| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-Id: <20210820133829.1.Ica46f428de8c3beb600760dbcd63cf879ec24baf@changeid>
Date: Fri, 20 Aug 2021 13:38:35 -0700
From: Brian Norris <briannorris@...omium.org>
To: Heiko Stuebner <heiko@...ech.de>
Cc: linux-arm-kernel@...ts.infradead.org, linux-kernel@...r.kernel.org,
devicetree@...r.kernel.org, linux-rockchip@...ts.infradead.org,
Brian Norris <briannorris@...omium.org>
Subject: [PATCH] arm64: dts: rockchip: add RK3399 Gru gpio-line-names
It's convenient to get nice names for GPIOs. In particular, Chrome OS
tooling looks for "AP_FLASH_WP" and "AP_FLASH_WP_L". The rest are
provided for convenience.
Gru-Bob and Gru-Kevin share the gru-chromebook.dtsi, and for the most
part they share pin meanings. I omitted a few areas where components
were available only on one or the other.
Signed-off-by: Brian Norris <briannorris@...omium.org>
---
.../dts/rockchip/rk3399-gru-chromebook.dtsi | 176 +++++++++++++++++
.../boot/dts/rockchip/rk3399-gru-scarlet.dtsi | 180 ++++++++++++++++++
2 files changed, 356 insertions(+)
diff --git a/arch/arm64/boot/dts/rockchip/rk3399-gru-chromebook.dtsi b/arch/arm64/boot/dts/rockchip/rk3399-gru-chromebook.dtsi
index 1384dabbdf40..9b2c679f5eca 100644
--- a/arch/arm64/boot/dts/rockchip/rk3399-gru-chromebook.dtsi
+++ b/arch/arm64/boot/dts/rockchip/rk3399-gru-chromebook.dtsi
@@ -251,6 +251,182 @@ edp_out_panel: endpoint@0 {
};
};
+&gpio0 {
+ gpio-line-names = /* GPIO0 A 0-7 */
+ "AP_RTC_CLK_IN",
+ "EC_AP_INT_L",
+ "PP1800_AUDIO_EN",
+ "BT_HOST_WAKE_L",
+ "WLAN_MODULE_PD_L",
+ "H1_INT_OD_L",
+ "CENTERLOGIC_DVS_PWM",
+ "",
+
+ /* GPIO0 B 0-4 */
+ "WIFI_HOST_WAKE_L",
+ "PMUIO2_33_18_L",
+ "PP1500_EN",
+ "AP_EC_WARM_RESET_REQ",
+ "PP3000_EN";
+};
+
+&gpio1 {
+ gpio-line-names = /* GPIO1 A 0-7 */
+ "",
+ "",
+ "SPK_PA_EN",
+ "",
+ "TRACKPAD_INT_L",
+ "AP_EC_S3_S0_L",
+ "AP_EC_OVERTEMP",
+ "AP_SPI_FLASH_MISO",
+
+ /* GPIO1 B 0-7 */
+ "AP_SPI_FLASH_MOSI_R",
+ "AP_SPI_FLASH_CLK_R",
+ "AP_SPI_FLASH_CS_L_R",
+ "WLAN_MODULE_RESET_L",
+ "WIFI_DISABLE_L",
+ "MIC_INT",
+ "",
+ "AP_I2C_DVS_SDA",
+
+ /* GPIO1 C 0-7 */
+ "AP_I2C_DVS_SCL",
+ "AP_BL_EN",
+ /*
+ * AP_FLASH_WP is crossystem ABI. Schematics call it
+ * AP_FW_WP or CPU1_FW_WP, depending on the variant.
+ */
+ "AP_FLASH_WP",
+ "LITCPU_DVS_PWM",
+ "AP_I2C_AUDIO_SDA",
+ "AP_I2C_AUDIO_SCL",
+ "",
+ "HEADSET_INT_L";
+};
+
+&gpio2 {
+ gpio-line-names = /* GPIO2 A 0-7 */
+ "",
+ "",
+ "SD_IO_PWR_EN",
+ "",
+ "",
+ "",
+ "",
+ "",
+
+ /* GPIO2 B 0-7 */
+ "",
+ "",
+ "",
+ "",
+ "",
+ "",
+ "",
+ "",
+
+ /* GPIO2 C 0-7 */
+ "",
+ "",
+ "",
+ "",
+ "AP_SPI_EC_MISO",
+ "AP_SPI_EC_MOSI",
+ "AP_SPI_EC_CLK",
+ "AP_SPI_EC_CS_L",
+
+ /* GPIO2 D 0-4 */
+ "BT_DEV_WAKE_L",
+ "",
+ "WIFI_PCIE_CLKREQ_L",
+ "WIFI_PERST_L",
+ "SD_PWR_3000_1800_L";
+};
+
+&gpio3 {
+ gpio-line-names = /* GPIO3 A 0-7 */
+ "",
+ "",
+ "",
+ "",
+ "AP_SPI_TPM_MISO",
+ "AP_SPI_TPM_MOSI_R",
+ "AP_SPI_TPM_CLK_R",
+ "AP_SPI_TPM_CS_L_R",
+
+ /* GPIO3 B 0-7 */
+ "EC_IN_RW",
+ "",
+ "AP_I2C_TP_SDA",
+ "AP_I2C_TP_SCL",
+ "AP_I2C_TP_PU_EN",
+ "TOUCH_INT_L",
+ "",
+ "",
+
+ /* GPIO3 C 0-7 */
+ "",
+ "",
+ "",
+ "",
+ "",
+ "",
+ "",
+ "",
+
+ /* GPIO3 D 0-7 */
+ "I2S0_SCLK",
+ "I2S0_LRCK_RX",
+ "I2S0_LRCK_TX",
+ "I2S0_SDI_0",
+ "I2S0_SDI_1",
+ "",
+ "I2S0_SDO_1",
+ "I2S0_SDO_0";
+};
+
+&gpio4 {
+ gpio-line-names = /* GPIO4 A 0-7 */
+ "I2S_MCLK",
+ "AP_I2C_MIC_SDA",
+ "AP_I2C_MIC_SCL",
+ "",
+ "",
+ "",
+ "",
+ "",
+
+ /* GPIO4 B 0-7 */
+ "",
+ "",
+ "",
+ "",
+ "",
+ "",
+ "",
+ "",
+
+ /* GPIO4 C 0-7 */
+ "AP_I2C_TS_SDA",
+ "AP_I2C_TS_SCL",
+ "GPU_DVS_PWM",
+ "UART_DBG_TX_AP_RX",
+ "UART_AP_TX_DBG_RX",
+ "",
+ "BIGCPU_DVS_PWM",
+ "EDP_HPD_3V0",
+
+ /* GPIO4 D 0-5 */
+ "SD_CARD_DET_L",
+ "USB_DP_HPD",
+ "TOUCH_RESET_L",
+ "PP3300_DISP_EN",
+ "",
+ "SD_SLOT_PWR_EN";
+};
+
ap_i2c_mic: &i2c1 {
status = "okay";
diff --git a/arch/arm64/boot/dts/rockchip/rk3399-gru-scarlet.dtsi b/arch/arm64/boot/dts/rockchip/rk3399-gru-scarlet.dtsi
index 5d7a9d96d163..61afb5f0f15b 100644
--- a/arch/arm64/boot/dts/rockchip/rk3399-gru-scarlet.dtsi
+++ b/arch/arm64/boot/dts/rockchip/rk3399-gru-scarlet.dtsi
@@ -389,6 +389,186 @@ &cru {
<400000000>;
};
+&gpio0 {
+ gpio-line-names = /* GPIO0 A 0-7 */
+ "CLK_32K_AP",
+ "EC_IN_RW_OD",
+ "SPK_PA_EN",
+ "WLAN_PERST_1V8_L",
+ "WLAN_PD_1V8_L",
+ "WLAN_RF_KILL_1V8_L",
+ "BIGCPU_DVS_PWM",
+ "SD_CD_L_JTAG_EN",
+
+ /* GPIO0 B 0-5 */
+ "BT_EN_BT_RF_KILL_1V8_L",
+ "PMUIO2_33_18_L_PP3300_S0_EN",
+ "TOUCH_RESET_L",
+ "AP_EC_WARM_RESET_REQ",
+ "PEN_RESET_L",
+ /*
+ * AP_FLASH_WP_L is crossystem ABI. Schematics call
+ * it AP_FLASH_WP_R_ODL.
+ */
+ "AP_FLASH_WP_L";
+};
+
+&gpio1 {
+ gpio-line-names = /* GPIO1 A 0-7 */
+ "PEN_INT_ODL",
+ "PEN_EJECT_ODL",
+ "BT_HOST_WAKE_1V8_L",
+ "WLAN_HOST_WAKE_1V8_L",
+ "TOUCH_INT_ODL",
+ "AP_EC_S3_S0_L",
+ "AP_EC_OVERTEMP",
+ "AP_SPI_FLASH_MISO",
+
+ /* GPIO1 B 0-7 */
+ "AP_SPI_FLASH_MOSI_R",
+ "AP_SPI_FLASH_CLK_R",
+ "AP_SPI_FLASH_CS_L_R",
+ "SD_CARD_DET_ODL",
+ "",
+ "AP_EXPANSION_IO1",
+ "AP_EXPANSION_IO2",
+ "AP_I2C_DISP_SDA",
+
+ /* GPIO1 C 0-7 */
+ "AP_I2C_DISP_SCL",
+ "H1_INT_ODL",
+ "EC_AP_INT_ODL",
+ "LITCPU_DVS_PWM",
+ "AP_I2C_AUDIO_SDA",
+ "AP_I2C_AUDIO_SCL",
+ "AP_EXPANSION_IO3",
+ "HEADSET_INT_ODL",
+
+ /* GPIO1 D0 */
+ "AP_EXPANSION_IO4";
+};
+
+&gpio2 {
+ gpio-line-names = /* GPIO2 A 0-7 */
+ "AP_I2C_PEN_SDA",
+ "AP_I2C_PEN_SCL",
+ "SD_IO_PWR_EN",
+ "UCAM_RST_L",
+ "PP1250_CAM_EN",
+ "WCAM_RST_L",
+ "AP_EXPANSION_IO5",
+ "AP_I2C_CAM_SDA",
+
+ /* GPIO2 B 0-7 */
+ "AP_I2C_CAM_SCL",
+ "AP_H1_SPI_MISO",
+ "AP_H1_SPI_MOSI",
+ "AP_H1_SPI_CLK",
+ "AP_H1_SPI_CS_L",
+ "",
+ "",
+ "",
+
+ /* GPIO2 C 0-7 */
+ "UART_EXPANSION_TX_AP_RX",
+ "UART_AP_TX_EXPANSION_RX",
+ "UART_EXPANSION_RTS_AP_CTS",
+ "UART_AP_RTS_EXPANSION_CTS",
+ "AP_SPI_EC_MISO",
+ "AP_SPI_EC_MOSI",
+ "AP_SPI_EC_CLK",
+ "AP_SPI_EC_CS_L",
+
+ /* GPIO2 D 0-4 */
+ "PP2800_CAM_EN",
+ "CLK_24M_CAM",
+ "WLAN_PCIE_CLKREQ_1V8_L",
+ "",
+ "SD_PWR_3000_1800_L";
+};
+
+&gpio3 {
+ gpio-line-names = /* GPIO3 A 0-7 */
+ "",
+ "",
+ "",
+ "",
+ "",
+ "",
+ "",
+ "",
+
+ /* GPIO3 B 0-7 */
+ "",
+ "",
+ "",
+ "",
+ "",
+ "",
+ "",
+ "",
+
+ /* GPIO3 C 0-7 */
+ "",
+ "",
+ "",
+ "",
+ "",
+ "",
+ "",
+ "",
+
+ /* GPIO3 D 0-7 */
+ "I2S0_SCLK",
+ "I2S0_LRCK_RX",
+ "I2S0_LRCK_TX",
+ "I2S0_SDI_0",
+ "STRAP_LCDBIAS_L",
+ "STRAP_FEATURE_1",
+ "STRAP_FEATURE_2",
+ "I2S0_SDO_0";
+};
+
+&gpio4 {
+ gpio-line-names = /* GPIO4 A 0-7 */
+ "I2S_MCLK",
+ "AP_I2C_EXPANSION_SDA",
+ "AP_I2C_EXPANSION_SCL",
+ "DMIC_EN",
+ "",
+ "",
+ "",
+ "",
+
+ /* GPIO4 B 0-7 */
+ "",
+ "",
+ "",
+ "",
+ "",
+ "",
+ "",
+ "",
+
+ /* GPIO4 C 0-7 */
+ "AP_I2C_TS_SDA",
+ "AP_I2C_TS_SCL",
+ "GPU_DVS_PWM",
+ "UART_DBG_TX_AP_RX",
+ "UART_AP_TX_DBG_RX",
+ "BL_EN",
+ "BL_PWM",
+ "",
+
+ /* GPIO4 D 0-5 */
+ "",
+ "DISPLAY_RST_L",
+ "",
+ "PPVARP_LCD_EN",
+ "PPVARN_LCD_EN",
+ "SD_SLOT_PWR_EN";
+};
+
&i2c_tunnel {
google,remote-bus = <0>;
};
--
2.33.0.rc2.250.ged5fa647cd-goog
Powered by blists - more mailing lists