linux-kernel - [PATCH] PCI: mediatek-gen3: Disable DVFSRC voltage request

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [thread-next>] [day] [month] [year] [list]

Message-ID: <20210819125939.21253-1-jianjun.wang@mediatek.com>
Date:   Thu, 19 Aug 2021 20:59:39 +0800
From:   Jianjun Wang <jianjun.wang@...iatek.com>
To:     Lorenzo Pieralisi <lorenzo.pieralisi@....com>,
        Rob Herring <robh+dt@...nel.org>,
        Krzysztof Wilczyski <kw@...ux.com>,
        Bjorn Helgaas <bhelgaas@...gle.com>,
        Ryder Lee <ryder.lee@...iatek.com>,
        Matthias Brugger <matthias.bgg@...il.com>
CC:     <linux-pci@...r.kernel.org>, <linux-mediatek@...ts.infradead.org>,
        <linux-kernel@...r.kernel.org>,
        <linux-arm-kernel@...ts.infradead.org>,
        Jianjun Wang <jianjun.wang@...iatek.com>,
        <qizhong.cheng@...iatek.com>, <Ryan-JH.Yu@...iatek.com>
Subject: [PATCH] PCI: mediatek-gen3: Disable DVFSRC voltage request

When the DVFSRC feature is not implemented, the MAC layer will
assert a voltage request signal when exit from the L1ss state,
but cannot receive the voltage ready signal, which will cause
the link to fail to exit the L1ss state correctly.

Disable DVFSRC voltage request by default, we need to find
a common way to enable it in the future.

Signed-off-by: Jianjun Wang <jianjun.wang@...iatek.com>
---
 drivers/pci/controller/pcie-mediatek-gen3.c | 8 ++++++++
 1 file changed, 8 insertions(+)

diff --git a/drivers/pci/controller/pcie-mediatek-gen3.c b/drivers/pci/controller/pcie-mediatek-gen3.c
index f3aeb8d4eaca..79fb12fca6a9 100644
--- a/drivers/pci/controller/pcie-mediatek-gen3.c
+++ b/drivers/pci/controller/pcie-mediatek-gen3.c
@@ -79,6 +79,9 @@
 #define PCIE_ICMD_PM_REG		0x198
 #define PCIE_TURN_OFF_LINK		BIT(4)
 
+#define PCIE_MISC_CTRL_REG		0x348
+#define PCIE_DISABLE_DVFSRC_VLT_REQ	BIT(1)
+
 #define PCIE_TRANS_TABLE_BASE_REG	0x800
 #define PCIE_ATR_SRC_ADDR_MSB_OFFSET	0x4
 #define PCIE_ATR_TRSL_ADDR_LSB_OFFSET	0x8
@@ -297,6 +300,11 @@ static int mtk_pcie_startup_port(struct mtk_pcie_port *port)
 	val &= ~PCIE_INTX_ENABLE;
 	writel_relaxed(val, port->base + PCIE_INT_ENABLE_REG);
 
+	/* Disable DVFSRC voltage request */
+	val = readl_relaxed(port->base + PCIE_MISC_CTRL_REG);
+	val |= PCIE_DISABLE_DVFSRC_VLT_REQ;
+	writel_relaxed(val, port->base + PCIE_MISC_CTRL_REG);
+
 	/* Assert all reset signals */
 	val = readl_relaxed(port->base + PCIE_RST_CTRL_REG);
 	val |= PCIE_MAC_RSTB | PCIE_PHY_RSTB | PCIE_BRG_RSTB | PCIE_PE_RSTB;
-- 
2.18.0