_opp_table_simple(&pdev->dev);
> > > + if (err)
> > > + return err;
> > > +
> > > host->regs = devm_ioremap_resource(&pdev->dev, regs);
> > > if (IS_ERR(host->regs))
> > > return PTR_ERR(host->regs);
> > > @@ -423,12 +456,9 @@ static int host1x_probe(struct platform_device *pdev)
> > > return err;
> > > }
> > >
> > > - host->rst = devm_reset_control_get(&pdev->dev, "host1x");
> > > - if (IS_ERR(host->rst)) {
> > > - err = PTR_ERR(host->rst);
> > > - dev_err(&pdev->dev, "failed to get reset: %d\n", err);
> > > + err = host1x_get_resets(host);
> > > + if (err)
> > > return err;
> > > - }
> > >
> > > err = host1x_iommu_init(host);
> > > if (err < 0) {
> > > @@ -443,22 +473,10 @@ static int host1x_probe(struct platform_device *pdev)
> > > goto iommu_exit;
> > > }
> > >
> > > - err = clk_prepare_enable(host->clk);
> > > - if (err < 0) {
> > > - dev_err(&pdev->dev, "failed to enable clock\n");
> > > - goto free_channels;
> > > - }
> > > -
> > > - err = reset_control_deassert(host->rst);
> > > - if (err < 0) {
> > > - dev_err(&pdev->dev, "failed to deassert reset: %d\n", err);
> > > - goto unprepare_disable;
> > > - }
> > > -
> >
> > Removing the clk_prepare_enable() and reset_control_deassert() from
> > host1x_probe(), might not be a good idea. See more about why, below.
> >
> > > err = host1x_syncpt_init(host);
> > > if (err) {
> > > dev_err(&pdev->dev, "failed to initialize syncpts\n");
> > > - goto reset_assert;
> > > + goto free_channels;
> > > }
> > >
> > > err = host1x_intr_init(host, syncpt_irq);
> > > @@ -467,10 +485,14 @@ static int host1x_probe(struct platform_device *pdev)
> > > goto deinit_syncpt;
> > > }
> > >
> > > - host1x_debug_init(host);
> > > + pm_runtime_enable(&pdev->dev);
> > >
> > > - if (host->info->has_hypervisor)
> > > - host1x_setup_sid_table(host);
> > > + /* the driver's code isn't ready yet for the dynamic RPM */
> > > + err = pm_runtime_resume_and_get(&pdev->dev);
> >
> > If the driver is being built with the CONFIG_PM Kconfig option being
> > unset, pm_runtime_resume_and_get() will return 0 to indicate success -
> > and without calling the ->runtime_resume() callback.
> > In other words, the clock will remain gated and the reset will not be
> > deasserted, likely causing the driver to be malfunctioning.
> >
> > If the driver isn't ever being built with CONFIG_PM unset, feel free
> > to ignore my above comments.
> >
> > Otherwise, if it needs to work both with and without CONFIG_PM being
> > set, you may use the following pattern in host1x_probe() to deploy
> > runtime PM support:
> >
> > "Enable the needed resources to probe the device"
> > pm_runtime_get_noresume()
> > pm_runtime_set_active()
> > pm_runtime_enable()
> >
> > "Before successfully completing probe"
> > pm_runtime_put()
>
> We made a conscious decision a few years ago to have ARCH_TEGRA select
> PM on both 32-bit and 64-bit ARM, specifically to avoid the need to do
> this dance (though there are still a few drivers left that do this, I
> think).
>
> So I think this should be unnecessary. Unless perhaps if the sysfs PM
> controls have any influence on this. As far as I know, as long as the
> PM kconfig option is enabled, the sysfs control only influence the
> runtime behaviour (i.e. setting the sysfs PM control to "on" is going
> to force runtime PM to be resumed) but there's no way to disable
> runtime PM altogether via sysfs that would make the above necessary.
Thanks for clarifying! As I said, feel free to ignore my comments then.
For this and the other patches in the series, I assume you only need
to care about whether the driver is a cross SoC driver and used on
other platforms than Tegra then.
>
> Thierry
Kind regards
Uffe
Powered by blists - more mailing lists