[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <88915cc5-a2b7-4971-f9a1-a98bd944d5e7@ti.com>
Date: Fri, 20 Aug 2021 16:05:27 +0530
From: Apurva Nandan <a-nandan@...com>
To: Miquel Raynal <miquel.raynal@...tlin.com>
CC: Richard Weinberger <richard@....at>,
Vignesh Raghavendra <vigneshr@...com>,
Mark Brown <broonie@...nel.org>,
Patrice Chotard <patrice.chotard@...s.st.com>,
Boris Brezillon <boris.brezillon@...labora.com>,
<linux-mtd@...ts.infradead.org>, <linux-kernel@...r.kernel.org>,
<linux-spi@...r.kernel.org>, Pratyush Yadav <p.yadav@...com>
Subject: Re: [PATCH 06/13] mtd: spinand: Add macros for Octal DTR page read
and write operations
Hi Miquèl,
On 07/08/21 12:24 am, Miquel Raynal wrote:
> Hi Apurva,
>
> Apurva Nandan <a-nandan@...com> wrote on Tue, 13 Jul 2021 13:05:31
> +0000:
>
>> Define new PAGE_READ_FROM_CACHE and PROG_LOAD op templates for Octal
>> DTR SPI mode. These templates would used in op_variants and
>
> will be
>
Yeah, ok!
>> op_templates for defining Octal DTR read from cache and write to
>> cache operations.
>>
>> Datasheet: https://www.winbond.com/export/sites/winbond/datasheet/W35N01JW_Datasheet_Brief.pdf
>>
>> Signed-off-by: Apurva Nandan <a-nandan@...com>
>> ---
>> include/linux/mtd/spinand.h | 12 ++++++++++++
>> 1 file changed, 12 insertions(+)
>>
>> diff --git a/include/linux/mtd/spinand.h b/include/linux/mtd/spinand.h
>> index ebb19b2cec84..35816b8cfe81 100644
>> --- a/include/linux/mtd/spinand.h
>> +++ b/include/linux/mtd/spinand.h
>> @@ -122,6 +122,12 @@
>> SPI_MEM_OP_DUMMY(ndummy, 4), \
>> SPI_MEM_OP_DATA_IN(len, buf, 4))
>>
>> +#define SPINAND_PAGE_READ_FROM_CACHE_OCTALIO_DTR_OP(addr, ndummy, buf, len) \
>> + SPI_MEM_OP(SPI_MEM_OP_CMD_DTR(2, 0x9d9d, 8), \
>> + SPI_MEM_OP_ADDR_DTR(2, addr, 8), \
>> + SPI_MEM_OP_DUMMY_DTR(ndummy, 8), \
>> + SPI_MEM_OP_DATA_IN_DTR(len, buf, 8))
>> +
>> #define SPINAND_PROG_EXEC_OP(addr) \
>> SPI_MEM_OP(SPI_MEM_OP_CMD(0x10, 1), \
>> SPI_MEM_OP_ADDR(3, addr, 1), \
>> @@ -140,6 +146,12 @@
>> SPI_MEM_OP_NO_DUMMY, \
>> SPI_MEM_OP_DATA_OUT(len, buf, 4))
>>
>> +#define SPINAND_PROG_LOAD_OCTALIO_DTR(reset, addr, buf, len) \
>> + SPI_MEM_OP(SPI_MEM_OP_CMD_DTR(2, reset ? 0x0202 : 0x8484, 8), \
>> + SPI_MEM_OP_ADDR_DTR(2, addr, 8), \
>> + SPI_MEM_OP_NO_DUMMY, \
>> + SPI_MEM_OP_DATA_OUT_DTR(len, buf, 8))
>> +
>> #define SPINAND_PROTO_BUSWIDTH_MASK GENMASK(6, 0)
>> #define SPINAND_PROTO_DTR_BIT BIT(7)
>>
>
> Thanks,
> Miquèl
>
> ______________________________________________________
> Linux MTD discussion mailing list
> http://lists.infradead.org/mailman/listinfo/linux-mtd/
>
Thanks,
Apurva Nandan
Powered by blists - more mailing lists